HEADER PARTS PHONE: FAX:

Transcription

1 HEADER PARTS Catalogue PHONE: FAX:

2 Harvestaire is a Western Australian owned operation marketing products across Australia. Phone: Fax: After Hours: Dean Brooks - Mobile:

3 Contents Actuators - Electric Linear Air Reels Auger Extensions Bars - Gorden Rotor Bars Bars - Rotor Bars & Drum bars Bars - Wear Bats - Header Reel Bats Belting - Draper Front & Pickup Belts Belts - V Belt - Heavy Duty Bracket GPS, 2 Way & Touch Screens Breakers for Canola & Lupin Canola Vertical Knife Canola - Sieves Chaff Spreader - Cyclone Crary type Chain - Roller Chains - Feeder Chains - Grain Elevator Chopper - MAV Straw Chopper/Spreader Chopper Blades Winged type & NH OEM Blades... 31& 81 Concaves - Helical Concaves - Conventional & Axial Flow Crop-lifters Fingers Plastic Extension Grain Tank Extensions - Big Top... 7 Hydraulic Multi Coupler Knife Drive - (SCH) Knife Guard Lifter Kits Knife Guards Knife Sections, Heads & Hardware Knives - Laminated & Solid Backbone Meters Moisture PTO Shafts & Yokes Pulleys - Idler Reels - Tyne & Parts (Hart Carter, Universal & Macdon) Rollers - For Draper Belting Rollers Posi-feed Rotor Blade Kits AFX (Elephant Ears) Sieves - Bottom Sieves - Gorden Air Jet Sieves - Top Sprockets - Feeder Chain & Stripper Kits Sprockets - Grain Elevator Chain Trays Sorghum & Sunflower Replacement Parts Harvestaire is Proudly Australian Owned and Operated Augers Feeder House Parts Rotor Parts Engine Parts Hydraulic Parts Steering Parts Retractable Fingers General Parts Wind Fan Parts Transmission and Final Drive Parts Case-IH Honeybee, Midwest, Macdon Draper Platforms John Deere New Holland Massey Ferguson/Agco/Allis Website: 1

4 Tyne Reels We are an Australian distributor for Hart Carter and carry a large stock of Reels and Parts. Hart Carter Reels are supplied to John Deere, Case-IH, New Holland, Honey Bee and Agco as original equipment. Modern clean design for optimum crop flow. Tube bats for maximum strength and ease of repair. Visibility is excellent. Tyne Reels perform in the toughest crop conditions. Down, tangled or heavy crops will all be fed by a Tyne Reel. Beat those losses and harvest inefficiencies caused by bat reels. Adjustable pitch of the tynes enables fine tuning to reduce harvest losses caused at the reel including crop carried over the back of the comb. Conversion to steel tynes available for those really heavy crop conditions. Non-glare long life powder coating minimises operator fatigue. Flexible tynes they will work even if coming into contact with the ground and yet flexible enough not to overload the reel. Hard wearing and UV stabilised. Any contact with the knife will not cause disasters like steel tynes. Optional Paddle Tyne For Light Crops (Replaces 20% of Standard Tynes) 2 Prices exclude GST (08)

5 Tyne Reels Order No. Description Model Application Price Agco/Allis HATR581 Reel 30ft Agco/Allis all 30ft Fronts except Draper 6 Bar Reel $6250 Including a HATR069 fitting kit for Series 3 Fronts or a HATR225 fitting kit for Series 4 Fronts Case-ih HATR561 Reel 25ft Case-IH ft 6 Bar Reel $5800 Including a HATR431 fitting kit for pre-1995 models or a HATR216 fitting kit for 1995 and later models. HATR581 Reel 30ft Case-IH 1010, ft 6 Bar Reel $6000 Including a HATR431 fitting kit for pre-1995 models or a HATR163 fitting kit for 1995 and later models HATR560 Reel 25ft Case-IH 2010, ft 6 Bar Reel $5800 Including a HATR323 fitting kit HATR580 Reel 30ft Case-IH 2010, ft 6 Bar Reel $6000 Including a HATR323 fitting kit Honeybee (or New Holland belt front) hatr582 Reel 30ft Honeybee 30ft 6 Bar Reel $6000 Including a HATR227 fitting kit HATR034 Reels 36ft (HATR034 + HATR534) Honeybee 36ft Split Reels 6 Bar Reel $7500 Including a HATR231 fitting kit Complete HATR546 Reels 42ft (HATR546 + HATR046) Honeybee 42ft Split Reels 6 Bar Reel $8000 Including a HATR231 fitting kit Complete HATR552 Reels 45ft (HATR552 + HATR102) Honeybee 45ft Split Reels 6 Bar Reel $9250 Including a HATR326 kit Complete John Deere HATR562 Reel 25ft John Deere ft 6 Bar Reel $5800 Including a HATR504 fitting kit hatr580 Reel 30ft John Deere 230 and ft 6 Bar Reel $6000 Including a HATR461 or a HATR504 fitting kit HATR056 Reel 24ft John Deere 224 & ft 6 Bar Reel $6000 Including a HATR416 fitting kit HATR582 Reel 30ft 8 Centre Barrel JD630 Rigid 30ft 6 Bar Reel $6000 Including a HATR508 fitting kit for 630 JD930D Draper 30ft or HATR198 for 930D HATR035 Reel 30ft 10 Centre Barrel JD630 Draper 30ft 6 Bar Reel $8250 Including a HATR506 fitting kit HATR023 Reel 35ft One Piece 10 Centre Barrel JD935D Draper 35ft 6 Bar Reel $7500 Including HATR527 fitting kit HATR076 Reel 36ft One Piece 10 Centre Barrel JD936D Draper 36ft 6 Bar Reel $7500 Including a HATR506 fitting kit Macdon (or Case-IH belt front) hatr581 Reel 30ft Macdon 30ft Swather or Harvester 6 Bar Reel $6000 Including a HATR485 fitting kit HATR500 Reels 36ft (HATR500 + HATR510) Macdon 36ft Split Reels 6 Bar Reels $9000 Including HATR515 fitting kit Specify model Macdon 960, 962, 972, 973 Complete (Does not include For/Aft Brackets) Case-IH 1040, 1042, 1052, 2052 Midwest Reels and parts are available for MidWest Platforms New Holland HATR580 Reel 30ft New Holland 971, 973 Front 30ft 6 Bar Reel $6000 Including HATR199 Reels include Reel Arm Brackets but not For/Aft Hydraulic Cylinders, Hoses or Hydraulic Motor Drives, Chains or Sprockets. (08) Prices exclude GST 3

6 Reel Tynes 112mm 4 1 /2 152mm 6 RT-551 RT-013 RT-804 RT-525 RT-183 RT-409 RT-630 UHC-211 RT-767 RT-985 RT-139 HC RT-434 RT-987 Order No. Description and Model Application Price RT-551 John Deere, New Holland, Honeybee, Agco/Allis & Case-IH. suits almost all Reels sold on these machines $4 with Pipe Bats (Hart Carter Reels) 4 1 / 2, 112mm spacing RT-013 Auxillary Tyne. Fitted to left and right ends of Hart Carter Reels $11 RT-804 John Deere Rigid and Draper, New Holland, Honeybee, Agco/Allis & Case-IH. $4 Latest model Hart Carter Reels 6, 152mm spacing Level 2 Reels 1999 onwards RT-525 John Deere, New Holland, Agco/Allis & Case-IH. All models with Pipe Batts. $6 Alternative to RT551 for very heavy or down crops RT-183 Case-International 810 or 1010 or other makes & models with wooden bats replaces steel spring tynes $4 (Comes with bolts and nuts for attachment) RT-409 Case International with LOVE Reel, Horwood Bagshaw with LOVE Reel $6 RT-630 Honeybee fitted with Universal Harvester (U2) Reel $4 UHC-211 Wire Tyne 8 Honeybee fitted with Universal Harvester (U2) Reel $4 RT-767 Early Agco/Allis R50, R60, R70, C-IH 1020, some JD900 Series, NH971 early $4 RT-985 Macdon MC Used on Macdon Reels prior 2001, Case-IH Belt Fronts prior /1040, 962, 1042 $3 RT-139 Macdon CXM Used on Macdon Reels 2001 onwards excluding D60 model $6 HC Case-IH 1010 reels with wooden bats Steel Tyne $4 HC Tyne Clip suits HC Steel Tyne on wooden bat $0.60 RT-434 Macdon , Case-IH suits 42mm Diameter Pipe on Case-IH 2152, 2162, D60 and New Holland 83C Draper Fronts $5 RT-987 Macdon , Case-IH suits 42mm Diameter Pipe on Case-IH 2152, 2162, D60 and New Holland 83C Draper Fronts $13 Heavy Duty Version on Case-IH and New Holland Draper Fronts HPNH 1149 New Holland 806 Finger Reels Steel 2 Prong Tyne $6 HPNH 1106 New Holland All European Pick up Reels, 1500 Series, 705 & 805 Fronts, Steel 2 Prong Tyne $7 HC Paddle Tyne Level 1 Hart Carter Reel ( ). For light crops use approximately 60 on a 30ft front $6 HC Paddle Tyne Level 2 Hart Carter Reel (1999 onwards). For light crops use approximately 60 on a 30ft front $6 4 Prices exclude GST (08)

7 Hart Carter Tyne Reel Parts HC ft centre tube $1750 including welded flanges or lugs (detail model being fitted to) CTERW30 30ft centre tube No Flanges $ Diameter HC ft centre tube including welded lugs $2450 Suits JD 36ft Draper Front (10 diameter) 25ft tyne bars available prior to 1999 or after Please Enquire HC ft tyne bar (no tynes or end cranks) $290 Suits mm Level 1 (Prior 1999) 41/2 Tyne Spacing HC ft tyne bar (no tynes or end cranks) $290 Suits mm Level 1 (Prior 1999) 41/2 Tyne Spacing HC ft tyne bar (no tynes or end cranks) $290 Suits mm Level 1 (Prior 1999) 41/2 Tyne Spacing HC ft tyne bar (no tynes) $300 Suits mm Level 2 (1999 onwards) End Cranks Included 6 Tyne Spacing HC ft tyne bar (no tynes) $300 Suits mm Level 2 (1999 onwards) End Cranks Included 6 Tyne Spacing HC ft tyne bar (no tynes) $300 Suits mm Level 2 (1999 onwards) End Cranks Included 6 Tyne Spacing HC ft tyne bar (no tynes) $425 Suits John Deere End Cranks Included 6 Tyne Spacing HC ft tyne bar (no tynes or end cranks) $220 Suits Honeybee 36ft (fits left or right reel) Level 1 4 1/2 Tyne Spacing HC ft tyne bar (no tynes) $245 Suits Honeybee 36ft (specify left or right reel) Level 2 6 Tyne Spacing Tyne Bars - Suit Honeybee 42 or 45ft with Hart Carter Reels and Mid West Prior , 40, 42, 45 & 50ft are available HC Reel Arm Bearing Half $2.50 Suits most reels since approx 1990 (including all JD Draper above S/No ) HC Reel Arm Bearing Half $8 Suits reel John Deere Draper Front early up to S/No HC Reel Arm Bearing $2.25 C-IH 1010 with wood bats and JD 36ft Draper Front Ends of reel only HC Reel Arm Bearing $2 Cap C-IH 1010 with wood bats HC Reel Arm Bearing Base $2.25 C-IH 1010 with wood bats HC U Bolt $2.50 Suits C-IH 1010 with wood bats HC End Shield Bearing male thread $4 All Level 1 and Level 2 HC End Shield Bearing female thread $3.30 All Level 1 and Level 2 HC Super oilite bearing $12 HC Eccentric control ring $140 Suits all Level 1 and Level 2 6 bar models HC Eccentric control ring 5 bar models $140 HC Ball bearing roller $30 Suits all Level 1 and Level 2 since 1990 HC Ball bearing roller early type $30 HC Eccentric end shield 6 bar $300 Suits all Level 1 and Level 2 HC Eccentric end shield 5 bar $400 HC Reel arm $20 Suits Level 1 and Level 2 HC Reel arm early type $20 HC Reel arm early type $25 HC Bearing strap suits HC bearing half $6 HC Driving end shaft $390 Level 1 8 Barrel (detail model being fitted to) HC Driven end shaft $160 Level 1 8 Barrel (fits all models) HC Driving end shaft $390 Level 2 8 Barrel (detail model being fitted to) HC Driven end shaft $260 Level 2 8 Barrel (fits models since 1999) HC Driving end shaft $460 JD 36ft Draper Platform early up to S/No (AH164074) 10 Barrel HC Driving end shaft $450 JD 36ft Draper Platform current above S/No (AH206803) 10 Barrel HC Driven end shaft $380 JD 36ft Draper Platform early up to S/No (AH164075) 10 Barrel HC Driven end shaft $420 JD 36ft Draper Platform current above S/No (AH206801, AH215184) 10 Barrel HC Socket Head Shoulder Screw and Nut $13 (08) Prices exclude GST 5

8 Improved Hart Carter Concaves Tyne Reel for Parts Axial Flow and Rotaries HC Right hand crank arm for bar $45 Level 1 prior 1999 HC Segment Eccentric end shield $35 (some reels JD and New Holland) HC Left hand crank arm for tyne bar $45 Level 1 prior 1999 HC Wood Bat with Tynes $170 Suits old 1010 Case IH Fronts HC Left hand end bracket $225 (detail model being fitted to) HC Right hand end bracket $225 (detail model being fitted to) Universal Harvester (U2) Reel Parts (Fitted to some Honeybee Draper Fronts) UHC225 Tip Plate $6 UHC256 Regular Control Arm for 42 Diameter Reel $18 (12 13/32 ) UHC235 Ball Bearing $12 UHC265 5 Bat Shield Section for 42 Diameter Reel $26 UHC241B Ball Bearing Holder Assembly $30 UHC266 6 Bat Shield Section for 42 Diameter Reel $24 UHC245 5 Bat control ring including Bearings $240 UHC Control Plate Assembly/Tube Inserts (2) $95 UHC247 6 Bat control ring including Bearings $300 UHC255 Fixed Control Arm for 42 Diameter Reel $17 (13 5/8 ) UHC-290 Control Plate Roller $30 Macdon Reel Parts MD Reel Arm Bearing $4.50 Suits CIH Belt Front 2052, Macdon 973, some 972, Case IH A1 MD48083 Reel Arm Bearing $6 Suits CIH Belt Front 1040, 1042, Macdon 960, 962 MD Reel Arm Bearing $4 Suits D60 Macdon Reel & Case-IH MD End Tyne Bush (goes with MD ) $1.50 Use 3 per bat suits D60 MD End Shield Segment Left Hand Reel $45 Model 2100 Tyne Reel (973) MD End Shield Segment Right Hand Reel $70 Model 2100 Tyne Reel (973) MD End Shield Segment Cam End $44 Model 2100 Tyne Reel (973) MD End Shield Half Left End $210 Model 2100 Tyne Reel below Serial No MD End Shield Half Right End $178 Model 2100 Tyne Reel below Serial No MD End Shield 1/3rd (opp to cam end) $160 Model 2100 Tyne Reel above Serial No MD End Shield Half Cam End $185 Model 2100 Tyne Reel above Seial No MD50185 Bearing End of cam arm $7 Model 2100 Tyne Reel (973) MD50184 Bearing Cam Ring $20 Model 2100 Tyne Reel (973) MD Flange Finger Tube $30 Model 2100 Tyne Reel below Serial No Prices exclude GST (08)

9 Grain Tank Extensions More Time Harvesting... Less Time Emptying Add up to 3 tonne (of wheat) to your capacity Folds Down Easily & Quickly Colour matched to your harvester Complete with wiring harness for bin level sensor and lights on some models Order Model Increased Price No. Application Capacity Case-IH BT24581B Case-IH 2166, Tonne $2700 BT29944 Case-IH 2188, 2388, Tonne $2400 BT24355 Case-IH 2144, Tonne $1400 BT26301 Case-IH 8010, 8120, 9120 (add to original equipment extension) 2.5 Tonne $1500 BT25755 Top Off Auger $1000 BT23984 Hydraulic Kit All Case-IH after 1995 $700 John Deere BT24545 John Deere 9500, 9510, 9550, 9560CWS, CTS, CTSII 2.8 Tonne $2250 BT , 9610, 9650CWS, 9660CWS 3.0 Tonne $2250 BT25583 Auger Cover Panel Use with Big Top $140 and on models prior to 2002 BT STS, 9750STS, 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS 3.0 Tonne $2700 BT25755 Top Off Auger $1000 BT23035 Hydraulic Kit AIl JD 9000 s including STS models $700 New Holland BT24152 TR87, 88, 89, 97, 98, 99 with Genesis Engine 2.5 Tonne $2300 BT26300 CR940, CR9040, CR960, CR Tonne $2000 BT26301 CR970, CR9070 (add to original equipment extension) 2.5 Tonne $1500 Extra capacity is measured in relation to the original grain tank without Hungry Boards WARNING: Use of this product is at the owner s discretion. Increasing grain capacity may adversely affect centre of gravity, stability and controllability. Exceeding maximum combine weight loadings can risk structural integrity and drive line components. Harvestaire Pty Ltd does not assume any liabilities, or make any warranties regarding the performance or structure of the combine. See combine owner s/operator s manual for specific limitations, operating recommendations and safety information. (08) Prices exclude GST 7

10 Redekop Strawchopper and Chaff Spreader The Amazing MAV Strawchopper Spreads Straw and Chaff to 45ft An even spread out to width of cut (max 45ft) is the optimum seed bed preparation to avoid problems with weed control and uneven emergence. How They Work: The development of Redekop s Maximum Air Velocity (MAV) Straw Chopper is a breakthrough in crop residue management. The MAV s revolutionary design uses two zones for cutting and spreading, rather than a traditional rotor design that depends on the cutting blades to also spread the straw. Our straw chopper s cutting zone has 4 rows of long life blades mounted in pairs on the rotor. For optimum cutting performance, a high density counterknife (tight spaced knife bar) is recommended. MAV Straw Chopper Features Straight sharpened reversible blades finely cut straw into uniform sizes. Paddle blades increase chopper air flow, spread width and uniformity in wide body choppers. Fan blades generate maximum air velocities of up to 145 Km/hr. The MAV residue manager finely cuts and uniformly spreads crop residue across the width of the cutterbar. With unmatched cutting and spreading, the MAV is quite possibly the only tool you ll need to prepare your land for seeding. A new rotating knife bank can help to reduce blade damage from rocks and foreign objects passing through the chopper. The MAV residue manager blows dust away from the engine compartment for a cleaner harvesting environment. All MAV rotors use blades in the cutting zone that are mounted in pairs for optimum cutting performance. Spring loaded pins allow rapid adjustment of the tailboard angle for fast, easy spread-adjustment without spanners. Easily switch from spreading to dropping straw for baling. High speed airflow generated in the MAV residue manager is created by shrouded fan blades tucked away outside of the cutting zone. Finely cuts and uniformly spreads crop residue to eliminate the need of seedbed tillage operations. 8 Prices exclude GST (08)

11 wide body choppers. flow, spread width and uniformity in wide body choppers. Fan blades generate maximum air velocities of up to 90 mph. Fan blades generate maximum air velocities of up to 90 mph. Redekop Strawchopper and Chaff Spreader Uniform spreading Uniform spreading from 20 to 45 feet Uniform spreading 45 feet from from 20 to to feet The airflow-generating zone uses Redekop s patented fan blades tucked away outside of the cutting zone. Specially designed shrouds build up The zone uses Redekop s patented fan blades tucked air speed around the six fan blades at either end of theairflow-generating rotor. The MAV generates extra-high away outside of the cutting zone. Specially designed shrouds build up velocity air speeds up 42 ft spread air speed around the six fan blades at either end of the rotor. The MAV 30 ft spread to 90 mph to blow the 20 ftgenerates spread extra-high finely cut straw and velocity air speeds up 42 ft spread chaff uniformly across 30 ft spread the cutterbar width for to 90 mph to blow the 20 ft spread unmatched spreading finely cut straw and performance. The airflow-generating zone uses Redekop s patented fan blades tucked away outside of the cutting zone. Specially designed shrouds build up air speed around the six fan blades at either end of the rotor. The MAV generates extra-high velocity air speeds up to 145 Km/hr to blow the finely cut straw and chaff uniformly across the cutterbar width for unmatched spreading performance. Easy adjustments chaff uniformly across The MAV residue manager allows you to easily the fine-tune cutterbar the width for unmatched spreading The MAV uniformly spreads spread to match changing field conditions. In the field, the easily crop residue up to 45 feet. Easy adjustments adjustable fins and tailboard fine-tune theperformance. spread for uniform residue across theyou width of the cutterbar. Complete The MAV distribution residue manager allows to easily fine-tune the spread to match changingchoppers field conditions. In independent the field, the easily adjustable fins replacement feature left and right rapid and tailboard fine-tune the spread for uniform residue distribution across the width of the cutterbar. Complete replacement choppers design. feature adjustment with Redekop s exclusive split tailboard Easy adjustments independent left and right rapid adjustment with Redekop s exclusive split tailboard design. The MAV uniformly spreads The MAV uniformly crop residue up to 45spreads feet. crop residue up to 45 feet. The MAV residue manager allows you to easily fine-tune the spread to match changing field conditions. In the field, the easily adjustable fins and tailboard fine-tune the spread for uniform residue distribution across the width of the cutterbar. Complete replacement choppers feature The MAV Plus+ Option for Redekop complete choppers provides the extra spread needed whenindependent using 40+ft left headers. All MAV Plus+ rotors runwith larger 50mm bearings on a and right rapid adjustment Redekop s exclusive split tailboard design. MAV Plus+ Option forged end rotor which gives all MAV Plus+ choppers extra durability & longevity. MAV Plus+ rotors are fitted with larger tight tolerance fan blades which increase the air velocity up to 250 Km/hr and the use of specially scooped tailboard fins to spread the straw the extra distance. Upgrade to MAV John Deere Case-IH New Holland Turn your John Deere combine into a crop residue manager. Achieve a finer cut, wider spread and superior performance with a complete MAV residue manager or a MAV rotor upgrade to the factory chopper. Improve the MAV rotor upgrade performance even more with these options: 1. Optimised 12 vane tailboard for the widest spreading capabilities up to 45 feet. 2. Tight knife bar kit (1 inch counterknife spacing) for the finest possible cut. Case-IH Axial Flow combines can be upgraded with the complete MAV residue manager. Both straw and chaff are spread with this chopper. Tight knives are standard for the finest cut. A simple, rugged latch releases the chopper to swing aside for easy access to the combine sieve. The 7010 and 8010 combines are equipped with a fixed-in-place MAV residue manager. The MAV residue manager is available as a complete chopper upgrade and a rotor upgrade for the New Holland CR, CX and TR series combines. Both straw and chaff are spread with the complete chopper upgrade. Tight knives are standard for the finest cut. The split tailboard design rapidly adjusts to changes in harvesting conditions or cutterbar width. Want to bail straw? You can change from chopping to windrowing in seconds with no drive belt adjustments required. A new rotating counterknife system can help reduce blade damage when foreign objects pass through the chopper. (08) Prices exclude GST 9

12 Redekop Strawchopper and Chaff Spreader Order No. Model Application Detail Price Case-IH MAV Chopper Assembly including Drives for Case IH 8010 $12750 that has never had a chopper fitted John Deere MAV STS pre 2006 Chopper Assembly including Drives for John Deere $11750 that has never had a chopper fitted MAV STS, 9750STS, 9660STS Rotor Upgrade for existing John Deere OEM Chopper $ STS (2003 on) - MAV Plus+ Option. Increased fan capacity and special widespread Tailboard Fins to spread out to 45ft New Holland MAV CR970 Chopper Assembly including Drives for New Holland machine $11000 that has never had a chopper fitted MAV CR9070, CR9080 Chopper Assembly including Drives for New Holland machine $11250 that has never had a chopper fitted MAV CR9090 Chopper Assembly including Drives for New Holland machine that has never had a chopper fitted $11750 Spare Parts MAV-BK500 Paddle Blade (Small Wing) Models prior to MAV $180 MAV-BK505 Set of 4 Pair Winged Blades $140 / set MAV-BK505C Set of 4 Pair Long Life Blades Winged, Carbide Coated $200 / set MAV-BK550 MAV Fan (In Ends) $370 MAV-BK554 Paddle, Fan Bushing suit MAV (JD) $20 MAV-BK570 MAV PLUS Fan (In Ends) $500 MAV-BK650 Straight Blade Models suit MAV $120 MAV-BK650C Set of 8 Straight Long Life Blades Carbide Coated $220 / set MAV-BK700 Set of 8 Knives Straight Stationary $100 / set MAV-BK553 Set of 8 Bushings for Chopper $120 / set MAV-BK555 Set of 8 Washers for Chopper $38 / set MAV-2B116K Kevlar Drive Belt - Suit CIH $260 MAV-2B133K Kevlar Drive Belt - Suit CIH $330 MAV-2B146K Kevlar Drive Belt suits New Holland $290 MAV-2B103K Kevlar Drive Belt suits STS John Deere $300 MAV-2B195K Kevlar Drive Belt suits CAT 480 $340 MAV-2B255K Kevlar Drive Belt - Suit CIH 80 & 60 series $ Prices exclude GST (08)

13 Chaff Spreader Avoid those Header Trails Save on Chemical Costs Chaff Spreaders reduce the need for high chemical rates to kill the heavy concentration of weeds and self-sown crop in the header trail. LOWER RATES SAVE YOU $$$ and sometimes saves the need for second and third applications. Increased Yields Reduced weed concentrations mean improved moisture retention and chemical incorporation. Header trails shed moisture, particularly in light falls of rain and interfere with chemical effectiveness. Should you collect or spread your chaff and weed seeds??? We believe it is the ultimate to remove All weed seeds from your paddocks but this is not yet practical for everyone but dropping weed seeds and chaff in a trail unless you are going to burn is the worst thing to do. This gives the chemicals the least chance of working. So we believe you should carefully consider your weed management. Chaff Spreaders are a vital tool in the management of weed populations. At $3750 it will pay for itself many times over. Avoid those Header Trails Spread your Weed Seeds properly at Harvest time so chemicals work at lower rates Twin Spinner model swings away for easy sieve access Cyclone Spinner Spreaders are hydraulically driven Order No. Model Application Price Agco/Allis CCS All N Models $3750 CCS All R Models $3750 Case International CCS , 1644, 1680, (1992 & later), 1688 $3750 CCS , 2166, 2366, 2188, 2388, 2377 $3750 John Deere CCS , 9500, 9510, 9450, 9550, CTS & CTSII $3750 CCS , 9610, 9650 CWS $3750 Massey Ferguson CCS $3750 New Holland CCS TR85, 86, 87, 88, 95, 97, 98 $3750 CCS TX Models $3750 CCS TR99, TR 89 $3750 (08) Prices exclude GST 11

14 Air Reel Full Width Fan Design The revolutionary Air Reel consists of a main aluminium beam with a hydraulically driven fan. This fan feeds the cut crop from the knife to the cross auger or onto the belts if you have a belt front. Nothing mechanical touches the crop forward of the knife. This strong airstream saves most pods usually lost from the shattering action of the knife. What Crops Can I Harvest with Air? Nearly all crops, heavy or light except severely down and tangled crops. Great Visibility Dramatically reduces operator fatigue and improves visibility of the knife. Air won t feed in sticks and stones like a reel. Reduce the damage to your machine. Adjust the fan rev s and angle of the air on the move from the cab. Does Air Perform Well on Belt Fronts? Yes Air will lay crop material back on the belts well but is not recommended for Heavy Swathing applications. Save the cost in only a few hundred acres of legumes or light cereal crops. No more lupin and other legume losses from bat reels or tyne reels. Order No. Description and Model Application Price AR30A Harvestaire Air Reel suits 30 Ft John Deere 230 or 930 Fronts $10,200 AR30B Harvestaire Air Reel suits 30 Ft Case-IH 1010, Macdon, Massey Ferguson, John Deere 630 $10,200 International 810, Agco/Allis AR30C Harvestaire Air Reel suits 30 Ft New Holland 806, 971 Front 71C, 73C (Left Hand Driven) CIH 2010, 2020 $10,200 AR30D Harvestaire Air Reel suits 30 Ft Honey Bee Belt Front (Left Hand Driven) $10,200 AR35A Harvestaire Air Reel suits 35 Ft John Deere 635 Flex Front $10,900 AR36A Harvestaire Air Reel suits 36 Ft John Deere Rigid Front $11,000 AR36B Harvestaire Air Reel suits 36 Ft Case-IH Belt Front, Macdon Belt Front $11,000 AR36C Harvestaire Air Reel suits 36 Ft New Holland Belt Front, Honeybee Belt Front $11,000 AR36D Harvestaire Air Reel suits 36Ft John Deere Draper Front $11,000 AR36E Harvestaire Air Reel suits 36Ft Agco Draper Front $11,000 AR Hose Kit Hose Kit to connect to Air Reel to existing lines on the comb 30ft and less No Charge with Air Reel AR Hose 36 Hose Kit to suits 36ft Front (specify make and model) $400 Full Spare Parts Range Available Brackets To suit Hydraulic For And Aft Available On Request Full range of spare parts available 12 Prices exclude GST (08)

15 Auger Extensions Is your Unloading Auger too short? Standard Basic Setup The Extender is a simple add-on kit for Case-IH, Claas Lexion, Gleaner, John Deere, Massey Ferguson and New Holland Headers. Use the Extender for safe, fast unloading into chaser bins, field bins, trucks and semi trailers. Most kits are simple to fit with minimal tools required. All units are painted to match your Header s factory colour. CASE-IH CASE-NH JD NH Order No. Model Application Item Price Case-Ih Axial Flow EXT-CIH-FT3 1644, 1666, 1688, 2166, 2366, 2188, 2388, 2588 Auger Extension including Spout $1250 EXT-CNH-FT3R 7010, 8010 Prior 2007, 7120, 8120, 9120, 7088 Auger Extension including Spout 36 Extension (Red) $1875 EXT-CNH-FT070R 7010, 8010, (2007 & 2008 Models Only) Auger Extension including Spout (Red) $1370 EXT-CIHSPOUT Spout Only suits EXT-CIH-FT3 $220 EXT-CNH-FSSP Spout Only suits EXT-CNH-FT3 $400 John Deere EXT-JD-FT3 9650STS, 9750STS, 12¾ diameter Auger Auger Extension including Spout $ to 9610 inclusive CTS, CTSII EJ STS, 9660STS, 9760STS, 14 diameter Auger Auger Extension 36 Extension $ STS, 9770STS EJ sts, 9760sts, 9670sts 17 diameter Auger Auger Extention 36 Extension $ sts, 9870sts, S670 hur Auger EJ STS, 9760STS, 9670STS, 9770STS, Auger Extention 48 Extension $ STS, S670, S680 HUR Auger EXT-JDSPOUT Suits EXT-JD-FT3 12¾ diameter Auger Spout Only $270 New Holland EXT-NHT-FT2 TR88, TR89, TR98, TR99, TX66, TX68 Auger Extension including Spout $1850 EXT-CNH-FT3 CR940, CR960, CR970, CR9060, CR9070 Prior 2007 Auger Extension including Spout 36 long (Black) $1350 CR9080, CR9090, CX840, CX860, CX880 EXT-CNH-FT070B CR940, CR960, CR , 2008 Models Only Auger Extension including Spout (Black) $1875 EXT-CNH-FSSP Spout Only suits EXT-CNH-FT3 $400 Massey Ferguson EXT-AGCOMF-FT to 8780, 9690, 9790 Auger Extension including Spout 36 Extension $1950 EXT-EMGL4215-R 9895 Auger Extension including Spout 36 Extension (Red) $3100 Agco/Allis EXT-GL-FT212 Gleaner N+R Series 11 Diameter Auger Auger Extension 24 Extension $1700 EXT-GL-FT214 Gleaner N+R Series 14 Diameter Auger Auger Extension 24 Extension $1400 EXT-EMGL4215-S Gleaner A85 15 Diameter Auger Auger Extension 36 Extension $3100 (08) Prices exclude GST 13

16 John Deere Knife Guards Draper Fronts Knife Guards for John Deere Draper Fronts HC Knife Guard $25 with 2 Long prongs, 1 short prong Suits 900 Draper Fronts Original Part: H HC Knife Guard $25 with 1 Long prong, 2 short prongs Suits 900 Draper Fronts Original Part: H HC Knife Guard $25 with 2 Long prongs, 1 short prong Suits 600 Draper Fronts Original Part: H HC Knife Guard $25 with 1 Long prong, 2 short prongs Suits 600 Draper Fronts Original Part: H All these Guards can be fitted with plastic Extension Fingers All Guards Cast Steel with induction hardened Cutting Edges Full Prong version for lighter crops Grain Moisture Meter Wile 65 For whole grains and seeds. The Wile 65 measures the moisture of grain and seeds rapidly and precisely and is easy to use due to its menu driven display. The meter can also be used for temperature measurements of different substances with the help of the optional W-651 temperature probe. Quick and easy to use. Wile 65 is pre-programmed with 16 Australian grains & seeds. Automatic temperature compensation Stores test results and displays average reading Wile 78 The Wile 78 is the top of the range model that crushes grains for ultimate accuracy. Wile 78 is pre-programmed with 21 Australian grains & seeds. Results in less than 20 seconds Interactive LCD display in user s own language Automatic temperature compensation Wide moisture range 3% - 40%, dependent on the grain Specially coated teeth for longer life Ergonomically designed cap Order No. Description Price WILE65 Wile 65 Moisture Meter $695 WILE78 Wile 78 Moisture Meter $ Prices exclude GST (08)

17 No Choke 4 in 1 Knife Guards Innovative Knife Guards and Cutting Systems reduce crop losses. Reduce shatter loss without choking High quality forging. The Rolls Royce of Double Density KNIFE GUARDS. Reduces sideways travel of crop over 50% for less shatter and less wasted grain. NO CHOKE Knife Section projects past the short prong to cut through thick or tangled crops. Every second prong is short which gives you all the advantages of extra cutting edges without choking. To Reduce Harvest Losses, we recommend... NO CHOKE 4 in 1 Knife Guards For Medium to Heavy legumes eg. Lupins, Faba Beans, Chick Peas and all Wheat, Barley, Oats and Canola. Double Heat Treated The whole guard is heat treated and case hardened to make it tough, then the cutting edges are heat treated separately to a very high hardness for long life. Can be used with or without Harvestaire Plastic Extension Fingers Order No. Model Application Marks on Guard Price Each NC4IN1AC Agco/Allis, Rigid and Belt Fronts 7222 $42 NC4IN1JD John Deere 200 & 900 Series Fronts, New Holland 806 Front 7222 $35 NC4IN1CI Case-IH, Macdon, Honeybee, New Holland & Mid West Belt Fronts 7228 $30 Case-IH 1010, 2010, 2020 Rigid and Flexible Cutter Fronts New Holland 971, 71C, 73C NC4IN1ENDGD Guard suits Knife Drive End Case-IH 1010 Fronts, Case-IH & Macdon Belt Fronts (3 required per Knife $45 Drive End). Suits NH971, 71C, 73C, Case-IH 2010, 2020 (2 required per front) NCCTRHB Centre Guard suits Honeybee, Macdon and Mid West Double Knife Drive (3 required per front) $55 NC4IN1CTR New Holland 971, 71C, 73C, Case-IH 2010, 2020 (1 per Front) $90 SHIMS 1mm suits New Holland 971, 71C, 73C, Case-IH 2010, 2020 Front (2 per guard) No Charge NC4IN1IH International 810 Fronts 7226 $38 (08) Prices exclude GST 15

18 2 Finger Knife Guards KG31 KG32 KG33 KG42 KG44 KG208 KG209 KG210 KG1588 KG10616 KG10637 KG10701 KG10712 KG10717 Order No. Original Model Application Marks Price Part No. On Guard KG Agco/Allis BC225 $ KG R1 International 810 Front TPQ265 $22 KG33 - John Deere 200 & 900 series fronts, Prairie Mac Swather, Massey Ferguson, BC240 $18 New Holland 705, 806 Fronts (Replace ) Agware Swather KG New Holland Haybines & 971 Fronts, Case-IH 1010 Fronts & Swathers BU215A $ C1 & Mower Conditioners, Macdon Windrowers, Hesston Hay & Westward late model or 215 KG42C Guard for Centre of Double Drive NH and CIH Mower Conditioner $28 KG Macdon Draper Fronts, Case-IH Draper Fronts $19 KG Claas (OEM , ) $20 KG Versatile Swather BU290 $20 KG M1 Praire Mac & MF Swather, Westward early model 235RS $22 KG Macdon Swather or Belt Front (Stubby cutting edge) BU250 $16 KG SCH Knife Guard Honeybee 2 Prong - $26 KG SCH Knife Guard 2 Prong suits centre where Double Knife Drives overlap - $52 KG SCH Knife Guard 2 Prong Open Top suits Knife Drive End - $45 KG SCH Knife Guard 3 Prong Head End - $85 KG SCH Knife Guard Honeybee 3 Prong - $50 SHIM-1 - Knife Guard Shim 1mm thick $1.30 SHIM-2 - Knife Guard Shim 2mm thick $1.40 SHIM-3 - Knife Guard Shim 3mm thick $1.50 PSFS10X8 - Wear Strip Suit Primary Sales Knife Guards $ Prices exclude GST (08)

19 Legume Harvesting Plastic Extension Fingers Manufactured from extremely tough, flexible and hard-wearing Polypropylene. Steel insert Positive and secure attachment to your existing knife guards with an existing bolt. Wide tray shape to save pods and heads. 50mm (2 ) wide and 230mm (9 ) long. Ultra-violet stabilised material for long life. Fits original 2 Finger guards or Harvestaire No Choke Guards Save heads in those light thin crops Order No. Model Application Price EXA John Deere 200, 900 Fronts, New Holland 705, 806 Fronts. All Massey Ferguson. 4 per foot required $6 ea All Agco/Allis and 4 in 1 No Choke Harvestaire Guards that fit these fronts EXB International 810 Fronts, KG33 Knife Guards and 4 per foot required $6 ea 4 in 1 No Choke Harvestaire Guards that fit International 810 EXC JD Draper Fronts 3 per foot required $6 ea and Claas Knife Guard S19.600, S per foot required $6 ea EXCJD Clip suits plastic extensions EXC on JD Draper 72 per 36 foot required $1 ea EXCBN 3 / 4 x 3 / 8 cuphead bolt and nut suits clip on JD Draper 72 per 36 foot required $1 ea EXE New Holland 971, 71C, 73C Fronts, Case-IH 1010, 2010 & 2020 Fronts, Macdon Belt Fronts 4 per foot required $6 ea to and including 972 (case-ih 1052) EXF Honeybee with Crary or Harvestaire No Choke Guards and Agco Belt Fronts 4 per foot required $6 ea EXG Agco Knife Guard (2007 onwards) 4 per foot required $6 ea (08) Prices exclude GST 17

20 Pick Up Belting And Plastic Teeth All belting we supply is the same quality WCCO supply to header manufacturers. WCCO supply 90% of all original equipment belting. WCCO belting is made using only the best materials available and uses the latest manufacturing techniques, resulting from years of research. All belting has been UV stabilised for long life. Edges and centre are reinforced with a double strip. Highest Quality Available from USA The Industry Leaders and suppliers to original equipment Order No. Model Application and Details Price Case-IH PBCIHBO Belt suits 1015, 403, 503, 21 3 / 4 wide 60 1 / 8 long (No Teeth Fitted) $150 PBSMFB Front belt suits 2015 model, 18¾ wide 57¾ long (No Teeth Fitted) $110 PBSMRB Rear belt suits 2015 model, 18¾ wide 57¾ long $100 John Deere PBJDBO Belt suits 110, 132, 212, 214, 912, 914, 3 Roller Models 22 wide 66 1 / 2 long (No Teeth Fitted) $150 PBJDBO5 Belt with holes wide x long suits JD615P $230 Phillips Swathmaster PBSMFB Front belt suits late model with 1 / 4 cleats / 4 wide 57 3 / 4 long (No Teeth Fitted) $110 PBSMRB Rear belt suits late model with 1 / 4 cleats / 4 wide 57 3 / 4 long $100 Victory PBVICFB1 Front Belt 17 1 / 2 wide x 44 1 / 4 long replaces Part No (No Teeth Fitted) $110 PBVICRB1 Rear Belt 17 1 / 2 wide x 44 1 / 4 long replaces Part No $105 PBVICFB2 Front Belt 17 1 / 2 wide x 53 1 / 2 long replaces Part No (No Teeth Fitted) $110 PBVICRB2 Rear Belt Plain Belt 17 1 / 2 wide x 53 1 / 2 long replaces Part No $140 Teeth PBTEETH-SP Single Prong Teeth Victory $1 PBTEETH-DP Double Prong Teeth suits Case-IH, John Deere, Smales, Swath Master, Allis $1.80 PBBN Bolt and Nut suits single and double prong teeth $0.50 PBJB Bolt and Nut to join ends of Pick Up Belts, single prong teeth $1.75 NEW 18 Prices exclude GST (08)

21 Draper Front Belting Order No. Model Application and Details Price Agco Side Belting (Sold per foot) SBAG41 All Agco Draper Fronts 41 wide - no V guide $25 per ft Connector (Sold as a Kit) BCAG41 Suits 41 side belting Includes Bolts and Nuts $40 Centre Feed Belt (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBAG60 Agco Draper Fronts 60 wide - no V guide $515 FBAG51 Agco Draper Fronts wide by 63 long no V guide $450 Claas NEW SBCL395 Maxflo 1050 (35ft), 1200 (40ft) - Side Belting 1020mm wide with V guide $26 Honeybee also sold as New Holland Side Belting (Sold per foot) SBHB42 All Honeybee - New Holland to approx wide - no V guide $25 per ft SBHB4175 Honeybee - New Holland 2009 on wide - with V guide $28 per ft NEW Connector (Sold as a Kit) BCHB42 Suits 41 3 /4 and 42 side Belting Includes Bolts and Nuts $50 BCHB69 Suits 69 Centre Belt Includes Bolts and Nuts $85 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBHB34 Honeybee - New Holland - Some early (2 required per machine) 34 wide - no V guide $200ea FBHB68 Honeybee - New Holland 2009 on wide by 63 long - with V guide $650 FBHB69 Honeybee - New Holland to approx wide by 65 long - no V guide $400 FBHB4175 Honeybee - New Holland 2009 on (2 required per machine) wide - with V guide $350 John Deere Side Belting (Sold per foot) SBJD36 930D, 936D Draper Fronts 36 wide - with V guide $25 per ft SBJD D, 635D, 640D Draper Fronts 39.5 wide - with V guide $28 per ft Connector (Sold as a Kit) BCJD36 Suits 36 wide belting Includes Bolts and Nuts $50 BCJD395 Suits 39 1 /2 wide belting Includes Bolts and Nuts $50 BCJD55 Suits 55.3 wide centre belt Includes Bolts and Nuts $60 BCJD60 Suits 60 wide centre Belt Includes Bolts and Nuts $65 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBJD60 930D, 936D Draper Fronts 60 wide by 63 1 /2 long - with V guide $425 FBJD D, 635D, 640D Draper Fronts 55.3 wide by 58 long - with V guide $380 Midwest Side Belting (Sold per foot) SBMW36 All Midwest Draper Fronts 36 wide - with centre V guide $26 per ft Connectors (Sold as a Kit) BCJD36 All 36 wide belting Includes Bolts and Nuts $50 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBMW44 Suit Midwest with narrow body centre design 44 wide with V guide $320 FBMW60 Suit Midwest with wide body centre design 60 wide with V guide $350 Case/New Holland Centre Feed Belt FBCNH42 Suits NH800 Series CIH31 Series 42 wide $620 Full Roll Discount Available (08) Prices exclude GST 19 NEW

22 Draper Front Belting Order No. Model Application and Details Price Macdon also sold as Case IH and New Holland Side Belting (Sold per foot) SBMD416 All Macdon prior D60 and Case IH prior to 2152, wide - with V guide $27 per ft SBMD416DG D60, D65, FD75 Macdon series 2152, 2162 Case IH, 83C New Holland 41.6 wide - with double V guide $48 per ft SBMD415 Early Case IH swather, Agware swather 41.5 wide - no V guide $26 per ft SBHB42 Case IH swathers 8120 on, some Hesston and Versatile 42 wide - no V guide $25 per ft Connector (Sold as a Kit) BCMD416 Suits 41 1 /2, 41.6 side belting Includes Bolts and Nuts $50 BCHB42 Suits 42 side belting Includes Bolts and Nuts $50 Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBMD374 Macdon, Case IH 37.4 wide by 85 3 /4 long - with V guide $345 FBMD384 Macdon, Case IH 38.4 wide by 97 long - with V guide $425 FBMD415 Macdon, Case IH 41.5 wide by 85 3 /4 long - with V guide $475 FBMD454 Macdon, Case IH 45.4 wide by 97 long - with V guide $400 FBMD549 Macdon, Case IH 54.9 wide by 85 3 /4 long - with V guide $480 FBMD559 Macdon, Case IH 55.9 wide by 97 long - with V guide $420 FBMD595 Macdon, Case IH 59.5 wide by 85 3 /4 long - with V guide $600 FBMDDG Macdon, Case IH, 83C New Holland 78.5 wide by 63 3 /4 long - with double V guide $800 Feed Belt Rollers, Bearings & Hydraulic Motors Macdon MDDR-3962 Side Belt Driving Roller Macdon & Case-IH Belt Fronts 960, 962, 1040, 1042, (No Bearings). $430 Original Part: MDIR-3320 Side Belt Idler Roller Macdon & Case-IH Belt Fronts 960, 962, 1040, 1042, 2042 $495 includes Roller Part and Shaft Part MDDR-3837 Side Belt Driving Roller Macdon & Case-IH Belt Fronts 972, 973, 1052, Original Part: $430 MDIR-0081 Side Belt Idler Roller Macdon & Case-IH Belt Fronts 972, 973, 1052, 2052 $400 includes Roller Part and Shaft Part MDDR-2205 Drive Roller to suit Case IH 8820 $435 MDDR-2042 Idler Roller to suit Case IH 8820 $350 MDDR-3965 Roller to suit Macdon 3000 $485 MDDR-4696 Side Belt Driving Roller Macdon & Case-IH & New Holland D60, 2152, 83C. Original Part: $430 MDIR-4714 Side Belt Idler Roller Macdon & Case-IH & New Holland D60, 2152, 83C. Original Part: $270 MDHM05 Hydraulic Motor suits Macdon & Case-IH Belt Fronts $600 MDLAG Lagging Kit for one Roller $100 Honeybee hbdr05 Side Belt Driving Roller Honeybee & New Holland (including Bearing) suits 42 Belting $455 hbdr10 Side Belt Idler Roller Honeybee & New Holland (including 2 Bearings) suits 42 Belting $425 HBHB Hexagonal Bearing suits Roller $39 HBHM40 OMP40 Hydraulic Motor suits Honeybee & New Holland Belt Fronts $630 HBHM50 OMP50 Hydraulic Motor suits Honeybee & New Holland Belt Fronts $645 John Deere Improved Heavier Wall Lasts Longer JDHB Hexagonal Bearing - Suit Draper Front Rollers $60 20 Prices exclude GST (08)

23 Knife Guard Lifter Kits For Legume Harvesting Lift the knife to the level of the belt. We strongly recommend that if you are using a Belt Front for harvesting legumes (lupins, beans, peas) that a Lifter Kit be fitted to raise the Knife level with the belt so that a lot of pods do not fall off the Knife because of the step-up that is along the front. We have kits to suit Macdon 960, 962, 972, 973 and D60, also sold as Case-IH 1040, 1042, 1052, 2052 and 2152 and Honeybee and New Holland. All kits include spacer bars, bolts, nuts and adaptors to raise the knife drive. EXISTING Standard Belt Front Knife Guard Mount Modified belt Front Belt Front Example Spacer Step Belt Belt Knife now level with belt Order No. Model Application Price KGLM353 Knife Lifter Kit suits Macdon 35ft Belt Front D60 (C-IH2152) $2150 KGLM36 Knife Lifter Kit suits Macdon 36ft Belt Front 960 (C-IH1040) $1600 KGLM361 Knife Lifter Kit suits Macdon 36ft Belt Front 962 (C-IH1042) $1850 Model 962 s will also need an original Macdon 960 Knifehead see below KGLM362 Knife Lifter Kit suits Macdon 36ft Belt Front 972 (C-IH1052) $1900 KGLM363 Knife Lifter Kit suits Macdon 36ft Belt Front 973 (C-IH2052) $2200 KGLM39 Knife Lifter Kit suits Macdon 39ft Belt Front 973 (C-IH2052) $2350 KGLM40D Knife Lifter Kit suits Macdon 40ft Double Drive D60 (C-IH2152), New Holland 83C $2800 KGLM45D Knife Lifter Kit suits Macdon 45ft Double Drive D60 (C-IH2152), New Holland 83C $3050 KGH30 Knife Lifter Kit suits Honeybee 30ft Belt Front $1350 KGH36 Knife Lifter Kit suits Honeybee 36ft Belt Front $1550 KGH42D Knife Lifter Kit suits Honeybee 42ft Belt Front Double Drive $1900 KGH45D Knife Lifter Kit suits Honeybee 45ft Belt Front Double Drive $2000 Spare Parts KDAMAC Knife Drive Arm suits 960 Lift Kit Macdon (C-IH 1040) $490 KDAMAC2 Knife Drive Arm suits 962, 973 Lift Kit Macdon (C-IH 1042, 2052) $490 KDAMAC3 Knife Drive Arm suits 972 Lift Kit Macdon (C-IH 1052) $550 LKHMAC Macdon Part No Knifehead suits 960/962 $260 LKHMAC1 Macdon Part No Knifehead suits 972 $260 LKHMAC5 Macdon D60 (2152) Knifehead (Specify left or right) 5 Tilt $260 LKHMAC10 Macdon 973 (2052) Knifehead (specify left or right) 10 Tilt $260 Blower Front Kits For Legumes and Light Cereal Crops Thousands sold and proven over 30 years across Australia and around the world. Spare Part support still available. (08) Prices exclude GST 21

24 Improved Concaves for Axial Flow and Rotaries Helical Bar Concaves NH TR s C-IH 8010 C-IH 66 & 88 JD STS Slower Rotor Speeds Wider Concave Openings Improved threshing Reduced rotor losses Fuel savings Work longer each day Start earlier Finish later The Helical placement of the bars in these concaves is used so the material approaches the bars at right angles this gives a greater threshing action. The improved threshing action gives you more harvesting hours in the day in those tough crops. The tougher the crop the more these concaves shine! Case-IH Axial Rotor Machines show excellent improvement in threshing capability when fitted with these concaves If you have a specialty rotor, use them with Gorden Rotor Bars for the ultimate performance improvement. Use one or two segments in JD and Case-IH (except 8010 needs a set one left and one right). Order No. Item Model Application Price Case-Ih HBCIHC40 Helical Bar Concave Segment with wires 1640, 1644, 1460, 1660, 1666, 2166, 2366 $1200 (wraps to include extension) HBCIHC80 Helical Bar Concave Segment with wires 1680, 1688, 2188, 2377, 2388, 2588 $1300 (wraps to include extension) HBCIH8010 Helical Bar Concave Set with wires 8010, 8120, 8230, 9120, 9230, 7010, 7120, 7230 $1800 (1 left, 1 right) per set of two John Deere HBJDSTS Helical Bar Concave Segment with wires 9650STS, 9750STS, 9660STS, 9760STS, 9860STS $1400 S660, S670, S680 CJDSTSLK Latch Kit 60 Type Set of 3 When fitting to 9650 or 9750STS $75 per set of three Australian Patent Applies. 22 Prices exclude GST (08)

25 Conventional Concaves Heavier than the originals Harvestaire have been building and supplying Top Quality, Heavy Duty Concaves for over 20 years. We only use top quality steels and all our concaves are fully machined (Line-bored) with great accuracy to enable the best possible set up of your harvester. Fully Machined Concaves that make a real difference to your threshing. In all crops the concave has 2 jobs to do. (1) Thresh or free the seeds from the husk or pod and (2) Separate those seeds from all other crop material. Because the concave has 2 entirely different jobs to do Harvestaire Concaves have 2 distinctly different areas. An area designed for threshing and an area designed for separating. At the front, the threshing area is covered with filler plates. The filler plates allow a bed of material to build up and cushion the incoming crop. This reduces seed damage and also improves threshing. There is less seed damage because your crop is threshed by the crop rubbing against the cushioned bed of material rather than the hard steel in the concave. The bed of material also holds the heads long enough to be completely threshed and not pushed through the concave and onto the shoe in the form of whiteheads or unthreshed pods. You ll notice a big difference in threshing performance, especially in the harder to thresh crops. Because some crops are more difficult to thresh than others the filler plates are removable. You can remove plates for crops such as canola or lupins. Drum Bar Adjustment It is vital to shim your drum bars to match the concave so you achieve the correct thresh. We supply shims for this which enables you to pack drumbars to a uniform clearance off the concave. All bars must have the same clearance as each other and also have the same clearance along their length. Crocked grain and unthreshed heads can occur at the same time if this is not done. A higher rate of wear occurs along the centre of the bar so even if the bars are not worn out they will require re shimming to reset clearances during their life. Separation area Threshing area with filler plates for aggressive threshing (08) Prices exclude GST 23

26 Axial Flow and Rotary Concaves Fully Machined Concaves that make a real difference to your threshing. Most harvesters now use a Rotary or Axial Flow threshing cylinder design. This has increased tonnes per hour dramatically in recent years. But clearances are critical whenever threshing gets hard and concaves have to be closed up. So we strongly recommend rotor bars are shimmed to a uniform clearance off the concaves so you are ready for tough threshing conditions. A properly tuned harvester will thresh and separate to a high standard. Because clearances of rotor bars from concaves are commonly greater than more conventional concaves they are often regarded as not so critical. 24 Heavy Duty Harvestaire concaves are heavier than originals. This reduces stretch and bowing (or opening up) of concaves which means some areas of the concaves are further away from the rotor bars than others. Prices exclude GST (08)

27 Concaves Order No. Model Application Description & Comments Price Agco/Allis CGL-R6272 R62, R72 Concave only Heavy Duty $1525 CGLG-R6272 R62, R72 Grate only Heavy Duty $1750 Case International CIHC , 1620 Set of 3 Concaves No Extensions Heavy Duty $1750 a set CIHC , 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2366 Set of 3 Concaves No Extensions Heavy Duty $2200 a set CIHC , 1680, 1688, 2188, some 2388 Set of 3 Concaves No Extensions Heavy Duty $2250 a set CIHC F 1480, 1680, 1688, 2188, some 2388 Front Concave segment with lip Heavy Duty $850 ea CIHC MR 1480, 1680, 1688, 2188, some 2388 Middle/Rear Concave segment with lip Heavy Duty $800 ea CIHC , 1660, 1644, 1666, 2144, 2166, 2366 Set of 3 Concaves Incorporating Extensions Heavy Duty $2100 a set CIHC F 1640, 1660, 1644, 1666, 2144, 2166, 2344, 2366 Front Concave segment with lip Heavy Duty $750 ea CIHC MR 1640, 1660, 1644, 1666, 2144, 2166, 2344, 2366 Front Concave segment with lip Heavy Duty $675 ea CIHC , 1688, 2188, 2377, 2388, 2588, 7088 Set of 3 Concaves Incorporating Extensions Heavy Duty $2450 a set CIHC F 1680, 1688, 2188, 2377, 2388, 2588, 7088 Front Concave segment with lip Heavy Duty $900 ea CIHC MR 1680, 1688, 2188, 2377, 2388, 2588, 7088 Middle/Rear Concave segment Heavy Duty $800 ea NB. Concave includes extension piece therefore stronger & less expensive applicable to CIHC and CIHC CIHC-8010LH 8010, 7010, 7120, 8120, 9120, 7230, 8230, 9230 Left Hand Concave $600 CIHC-8010RH 8010, 7010, 7120, 8120, 9120, 7230, 8230, 9230 Right Hand Concave $600 CIHC , 711, 725, 726 Concave Heavy Duty $800 Caterpillar CCAT480 Lexion 480, 580 Heavy duty wire and bar type $2700 John Deere CJD & 7720 Titan 2 14 cross bars Wrap Around Heavy Duty $1200 CJD & 8820 Titan 2 14 cross bars Wrap Around Heavy Duty $1600 CJD , 9500, CTS, CTSII Wrap Around (modified design) Heavy Duty $1750 CJD , 9610 Wrap Around (modified design) Heavy Duty $1850 CJD-STS STS, 9660STS, 9750STS, 9760STS, 9860STS Set of 3 Concaves Standard Wire Spacing Heavy Duty $ STS, 9770STS, 9870STS, S660, S670, S680 CJDSTS-9660F 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Front Concave Segment Standard Wire Spacing Heavy Duty $ STS, 9770STS, 9870STS, S660, S670, S680 (replaces AH205254) CJDSTS-9660-MR 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Middle Rear Concave Segment Standard Wire Spacing $ STS, 9770STS, 9870STS, S660, S670, S680 (replaces AH205255) CJDSTSLK Latch Kit 60 Type Set of 3 When fitting CJDSTS9660 to 50 Series STS $75 set of 3 All Concaves are fitted with Wires (08) Prices exclude GST 25

28 Concaves Order No. Model Application Description & Comments Price New Holland Conventional Headers CNH , cross bars Heavy Duty $1750 CNH cross bars Heavy Duty $2000 CNH-860 CX820, CX840, CX860, CX880 Heavy Duty $1980 New Holland Twin Rotor Machines CNH96-11 TR86 above S/No Concaves, replace LH $3000 TR96 above S/No TR87, 88, 89, 97, 98, 99 and RH CNH-960 CR920, CR940, CR960, CR9040, CR9060 Concave OEM Fits left or right (Not inc Extension) $1400 ea CNH-960-Ext CR920, CR940, CR960, CR9040, CR9060 Concave Extension replaces OEM (Fits left or right) $700 ea CNH-970 CR970, CR980, CR9070, CR9080, CR9090 Concave OEM Fits left or right $1450 ea (Not inc Extension) CNH-970-Ext CR970, CR980, CR9070, CR9080, CR9090 Concave Extension replaces OEM (Fits left or right) $750 ea CNHE-97L TR89, 96, 97, 98, 99 Extension grates, left hand (Set of 2) $1650 Replaces , CNHE-97R TR89, 96, 97, 98, 99 Extension grates, right hand (Set of 2) $1650 Replaces , All Concaves are fitted with Wires All Are Fitted With Wires per set of 2 per set of 2 per set of 2 Concave Wire Wire mm Diameter Per Metre $1.70 Wire mm Diameter Sold by the metre and supplied in a coil, just cut to length Per Metre $1.80 Wire mm Diameter and fit High Tensile Spring Wire Wear Resistant. Per Metre $1.90 Wire mm Diameter Per Metre $2.10 Wire mm Diameter Per Metre $ Prices exclude GST (08)

29 Rotor Bars & Drumbars Are your Rotor Bars and Drumbars worn? Worn bars cost you money in extra fuel, time and poor threshing. If the leading edge or centre section are worn more than 3 mm ( 1 /8 ) then they need replacement. We have a Higher and Closer Tooth Profile for better threshing and longer life on our long conventional sets. All sets are matched for weight for a balanced Rotor/Drum and come with Free Shims so you can set a uniform clearance from the concave. In two different grades: Standard Hard equivalent to original equipment in most cases. Chrome Chrome is the ultimate in long life and we have chrome or chrome alloy available in most bars. (08) Prices exclude GST 27

30 Rotor Bars & Drumbars Model Application No. of Bar Type & Particulars Standard Standard Bars Hard Chrome Hard Chrome Price Price Price Agco/Allis OGL-N-1 OGLN1C N & R Series P1 Processor 8L Threshing cylinder, angle long bars $920 $1330 OGL-N-2 OGLN2C N & R Series P1 Processor 6L & 2R Separator cylinder, angle short bars $600 $900 - OGL-4050CL R Series with P3 Processor As reqd Chrome Forward 1 / 2 Tooth Spacing $140 ea - OGL-4050CR R Series with P3 Processor As reqd Chrome Reverse 1 / 2 Tooth Spacing $140 ea - OGL-4050WCL R Series with P3 Processor Chrome Forward 3 / 4 Tooth Spacing $140 ea - OGL-4050WCR R Series with P3 Processor Chrome Reverse 3 / 4 Tooth Spacing $140 ea Case International OIHC , 1620 Axial Flow 16 8 helical, 8 flat bars suits standard rotor $600 OIHC-1440 OIHC1440C 1440, 1460, 1640, 1660, helical, 9 flat bars suits standard rotor $600 $ , 2144, 2166, 2344, 2366 OIHC-1480 OIHC1480C 1480, 1680, 1688, 2188, 2377, helical, 12 flat bars suits standard rotor $900 $ , 2577, OIHC-NS-2CA 1666, 2166, Rotor bar chrome alloy $28 ea 1688, 2188, 2377, 2388, 2588, 66 or 74 suits specialty rotor 7088, 7010, 7120, 8010, 8120, 8230, 9120, 9230 OIHCWS1 1666, 2166, 2366, 1688, 2188, Rotor Bar chrome alloy suits specialty rotor $ , 2388, 2577, 2588, 7088 with spike 7010, 7120, 8010, 8120, , 9230 SPRIHC-S 20 s 2 Straight separator bar $85 ea 40 s, 60 s, 44 s, 66 s 3 80 s, 88 s 8 SPRIHC , 2344, 2366 Helical kicker plate Rear $115 ea (Speciality Rotors only) SPRIHC , 2188, 2388 & Helical kicker plate Rear $110 ea 2577, 2588, 7010, 8010 (Speciality Rotors only) STRIHC-S 20 s 4 42 smooth bar $45 ea 40 s, 60 s, 44 s, 66 s 3 80 s, 88 s 4 STRIHC-T 20 s 4 42 toothed bar $90 ea 40 s, 60 s, 44 s, 66 s 3 80 s, 88 s 4 OIHC , 8-5, 8-6, 710, 725, 726 4L & 4R Flat bars (lead-in plate required) $575 LP58 710, 711, 725, Lead-in plates (set of 8) $95 per set Claas OFD114 - Mega 203, 204, 114 3L & 3R Angle Bars $595 DRBSC Drum bar shim 0.5mm Claas only 45c ea Caterpillar OCAT , 480, 480R 4L & 4R Angle Bars Bolt on $925 OCAT480W - 480, 480R 4L & 4R Angle Bars Bolt & Weld on $925 Drum Bar Shims DRBS All Makes & Models Drum Bar Shim 0.5mm (20 Thou of an inch) 35c ea DRBS2 Drum Bar Shim 2mm 45c ea All sets include Bolts, Nuts, Washers & Shims in the price. 28 Prices exclude GST (08)

31 Rotor Bars & Drumbars Model Application No. of Bar Type & Particulars Standard Standard Bars Hard Chrome Hard Chrome Price Price John Deere OJD-7700 OJD-7700C 7700, 7720, 7720 Titan 2 4L & 4R Angle bars $695 $1000 OJD-8820 OJD-8820C 8820, 8820 Titan 2 4L & 4R Angle bars $750 $1250 OJD-9500 OJD-9500C 9400, 9410, 9500, L & 5R Angle bars $850 $1000 CTS, CTSII, 9650CTS OJD-9600 OJD-9600C 9600, 9610, 9650CWS, 9660CWS 5L & 5R Angle bars $850 $1100 John Deere sts and cts, sts Threshing Elements OJD-E-STS50H 9650STS, 9750STS, 9660STS, Set of 3 Hardened $ STS, 9670STS, 9770STS, 9870STS Threshing Elements (5 sets per machine) OJD-TS-CTSH CTS, CTSII, 9650CTS, 9660CTS Tyne Short Hardened separator $22 OJD-TL-CTSH CTS, CTSII, 9650CTS, 9660CTS Tyne Long Hardened separator $24 OJD-T-STS5OH 9650STS, 9750STS, 9660STS, Set of 3 Hardened Tynes $ STS, 9670STS, 9770STS, 9870STS or separator (8 sets per machine) Massey Ferguson OMF , 587, P.T.O. & S.P. 4L & 4R Flat bar (lead-in plate req) $430 LP , Lead-in plates (Set of 8) $85 per set OMF , 850 Hi Inertia 4L & 4R Angle bar $685 - OMF , 860 Hi Inertia 4L & 4R Angle 5-hole bar $760 - OCMF , 587, S.P. & P.T.O. 2L & 2R Concave bars (set of 4) $235 OMFRT , 760, 850, 860, 542, Rethresher bars $150 per set OMFCH , 760, 850, 860, 542, Rethresher channels $65 per set New Holland ONH , 8070, TX34, TX64 4L & 4R Angle bar $695 ONHCX CX820, 840, 860, 880, CX8080 5L & 5R Angle bar $1100 ONH-70 - TR70, TR85 to Serial No L & 2R chrome angle, 2L & TR95 up to Serial No R angle bars, 4L & 4R flat bars $830 - ONH-95C Early TR86, TR96, late TR L & 12R flat bars all chromed $1450 ONH-96H ONH-96C TR86 above Serial No $2200 $2600 TR96 above Serial No Flat & 12 Angle TR87, TR88, TR89, TR97, TR98, TR99 CR920, CR940, CR960 ONH-970H - CR970, CR980, CR9070, CR L & 9R Flat $2800 CR9090 9L & 9R Angle $3100 All sets include Bolts, Nuts, Washers & Shims in the price. (08) Prices exclude GST 29

32 Wear Bars Convenient, Economical Replacement When the edges of your wear bars are worn, replace them with hardened or chromed wear bars. Order No. Model Application Contents of Set Price Price Standard Chrome Standard Chrome Case-Ih-Axial-Flow WBIHC-20H WBIHC-20C 1420, Bar Set Replaces Part C2 $170 $340 WBIHC-40H WBIHC-40C 1440, 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2344, Bar Set Replaces Part C2 $230 $450 WBIHC-40HL 1440, 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2344, Bar Set Oversize $295 WBIHC-80IH WBIHC-80IC 1480, 1680, 1688, 2188, Bar Set Replaces Part C2 $200 $260 WBIHC-80IHL WBIHC-801CL 1480, 1680, 1688, 2188, Bar Set Oversize $270 $365 WBIHC , 7120, 7230, 8010, 8120, 8230, 9120, Bar Set $350 John Deere STS WBJD STS, 9750STS, 9660STS, 9760STS Front Rotor Flight Kit $400 WBJD STS, 9750STS, 9660STS, 9760STS Rear Rotor Flight Kit $400 New Holland Twin Rotors WBNH-1H WBNH-1C TR70, TR85, TR86, TR87, Replaces Part Set for front of Rotors $340 $600 TR88, TR consists of 2 Left Hand Bars & TR96, TR97, TR98, TR99 2 Right Hand Bars CR940, CR Hardened Bars CR9040, CR9060 WBNH-2H WBNH-2C TR70, TR85, TR86, TR87, Replaces Part Set for Rear of Rotors $300 $440 TR88, TR89 consists of 2 Left Hand Bars & TR95, TR96, TR97, TR98, TR Right Hand Bars CR940, CR960, Hardened Bars CR9040, CR9060 WBNH-4H - TR95 Replaces Part Set for Front of Rotors $310 TR96 to S/No consists of 2 Left Hand & Right Hand Bars Replaces Part WBNH-19H CR970, CR980, CR9070, CR Set for Front of Rotors $540 WBNH-29H CR970, CR980, CR9070, CR Set for Rear of Rotors $540 Massey Ferguson WBMF-9700C 8560, 8570, 8590, White 9700, 9720 Chrome Rotor $520 All sets include Bolts, Nuts, Washers & Shims in the price. Case-Ih Axial Flow Rotor Blade Kit (Elephant Ears) All Sets Include Bolts & Nuts In The Price Order No. Model Application No. in Kit Price BK , $465 BK , 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2344, $825 BK , 1680, 1688, 2188, 2388, 2577 Specialty Rotor ( C3) 2 $525 BKAFX AFX Rotor 2 $540 Blade Kits are manufactured from abrasive resistant steel for longer wear. High strength. Grade 8 Bolts, Nuts included. AFX Standard or speciality 30 Prices exclude GST (08)

33 Gorden Rotor Bars For Case-IH Specialty Rotors Each Gorden Rotor Bar replaces two original bars. These bars achieve:- SUPERIOR THRESHING LESS ROTOR LOSS INCREASED CAPACITY but Less HP and Fuel Made from 15-3 chrome alloy. After hours you can barely see any wear the chrome is right through the bar. (Not just chrome plated). Fit a max of 15 bars on 2166, 2144, 2366, 2344, 1666, 1644 fit in sets of 3. Fit a max of 20 on 2188, 2388, 2377, 1688, 1680 fit in sets of 4. Fit a max of 16 bars on 8010, 8120, 8230, 9120 Order No. Description Model Application Price SP16601 Gorden Bar suits 1666, 2166, 2366 $130 ea Speciality Rotor Max 15 Bars per Rotor SP1680C1 Gorden Bar suits 1688, 2188, 2388, 8010 $130 ea Speciality Rotor 8120, 8230, 9120 Gorden Concave Cover Plates Order No. Description Model Application Price CP2166 Cover Plate Set 1640, 1660, 1666 $ , 2144, 2366 CP2188 Cover Plate Set 1680, 1688, 2188, 2588, 7088 $300 It s vital to shim your drum or rotor bars for proper threshing For improved threshing Avoid overloading the right hand side distribution augers Fit to the front concave segment and the first half of the second segment. Winged Chopper Blades Winged Chopper Blades throw trash further. Order No. Description Model Application Price CBCAT-480L Left Hand Winged Chopper Blade Cat 480, Claas Lexion $30 CBCAT-480R Right Hand Winged Chopper Blade Cat 480, Claas Lexion $30 CBNH-970L Left Hand Winged Chopper Blade New Holland CR970 $30 CBNH-970R Right Hand Winged Chopper Blade New Holland CR970 $30 Canola and Lupin Breakers These simple serrated brackets are attached to the cross auger on rigid to help break up bulky lupins or direct headed canola so the crop feeds better. Easily retracted out of the way for cereal crop harvesting. Order No. Description Price HPJDLB Canola and Lupin Breaker $12 ea (including bolts & nuts) (08) Prices exclude GST 31

34 Top Sieves and Pre Cleaners Cut losses Improve capacity STANDARD LOUVRE Air Foil Louvre Our Standard Louvre top sieves perform the same as originals, but have nylon bushes so they don t wear out! Airfoil Sieves come with every 2nd row of louvres removed towards the Front of the Sieve. This allows the bulk of the GRAIN to be removed quickly leaving the remainder of the sieve to fully clean up the sample and separate almost every last grain from the chaff. Special Air Foil Louvre design divides the airflow and creates a bed of air jets which float chaff up off the surface and allows the heavier grain to easily separate and fall. Nylon Anti-Wear Bush Nylon Bushes on all Wires to Drastically Reduce Wear 32 Prices exclude GST (08)

35 Top Sieves and Pre Cleaners Order No. Model Application Price Standard Air Foil Standard Air Foil Louvre Louvre Louvre Louvre Agco/Allis SGL-NRT PGL-NRT Allis N5, N6, N7, R60, R70 (49 1 / 2 Long) $1260 $1260 Sgl-r62rt pgl-r62rt Agco R62, R72, R75 (64 Long) $1530 $1530 Case International SIHC-1420RT PIHC-1420RT Inter 1420 Case-IH 1620 $990 $990 SIHC-1440RT PIHC-1440RT Inter 1440, 1460, 915, Case-IH 1640, 1660 $1140 $1140 SIHC-1666RT PIHC-1666RT Case-IH 1644, 1666, 2166, 2366 $1285 $1285 SIHC-1480RT PIHC-1480RT Inter 1480, Case-IH 1680 Standard Length Sieve $1430 $1430 SIHC-1680RTL PIHC-1680RTL Case-IH 1680 Long Sieve Models 1688, 2188, 2388, 2588, 7088 $1630 $1630 SNH-960RT PNH-960RT Case-IH 7010, 7120 $1070 $1070 SNH-960P PNH-960P Case-IH 7010, 7120 Precleaner $1020 $1020 SNH-970RT PNH-970RT Case-IH 7230, 8010, 8120, 8230, 9120, 9230 (set of 2 required) $940 ea $940 ea SNH-970P PNH-970P Case-IH 7230, 8010, 8120, 8230, 9120, 9230 Precleaner $1100 $1100 Caterpillar SCAT-470RT PCAT-470RT Caterpillar 470 (set of 2 required) $940 ea $940 ea SCAT-480RT PCAT-480RT Caterpillar 460, 480 (set of 2 required) $1100 ea $1100 ea Claas, Deutz, Horwood Bagshaw, Laverda, Shearer Available on Request John Deere SJD-7700RT PJD-7700RT John Deere 7700, 7720 $1250 $1250 SJD-7720T2RT PJD-7720T2RT John Deere 7720 Titan 2 $1355 $1355 SJD-8820-RT PJD-8820-RT John Deere 8820 $1570 $1570 See next page for STS Precleaners SJD-8820T2RT PJD-8820T2RT John Deere 8820 Titan 2 $1720 $1720 SJD-9500RT PJD-9500RT John Deere 9400, 9500, CTS, CTSII (set of 2 required) $550 ea $550 ea SJD-9500P PJD-9500P John Deere 9500, CTS, CTSII Precleaner (set of 2 required) $550 ea $550 ea SJD-9600RT PJD-9600RT John Deere 9600, 9610 (set of 2 required) $710 ea $710 ea SJD-9600P PJD-9600P John Deere 9600, 9610 Precleaner (set of 2 required) $710 ea $710 ea SJD-9650RT PJD-9650RT John Deere 9650, 9750 STS Models $1285 $1285 Manual Adjustment version (Fits some early 60 series also) SJD-9660RT PJD-9660RT John Deere 9660, 9760, 9860, 9670, 9770, 9870 STS Models $1285 $1285 Electric Adjustment version (Fits some late 50 series also) SJD-670RT PJD-670RT John Deere S660, S670, S680 (Excludes Wiring Harness AXE14081) $1530 $1530 HPJD-4081 HPJD-4081 Wiring Harness AXE Suit SJD670RT $180 $180 and PJD670RT - Fitted if sold with sieve Massey Ferguson SMF-9700RT PMF-9700RT MF9720 and White 9700 $1630 $1630 SMF-8780RT PMF-8780RT Massey Ferguson 8570, 8780, 9690 $1630 $1630 SMF-9790RT PMF-9790RT Massey Ferguson 9790, Challenger 670 $1780 $1780 New Holland SNH-8060RT PNH-8060RT New Holland 8060, 8070 $1020 $1020 SNH-70RT PNH-70RT New Holland TR70, TR85, TR86, TR87, TR88 $895 $895 SNH-95RT PNH-95RT New Holland TR95, TR96, TR97, TR98, TR99, TR89 $1200 $1200 SNH-TX34RT PNH-TX34RT New Holland TX34, TX64 $1125 $1125 SNH-TX66RT PNH-TX66RT New Holland TX66, TX68 (set of 2 required) $895 ea $895 ea SNH-960RT PNH-960RT New Holland CR940, CR960, CR6090, CR7090, CR8080, CR9060 $1070 $1070 (Not including linkages) SNH-960P PNH-960P New Holland CR940, CR960, CR6090, CR7090, CR8080 $1020 $1020 Pre Cleaner SNH-970RT PNH-970RT New Holland CR970, CX860, CX880, CX8080, CX8090, $945 ea $945 ea CR8090, CR9070, CR9080, CR9090 (Not including linkages) (set of 2 required) SNH-970P PNH-970P New Holland CX860, CX880, CX8080, CX8090, CR970 $1100 $1100 Precleaner CR8090, CR9070, CR9080, CR9090 If your sieve is not listed please enquire. We can probably make to order. (08) Prices exclude GST 33

36 John Deere STS Adjustable Precleaner Most JD STS s have fixed louvres on the precleaner. The Harvestaire Precleaner can be adjusted so you can clean up the sample and get maximum capacity. Complete with anti-wear nylon bushes. SJD-9650P John Deere 9650, 9750, 9660, 9760, 9860, 9670, 9770 Adjustable Pre Cleaner Flat Style $1125 SJD-9660PH John Deere 9650, 9750, 9660, 9760, 9860, 9670, 9770 Adjustable Pre Cleaner Hump style $1200 SJD-9870PF John Deere 9870, S670, S680 Adjustable Pre Cleaner Flat style $1125 SJD-9870PH John Deere 9870 Adjustable Pre Cleaner Hump style $1200 SJD-670PH John Deere S660, S670, S680 Adjustable Pre Cleaner Hump style $1200 Top Sieve Extensions available for John Deere 9400, 9500, CTS, TSII, 9600, 9610 New Holland 8060, 8070, 8080, TR85, TR86, TR87, TR88, TR95, TR96, TR97, TR98, TR99, TR89 Please Call For Price Electric Sieve Adjusters Adjust your Sieves from the Cab Store previous settings and recall when needed. Also store information on other machine settings. Adjust on the move to fine tune settings and reduce grain losses. Cleanout position enables quick adjustment to fully open. Adjust manually from side of machine at rear. Kit Includes: 2 electric actuators (for the top and bottom). Cab display and control unit. Wiring loom. Switch Box for location on side of machine at rear for manual adjustments. Order No. Item Model Application Price ESAKIT Electric Sieve Adjuster Most Brands and Models $ Prices exclude GST (08)

37 Bottom Sieves Cut losses Improve capacity STANDARD LOUVRE Air Foil Louvre Our Standard Louvre bottom sieves perform the same as originals, but have nylon bushes so they don t wear out! AirFoil sieves are virtually impossible to overload as the louvres do not deflect or close up under a heavy stream of grain as is frequently the case with traditional bottom sieves, particularly when they are worn. It is this problem with normal sieves that makes them very difficult to adjust. It s common to find the normal sieve either putting too much good grain in the repeats or letting too much rubbish in the sample. Strong Louvre Design prevents deflection by the weight of grain Nylon Anti-Wear Bush Nylon Bushes on all Wires to Drastically Reduce Wear (08) Prices exclude GST 35

38 Bottom Sieves Order No. Model Application Price Standard Air Foil Standard Air Foil Louvre Louvre Louvre Louvre Agco/Allis SGL-NB PGL-NB Allis N6, N7, R60, R62, R70 (42 1 / 2 Long) $1155 $1155 SGL-R62B PGL-R62B Agco R62, R72, R75 (57 1 / 4 Long) $1365 $1365 Case International SIHC-1420B PIHC-1420B Inter 1420, Case-IH 1620 $895 $895 SIHC-1440B PIHC-1440B Inter 1440, 1460 Case-IH 1640, 1660 $995 $995 SHIC-1666B PHIC-1666B Case-IH 1666, 1644, 2166, 2366 $1125 $1125 SIHC-1480B PIHC-1480B Inter 1480, Case-IH 1680 Standard Length Sieve $1300 $1300 SIHC-1680BL PIHC-1680BL Inter 1680 Long Sieve, Case-IH 1688, 2188, 2388, 2588, 7088 $1365 $1365 SNH-960B PNH-960B Case-IH 7010, 7120 $1050 $1050 SNH-970B PNH-970B Case-IH 7230, 8010, 8120, 8230, 9120, 9230 (set of 2 required) $840 ea $840 ea Caterpillar SCAT480B PCAT480B Caterpillar 480 $815 $815 Claas, Deutz, Horwood Bagshaw, Laverda, Shearer Available on Request John Deere SJD-7700B PJD-7700B John Deere 7700, 7720 $1020 $1020 SJD-7720T2B PJD-7720T2B John Deere 7720 Titan 2 $1125 $1125 SJD-8820B PJD-8820B John Deere 8820 $1175 $1175 SJD-8820T2B PJD-8820T2B John Deere 8820 Titan 2 $1255 $1255 SJD-9500B PJD-9500B John Deere 9400, 9500, CTS, CTSII (set of 2 required) $635 ea $635 ea SJD-9600B PJD-9600B John Deere 9600, 9610 (set of 2 required) $765 ea $765 ea SJD-9650B PJD-9650B John Deere 9650, 9750 STS Models $1175 $1175 Manual Adjustment Version (Fits some early 60 series also) SJD-9660B PJD-9660B John Deere 9660, 9760, 9860, 9670, 9770, 9870 STS Models $1175 $1175 Electric Adjustment Version (Fits some late 50 series also) SJD-670B PJD-670B John Deere S660, S670, S680 (Excludes Wiring Harness AXE14081) $1530 $1530 HPJD-4081 HPJD-4081 Wiring Harness AXE Suit SJD670B $180 $180 Massey Ferguson and PJD670B - Fitted if sold with sieve SMF-9700B PMF-9700B Massey Ferguson 9720 & White 9700 $1365 $1365 SMF-8780B PMF-8780B Massey Ferguson 8570, 8780, 9690 $1420 $1420 SMF-9790B PMF-9790B Massey Ferguson 9790, Challenger 670 $1530 $1530 New Holland SNH-8060B PNH-8060B New Holland 8060, 8070 (specify 1250mm or 1260mm wide) $1020 $1020 SNH-70B PNH-70B New Holland TR70, TR85, TR86, TR87, TR88 $865 $865 SNH-95B PNH-95B New Holland TR95, TR96, TR97, TR98, TR89, TR99 $1175 $1175 SNH-TX34B PNH-TX34B New Holland TX34, TX64 $1070 $1070 SNH-TX66B PNH-TX66B New Holland TX66, TX68 (set of 2 required) $840 ea $840 ea SNH-960B PNH-960B New Holland CR940, CR960, CR6090, CR7090, CR8080 $1050 $1050 (Not including linkages) SNH-970B PNH-970B New Holland CR970, CX860, CX880, CX8080, CX8090 $840 ea $840 ea CR8090, CR9070, CR9080, CR9090 (Not including linkages) (set of 2 required) 36 Prices exclude GST (08)

39 Gorden AirJet Sieve For Case-IH Axial Flows and New Holland cr models How AirJet Sieves Work The thin layer of high velocity air streaming from the AirJet above the screen blows chaff rearward. The heavier grain penetrates the streaming air and falls through the screen. The screens face towards oncoming grain for faster separation. Screen hole size is selected to match specific crops. Canola.125 (3.15mm) Round holes For improved capacity and cleaner samples No adjustment required just set the fan speed and go Mesh elements available for different crops Easily changed the frame remains in position Mesh Elements Available: Large Wheat.3 (7.62mm) Hex holes Air Jet Lupins/Barley.45 (11.4mm) Hex holes Air Jet Order No. Model Application & Description Price Case-IH Axial Flow AJCIH , 2188, 2377, 2388, 2588, Air Jet sieve frame $1210 AJNWLCN Set of canola elements suits AJCIH2388 $1570 AJNWLWH Set of large wheat elements suits AJCIH2388 $1420 AJNWLB Set of lupin/barley elements suits AJCIH2388 $1420 AJCIH , 2166, 2366, Air Jet sieve frame $1100 AJNLCN Set of canola elements suits AJCIH2366 $1260 AJNLWH Set of large wheat elements suits AJCIH2366 $1210 AJNLB Set of lupin/barley elements suits AJCIH2366 $1210 Case-IH 7230, 8010, 8120, 8230, 9120, 9230 & New Holland CR8090, CR970, CR9070, CR9080, CR9090 AJCNH T CIH 7230, 8010, 8120, 8230, 9120, 9230 & NH CR8090, CR970, CR9070, CR9080, CR9090 Air Jet sieve frame (2 required per machine) $660 AJCNH P CIH 7230, 8010, 8120, 8230, 9120, 9230 & NH CR8090, CR970, CR9070, CR9080, CR9090 Air Jet precleaner frame (1 required per machine) $660 AJCNHCNWP Set of canola elements suits AJCNHP Precleaner $790 AJCNHCNNT Set of canola elements suits AJCNHT Sieve (Enough for 1 machine) $1050 AJCNHLWP Set of large wheat elements Precleaner $680 AJCNHLWT Set of large wheat elements Sieve (Enough for 1 machine) $920 AJCNHLBP Set of lupin barley elements Precleaner $680 AJCNHLBT Set of lupin barley elements Sieve (Enough for 1 machine) $920 (08) Prices exclude GST 37

40 Canola Sieves These Sieves will get you through the tough receival standards This special mesh sieve has been specifically designed for Canola. If you are experiencing trouble with a Dirty Sample the use of our Mesh Sieve should clean up your canola and avoid the need to grade it after Harvest. These Sieves are fitted with Expanded Metal Mesh. We guarantee these Sieves will get your Canola clean enough to meet receival standards. PLEASE NOTE: Being a Mesh Sieve, occasional cleaning with a simple scraper may be required if your Canola has radish, volunteer cereals, green or excessive trash. Order No Model Application Price Agco/Allis ecgl-r62t Agco R62, R72 Top $950 Case International ECIHC-1666T Case-IH 1666, 2166, 2366, 1644, 2144, 2344 Top $850 ECIHC-1680T Inter 1680 LONG SIEVE, Case-IH 1688, 2188, 2388, 2377, 7088, 2588 Top $975 ECNH66T (set of 2 required) Case-IH 7230, 8010, 8120, 8230, 9120, 9230 Top $515 ea ECNHCR960T Case-IH 7010, 7120 Top $880 Caterpillar ECMF9790T Challenger 670 Top $1050 ECCAT480T (set of 2 required) Lexcen 460, 480 Top $515 ea John Deere ECJD-9500T (set of 2 required) John Deere 9400, 9500, CTS, CTSII, 9450 CWS, 9550 CWS Top $420 ea ECJD-9500E John Deere 9400, 9500, CTS, CTSII, 9450 CWS, 9550 CWS Extension $425 ECJD-9600T (set of 2 required) John Deere 9600, 9610, 9650 CWS, 9650 CTS Top $480 ea ECJD-9600E John Deere 9600, 9610, 9650 CWS, 9650 CTS Extension $460 ECJD-9650T John Deere 9650, 9750, 9660,9670, 9760, 9860, 9870 STS Top $920 ECJD-S670T John Deere S660, S670, S680 Top $960 Massey Ferguson ECMF8780 Massey Ferguson 8780, 9690 Top $950 ECMF9790 Massey Ferguson 9790 Top $1040 New Holland ECNH-70T New Holland TR85, TR86, TR87, TR88 Bottom or Top $660 ECNH-70E New Holland TR85, TR86, TR87, TR88 Extension $250 ECNH-95T New Holland TR95, TR96, TR97, TR98, TR89, TR99 Bottom or Top $825 ECNH-95E New Holland TR95, TR96, TR97, TR98, TR89, TR99 Extension $320 ECNH-66T (set of 2 required) New Holland CR970, CR8090, CR9070, CR9080, CR9090 Top $510 ea CX860, CX880, CX8080, CX8090, TX36, TX66, TX68 ECNHCR960T New Holland CR940, CR960, CR6090, CR7090, CR8080 Top $880 We can make to suit any harvester not listed above 38 Prices exclude GST (08)

41 Posifeed Rollers Posifeed Rollers overcome poor feeding at the feeder house or can be used as a replacement roller HEAVY DUTY The posifeed rollers are made as a triangular shape with rings for the chains to run on. The crop can be taken away more effectively as it has room between the slats of the feeder chain and open segments of the triangular roller. Crop feeds in more continuously and smoothly and doesn t feed in lumps. Originally fitted to Case-IH they worked so well that they have been fitted to other makes with good reports. Order No. Item Model Application Price Case-Ih PFRCIH60 Posifeed Roller 1420, 1440, 1460, 1620, 1640, 1660 suits 2 & 3 chain $ , 1666, 2144, 2166, 2344, 2366 PFRCIH80 Posifeed Roller 1480, 1680 suits 2 & 3 chain $ , 2188, 2388, 2377, 2588, 7088 John Deere PFRJD9500 Posifeed Roller 9400, 9500, CTS, CTSII $ STS, 9750STS, 9760STS, 9860STS PFRJD9600 Posifeed Roller 9600, 9610 $1100 PFRJD60AK Bearing Housing Required to fit roller to 9760 and 9860 STS models (2 required) $80 ea New Holland PFRNHTR86 Posifeed Roller TR87, TR88, TR89, TR86 after Serial No $850 (10 3 /4 Diameter) TR97, TR98, TR99 Use where original roller is 12 diameter. If original roller is 9 add links to feeder chain (08) Prices exclude GST 39

42 Feeder Chains Improved Hi-tensile Slats Top Quality Italian Chains All Slats Serrated Large stocks on hand at the right price Order No. Model Application Chain Number Description Price Type Of Chains Agco/Allis FGL-NB N5, N6, N7, R60, R70 CA557 3 Chain Heavy Duty U Slat suits Front or Rear $1135 ea FGL-4050 R40, R50, R42, R52 early CA550 2 Chain 85 Links Heavy Duty U Slat suits Front or Rear $700 FGL R62, R72 CA557 3 Chain 96 Links Heavy Duty U Slat suits Front or Rear $1250 ea Case International FIHC , 1440, 1460, 1620, CA557 3 Chain Heavy Duty U Slats. Extra Sprocket and $ , 1660, 1644, 1666 Feed Roller Bands required if fitting for first time FIHC , 1440, 1460, 1620, CA557 2 Chain $ , 1660, 1644, 1666 FIHC , 1680 CA557 3 Chain Heavy Duty U Slats. Extra Sprocket and $960 Feed Roller Bands required if fitting for first time FIHC , 1680 CA557 2 Chain $930 FIHC , 2166, 2366 CA557 3 Chain Heavy Duty U Slats $950 FIHC , 2188, 2377, 2388 CA557 3 Chain Heavy Duty U Slats $ , 7088 FIHC Case-IH 8010 (Early model) CA557 2 Chain Heavy Duty U Slats (12 7 / 8 centre to centre on chains) $900 ea 2 required per machine FIHC Case-IH 7010, 8010 CA557 2 Chain Heavy Duty U Slats (18 centre to centre on chains) $900 ea 2 required per machine FIHC Case-IH 7120, 7230, 8120 CA557 4 Chain Heavy Duty U Slats,115 links with Rocktrap $ , 9120, 9230 Chain Spacing 14, 15.5, 14 FIHC Case-IH 7120, 7230, 8120 CA557 4 Chain Heavy Duty U Slats, 97 links, non Rocktrap $ , 9120, 9230 Chain Spacing 12, 15.5, 12 FIHC C 2144, 2166, 2366 CA557 2 Chain $970 FIHC C 1688, 2188, 2388 CA557 2 Chain $1000 FIHC , 725 S52 3 Chain Heavy duty slats every 4th link $800 FEEDRBKITS Axial Flow models pre /8 Feed Roller Band Kit to fill recesses on $105 FEEDRBKIT2 Axial Flow models 1993 on 3 1 / 2 { Feed Roller to allow for 3 Chain conversion $105 NEW 40 Prices exclude GST (08)

43 Feeder Chains Order No. Model Application Chain Number Description Price Type of Chains Caterpillar FCAT-480L Lexcen 460, 480 left side CA624 2 Chain 108 links Heavy Duty U Slat $900 FCAT-480R Lexcen 460, 480 right side CA624 2 Chain 108 links Heavy Duty U Slat $900 FCAT-470 Lexcen 470 CA624 3 Chain 108 links Heavy Duty U Slat $1300 Claas FCL Claas 203,204 CA624 3 Chain 108 links Heavy Duty U Slat $1260 Deutz, Horwood Bagshaw, Shearer & Laverda Available on Request John Deere FJD , 6620 Titan 2 CA550 3 Chain Heavy Duty U Slat $900 FJD , 7720, 7720 Titan 2 CA557 3 Chain Heavy Duty U Slat $1050 FJD , 8820 Titan 2 CA557 4 Chain Heavy Duty U Slat $1550 FJD , 9500, CTS, CTSII, CA557 3 Chain 26 Slats 101 links $ , 9510, 9650CTS Heavy Duty U Slat FJD , 9610, CA557 4 Chain Heavy Duty U Slat $ CWS, 9660CWS FJD STS, 9750STS, CA557 3 Chain 30 Slats 90 links Heavy Duty U Slat $1190 FJD STS, 9760STS, 9860STS CA557 3 Chain 30 Slats 87 links HEavy Duty U Slat $1225 FJD-S670 S660, S670, S680, S690 CA557 3 Chain Extra Heavy Duty Slat $1500 SN-JD670 Slat only S660, S670, S680, S690 Extra Heavy Duty Slat $170 FJD , 1075 CA624 3 Chain T Slat $1450 Massey Ferguson FMF , 8780, 8780XP, 9690 CA557 3 Chain Heavy Duty U Slat $1420 FMF CA557 Heavy Duty U Slat $1475 New Holland FNH TR70, TR85, 8040 CA557 3 Chain 15 1 / 4 Centre to Centre sprockets $1175 FNH-95-7 TR95, TR96 prior serial CA557 3 Chain 21 1 / 8 Centre to Centre sprockets $1075 FNH-87-1 TR85, TR86, TR87, TR88, TR89, CA557 3 Chain 17 1 / 8 Centre to Centre sprockets, 93 links $1200 TR96, TR97, TR98, TR99 Heavy Duty U Slats FNH-CX860 CX840, CX860, CX880, CX8060 CA557 4 Chain Heavy Duty U Slats $1800 CX8070, CX8080, CX8090 FNH-CR960 CR920, CR940, CR960, CR6090 CA557 3 Chain Heavy Duty U Slats, 111 links $1400 CR7090, CR8080, CR9060 FNH-CR970 CR970, CR980, CR9070, CR9080 CA557 3 Chain Heavy Duty U Slats $1550 FNH-CR CR8090, CR9070, CR9080, CR9090 CA557 4 Chain Heavy Duty Slats $1975 FNH , 8070 CA557 3 Chain $1220 FNH CA557 3 Chain 20 1 / 4 Centre to Centre sprockets $1225 FNH-TX34 TX34 CA557 3 Chain $1350 FNH-TX66 TX66 Early, TX66 Standard CA557 3 Chain Heavy Duty Angle Slats $1550 FNH-TX66-47 TX66 Late, TX68 Plus CA557 4 Chain Heavy Duty Angle Slats $1850 FNH-TX64-7 TX64, TX65 CA557 3 Chain Advise if 20 1 / 4 or 22 1 / 4 centres $1525 NEW NEW Massey Ferguson Feed Elevator Paddles Order No. Model Application Description Number Price EP , 850 Full Set Pre Drilled 10 $300 EP , 850 Suits Top Shaft, 12 Bolt Holes 1 $31 EP , 850 Suits Bottom and Middle Shaft, 8 Bolt Holes 1 $31 EP , 860 Full Set Pre Drilled 10 $340 EP , 860 Suits Top Shaft, 14 Bolt Holes 1 $33 EP , 860 Suits Bottom and Middle Shaft, 9 Bolt Holes 1 $33 Replacement slats available All makes and models (08) Prices exclude GST 41

44 Sprockets for Feeder Chains Feeder Chains Drive Sprockets Order N. of Shaft No. Model Application Teeth Size Price Agco/Allis FM-150 N & R Series Feeder & Separator / 2 Hex $110 FM-154 R42 after S/No , R52 after S/No / 4 Hex $150 R62 after S/No , R72 after S/No FM-155 R65, R66, R75, R Hex $150 Case International FM , 1440, 1460, 1480, 1620, / 2 Hex $ , 1660, 1680, 1644, 1666, , 2166, 2366, 2188, 2388, 2588 FM-91 As previous item In Split Form / 2 Hex $120 SPT-1680 Sprocket Tube for 3 Chain Feeder Chain $750 Suits 1688, 2188, 2388, 2588, 2377, 2577 (sprockets flush with ends) SPT-2577 Sprocket Tube for 3 Chain Feeder Chain $840 Suits 2388 above S/N o HAJ03001,2577, 2588 (sprockets inset from each end 50mm) SPT-1680SK Stripper Kit suits 80 Series 3 Chain $140 SPT-1660SK Stripper Kit suits 60 Series 3 Chain $140 SPT-8010 John Deere Sprocket Tube for 2x2 Chain Feeder Chain 7010, 8010 $980 FM , 7720, 8820, 9400, 9500, 9600, CTS / 4 Hex $80 FM-112 As previous item in Split Form / 4 Hex $100 FM-113 CTSII, 9510, 9610, 9650 Outside / 4 Round $60 FM-114 CTSII, 9510, 9610, 9650 Centre / 4 Round $70 FM STS, 9750 STS, / 4 Round $ STS, 9760STS, 9860STS Outside FM STS, 9750 STS, / 4 Round $ STS, 9760STS, 9860STS Centre FM , 975 Outer 14 35mm Round $65 FM , 975, 1065, 1075, 1051 Outside 14 40mm Round $105 FM , 975, 1065, 1051 Inner 14 40mm Round $75 NEW To avoid premature stretching of chains, replace all driving sprockets when fitting a new chain Also ensure that the teeth on all sprockets are in line with each other. New Holland FM-12 TR70, early TR85 Outside / 4 Round $90 FM-120 TR70, early TR85 Centre / 4 Round $80 FM-121H TR85, TR86, TR87, TR88, TR89, / 4 Hex $150 TR95, TR96, TR97, TR98, TR99 CR940, CR960, CR970, CR980 CR9060, CR9070 Outside FM-122H TR85, TR86, TR87, TR88, TR89, / 4 Hex $140 TR95, TR96, TR97, TR98, TR99 CR940, CR960, CR970, CR980 CR9060, CR9070 Centre FM , 8060, 8080, TX34, mm Round $90 FM , 8060, 8080, TX34 Centre 10 50mm Round $90 42 Prices exclude GST (08)

45 Hi-Tooth Slats Positive Grabbing Of Crop Material For greatly improved feeding in those thin or difficult to feed crops. Tried and proven on Case-IH. Patent Applies Order No. Model Application Chain Number Description Price Type of Chains FIHC HT 1420, 1440, 1460, 1620 CA557 3 Feeder Chain fitted with Hi-Tooth Slats $ , 1660, 1644, 1666 FIHC HT 1480, 1680 CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1175 FIHC HT 2144, 2166, 2366 CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1225 FIHC HT 1688, 2188, 2377, 2388, 2588 CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1275 Slat Inserts And Slats For Original Chains Order No. Model Application Chain Number Description Price Type of Chains SN12HT , 1620, 1640, 1660, 2 Slat Insert add to Original Slat on 2 Chain versions $50 ea 1644, 1666, 2144, 2166 SN12HT , 1680, 1688, Slat Insert add to Original Slat on 2 Chain versions $54 ea SN10HT660E Slat replaces Original Slat on 3 chain versions $50 ea SN10HT880E 2377, Slat replaces Original Slat on 3 chain versions $54 ea Grain Elevator Chains All paddles are top quality new insertion rubber Tough and Hard wearing. Paddles are bolted to High Quality Italian chain. Sprockets We stock high quality sprockets to suit nearly all the Feeder Chains and Grain Elevator Chains we sell. Some feeder house sprockets available in split form for ease of replacement. (08) Prices exclude GST 43

46 Grain Elevator Chains CLEAN GRAIN RETURN GRAIN Order No. Model Application Chain Type Price Order No. Chain Type Price Agco/Allis GGL-N (34 Paddles) N5 up to 6100, N6 up to 7300, N7 CA550 $525 RGL-N (17 Paddles) CA550 $350 GGL-R40 (34 Paddles) R40, R50 CA550 $575 RGL-4252 (30 Paddles) CA550 $550 GGL-R60 (35 Paddles) R60, R70 (N5 above 6101, N6 above 7301) CA550 $600 RGL-N-27 (27 Paddles) CA550 $525 GGL-R62 (36 Paddles) R62 after 63001, R72 after CA550 $675 RGL-4252 (30 Paddles) CA550 $550 GIHC-1420 R42 after 43001, R52 after Case International GIHC , 1620 CA550 $650 RIHC-1460 CA550 $450 GIHC , 1620 CA557 $725 RIHC CA557 $600 GIHC , 1460 CA550 $675 RIHC-1460 CA550 $450 GIHC , 1460 CA557 $750 RIHC CA557 $600 GIHC , 1660, 1644, 1666, 2144 CA557 $780 RIHC CA557 $ , 2344, 2366 GIHC , 1680, 1688 CA550 $625 RIHC-1460 CA550 $450 GIHC , 1680, 1688, 2188, 2388, 2588 CA557 $800 RIHC CA557 $600 GIHC , 7120, 8010, 8120, 9120 CA557 $ GIHC-711 INTER 711, 710, 726 S52 $600 RIHC-711 S52 $450 GIHC INTER 725 (39 PADDLES) S52 $590 RIHC-711 S52 $450 Caterpillar GCAT , CA624 $725 RCAT460 CA624 $550 Claas, Deutz, Horwood Bagshaw, Laverda & Shearer Available on Request John Deere GJD , 7720, 6620T2 CA550 $450 RJD CA550 $425 GJD , 8820T2, 7720T2 CA550 $400 RJD CA550 $425 GJD , 9500, 9510, CTS, CTS II, 9650CTS CA550 $500 RJD9400 CA550 $475 GJD , 9610 CA550 $500 RJD9400 CA550 $475 GJD STS, 9750STS, 9660STS, 9760STS CA557 $650 RJD Heavy Duty CA557 $ STS, 9670STS, 9770STS, 9870STS, S670, S680 Massey Ferguson GMF , 850, 760, 860 CA550 $650 RMF-750 CA550 $375 GMF , 8780, (Advise if paddles 3 or 4 high) CA557 $700 RMF-9790 CA557 $600 New Holland GNH-70-1 TR70, TR85, TR86, TR87, TR88, CA550 $350 RNH-70-4 CA550 $425 GNH TR70, TR85, TR86, TR87, TR88 CA557 $435 RNH CA557 $570 GNH TR95, TR96, TR97, TR98, TR89 CA557 $495 RNH CA557 $570 GNH-99-7 TR99 CA557 $495 RNH CA557 $570 GNH , 8070, 8080 CA550 $360 RNH-8060 CA550 $300 GNH , 8070, 8080 CA557 $425 RNH CA557 $400 GNH-TX34 TX34, TX64 CA550 $ GNH-TX66 TX66 CA557 $ GNH-CR960-7 CR920, CR940, CR960, CR970 CA557 $ CR9070, CR9080, CR9090, CX840, CX860, CX880 CA557 is Heavy Duty 44 Prices exclude GST (08)

47 Sprockets for Grain Elevator Chains IMPORTANT NOTE: Before installing one or more sprockets, do a visual inspection on the used sprockets you plan to run together with a new sprocket. If you notice a substantial wear factor in any, then it is important to replace all the sprockets. Order No. Model Application Original Number Shaft Size Price Part No. of Teeth Agco/Allis Clean Grain Elevator Upper SP099 N6 above S/No 6501, N7 above S/No 4501, R60, R Tooth 1 1 / 4 Bore $80 SP095 R40, R Tooth 1 Bore $55 SP098 R42, R52, R62, R72 No Hub Tooth NA $80 Clean Grain Elevator Lower SP097 R60, R Tooth 1 Bore $120 SP098 R42, R52, R62, R72 No Hub Tooth NA $80 SP106 N5, N6, N7 before Series Tooth 1 1 / 4 Bore $80 SP105 N7 to S/No Tooth 1 Bore $90 Return Grain Elevator Upper SP101 N5, N6, N Tooth 1 Bore $80 SP095 R40, R50, R60, R Tooth 1 Bore $55 SP098 R42, R52, R62, R72 No Hub Tooth NA $80 Return Grain Elevator Lower SP095 N5, N6, N7, R40, R50, R60, R Tooth 1 Bore $55 SP098 R42, R52. R62. R72 No Hub Tooth NA $80 Case International Clean Grain Elevator Upper SP C1 7 Tooth 1 Bore $75 SP , 1440 to S/No 10000, 1460 to S/No C1 6 Tooth 1 Bore $75 SP , 1460 above S/No 12001, 1480 S/No C1 7 Tooth 1 1 / 8 Bore $80 SP , 1644, 1660, 1666, 1680, 1688, 2144, 2166, C1 9 Tooth 1 1 / 4 Bore $ , 2366, 2388 SP , 8010, 7120, 8120, Tooth 35mm Bore $105 Clean Grain Elevator Lower SP , 1440 to S/No 10000, 1460 to S/No C1 6 Tooth 1 Bore $75 SP above S/No 1001, 1460 above S/No C1 7 Tooth 1 Bore $75 SP S/No to C1 7 Tooth 1 1 / 8 Bore $80 SP above S/No 30484, 1460 above S/No 33286, C1 7 Tooth 1 1 / 4 Bore $ above S/No SP , 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2344, C1 9 Tooth 1 1 / 4 Bore $90 SP , A1 9 Tooth 1 3 / 8 Bore $70 SP , 8010, 7120, 8120, Tooth 45mm Bore $100 Return Grain Elevator Upper SP , 1440 to S/No 10000, 1460 to C1 6 Tooth 1 Bore $75 S/No 12000, 1480 to S/No SP above S/No 10001, 1460 above S/No 13001, C1 7 Tooth 1 Bore $ above S/No 14001, 1640, 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2388 Return Grain Elevator Lower SP , 1440 to S/No 10000, 1460 to S/No C1 6 Tooth 1 Bore $75 SP above S/No 10001, 1460 above S/No 12001, C1 7 Tooth 1 Bore $ , 1660, 1644, 1666 SP , S/No to 34000, 1680, C1 7 Tooth 1 1 / 8 Bore $80 SP , 2166, 2188, 2344, 2366, A1 7 Tooth 1 1 / 4 Bore $80 John Deere Clean Grain Elevator Upper SP , 6620T2, 7700, 7720, 7720T2, 8820 to S/No H Tooth 1 Bore $60 SP above S/No , 8820T2 H Tooth 1 1 / 4 Bore $70 SP , 9500, 9510, 9600, 9610, CTS, CTSII H Tooth 30mm Bore $70 SP STS, 9750 STS, 9660 STS, 9750 STS H Tooth 30mm Bore $60 SP STS, 9870 STS, S670, S680 H Tooth 45mm Bore $60 Clean Grain Elevator Lower SP , 975 to S/No Z Tooth 25mm Bore $120 SP above S/No , 1065, 1075 to S/No , 1051 Z Tooth 30mm Bore $90 SP , 6620T2, 7700, 7720, 7720T2, 8820, 8820T2 H Tooth 1 1 / 4 Bore $70 SP , 9500, 9600, 9610, CTS, CTS II, 9650 STS, 9750 STS H Tooth 35mm Bore $ STS, 9760 STS SP STS, 9870STS, 9670STS, S670, S680 H Tooth 45mm Bore $60 (08) Prices exclude GST 45

48 Sprockets for Grain Elevator Chains Order No. Model Application Original Number Shaft Size Price Part No. of Teeth Return Grain Elevator Upper SP , 7700, 7720 to S/No H Tooth 1 Bore $50 SP above S/No , 7720T2, 8820, 8820T2 H Tooth 1 Bore $60 SP , 9500, 9600, 9610, CTS, CTS II H Tooth 1 Hex $60 SP STS, 9750 STS, 9660 STS, 9760 STS, 9860 STS H Tooth 30mm Bore $ STS, 9870STS, S670, S680 Return Grain Elevator Lower SP , 7700, 6620T2 H Tooth 1 Bore $50 SP above S/No , 8820, 8820T2 H Tooth 1 Bore $60 SP to S/No , 7720T2 H Tooth 1 1 / 4 Bore $55 SP , 9500, 9600, 9610, CTS, CTS II H Tooth 1 Hex $60 SP STS, 9750 STS, 9660 STS, 9760 STS, 9860 STS H Tooth 35mm Bore $ STS, 9870STS, S670, S680 Massey Ferguson Clean Grain Elevator Upper SP , 760, 850, M1 8 Tooth 1 1 / 8 Bore $80 Clean Grain Elevator Lower SP , 760, 850, M1 8 Tooth 1 1 / 8 Bore $80 Return Grain Elevator Upper SP , 760, 850, M1 8 Tooth 1 1 / 16 Bore $60 SP , 760, 850, M1 8 Tooth 1 1 / 8 Bore $80 Return Grain Elevator Lower SP , 760, 850, M1 8 Tooth 1 1 / 16 Bore $60 SP , 760, 850, M1 8 Tooth 1 1 / 8 Bore $80 New Holland Clean Grain Elevator Upper SP134 TR70, 85, 86 to S/No , 87, Tooth 1 Bore $75 SP135 TR95 above S/No , 96, 97, Tooth 1 1 / 8 Bore $90 SP138 TR89, TR Tooth 1 3 / 8 Bore $95 SP195 CR920, CR940, CR960, CR970, CR8090, CR Tooth 35mm Bore $130 CR9090, CX880, CX8080, CX8090 SP , 8080, TX34, TX64, TX Tooth 30mm Bore $75 Clean Grain Elevator Lower SP134 TR70, 85, 86, 87, Tooth 1 Bore $75 SP135 TR85, 87, 95, 96, 97, Tooth 1 1 / 8 Bore $90 SP138 TR87, 88, 89, Tooth 1 3 / 8 Bore $95 SP195 CR920, CR940, CR960, CR970, CR8090, CR Tooth 35mm Bore $110 CR9090, CX880, CX8080, CX8090 SP , 8060, 8070, 8080, TX34, TX64, TX Tooth 30mm Bore $65 Return Grain Elevator Upper SP134 TR70, 85, 86, 87, 88, 89, 95, 96, 97, Tooth 1 Bore $75 SP , 8070, Tooth 30mm Bore $75 Return Grain Elevator Lower SP134 TR70, 85, 86, Tooth 1 Bore $75 SP135 TR95, 96, Tooth 1 1 / 8 Bore $90 SP138 TR87, 88, 89, 98, Tooth 1 3 / 8 Bore $95 SP , 8070, Tooth 30mm Bore $75 Chain Spare Parts Order No. Chain Type Description Price L-5 CA550 Straight Connector $6 L-50 CA550 Offset Connector $7 L-7 CA557 Straight Connector $7 L-70 CA557 Offset Connector $8 L-71 CA557 K39 Connector 2 Hole Centres $14 L-72 CA557 K38 Connector 2 1 / 4 Hole Centres $14 L-7B CA557 Straight Connector Bolt/Nut Type $18 L-70B CA557 Offset Connector Bolt/Nut Type $22 AN-83 S52 Straight Connector $6 AN-84 S52 Offset Connector $7 AN-86 CA624 Straight Connector $7 AN-87 CA624 Offset Connector $8 46 Prices exclude GST (08)

49 Laminated Knives For Headers up to 30ft Benefits Considerable Cost Saving. Quick & Easy repair in the Paddock. (no welding required) Fitted with Long-Life Large or Fine Chrome Serrated Knife Sections Easily freighted overnight or will fit into a car or ute. Packs into 2 metres (6ft) Order No. Order No. Model Application & Description Price Price Single Point Double Cut Width Single Point Double Cut Agco/Allis LHKAC2S LHKAC2D Knife with Knife Sections Agco/Allis 24ft $625 LHKAC3S Knife with Knife Sections Agco/Allis 30ft $785 Case International lhkih2s lhkih2d Knife with Knife Sections International ft 6 $570 $700 lhkih3s lhkih3d Knife with Knife Sections International ft $625 $750 lhkih4s lhkih4d Knife with Knife Sections International ft $785 $975 lhkcih2s lhkcih2d Knife with Knife Sections Case-IH 1010, ft $640 $785 lhkcih3s lhkcih3d Knife with Knife Sections Case-IH 1010, ft $785 $975 LHKNH6S LHKNH6D Knife with Knife Sections Case-IH 2010, Double Drive 30ft $950 $1080 John Deere LhKJD2S LhKJD2d Knife with Knife Sections John Deere ft $560 $690 LhKJD3S LhKJD3d Knife with Knife Sections John Deere 200, ft $625 $750 LhKJD4S LhKJD4d Knife with Knife Sections John Deere ft $640 $785 LhKJD5S LhKJD5d Knife with Knife Sections John Deere 200, ft $785 $975 Massey Ferguson LhKMF2S LhKMF2d Knife with Knife Sections Massey Ferguson 24ft $625 $750 LhKMF3S LhKMF3d Knife with Knife Sections Massey Ferguson 30ft $785 $975 New Holland LhKNH2S LhKNH2d Knife with Knife Sections New Holland ft $560 $690 LhKNH3S LhKNH3d Knife with Knife Sections New Holland ft $640 $785 LhKNH4S LhKNH4d Knife with Knife Sections New Holland 806 Double Drive 26ft $785 $940 LhKNH5S LhKNH5d Knife with Knife Sections New Holland 806 Double Drive 30ft $950 $1080 LhKNH6S LhKNH6d Knife with Knife Sections New Holland 971, 71C, 73C Double Drive 30ft $950 $1080 Knifeheads Available Optional See Page 53 Order No. Spare Parts Price LKBPCE Knife back only. Use 2 to form a two metre length (Fits all makes) Square/Rectangular Holes (Used on 1997 and prior knives) $30 each piece LKBPCE-1 Round/Oblong Holes (Used on 1998 and later knives) $30 each piece Knives for Claas, Deutz & Laverda are available (08) Prices exclude GST 47

50 Laminated Hay & Swather Knives Order No. Model Application Width Price Case-Ih HAYNH2 Case-IH ft $345 CNHKNIFE30 Case-IH Swather Knife 30ft $785 Other Case-IH Hay Equipment Knives Quickly Made to Order Hesston HAYHS1 Hesston Hay Knife 10ft $285 HAYHS2 Hesston Hay Knife 14ft $410 HAYHS4 Hesston Hay Knife 25ft $640 New Holland HAYNH1 New Holland 469, 489 Hay Knife 9ft $265 HAYNH2 New Holland (Single Knife Drive) 495 Hay Knife 12ft $345 HAYNH3 New Holland (Double Knife Drive) 499 Hay Knife 12ft $475 HAYNH4 New Holland (Double Knife Drive) 114 Hay Knife 14ft $550 HAYNH5 New Holland (Double Knife Drive) 2300 Hay Knife 16ft $630 CNHKNIFE 30 New Holland Swather Knife 30ft $785 Macdon MACKNIFE 25 Macdon Swather Knife 25ft $640 MACKNIFE 30 Macdon Swather Knife 30ft $785 Versatile VERKNIFE20 Versatile Swather Knife 20ft $550 VERKNIFE24 Versatile Swather Knife 24ft $625 VERKNIFE28 Versatile Swather Knife 28ft $690 Fine Top Serrated Knife Sections for Swathing or Fine Grasses Large Top Serrated Knife Sections for Cereal Hay Fine Under Serrated Knife Sections for Swathing of Fine Grasses Knifeheads available - optional - See page 53 Laminated Comb Front Knives Comb Front Knives Are Still Available Fitted with Double Cut Sections For Inter 711, 725 Massey Ferguson 585, 542, 3342, 5500 New Holland Horwood Bagshaw Call for a Price and Details 48 Prices exclude GST (08)

51 Solid Backbone Knives For Belt Fronts 30ft to 50ft Made from the same American material as Original Knives, Huge Cost Savings, Backbone Only OR Full Knives with sections attached. Order No. Model Application & Description Price Agco Complete Knife hkag36 36ft Knife including 12ft Reinforcing Strap at Drive End $1020 Spare Parts SKBAG Knifeback only with Holes suits Agco Belt Front (No Knife Sections) $13 per ft SKBJS-AG Joining Strap with Bolts and Nuts $36 CaseIH and Macdon including Swathers Complete Knives HKMD30 30ft Knife $755 HKMD30DD 30ft Knife suits Double Knife Drive System (including Centre Overlap) $815 hkmd36 36ft Knife including 12ft Reinforcing Strap at Drive End $1020 hkmd39 39ft Knife including 12ft Reinforcing Strap at Drive End $1070 hkmd40dd 40ft Knife suits Double Knife Drive System (including Centre Overlap) $1095 HKMD45DD 45ft Knife suits Double Knife Drive System (including Centre Overlap) $1305 hkmdl 21ft Knife suits Drive End 36ft and 39ft including Reinforcing Strap $640 hkmdr36 15ft Knife suits Right Hand End of 36ft $380 hkmdr39 18ft Knife suits Right Hand End of 39ft $1080 HKMDL40 20ft Knife suits Left Hand End of 40ft $500 HKMDR40 20ft Knife suits Right Hand End of 40ft $500 HKMDL / 2 ft, Knife suits left hand end of 45ft $620 HKMDR / 2 ft, Knife suits right hand end of 45ft $620 Spare Parts skbmd Knifeback only with holes suits Case-IH/Macdon Belt Fronts (No Knife Sections) $13 per ft SKBJS-MD Joining Strap with Bolts and Nuts $36 MDOL Centre Overlap suits Macdon Double Drive Knives $72 Honeybee and New Holland Complete Knives hkhb30 30ft Knife $815 HKHB30DD 30ft Knife suits Double Knife Drive System (including Centre Overlap) $890 hkhb36 36ft Knife including 12ft Reinforcing Strap at Drive End $1100 HKHB36SCH 36ft Knife suits SCH Knife Guards $1370 hkhb36dd 36ft Knife suits Double Knife Drive System (including Centre Overlap) $1070 HKHB36DDSCH 36ft Knife suits Double Drive and SCH Knife Guards $1300 hkhb39 39ft Knife including 12ft Reinforcing Strap at Drive End $1195 HKHB39DD 39ft Knife suits Double Knife Drive System (including Centre Overlap) $1150 HKHB40DD 40ft Knife suits Double Knife Drive System (including Centre Overlap) $1170 hkhb42dd 42ft Knife suits Double Knife Drive System (including Centre Overlap) $1225 Knifeheads NOT included with Knives - See page 53 (08) Prices exclude GST 49

52 Solid Backbone Knives Order No. Model Application & Description Price Honeybee and New Holland Complete Knives HKHB42DDSCH 42ft Knife suits Double Drive and SCH Knife Guards $1280 HKHB45DD 45ft Knife suits Double Knife Drive System (including Centre Overlap) $1305 HKHB45DDSCH 45ft Knife suits Double Drive and SCH Knife Guards $1360 hkhbl 21ft Knife suits Drive End of 36ft and 39ft including Reinforcing Strap $690 hkhbr36 15ft Knife suits Right Hand End of 36ft $410 hkhbr39 18ft Knife suits Right Hand End of 39ft $490 HKHBL42 21ft Knife suits Left Hand End of 42 ft $585 hkhbr42 21ft Knife suits Right Hand End of 42 ft $585 hkhbl / 2 ft Knife suits Left Hand End of 45 ft $625 hkhbr / 2 ft Knife suits Right Hand End of 45 ft $625 Spare Parts skbhb Knifeback only with holes suits Honeybee/New Holland Belt Fronts (No Knife Sections) $13 per ft skbjs-hb Joining Strap with Bolts and Nuts $36 HBOL Centre Overlap suits Honeybee Double Drive Knives $72 John Deere (with 4 Dura-Twin Sections) Complete Knives HKJD30 30ft Knife $1065 HKJD35 35ft Knife including 12ft Reinforcing Strap at Drive End $1255 HKJD36 36ft Knife including 12ft Reinforcing Strap at Drive End $1285 HKJD40DD 40ft Knife suits Double Knife Drive System (Including Centre Overlap) $1425 HKJD42DD 42ft Knife suits Double Knife Drive System (Including Centre Overlap) $1495 HKJD45DD 45ft Knife suits Double Knife Drive System (Including Centre Overlap) $1650 HKJDL40 20ft Knife suits Left Hand End of 40ft $685 HKJDR40 20ft Knife suits Right Hand End of 40ft $685 HKJDL 18ft Knife suits Drive End of 35ft and 36ft including Reinforcing Strap $690 HKJDR35 17ft Knife suits Right Hand Side of 35ft $570 HKJDR36 18ft Knife suits Right Hand Side of 36ft $600 Spare Parts skbjd Knifeback only with holes suits John Deere Belt Fronts (No Knife Sections) $13 per ft skbjs-jd Joining Strap with Bolts and Nuts $36 Midwest Complete Knives Mid West Knives are fitted with SCH (Honeybee) type Knife Sections. 4 Doublecut John Deere type sections, available on request HKMW40DD 40ft Knife suits Double Knife Drive System (including Centre Overlap) $1170 HKMW42DD 42ft Knife suits Double Knife Drive System (including Centre Overlap) $1225 HKMW45DD 45ft Knife suits Double Knife Drive System (including Centre Overlap) $1305 HKMW50DD 50ft Knife suits Double Knife Drive System (including Centre Overlap) $1450 HKMWL40 20ft Knife suits Left Hand End of 40ft $550 HKMWR40 20ft Knife suits Right Hand End of 40ft $550 HKMWL42 21ft Knife suits Left Hand End of 42ft $580 HKMWR42 21ft Knife suits Right Hand End of 42ft $580 HKMWL / 2 Knife suits Left Hand End of 45ft $625 HKMWR / 2 Knife suits Right Hand End of 45ft $625 HKMWL50 25ft Knife suits Left Hand End of 50ft $695 HKMWR50 25ft Knife suits Right Hand End of 50ft $695 Spare Parts SKBHB Knife back only with holes suits Midwest Belt Fronts (No Knife Sections) $13 per ft SKBJS-HB Joining Strap with Bolt & Nut $36 HBOL Centre Overlap suits MidWest Double Drive Knives $72 Reinforcing Straps Strap is 3mm ( 1 / 8 ) thick stainless steel and utilises existing bolts. Retro fit is easy. No need to change hold down clips. agss Reinforcing Strap suits Agco 6ft Section $82 mdss Reinforcing Strap suits CaseIH/Macdon 6ft Section $82 HBss Reinforcing Strap suits Honeybee/New Holland 6ft Section $82 JDss Reinforcing Strap suits John Deere 6ft Section $97 Knifeheads NOT included with Knives. See page 52 Eliminate almost 100% of knife breakages. Fit to first 12ft at knife drive end. 50 Prices exclude GST (08)

53 Knife Sections for Harvest Hay & Swathers Order No. s Model Application Coarse Fine Double Coarse Fine Double Serrated Serrated Cut Serrated Serrated Cut Single Single Single Single Point Point Point Point Agco/Allis KSSPAC KSSPACF Agco/Allis L, N & R Series $2.50 $ KSSPACBF Agco Belt Front - $ Deutz KSSPDEC KSDCDEC Deutz Fahr $ $4 Claas KSSPCL KSSPCLF KSDCCL Claas $2.50 $2.50 $4 Honeybee KSSPHB KSSPHBF KSDCHB Honeybee, New Holland and Midwest Belt Fronts $2.50 $2.50 $4 KSSPHBM Honeybee, New Holland and Midwest Belt Fronts SCH Original Sections $3 - - KSSPHBCS Knife Section suits centre overlap with 2 Torx Screws and Nuts $7 $7 - Case-Ih KSSPIH KSSPIHF KSDCIH International 810 Front $2.50 $2.50 $4 KSSPCNH KSSPCNHF KSDCJDNHF Case-IH 1010, 1020 and 2010 series, Fronts $2.50 $2.50 $4 Case-IH Mower Conditioners, Swathers KSUSCNH Case-IH Mower Conditioner & Swathers - Underserrated $2.50 John Deere KSSPJDNH KSSPJDNHF KSDCJDNHF John Deere 200 and 900 series Fronts $2.50 $2.50 $4 KSDCJDA John Deere Draper and 600 series Fronts 4 wide Double Cut Fine - - $3.75 KSDCJDB John Deere Draper and 600 series Fronts 4 wide Double Cut Coarse - - $3.75 Macdon KSSPMAC KSSPMACF Macdon & Case-IH Harvester Belt Fronts, Macdon Swathers $2.50 $ KSUSMAC Macdon Swathers - Underserrated $2.50 Massey Ferguson KSSPMF KSSPMFF KSDCMF Massey Ferguson $2.50 $2.50 $4 New Holland KSSPCNH KSSPCNHF KSDCJDNHF New Holland 971, 71C, 72C and 73C $2.50 $2.50 $4 New Holland, Hesston, Case-IH Mower Conditioners, Praire Mac and Case-IH Swathers KSSPJDNH KSSPJDNHF KSDCJDNHF New Holland 705 and 806 Series Fronts Versatile KSSPVER Versatile Swathers - $ Comb Front Machines KSCF KSDCCF Comb Front Machines IH, MF & NH - $3.70 $4.50 End Sections KSSPLHEND - Left Hand 1 1 /2 Section fits nearly all models - - $9 KSSPRHEND - Right Hand 1 1 /2 Section fits nearly all models - - $8 KSSPMACLH - Left Hand 1 /2 section - fits nearly all models - - $2.40 KSSPMACRH - Right Hand 1 /2 section - fits nearly all models - - $2.40 Knife Sections with Countersunk Holes in Stock (for centre overlaps - Double Knife Drives) - Please Ask (08) Prices exclude GST 51

54 Knife Sections Fixings & Accessories High tensile bolts with high tensile locking wizz nuts Zinc Plated Price includes nut Order No. Versatile Swather - BOLTS & NUTS Knife Guard Bolts & Nuts Order Order Length No. 3/8 Price No. 7/16 Price 1 KGBN25mm 90 KGBN25M1 $ /4 KGBN32mm 90 KGBN32M1 $ /2 KGBN38mm 95 KGBN38M1 $ /4 KGBN45mm $1.20 KGBN45M1 $2 2 KGBN50mm $1.35 KGBN50M1 $ /2 KGBN64mm $1.60 KGBN64M1 $ /8 Wizz Nut KGNUT /16 Wizz Nut KGNUT Rivets Open Front KSOFRIVT 5.2 x 15mm Suits Open Front $13 per 100 knife sections KSOFHDR3 5.2 x 32mm Suits Open Front knifehead 24 each KSOFHDR2 1 /4 x 1 1 /4 Suits Inter 810 knifehead 30 each KSOFRICL 6 x 18mm Suits Claas late models $15 per 100 KSOFRICL2 6 x 30mm Head Rivets suits Claas 30 each KSOFRIDC 5.2 x 15mm Suits Deutz $13 per 100 Early Claas & Laverda Order No. Rivets Comb Front Suits 2 Single Point Sections KSCFRIVT 13mm x 4.7mm for MF & NH $7 per 100 KSCFRIVS 9mm x 4.7mm for International $7 per 100 Suits Double Cut Sections KSCFRIV1 11mm x 5.2mm $10 per 100 KSCFRIV2 12mm x 5.2mm $10 per 100 Head Rivet Double Cut Sections KSCFHD16 16mm x 5.2mm $4 per 25 KSCFHD18 18mm x 5.2mm $4 per 25 Knife Guard Shims Order No. Price SHIM-1 Knife Guard Shim 1mm thick $1.35 SHIM-2 Knife Guard Shim 2mm thick $1.45 SHIM-3 Knife Guard Shim 3mm thick $1.55 Punched Angle Bar Available with 3/8 or 7/16 Square Holes Knifehead Bolts Knife Guard Bar Order No. KSKGCB Order No. Price includes nut Price Price Price $13 per foot Price KSBNVER16 5 /8 (16mm) 85 ea KSBNVER25 1 (25mm) $1 ea Order No. Price KSBNHX32 Hex Head 1 1 /4 x 1 /4 suits Agco $1.20 ea KSBNBH25 1 x 1 /4 suits Inter 810 Knifehead 80 ea KSBNJD25 25mm x 6mm (1 long) $1 ea KSBNHB32 32mm x 6mm suits Honeybee $1.00 ea Order No. SPECIAL BOLT and NUT Suits Overlap on New Holland 971, 806 Fronts and Hay Bine Knives Order No. Price KSBNNHCTR Cuphead Knife Section Bolts & Nuts Suits Laminated Knife 1997 and earlier Tension INCH Pounds John Deere Draper Front Bolts & Nuts Suits All JOHN DEERE Draper Fronts and 600 Series Rigid Fronts 6mm diameter 80 ea Price includes nut Order No. Price KSBNJD16 For attachment of knife section 5 /8 (16mm) 65 ea KSBNJD25 For attachment of knifehead & joiner strip 1 (25mm) $1 ea KSCN6 Stainless Steel lok nut suits reinforcing strip 20 ea KSBNJDHX Allen Key Screw & Nut suits overlap $1.00 Suits Honeybee, New Holland & Midwest Belt Fronts 6mm diameter Order No. Splined Knife Section Bolts & Nuts Suits Nearly all older Rigid Fronts and Macdon and Case-IH Draper Fronts Price KSBNSP16 For attachment of knife section 5 /8 (16mm) 45 ea KSBNSP25 For attachment of knifehead 1 (25mm) 50 ea KSBNSP32 For attachment of knifehead 1 1 /4 (32mm) 65 ea KSBNSP /4 Diameter suits Agco 5 /8 (16mm) 60 ea Honeybee & Midwest Bolts & Nuts Price includes nut Price includes nut Price KSBNHB16 For attachment of knife section (16mm) 80 ea KSBNHB32 For attachment of knife head (32mm) $1.00 ea KSCN6 Stainless Steel lok nut suits reinforcing strip 20 ea KSBNHBT20 T20 Torx Screw & Nut suits Overlap 70 ea KSBNT20K T20 Torx Key suits Torx Screws $6.00 ea Price includes nut Price includes nut Order No. Price KSBNCH16 For attachment of knife section 5 /8 (16mm) 50 ea KSBNCH25 For attachment of knifehead 1 (25mm) 60 ea KSBNCH32 For attachment of knifehead 1 1 /4 (32mm) 75 ea 52 Prices exclude GST (08)

55 Knifeheads Hay and Harvest Order No. Description Oem Part No. Price LKHAC N Series 1 & 2 Left Side & L2, L3 - $80 LKHACN3 Agco/Allis N Series 3 prior S/No bearing included - $230 LKHACR Late N & R Models No bearing needed $120 LKH , complete with block $250 LKHNH , 2020 $200 LKHC-IH Case-IH 810 Series Fronts bearing included $200 LKHBRG1 810 Bearing Only $58 ea LKHHS ft Mower Conditioner $90 LKHHS Most Hesston PT10, PT12, MF54, 600, 1014, 520, 620, , Case 8350 $320 Hesston LKHHS1 1170, 8400 $ Honeybee and New Holland Belt Front Left Hand End with SCH Guards $ Honeybee and New Holland Belt Front Right Hand End with SCH Guards $ Honeybee Knifehead Left Hand - Honeybee/New Holland (with Crary 7228 Guards) $ Knifehead Right Hand - Honeybee/New Holland (with Crary 7228 Guards) $ Nylon Ring Knifehead $15 LKHJD 200 Series, 900 Series Rigid Fronts Heavy Duty Version AH89498 $170 LKHJD600D John Deere 600 Series Belt Front Left and Right AH $200 LKHJD900D 900 Series Belt Front AH $200 LKHMF 550, 750, 760, 850, 860 head with bearing not including strap $130 Massey LKHMFS 750, to 24ft head with bearing and strap included $300 Ferguson LKHMF1 850, to 30ft head with bearing and strap included $300 LKHMAC Macdon , 30 & 36 & Case-IH 1040 Fronts (Macdon Part 37835) $240 LKHPIN1 Pin, Bearing and Seal suits Macdon 960, 962, 972, 973, D60, 1040, 1042, 1052 $70 Macdon LKHBRG2 Bearing suits Macdon Knifehead $45 LKHSEAL1 Seal suits Macdon Knifehead $8 LKHNHTR 705, 960 Front 22ft & 25ft complete head (No Bush) $190 LKHNH , 973, 71C, 73C including Bearing (long bar flush with end of bush) $200 LKHNHM Hay Bine including Bush $125 LKHNHM469 A 469 Hay Bine including Bush (long bar partway up side of bush) $150 New Holland LKHNHM Hay Bine including Bush $165 LKHNH469B Bush suits 469 Knifehead $45 LKHNH489B Bearing suits 489 Knifehead and 971 Knifehead $70 LKHNHM Hay Bine including Bush $110 LKHNHM499L 499 Hay Bine Left Hand Knife including Bush $95 LKHNHM499R 499 Hay Bine Right Hand Knife including Bush $95 LKHVER Suits Versatile Swather including Bushing $100 Versatile LKHVERB Bush suits Versatile Knifehead SW1740 $40 MWKHLH3 Knifehead Left Hand Suit 3 Single Pt Knife Sections $360 MWKHRH3 Mid West Knifehead Right Hand Suit 3 Single Pt Knife Sections $360 MWKHLH4 Knifehead Left Hand Suit 4 Doublecut Knife Sections $360 MWKHRH4 Knifehead Right Hand Suit 4 Doublecut Knife Sections $360 Hold Down Clips LHAHDCLP LHAHDCV LEHAHDCL LHNH4577 LHNH0787 LHNH2342 LHNH2992 Std Hold Down Clip Versatile Swathers Extra High Hold Down Clip Hold Down Clip - Suit NH840CD Hold Down Clip - Suit LHNH4577 Bolt & Nut suit LHNH2134, 4577 Plate Adjuster suit LHNH2134, 4577 $5 ea $8 ea $8 ea $10 ea $6 ea $1.20 ea $14 ea Arm Only Hold Downs suits Honeybee Belt Fronts Front Wear Pad Rear Wear Pad Order: LHAHDCS1 Hold Down Clip suits 3 /8 $24 LHAHDCS2 Hold Down Clip suits 7 /16 $24 LHAHDA Arm Only $9 LHAHDP Front Wear Pad $2.50 LHAHDPR Rear Wear Pad $2.50 LHAHHBR Hold Down Roller $24 LHAHHBRT Hold Down Roller $24 LHAHHBRO Hold Down Roller $24 Hold Down Roller LHNH2134 KSWEARST Hold Down Clip - Suit NH840CD - Centre Wear Strip with Hardened Edge $16 ea $5 ea Spring Loaded Hold Down Hold Down Roller Bottom Hold Down Roller Top (08) Prices exclude GST 53

56 Header Reel Bats 150 mm (6") 280 mm (9") Massey Ferguson New Holland 184 mm (7 1/ 4") John Deere Case-IH 1010 New Holland Macdon 280 mm (11") Agco/Allis Order No. Size Model Application Price (Set of 5) Per Set } } HRB x 24ft $850 Massey Ferguson HRB x 30ft $1060 HRB / 4 x 22ft John Deere 200 & 900 fronts $825 HRB / 4 x 24ft New Holland 971, 71C, 73C fronts $930 HRB / 4 x 25ft Case-IH 1010 & 1020 fronts $960 HRB / 4 x 30ft International 810 fronts $1140 HRB / 4 x 18ft Case-IH & Macdon Belt Fronts 1040, 1042, 36ft, 2 sets required $680 HRB x 30ft New Holland 705, 805, 806 fronts $1300 HRB x 30ft Agco/Allis $1590 Take the Rattle Out of Your Reel Made From Galvanised Steel Full Length One Piece Makes The Reel More Stable 2-3mm n Bolts clamp Reel Bat and Tension it up because edges are made lower than pan section. Eliminates Rattle & Vibration which cause fractures. Individual Bats Available Lentil Lifter Adjustable Lentil Lifter Order No. Model Application Price CL1610 All makes and models includes bracket $26 54 Prices exclude GST (08)

57 Croplifters Fits all Open and Belt Fronts for Canola Field Peas & downed crops Double Thickness We recommend one croplifter per foot across the front. Heavy duty version now available with extra wear plate Shoe section made from high-grade spring steel Specially shaped & tapered top section to lift crop with minimum damage Unique patented height & length adjuster. Also allows some side movement Order No. Model Application Description Price Std. Heavy Duty Agco/Allis CROPLIFD 1 L & N & R Series Rigid Fronts Deluxe Croplifter with saddle (60mm high) and 2 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 CROPLIFD 5 R Series Draper Fronts Deluxe Croplifter with saddle (75mm high) and 4 x 3 / 8 HT bolt/nut $43 $48 Case-IH CROPLIFD 1 International 810 Fronts Deluxe Croplifter with saddle (60mm high) on 1420, 1440, 1460, 1480 Axial Flow and 2 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 CROPLIFD 3 Case-IH 1010, 1020 Fronts Deluxe Croplifter with saddle (75mm high) Macdon and Case-IH Belt Fronts and 2 1 / 2 x 7 / 16 HT bolt/nut to attach croplifter $43 $48 Advise if Hex Heads or Cuphead Bolts attaching Knife Guards CROPLIFD Rigid Front Deluxe Croplifter with saddle (75mm high) and 2 x 7 / 16 HT bolt/nut to attach croplifter $43 $48 John Deere CROPLIFD 1 All 200 & 900 Series Fronts Deluxe Croplifter with saddle (60mm high) and 2 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 CROPLIFD 6 Draper Fronts 930D, 936D, 635D, 640D Deluxe Croplifter with saddle (75mm high) and 2 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 Massey Ferguson CROPLIFD 1 All Fronts 20ft to 30ft Deluxe Croplifter with saddle (60mm high) and 2 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 New Holland CROPLIFD 1 NH 705, 805 & 806 Fronts Deluxe Croplifter with saddle (60mm high) and 2 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 CROPLIFD 2 971, 973, 71C, 73C Deluxe Croplifter with saddle (60 mm high) and 2 x 7 / 16 HT bolt/nut to attach croplifter $43 $48 Honeybee/NH CROPLIFD 4 Honeybee and New Holland Deluxe Croplifter with saddle (110mm high) Belt Fronts with factory lift kit and 3 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 Macdon/Case-Ih CROPLIFD 3 Macdon and Case-IH Deluxe Croplifter with saddle (75mm high) Belt Fronts with Lift Kit and 2 1 / 2 x 7 / 16 HT bolt/nut to attach croplifter $43 $48 Advise if Hex Heads or Cuphead Bolts attaching Knife Guards Midwest CROPLIFD 7 Midwest Belt Fronts Deluxe Croplifter with saddle (60mm high) Belt Fronts and 2 x 3 / 8 HT bolt/nut to attach croplifter $43 $48 All Brands Spare Parts CROPLFNS All brands replacement main croplifter section NB: Saddle excluded. $31 $37 CLSSTD Agco, Case-IH, JD Rigid, MF, Midwest, NH Croplifter Saddle 60mm High $11 CLS1010 CIH, Macdon, JD Draper Croplifter Saddle 75mm High $11 CLSHBEE Honeybee Croplifter Saddle 110mm High $11 (08) Prices exclude GST 55

58 Canola Vertical Knife PROFIX Top Quality European Production Hydraulic Drive Unit Fits to any Swather or Harvester Front A clean vertical cut in your Canola will reduce losses, prevent radish wrapping and let you maximise the yield of this valuable crop. The unit normally drives from the Return Line of the Hydraulic Reel Drive, or if fitted to a PTO Swather then directly off the Tractor Hydraulics. We have a simple kit with a flow control valve and associated hoses if required. features: Mechanical Simplicity High Torque Hydraulic Motor Easy Height Adjustment No Greasing Required Parts & Accessories available for Sabre Knives Code Description Price ZRT135-HY-R Vertical Canola Knife Right Hand $2000 ZRT135-HY-L Vertical Canola Knife Left Hand $2000 SABREVKFLOW Flow Control Valve suits Knife $325 SABREHOSE Hose Kit to plumb valve to motor (not long hoses to tractor/headers) $390 Case-IH Rotor Auger Conversion Improves feeding into rotor and takes away feeder house rumble. Easy installation bolts to existing Rotor with no welding or cutting. Unit comes balanced with only minimal static rotor rebalancing required. Flighting is 13mm (1/2 inch) thick material. Order No. Model Application Item Price ROT-AFX Series to 2366 Axceller Kit $2600 ROT-AFX Series 1480 to 2388 Axceller Kit $ Prices exclude GST (08)

59 SCH Knife Drives For Swather or Header Conversions Belt or Hydraulic Drive Top Quality German Manufacture True straight line drive from the planetary gear drive system. This system is in rotation all the time. There are no dead spots like wobble or crank drives where arms or levers have to stop twice per revolution to change direction SCH Pro-drive $2400 Vertical Pulley Type (Pulley not inc.) Universal Mount Plate $95 Basic Plate Requires adaption Pulley to suit Vertical Pro-Drive $ mm diameter Pulley to suit Vertical Pro-Drive $ mm diameter Pulley to suit Vertical Pro-Drive $ mm diameter Pulley to suit Vertical Pro-Drive $ mm diameter SCH Pro-drive $2400 Hydraulic or Horizontal Pulley Type (Not including Motor or Pulley) Clamp Ring $70 For Knifehead Knifehead Bar $85 (Drilled as required) Knifehead Left Hand $240 Honeybee/New Holland Original Part: NH With SCH Knife Guards: HB Knifehead Right Hand $240 Honeybee/New Holland Original Part: NH With SCH Knife Guards: HB Adjustable Pulley $300 Suits Horizontal Pro-Drive Fixed Adaptor $110 Suits Pro-Drive Hydraulic drive 1 Bore Fixed Adaptor $110 Suits Pro-Drive Hydraulic drive 1 1 / Knifehead Left Hand $240 Honeybee/New Holland With Crary 7228 Guards Knifehead Right Hand $240 Honeybee/New Holland With Crary 7228 Guards HMOMP100 Hydraulic Motor $678 With 1 Drive shaft - suits Pro-Drive & fixed adaptor cc/RPM HMOMS100 Hydraulic Motor $1179 With 1 1 /4 Driveshaft suits Pro-Drive & fixed adaptor cc/RPM as used on Honeybee/New Holland Nylon Ring $14 Knifehead Knifehead Bearing with Plate $140 Honeybee & New Holland Bottom Drive Bearing Assembly $260 With Nylon Ring and Claw Hydraulic Motor Mount Kit $265 Honeybee/New Holland and Univeral Bottom Drive Bearing Assembly $280 JD 900 Draper Mount Plate $750 Suits Case-IH 1010 Rigid Front Mount Plate $650 Suits John Deere 900 Rigid Front Bottom Drive Bearing Assembly $240 Late 900 and all 600 JD Draper (08) Prices exclude GST 57

60 Vee & Flat Idler Pulleys DonDye pressed steel pulleys and idlers are renowned for their quality and are used by many original equipment manufacturers. Fitted with the highest quality pre-lubricated ball bearings no maintenance is required. Adaptor bushes available to suit different bolt sizes Made to take 1/2, 5/8 or 3/4 Bolt for centre mount Order Outside Belt Bore Bearings Price No. Diameter Width ABFI mm 3 / 4 19mm 5 / 8 Single Row $52 ABFI / 4 121mm 3 / 4 19mm 5 / 8 Single Row $51 BCFI / 4 121mm mm 5 / 8 Single Row $50 BCFI / 4 146mm mm 5 / 8 Single Row $51 26FI / 4 146mm 1 5 / mm 5 / 8 Single Row $61 32FI / 4 146mm mm 5 / 8 Single Row $76 BCFI / 4 171mm mm 5 / 8 Single Row $60 26FI / 4 171mm 1 5 / mm 5 / 8 Single Row $78 BCFI / 4 197mm mm 5 / 8 Single Row $70 BCFI / 4 222mm mm 5 / 8 Single Row $80 DFI mm 1 1 / mm 5 / 8 Single Row $86 32FI mm mm 5 / 8 Single Row $86 BVI mm V-Idler Single Row $ / 4 146mm mm Fit bushes to suit 1 / 2, 5 / 8 or 3 / 4 Double Row $ / 4 171mm 1 5 / mm Fit bushes to suit 1 / 2, 5 / 8 or 3 / 4 Double Row $ / 4 171mm mm Fit bushes to suit 1 / 2, 5 / 8 or 3 / 4 Double Row $ mm 1 1 / mm Fit bushes to suit 1 / 2, 5 / 8 or 3 / 4 Double Row $ mm mm Fit bushes to suit 1 / 2, 5 / 8 or 3 / 4 Double Row $ mm 2 5 / mm Fit bushes to suit 1 / 2, 5 / 8 or 3 / 4 Double Row $ mm 3 1 / mm Fit bushes to suit 1 / 2, 5 / 8 or 3 / 4 Double Row $140 FN108 - Bush 1 / 2 $8 FN110 - Bush 5 / 8 $8 FN112 - Bush 3 / 4 $8 PTO Shafts & Yokes Case-IH 1010 Fronts Order No. Item Application Price PTOYOKE1 1 1 / 8 Hex Bore Yoke Quick Release CaseIH 1010 Front $ Series small type Drive from Feeder House to Front PTOYOKE2 1 1 / 8 Hex Bore Yoke Clamp Type CaseIH 1010 Front $ Series small type Drive from Feeder House to Front PTOYOKE5 1 1 / 8 Hex Bore Yoke Quick Release $ Series large type PTOYOKE6 1 1 / 8 Hex Bore Yoke Clamp Type $ Series large type PTOSH1 1.0 metre Closed Length PTO Drive Shaft with $390 2 x 1 1 / 8 Hex Bore Quick Release Yokes 421 Series PTOSH2 1.0 metre Closed Length PTO Drive Shaft with Case-IH 1010 Fronts $450 2 x 1 1 / 8 Hex Bore Quick Release Yokes 221 Series Many other shafts available please enquire fitted with 6, 20 or 21 spline yokes 58 Prices exclude GST (08)

61 Roller Chain We Sell & Recommend Features Include: Quad rivetted pins for sideplate security Extra heat treatment of pin for longer chain life Get AGRI-TUFF Performance!! Drawing heavily on 80 years of design experience and over 20 years of agriculture experience worldwide, TSUBAKI has developed innovative roller chain AGRI-TUFF, especially designed for agriculture applications. Unique new design and new materials improve the reliability and life of your agricultural chain drive. Order Single Pitch Description Buy Code or Duplex Quantity AT40-1 Single 1 / 2 Single Row Chain Box of 10ft AT40-1CL Single 1 / 2 Conn Link Single Each AT40-10L Single 1 / 2 Offset Link Single Each AT50-1 Single 5 / 8 Single Row Chain Box of 10ft AT50-2 Duplex 5 / 8 Double Row Chain Box of 10ft AT50-1CL Single 5 / 8 Conn Link Single Each AT50-10L Single 5 / 8 Offset Link Single Each AT50-2CL Duplex 5 / 8 Conn Link Double Each AT50-20L Duplex 5 / 8 Offset Link Double Each AT60-1 Single 3 / 4 Single Row Chain Box of 10ft AT60-2 Duplex 3 / 4 Double Row Chain Box of 10ft AT60-1CL Single 3 / 4 Conn Link Single Each AT60-10L Single 3 / 4 Offset Link Single Each AT60-2CL Duplex 3 / 4 Conn Link Double Each AT60-20L Duplex 3 / 4 Offset Link Double Each AT60-1HD Single 3 / 4 Single Row Chain Heavy Duty (JD s) Box of 10ft AT60-1CLHD Single 3 / 4 Conn Link Single Heavy Duty Each AT60-10LHD Single 3 / 4 Offset Link Single Heavy Duty Each AT80-1 Single 1 Single Row Chain Box of 10ft AT80-1CL Single 1 Conn Link Single Each AT80-10L Single 1 Offset Link Single Each ALL 10ft BOXES INCLUDE ONE CONN LINK New Holland NHRC60-2 Duplex 3 / 4 Rotor Coupling Chain Kit (one per harvester) - suits all TR s up to and including TR98, 19 Links and one Conn Link NHGB50-2 Duplex 5 / 8 Gear Box Coupler Chain Kit (two per harvester) - suits all TR s up to and including TR98, 23 Links and one Conn Link NHRC Duplex 3 / 4 Rotor Coupling Chain (one per harvester) - suits TR99 25 Links and One Conn Link NHGB Duplex 3 / 4 Gear Box Couple Chain Kit (two per harvester) - suits TR99 19 Links and One Conn Link Cutting Height Gauge Know your cutting height at all times Installs in the cab on window Simple no electrics Highly visible day or night Order Code lokkhg $190 (08) Prices exclude GST 59

62 Electric Linear Acuators Electric Linear Actuators 12 or 24 Volt for a variety of uses around the farm. Air seeders Control of seed and fertiliser. Chute doors Trucks, silos, sheep feeders and fertiliser spreaders. Available in many sizes, load capacities and stroke lengths. We recommend Warner Electric Linear Actuators USA manufacture. Electrak 1 Electrak 2 Electrak 10 Electrak 100 E050 E150 Input 12volt 12volt 12volt 24volt 12volt 12volt Voltage 24volt 24volt 24volt 24volt Load 25 on 12volt 250 on 12volt 500 on 12volt 50 on 12volt 225 on 12volt capacity (lbs.) 75 on 24volt 1000 on 24volt 1000 on 24volt 112 on 24volt 450 on 24volt Stroke length 1, 2, 4, 6 4, 8, 12, 4, 8, 12, 4, 8, 12, 4, 6, 8 4, 8, 12 (inches) 18, 24 18, 24 18, 24 Type of Acme Acme Ball bearing Ball bearing Acme Acme lead screw screw screw screw screw screw screw Duty cycle, full load 25% 25% 25% 25% 25% 25% Load limiting No Yes Yes Yes Yes No clutch Limit Switches Fixed No No Adjustable Fixed Adjustable Feedback No No No Potentiometer No No Motor overload protection Yes Yes Yes Yes Yes Yes Price $540 $740 P.O.A. P.O.A. $390 $ Prices exclude GST (08)

63 Hydraulic Multi-Coupler John Deere LAJ Multi Coupler Block $135 No Couplers Suits John Deere STS Models LAJ Coupler - Suits Reel Lift $132 Green Marker John Deere STS Models (Snap Ring included) LAJ Multi Coupler Block $740 All Couplers Fitted Suits Reel For & Aft, Reel Drive, Reel Lift John Deere STS Models Or choose LAN Block and any of the following couplers... LAJ Coupler - Suits Reel For & Aft $115 (2 Required) Blue Marker John Deere STS Models (Snap Ring included) LAN204828S Storage Bracket $80 for Multi-Coupler Block (Hardware included) LAN Coupler Seal Repair Kit $22 Suits 3/8 Coupler LAN Coupler Seal Repair Kit $22 Suits 1/2 Coupler LAJ Coupler - Suits Reel Drive (Pressure) $132 Yellow Marker John Deere STS Models (Snap Ring included) LANEC550 Dummy Plug $65 Suits John Deere 50 Series - STS Required to complete circuit on Reel Speed LAJ Coupler - Suits Reel Drive (Return) $132 Red Marker John Deere STS Models (Snap Ring included) LANEC560 Dummy Plug $175 Includes Snap Ring Suits John Deere 60 Series - STS Required to complete circuit on Reel Speed Case-IH and New Holland LAN3P5065-5EMC Hydraulic Coupler Block $510 LAN2P5065-2AFC Hydraulic Coupler Block - 2 Port $290 Suits Header Front Side Case-IH 8010 onwards, New Holland CR & CX Series Suits Harvester side of Case-IH 8010 onwards, New Holland CR & CX Series LAN2P5065-5AFC Hydraulic Coupler Block - 5 Port $495 Suits Header Front Side Case-IH 8010 onwards, New Holland CR & CX Series Example: Use to make Canola Pick Up Fronts Easy to Attach. (08) Prices exclude GST 61

64 Belts Heavy Duty Belts with Kevlar fibres for Strength and Longevity Order No. Model Application Description Price Agco/Allis HB A75, A76 Pump Drive $150 HB101102M1 A65, A75 Unloader Drive $150 HB A65, A66, A75, A76 Main Countershaft $166 HB R55, R65, R75 Bin Unloader Drive Left Hand $53 HB R62, R72, S67, S77 Rear Feed Conveyor $100 HB R72 above S/No 79001, Air Cond Compressor Drive $14 S67 above S/No BHTV6500, 51 1/4 Length S77 above S/No BHTV7500 HB R40, R42, R50, R52, R62, R65, R72, R75 Straw Spreader Drive $65 HB R62 above S/No 63000, Jackshaft Drive Right Hand $99 R72 above S/No 73000, S67, S77 Case-IH HB244420A4 1440, 1460, 1640, 1660, 1644, 1666, Rotor Drive $ , 2166, 2344, 2366 HB244422A4 1480, 1688, 2188 Rotor Drive $475 HB244423A4 1680, 2388 Rotor Drive $520 HB191241C1 1420, 1440, 1460, 1620, 1640, 1660 Separator Drive $325 HB , 6088, 7088 Cleaning System Drive (With Beater) $225 HB191305C1 1440, 1460, 1640, 1660, 1644, 1666, Fan, Jackshaft & Drive $ , 2166, 2344, 2366 before S/No HB301146A Cleaning Fan Drive $65 HB above S/No 23400, 1480 above S/No 24000, Straw Spreader Drive $ , 1660, 1666, 1680, 1688, 2188, 2388, (Replaces C1) 2377, 2588, 2344, 2366 HB192738C1 1440, 1460, 1640, 1660, 1644, 1666, 2144, Feeder Drive $ , 2344, 2366 (All without Rock Trap) HB194528C1 1480, 1680, 1688, 2188, 2377, 2388, 2577, 2588 Feeder Drive $295 HB C1 1688, 2188, 2388 Separator Drive $250 HB393750A1 2166, 2344, 2366, 2388 Feeder Jackshaft Drive $325 All with 60 Feeder House HB191290C1 1440, 1460, 1640, 1660, 2144, 2166, 2344, 2366 Grain Tank Unloader Drive $85 HB C1 1644, 1666, 1688, 2144, 2166, 2188, 2344, Cleaning Fan Drive $ before S/No , 2388 before S/No HB195396C2 1440, 1450, 1480, 1640, 1660, 1680 Cleaning Fan Drive $76 HB188213C1 1480, 1680, 1688, 2188 Fan Jackshaft Drive $62 HB C1 1680, 1688, 2188, 2377, 2388, 2577, 2588 Straw Chopper Drive $125 HB396829R1 1640, 1660, 1666, 1688, 2166, 2188, 2366, 2388 Air Cond Compressor Drive $17 HB537072R , 1660, 1680 Fan, Alternator Water Pump $60 HB124573A1 2188, 2388 before S/No Auxillary Pump Drive $105 HB247428A1 1010, 1020 Knife Drive $80 HBJ , 1688, 2166, 2188 Alternator, Fan & Water Pump $ , 2388 Alternator & Fan hbj & STX Tractors Fan Belt $55 62 Prices exclude GST (08)

65 Belts Order No. Model Application Description Price John Deere HBH STS, 9750STS, 9660STS, Rotor Drive $ STS, 9670STS, S660 HBH STS above S/No , Rotor Drive $ STS, 9870STS, S670, S680, S690 HBH CTS, CTSII, 9400, 9500, 9510, 9600 Cylinder Intermediate Drive (901/8 long) $345 HBH , 9600 above S/No < Reel Pump and Header $ above S/No , 9500 above S/No HBH , 9500, 9510, 9600, CTS, CTSII, Cylinder Drive $252 (Dual and Single Range) HBH , 9500, 9600, cts, ctsii Feeder House Variable Speed $225 HBH , 9500, 9600, cts, ctsii Cooling Fan $18 HBH , 9500, 9510, 9600, CTS, CTSII Shoe, Straw Walker, Conveyor Auger $155 HBH , 9500, 9600, CTS, CTSII Unloading System $95 HBH , 9500, 9600, CTS, CTSII Secondary Counter Shaft $100 HBH , 9500, 9510, 9600, 9610 Feeder Conveyor Drive $80 HBN , 9500, 9600, CTS, CTSII Tailings Auger and Elevator (Lower) $70 HBH , 9750 before S/No Feeder House Drive (Fixed Speed) $140 HBH , 9500, 9600, CTS, CTSII Feeder House Fixed Speed with Reverser $160 HBH STS, 9750STS, 9660STS, 9760STS, Feeder House Drive and Header and Reel Pump - High Capacity $ STS, 9670STS, 9770STS, 9870STS, S660, S670, S680, S690 HBH STS, 9750STS, 9660STS, 9760STS, Right Hand Jackshaft (Front) $ STS, 9670STS, 977STS, 9870TSTS S660, S670, S680, S690 HBH STS, 9750STS, 9660STS, 9760STS, Right Hand Jackshaft (Rear) $ STS, 9670STS, 9770STS, 9870STS S660, S670, S680, S690 HBH above S/No , 9450, 9550, 9650, 9660 Rotary Screen (Screen Side) $38 HBH STS, 9750STS, 9660STS, 9760STS, Tailings Auger and Elevator Drive $ STS, 9670STS, 9770STS, 9870STS S660, S670 HBH STS, 9870STS, S670 Feeder House Belt $275 HB , 9650, 9660, 9750, 9760, 9860, Feed Accelerater $250 Up to Serial Number HB Feeder House $185 New Holland HB TR70 Header Drive Belt $175 HB TR89, TR95, TR96, TR97, TR98 Rotor Vari-Drive $420 HB TR98, TR99 Rotor Drive - Varispeed $545 HB TR70, TR75, TR85, TR86, TR87, TR88 Clean Grain Elevator Drive $55 HB TR89, TR96, TR97, TR98, TR99 Clean Grain Elevator Drive $130 HB , 1545, TR70, TR75, TR85 Grain Elevator and Fan Drive $70 HB TR70, TR75, TR85, TR86, TR87, TR88 Shaker Shoe Drive $175 HB TR89, TR99 Discharge Beater $110 HB Also fits select TJ Ford Tractors Alternator Belt $40 HB TR75, TR85, TR86, TR87, TR88, TR96 Header Drive $290 HB , TR70, TR75, TR85 Auger Drive $52 HB TR86, TR87 Main Hydro Drive $415 HBAM TX68 Feeder Drive $200 HBAM TX68 Separator Drive $120 Massey Ferguson HB227455M1 850, 860, 8570, 8780, 9690, 9790 Jackshaft Spreader & Grain Elevator $60 HB , 9695, 9790, 9795, 9895 Rotary Screen $22 HB W1 8560, 8570, 8780 Return Elevator Drive $31 HB W1 8560, 8570, 8780 Fan Drive - Varispeed $92 HB W1 8560, 8570, 8780 Beater Drive $225 HB , 9690, 9790 Chopper, Secondary $115 (08) Prices exclude GST 63

66 Case-IH Auger Elevator and Grain Tank Parts AIHCC60 Unloading Auger Elbow $1200 Suits 1420 to 2388 inclusive, 2577, 2588 Original Part: A2, Heavy Duty 1 thick ring welded seam HPIHC-9463 Output Shaft Lower Grain Tank $230 Unloading Auger Suits 1640 to 2388 inclusive Original Part: C1 HPIHC-9464 vvv Gear Lower Grain Tank $225 Unloading Auger 21 Teeth 11/2 Bore Suits 1640 to 2388 inclusive Original Part: C1 hpihc-2945 Sprocket Grain Elevator Drive $170 25/30 Teeth 11/4 Bore Suits 2144 to 2388 inclusive Original Part: A1 HPIHC-9462 Lower Grain Tank Auger Input Shaft $229 Suits 1640 to 2388 inclusive Original Part: C1 HPIHC-7260 Upper Unloading Gearbox Pinion $148 Suits 1640 to 2388 inclusive Original Part: C1 HPIHC-7859 Bearing Support Unloading Auger $90 Suits 1644 to 2388 inclusive Original Part: C1 LAIVU-1400D Vertical Unloading Auger $690 with Double Flight 491/₄ long 11/2 Sq. Bottom Hub 13/₈ Round Top Hub Suits 1440, 1460, 1480, 1640, 1660, 1680 Original Part: C2 LAIVU-1640 Vertical Unloading Auger $590 Suits 1640 to 2388 inclusive Splined both ends 50 long Original Part: C2, LAIVU-8010 Vertical Unloading Auger 471/4 long $740 Suits 7010, 8010 Original Part: HPIHC-8307 Vertical Unloading Auger $725 Grain Tank Tube Suits 1440 to 2388 inclusive Original Part: A2, LAIHU Horizontal Unloading Outer Auger $ /₄ long Split suits two piece Has hex end to couple with Front Auger (Total Auger 208 ) Suits 1640 to 2388 inclusive Original Part: A1, A1, LAIHUP-1680 Hex Connector $35 Suits 2 piece Augers 1660 to 2388 inclusive Original Part: A2 LAIHU Horizontal Unloading Inner Auger $ /2 long Split suits two piece (172 or 208 Total) 19 Splined Drive End Suits 1644 to 2388 inclusive Original Part: A2, A1, C2 LAIHU Horizontal Unloading Outer Auger $ /4 long Split suits two piece Has hex end to couple with Front Auger (Total Auger 172 ) Suits 1644 to 2388 inclusive Original Part: C2 HPIHC-7899 Unloading Auger Tube-Rear $ long 12 ID Suits 1640 to 2388 inclusive Original Part: C4 HPIHC-7738 Unloading Auger Tube-Front 90 long $790 Suits 1620 to 2388 inclusive Original Part: C1 HPIHC-5223 Horizontal Unloading Auger $445 Extender 3ft long Suits 7088, 7010, 7120, 8010, 8120, 8230, 9120, 9230, Original Part: LAIC-1640 Clean Grain Auger 681/₄ long $260 7 Od Flight Suits 1640, 1644, 1660, 1666, 2144, 2166, 2366 Original Part: C3 LAIC-1680 Clean Grain Auger 76 long $325 8 Od Flight Suits 1680, 1688 Original Part: C1 LAIC-2188 Clean Grain Auger 13/8 Shaft 76 3/8 long $390 Heavy Duty Suits 2188, 2388 Original Part: A3, LAIC-8010 Clean Grain Auger 1003/8 long $925 Suits 8010, 8120, 9120, Original Part: HPIHC-9374 Clean Grain Auger Trough $375 Suits 1680 to 2588 inclusive Original Part: C1, LAID-2344C Inclined loading Auger 471/₄ long $925 Split flight for monitor Suits 2344, 2366, 2388 with AFS Original Part: A3, A4 LAID-1660 Inclined Loading Auger 471/₄ long $725 No split in Flighting Suits 1660 to 2388 inclusive, 2577, 2588 Original Part: A1, C3, LAID-1644 Loading Auger 811/₄ long $395 Suits 1640, 1660, 1666, 2144, 2166, 2344, 2366 Original Part: C3 LAIR-1440 Return Grain Auger 621/2 long, 1 Shaft $260 Suits 1440, 1460, 1640, 1644, 1660, 1666 Original Part: C1 LAIR-1480 Return Grain Auger 851/2 long, 11/₈ Shaft $350 Suits 1480, 1680, 1688 Original Part: C2 64 Prices exclude GST (08)

67 Case-IH Auger Elevator and Grain Tank Parts continued LAIR-2166 Return Grain Auger 621/2 long $325 Suits 2144, 2166, 2344, 2366 Original Part: A2 LAIR-2188 Return Grain Auger 851/2 long $445 Suits 2188, 2388 Original Part: A2 LAIR-8010 Return Grain Auger 981/4 long $875 Suits 8010, 8120, 9120 Original Part: , LAIB-1440 Auger Grain Tank bottom 110 long $550 2 used per machine Suits 1440 to 2388 inclusive, 2577, 2588 Original Part: 92784C2, LAIB-8010 Auger Grain Tank Front 120 7/8 long $575 Suits 7010, 8010 Original Part: , LAIT-1440 Return Grain Auger Upper Delivery $275 Suits 1440 to 2366 inclusive - 255/8 long Original Part: C1 LAIT-1480 Return Grain Auger Upper Delivery $280 Suits 1480, 1680, 1688, 2188, /8 long Original Part: C1, HPIHC-9229 Auger Grain Bed 783/8 long, 7/8 Hex Shaft $210 Suits 1420 to 2388 inclusive Left Hand Rotation Original Part: C1 HPIHC-8541 Auger Grain Bed 783/8 long, 7/8 Hex Shaft $230 Suits 1420 to 2388 inclusive Right Hand Rotation Original Part: C1 HPIHC-3414 Bearing Block-Wooden Shoe Supply $16 Suits 1660 to 2388 inclusive, 2577, 2588 Original Part: B94626, C2 HPIHC-1677 Bevel Gear Auger Bed 14 Tooth 11/8Hex $40 Suits 1420 to 2388 inclusive Original Part: C1, TLIHC-1660T Grain Tank Loading Tube Upper $195 Suits 1660 to 2588 inclusive Original Part: C3 TLIHC-1660B Grain Tank Loading Tube Bottom $420 Suits 1660 to 2588 inclusive Original Part: C2 TLIHC-16601B Grain Tank Loading Tube Bottom $240 (with Monitor Window) 35 long Suits 2144 to 2588 inclusive Original Part: A2 HPIHC-2475 Unloading Auger Housing Lower $1200 Suits 1420 to 2388 inclusive Original Part: C3 HPIHC-7873 Inner Tube-Unloading Auger $1275 Perforated 90 long 12 Diameter Suits 1620 to 2388 inclusive Original Part: C1 HPIHC-7783 Outer Tube-Unloading Auger $ /2 long Suits 1620 to 2188 inclusive Original Part: C HPIHC-8584 Clean Grain Elevator Boot (Inner) $100 Suits 1680 to 2388 inclusive Original Part: C2 HPIHC-6175 Clean Grain ELevator Boot (Outer) $50 Suits 2188, 2388, 2577, 2588 without Yield Monitor Original Part: A2 HPIHC-3237 Clean Grain ELevator Boot (Outer) $80 Suits 1644 to 2588 inclusive with AFS (Yield Monitor) Original Part: A1 HPIHC-2018 Wooden Chain Tension $10 Block Grain Elevator Drive Suits 1420 to 2588 inclusive Original Part: R1 HPIHC-9247 Clean and Return Grain Elevator $140 Drive Shaft Suits 1480 to 2388 inclusive Original Part: C1 HPIHC-1552E Support Front Grain Elevator Head $60 Suits inclusive, 2577, 2588 Original Part: C2 HPIHC-1097 Cover, Auger Grain Elevator Head $60 Suits inclusive, 2577, 2588 Original Part: C2 HPIHC-1154 Panel Right Hand Grain Elevator Head $70 Suits inclusive Original Part: C1 HPIHC-1458 Plate Right Hand Grain Elevator Head $260 Suits inclusive Original Part: A1 HPIHC-1060 HPIHC-9134 Support Auger Mounting for Grain Elevator Head $110 Suits inclusive, 2577, 2588 Original Part: C1 Support Auger Bearing for Grain Elevator Head $130 Suits inclusive, 2577, 2588 Original Part: C1 HPIHC-1095 Panel Right Hand Grain Elevator Head $65 Suits inclusive, 2577, 2588 Original Part: C1 HPIHC-1497 Panel Left Hand Grain Elevator Head $90 Suits inclusive, 2577, 2588 Original Part: C1 HPIHC-9940 Cover Rear Grain Elevator Head $80 Suits inclusive, 2577, 2588 Original Part: C1 HPIHC-1284 Plate Grain Elevator Head $90 Suits inclusive, 2577, 2588 Original Part: HPIHC-1550 Panel Rear Support Grain Elevator Head $65 Suits inclusive, 2577, 2588 Original Part: C2 (08) Prices exclude GST 65

68 Case-IH Auger Elevator and Grain Tank Parts continued HPIHC-7439 Cover Front Grain Elevator Boot $75 Suits inclusive, 2577, 2588 Original Part: C1 HPIHC-7276 Clean Grain Elevator Door $95 Suits inclusive Original Part: C1 HPIHC-7430 Clean Grain Elevator Door $100 Suits inclusive, 2577, 2588 Original Part: C1 HPIHC-1114 Shaft Upper Unloading Auger Gearbox $370 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-3219 Shaft Lower Unloading Auger Gearbox $ /16 long, 8/21 Teeth Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-5830 Shaft Unloading Drive $90 Suits 7010, 7120, 8010, 8120, 9120 Original Part: , HPIHC-0515 Boot Lower Clean Grain Elevator Head $475 Suits 7010, 7120, 8010, 8120, 9120 Original Part: , HPIHC-8178 Shaft Grain Elevator Head 1513/16 long $85 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-6252 Boot Tailing Elevator $290 Suits 2344, 2366, 2377, 2388, 2577, 2588 Original Part: HPIHC-5185 Shaft Clean Grain and Tailings $185 Elevator 267/8 long Suits 2144, 2166, 2344, 2366 Original Part: A1 Chaffer & Sieve Area Parts HPIHC-1723 Arm Hanger (Front) Shoe $140 Suits 1640 to 2388 inclusive, 2588, 7088 Original Part: C1, HPIHC-1724 Arm Hanger (Rear) Chaffer $170 Suits 1640 to 2388 inclusive, 2588, 7088 Original Part: C1, HPIHC-0613 Shaft Shaker Shoe Drive $690 Suits 8010, 8010AFX, 8120, 9120 Original Part: HPIHC-7184 Shaft Shaker Shoe Drive $45 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-9072 Rubber Bush Upper Shoe Drive $65 Suits 7010, 7120, 8120, 9120 Original Part: , , , , HPIHC-9251 Pitman Assembly Shaker Shaft $220 Suits 1640 to 2388 inclusive Original Part: C1, HPIHC-2616 Shaft Shaker Drive/Auger Drive $520 Suits 1688, 2188, 2388, 2377, 2588 Original Part: C2 HPIHC-2574 Cam Shaker Shaft - Right Hand $230 Suits 1644 to 2388 inclusive Original Part: , C1, C1 HPIHC-2561 Arm Lower Shaker Shoe $90 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-4041 Arm Upper Shaker Shoe $80 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-4571 Arm Upper Shoe Drive Left hand $210 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-4573 Arm Upper Shoe Drive Right hand $210 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-2651 Bushing Upper Shaker Shoe $8 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-8222 Bushing Upper Shaker Shoe 21mm Hole $4.75 Suits 7010, 7120, 8010, 8120, 9120 Original Part: , HPIHC-9232 Bushing Cleaning Shoe Pivot Frame $13 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-4817 Roller -Cleaning Shoe Pivot Frame $32 Suits 7010, 7120, 8010, 8010AFX, 8120, 9120 Original Part: HPIHC-1928 Shaft - Cleaning Shoe Pivot Frame 89/32 long $80 Suits 7010, 7120, 8010, 8120, 9120 Original Part: , HPIHC-4453 Support - Upper Shoe Drive (RH) $80 Suits 7010 to 9120 Original Part: HPIHC-9900 Support Left Hand Shoe Side $575 Suits inclusive Original Part: C5 NEW HPIHC-9901 Support Right Hand Shoe Side $590 Suits inclusive Original Part: C5 NEW HPIHC-9206 Rail Chaffer Left Hand $400 Suits inclusive Original Part: C1 HPIHC-9207 Rail Chaffer Right Hand $400 Suits inclusive Original Part: C1 HPIHC-2452 Rail Chaffer Left Hand $550 Suits inclusive, 2577, 2588 Original Part: C2 HPIHC-2453 Rail Chaffer Right Hand $550 Suits inclusive, 2577, 2588 Original Part: C2, CBIHC-1644 Chaffer Drive Hanger Bush (Set of 4) $150 Suits 1644, 1666, 1680 after S/No 7060, 1688, 2144, 2166, 2188, 2344, 2366, 2388, 2577, 2588 Original Part: replaces C2, replaces C1 66 Prices exclude GST (08)

69 Case-IH Chaffer & Sieve Area Parts continued CBIHC x4 CBIHC CBIHC1400 x12 x6 Shoe Drive Arm Bush (Set of 4) $90 Suits 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2388 Original Part: replaces c1 Chaffer Drive Arm Bush (Set of 12) $295 Suits 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2388 Original Part: replaces c2 and replaces C1 Chaffer Drive Hanger Arm Bushing (Set of 6) $110 Suits 1440 to 1666 inclusive, 1680 short sieve model Original Part: C1 CBIHC Chaffer Frame Bushing $12 Suits 1420 to 1666 inclusive, 1680 short sieve model Original Part: R91 CBIHC x12 Shoe Sieve Hanger Arm Bushing (Set of 12) $125 Suits 1420 to 1666 inclusive, 1680 short sieve model Original Part: R91 HPIHC-2886 Shaft Beater Drive $800 Suits 8010, 8010AFX, 8120, 9120 Original Part: , HPIHC-4194 Bevel Gear Straw Spreader 14 Tooth 7/8 Hex $35 Suits inclusive, 2577, 2588, 6088, 7088 Original Part: C1, C1 HPIHC-4194B Bearing 7/8 Hex Bore $35 Suits previous item HPIHC-4194 Bevel Gear - Straw Spreader HPIHC-7402 Sprocket Unloader Drive Lower 33/57 tooth $235 Suits inclusive Original Part: C1 HPIHC-9795 Sprocket Driven Unloading Drive 25 Tooth $90 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-7639 Sprocket Idler Unloading Drive 15 Tooth $60 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-9770 Sprocket Unloading Drive 25 Tooth $75 Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-9777 Sprocket Unloading Drive 38 Tooth $85 Suits 7010, 7120, 8010, 8120, 9120 Original Part: Engine Parts TPIHC-243 Water Pump 400 Series Motors $240 Suits 186 Hydro, 1066, 1086, 1460, 1466, 1480, 1486, 1566,1586, 4166, 4186, 5088, 5288 Suits 400 Series Navistar Engine Original Part: C94, C93 TPIHC-780 Water Pump 17mm shaft $150 The hub of the original pump will need to be fitted to this replacement pump. Suits 711, 725 with 310, 358, 358DT Engines Original Part: R93, R92 TPIHC-1263 Water Pump 24mm Shaft $225 Suits 1420, 1620 with D358 Original Part: R94 TPCA-1443 Water Pump $180 Suits 1620, 1640, 1644, 2144, 2344 with 5.9 Litre Engine (Cummins) Original Part: J802970, A77703 TPCA-1444 Water Pump $170 Suits 1660, 1666, 1680, 1688, 2166, 2188, 2366, 2388 with 8.3 Litre Engine (Cummins) Original Part: J802975, A77704 HPIHC-2491 Water Pump $210 Suits 8010, AFX8010, 8120 Original Part: , HPIHC-1179 Radiator $ Row Core 5 Fins/inch Suits 1460, 1480, 1640, 1660 with International Engine Original Part: A HPIHC-1730 Radiator $ Row Core 5 Fins/inch Suits 1640, 1644, 1660, 1666, 1680, , 2144, 2166, 2344 with Cummins Engine, 2188 to Serial No JJCO Original Part: A1, C3 HPIHC-4951 Radiator $ Row Core 5 Fins/inch Suits 2188 above Serial No. JJC , 2366, , 1680 (Not for Cummins Engine) Original Part: A1 HPIHC-5361 Radiator $3800 Suits 2388 above Serial No. JJC Row Core 5 Fins/inch Original Part: A1/A2/A3, A1 & A2 superceded TPIHC-777 Fuel Lift Pump $80 Suits Neuss Engines IH 711, 725 Original Part: R93, R92 TPIHC-1433 Water Manifold $800 Suits 6 Cylinder Neuss Engines 711, 725 Original Part: R1 Engine Output Drive Parts HPIHC-285 Rotor Drive Vari-speed Sheave $600 (Stationary Sheave) Suits 1420 to Also 1620 to Serial No , 1640 to Serial No ,1660 to Serial No & early 1680 Original Part: C2 HIPHC-8848 Rotor Drive Pulley Stationary $580 Suits 1620 to 2388 inclusive Original Part: C1 HIPHC-0054 Rotor Drive Pulley Variable $530 Suits 1640 to 2388 inclusive Original Part: C1 HIPHC-8846 Hub Assembly Rotor Drive Pulley $325 17/64 Bore, 12 Spline Suits 1620 to 2388 inclusive Original Part: C1, C2 (08) Prices exclude GST 67

70 Case-IH Engine Output Drive Parts continued HPIHC-1453 Hub Rotor Drive Pulley $525 Suits 2344, 2366, 2377, Some 2388, 2577, 2588 Original Part: HIPHC-1452 Pulley Separator Drive $625 Suits 1420 to 2388 inclusive 2388 below Serial No Original Part: C2 HPIHC-9419 Hub Separator Drive Shaft $130 Suits 1420 to 2388 inclusive, 2577, 2588 Original Part: C1 HPIHC-287 Main PTO Drive Shaft $450 Suits 1420 to 2188 inclusive Original Part: C1 HPIHC-720 Rebuilt Separator Clutch and Pressure Plate $900 EXCHANGE $200 refundable deposit applies Suits 711, 725 Original Part: Feeder House Parts HPIHC-1440 Top Feeder House Shaft 68 long $260 Suits 1680, 1688, 2188, 2388 Original Part: C4 below serial No. 55C HPIHC-652 Top Feeder House Shaft 573/8 long $220 Suits 1420, 1440, 1460 Original Part: C2 HPIHC-653 Top Feeder House Shaft 65 1 /4 long $190 Suits 1480 (without Rock Trap) Original Part: C1 HPIHC-7208 Feeder House Drum Shaft 45 $135 Suits 1680, 1688, 2188, 2388, 2588 Original Part: C2 HPIHC-0160 Feeder House Shaft 617/8 $275 Suits 1440 to 2366 inclusive Original Part: C3 HPIHC-8907 Top Feeder House Shaft 691/4 $275 Suits 2388 above serial No. JJC , 2377 with Hydraulic Reverser Original Part: A1 HPIHC-6024 Shaft for Feeder Roller 53³/16 $400 Suits 7010 HAJ onwards, 7120, 8010 HAJ onwards, 8120 Original Part: HPIHC-1931 Shaft Feeder House Lower 70¹/16 $400 Suits 2144, 2344, 2166, 2366, 2188 JJC onwards, 2388 up to JJC Original Part: A3 HPIHC-8967 Pulley, Jackshaft Drive, Feeder House $350 Splined Centre Suits 2166, 2344, 2366, 2188, 2388 Original Part: C2 HPIHC-8288 Feeder House Drum Arm Right Hand $ /8 long Suits 1644 to 2388 inclusive Original Part: C3 HPIHC-8287 Feeder House Drum Arm Left Hand $195 Suits 1644 to 2388 inclusive Original Part: C3 HPIHC-4574 Feeder House Bottom 60 $750 Suits 1680, 1688, 2188, 2388, 2577, 2588 Original Part: C2 HPIHC-4576 Feeder House Bottom 47 $600 Suits 1420 to 1660 inclusive Original Part: HPIHC-4578 Feeder House Bottom /2 $570 Suits 1440 to 2366 inclusive Original Part: C2 HPIHC-2449 Arm for Feeder Roller $160 Suits 7010 up to HAJ up to HAJ202001, AFX8010 Original Part: , , , HPIHC-1396 Shaft Input, Feeder Drive Forward 1415/16 $425 10/42 Spline Suits 1440 to 2388 inclusive Original Part: C1 HPIHC-5927 Feeder Reverser - Electric $1000 Suits 1640 to 2388 inclusive Original Part: C93 Hydraulic Parts HPIHC-1176 Hydraulic Cylinder Auger unloading $450 Suits 1420, 1440, 1460, 1480 Original Part: C93 HPIHC-2488 Hydraulic Cylinder Auger unloading $695 Suits 1640, 1660, 1680, 1644, 1666, 1688 Original Part: C92 HPIHC-7241 Hydraulic Cylinder Auger unloading $1000 Suits 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588 Original Part: , HPIHC-6482E Hub Auxillary Hydraulic Pump Drive $575 Extended Spline & Greasable Suits 1420 to 2388 inclusive Original Part: C3 HPIHC-6482 Hub Auxillary Hydraulic Pump Drive $475 Greasable Standard Spline Suits 1420 to 2388 inclusive Original Part: C3 HPIHC-0136 Hydrostat Pump Shaft $450 Suits Before Serial N o Original Part: C1 Retractable Fingers HPJD-869 Retractable Finger Guide $4 Suits 810 Front HPIHC-1883 Retractable Finger Guide $7 Suits 1010, 1020, 1042, 1052, 2010, 2020, 2052, 2062 Original Part: , C2 HPIHC-1884 Retractable Finger $13 Suits 1010, 1020 Fronts Original Part: C1 HPIHC-1885 Finger Holder $8 Suits 1010, 1020 Fronts Original Part: C1 68 Prices exclude GST (08)

71 Case-IH Poly Retractable Fingers (Insurance Against Serious Damage) Replace Steel Retractable Fingers Strong & Durable Made from tough fibreglass with outer coating of hardwearing plastic Will not damage your concave, drumbars or other parts of the header like steel fingers. Retract 2F Finger only All 1010 Fronts $12 Retract 2 Guide & Attaching Screws All 1010 Fronts $4 Rotor Parts CCIHC-20W Rotor Cone Heavy Duty (including Vanes) $1800 Suits 1420, 1620 (not European Models) Original Part: C1 CCIHC-19W Rotor Cone Heavy Duty (including Vanes) $2000 Suits 1440, 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2366 Original Part: A2, C2 CCIHC-84W Rotor Cone Heavy Duty (including Vanes) $2150 Suits 1480, 1680, 1688, 2188, 2388 Original Part: A1, C2 CCIHC-8010W Rotor Cone (including Vanes) $2500 Suits 7010, 7120, 8010, 8120 Original Part: Vanes-20W Complete Vane Set (Also Fit Original Cone) $300 Suits 1420, 1620 Vanes-19W Complete Vane Set (Also Fit Original Cone) $295 Suits 1440, 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2366 Original Part: A1 Vanes-84W Complete Vane Set (Also Fit Original Cone) $430 Suits1480, 1680, 1688, 2188, 2388, 2577, 2588 Original Part: A2 CPVK Vane Transport Vane Kit 3/16 $200 Complete with hardware Kit Suits 1420, 1620 CPVK Vane Transport Vane Kit 3/16 $290 Complete with hardware Kit Suits 1440, 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2366 Original Part: CPVK Vane Transport Vane Kit 3/16 $400 Complete with hardware Kit Suits 1680 to 2388 inclusive, 2577, 2588 Original Part: A2 HPIHC-4489 Hub Rotor Drive $ /4 long, 20 teeth, 13 spline Suits most 1620 to 2388 (check size) Original Part: C2, C1, C1 HPIHC-5453 Rubber Insulator Rotor Drive Hub $17 Suits 1640 to 2588 inclusive Original Part: C1 HPIHC-3439 Rotor Front Bearing Housing $390 Suits 1420 to 2388 inclusive, 2388 up to Serial No and above Serial No Original Part: A3, HPIHC-1545 Rotor Front Shaft $475 Suits 1420 to 2388 inclusive, 2388 up to Serial No and above Serial No Original Part: C2 HPIHC-5307 Rotor Drive Coupling $370 Suits 1420 to 2388 inclusive 17 spline Original Part: C1 HPIHC-1542 Coupling Splined U Joint Separator Drive $190 Suits inclusive Original Part: C2 HPIHC-1748 Separator Pulley $340 Driver 143/4 OD Suits 2377, 2388, 2577, 2588, all without straw Chopper Original Part: A2 Steering TPIHC-201 Stub Axle Heavy Duty $280 Suits 1420, 1440, 1460 Serial No. below 42555, 1620 Original Part: 71785C2, C2 TPIHC-219 King Pin Nut $9 Suits 1420, 1440, 1460 suits stub axle above Original Part: R1 TPCA-297 Tie Rod End-Inner $45 Suits 1460, 1480, 1640, 1660, 1666, 1680, 1688, 2166, 2188, 2344, 2366, 2388 Original Part: A43376, A1 TPIHC-1242 Rear Wheel Hub 8 Bolt $165 Suits 725, 1420, 1440, 1460, 1620 Original Part: C1, R11 HPIHC-9293 Wheel Hub $225 Suits 1460 to 2388 inclusive Original Part: C11 HPIHC-4042 Power Steering Cylinder End $125 Suits 7010, 8010 Original Part: , HPIHC-2201 Rim Rear Axle $600 Suits 2344, 2366, 2388, 2577, 2588 Original Part: A2 HPIHC-5374 Stub Axle $570 Suits 1420 to 2344 inclusive Original Part: C2 HPIHC-3911 Steering Arm Left $190 Suits 1420 to 2366 inclusive Original Part: C4 HPIHC-3912 Steering Arm Right $190 Suits 1420 to 2366 inclusive Original Part: C3 (08) Prices exclude GST 69

72 Case-IH Steering continued HPIHC-6140 Steering Cylinder Ball Joint $280 Rear Wheel Assist Only Suits 1440 to 2388 inclusive Original Part: C91 HPIHC-6796 Steering Cylinder Ball Joint $120 Suits 1440 to 2366 inclusive Original Part: C1 HPIHC-9774 Tie Rod Left Hand $240 Suits1460 to 2388 inclusive Original Part: A1 HPIHC-2906 Tie Rod $60 Suits 7010, 7120, 8010, 8120, 9120 Original Part: , Transmission and Final Drive Parts FD Re-Manufactured Final Drive $ Tooth Pinion Suits 1644, 1660, 1666, 1680, 1688 If no exchange add $ to price $1000 refunded on return of Final Drive Original Part: C1 NEW FD Re-Manufactured Final Drive $ Tooth Pinion Suits 1680 & 1480 If no exchange add $ to price $1000 refunded on return of Final Drive Original Part: 92770C92 NEW FD2188HD Re-Manufactured Final Drive $4400 Heavy Duty 2 Thick Pilot Housing No A2, Axle N A1 Suits 2344 Above serial No , 2366 above No , 2388 above No , 2588 If no exchange add $ to price $1000 refunded on return of Final Drive Original Part: NEW HPIHC-245 Drive Axle Coupling with Grease Nipple $95 Suits 711, 725, 1420, 1440 (with 3/₈ Hole) Original Part:184342C2, R2 HPIHC-246 Drive Axle Coupling with Grease Nipple $70 12 Spline 23/16 Suits 1460 to 2188 inclusive Original Part: C2, R1 HPIHC-8982 Coupling Planetary Drive $95 22 Spline 13/4 Suits 7010, 7120, 8010, 8120, 9120 Original Part: , HPIHC-1549 Drive Axle Coupling with Grease Nipple $90 12 Spline 23/16 Suits 2144, 2166, 2344, 2366, 2188, 2388, 2577, 2588 Original Part: A1 HPIHC-811 Axle Drive Shaft 273/64 long $270 Suits 1460 above S/No (Left Hand Side) 1660, 1666, 1688 on Left Hand Side Original Part: C1 HPIHC-812 Axle Drive Shaft 143/32 long $230 Suits 1460 above S/No (Right Hand Side) 1660, 1666, 1688 on Right Hand Side Original Part: R2 HPIHC-813 Axle Drive Shaft 321/64 long $325 Suits 1480 before S/No , 1680 Left Hand or Right Hand Original Part: C1 HPIHC-846 Axle Drive Shaft 291/2 long $610 Left & Right Clamp Type Suits 2188, 2388, 2377, 2577, 2588 Original Part: A1 HPIHC-814 Axle Drive Shaft 357/64 long $315 Suits 1480 above S/No Original Part: C1 HPIHC-0985 Axle Drive Shaft 34 long Left Hand $ Spline 13/4 Suits 8010, 8010AFX with 138mm Axle Extension Original Part: , HPIHC-0991 Axle Drive Shaft 415/8 long Right Hand $ Spline 13/4 Suits 8010, 8010AFX Original Part: HPIHC-0162 Axle Drive Shaft 261/8 long Left Hand $ Spline 13/4 Suits 8010, 8120, 9120 Original Part: HPIHC-0165 Axle Drive Shaft 363/8 long Right Hand $ Spline 13/4 Suits 8010, 8120, 9120 Original Part: , HPIHC-0951 Axle Drive Shaft 381/2 long Left Hand $ Spline 13/4 Suits 8010, 8120, 9120 Original Part: HPIHC-0957 Axle Drive Shaft 483/4 long Left Hand $ Spline 13/4 Suits 8010, 8120, 9120 Original Part: HPIHC-0974 Axle Drive Shaft 463/4 long Right Hand $ Spline 13/4 Suits 8010, 8120, 9120 Original Part: HPIHC-250 Short Axle Left Hand Side 14.5 long $155 Suits 711, 725, 1420 Original Part: R1 HPIHC-251 Long Axle Right Hand Side $280 Suits 711, 725 Original Part: R1 HPIHC-286 Final Drive Pinion $290 Suits 1460, 1440 E, 1660 below S/No 55C Original Part: R1 HPIHC-807 Final Drive Pinion $325 Suits 1480, 1680 Original Part: C1 HPIHC-5290 Final Drive Pinion $475 Suits 2144, 2166, 2344, 2388, 2577, 2588, 6088, 7088 Original Part: A1 70 Prices exclude GST (08)

73 Case-IH Reel Tynes at Realistic Prices Transmission and Final Drive Parts continued HPNH-9419 Planetary End Reduction Pinion $ /16 long, 23 Spline, 11 Teeth Suits 7010, 7120, 8010, 8120, 9120 Original Part: HPIHC-9688 Shaft Differential With Lock $ /32 long, 22 Spline Suits 7010, 8010, 7120, 8120, 9120 Original Part: HPIHC nd & 3rd Sliding Gear $475 Suits 1420 to 2388 inclusive Original Part: R1 HPIHC-1548 Gear Spool 59, 39 and 27 teeth $1100 Suits 1420 to 2388 inclusive Original Part: R1 HPIHC-6378 Shaft Brake Output $640 Suits 2344, 2366, 2388, 2588, 7088 Original Part: A1 HPIHC-0169 Hydro Input Shaft 137/16 long $ and 21 Spline Suits 1660 to 2388 inclusive Original Part: C1 HPIHC-1890 Transmission Shaft Input $600 Suits 2188, 2388 with C1 Transmission Original Part: R1 HPIHC-4217 Transmission Shaft Input 26 Tooth $525 Suits 2144 to 2388 inclusive with C1 Transmission Original Part: C1 HPIHC-6882 Shaft Propulsion Drive $900 Suits 7010, 8010, 8010AFX Original Part: HPIHC-3149 Hydrostat Pump Shaft $450 Suits 2366, 2388 Original Part: A1 Wind Fan Parts HPIHC-1177 Fan Vari-sheave Inner (on fan shaft) $190 Suits 1420 to 1680 inclusive Adjustable Half Original Part: C1, C93 HPIHC-1178 Fan Vari-sheave Outer (on fan shaft) $180 Suits 1420 to 1680 inclusive Fixed Half Original Part: C1 HPIHC-4853 Shaft-Elevator and Fan Drive $110 Suits 1420 to 2388 inclusive Original Part: C3 HPIHC-1552 Sheave Cleaning Inner on fan shaft $270 Suits 1644 to 2388 inclusive Original Part: C2 HPIHC-1553 Sheave Cleaning Outer on Fan Shaft $190 Suits 1644 to 2388 inclusive Original Part: , C2 HPIHC-3333 Fan Hub Driver Fixed Pulley $175 Suits 1420 to 2388 inclusive Original Part: C1 HPIHC-1141 Upper Sheave 12 Diameter $130 Fan Varispeed Suits 2366, 2377, 2388 Original Part: A1 HPIHC-3288 Sheave Fan Variator $55 Suits 1420 to 2388 inclusive, 300mm diameter Original Part: C1 HPIHC-9410 Shaft Cleaning Fan $875 Suits 7010, 7120 Original Part: , , , HPIHC-9411 Shaft Cleaning Fan $875 Suits 8010, 8010AFX, 8120, 9120 Original Part: , HPIHC-3948 Pulley Fan Drive 101/8 OD $120 Suits 1420 to 2388 inclusive Original Part: C1 HPIHC-5918 Pulley Fan Jackshaft 14 OD, 41/4 ID $90 Suits 2366, 2377, 2388 Original Part: A1 HPIHC-5286 Hub Assembly Fan Drive $160 Suits 1420 to 2388 inclusive, 2577, 2588, 6088, 7088 Original Part: C91 HPIHC-1551 Bushing Cleaning Fan Drive Pulley $22 Suits 1640 to 2388 inclusive, 2377, 2577, 2588 Original Part: C1 HPIHC-8215 Cleaning Fan Thrust Bearing $52 Suits 1640 to 2388 inclusive, 2377, 2577, 2588, 6088, 7088 Original Part: C92 General TP-543 Fan Motor Reversible 3 Speed $150 5/16 Double Shaft 12 volt Suits 1420 to 1480 inclusive Original Part: C1, C2 HPIHC-5190 Cab Fan Assembly $340 (includes Impellors & Motor) Suits 2144, 2166, 2188, 2388 Original Part: A1 HPIHC-5435 Flange Assembly, Fan Drive $45 Suits 7010, 8010, 7120, 8120, 9120 Original Part: HPIHC-0293 Gas Strut Left Cab Door $50 Suits 7010, 7120, 8010, 8010AFX, 9120 Original Part: HPIHC-8531 Gas Strut Rear Upper Panel Left & Right $50 Suits 7010, 8010, 8010AFX Original Part: HIPHC-2613 Idler Pulley 7 Diameter $55 Suits 1620 to 2388 inclusive Original Part: AG2613A LACNHSP12 Sieve Adjuster Linear Actuator $625 Suits 7010, 7110, 7230, 8010, 8120, 8230, 9120, 9230 HPNH2008 Linear Actuator Sieve Levelling $1775 Suits 8010 to 8230 inclusive Original Part: HPIHC-2685 Wobble Box - Oil Bath $2000 Suits 1010 and 1020 Fronts Original Part: (08) Prices exclude GST 71

74 Case-IH Honeybee Reel Tynes Draper at Realistic Platform Prices HPJD-869 Retractable Finger Guide $4 Suits Honeybee & New Holland Belt Fronts Original Part: , , HPJD-926 Retractable Finger Steel $10 Suits Honeybee & New Holland Belt Fronts Original Part: HPJD-927 Retractable Finger Holder $13 Suits Honeybee & New Holland Belt Fronts Original Part: HPJD-1716 Retractable Finger Guide Kit $10 including Plastic Guide, Tin Plate & 2 Torx Screws Suits Honeybee & New Holland Belt Fronts Original Part: , , HPJD-1716G Guide Only $3 Suits Honeybee & New Holland Belt Fronts HBWB Wear Bar 1215mm long $66 Suits Honeybee & New Holland Belt Fronts with SCH Knife Guards only Midwest Draper Platform MW14MGT3137 Knife Drive Belt $790 Midwest Belt Fronts HPJD927 Retractable Finger Holder $13 Midwest Belt Fronts MW4B77 Drum Drive Belt 77 $260 Suit Agco/Claas Midwest Belt Fronts 4 B banded belt MW4B78 Drum Drive Belt 78 $270 Suit Case New Holland Midwest Belt Fronts 4 B banded belt MW4B79 Drum Drive Belt 79 $280 Suit John Deere Midwest Belt Fronts 4 B banded belt MW20326 Retractable Finger Guide Inner Plate $14 Midwest Belt Fronts MW20327 Retractable Finger Guide Outer Plate $14 Midwest Belt Fronts MW20323 Retractable Finger Guide Nylon $10 Midwest Belt Fronts MWRF34ZP Retractable Finger $40 Midwest Fronts - 260mm FBMW60 Centre Feed Belt 60 Wide $320 Midwest Belt Fronts FBMW44 Centre Feed Belt 44 Wide $350 Midwest Belt Fronts MWFD Slip Clutch Friction Disc $46 Suits early models MWDHM Hydra motor Draper Drive Eaton $640 MWKHLH3 Knife Head Left Hand $360 Suits 3 Knife Sections MWKHRH3 Knife Head Right Hand $360 Suits 3 Knife Sections MWKHLH4 Knife Head Left Hand $360 Suits 4 Knife Sections MWKHRH4 Knife Head Right Hand $360 Suits 4 Knife Sections MWECR Eccentric Control Ring $85 Midwest Fronts Macdon Draper Platform HPMD-0532 Comer Macdon Knife Drive Box $2500 Suits Macdon 962, 972, 973, Case-IH 1042, 1052, 2052 By use of conversion kit also suits Macdon 960, Case-IH 1040 Original Part: HPMD-7357 Conversion Kit - Single Knife $ To adapt HPMD-0532 Knife Drive to Pre-1997 Models. Includes Drive Arm NB. Original Type Knife Drives no longer available. HPMD-7358 Conversion Kit - Double Knife $ To adapt HPMD-0532 Knife Drive to Pre-1997 Models. Includes Drive Arms NB. Original Type Knife Drives no longer available. HPMD-3029 Retractable Finger 12 $35 Suits Macdon 962, 972, 973, CIH 1042, 1052, To suit 12 Drum Original Part: HPMD-3054 Retractable Finger Guide $5 Suits Macdon 960, 962, 972, 973, CIH 1040, 1042, 1052, Original Part: HPMD-3055 Retractable Finger Holder $10 Suits Macdon 962, 972, 973, Case-IH 1042, 1052, Original Part: HPMD-3245 Retractable Finger 11 $30 To Suit 11 Drum Suits Macdon 962, 972, 973, CIH 1042, 1052, 2052 Original Part: Prices exclude GST (08)

75 John Deere Auger and Elevator Parts LAJVU6620D Vertical Unloading Auger 633/4 long $630 Suits 6620, 7720, 8820 (including T2 Models) Includes Splined Hubs & Double Flight Original Part: AH LAJVU9400D Vertical Unloading Auger 433/8 long $575 Suits 9400, 9500, 9600, 9610, CTS, CTSII Includes Splined Hubs & Double Flight Original Part: AH LAJVU9650D Vertical Unloading Auger 301/4 long $850 Suits 9650STS, 9750STS to 9770STS inclusive Includes Splined Hubs & Double Flight Original Part: AH LAJL-7720 Bin Loading Auger 75 long $470 Suits 7720, 7720 T2 Original Part: AH LAJL-8820 Bin Loading Auger 761/2 long $440 Suits 8820, 8820 T2 Original Part: AH HPJD-330 Bin Loading Auger Tube 625/8 long $320 Suits 7720, 8820 (including T2 Models) Original Part: AH98300 LAJL9400-1H Bin Loading Auger 501/2 long $630 Suits 9400, 9410, 9500, 9510, CTS, CTSII Original Part: AH LAJL H Bin Loading Auger 571/8 long $450 Suits 9600 above S/No , 9610 Original Part: AH LAJL9650H Bin Loading Auger 541/2 long $680 Suits 9650STS, 9750STS, 9660STS, 9760STS Original Part: AH LAJL-9650HE Bin Loading Auger $1220 Extended 12 Suits 9650, 9750, 9660, 9760 STS Original Part: AH E TLJD Bin Loading Auger Tube 221/8 long $195 Suits 9400, 9500 CTS, CTSII Original Part: AH TLJD Bin Loading Auger Tube 281/8 long $230 Suits 9600 above S/No , 9610 Original Part: AH LAJA-9400 Grain Tank Auxiliary Front 1121/4 long $800 Bottom Unloading Cross Auger Suits 9400 to 9510 inclusive, CTS, CTSII, 9650STS to 9760STS inclusive Original Part: AH201744, AH167847, AH LAJA Grain Tank Auxillary Rear 1121/4 long $800 Bottom Unloading Cross Auger Suits 9400 tp 9510 inclusive, CTS, CTSII, 9650STS to 9760 STS inclusive Original Part: AH201743, AH167848, AH LAJA-9660 Grain Tank Auxillary Front 1121/2 long $1100 Suits 9660STS to 9870STS inclusive Original Part: AH LAJA Grain Tank Auxiliary Rear 1231/8 long $575 Bottom Unloading Auger Suits 9600, 9610 Original Part: AH202881, AH154968, AH138397, AH LAJC-7720 Clean grain cross Auger 831/2 long $300 Suits 7720, 7720 T2 Original Part: AH LAJC-8820 Clean grain cross Auger 941/2 long $350 Suits 8820 T2 up to S/No Original Part: AH LAJC-8821 Clean grain cross Auger 971/2 long $330 Suits 8820 T2 above S/No Original Part: AH LAJC-9400 Clean grain cross Auger 791/2 long $525 Suits 9400, 9410, 9500, 9510, CTS, CTSII Original Part: AH LAJC Clean grain cross Auger 83/4 OD 921/4 long $400 Suits 9600 above S/No , 9610 Original Part: AH LAJC-9450 Clean grain cross Auger 821/8 long $700 Suits 9650STS, 9750STS, 9660STS, 9760STS, 9860STS Original Part: AH LAJR-8820 Return grain cross Auger 97 long $400 Suits 8820, 8820 T2 to S/No Original Part: AH96279 LAJR Return grain cross Auger 95 long $325 13/₈ Shaft Suits , CTS, CTSII Original Part: AH LAJR Return grain cross Auger 106 long $390 Suits 9600, 9610 Original Part: AH LAJT-9400 Return grain Auger Upper 631/16 long $325 Suits 9400, 9500, CTS, CTSII Original Part: AH LAJT-9600 Return grain Auger Upper 713/4 long $375 Suits 9600, 9610 Original Part: AH HPJD-7472 Return Grain Cross Auger 717/8 long $440 Suits 9650STS to 9870STS inclusive Original Part: AH HPJD-332 Vertical Unloading Auger Drive Shaft $180 Suits 7720, 8820, 9500, 9600, CTS Original Part: H96169 HPJD-715 Bevel Gear For Auger Gear Box 17 Tooth $100 Suits 6620, 7720, 8820 (including T2 Models) Original Part: H86912 HPJD-716 Input Shaft For Auger Gear Box $140 Suits 6620, 7720, 8820 (including T2 Models) Original Part: H94703 HPJD-717 Output Shaft For Auger Gear Box $140 Suits 7720, 8820 (including T2 Models) Original Part: H HPJD-2230 Loading Auger Gear Kit $425 including H & H Gears Suits CTSII, 9410 to 9610, 9650STS to 9870STS inclusive Original Part: AH HPJD-9934 Shaft Unloading and Separator Drive $295 Suits 9400 to 9510 inclusive, CTS, CTSII, 9650STS to 9870STS inclusive Original Part: H HPJD-8075 Sprocket Unloading Auger Countershaft $130 Suits 9400 to 9510 inclusive, CTS, CTSII, 9650STS to 9860STS inclusive Original Part: AH (08) Prices exclude GST 73

76 John Deere Auger and Elevator Parts continued HPJD-6131 Idler Sprocket Unloading Auger Drive $130 Suits 9400 to 9610 inclusive, CTS, CTSII, 9650STS to 9870STS inclusive Original Part: AH HPJD-8278 Pinion - Gear Case Horizontal Unloading Auger $210 Suits 9400 to 9610 inclusive, CTS, CTSII, 9650STS to 9770STS inclusive Original Part: CE18278 HPJD-5085 Shaft Auger Lower Vertical Gear Case $195 Suits CTS, CTSII, 6620 to 8820 inclusive, 9400 to 9610 inclusive, 9650STS to 9870STS inclusive Original Part: H LAJGS9650R Shoe Supply Auger 403/4 Right Hand $170 Suits 9650STS to 9870STS inclusive Original Part: AH (Two Used) LAJGS9650L Shoe Supply Auger 403/4 Left Hand $170 Suits 9650STS to 9870STS inclusive Original Part: AH (Two Used) BJD-838 Wood Bearing Block $20 Shoe Supply Augers Suits 6620T2, 7720, 7720T2, 8820, 8820T2 Original Part: H84838 BJD-839 Wood Bearing Block $14 Shoe Supply Auger Suits 9400 to 9610 inclusive, CTS, CTSII Original Part: H HPJD-1008 Clean Grain Elevator Boot $1250 Suits 9650STS to 9860STS Original Part: AH NEW HPJD-5422 Drive Shaft Delivery Augers $350 Suits 9400, 9500, CTS, CTSII, 9650CTS, 9660CTS Original Part: H HPJD-5070 Sprocket Grain Tank Cross Auger $ Teeth, 60 Chain Suits 9400 to 9610 inclusive, CTS, CTSII, 9650STS to 9770STS inclusive Original Part: AH HPJD-5080 Sprocket Vertical Auger Lower Gearcase $130 Suits 9400 to 9600 inclusive, CTS, CTSII, 9650STS to 9770STS inclusive Original Part: AH Chaffer & Shoe (Sieve) Parts SHJD-9400 Chaffer Frame (Top) $ to 9560 inclusive, CTS, CTSII Original Part: AH SHJD-9600 Chaffer Frame (Top) $1950 Improved with thicker steel and more reinforcement Suits 9600, 9610, 9650, 9660 Original Part: AH SHJDB-9400 Sieve Frame (Bottom) $1800 Suits 9400 to 9560, CTS, CTSII Original Part: AH SHJDP-9400 Precleaner Frame $2800 Suits 9400 to 9510 inclusive, CTS, CTSII Original Part: AH SHJDB-9600 Sieve Frame (Bottom) $1750 Suits 9600, 9610, 9650, 9660 Original Part: AH SHJDP-9600 Precleaner Frame $1700 Suits 9600, 9610, 9650, 9660 Original Part: AH HPJD-3598 Shaft Shoe Drive 66 long $450 Suits CTS, CTSII, 9400 to 9510, 9650sts, 9750sts Original Part: AH HPJD-3375 Shaft Separator Drive $575 Suits 9650sts to 9870STS inclusive Original Part: H HPJD-3602 Cam Outer Right Hd Shoe $105 Suits CTS, CTSII, 9400 to 9610 inclusive Original Part: H HPJD-3599 Cam Outer Left Hd Shoe $95 Suits CTS, CTSII, 9400 to 9619 inclusive Original Part: H HPJD-4546 Cam Outer Right Hd Shoe $45 Suits 9650STS to 9870STS inclusive Original Part: H HPJD-4549 Cam Inner RH Shoe $55 Suits 9400 to 9610 inclusive, cts, ctsii, 9650STS, 9750STS, 9760STS Original Part: H HPJD-4550 Cam Inner LH Shoe $100 Suits 9400 to 9610 inclusive, cts, ctsii, 9650STS, 9750STS, 9760STS Original Part: H HPJD-4547 Cam Outer Left Hd Shoe $45 Suits 9650STS to 9870STS inclusive Original Part: H HPJD-3603 Hub Sieve & Chaffer Drive $95 Suits 9400 to 9610 inclusive, cts, ctsii, 9650STS to 9870STS inclusive Original Part: H HPJD-9846 Arm Swinger Right Hd Chaffer Assembly $200 Suits 9650STS to 9870STS inclusive Original Part: AH HPJD-9844 Arm Swinger Left Hd Chaffer $200 Suits 9650STS to 9870STS inclusive Original Part: AH Prices exclude GST (08)

77 John Deere Chaffer & Shoe (Sieve) Parts HPJD-1186 Shaft Cleaning Shoe Drive 645/8 long $325 Suits 9650STS to 9870STS inclusive Original Part: H171186, H HPJD-2862 Chaffer Shoe Frame Left Hand $1275 Suits 9570STS, 9670STS, 9770STS, 9870STS Original Part: AH222862, AH165503, AH HPJD-2863 Chaffer Shoe Frame Right Hand $1275 Suits 9570STS, 9670STS, 9770STS, 9870STS Original Part: AH222863, AH165502, AH Engine Parts HPJD-809 Radiator $1400 Suits 7720, 8820, 7720 T2, 8820 T2 Includes Cap Original Part: AH HPJD-9363 Radiator HEAVY DUTY $1450 Suits 9500, 9510, 9600 above Ser No , 9610, CTS above Ser No , CTsII 660mm wide x 1080mm high Original Part: AH HPJD-5639 Rotary Screen Pulley $67 Suits CTS, CTSII, 9400 to 9610 inclusive, 9650STS to 9870STS inclusive Original Part: AH HPJD-0497 Rotary Screen Idler $32 Suits CTS, CTSII, 9400 to 9610 inclusive, 9650STS to 9870STS inclusive Original Part: AH HPJD-1146 Rotary Screen Shaft $130 Suits 9650STS to 9770STS inclusive Original Part: H Engine Output Drive Parts HPJD-0900 Idler Feed Accelerator/Secondary Jackshaft $75 Suits 9650STS to 9860STS inclusive Original Part: AH HPJD-2801 Shaft Primary Jackshaft $875 Suits 9560STS, 9570STS Original Part: H Feeder House Parts HPJD-7643 Lower Feeder Shaft $690 Suits 8820, 9600 Original Part: AH97643 HPJD-1567 Upper Feeder House Shaft 737/8 long $500 Suits 9600 above Serial No Original Part: H HPJD-6577 Upper Feeder House Shaft 737/8 long $650 Suits 9610, 9650, 9660 Original Part: H HPJD-4587 Sheave Feeder House $390 Suits 9560STS, 9660STS, 9760STS, 9860STS Original Part: AH HPJD-2068 Electromagnetic Clutch Brush Holder $270 Suits 9400 to CTSII inclusive, 9400 to 9610 inclusive, cts, ctsii, 9650STS to 9760STS inclusive Original Part: AH HPJD-9709 Sprocket Feeder Chain $90 Suits 9650STS to 9860STS inclusive Original Part: H HPJD-9681 Upper Feeder House Shaft RH Stub $300 Suits CTS, CTSII, 9400, 9500 Original Part: H HPJD-7800 Feeder House Bottom $1300 Suits 9650STS, 9750STS Original Part: AH HPJD-3734 Feeder Drum Shaft $150 Suits , CTS, CTSII, 9650STS, 9750STS Original Part: H HPJD-6091 Arm Feeder Idler Shaft $88 Suits inclusive, CTS, CTSII, 9650STS, 9750STS Original Part: AH HPJD-6576 Upper Feeder House Shaft 67 long $850 Suits 9650STS 9860sts inclusive, cts, ctsii Original Part: H HPJD-8671 Shaft Feeder Roller 521/2 x 11/2 Hex $125 Suits 9660STS, 9760STS, 9860STS Original Part: H HPJD-6296 Arm Feeder Drum $100 Suits 9670STS, 9770STS, 9870STS Original Part: AH HPJD-8397 Idler Arm Feeder House $180 Suits 9650STS to 9870STS inclusive Original Part: AH HPJD-3076 Sprocket Feeder House Drive $260 22/26 Tooth, 21 Internal Spline Suits 9660STS, 9760STS, 9870STS Original Part: AH HPJD-9634 Sprocket Feeder House $80 Suits 9670STS, 9770STS, 9870STS Original Part: AH HPJD-4011 Shaft- Feeder House Lower $550 Suits 9670STS, 9770STS, 9870STS Original Part: H HPJD-5454 Shaft Feeder House $175 Suits 9400 to 9600 inclusive, 9650STS to 9870STS inclusive Original Part: AH HPJD-1813 Pin Pinion Gear Feeder House $40 Suits 9650STS to 9860STS inclusive Original Part: Z61813 (08) Prices exclude GST 75

78 John Deere Feeder House Parts continued HPJD-2714 Gear Pinion Feeder House $350 Suits 9650STS to 9770STS inclusive Original Part: Z12714 HPJD-8522 Gear Pinion Feeder House $375 Suits 9660STS to 9870STS inclusive Original Part: CE18522 HPJD-7015 Gear Input Feeder House $430 Suits 9660STS to 9770STS inclusive Original Part: H Hydraulic Parts HPJD-9588 Cooler Hydraulic $880 Suits 9400, 9500, 9600, 9510, 9610, CTS, CTSII Original Part: AH149588, AH HPJD-3229 Hydraulic Cylinder Reel Lift $295 Suits 900 Series Flex, 900 Series Rigid, 925D 936D Fronts Original Part: AH17322 Retractable Fingers HPJD-868 Steel Retractable Finger $9 Suits 955, 975, 630 Original Part: Z26570 HPJD-869 Retractable Finger Guide $4 Suits 955, 975, 630 Original Part: Z30752 HPJD-870 Retractable Finger Holder $9 Suits 955, 975, 630 Original Part: AZ20696 HPJD-926 Retractable Finger Steel $10 Suits all 200 & 900 Series Rigid Fronts Original Part: H HPJD-927 Retractable Finger Holder $13 Suits all 200 & 900 Series Rigid Fronts Original Part: AH171884, AH107066, AH164128, AH87944 HPJD-1716 Retractable Finger Guide Kit $6 including Plastic Guide, Tin Plate & 2 Torx Screws Suits all 200 & 900 Series Fronts Original Part: H86918, H87044, H87192 HPJD1716-G Guide Only $3 Suits all 200 & 900 Series Fronts Original Part: H87044 HPJD-1602 Retractable Finger Holder $12 Suits 625, 630, 635 Fronts Original Part: AH Poly Retractable Fingers (Insurance against serious damage) Replace Steel Retractable Fingers Strong & Durable Made from tough fibreglass with outer coating of hardwearing plastic Will not damage your concave, drumbars or other parts of the header like steel fingers. Retract 1F Poly Finger only $12 Suits 200 & 900 John Deere Front, Honeybee Retract 1 Guide & Torx Screws $4 Suits Poly Finger Steering HPJD-4612 Power Steering Cylinder End $110 Suits CTS, CTSII, 9400 to 9610 inclusive Original Part: AH HPJD-2573 Hub Rear Wheel $435 Suits 9500 to 9610 inclusive, CTS, CTSII, 9560STS Original Part: AH HPJD-5129 Rear Rim 14 x 26 $590 Suits JD9500 to 9650STS inclusive Original Part: AH HPJD-5654 Left Hand Stub Axle $750 Suits CTS, CTSII, 9400 to 9610 Original Part: AH HPJD-5655 Right Hand Stub Axle $750 Suits CTS, CTSII, 9400 to 9610 inclusive Original Part: AH173844, AH Transmission and Final Drive Parts FD9650L Re-Manufactured Final Drive (LH) $5400 Heavy Duty Suits 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS If no exchange add $1000 $1000 refunded on return of final drive Original Part: AH FD9650R Re-Manufactured Final Drive (RH) $5400 Heavy Duty Suits 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS If no exchange add $1000 $1000 refunded on return of final drive Original Part: AH HPJD-441 Hydrostatic Output Shaft $400 Suits 6620, 7700, 7720, 8820 with 200 Series Sunstrand (including T2 Models) Original Part: H98071 HPJD-1007 Gearbox input shaft hydro transmission $300 Suits 7720, 8820 (including T2 Models) Original Part: AH HPJD-284 Final Drive Pinion 11 Tooth $230 Suits 7720 (including T2 Models) Original Part: H85817 HPJD-726 Final Drive Pinion 10 Tooth $270 Suits 7720 T2 Original Part: H HPJD-7014 Final Drive Pinion $280 Suits 9400 to 9610 inclusive, CTSII Original Part: H HPJD-7722 Final Drive Pinion 10 Tooth $350 Suits 9650STS to 9870sts inclusive Original Part: AH Prices exclude GST (08)

79 John Deere Transmission and Final Drive Parts continued HPJD-675 Final Drive Coupler, 23 Spline $50 (with Grease Nipple) Suits 7720 to 8820T2 Original Part: H HPJD-5510 Final Drive Coupler $40 Suits 9400 to 9610 inclusive, cts, ctsii, 9650STS to 9860STS inclusive Original Part: H HPJD-676 Axle Drive Shaft 1415/16 long, Left Hand $100 Suits 7720, 955 with Heavy Final Drives Original Part: H123613, H85876 HPJD-677 Axle Drive Shaft 1813/16 long, Left Hand $110 Suits 8820, 8820 T2 Original Part: H123623, H122291, H HPJD-5665 Axle Drive Shaft Right Hand $ /4 long, 18 Spline Suits 9400, 9410, 9500, 9510, 9650STS to 9870STS inclusive Original Part: H HPJD-5666 Axle Drive Shaft Left Hand $ /48 long, 18 Spline Suits 9400, 9410,9500, 9510,9650STS to 9870STS inclusive Original Part: H HPJD-3660 Shaft Hydrostatic Pump $470 Suits 9400 to 9610 inclusive,, CTS, CTSII Original Part: AH HPJD-1190 Coupling hydro drive $120 Suits 7720, 8820, 7720T2, 8820T2 Original Part: H98238 HPJD-327 Brake Drum $375 Suits 7720, 8820, 7720 T2, 8820 T2 Original Part: H85887 HPJD x 24 8 Stud Rear Rim $260 Suits 7720, 7720 T2, 8820, 8820 T2 HPJD x 24 8 Stud Rear Rim $275 Suits 7720, 7720 T2, 8820, 8820 T2, 9500, 9600 Original Part: AH HPJD-5662 HPJD-5663 Walker Parts Shaft, Ring & Pinion Final Drive 18 Tooth, 300mm Long $220 Suits CTS, CTSII, 9400 to 9610 inclusive, 9650STS to 9870STS inclusive Original Part: H Shaft, Ring & Pinion Final Drive 18 Tooth, 400mm Long $255 Suits CTS, 9400 to 9610 inclusive, 9650STS to 9870STS inclusive Original Part: H BJW-614 Walker Blocks (1 Set of 2 Halves) $40 Suits Front or Rear 11/2 Crank Suits 7720, 8820, 7720 T2, 8820 T2 Original Part: AH92589, AH BJW-677 Walker Block (1 Set of 2 Halves) Wood $45 Suits 9400 above Serial No , 9500 above Serial No , 9600 above Serial No Original Part: H BJW-820 Walker Block (1 set of 2 Halves) Wood $72 Replaces Aluminium Blocks 39.8mm Suits 9400 above Serial No , 9500 above Serial No , 9410, 9600 above Serial No , 9510 Original Part: AH BJW-821 Walker Block (1 Set of 2 Halves) $78 Slightly Undersize to suit Worn Shafts 36.5mm Replaces Aluminium Blocks Suits 9400 above Serial No , 9610, 9500 above Serial No , 9600 above Serial No BJW-217 Walker Block (1 Set of 2 Halves) $55 38mm Lug Type Suits Late 955, 975, 1075, 6620 T2 Fits HPJD-897 & HPJD898 Walker Cranks Original Part: AZ31217 HPJD-1668 Walker Crankshaft Rear Only $550 Suits 9400, 9500, 9510 Original Part: AH HPJD-1669 Walker Crankshaft Front or Rear $550 Suits 9400, 9500, 9510 Original Part: AH HPJD-1670 Walker Crankshaft Rear Only $800 Suits 9600, 9610 Original Part: AH HPJD-1671 Walker Crankshaft Front or Rear $550 Suits 9600, 9610 Ali Blocks Only Original Part: AH HPJD-1672 Walker Crankshaft Front Only $550 Suits 7700, 7720, 7720T2 Original Par: AH92415 HPJD-1673 Walker Crankshaft $800 Suits 8820, 8820T2 Original Pat: AH91790 Wind Fan Parts HPJD-432 Vari Speed Sheave $160 Inner (on Fan Shaft) Suits 7720, 8820, 7720 T2, 8820 T2 Original Par: AH HPJD-433 Vari Speed Sheave Outer $192 (On Fan Shaft) Suits 7720, 8820, 7720 T2, 8820 T2 Original art: H97600 HPJD-434 Vari Speed Sheave Inner $110 (On Secondary Countershaft) Suits 7720, 8820, 7720 T2, 8820 T2 Original art: H93503 HPJD-435 Vari Speed Sheave Outer $110 (On Secondary Countershaft) Suits 7720, 8820, 7720 T2, 8820 T2 Original Prt: H HPJD-6016 Sheave Inner Fan Drive Standard Speed $200 Suits 9660STS, 9760STS, 9860STS Original Part: H HPJD-351 Cleaning Fan Shaft 77 long $300 Suits 8820, 8820 T2 Original Part: H (08) Prices exclude GST 77

80 John Deere Wind Fan Parts continued HPJD-5396 Cleaning Fan Shaft $510 Suits 9400, 9500, 9510, CTS, CTSII Original Part: H HPJD-1158 Fan Vari Sheave Inner $110 Suits 955, 975, 1075, 1065, 1051 (Not on fan shaft) Original Part: Z10676 HPJD-1159 Fan Vari Sheave Outer $110 Suits 955, 975, 1075, 1065, 1051 (Not on fan shaft) Original Part: Z11214 HPJD-7535 Fan Sheave Inner 13 Diameter $275 Suits 9650STS to 9870STS inclusive Original Part: AH HPJD-7534 Fan Sheave Outer $250 Suits 9650STS to 9860STS inclusive Original Part: AH HPJD-1051 Fan Sheave Inner 330mm Diameter $320 Suits 9650STS to 9870STS inclusive Original Part: H HPJD-4179 Fan Sheave Outer 330mm Diameter $ STS to 9870STS inclusive Original Part: AH HPJD-3376 Fan Drive Shaft 6511/16 Long $495 Suits 9650STS above S/No , 9750STS above S/No , 9660STS, 9760STS, 9770STS, 9860STS, 9870STS Original Part: H General HPJD-8925 Cab Fan Motor $210 Pressuriser Suits 9400 to 9610, 9650STS, 9660STS Original Part: AH HPJD-8926 Cab Fan Motor $175 Air Con/Heater Suits 9400 to 9610, 9650STS Original Part: AH TP-541 Fan Motor $140 Suits 3 Speed 3/₈ Double Shaft 12 Volt Suits 7720, 7720T2 Original Part: AH80194 HPJD-1481 Knife Drive Wobble Box $1300 Suits 200 & 900 Series Rigid Fronts (No Snout) Original Part: AE41481 HPJDH-1481 Wobble Box Housing $295 Suit HPJD1481 Original Part: AE35149 HPJD-6402 Knife Drive Wobble Box $1330 Suits 900 Series Rigid + Flex Original Part: AH HPJD-5152 Snout suits previous item $95 Suits Knife Drive Wobble Box HPJD & 900 Series Rigid Fronts Original Part: AE35152 HPJD Knife Drive Repair kit $1100 Suits 200 & 900 Series Knife Drive Box NEW NEW HPJD-4697 Knife Drive $2100 Suits 925D, 930D, 936D Draper fronts (Not inc. Pulley) Original Part: DE19786 HPJD-4714 Knife Drive $2000 Suits 600 Flex & Rigid Fronts (Not inc. Pulley) Original Part: DE19785 NEW HPJD-8703 Cab Door Glass $625 Suits 9400 to 9610, CTS, CTSII, 9650STS, 9750STS Original Part: AH HPJD-6648 Windscreen $870 Suits 9400 to 9610, 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Original Part: AH HPJD-8598 Gas Strut Rear Service Access & Rear Corner $65 Suits 9400, 9500, 9600, CTS, CTSII AH HPJD-8597 Gas Strut $80 Suits 9400 to 9610 inclusive, CTS, CTSII, 9650STS to 9870STS inclusive Original Part: AH HPJD-4450 Flanged Idler 2B x 83/4 $55 Suits 6620 to 8820T2 inclusive, 9410 to 9610 inclusive, 9650STS to 9870STS inclusive Original Part: AH94450 HPJD-9549 Idler Rotary Screen $55 Suits all 9650STS 9870STS inclusive Original Part: AH HPJD-5276 Flanged Idler $50 Suits 6620 to 8820T2 inclusive, 9410 to 9610 inclusive, 9650STS to 9870STS inclusive Original Part: AH85276 HPJD-1010 Shaft Rear Beater $375 Suits 9650STS to 9860STS inclusive Original Part: H HPJD-8386 Shaft Front Beater 65 long $320 Suits 9650STS to 9870STS inclusive Original Part: H LBJD Fin Back Beater 11/2 Shaft $1000 Suits 7720, 7720 T2 Original Part: AH146170, AH LBJD Fin Back Beater 11/2 Shaft $1100 Suits 8820, 8820 T2 Original Part: AH146149, AH LBJD Fin Back Beater 11/2 Shaft $1000 Suits 9400, 9410, 9450, 9500, 9510, 9550 Original Part: H LBJD Fin Back Beater 11/2 Shaft $1500 N.B.: Clamps both ends Suits 9600, 9610, 9650 Original Part: H LBFJD-9650FH Feed Accelerator Wear Plate $20 Suits 9650STS to 9870STS inclusive Original Part: H TPJD-1303 Evaporator/Heater $410 Suits 6620, 7720, 7720T2, 8820, 8820T2 Original Part: AR85246, AR73463, AR88076 HPJD-9992 Electric Actuator 12 Stroke $1000 Suits 9650STS to 9870STS inclusive operates to position Chopper Original Part: AH HPJD-SCD936 Clutch Assembly - Draper Front $485 Suits All Draper platforms To avoid damage to your drive line NEW 78 Prices exclude GST (08)

81 New Holland Auger Parts HPNH-260 Bevel Gear Bubble up Auger Gear Box $350 Suits TR70, TR85, TR86, TR87, TR88 Original Part: HPNH-7827 Shaft Bubble up Gear Box $595 Suits TR89, TR98, TR99 Original Part: HPNH-8345 Auger Return/Tailing $700 Suits CR920, 940, 960 Original Part: NEW LANS-34 Bin Loading Bubble up Auger $595 Suits TX34, TX36, TX64 Original Part: LANS-66 Bin Loading Bubble up Auger $800 Suits TX66, TX68 LANS-70 Bin Loading Bubble up Auger 841/4 long $600 Suits TR85, TR86, TR87, TR88 (15 Spline) Original Part: LANS-95 Bin Loading Bubble up Auger 881/4 long $1050 Suits TR95, TR96, TR97, TR98 (15 Spline Only) Original Part: , LANC-71 Clean Grain Auger 1 Shaft 691/2 long $550 Suits TR85, TR86, TR87, TR88 Original Part: , 62009, LANC-85 Clean Grain Cross 11/8 Shaft 691/2 long $525 Suits TR85, TR86, TR87, TR88 Original Part: LANC-87 Clean Grain Auger 11/8 Bearing 691/2 long $550 13/₈ Sprocket Suits TR87, TR88 Original Part: , LANC-95 Clean Grain Auger 85 long $550 13/₈ Sprocket 11/8 Bearing Suits TR96, TR97, TR98, TR99, TR89 Original Part: , LAIVU-8010 Vertical Unloading Auger 471/4 long $770 Suits CR960, CR970, CR9060, CR9070, CX860, CX880, CX8080 Original Part: LANR-71 Repeat Cross Auger $525 Suits TR70 to TR88 inclusive Original Part: , HPIHC-5223 Horizontal Unloading Auger $445 Extender 3ft Length Suits CR940, CR960, CR970, CR9060, CR9070, CR9080 Original Part: Chaffer and Sieve Area Parts HPIHC-2561 Arm Lower Shaker Shoe $90 Suits CR9040, CR9060, CR9070 Original Part: HPNH-1540 Bush Grain Tray and Shaker Shoe $7 ea Suits TR86, 87, 88, 96, 97, 98, 89, 99, NH8060, 8080, TX34, TX64, TX66, TX68, CX840, CX860, CX880, CX8070, CX8080, CX8090, CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070 Original Part: , , , HPIHC-4041 Arm Upper Shaker Shoe $80 Suits cr920, cr940, cr960, cr970, cr9040, cr9060, cr9070 Original Part: HPIHC-4571 Arm Upper Shoe Drive Left hand $210 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070 Original Part: HPIHC-4573 Arm Upper Shoe Drive Right hand $210 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070 Original Part: HPIHC-2651 Bushing Upper Shaker Shoe $8 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080 Original Part: HPIHC-8222 Bushing Upper Shaker Shoe 21mm Hole $4.75 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070 Original Part: , HPIHC-9072 Rubber Bush Upper Shoe Drive $65 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080 Original Part: , , , , HPIHC-9232 Bushing Cleaning Shoe Pivot Frame $13 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080, CX8090, TX36, TX66, TX68 Original Part: HPIHC-4817 Roller -Cleaning Shoe Pivot Frame $32 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080, CX8090, TX36, TX66, TX68 Original Part: HPIHC-1928 Shaft -Cleaning Shoe Pivot Frame 89/32 long $80 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080, CX8090, TX36, TX66, TX68 Original Part: , HPIHC-4453 Support Upper Shoe Drive (RH) $80 Suits all CR & CX Models Original Part: Engine Output Drive Parts HPNH-1357 Separator Clutch Plate $220ea 2 per Harvester Suits TR70, TR85, TR86, TR87, TR88, TR89, TR95, TR96, TR97, TR98, TR99 Original Part: , NEW (08) Prices exclude GST 79

82 New Holland Retractable Fingers HPNH-878 Retractable Finger $6 Suits 1540, 1545, 1550, TR70, TR85 (705 Fronts) Original Part: HPNH-919 Retractable Finger $11 Suits 806, 971, 975 Fronts Original Part: , , , HPNH-1755 Retractable Finger Holder $20 Suits 806, 971, 973 Fronts Original Part: , HPNH-879 Retractable Finger Holder $7 Suits 1540, 1545, 1550 Original Part: HPJD-869 Retractable Finger Guide $4 Suits TR70, TR85, 8040, 8060, 8080 Original Part: HPNH-1002 Retractable Finger Guide $9 Suits 806, 971, 972, 973 Fronts Original Part: HPNH-1415 Top & Bottom Plates with Bolts & Ball $16 Suits 1540, 1545, 1550, TR70, TR85, 8040, 8060, 8080 Original Part: Poly Retractable Fingers (Insurance against serious damage) Replace Steel Retractable Fingers Strong & Durable Made from tough fibreglass with outer coating of hardwearing plastic Will not damage your concave, drumbars or other parts of the header like steel fingers. Retract 3F Poly Finger suits 971 Front $11 Retract 3 Guide & Attaching Screws suits 971 Front $4 Transmission and Final Drive Parts HPJD-327 Brake Drum $375 Suits TR70, TR85 Original Part: HPNH-1400 Brake Disc (26 Spline) $195 Suits 8060, 8070, 8080, TX34, TX36, TR85, TR86, TR87, TR95, 96, 97 Original Part: , , HPJD-441 Hydrostatic Output Shaft 12 $400 Suits Sunstrand 200 Series late TR70, 85, 95 Original Part: HPJD-1007 Gearbox Input Shaft (Hydro Transmission) $400 Suits TR Series Original Part: HPNH-1826 Final Drive Pinion 10 Tooth $650 Suits TR86, TR87 Original Part: , Replaced by HPJD-284 Final Drive Pinion 11 Tooth $230 Suits TR s with 26 wheels Original Part: HPJD-675 Drive Axle Coupling 23 Spline $50 With Grease Nipple Suits TR70, TR99, TR85 before Serial No Original Part: , HPNH-1166 Drive Axle Coupling 22 Spline $170 With Grease Nipple Suits TR85, TR95 Inner, TR86, TR87, TR88, TR89, TR99, TX34, TX64, TX66, TX68, 8060, 8070, 8080 Original Part: , , HPIHC-8982 Planetary Drive Coupling $95 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8040, CX8050 Original Part: HPNH-9419 Planetary End Reduction Pinion $ /16 long, 23 Spline, 11 Teeth Suits CR940, CR960, CR9040, CR9060, CX820, CX840, CX8060 Original Part: HPIHC-0985 Axle Drive Shaft 311/2 long Left Hand $ Spline 13/4 Suits CR970, CR980, CR9070, CX860, CX880, CX8080, CX8090 Original Part: , HPIHC-0991 Axle Drive Shaft 415/8 long Right Hand $ Spline 13/4 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080 Original Part: HPIHC-0162 Axle Drive Shaft 261/8 long Left Hand $ Spline 13/4 Suits CR970, CR980, CR9070, (some CX860, CX880), CX8070, CX8080, CX8090 Original Part: HPIHC-0165 Axle Drive Shaft 363/8 long Right Hand $ Spline 13/4 Suits CR970, CR980, CR9070, (some CX860, CX880), CX8070, CX8080, CX8090 Original Part: , HPIHC-0951 Axle Drive Shaft 381/2 long Left Hand $ Spline 13/4 Suits CR920, CR940, CR960, CR970, CR9040, CR9060, CR9070, CX840, CX860, CX880, CX8070, CX8080 Original Part: HPIHC-0957 Axle Drive Shaft 483/4 long Left Hand $ Spline 13/4 Suits CR970, CR980, CR9070, (some CX860, CX880), CX8070, CX8080, CX8090 Original Part: HPIHC-0974 Axle Drive Shaft 463/4 long Right Hand $ Spline 13/4 Suits CR970, CR980, CR9070, CX860, CX880, CX8080, CX8090 Original Part: HPIHC-9688 Shaft Differential With Lock $ /32 long, 22 Spline Suits CX840, CX860, CX880, CR9040, CR9060, CR9070, CR920, CR940, CR960, CR970 Original Part: Prices exclude GST (08)

83 New Holland Steering HPNH-881 Tie Rod End Left Hand & Right Hand $55 Suits CR940, CR960, CR970, CR9060, CR9070, CX860, CX880, CX8070, CX8080 Original Part: , Wind Fan Parts HPNH-1145 Fan vari sheave suits inner and outer $175 Suits 8060, 8070, 8080 Original Part: HPNH-1171 Fan sheave Inner Driven $350 Suits TR70, TR85 Original Part: HPNH-1172 Fan sheave Outer Driven $290 Suits TR70, TR85 Original Part: HPNH-1173 Fan drive sheave Driving-Outer $440 Suits TR70, TR85 Original Part: HPNH-1170 Cleaning Fan shaft $445 Suits TR85, TR86, TR87, TR88 Original Part: HPNH-1150 Wind fan blade $50 Suits TR70, TR85, TR86, TR87, TR88 Original Part: Knife Drive and Parts HPNH-1394 Wobble Box (no arm, no pulley) $1700 Suits 806, 971, 972, 973 Fronts with Splined Shaft for pulley Original Part: HPNH-1914 Wobble Box (no arm, no pulley) $1700 Suits 71C, 73C & CIH 2010, 2020 with tapered shaft for pulley (Key included) Original Part: HPNH-1806 Pulley suit HPNH1914 Wobble Box $195 Suits 71C, 73C & CIH 2010, 2020 Tapered Centre on Pulley Original Part: HPNH-1130 Wobble Box heavy duty with arm (no pulley) $1500 Suits 705, 805 Fronts Original Part: HPNH-1539 Knife Drive Arm (12 Spline) $230 Suits 971, 973, 71C, 73C Original Part: replaces HPNH-1503 Pulley for HPNH1130 Wobble Box $230 Suits 705, 805 Fronts Original Part: HPNH-1128 Rocker Fork suits HPNH-1130 Box $375 Suits 705, 805 Fronts Original Part: General GPNH-TR70 Grainpan $1100 Suits TR70, 85, 86, 87, 88 TP-541 Cab Fan $140 Suits 8060, 8070, 8080, TR88, TR98 LACNHSP12 Sieve Adjuster Linear Actuator $625 Suits CR920, CR940, CR960, CR970, CX840, CX860, CX880 Original Part: , HPNH2008 Linear Actuator Sieve Levelling $1850 Suits CR940 to CR9080 inclusive Original Part: HPIHC-0293 Gas Strut Left Cab Door $50 Suits CR920, CR940, CR960, 970, CR9040, CR9060, CR9070, CR840, CX860, CX880, CX8070, CX8080, CX8090 Original Part: Chopper Blades HPNH-7640 Stationary Chopper Knife $12 Suits CR940, CR960, CR970 Original Part: HPNH-7624 Chopper Blade Straight $16 Suits CR940, CR960, CR970 Original Part: HPNH-1976 Chopper Blade Winged Left $22 Suits CR940, CR960, CR970 Original Part: HPNH-1978 Chopper Blade Winged Right $22 Suits CR940, CR960, CR970 Original Part: HPNH-1706 Chopper Blade Kit $725 kit 14 Winged Left, 14 Winged Right, 28 Bolts & Lock Nuts Suits CR960 original Part: HPNH-1711 Chopper Blade Kit $600 kit 16 Winged Left, 16 Winged Right, 32 Bolts & Lock Nuts Suits CR970 Original Part: HPNH-3455 Stationary Hardened Knife $37 Suits CR9070, CR9080, CR9090 Original Part: HPNH-8524 Stationary Chopper Knife $7 Suits CR9070, CR9080, CR9090 Original Part: HPNH-8316 Chopper Blade Straight $16 Suits CR9070, CR9080, CR9090 Original Part: HPNH-4920 Chopper Blade Winged Left $32 Suits CR9070, CR9080, CR9090 Original Part: HPNH-0120 Rocker Fork suits HPNH-1394 Box $280 Suits 971, 972, 973 Original Part: , replaces HPNH-4918 Chopper Blade Winged Right $32 Suits CR9070, CR9080, CR9090 Original Part: (08) Prices exclude GST 81

84 Massey Ferguson/Agco/Allis Auger Parts AGL-C100 Unloading Auger Elbow Collar Assembly $1400 Heavy duty with nylon rotating plates Suits Allis Late L, N5, N6, N7, R40, R50 Original Part: Clutches and Pressure Plates HPMF Pressure Plate Assembly $300 Remanufactured Suits Late MF750, 850 Original Part: M1 HPMF-1185 Clutch P late 9 $155 ea 13/₈ Centre 10 Spline 4 Pad - metallic Suits Late MF750, per harvester Original Part: M1 Engine Output Drive Parts TPAC-1445 Water Pump $300 Suits Allis Re-manuafactured for models with D3500 & 670T Engines Original Part: HPAC-655 Rotor Gear Box Shaft $950 Suits Allis N5, N6, N7 Original Part: HPAC-7087 Rotor Gear Box Input Shaft $2300 Suits Allis R60, R70, R62, R72 Original Part: HPAC-740 Rotor Drive Coupling $895 Suits Allis N5 Above S/No 4501, N6, Above S/No 5101, N7 Above S/No 2501 Original Part: HPAC-1710 Rotor Drive Coupling $1300 Suits Agco R62, R72, R65, R75 Original Part: Hydraulic Parts HPMF-223 Main Hydraulic Pump $950 Suits MF750, 850, 760, 860 Original Part: M91 Retractable Fingers MW20326 Retractable Finger Guide Inner Plate $14 Suits Allis Agco Open Fronts Original Part: MW20327 Retractable Finger Guide Outer Plate $14 Suits Allis Agco Open Fronts Original Part: MW20323 Retractable Finger Guide Nylon $10 Suits Allis Agco Open Fronts Original Part: Accelerator Rolls ARN-24 Accelerator Rollers Bolt on type $50 ea 16 required for R40, 50, 42, required for R60, 62, 70, 72 OEM quality Rubber Suits Agco R60, R70, R42, R52, R62, R72 Original Part: ARN-SS Stainless Steel Accelerator Roll Set of 8 $1100 set Alternative to rubber Suits Agco R60, R70, R62, R72 Original Part: ARN-SS7 Stainless Steel Accelerator Roll Set of 10 $1375 set Alternative to rubber Suits Agco S7 Original Part: NEW HPAC-1181 Tube with Hub, Rotor Gearbox $700 Suits Allis N5, N6, N7, R60, R62, R70, R72 Original Part: ARN-SS50 Stainless Steel Accelerator Roll Full Set $800 set Alternative to rubber Suits Agco R40, R50, R42, R52 Original Part: Hay Loader Tynes Order No. Description/APPLICATION PRICE TP77017 Conus 2 Taper 980mm long $120 TP77035 Conus 2 Taper 1100mm long $122 TP77018 Conus 2 Taper 1250mm long $125 TP77019 Conus 2 Taper 1400mm long $140 TP1841 Conus 2 weld in mounting sleeve $26 82 Prices exclude GST (08)

85 Attaching Brackets - 2 way s, GPS and Screens. Suits John Deere Tractors and Headers GPS Combo Brackets AFG02 GPS Combo Bracket $242 Suits: Tractors 7200R, 7215R, 7230R, 7260R, 7280R, 8225R, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 9410R, 9460R, 9510R, 9560R Suits John Deere S660, S670, S680, S690 Headers AFG03 GPS Combo Bracket Kit $270 Consists of AFG02 Bracket as above plus adaptors Suits 00, 10, 20 and 30 Series 8000 and 9000 Tractors and SP John Deere Sprayers AFG01 GPS Adaptor Bracket $178 Converts original Greenstar Bracket to accept starfire with deluxe shroud. Suits 7000 to 7930 inclusive - John Deere tractors, windrowers and conditioners, and headers 9650STS to 9870STS inclusive Headers Display Screen Brackets AFD02 Display Screen Bracket $282 Suits John Deere S660, S670, S680, S690 Headers AFD03 Display Screen Bracket $241 Suits all John Deere tractors ending with 00, 10, 20 or 30 all 8000 and 9000 series tractors, all 7R, 8R and 9R tractors and John Deere sprayers 2 Way Radio Brackets Features Simple & clean install, bolting to integrated factory cab mounting holes Easy access to volume & other radio controls Mobile - easily moved from tractor to tractor AFR01 2 Way Radio Bracket $178 Suits John Deere 8100 to 8630 inclusive Tractors, 9100 to 9630 inclusive Tractors, 4730 to 4940inclusive Tractors, All with Command View cab Mounted on rear right cornerpost Farm inspired custom fit design integrates with cab design Powder coated durable paint finish AFR04 2 Way Bracket $178 Suits John Deere S660, S670, S680, S690 Headers AFR02 2 Way Radio Bracket $178 Suits John Deere 7200R, 7215R, 7230R, 7260R, 7280R, 8225R, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 9410R, 9460R, 9510R, 9560R tractors including track versions AFM01 Microphone Holder $38 Suits all tractor and header cabs (08) Prices exclude GST 83

86 Sorghum and Sunflower Trays Sorghum Trays Please call for details and price With Adjustable Mounting Brackets to adapt to all makes and models Sunflower Trays Please call for details and price With Adjustable Mounting Brackets to adapt to all makes and models 84 Prices exclude GST (08)

87 parts return policy 1. Within 30 days of invoice date - No penalty (provided our suppliers don t charge a penalty) days plus of invoice date - A restocking fee may be charged depending on circumstances. 3. After 90 days - Non-refundable. Special Buy-in items or made to order items are non-refundable. Tractor Parts Catalogue For a full range of Tractor Parts see our Catalogue PHONE: FAX: warranty Harvestaire warrant that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which it proves to be defective in material or workmanship within a period of one year for new parts from the date of original purchase. Warranty service can be obtained by returning any defective product to Harvestaire. A purchase receipt or other proof of original purchase may be required before warranty service is rendered. If found defective under the terms of this warranty, repair or replacement will be made, without charge, together with a refund for transportation costs. If found not to be defective you will be notified and, with your consent, returned to you at your expense. The warranty covers normal use and does not cover damage or defect which results from alteration, accident, neglect or improper installation, operation or maintenance. Harvestaire s obligation under this warranty is limited to the repair of replacement of the defective product (up to maximum purchase price). Harvestaire neither assumes or authorises any other person to give any other warranty or to assume any other obligation or liability on its behalf. Parts in this catalogue are not manufactured by the Original Equipment Manufacturer. Original Equipment Manufacturers names, part numbers and descriptions are quoted for reference purposes only.

88 PHONE: FAX: Mumford Place, Balcatta, Western Australia