Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG

Transcription

1 Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG with Adapters for: Model 7000 Self-Propelled Windrower Model 9000 Self-Propelled Windrower John Deere 7720, 8820, 9500, 9600 and CTS Combines Case IH 1460, 1660, 1480 and 1680 Combines Gleaner R60, R70, R6, R7, 1982 and up N6 and N7 Combines Massey Ferguson 860, 8570, 8450 and 8460 Combines Ford New Holland TR and TX Combines Claas 96, 106, 98 and 108 Combines Ford-Versatile 9030 Bi-Directional Tractor (Offset Mount) 680 Moray Street 9700 NW Conant Avenue Winnipeg, Manitoba R3J 3S3 Kansas City, Missouri (204) , Fax (816) , Fax

2 The Quiet Leader Issue 08/04 Sugg. Retail: $15.00 Printed in Canada

3 1 Model 960 HARVEST HEADER PARTS CATALOG HEADER MAIN FRAME, LIGHTS & ATTACHMENTS... 2, 3 DRAPER DRIVE HYDRAULICS: DOUBLE DELIVERY HEADERS... 4, 5 DRAPER DRIVE HYDRAULICS: TRIPLE DELIVERY HEADERS... 6, 7 REEL LIFT AND DRIVE HYDRAULICS: 21', 25', & 30' HEADERS B REEL LIFT AND DRIVE HYDRAULICS: 36' HEADER... 10, 11 DRIVELINE DRIVE SHAFT... 12B, 13 SICKLE AND DRIVE... 14, 15 KNIFE HEAD (PARTS BULLETIN) & KNIFE HEAD REPLACEMENT CHART... 15A, 15B SICKLE DRIVE BOX... 16, 17 DRAPERS DRAPER CARRIER DECKS & SHIFT GROUP DRAPER ROLLERS & TIGHTENER ASSEMBLY (LONG DECKS) DRAPER ROLLERS & TIGHTENER ASSEMBLY (TRIPLE DELIVERY SHORT DECK) REEL DRIVE & SUPPORT ARMS... 22, 23 BAT REEL... 24, 25 OPTIONS & ACCESSORIES: GAUGE WHEEL / TRANSPORT OPTION: 30 & 36' B GAUGE WHEELS (NO TRANSPORT): 30 & 36'... 28, 29 SKID SHOES & TERRACE SKID SHOE WINDROWER ADAPTERS WINDROWER ADAPTER GROUP: MODELS 7000 & HEADER to 7000 TRACTOR: ADAPTER... 32, HEADER to 7000 TRACTOR: AUXILIARY FLOAT SPRING HEADER to 7000 TRACTOR: DRIVELINE COMBINE ADAPTERS FRAME & FLOAT ASSEMBLY MOUNTING & SPECIAL PARTS... 40, 41 DRAPER DRIVE HYDRAULICS... 42, 43 REEL LIFT & REEL DRIVE FITTINGS B DRIVE CASE... 46, 47 DRIVE CASE: CLAAS & MF 860/8450/ , 49 FEEDER DRAPER DRIVELINE B INPUT DRIVELINES... 52, 53 FEEDER DRAPER GROUP B CROSS AUGER... 58, 59 DECALS, REFLECTORS & PAINT HEADER... 60, 61 PRODUCT IDENTIFICATION... 62, 63 COMBINE ADAPTER... 62, 63 PAINT KITS HYDRAULIC REEL FORE-AFT: 21', 25', & 30'... 64, 65 HYDRAULIC REEL FORE-AFT: 36'... 66, 67 HEAVY DUTY DRAPER DRIVE... 67A, 67B 9030 BI-DIRECTIONAL OFFSET MOUNT ADAPTER FRAME & FLOAT GROUP... 68, 69 WHEEL ASSEMBLY... 70, 71 HYDRAULICS: SERIAL NO AND BELOW... 72, 73 HYDRAULICS: SERIAL NO TO , 75 HYDRAULICS: SERIAL NO AND ABOVE... 76, 77 ELECTRICAL DECALS & REFLECTORS NUMERICAL LIST SUGGESTED STOCKING LIST ABBREVIATIONS: L/H - left hand (Determined from Operator's position, R/H - right hand facing forward.) I.D. - inside diameter O.D. - outside diameter A/R - as required (quantity varies with header size) REF - reference, part number called up elsewhere in catalog NC - national coarse thread NF - national fine thread NSS - not serviced separately COMBINE MODELS: JD - John Deere C-IH - Case IH GL - Gleaner MF - Massey Ferguson NH - New Holland TR & TX CL - Claas NOTE: Common hardware is not illustrated. Alphabetic references are used to designate position and description of these items. When ordering, be sure the complete and proper serial number is given. Some parts vary with header size; be sure you are ordering the correct number for your header. SERIAL BREAKS: Example: Used on machines up to and including serial number Used on machines including and after serial number

4 2 MAIN FRAME LIGHTS & ATTACHMENTS

5 3 MAIN FRAME, LIGHTS & ATTACHMENTS REF PART DESCRIPTION QTY SERIAL 1 REF FRAME - main, not serviced BAR - guard, repair piece 1500 mm long (5 ft.) TUBE - back, repair piece 1500 mm long (5 ft.) SUPPORT sliding deck, repair piece, 1590 mm long (5.2 ft.) CUTTERBAR - repair piece 1500 mm long (5 ft.) DEFLECTOR - left side (not exactly as shown) DEFLECTOR - left side DEFLECTOR - right side (not exactly as shown) DEFLECTOR - right side (not exactly as shown) DEFLECTOR - right side SHOE - divider, left SHOE - divider, right RETAINER - header lock pin PIN - "L", header lock SHIELD - wobble box SHIELD - left side with decals LIGHT - amber HARNESS - wiring, 21 ft. Double Delivery HARNESS - wiring, 25 ft. Double Delivery HARNESS - wiring, 30 ft. Double Delivery HARNESS - wiring, 36 ft. Double Delivery HARNESS - wiring, 21 ft. Triple Delivery HARNESS - wiring, 25 ft. Triple Delivery HARNESS - wiring, 30 ft. Triple Delivery A CONNECTOR KIT - 3-way, includes male and female plugs FASTENER - nylon tie... A/R STAND - 21', 25' & 30' w/o gauge wheels PIN - "L" PIN - hair SUPPORT - sickle drive box (welded)... 1 NOTE: Also required Welding Jig - TO BE RETURNED 21 B 2301 KIT - header lifting arm, (kit available through WholeGoods only) BRACKET - lift PIN - clevis, 3/4 x 3-1/4 inch PIN - hair SEAL - sponge LATCH - rubber GUARD - light... 2 A BOLT - round hd. square nk. 3/8 NC x 3/4 inch B NUT - lock, smooth flange, 3/8 inch NC distorted thread C BOLT - round hd. square nk. 3/8 NC x 1 inch E NUT - lock, 3/8 inch NC distorted thread F BOLT - flange head, 3/8 NC x 3/4 inch H WASHER - lock, 1/2 inch J 6771 NUT - hex, 1/2 inch NF K BOLT - hex head, 3/8 NC x 1 inch L WASHER - lock, 3/8 inch M BOLT - round head square neck, 3/8 NC x 1-3/4 inch N NUT - hex, 3/8 NC P BOLT - hex head, 3/8 NC x 3/4 inch

6 4 DRAPER DRIVE: DOUBLE DELIVERY HEADERS NOTE: See page 67A for Heavy Duty Draper Drive Kit Option.

7 5 DRAPER DRIVE: DOUBLE DELIVERY HEADERS REF PART DESCRIPTION QTY SERIAL COUPLER - female O-RING - for coupler HOSE - to left draper motor: 25' HOSE - to left draper motor: 30' & 36' HOSE - to left draper motor: 21' HOSE - to left draper motor: 25' HOSE - to left draper motor: 30' & 36' LINE - left side: 30' LINE - left side: 36' HOSE - left draper motor, 30' & 36' HOLDER - hose... A/R HOLDER - hose... A/R HOSE - from left draper motor: 21' HOSE - from left draper motor: 25' HOSE - from left draper motor: 30' & 36' LINE - to right side FITTING - union, 5/8 tube LINE - right side: 21' LINE - right side: 25' LINE - right side: 30' LINE - right side: 36' HOSE - right draper motor: 21', 25' & 30' HOSE - right draper motor: 36' MOTOR - draper drive, with key SEAL KIT - for motor (was )... qty. per motor HOSE - draper flow return HOSE - draper flow return COUPLER - male WASHER - formed PAD - rubber HOLDER - hose FITTING - elbow, 5/8 tube x 5/8 tube E NUT - lock, smooth flange, 3/8 NC distorted thread G BOLT - round head, square neck, 3/8 NC x 1-1/4 inch H BOLT - round head, square neck, 3/8 NC x 1-3/4 inch J BOLT - round head, square neck, 3/8 NC x 3/4 inch ~ f REF Indicates where hardware passes through frame member.

8 6 DRAPER DRIVE: TRIPLE DELIVERY HEADERS NOTE: See page 67A for Heavy Duty Draper Drive Kit Option. NOTE: Short deck draper drive motor (at right end of header) is driven through the reel drive circuit. See "Reel Lift & Drive", page 9A & 9B.

9 7 DRAPER DRIVE: TRIPLE DELIVERY HEADERS REF PART DESCRIPTION QTY SERIAL VALVE - four way COIL - for valve qty. per valve O-RING - for valve qty. per valve HOSE - pressure to L/H valve HOSE - pressure to L/H valve COUPLER - female O-RING - for coupler FITTING - adapter, 5/8 tube x 9/16 O-ring & FITTING - adapter, 1/2 NPT x 9/16 O-ring HOSE - from left hand valve FITTING - tee, 1/2 tube x 3/4 O-ring FITTING - plug, 3/4 O-ring FITTING - plug, 9/16 O-ring LINE - to top port of L/H deck shift motor FITTING - adapter, 1/2 tube x 7/8 O-ring LINE - to bottom port of L/H deck shift motor MOTOR - deck shift, with key SEAL KIT - for motor (was )... qty. per motor HOSE - valve to draper motor: 21' HOSE - valve to draper motor: 25' HOSE - valve to line: 30' LINE - connector: 30' HOSE - to draper motor: 30' HOLDER - hose... A/R HOLDER - hose: 30' FITTING - union, 7/8 O-ring MOTOR - draper drive, with key SEAL KIT - for motor (was )... qty. per motor VALVE - sequence, complete - includes items 21 to BALL - sequence valve SPACER - sequence valve WASHER - special PIN - dowel PIN - dowel HOSE - valve to draper motor: 21' HOSE - valve to draper motor: 25' HOSE - valve to line: 30' LINE - connector FITTING - adapter, 5/8 tube x 9/16 O-ring FITTING - adapter, 5/8 tube x 3/4 O-ring LINE - to top port of R/H deck shift motor LINE - to bottom port of R/H deck shift motor LINE - connector HOSE - draper flow return HOSE - draper flow return COUPLER - male PAD - foam rubber FITTING - elbow, 5/8 tube x 5/8 tube HOLDER - hose M BOLT - round head, square neck, 3/8 NC x 3 inch N NUT - lock, smooth flange, 3/8 NC distorted thread P BOLT - round head, square neck, 3/8 NC x 1-1/4 inch R BOLT - round head, square neck, 3/8 NC x 1-3/4 inch ~ f REF Indicates where hardware passes through frame member.

10 8 REEL LIFT & DRIVE - 21', 25', & 30' Serial No and below (For S.N & Up, see page 9A, 9B)

11 9 REEL LIFT & DRIVE - 21', 25', & 30' Serial No and below REF PART DESCRIPTION QTY SERIAL LINE - reel lift, connector: 25' LINE - reel lift, connector: 30' LINE - reel drive: 21' LINE - reel drive: 25' LINE - reel drive: 30' REF HARNESS - wiring, see "Main Frame, Lights, and Attachments LINE - reel lift, to right cylinder: 21' LINE - reel lift, to right cylinder: 25' LINE - reel lift, to right cylinder: 30' HOSE - return from short deck motor: TD headers HOSE - return from reel drive motor: DD headers... 1 (connects to LINE, item 2) HOSE - return from reel drive motor: TD headers... 1 (connects to short deck MOTOR, item 33) FITTING - adapter, short deck motor CONDUIT - hose protector: 21' CONDUIT - hose protector: 25' CONDUIT - hose protector: 30' HOSE - pressure to reel drive motor FITTING - union, hydraulic line... A/R LINE - reel lift, to cylinder HOSE - reel lift cylinder HOSE - right reel lift cylinder CYLINDER - double acting, reel lift SEAL KIT - for cylinder PISTON - for cylinder (also order Seal Kit 21494) CYLINDER - single acting, reel lift SEAL KIT - for cylinder FITTING - elbow, 90, reel lift cylinder CLEVIS - cylinder adjusting PIN - clevis, reel lift cylinder SPACER - cylinder rod PIN - cotter, 3/16 dia. x 1-1/4 inch CONDUIT - hose protector HOLDER - hose HOSE - reel drive HOSE - reel lift REF COUPLER - see Windrower or Combine Adapter Hydraulics FASTENER - plastic tie GUIDE - reel drive hoses HOLDER - hose... A/R HOLDER - hose... A/R 32 REF DRIVE ASSEMBLY - see "Reel Drive & Support Arms" REF MOTOR - short deck, see "Draper Rollers & Tightener Assembly" MOTOR - reel drive, c/w key KEY - Woodruff, SAE #15, for motor SEAL KIT - for motor (was )... 1 A BOLT - round head, square neck, 3/8 NC x 1-1/2 inch B NUT - lock, smooth flange, 3/8 NC distorted thread C BOLT - round head, square neck, 5/8 NC x 3-1/2 inch D WASHER - flat, 21/32 inch ID E NUT - lock, 5/8 NC distorted thread F BOLT - round head, square neck, 3/8 NC x 2 inch G NUT - lock, 1/2 NC distorted thread H BOLT - round head, square neck, 3/8 NC x 3/4 inch

12 9 A REEL LIFT & REEL DRIVE HYDRAULICS - 21', 25', & 30' Serial No and above

13 REEL LIFT & REEL DRIVE HYDRAULICS - 21', 25', & 30' Serial No and above 9 B REF PART DESCRIPTION QTY SERIAL 1 REF HOSE - to reel lift line, see Adapter Hydraulics for your Windrower or Combine LINE - reel lift, to left cylinder: 21' LINE - reel lift, to left cylinder: 21' LINE - reel lift, to left cylinder: 25' LINE - reel lift, to left cylinder: 25' LINE - reel lift, to left cylinder: 30' LINE - reel lift, to left cylinder: 30' CLAMP - reel lift line CLIP - nylon, hose... see note (1) HOSE - reel lift cylinder FITTING - 90 elbow, 9/16 O-ring x 3/8 tube CYLINDER - double acting, reel lift (see page 11, Note 2 for details) (was 29169) SEAL KIT - for cylinder SEAL KIT for cylinder (see page 11, Note 2 for details) PISTON - for cylinder (also order Seal Kit 21494) HOSE - left reel lift cylinder HOLDER - hose, steel... see note (3) HOLDER - hose, plastic LINE - reel lift, to cylinder FITTING - 3/8 tube union... see note (2) LINE - reel lift, connector: 25' LINE - reel lift, connector: 30' CYLINDER - single acting, reel lift SEAL KIT - for cylinder CLEVIS - cylinder adjusting CLEVIS cylinder adjusting, with bolt PIN - clevis, reel lift cylinder SPACER - cylinder rod PIN - cotter, 3/16 x 1-1/4 inch FITTING - male quick coupler, 1/2 NPT CAP - dust, for male coupler WASHER - formed FITTING - female quick coupler, 1/2 NPT O-RING - for coupler PLUG - dust, for female coupler HOLDER - hose coupler HOSE - reel drive LINE - reel drive: 21' LINE - reel drive: 25' LINE - reel drive: 30' HOSE - pressure to reel drive motor (top port) MOTOR - reel drive, c/w key: except "Rice Special" MOTOR - reel drive, c/w key: "Rice Special" KEY - Woodruff, SAE #15, for motor or SEAL KIT - for motor or (was or ) HOSE - return from reel drive motor: Double Delivery Headers... 1 (connects to LINE, item 26) HOSE - return from reel drive motor: Triple Delivery Headers... 1 (connects to short deck MOTOR, item 33) GUIDE - reel drive hoses CONDUIT - hose protector FITTING - adapter, 1/2 tube x 7/8 O-ring MOTOR - short deck draper drive, with key HOSE - return from short deck motor: Triple Delivery Headers RESTRICTOR - flow (to slow reel lift & drop rate, install in bottom port of item 7)... 1 K NUT hex, 5/8 NC L BOLT - round head, square neck, 3/8 NC x 1-1/2 inch N NUT - lock, smooth flange, 3/8 NC distorted thread P BOLT - round head, square neck, 5/8 NC x 3-1/2 inch R WASHER - flat, 21/32 inch ID S NUT - lock, 5/8 NC distorted thread T BOLT - round head, square neck, 3/8 NC x 1-3/4 inch V NUT - lock, 1/2 NC distorted thread X BOLT - round head, square neck, 3/8 NC x 3/4 inch ~ f REF Indicates where hardware passes through frame member. NOTES: (1) - Quantities: 21'= 1 / 25'= 3 / 30'= 4 (2) - Quantities: 21'= 1 / 25'= 2 / 30'= 2 (3) - Quantities: 21'= 6 / 25'= 7 / 30'= 8

14 10 REEL LIFT & REEL DRIVE HYDRAULICS - 36'

15 REEL LIFT & REEL DRIVE HYDRAULICS - 36' 11 REF PART DESCRIPTION QTY SERIAL 1 REF HOSE - to reel lift, see Adapter Hydraulics for Windrower or Combine HOSE - reel lift, to center cylinder HOSE - reel lift, to center cylinder HOSE - reel lift, to center cylinder CONDUIT - hose protector CYLINDER - double acting, center reel lift (was 32415)... 1 see notes 1 & SEAL KIT - for cylinder 32415, see note SEAL KIT for cylinder or , see note CLEVIS - center cylinder adjusting PIN - clevis, 3/4 x 3-3/4 inch effective length PIN - clevis, 5/8 x 3-1/4 inch effective length FITTING - 90 elbow, 9/16 O-ring x 3/8 tube HOSE - reel lift, from center cylinder LINE - reel lift, from center cylinder FITTING - 3/8 tube union LINE - reel lift HOSE - reel lift, to cylinder lower port CYLINDER - double acting, R/H reel lift (was 29169) SEAL KIT - for cylinder SEAL KIT for cylinder or , see note PISTON - for cylinder (also order Seal Kit 21494) CLEVIS - L/H and R/H cylinder adjusting CLEVIS - L/H and R/H cylinder adjusting, with bolt HOSE - reel lift, from R/H cylinder upper port HOLDER - hose, plastic HOLDER - hose, steel LINE - reel lift, connector CYLINDER - single acting, L/H reel lift SEAL KIT - for cylinder PIN - clevis, 5/8 x 2-1/2 inch effective length SPACER - cylinder rod FITTING - male quick coupler, 1/2 NPT CAP - dust, for male coupler WASHER - formed HOLDER - hose couplers HOLDER - hose couplers HOSE - reel drive HOSE - reel drive HOSE - reel drive MOTOR - reel drive, with key KEY - Woodruff, SAE #15, for motor SEAL KIT - for motor (was ) FITTING - female quick coupler, 1/2 NPT O-RING - for coupler PLUG - dust, for female coupler CLIP - nylon, 1/2 I.D. (for reel lift hose) CLIP - nylon, 3/8 I.D. (for wiring harness at R/H end panel) RESTRICTOR - flow (to slow reel lift & drop rate, install in bottom port of item 4) FITTING - 90 elbow, 5/8 tube x 1/2 NPT SPACER cylinder mount, see note G WASHER - flat, 13/16 inch I.D. H PIN - cotter, 3/16 x 1-1/4 inch J Nut lock, smooth flange, 3/8 NC distorted thread K NUT - hex, 5/8 NC L NUT - hex jam, 5/8 NC M BOLT - round head, square neck, 5/8 NC x 3-1/2 inch N WASHER - flat, 21/32 inch I.D. P NUT - lock, 5/8 NC distorted thread S BOLT - round head, square neck, 3/8 NC x 1-3/4 inch T NUT - lock, smooth flange, 3/8 NC distorted thread V BOLT - round head, square neck, 3/8 NC x 3/4 inch ~ f REF Indicates where hardware passes through frame member NOTES: 1.) If replacing cylinder (with 5/8 hole in cylinder rod) with cylinder (with 3/4 hole in cylinder rod) also order spacer item ) When ordering seal kit for double-acting cylinders (item 4 & 14), determine which kit you need as follows: Newer cylinders and are identified by an ID sticker marked with the part no. If your cylinder has this ID sticker, order seal kit If there is no ID sticker, order seal kit

16 12 DRIVELINE REF PART DESCRIPTION QTY SERIAL DRIVELINE - complete, includes items 10 and YOKE - left end, 1-3/16 bore CROSS & BEARING KIT NSS YOKE & SHAFT (order 43708) SHIELD - outer, with decal BEARING - shield, consists of two halves (Walterscheid) BEARING KIT - shield (Weasler) SHIELD - inner SHIELD - inner, special (Walterscheid) * SHIELD - inner, special (Weasler) * SUPPORT - shield (Walterscheid) NSS YOKE & TUBE (order item 11) YOKE - spline bore, 1-3/8 x 21 teeth, with slide collar YOKE - spline bore, 1-3/8 x 21 teeth, clamp type... OPT YOKE for keyed shaft... OPT JOINT ASSEMBLY - male half, includes items 1,2,3,4, JOINT ASSEMBLY - female half, includes items 2,5,6,7,8, JOINT ASS"Y. - special *... 1 A SCREW - set, square head, cup point, 3/8 NC x 1 inch B NUT - hex jam, 3/8 NC * NOTE: Use with 21 header on JD, NH, CL, MF 860/8450/8460 Combines

17 12 A

18 12 B DRIVE SHAFT ASSEMBLY

19 13 DRIVE SHAFT ASSEMBLY REF PART DESCRIPTION QTY SERIAL BUSHING - split taper PULLEY - sickle, driver SHAFT - drive, 21' header SHAFT - drive, 25' header SHAFT - drive, 30' header SHAFT - drive, 36' header KEY - woodruff, SAE # BEARING - ball, with collar (qty. = 3 for 36') FLANGE - bearing FLANGE - bearing, with lube fitting PLATE - L/H bearing support, outer BRACKET - tightener PLATE - L/H bearing support, inner TUBE - shield, 21' header TUBE - shield, 21' header TUBE - shield, 25' header TUBE - shield, 25' header TUBE - shield, 30' header TUBE - shield, 30' header TUBE - shield, 36' header PLATE - R/H bearing support SHIELD - driveline INSULATOR - rubber, 36' center bearing DISC - flywheel PULLEY - sickle, driver BUSHING - split taper A BOLT - hex head, 3/8 NC x 3-1/2 inch, thread full length D WASHER - flat, 13/32 inch I.D. E BOLT - hex head, 3/8 NC x 1-1/4 inch H NUT - lock, smooth flange, 3/8 NC distorted thread J BOLT - hex head, 3/8 NC x 3/4 inch K BOLT - round head, square neck, 3/8 NC x 3/4 inch L WASHER - lock, 3/8 inch M NUT - hex, 3/8 NC N BOLT - hex head, 3/8 NC x 2-1/4 inch P NUT - lock, 3/8 NC distorted thread R BOLT - hex head, 5/16 NC x 1-1/4 inch ~ f REF Indicates where hardware passes through frame member.

20 14 SICKLE AND DRIVE

21 SICKLE AND DRIVE 15 REF PART DESCRIPTION QTY SERIAL SPECIAL SICKLE GUARD - first left end SICKLE GUARD - except 3 above... A/R SICKLE ASS'Y. - less head: 21' complete, 25' L/H, 30' L/H & 36' L/H (includes item 29) SCREW - rib neck, #12 NC x 5/8 inch... A/R SICKLE ASSEMBLY - right hand, 25' (4 ft. extension) SICKLE ASSEMBLY - right hand, 30' (9 ft. extension) SICKLE ASSEMBLY - right hand, 36' (15 ft. extension) BAR - splice, 12 hole (not required for 21') SECTION - sickle, top-serrated... A/R SECTION - sickle, left half SECTION - sickle, right half SCREW - rib neck, #12 NC x.92 inch (qty. 6 for 21') NUT - lock, #12 NC distorted thread... A/R SCREW - rib neck, #12 NC x 1-1/8 inch REF DRIVE - sickle, see next page ARM - drive REF WASHER - flat, see next page PIN - cotter, 3/16 x 1-1/4 inch PIN - sickle head (was 26321) FITTING - lubrication, PULLEY - driven HEAD ASSEMBLY - sickle (includes items 20 & 21) HEAD ASSEMBLY sickle (complete), (see page 15A & 15B)... OPT BEARING - needle SEAL - sickle head (install with lip facing outward) BELT - sickle drive BELT - sickle drive, notched GUIDE - sickle, hold-down... A/R GUIDE - sickle, high clearance hold-down (qty. 1 for 21') (may sub 49420) (used at fourth guard from L/H end and at splice bar (4) if applicable) GUIDE - belt (was 43631) TOOL - guard straightening, (Accessory) GUIDE - adjustable sickle hold-down, with bolt (Optional)... A/R BOLT - hex head, 3/8 NC x 3/4 inch, stainless steel STRAP - reinforcing BAR - reinforcing, package of B 8218 BOLT round head, square neck, 7/16 NC x 1-1/2 inch C NUT - hex, 7/16 NC D BOLT - hex head, 5/8 NF x 2 in Gr. 8 E REF NUT - slotted hex, see next page F BOLT - hex head, 5/8 NC x 2-3/4 inch G NUT - lock, 5/8 NC distorted thread H NUT - hex, 5/8 NC J NUT hex, 3/8 NC, stainless steel K BOLT hex head, 3/8 NC x 3/4 inch, stainless steel NOTE: For a complete sickle, order: 25', 30' & 36' L/H Assembly * R/H Assembly Bar, splice Section, sickle Section, left half Screw, #12 x Nut, lock Strap, reinforcing... 1 *Part No. varies by header size. Order appropriate number from Ref. 4 above.

22 15 A KNIFE HEAD REPLACEMENT

23 KNIFE HEAD REPLACEMENT CHART 15 B

24 16 SICKLE DRIVE BOX

25 SICKLE DRIVE BOX 17 REF PART DESCRIPTION QTY SERIAL DRIVE - sickle, complete (with mounting hardware)... 1 see Note WASHER - flat,.78 I.D. x 1-5/8 O.D. X 1/8 inch thk NUT - lock, 3/4 inch NC distorted thread COVER ASSEMBLY - includes items 5 & SEAL - oil BEARING - needle SHAFT - drive BEARING - cone NUT - stake, 1-15/16-20 hex spiral VALVE - relief FITTING - reducer bushing, 3/8 x 1/8 pipe thread HOUSING ASSEMBLY - includes items 14, 15 and mounting bolts PLUG - 3/8 NPT SEAL - oil BEARING - needle O-RING 2-5/8 x 2-7/8 x 1/8 inch CAP ASSEMBLY - includes items 20 & BEARING - needle SEAL - oil YOKE/HOUSING ASSEMBLY, includes items (see Notes 1 & 2) YOKE/HOUSING ASSEMBLY, includes items 7-9 and NSS YOKE - output, with bushings (order item 24) NSS BUSHING - bronze (order item 24) NSS SPINDLE (order item 24) BEARING - cup NSS PLUG - nylon, 7/8 dia. x 1/64 inch thk. (order item 24) NSS HOUSING - bearing (order item 24) WASHER - flat, for 3/4 NC thread (see Note 1) WASHER - flat, for 7/8 NF thread (see Note 1) NUT - slotted hex, 3/4 NC (see Note 1) NUT - slotted hex, 7/8 NF (see Note 1) BOLT - flange head, 5/16 NC x 1 inch... 6 NSS Not Serviced Separately NOTES: 1. Starting with 1996 production, a running change is taking place that increases yoke thread size from 3/4 NC to 7/8 NF. 2. Starting in 1998, stock of will not be replenished, and will be superseded by when stock is depleted.

26 18 DRAPERS

27 DRAPERS 18 A REF DELUXE** ECONOMY* DESCRIPTION QTY SERIAL DRAPER DRAPER 1 21 ft. Double Delivery DRAPER - left side DRAPER - right side ft. Double Delivery DRAPER - left side DRAPER - right side ft. Double Delivery DRAPER - left side (sub with ) DRAPER - right side (sub with ) ft. Double Delivery DRAPER - left side (sub with ) DRAPER - right side (sub with ) ft. Triple Delivery: DRAPER - right and left side ft. Triple Delivery: DRAPER - right and left side ft. Triple Delivery: DRAPER - right and left side... 2 All Triple Delivery Headers: DRAPER - short deck at R/H end of header DRAPER - short deck at R/H end of header DRAPER - side draper extension piece, 15 in. (380 mm) long... A/R DRAPER - bulk roll, deluxe** ft. (45.7 m) (was 43994) A/R DRAPER - bulk roll, economy* - 75 ft. (22.9 m)... A/R SLAT - connector kit, includes 2 slats & hardware... A/R SLAT - connector kit, includes 2 slats & hardware... A/R J NSS SCREW - machine, round Phillips head, #10 NC x 1-1/4 inch L NSS NUT - hex, #10 NC PACKAGE - hardware, includes 12 each of items J and L NOTES: * Economy drapers are a lower priced option to the deluxe drapers supplied with a new header. Economy drapers are friction coated with rubber on both sides. Bulk rolls have no holes and no connector. ** Deluxe drapers are standard equipment on new headers. These are skim coated with inch thick rubber on cleat side and friction coated with rubber on side opposite cleats. Bulk rolls have no holes and no connector.

28 18 B DRAPER CARRIER DECKS & SHIFT GROUP

29 DRAPER CARRIER DECKS & SHIFT GROUP 19 REF PART DESCRIPTION QTY SERIAL CARRIER DECK - left, 21' Triple Delivery (TD) & Double Delivery (DD)... 1 TD- all, DD CARRIER DECK - left, 21' DD CARRIER DECK - left, 25' TD & DD... 1 TD- all, DD CARRIER DECK - left, 25' DD CARRIER DECK - left, 30' TD & DD... 1 TD- all, DD CARRIER DECK - left, 30' DD CARRIER DECK - left, 36' DD CARRIER DECK - left, 36' DD CARRIER DECK - right, 21' TD CARRIER DECK - right, 25' TD CARRIER DECK - right, 30' TD SUPPORT - front, 24" (610 mm) - all headers... 1 TD- all, DD SUPPORT - front, 63" (1600 mm) - 21' header... 2 TD- all, DD SUPPORT - front, 87" (2210 mm) - 25' header... 2 TD- all, DD SUPPORT - front, 93" (2365 mm) - all headers... 1 TD- all, DD SUPPORT - front, 117" (2970 mm) - 30' header... 2 TD- all, DD SUPPORT - front, 153" (3885 mm) - 36' DD header RETAINER - front deck support, used with item 2... see note (1) TD- all, DD FLAP - plastic, "Rice Special" Headers only WASHER - flat, 21/32 inch I.D., "Rice Special" Headers only... see note (2) PLATE - top guide, left deck, DD Headers only PLATE - top guide, left deck, DD Headers only GUIDE - top, TD Headers only DRAPER SEAL - front, removable - center section - all DD headers DRAPER SEAL - front, removable - end section - 21' DD header DRAPER SEAL - front, removable - end section - 25' DD header DRAPER SEAL - front, removable - end section - 30' DD header DRAPER SEAL - front, removable - end section - 36' DD header RETAINER - draper seal, used with item 8... see note (3) DEFLECTOR - crop DD headers only Deck shift components 11 to 20 - TD Headers only ANCHOR - chain, L/H deck ANCHOR - chain, R/H deck STOP - chain support CHAIN - deck shift (includes two of item 14), 21' header CHAIN - deck shift (includes two of item 14), 25' header CHAIN - deck shift (includes two of item 14), 30' header LINK - connector, spring clip type STOP - chain, (was 43593) STUD - chain anchor WASHER - flat MOTOR - deck shift, includes item SEAL KIT - for motor (was ) KEY - woodruff, SAE # SPROCKET - deck shift... 2 E BOLT - hex head, 1/4 NC x 3/4 inch H WASHER - lock, 1/4 inch K BOLT - hex head, 3/8 NC x 3/4 inch L WASHER - lock, 3/8 inch N BOLT - hex head, 1/4 NC x 1-1/4 inch P NUT - serrated flange head, 1/4 NC R BOLT rnd hd sq nk 3/8 NC x 1 in. S BOLT - round hd, square neck, 3/8 NC x 3/4 in T NUT - lock, smooth flange, 3/8 NC V WASHER - flat, 21/32 inch I.D. W NUT - hex, 5/8 NC X NUT - hex jam, 5/8 NC ~ f REF Indicates where hardware passes through frame member. NOTES: (1) - Quantities for item 3: 21 ft. = 12, 21 ft. Rice Special = 13, 25 ft. = 14, 30 ft. = 16, 36 ft. = 20 (2) - Quantities for item 5: 21 ft. Rice Special = 2, 25 ft. Rice Special = 3 (3) - Quantities for item 9: 21 ft. = 14, 25 ft. = 17, 30 ft. = 18, 36 ft. = 22

30 20 DRAPER ROLLERS & TIGHTENER GROUP

31 DRAPER ROLLERS & TIGHTENER GROUP 21 REF PART DESCRIPTION QTY SERIAL NOTE: Quantities shown are per deck. For Double Delivery (DD) Headers x 2, Triple Delivery Headers (TD) x 3 (except as noted for short deck) ROLLER drive (was 43513) ROLLER - drive, with lagging... OPT MOTOR - draper drive, with key (item 3) SEAL KIT - for motor (was ) KEY - Woodruff, SAE # SPACER - motor mounting WASHER - flat BEARING - ball, drive roller SUPPORT - drive roller LAGGING KIT - includes 3 pieces, one kit per roller... A/R * TUBE - idler roller * SHAFT - idler roller RING - retaining, external * BEARING - ball, idler roller * WASHER - flat * SPACER - idler roller FITTING - lube, 1/4 NF FITTING - lube, 1/8 NPT SUPPORT - idler roller, long decks SPRING - compression RETAINER - spring CABLE - tightener, long decks: 21' L/H & R/H, 25' L/H & R/H, 30'DD R/H, 36' L/H & R/H CABLE - tightener, long decks: 21' L/H & R/H, 25' L/H & R/H, 30'DD R/H, 36' L/H & R/H CABLE - draper tightener, long decks: 30'TD L/H & R/H, 30'DD L/H CABLE - draper tightener, long decks: 30'TD L/H & R/H, 30'DD L/H ARM - draper tightener, long decks, includes item ARM - draper tightener, long decks, incl. item ANCHOR - draper tightener WASHER - flat BOLT - draper tightener STOP - deck, TD headers only SUPPORT - idler roller, TD header short deck ARM - draper tightener, TD header short deck, includes item ARM - draper tightener, TD header short deck, includes item CABLE - draper tightener, TD header short deck CABLE - draper tightener, TD header short deck SUPPORT - brace, long deck idler rollers (See Note 1 below) NUT - special TUBE - idler roller SHAFT - idler roller (See Note 2 below) BEARING - ball, idler roller GUIDE / BEARING RETAINER - idler roller, back end BEARING RETAINER - idler roller, front end WASHER - formed SUPPORT - idler roller SUPPORT - bracket, long deck idler rollers (See Note 1 below) WASHER - flat CLAMP - cable H SETSCREW - 3/8 NC x 5/16 inch J SETSCREW - through bore 3/8 NC x 3/16 inch K BOLT - hex hd, 3/8 NC x 1-1/2 inch L NUT - lock, smooth flange, 3/8 NC M BOLT - large flange hd, 3/8 NC x 1" N BOLT - rd. hd, sq. nk, 3/8 NC x 3/4" P * NUT - hex jam, 5/8 NC R BOLT - hex head, 5/8 NC x 1-1/2 inch S NUT - lock, 5/8 NC distorted thread T BOLT - hex head, 1/2 NC x 1 inch U NUT - lock, 1/2 NC distorted thread V BOLT - rnd hd, sq nk, 3/8 NC x 1" ~ f REF Indicates where hardware passes through frame member. NOTES: (1) - Items 28 and 37 are used with the following combines and are supplied with the combine adapter: Case IH, Gleaner, New Holland TR, and MF (2) - If replacement shaft is not available, substitute shaft plus nuts (2). * - Idler roller on units with serial number and below may be updated to revised design by ordering all items marked *

32 22 REEL DRIVE & SUPPORT ARMS

33 REEL DRIVE & SUPPORT ARMS 23 REF PART DESCRIPTION QTY SERIAL ARM - reel support PIN - clevis, 5/8 dia. x 3-1/4 inch BRACE - diagonal SPACER - tube SUPPORT - reel prop, left SUPPORT reel prop, right SUPPORT - reel (qty 2 on 36 ft.) SUPPORT - reel drive (includes items 9 & 10) SCREW - reel position (3 on 36') RING - retaining, internal BEARING - cup BEARING - cone SHAFT - reel drive KEY - reel drive shaft WASHER - flat SPROCKET - driven, 21, 25 & 30 ft SPROCKET - driven, 36 ft WASHER - flat SPROCKET - drive, hydraulic motor WASHER - flat CHAIN - roller, #60 x 40 links PIN - cotter, 3/16 x 1-1/4 inch SHIELD - reel drive, 21, 25 & 30' SHIELD - reel drive, 36 ft SHIM - reel drive sprocket (nominal quantity 4)... A/R PIN - clevis, 1/2 dia. x 2 inch ARM - center reel support, 36 ft PIN - clevis, 3/4 dia. x 3-3/4 inch HUB - with clevis, 36 ft. (1/2" holes in clevis) HUB - with clevis, 36 ft. (3/4" holes in clevis) SUPPORT - reel prop, 36' center REEL DRIVE ASSEMBLY - with motor - 21, 25 & 30' (except Rice Sp.) REEL DRIVE ASSEMBLY - with motor - Rice Special only SUPPORT - reel slope enhancement, Rice Special Headers EXTENSION - single acting cylinder EXTENSION - double acting cylinder PIN - cylinder extension WASHER - flat RETAINER - reel brace... 2 A BOLT - hex head, 1/2 NC x 3-1/2 inch B WASHER - lock, 1/2 inch C NUT - lock, 1/2 NC distorted thread D BOLT - hex head, 5/8 NC x 1-3/4 inch E WASHER - flat, 21/32 inch I.D. F BOLT - flange head, 3/8 NC x 3/4 inch G 5512 NUT - slotted, 3/4 NF H WASHER - lock, 5/8 inch J NUT - hex, 5/8 NC K BOLT - hex head, 3/8 NC x 2-3/4 inch L NUT - lock, smooth flange 3/8 NC distorted thread M BOLT - hex head, 1/2 NC x 4 inch N BOLT - hex head, 1/4 NC x 3/4 inch P BOLT - hex head, 5/8 NC x 3-1/2 inch Q WASHER - lock, 1/4 inch R NUT - hex jam, 5/8 NC S BOLT - round head, square neck, 1/4 NC x 3/4 inch T NUT - serrated flange lock, 1/4 NC U BOLT - hex head, 3/8 NC x 1 inch V WASHER - lock, 3/8 inch W BOLT - hex head, 5/8 NC x 2-1/2 inch X NUT - lock, 5/8 NC distorted thread Y BOLT - round head, square neck, 3/8 NC x 3/4 inch Z NUT - hex, 1/2 NC

34 24 BAT REEL

35 BAT REEL 25 REF PART DESCRIPTION QTY SERIAL TUBE - reel, 21 (see note 2) TUBE - reel, 21' TUBE - reel, 25' (see note 2) TUBE - reel, 25' TUBE - reel, 30' (see note 2) TUBE - reel, 30' TUBE - L/H reel, 36' (see note 2) TUBE - L/H reel, 36' TUBE - R/H reel, 36' (see note 2) TUBE - R/H reel, 36' (1/2" holes in clevis) TUBE - R/H reel, 36' (3/4" holes in clevis) BLOCK - connector, 36' only SPACER - 36' only, used with 1/2" hardware SUPPORT - reel, includes lube fitting (qty. 2 for 36') BUSHING - reel support (qty. 2 for 36') HOOK - retaining (qty. 2 for 36') WASHER - flat (qty. 2 for 36') ARM - reel... see note (1) BAT - reel, 21' BAT - reel, 25' BAT - reel, 30' BAT - reel, 36' SHIELD - reel end (qty. 20 for 36') REFLECTOR - reel end (qty. 2 for 36') FITTING - lube FITTING - lube, 90, 36' R/H only SUPPORT - reel, includes lube fitting (qty. 2 for 36') A BOLT - hex head, 1/2 NC x 3-1/2 inch BOLT - hex head, 3/4 NC x 3-1/2 inch D BOLT - round head, square neck, 3/8 NC x 3/4 inch E BOLT - round head, square neck, 3/8 NC x 3/4 inch - 21' & 36' BOLT - round head, square neck, 3/8 NC x 1-1/2 inch - 25' & 30' G BOLT - flange head, 3/8 NC x 1/2 inch H NUT - lock, smooth flange, 3/8 NC distorted thread J NUT - lock 1/2 NC distorted thread NUT side lock 3/4 NC distorted thread K WASHER - flat, 21/32 inch I.D. L BOLT - hex head, 5/8 NC x 2 inch NOTE (1) Reel arm quantity: 21' = 25 / 25' = 30 / 30' = 35 / 36' = 50 NOTE (2) May substitute new tube (those indicated Serial No ) with the following modifications: Also order ITEM and hardware K and L. OR Drill 0.66" hole in existing ITEM 5, beside rectangular slot but centered on the tube component of support weldment. Order new hardware K and L.

36 26 30' & 36' Headers: Gauge Wheels with Transport Option LEFT WHEEL SUPPORT, HITCH & ELECTRICAL

37 30' & 36' Headers: Gauge Wheels with Transport Option LEFT WHEEL SUPPORT, HITCH & ELECTRICAL 27 NOTES: For standard Gauge Wheel package (no transport option), see page 28. For wheel components see page 27A & 27B. Identify the production year of the transport package by checking the design of the right wheel beam (page 27A & 27B) REF PART DESCRIPTION QTY PROD'N YEAR SUPPORT - left wheel, with decals (not exactly as shown) SUPPORT - left wheel, with decals (not exactly as shown) SUPPORT - left wheel, with decals & lube fitting & up BUSHING - plastic TUBE - wheel support & up SUPPORT - spring & up SPRING - extension [qty. 4 (2 per side) for 36 headers with a... 2 pick up reel in combination with the model 960 combine adapter] PIN - front & up PIN - cotter, 1/4 x 2 inch & up SPINDLE - left wheel SPINDLE - left wheel & up RETAINER - spindle & up PIN - L (quantity 2 for '92 Production) PIN - hair HITCH - with decals & transport chain RETAINER - hitch storage & up WASHER - rubber & up HARNESS - wiring, hitch section, incl. 7-pole plug & 4-way connector HARNESS - wiring, header section, includes 4-way connector SUPPORT - red light LIGHT - red LIGHT - amber GUARD - amber light FASTENER - plastic tie, 7-1/2 inch FASTENER - plastic tie, 14-1/2 inch PLUG - 7 pole RECEPTACLE - 7 pole, for towing vehicle CONNECTOR KIT - harness, includes male and female connectors SUPPORT - spindle TUBE - wheel support (not exactly as shown) TUBE - wheel support BAR - spindle keeper BRACKET - tube support BRACKET - tube support (welded) FITTING - lube A NUT - lock, 5/8 NC distorted thread B BOLT - hex head, 5/8 NC x 3 inch C BOLT - round head, square neck, 3/8 NC x 1 inch D NUT - lock, smooth flange, 3/8 NC distorted thread E WASHER - lock, 1/2 inch I.D. F 6771 NUT - hex, 1/2 NF G BOLT - round head, square neck, 3/8 NC x 3/4 inch H BOLT - hex head, 1/2 NC x 3 inch BOLT - hex head, 1/2 NC x 1-1/4 inch J NUT - lock, 1/2 NC distorted thread K BOLT - hex head, 5/8 NC x 3 1/2 inch L BOLT - round head, square neck, 1/2 NC x 1 inch

38 27 A 30' & 36' Headers: Gauge Wheels with Transport Option RIGHT WHEEL SUPPORT & WHEEL COMPONENTS

39 27 B 30' & 36' Headers: Gauge Wheels with Transport Option RIGHT WHEEL SUPPORT & WHEEL COMPONENTS NOTES: For standard Gauge Wheel package (no transport option), see page 28. For parts common to both left and right wheel supports, but not shown here, see page 26 & 27. Identify the production year of the transport package by checking the design of the right wheel beam: Wheel beam has welded upper shaft (see item 25) Wheel beam has welded square pads (see item 26). Upper shaft is a bolt-on piece (item 27) & up - Wheel beam has welded upper shaft and two support plates (see item 2). If replacing 1993 brace bar (with welded pin), order items 18, 19, 20, 21 & 22. REF PART DESCRIPTION QTY PROD'N YEAR SUPPORT - right wheels, with decals (not exactly as shown) SUPPORT - right wheels, with decals (not exactly as shown) SUPPORT - right wheels, with decal & lube fitting & up BEAM - axle, right wheels & up PIN - L, with roll pin BEARING - cone, with seal HUB - with bearing cups, items 6 & BEARING - cup, inner BEARING - cup, outer BEARING - cone WASHER - flat, hardened NUT - hex slotted, 3/4 NF PIN - cotter CAP - dust WHEEL - 6 bolt, 14 x 8 KB BOLT - wheel TIRE - tube type, 9.5L-14, 8 ply I1 Rib Implement TUBE - inner SUPPORT - R/H wheel beam, cutterbar end & up BAR - brace, R/H wheel beam, cutterbar end (see Note above) & up RETAINER - brace bar & up ANCHOR - cutterbar, brace bar & up BAR - locking & up PIN - hair SUPPORT - R/H wheel beam, cutterbar end BAR - brace, R/H wheel beam, cutterbar end BEAM - axle, right wheels BEAM - axle, right wheels SHAFT - upper, with support plates (bolt-on) PIN - L, beam retainer RETAINER - support U-CHANNEL - cutterbar support SUPPORT - R/H wheel beam, cutterbar end A NUT - lock, 1/2 NC distorted thread B BOLT - hex head, 1/2 NC x 3 inch C BOLT - hex head, 5/8 NC x 6 inch D WASHER - lock, 5/8 E NUT - lock, 5/8 NC distorted thread F BOLT - round head, square neck, 7/16 NC x 1-3/4 inch G NUT - hex, 7/16 NC H BOLT - round head, square neck, 5/8 NC x 5-1/2 inch J WASHER - flat, 21/32 inch I.D. K NUT - hex, 5/8 NC L BOLT - hex head, 3/4 NC x 6-1/2 inch M NUT - lock, 3/4 NC distorted thread N BOLT - hex head, 5/8 NC x 1-1/2 inch

40 28 30' & 36' Headers GAUGE WHEELS

41 30' & 36' Headers GAUGE WHEELS 29 REF PART DESCRIPTION QTY SERIAL NOTE: For Gauge Wheel / Transport option, see page 26 to 27B SUPPORT - gauge wheel, less spindle SUPPORT - gauge wheel, less spindle SUPPORT - gauge wheel, with welded spindle as shown SUPPORT - gauge wheel, with welded spindle opposite side BUSHING - plastic TUBE - pivot TUBE - pivot SPRING extension [qty. 4 (2 per side) for 36 headers with a... 2 pick up reel in combination with the model 960 combine adapter] SPINDLE - gauge wheel HUB - with bearing cups BEARING - cup, inner BEARING - cup, outer BEARING - cone, with seal BEARING - cone WASHER - flat, 13/16 inch I.D NUT - slotted hex, 3/4 inch NF PIN - cotter, 3/16 x 1-1/4 inch CAP - dust WHEEL - 4 bolt WHEEL - 4 bolt, with valve stem protector... OPT TIRE x 15 I1 rib implement TIRE R15-SL2 radial... OPT STEM- valve BOLT- wheel PIN- lock, with roll pin TUBE - pivot SUPPORT - spring PIN - front PIN - cotter, 1/4 x 2 inch BRACKET - tube support BRACKET - tube support (welded) FITTING - lube A BOLT- round head, square neck, 1/2 NC x 1 inch B NUT- lock, 1/2 NC distorted thread C BOLT- hex head, 3/8 NC x 2-1/2 inch E NUT- smooth flange, 3/8 NC distorted thread H BOLT - hex head, 5/8 NC x 3 inch J NUT - lock, 5/8 NC distorted thread K BOLT - hex head, 1/2 NC x 3 inch BOLT - hex head, 1/2 NC x 1-1/4 inch L NUT - lock, 1/2 NC distorted thread

42 30 SKID SHOES REF PART DESCRIPTION QTY SERIAL.. C 1359 KIT- two skid shoes, complete (Available through WholeGoods only) SHOE- skid, adjustable SUPPORT- front, skid shoe ANGLE - rear support SHOE - skid, adjustable - with rear support angle & hardware... 2 (replaces shoe with welded supports at both ends of welded angle) A BOLT- round head, square neck, 7/16 NC x 1-3/4 inch B BOLT - hex head, 3/8 NC x 1-1/4 inch C NUT - lock, smooth flange, 3/8 NC distorted thread TERRACE SKID SHOE: RICE SPECIAL HEADERS REF PART DESCRIPTION QTY SERIAL.. B 2502 MOUNTING KIT - terrace skid shoe, modifies adapter frame to accept shoe (Available through WholeGoods only.) (Does not include shoe.) (Not required for serial number and up) SHOE - terrace skid... 1 L BOLT - round head, square neck, 5/8 NC x 1-1/2 inch N NUT - lock, 5/8 NC distorted thread ~ f REF Indicates where hardware passes through adapter frame.

43 Models 7000 & 9000 Windrower / 9030 Tractor Center Mount Adapter WINDROWER ADAPTER GROUP 31 REF PART DESCRIPTION QTY SERIAL * B 2300 Windrower Adapter Driveline & Linkage Supports SHAFT - driveline adapter SUPPORT - adapter SHIELD - shaft BEARING - ball, with collar FLANGE - bearing FLANGE - bearing, with lube fitting WASHER - flat, 9030 Center Mount Adapter only SUPPORT - linkage adapter, lower leg HOSE - draper pressure (replaces hose at tractor or adapter L/H leg) HOSE - reel lift, (attach to hydraulic line at header L/H leg) COUPLER - q.d. female, 1/4 NPT - attach to header reel lift hose O-RING - for coupler PLUG - dust... 1 H BOLT - hex head, 3/8 NC x 1 inch J WASHER - lock, 3/8 inch K NUT - lock, smooth flange, 3/8 NC distorted thread L BOLT - round head, square neck, 3/8 NC x 1 inch M NUT - lock, 5/8 NC distorted thread

44 Header to 7000 Tractor ADAPTER

45 960 Header to 7000 Tractor ADAPTER 33 REF PART DESCRIPTION QTY SERIAL ADAPTER - linkage, with decal PAD - rubber PLATE - cover WASHER - flat BUSHING ASSEMBLY - includes item BUSHING - rubber RETAINER - bushing PIN - spring retainer PIN - hair PIN - leg retainer SUPPORT - header PIN - lock, with roll pin SUPPORT - deck shift switch (Triple Delivery only) HARNESS - wiring, deck shift switch (Triple Delivery only) SWITCH - deck shift, mounts to side console in cab (TD only) DECAL - DANGER, header lift cylinder stops... 2 A BOLT - round head, square neck, 1/2 NC x 3 inch B NUT - lock, 1/2 NC distorted thread C BOLT - round head, square neck, 1/2 NC x 2 inch D NUT - hex, 1/2 NC E BOLT - hex head, 5/8 NC x 7 inch F WASHER - lock, 5/8 inch G NUT - hex, 5/8 NC H BOLT - round head, square neck, 1/2 NC x 1-1/2 inch

46 Header to 7000 Tractor AUXILIARY FLOAT SPRING REF PART DESCRIPTION QTY SERIAL ANCHOR BALL WASHER - hardened FLANGE - bearing, with lube fitting FITTING - lube DRAWBOLT - spring INSERT 2-1/4 inch O.D. spring... see note (1) INSERT 3-3/4 inch O.D. spring... see note (1) TUBE - for 2-1/4 inch O.D. spring... see note (1) TUBE - for 3-3/4 inch O.D. spring... see note (1) SPRING 2-1/4 inch O.D.... see note (1) SPRING 3-3/4 inch O.D.... see note (1) A NUT - hex jam, 3/4 NC B BOLT - hex head, 1/2 NC x 1 inch C NUT - lock, 1/2 NC distorted thread D BOLT - hex head, 1/2 NC x 6 inch E BOLT - hex head, 5/16 NC x 3/4 inch F WASHER - lock, 5/16 inch G NUT - hex, 5/16 NC H WASHER - flat, 7/32 inch I.D. NOTES: (1) - 21', 25', & 30' headers take 2-1/4" spring on L/H side and 3-3/4" spring on R/H side. 36' header takes 3-3/4" spring on both sides.

47 960 Header to 7000 Tractor DRIVELINE 35 REF PART DESCRIPTION QTY SERIAL YOKE - clamp, tractor end CROSS & BEARING KIT NSS YOKE & SHAFT (order item 10) SHIELD - outer, with decal BEARING - shield, consists of two halves SHIELD - inner SUPPORT - shield NSS YOKE & TUBE - (order item 11) YOKE - spline bore, 1-3/8 x 21 teeth, with slide collar YOKE - spline bore, 1-3/8 x 21 teeth, clamp type... OPT JOINT ASSEMBLY - male half, includes items 1,2,3,4, JOINT ASSEMBLY - female half, includes items 2,5,6,7,8, DRIVELINE - complete, includes items 10 and A BOLT - hex head, 1/2 NC x 2-3/4 inch B WASHER - lock, 1/2 inch C NUT - hex, 1/2 NC

48 36 Combine Adapter FRAME & FLOAT ASSEMBLY

49 Combine Adapter FRAME & FLOAT ASSEMBLY 37 REF PART DESCRIPTION QTY SERIAL FRAME- adapter, JD FRAME- adapter, JD FRAME- adapter, CASE IH & MF FRAME- adapter, CASE IH & MF FRAME- adapter, GLEANER FRAME- adapter, GLEANER FRAME- adapter, NEW HOLLAND TR & TX FRAME- adapter, NEW HOLLAND TR & TX FRAME- adapter, CLAAS & MF 8450/ FRAME- adapter, CLAAS & MF 8450/ FRAME- adapter, MF FRAME- adapter, MF SPRING- leaf, top SPRING- leaf, second SPRING- leaf, third SPRING- leaf, fourth SPRING- leaf, fifth RETAINER - float lock-out RETAINER- float PIVOT- spring WASHER- flat, hardened ARM- radius PIN- radius arm, lower BUSHING- plastic PIN- clevis, 3/4 x 3-1/4 inch FRAME- float PIN- clevis, 3/4 x 2-3/4 inch ARM- float link ANGLE- front RETAINER - front PAD- rubber RETAINER- spring, front RETAINER- spring, front SPRING- extension, float - hook ends SPRING- extension, float - closed ends INSERT - spring CLEVIS - rear spring mount, with bolt PIN - clevis, 5/8 x 1 inch BAR- link PAN- lower, JD, NH-TX, CL, MF 860/8450/ PAN- lower, JD, NH-TX, CL, MF 860/8450/ PAN- lower, C-IH, GL, NH-TR, MF PAN- lower, C-IH, GL, NH-TR, MF WASHER- special CLEVIS- adjusting, guard angle JD & NH CLEVIS- adjusting, guard angle C-IH, GL, MF, CL LOCK- guard angle, not required for CLAAS, MF 860/8450/ PIN- clevis, 3/4 x 2-1/4 inch PIN- hair WASHER - flat ADJUSTER- chain case height, JD BRACKET- chain case pivot, not required for CL, MF 860/8450/

50 38 Combine Adapter FRAME & FLOAT ASSEMBLY

51 Combine Adapter FRAME & FLOAT ASSEMBLY 39 REF PART DESCRIPTION QTY SERIAL COVER- rubber, feeder draper shaft, JD, GL, NH-TX, MF COVER- rubber, feeder draper shaft, CASE-IH, MF COVER- rubber, feeder draper shaft, NH-TR COVER- rubber, feeder draper shaft, CLAAS, MF 8450/ COVER- rubber, feeder draper shaft, CLAAS, MF 8450/ SPRING ASSEMBLY - includes items and related hardware... 2 A NUT- hex, 3/4 inch NC B BOLT- hex head, 3/4 NC x 1-1/4 inch C NUT- lock, 3/4 inch NC distorted thread D BOLT round head, square neck, 3/8 NC x 1 inch E WASHER - flat, 21/32 inch I.D. F WASHER- lock, 5/8 inch G NUT- hex, 5/8 inch NC H BOLT- round hd. square nk. 1/2 NC x 1-3/4 inch BOLT- round hd. square nk. 1/2 NC x 1 inch (GL - lower bolts only) L BOLT- hex head, 3/4 NC x 8 inch thread full length M WASHER- lock, 1/2 inch N NUT- hex, 1/2 inch NC P BOLT- round hd. square nk. 3/8 NC x 3/4 inch Q NUT- lock, flange head, 3/8 inch NC distorted thread R PIN- cotter, 3/16 x 1-1/4 inch S WASHER- flat, 3/4 inch I.D. T BOLT - hex head, 5/8 NC x 5-1/2 inch V BOLT - flange head, 1/2 NC x 1-1/4 inch W WASHER- flat, 1/2 inch I.D. X BOLT- round hd. square nk. 1/2 NC x 1-1/4 inch - JD BOLT- round hd. square nk. 1/2 NC x 1 inch - C-IH, GL, NH & MF 8570 Y NUT- lock, 1/2 NC distorted thread Z BOLT- hex head, 1/2 NC x 1-1/2 inch - JD BOLT- hex head, 1/2 NC x 1-1/4 inch- C-IH, GL, NH & MF 8570 ~ f REF Indicates where hardware passes through frame member.

52 40 Combine Adapter MOUNTING & SPECIAL PARTS

53 Combine Adapter MOUNTING & SPECIAL PARTS 41 REF PART DESCRIPTION QTY SERIAL PANEL- delivery opening extension, left, JD & MF PANEL- delivery opening extension, left, JD & MF PANEL- delivery opening extension, left, NH PANEL- delivery opening extension, right, JD & MF PANEL- delivery opening extension, right, JD & MF PANEL- delivery opening extension, right, NH DEFLECTOR- extension, JD 7720/9500 & MF DEFLECTOR- extension, JD 7720/9500 & MF DEFLECTOR- extension, JD 7720/9500 & MF DEFLECTOR- extension, NH-TR WASHER- square, NH PANEL- delivery opening extension, left, C-IH, GL, & MF PANEL- delivery opening extension, left, CLAAS, MF 8450/ PANEL- delivery opening extension, right, C-IH, GL, & MF PANEL- delivery opening extension, right, CLAAS, MF 8450/ DEFLECTOR- extension, C-IH 1460/1660, GL, MF 8450/8570, & CL 96/ DEFLECTOR- extension, C-IH 1460/1660, GL, MF 8450/8570, & CL 96/ ANGLE- left mounting, JD ANGLE- right mounting, JD BAR- mounting, JD WASHER- flat, JD, CLAAS & MF 8450/ PIN- clamp, CASE-IH & MF PIN- straight, CASE-IH COVER- eyebolt access, CASE-IH & NH COVER- eyebolt access, CASE-IH & NH FLAP- rubber, R/H - GLEANER PIN- straight, NH EYEBOLT- NH COVER- driveline, NH-TR COVER- driveline, NH-TX BEAM- adapter, MF DEFLECTOR- MF PIN-L, threaded, MF SUPPORT- mounting, CLAAS & MF 8450/ BAR- spacer, CLAAS & MF 8450/ PIN-L, CLAAS & MF 8450/ PIN- hair DEFLECTOR- CLAAS & MF 8450/ ANGLE- chain case mount, CLAAS & MF 8450/ HARNESS - electrical connector, header lights, JD ONLY HARNESS - electrical connector, header lights, GL ONLY HARNESS - electrical connector, header lights, C-IH ONLY HARNESS - electrical connector, header lights, all makes except JD, C-IH & GL SUPPORT - drive case/hydraulic tank, MF SUPPORT - tank, MF SUPPORT - feeder house mounting, MF STOP - lower, MF SHIELD - rubber, R/H, MF B 2544 MOUNTING KIT - JD Reel Speed Sensor (Kit available through WholeGoods only)opt (sensor and wiring harness must be obtained from John Deere) A NUT - hex jam, 3/4 NC (input driveline storage - Case) B BOLT - hex head, 3/4 NC x 3 inch (input driveline storage - Case) C NUT - hex jam, 5/8 NC D BOLT- hex head, 5/8 NC x 4-1/2 inch thread full length E BOLT- rd. hd. sq. nk, 3/8 NC x 1 inch F WASHER- lock, 5/8 inch G NUT- hex, 5/8 inch NC H BOLT- rd. hd. sq. nk. 5/8 NC x 2 inch J BOLT - rd. hd. sq. nk. 1/2 NC x 1 inch K BOLT - rd hd sq nk 1/2 NC x 1-1/2" L 4761 WASHER - 17/32 I.D. x 3/16" thick M WASHER - lock, 1/2 inch N NUT - hex, 1/2 NC P BOLT- rnd.hd. Sq.nk. 3/8 NC x 3/4 Q NUT- lock, smth flng 3/8 NC D.T. T BOLT- rnd hd. sq nk, 5/8 NC x 1-1/2" U WASHER- flat, 21/32 inch ID V BOLT- hex head, 3/8 NC x 3/4 inch W WASHER- flat, 1/2 inch I.D. Y NUT- lock, 1/2 NC distorted thread Z BOLT- hex head, 1/2 NC x 1-1/4 inch

54 42 Combine Adapter DRAPER DRIVE HYDRAULICS *For Claas & MF 860/8450/8460 adapters, these components not exactly as shown. See description, next page.

55 Combine Adapter DRAPER DRIVE HYDRAULICS 43 REF PART DESCRIPTION QTY SERIAL TANK - oil reservoir, includes items 2, 3 and BREATHER - 1/8 NPT PLUG - pipe, 3/8 NPT GAUGE - oil filler cap HOSE - tank to pump CLAMP - hose FITTING - adapter, beaded, 1 inch hose I.D. x 1-1/16 O-ring PUMP - hydraulic, with key SEAL KIT - for pump HOSE - pump to valve HOSE - pump to valve FITTING - 90 male elbow, 5/8 tube x 7/8 O-ring FITTING - straight adapter, 5/8 tube x 7/8 O-ring, (both ends... 2 of hose from pump to valve) VALVE - flow control SEAL KIT - for valve FITTING - 90 male elbow, 7/8 O-ring x 1/2 NPT - JD, NH, CL & MF 860/8450/ FITTING - 45 male elbow, 7/8 O-ring x 5/8 tube - C-IH, GL & MF COUPLER - male, 1/2 NPT CAP - dust COUPLER - female, 1/2 NPT O-RING - for coupler PLUG - dust FITTING - 90 elbow, 1/2 NPT male x 5/8 tube female (not required for JD & NH) FITTING - male tee, 5/8 tube x 5/8 tube x 7/8 O-ring FITTING - adapter, 5/8 tube female x 1/2 NPT male FITTING - reducer bushing, 1/2 NPT female x 3/4 NPT male FILTER - oil, with head FILTER - replacement element only (Alternate: 45205) FITTING - adapter, beaded, 3/4 inch hose I.D. x 3/4 NPT FITTING - 90 elbow, beaded, 3/4 inch hose I.D. x 3/4 NPT HOSE - filter to tank FASTENER - plastic tie HOSE - valve to filter, MF FITTING - 90 elbow, 3/4 NPT x 5/8 tube, MF A BOLT - round head, square neck 1/2 NC x 1 inch B NUT - lock, 1/2 NC distorted thread C BOLT - round head, square neck 1/4 NC x 2-1/4 inch D NUT - serrated flange, 1/4 NC E BOLT - flange head, 5/16 NC x 5/8 inch ~ f REF Indicates where hardware passes through frame member. NOTES: - For all combine adapters except Claas, MF 860/8450/ For Claas, MF 860/8450/8460 combine adapters

56 44 Combine Adapter REEL LIFT & REEL DRIVE FITTINGS The fittings shown below adapt reel drive and lift for a particular combine. Code Key: RR - Attach to reel drive return coupler on header (yellow colour code). RP - Attach to reel drive pressure coupler on header. RL - Attach to reel lift line on header.

57 Combine Adapter REEL LIFT & REEL DRIVE FITTINGS 45 REF PART DESCRIPTION QTY SERIAL Case-IH, Gleaner & New Holland * COUPLER - female, 1/2 NPT COUPLER - male, 1/2 NPT HOSE - header to steel lines on adapter LINE - hydraulic W34896 CLAMP - hydraulic line WASHER - square RETAINER - hydraulic line PAD rubber, (qty. 6 for New Holland TR) Case IH COUPLER - male, 1/2 NPT HOSE - extension to reel return hose on header HOSE - extension to reel return line on adapter HOSE - extension to reel lift hose on header HOSE - extension to reel lift line on header CAP - dust, for coupler * COUPLER - female, 1/2 NPT FITTING - 45 male elbow, 1/2 NPT x 5/8 tube Gleaner FITTING - tee, 5/8 tube male x 5/8 tube male x 1/2 NPT female VALVE - check FITTING - tee, 5/8 tube male x 1/2 NPT male x 1/2 NPT male HOSE - reel pressure line on adapter to tee COUPLER - female, 1/2 NPT HOSE - extension to reel return hose on header HOSE - extension to reel return line on adapter HOSE - extension to reel return line on adapter COUPLER - male, 1/2 NPT CAP - dust COUPLER - male, 1/4 NPT FITTING - 45 male elbow, 1/2 NPT x 5/8 tube HOSE - extension to reel lift line on header SUPPORT - reel lift coupler WASHER - dished New Holland TR FITTING - 45 male elbow, 1/2 NPT x 5/8 tube * COUPLER - female, 1/2 NPT COUPLER - male, 1/2 NPT HOSE - extension to reel drive pressure hose on header HOSE - extension to reel drive pressure line on adapter COUPLER - male, 1/4 NPT HOSE - extension to reel lift hose on header HOSE - extension to reel lift line on header CAP - dust... 1 New Holland TX SUPPORT - reel lift coupler HOSE - extension to reel lift line on header FITTING - 45 male elbow, 1/2 NPT x 5/8 tube * COUPLER - female, 1/2 NPT COUPLER - male, 1/2 NPT HOSE - extension to reel drive pressure hose on header HOSE - extension to reel drive pressure line on adapter REF FITTING - adapter, supplied with TX Combine SLEEVE - flareless, 3/8 tube NUT - flareless, 3/8 tube NUT - 37 flare, 3/8 tube SLEEVE - 37 flare, 3/8 tube LINE - hydraulic FITTING - adapter, 3/8 tube male x 1/4 NPT female * O-RING - for coupler A NUT - lock, smooth flange, 3/8 NC distorted thread E BOLT - round head, square neck, 3/8 NC x 3/4 inch

58 45 A Combine Adapter REEL LIFT & REEL DRIVE FITTINGS The fittings shown below adapt reel drive and lift for a particular combine. Code Key: RR - Attach to reel drive return coupler on header (yellow colour code). RP - Attach to reel drive pressure coupler on header. RL - Attach to reel lift line on header.

59 Combine Adapter REEL LIFT & REEL DRIVE FITTINGS 45 B REF PART DESCRIPTION QTY SERIAL MF COUPLER - male, 1/2 NPT HOSE - extension to reel lift line on header CAP - dust... 1 John Deere * COUPLER - female, 1/2 NPT FITTING - reducer bushing, 1/2 NPT male x 1/4 NPT female PLUG - dust COUPLER - male, 1/2 NPT COUPLER - female WASHER - dished SUPPORT - coupler mount HOSE - extension to reel lift line on header HOSE - extensions to reel drive pressure and return hoses on header (47009 hoses required with 36' header on 9600 combine only) HOLDER - hose Massey FITTING - 45 male elbow, 1/2 NPT x 5/8 tube LINE - hydraulic HOSE - extensions to reel drive pressure and return * COUPLER - female, 1/2 NPT COUPLER - male, 1/2 NPT HOSE - extension to reel lift hose on header HOSE - extension to reel lift line on header CAP - dust FITTING - adapter HOSE - extension to combine Claas & MF 8450/ COUPLER - male, 1/2 NPT FITTING - connector, 1/2 NPT male x 1/4 NPT female CAP - dust * COUPLER - female, 1/2 NPT HOSE - extension to reel drive pressure HOSE - extension to reel drive return HOSE - extension to reel lift line on header * O-RING - for coupler A NUT - lock, smooth flange, 3/8 NC distorted thread C BOLT - hex head, 3/8 NC x 1-1/2 inch E BOLT - round head, square neck, 3/8 NC x 3/4 inch

60 46 Combine Adapter DRIVE CASE

61 Combine Adapter DRIVE CASE 47 REF PART DESCRIPTION QTY SERIAL NOTE: For Claas and MF 860/8450/8460, see page 48, HOUSING - drive, includes item 26: JD, C-IH, GL, NH, MF ANGLE - upper mounting PLATE - upper mounting SHAFT - upper, to header driveline KEY - woodruff, SAE # SHAFT - middle, to feeder draper SPROCKET - double: JD, C-IH, & MF SPROCKET - double: GL & NH BUSHING - split taper, with bolts and outer key KEY - 1/4 x 1/4 x 2 inch SHAFT - lower, input (takes one key #5 and one key #9) SHAFT - lower, input (takes two keys #9) SPROCKET - double, drive CHAIN - roller, double: JD, C-IH, & MF CHAIN - roller, double: GL & NH LINK - connector, double BEARING - ball, with lock collar FLANGE - bearing FLANGE - bearing, with lube fitting REF PUMP - see Combine Adapter Hydraulics PLATE - pump mounting COLLAR - shaft COVER - drive: JD, C-IH, NH, GL & MF CAP - plastic FASTENER - 1/4 turn SHIELD - drives (welds to hinge on item 1) SHIELD - rubber, CASE IH & MF SHIELD - rubber, JD, GL & NH-TX SHIELD - rubber, NH-TR KEY - 3/16 sq. x 0.97 inch (included with pump) BEARING - ball, with lock collar BUSHING - split taper, with bolts and outer key KEY - 5/16 square x 2 inch FLANGE - bearing FLANGE - bearing, with lube fitting FLANGE - bearing, cropped, with lube fitting FLANGE - bearing, cropped... 2 A NUT- lock, flange 3/8 inch NC distorted thread C BOLT- round hd. square nk. 3/8 NC x 1-1/4 inch D BOLT- round hd. square nk. 3/8 NC x 3/4 inch E SCREW- set, sq. hd. cup pt. 3/8 NC x 1 inch F NUT- hex jam, 3/8 NC G SCREW- set, sq. hd. cup pt. 3/8 NC x 3/4 inch H WASHER - flat, 11/32 I.D. J BOLT- round hd. square nk. 3/8 NC x 1-3/4 inch, thread full length K BOLT- hex head, 3/8 NC x 1-1/4 inch ~ f REF Indicates where hardware passes though housing.

62 48 Combine Adapter DRIVE CASE: CLAAS & MF 860/8450/8460

63 Combine Adapter DRIVE CASE: CLAAS & MF 860/8450/ REF PART DESCRIPTION QTY SERIAL HOUSING - drive, includes item SHAFT - to header driveline SPROCKET - 14 tooth BUSHING - split taper, with bolts and outer key KEY - 5/16 square x 2 inch BEARING - ball, with lock collar FLANGE - bearing FLANGE - bearing, with lube fitting SHAFT - to feeder draper BUSHING - split taper, with bolts and outer key KEY - 1/4 square x 2 inch BEARING - ball, with lock collar FLANGE - bearing FLANGE - bearing, with lube fitting SHAFT - input (takes one key #11 and one key #38) SHAFT - input (takes two keys #11) SPROCKET - 20 tooth: Claas & MF 8450/ SPROCKET - 28 tooth: MF SPROCKET - idler, includes bearing and retaining ring BEARING - ball, for sprocket assembly RING - retaining, for sprocket assembly CHAIN - roller, with connector link: Claas & MF 8450/ CHAIN - roller, with connector link: MF LINK - connector, for chain 2030 or CLEVIS - chain tension adjuster SPACER - tube, 17 mm SPACER - tube, 24 mm SPACER - tube, 52 mm SPACER - tube, 45 mm SHIELD - drives (welds to hinge on item 1) FASTENER - 1/4 turn WASHER - flat, 11/32 inch I.D COVER - drive CAP - plastic REF DRIVELINE - input, see Combine Adapter Input Drivelines KEY - woodruff, SAE # COLLAR - shaft REF PUMP - see Combine Adapter Hydraulics PLATE - pump mounting KEY - 3/16 square x 0.97 inch... 1 A BOLT - hex head, 3/8 NC x 1-1/4 inch B BOLT - round head, square neck, 3/8 NC x 3/4 inch C NUT - lock, smooth flange, 3/8 NC distorted thread D BOLT - hex head, 5/8 NC x 5 inch E WASHER - flat, 21/32 inch I.D. F NUT - lock, 5/8 NC distorted thread G BOLT - round head, square neck, 3/8 NC x 1-3/4 inch H SCREW - set, square head, cup point, 3/8 NC x 3/4 inch J NUT - hex jam, 3/8 NC K SCREW - set, square head, cup point, 3/8 NC x 1 inch

64 50 Combine Adapter FEEDER DRAPER DRIVELINES The following four pages (50, 51, 51A, 51B) describe all feeder draper drivelines used on the 960 Harvest Header Combine Adapter. Be sure driveline is properly identified before ordering or supplying repair parts. Manufacturer: WEASLER 6 SERIES Used on Adapter Serial Numbers: Service parts only. Identifying Features: Cross & bearing snap rings are on inside of yoke. Tube & shaft have a rectangular cross section. REF PART DESCRIPTION QTY SERIAL DRIVELINE - feeder draper, complete JOINT ASSEMBLY - inner half YOKE - feeder draper end CROSS & BEARING KIT NSS YOKE with SHAFT (order 40376) JOINT ASSEMBLY - outer half SHIELD - plastic REPAIR KIT - nylon NSS YOKE with TUBE (order 36749) YOKE - drive case end... 1 D SCREW - set, square head, cup point, 3/8 NC x 1 inch E NUT - hex jam, 3/8 NC F SCREW - set, square head, cup point, 3/8 NC x 3/4 inch

65 Manufacturer: WALTERSCHEID 2100 SERIES 51 Used on Adapter Serial Numbers: Identifying Features: Cross & bearing snap rings are on outside of yoke. Inner & outer tubes have an oval cross section. NOTE: Items 3, 4, & 5 at feeder draper end may have Walterscheid 2200 Series components. Be sure yoke and cross kit are properly identified as follows: Item 3: YOKE Series Yoke width (A) = 2-½" (63 mm) 2200 Series Yoke width (A) = 2-¾" (70 mm) Item 4: CROSS KIT Series Cross is stamped "100" 2200 Series Cross is stamped "2200" Parts Substitution: Depending on parts availability, orders for item 3 (40649), item 4 at feed draper end only (40721 or 40398) may be substituted with 2200 YOKE ASS'Y. (49182). This assembly consists of end yoke (with bolted deflector), cross kit, inboard yoke, and roll pin. This assembly must be connected to inner oval tube. Depending on parts availability, orders for item 1 (40646), item 2 (40648), item 3 (40649), item 4 (40721 or 40398), item 8 (40657) or item 10 (40655) may be substituted with a complete 2200 Series Driveline with Deflector (40889). Repair parts for this driveline are found on page 51B. (Part No consists of Driveline plus Deflector ) REF PART DESCRIPTION QTY SERIAL 1 * DRIVELINE - feeder draper, includes items * JOINT ASSEMBLY - inner half * YOKE Series, feeder draper end YOKE Series, feeder draper end * CROSS & BEARING KIT Series CROSS & BEARING KIT Series... 1 * KIT - bearing cap (converts zerk location from cap to cross) NSS YOKE - inboard (order 40648) NSS TUBE - inner (order 40648) * JOINT ASSEMBLY - outer half NSS YOKE with TUBE (order 40657) * YOKE with CLUTCH REPAIR KIT - clutch (includes cams, springs, and seal ring) DEFLECTOR - bolt on (for yoke or yoke ass'y )... 1 D SCREW - set, square head, cup point, 3/8 NC x 1 inch E NUT - hex jam, 3/8 NC F SCREW - set, square head, cup point, 3/8 NC x 3/4 inch * - See Parts Substitution Note above for items marked *.