AWS PARTS BOOK Combine Mount Models

Transcription

1 AWS PARTS BOOK Combine Mount Models Version

2 TABLE OF CONTENTS PARTS ORDER INFORMATION... 3 COMBINE MOUNT FAN COMPONENTS... 4 ALL MODELS: BLOWER ASSEMBLY... 5 ROTARY SCREEN ASSEMBLY... 6 THROTTLE CONTROLS... 7 FEEDER TUBE ASSEMBLY... 9 REAR TUBE ASSEMBLY ROUTE-TO-RIGHT ASSEMBLY...11 MANIFOLD COMPONENTS CABLE KIT ASSEMBLY JOHN DEERE: CASE/NH: STS CHASSIS ASSEMBLY STS DRIVE COMPONENTS /60 WALKER CHASSIS ASSEMBLY /10 SERIES CHASSIS ASSEMBLY /60 WALKER AND 9000/10 DRIVE COMPONENTS JOHN DEERE 600 MOUNT ARMS JOHN DEERE 640FD MOUNT ARMS JOHN DEERE 900 MOUNT ARMS JOHN DEERE FAN SHAFT ASSEMBLIES...24 CASE CHASSIS ASSEMBLY...25 CASE 66 DRIVE COMPONENTS CASE 88 DRIVE COMPONENTS CASE 1020 MOUNT ARMS...29 CASE 2020 MOUNT ARMS...30 CASE 3020 MOUNT ARMS...31 NEW HOLLAND CHASSIS ASSEMBLY NEW HOLLAND DRIVE COMPONENTS NEW HOLLAND 74C AND 973 MOUNT ARMS...34 NEW HOLLAND 740CF MOUNT ARMS

3 PARTS ORDER INFORMATION Contact Info: TEMP Farm Equipment Ltd Wellington St. Box 269 Mitchell, Ontario, Canada N0K-1N0 Phone: or Fax: Parts Orders: Craig Rock Sales: Jeff Dolmage Sales: Greg Aitken Technical Info: Mike DeCorte Administration: Ryan Yoanidis Installation: Dave Miller Terms and Conditions: 1. All goods returned must be unused and are subject to a 10% handling fee. They must be shipped back to AWS prepaid. 2. All goods are F.O.B Mitchell, Ontario, Canada. 3. Please indicate preferred shipment method with order Typical: US: Via UPS ground collect Western Canada: Via DHL ground collect Ontario: Cardinal Couriers Collect *Western US Orders: Shipped from Aemsco warehouse in Minot, North Dakota via Speedy Couriers. Freight is prepaid and invoiced. 3

4 COMBINE MOUNT FAN COMPONENTS John Deere Combine Mounts See pages for parts index. STS Blower Assembly: John Deere S series combines John Deere 95/96/97/98 STS series combines Chassis Assembly P.15 Drive; Small Rotor P.16 Drive; Large Rotor P.17 JD STS COMBINE MOUNT ASSEMBLY 50/60 Walker Series Blower Assembly: John Deere 9550/9650 WTS series combines Chassis Assembly P.18 Drive Assembly P /10 Series Blower Assembly: John Deere 9000/10 series combines Chassis Assembly P.19 Drive Assembly P.20 CASE/NH Combine Mounts See Pages for parts index. CASE/NH Blower Assembly include: Case 1660 Chassis Assembly Case Drive Assembly P P CASE COMBINE MOUNT ASSEMBLY NH Fixed Speed Assembly Chassis Assembly P. 32 Drive Assembly P.33 NH Variable Speed Assembly (INSIDE MOUNT) : NH Chassis Assembly P. 32 Drive Assembly P. 33 NH Variable Speed Assembly (OUTSIDE MOUNT) : NH Chassis Assembly P.32 Drive Assembly P.33 NH FIXED SPEED COMBINE MOUNT 4

5 BLOWER ASSEMBLY Right Hand Combine mount Shown * Mount Impellor to fan shaft using 7/8" Browning Bushing that comes with impellor. * Do not use bolts that come with impellor, instead replace with ¼ X 1 bolt (not shown). -SEE PAGE #7 FOR DETAILS ABOUT DIFFERENT THROTTLE CONTROL SETUPS. THROTTLE CONTROL 1) AWS0069 FAN HOUSING, RH 1 2) AWS0068 FAN HOUSING, LH 1 3) AWS0071 IMPELLER, RIGHT HAND 1 H7/8 HUB (INCLUDED WITH IMPELLOR) 1 4) AWS0157 LIFT HOOK 1 5) NYLOCK NUT, 5/ ) BOLT, 5/16 x 1-1/4 7 7) BOLT, 5/16 x 1-1/2 (BOLTS FOR HOOK AND FENDER) 5 8) AWS0067 FAN PLATE 1 9) BOLT, 1/2 x 3/4 4 10) AWS0065 SERIAL NUMBER PLATE 1 11) 3/8 SELF TAPPING BOLT (4/manual actuator, 2/electric actuator) 4 12) AWS0143 FENDER (COMBINE MOUNTS ONLY) 1 13) AWS0230 ROTARY SCREEN ASSEMBLY (P. 6) 1 14) ¼ NC x 1 HEX BOLT 2 Fan decals are dependent on make and model. Part numbers are as follows: ITEM# PART # DESCRIPTION QTY 15) AWS0162 AWS Decal 1 AWS0339 Model Decal (2010) 1 AWS0165 C Style Decal 1 AWS0267 S Style Decal 1 AWS0268 R Style Decal 1 AWS0394 N Style Decal 1 5

6 ROTARY SCREEN ASSEMBLY For all models AWS0230 ROTARY SCREEN ASSEMBLY 1) AWS0076 ROTARY SCREEN SUPPORT 1 2) AWS0384 SPACER, ROTARY SCREEN 1 3) AWS0078 BEARING, ROTARY SCREEN AS ) AWS0079 BEARING FLANGE, PF ) AWS0077 ROTARY SCREEN 1 6) AWS0080 ROTARY SCREEN CAP 1 7) ¼ NC X ¾ CARRIAGE BOLT 6 8) ¼ NC NYLOCK NUT 6 9) 3/8 NC X 1 FLANGE HEX SELF TAP BOLT 4 10) AWS0081 ROTARY SCREEN CLEANOUT 1 6

7 THROTTLE CONTROLS There are four different throttle control arrangements used to regulate the air flow. These can be either manually controlled or actuator controlled; each with left and right arrangements. Combine mount systems routed to the left feature this control valve inside the feeder house tube, while all other arrangements are fan mounted. See next page for left-routed combine mount controls ACTUATOR CONTROLLED; RIGHT HAND SHOWN 1) AWS0114 THROTTLE PLATE 1 2) AWS0212 THROTTLE SHAFT, RIGHT; ELECTRIC 1 3) AWS0095 HEADER MOUNT ACTUATOR 1 4) AWS0213 ACTUATOR MOUNT; HEADER MT. 1 5) 3/8 NC X 1 ½ HEX BOLT 1 6) #10-32 SS NYLOCK NUT 2 7) 3/8 NC HEX FLANGE NUT 2 8) M10 X 30 STUD 1 9) 3/8 SPRING WASHERS 4 10) 3/8 FLAT WASHER 4 11) M FLANGE NYLON LOCKNUT 1 12) 3/8 NC X 1 ¾ HEX BOLT 2 13) 3/8 NC X 2 HEX BOLT 1 14) X ¾ SOCKET HD. CAP SCRW. 2 15) 3/8 NC STOVER LOCKNUT 1 2. MANUALLY CONTROLLED; RIGHT HAND SHOWN 2. 1) AWS0114 THROTTLE PLATE 1 2) AWS0074 THROTTLE CONTROL; RH MANUAL 1 3) M10 X 30 STUD 1 4) 3/8 FLAT WASHER 2 5) M FLANGE NYLON LOCKNUT 1 6) 3/8 SPRING WASHERS 4 7) #10-32 SS NYLOCK NUT 2 8) X ¾ SOCKET HD. CAP SCRW. 2 * ARRANGE SPRING WASHERS SO THAT BEVEL ALTERNATES. 7

8 THROTTLE CONTROLS CONT D COMBINE MOUNT ROUTED TO LEFT; MANUAL 1) AWS0074 THROTTLE; LEFT 1 2) AWS0114 THROTTLE PLATE 1 3) AWS0512 SHOULDER BUSHING 2 4) 3/8 FLAT WASHER 2 5) NYLOCK NUT # ) X ¾ SOCKET HEADSCREW 2 7) 3/8 NC NYLOCK NUT 2 8) 3/8 NC X 1 ¼ BOLT 1 9) ½ FLAT WASHER 1 10) 3/8 SPRING WASHER 4 ALTERNATE BEVELS IN SPRING WASHERS. SMOOTH SIDE OF FLAT WASHERS TO THROTTLE. COMBINE MOUNT ROUTED TO LEFT; ACTUATOR 1) AWS0095 ACTUATOR 1 2) AWS0276 THROTTLE GAUGE 1 3) AWS0214 ACTUATOR THROTTLE; LH 1 4) AWS0114 THROTTLE PLATE 1 5) AWS0283 ACTUATOR SADDLE 1 6) AWS0512 BUSHING SHOULDER 2 7) AWS0075 THROTTLE DECALS 1 8) AWS U-BOLT 1 9) 3/8 NC NYLON LOCKNUT 3 10) 3/8 X 1 ¼ BOLT 1 11) NYLOCK NUT # ) X ¾ SOCKET HEADSCREW 2 13) ½ FLAT WASHER 1 14) ¼ NYLOCK NUT 2 15) 3/8 NC X 1 ½ BOLT 1 16) 3/8 FLAT WASHER 3 17) 3/8 SPRING WASHERS 4 18) 3/8 NC X 2 BOLT 1 19) 3/8 NC JAM NUT 1 REAR TUBE QUICK CONNECT END 8

9 FEEDER TUBE ASSEMBLY 7) 1) AWS0084 FLEX HOSE (48-60 AT COMBINE) 1 2) AWS0085 HOSE CLAMP ) AWS0160 CONNECTOR 1 4) AWS0091 RUBBER ELBOW (90*) 1 AWS0441 RUBBER ELBOW (45*) 5) AWS0086 HOSE CLAMP ) AWS0149 FEEDER HOUSE TUBE 1 7) AWS0153 SADDLE, FEEDER TUBE JD & NH 2 (AWS0284 SADDLE, CASE) 8) AWS U-BOLT 2 9) ½ NC SER. HEX FLANGE NUT 4 10) ¼ NYLOCK NUT 4 11) AWS0151 Q.R. CLAMP 1 12) AWS0396 FEEDER TUBE BRACKET 2 13) AWS0340 X-TREME AIR DECAL 1 14) AWS0323 BAFFLE NOTICE DECAL 1 9

10 REAR TUBE ASSEMBLY 1) AWS0152 COUPLER 1 2) AWS0085 HOSE CLAMP ) AWS0084 FLEX HOSE 1 4) AWS0174 REAR MANIFOLD 1 5) AWS0154 SADDLE; REAR TUBE 2 6) AWS U-BOLT 2 7) ¼ NC HEX NUT 4 8) 3/8 NC FLANGED HEX SELF TAP 4 9) AWS RUBBER ELBOW; (90*) 1 AWS0441 RUBBER ELBOW (45*) 10) AWS0086 HOSE CLAMP ) AWS0160 CONNECTOR 1 REAR TUBE MOUNTING COMPONENTS VARY WITH DIFFERENT STYLE HEADS: MacDon Mounting Components: 1) AWS0153 SADDLE W/ STUD 2 2) AWS0644 SADDLE; REAR ROUND 2 3) AWS0163 U-BOLT; 8 S.S. 2 4) ¼ NC NYLOCK NUT 4 5) 3/8 NC X 1 HEX FLANGE SELF TAP 4 6) ½ NC HEX JAM NUT 2 John Deere Flex Draper Mounting Components: 1) AWS0153 SADDLE W/ STUD 2 2) AWS0163 U-BOLT; 8 S.S. 2 3) ¼ NC NYLOCK NUT 4 4) ½ NC FLANGED NUT 4 10

11 ROUTE-TO-RIGHT ASSEMBLY 1) AWS0084 FLEX HOSE 1 2) AWS0152 COUPLER 2 3) AWS0085 HOSE CLAMP ) AWS0091 RUBBER ELBOW 8 ; (90*) 1 AWS0441 RUBBER ELBOW; (45*) 5) AWS0151 Q.R. CLAMP 1 6) AWS0174 REAR MANIFOLD 1 7) AWS0086 HOSE CLAMP ) AWS0441 ELBOW 8 ; 45 DEGREE 1 9) AWS0160 CONNECTOR 1 10) AWS0154 SADDLE, REAR TUBE 2 11) AWS U-BOLT 2 12) ¼ NC NYLOCK NUT 4 13) 3/8 NC X 1 FLANGE HEX SELF TAP 4 11

12 MANIFOLD COMPONENTS SINGLE REEL Inlet End 1) AWS0410 FLEXHOSE, 8 x ) AWS0115 TIE CHAIN ASSEMBLY (OPTIONAL) 1 3) AWS0085 HOSECLAMP, ) AWS0064 TRANSITION TUBE DECAL 1 5) AWS0087 TRANSITION TUBE 1 6) AWS0163 U-BOLT 8 SS c/w LOCKNUTS +1 7) NYLOCK NUT, 1/4 2 for U-BOLT +2 8) AWS0153 SADDLE w STUD 1 9) AWS0090 TRANSITION TUBE SUPPORT 1 10) FLAT WASHER, 1/2 PLATED 1 11) STOVER LOCK NUT, 1/2 1 12) AWS0086 HOSECLAMP, ) AWS0091 ELBOW, ) AWS0092 LOCKSLEEVE 1 15) LOCKNUT, 3/8 1 16) AWS0093 BUSHING, LOCKSLEEVE 1 17) BOLT, 3/8 NC X ) AWS0163 NOZZLE +1 19) AWS0116 NOZZLE GASKET +1 20) AWS0202 MANIFOLD BALANCER 1 21) MANIFOLD (VARIOUS LENGTHS) 1 22) AWS0102 MANIFOLD ARM 1 23) 3/8 NC X 5 ½ HEX BOLT 2 24) 3/8 FLAT WASHER 2 25) AWS0123 SADDLE; CLAMP 1 *ITEMS WITH A QUANTITY OF +1 ARE DEPENDENT ON HEADER SIZE. *MANIFOLD BALANCER IS RIVETED INSIDE THE MANIFOLD 1/3 OF THE WAY DOWN THE FROM THE FAN SIDE. 12

13 MANIFOLD COMPONENTS SINGLE REEL End-Cap End 1) AWS0102 MANIFOLD ARM 1 2) AWS0094 END CAP ASSEMBLY 1 3) AWS0123 SADDLE, CLAMP 1 4) AWS0479 SPACER; END CAP 4 2 5) AWS0103 ACTUATOR PIVOT 1 6) AWS0191 ACTUATOR; MANIFOLD TILT 1 7) 3/8 NC X 1 ½ HEX BOLT 2 8) 3/8 NC STOVER LOCKNUT 2 9) 3/8 NC X ¾ HEX BOLT 2 10) ¼ NC X ¾ FLANGED HEAD BOLT 4 11) #8-18 X3/4 SELF DRILLING SCREW 2 12) 3/8 FLAT WASHER 4 13) 3/8 NC X 5 HEX BOLT 2 13

14 CABLE KIT ASSEMBLY (IF APPLICABLE) 1) AWS0435 SADDLE, CABLE SUPPORT 3 2) AWS U-BOLT 3 3) AWS0433 CABLE TENSIONER 1 4) 1/8 STEEL CABLE 1 5) ¼ NC NYLOCK NUT 6 6) 3/8 NC X 3 HEX BOLT 1 7) 7/16 NC X 5 HEX BOLT 1 8) 7/16 NC JAM NUT 1 9) CABLE CLAMP 1 14

15 JOHN DEERE STS COMBINE MOUNT CHASSIS ASSEMBLY 1) AWS0366 STS CHASSIS ASSEMBLY 1 2) AWS0261 IDLER ARM, TORSION TYPE 1 3) AWS0260 BUSHING, IDLER ARM 5-5/8 1 4) BOLT, 1/2 NC X 6-1/2 1 5) FLANGED HEX NUT, 1/2 5 6) AWS0129 FAN SHAFT ASSEMBLY, 25 1 (See breakout on p. 24) 7) AWS0019 BUSHING, TENSIONER 1 8) FLAT WASHER, 3/8 6 9) BOLT, 3/8 NC X 7/8 1 10) AWS0259 SPRING, TORSIONAL 1 11) AWS0312 CHASSIS CENTER, 50 SERIES 1 12) AWS0039 U-BOLT, 3 PLATED 3 13) FLANGED HEX NUT, 3/8 6 14) AWS0033 BUSHING, SDS 1-1/8 1 15) AWS0030 SHEAVE, 3VX ) AWS0112 SPACER, 1/2 X 2-3/8 1 17) FLAT WASHER, 1/2 4+/- 18) AWS0111 IDLER, A DRIVE, COMBINE 1 19) BOLT, 1/2 NC X 4-1/2 3 20) BOLT, 3/8 NC X ) AWS0333 SHEILD, 50 SERIES COMBINE 1 22) AWS0233 CM GOLD DECK WASHER 6 23) AWS0234 FLAT SIDE WASHER 2 24) AWS0227 SPACER, 1/2 X ) BOLT, 1/2 NC X 1-1/2 2 15

16 STS SERIES DRIVE COMPONENTS SMALL ( ): 1) AWS0419 AXLE, JD ) AWS0405 STS SPACER 1 3) AWS0408 SHEAVE; STS ALUMINUM 1 4) AWS0003 BEARING, 1 3/8 1 5) AWS0001 BEARING FLANGE; PF ) AWS0420 BEARING FLANGE; GREASABLE 1 7) AWS0418 STS9560 TORQUE ARM 1 8) AWS0417 STS9560 FRONT BRACE 1 9) AWS0428 M12 X 280 BOLT 2 ITEM# PART# DESCRIPTION QTY. 10) AWS HARNESS PROTECTOR 1 11) AWS0367 BELT, 3VX ) ¼ NC X 1 ¼ BOLT 4 13) ¼ NC NYLOCK NUT 4 14) 3/8 NC X ¾ CARRIAGE BOLT 5 15) 3/8 NC FLANGE NUT 5 16) 3/8 NC X 1 FLANGE HEX SELF TAP 3 17) 5/16 NC X 1 ¼ HEX BOLT 2 18) 5/16 NC NYLOCK NUT 2 SMALL S SERIES (S550): EXCHANGED ITEMS: 19) AWS0595 STS 550 TORQUE ARM BRKT. 1 ADDITIONAL ITEMS: 20) AWS0594 STS ADAPTER, S SERIES 1 21) ¼ NC X 1 ½ HEX BOLT 4 22) ¼ NC NYLOCK NUT 4 16

17 STS SERIES DRIVE COMPONENTS CONT D LARGE (9650,9750,9660,9760,9670,9770,9870): LARGE S SERIES (S660, S670, S680, S690) 1) AWS0408 SHEAVE, STS ALUMINUM 1 2) AWS0367 BELT 3VX ) AWS0292 HOSE AND HARNESS PRTCR, STS 1 4) AWS0236 M12 X ) 5/16 NC X 1 ¼ HEX BOLT 2 6) 5/16 NC NYLOCK NUT 2 EXCHANGED ITEMS: 7) AWS0409 SHEAVE, STS ALUMINUM; S SERIES 1 17

18 JOHN DEERE 50/60 WALKER COMBINE MOUNT CHASSIS ASSEMBLY 1) AWS0331 JD 50 SERIES CHASSIS ASSEMBLY 1 2) AWS0312 CHASSIS CENTER, 50 SERIES 1 3) AWS0127 FAN SHAFT ASSEMBLY, 14 1 (See breakout p. 24) 4) AWS0039 U-BOLT, 3 PLATED 2 5) AWS0033 BUSHING, SDS 1-1/8 1 6) AWS0136 SHEAVE, 3Vx ) AWS0261 IDLER ARM, TORSION TYPE 1 8) AWS0260 BUSHING, IDLER ARM 5-5/8 1 9) BOLT, 1/2 NC X 6-1/2 1 10) FLANGED HEX NUT, 1/2 6 11) AWS0112 SPACER, 1/2 X 2-3/8 1 12) FLAT WASHER, 1/2 2 13) AWS0111 IDLER, A DRIVE, COMBINE 1 14) BOLT, 1/2 NC X 4-1/2 3 15) FLAT WASHER, 3/8 6 16) AWS0019 BUSHING, TENSIONER 1 17) BOLT, 3/8 NC X 7/8 1 18) AWS0259 SPRING, TORSIONAL 1 19) BOLT, 3/8 NC X ) FLANGED HEX NUT, 3/8 4 21) AWS0333 SHEILD, 50 SERIES COMBINE 1 22) AWS0233 CM GOLD DECK WASHER 6 23) AWS0234 FLAT SIDE WASHER 2 24) BOLT, 1/2 NC X 1-1/2 2 25) BOLT, 1/2 NC X 3/4 3 26) BOLT, 1/2 NC X 1-3/4 1 27) AWS0227 SPACER, ½ X

19 JOHN DEERE 9000/10 SERIES COMBINE MOUNT CHASSIS ASSEMBLY *9500 AND 9510 MODEL SHOWN 1) AWS0144 MOUNT BEAM (SEE 9400 & 9600 BELOW) 2) AWS0146 MOUNT BRACKET, 00 SERIES 1 3) AWS0192 MOUNT BRACKET PLATE 1 4) AWS0113 IDLER ARM 1 5) AWS0019 BUSHING, TENSIONER 2 6) BOLT, 3/8 NC X 3 4 7) 3/8 NC LOCKNUT 6 8) AWS0128 FAN SHAFT ASSEMBLY, ) 3/8 NC X 1 ¼ BOLT 2 10) AWS0017 SPACER ½ X 3 ½ 1 11) ½ FLAT WASHER 3+ 12) AWS0111 IDLER, A DRIVE, COMBINE 1 13) ½ NC LOCKNUT 1 14) AWS0226 SPACER ½ X ½ 1 15) 1/2 NC X 6 ½ BOLT 1 16) AWS0033 BUSHING, SDS 1-1/8 1 17) AWS0136 SHEAVE; 3VX ) AWS0039 U-BOLT, 3 PLATED 2 19) AWS0014 SPRING EXTENSION 1 20) 7/16 FLAT WASHER 1 21) 7/16 NC X 5 BOLT 1 22) 7/16 NC JAM NUT 1 23) 3/8 NC FLANGE NUT 8 24) AWS0333 SHIELD; JD 1 25) 3/8 NC X 1 BOLT 6 26) AWS0034 KEY; ¼ X ) ½ NC X ¾ BOLT 3 28) ½ NC X 1 ¾ BOLT 1 29) AWS0073 KEY; 3/16 X 2 1 * INTERCHANGE MOUNT BEAMS DEPENDING ON COMBINE MODEL JD JD AWS0145 AWS

20 50 SERIES DRIVE COMPONENTS: 1) AWS0411 SHEAVE 60 SERIES CONV. 1 2) AWS0316 WASHER, SS 1 3) AWS0139 3VX BELT 1 4) 3/8 NC X 1 ¾ HEX BOLT /10 SERIES DRIVE COMPONENTS: 1) AWS0315 SHEAVE, ALUMINUM OFFSET 1 2) AWS0316 WASHER, SS 1 3) AWS0139 3VX BELT 1 4) 3/8 NC X 2 HEX BOLT 6 20

21 JOHN DEERE 600 SERIES MOUNT ARMS JD 600 OUTER MOUNT ARMS; AWS0404 1) AWS0477 JD MOUNT ARM BRACKET 1 2) AWS0398 SPACER, 1/2 X 1-7/8 1 3) AWS0538 ROLLER, 1-7/8 1 4) AWS0487 JD MOUNT ARM TUBE 1 5) TOP LOCK NUT, 1/2 5 6) BOLT, 3/8 NC X 3/4 1 7) BOLT, 1/2 X 2-1/2 1 8) BOLT, 1/2 X 3 4 9) BOLT, 3/8 X ) FLANGE HEX NUT, 3/8 2 21

22 JOHN DEERE 640FD MOUNT ARMS JD640FD CENTRE MOUNT BRACKET: 1) AWS0543 JD600 CENTRE MOUNT BRACKET 1 2) AWS0399 MOUNT ARM TUBE 1 3) AWS0359 MOUNT ARM SLIDE 1 4) ¼ NC X ¾ THREADCUT HEX TYPE F1 5) ½ NC X 3 HEX BOLT 2 6) ½ NC STOVER LOCKNUT 3 7) ½ NC X 2 HEX BOLT 1 8) 3/8 NC X 1 HEX BOLT 3 9) 3/8 NC LOCKNUT 2 AWS0584 JD 640FD MOUNT ARM; LEFT 1) AWS0542 MOUNT ARM BRKT. LEFT; JD640FD 1 AWS0544 MOUNT ARM BRKT. RIGHT; JD640FD 1 2) AWS0399 MOUNT ARM TUBE; JD600, 3020, 740C 1 3) AWS0359 JD MOUNT ARM SLIDE 1 4) AWS0459 SPACER ½ X 2 1 5) ½ NC X 3 HEX BOLT 3 6) ½ NC STOVER LOCKNUT 4 7) 3/8 NC FLANGE HEX NUT 2 8) 3/8 NC X ¾ HEX BOLT 2 9) ½ NC X 2 ½ HEX BOLT 1 10) ¼ NC X ¾ THREAD CUT HEX TYPE F SS 2 11) 3/8 NC X ¾ HEX BOLT 1 *LEFT AND RIGHT SETS ARE IDENTICAL EXCEPT FOR BOLT DIRECTION AND MOUNT ARM BRACKETS. 22

23 JOHN DEERE 900 MOUNT ARMS AWS0245 JD 900 MOUNT ARM ASSEMBLY, LEFT 1) AWS0104 JD MOUNT ARM BASE, LEFT 1 2) AWS0207 JD MOUNT ARM TUBE 1 3) AWS0359 JD MOUNT ARM SLIDE 1 4) AWS0109 ADJUSTMENT LINK, ) 1/4 X 3/4 THREAD CUT TYPE F 2 6) BOLT, 1/2 X 1 1 7) TOP LOCK NUT, 1/2 2 8) BOLT, 1/2 X 3 1 9) FLANGE HEX NUT, 1/2 1 10) BOLT, 3/8 X 3-1/2 1 11) FLAT WASHER, 1/2 2 12) BOLT, 3/8 NC X 3/4 1 AWS0246 JD 900 MOUNT ARM ASSEMBLY, RIGHT 1) AWS0105 JD MOUNT ARM BASE, LEFT 1 2) AWS0207 JD MOUNT ARM TUBE 1 3) AWS0359 JD MOUNT ARM SLIDE 1 4) AWS0109 ADJUSTMENT LINK, ) 1/4 X 3/4 THREAD CUT TYPE F 2 6) BOLT, 3/8 NC X 3/4 1 7) BOLT, 1/2 X 3 1/2 2 8) TOP LOCK NUT, 1/2 2 9) BOLT, 1/2 X ) FLANGE HEX NUT, 1/2 1 11) FLAT WASHER, 1/2 2 12) BOLT, 1/2 X

24 JOHN DEERE COMBINE MOUNT FAN SHAFT ASSEMBLIES STS: AWS0129 Fan Shaft Assembly; 25 1) AWS0221 FAN SHAFT, 25 STS 1 2) AWS0222 FAN SHAFT HOUSING, ) AWS0036 SNAP RING, 1-1/8 EXT. 1 4) AWS0037 BEARING, FANSHAFT RS C3 2 5) AWS0073 3/16 X 2 KEY 1 6) AWS0034 ¼ X 2 KEY 1 50 SERIES: AWS0127 Fan Shaft Assembly; 14 1) AWS0035 FAN SHAFT, ) AWS0036 SNAP RING, 1-1/8 EXT. 1 3) AWS0037 BEARING, FANSHAFT RS C3 2 4) AWS0038 FAN SHAFT HOUSING, ) AWS0073 3/16 X 2 KEY 1 6) AWS0034 ¼ X 2 KEY /10 Series: AWS0128 Fan Shaft Assembly; 11 1) AWS0182 FAN SHAFT, ) AWS0183 FAN SHAFT HOUSING, ) AWS0036 SNAP RING, 1-1/8 EXT. 1 4) AWS0037 BEARING, FANSHAFT RS C3 2 5) AWS0073 3/16 X 2 KEY 1 6) AWS0034 ¼ X 2 KEY 1 24

25 CASE CHASSIS ASSEMBLY PRIMARY 1) AWS0015 CASE COMBINE MT CHASSIS 1 2) AWS0003 BEARING, 1-3/8 WR UNA207-22G 2 3) AWS0001 BEARING FLANGE, PF ) AWS0420 FLANGE, GREASABLE, PF207-G 2 5) WASHER, 1/2 10 +/- 6) BOLT, 3/8 X 1 9 7) CARRIAGE BOLT, 3/8 X 1 6 8) AWS0011 KEY, 5/16 X 2 2 9) FLANGE NUT, SER. 3/ ) AWS0280 SHEILD, PRIMARY CASE NH 1 11) AWS0255 SHAFT, SECONDARY COMBINE 1 12) AWS0251 SHEAVE, 3Vx ) AWS0305 BUSHING, SDS 1-3/8 1 14) BOLT, 1/2 X 6-1/2 2 15) BOLT, 1/2 X ) FLAT WASHER 1/2 5 +/- 17) AWS0258 IDLER, CASE COMBINE MT. 1 18) NUT, STOVER 3/8 1 19) AWS0337 SPACER, 1/2 I.D. X 1-3/8 1 20) AWS0019 BUSHING, TENSIONER 3 21) BOLT, 3/8 X 1-1/4 1 22) FLANGE NUT, SER. 1/2 2 23) AWS0261 IDLER ARM, TORSION TYPE 2 24) AWS0259 SPRING, TORSION TYPE 2 25) NUT, STOVER 1/2 1 26) AWS0279 SHEILD, SECONDARY CASE NH 1 27) AWS0289 SHEAVE, 3Vx ) AWS0028 BUSHING, SK 1-3/8 1 29) AWS0018 SPACER, 1/2 I.D. X 1-3/ ) AWS0111 IDLER, A DRIVE, COMBINE 1 31) AWS0136 SHEAVE 3Vx ) AWS0033 BUSHING, SDS 1-3/8 1 33) AWS0034 KEY 1/4 X ) AWS0039 U-BOLT, ) AWS0260 BUSHING, IDLER ) AWS0127 FANSHAFT ASSEMBLY, ) AWS0486 BELT, 3Vx

26 CASE CHASSIS ASSEMBLY SECONDARY 1) AWS0254 CASE COMBINE MT CHASSIS 1 2) AWS0003 BEARING, 1-3/8 WR UNA207-22G 2 3) AWS0001 BEARING FLANGE, PF ) AWS0420 FLANGE, GREASABLE, PF207-G 2 5) WASHER, 1/2 10 +/- 6) BOLT, 3/8 X 1 9 7) CARRIAGE BOLT, 3/8 X 1 6 8) AWS0011 KEY, 5/16 X 2 2 9) FLANGE NUT, SER. 3/ ) AWS0280 SHEILD, PRIMARY CASE NH 1 11) AWS0255 SHAFT, SECONDARY COMBINE 1 12) AWS0251 SHEAVE, 3Vx ) AWS0305 BUSHING, SDS 1-3/8 1 14) BOLT, 1/2 X 6-1/2 2 15) BOLT, 1/2 X ) FLAT WASHER 1/2 5 +/- 17) AWS0258 IDLER, CASE COMBINE MT. 1 18) NUT, STOVER 3/8 1 19) AWS0337 SPACER, 1/2 I.D. X 1-3/8 1 20) AWS0019 BUSHING, TENSIONER 3 21) BOLT, 3/8 X 1-1/4 1 22) FLANGE NUT, SER. 1/2 2 23) AWS0261 IDLER ARM, TORSION TYPE 2 24) AWS0259 SPRING, TORSION TYPE 2 25) NUT, STOVER 1/2 1 26) AWS0279 SHEILD, SECONDARY CASE NH 1 27) AWS0289 SHEAVE, 3Vx ) AWS0028 BUSHING, SK 1-3/8 1 29) AWS0018 SPACER, 1/2 I.D. X 1-3/ ) AWS0111 IDLER, A DRIVE, COMBINE 1 31) AWS0136 SHEAVE 3Vx ) AWS0033 BUSHING, SDS 1-3/8 1 33) AWS0034 KEY 1/4 X ) AWS0039 U-BOLT, ) AWS0260 BUSHING, IDLER ) AWS0127 FANSHAFT ASSEMBLY, ) AWS0486 BELT, 3Vx

27 CASE 66 DRIVE COMPONENTS 1) AWS0640 COUPLER DISC 1 2) AWS0642 COUPLER HUB 1 3) AWS0290 CASE 66 PLATE 1 4) AWS0436 BUSHING, SD 1 ½ 1 5) ¼ NC X 1 ¼ HEX BOLT 3 6) 3/8 NC X 1 ¼ HEX BOLT 3 7) AWS0474 SHAFT, NH ) AWS0426 #29 WOODRUFF KEY- 3/8 2 9) AWS0640b DISC PACK BOLT 6 10) M10 X 1.5 HEX FLANGE NUT 6 11) AWS0252 3VX BELT 1 12) AWS0437 BUSHING, SF 1 ½ 1 13) AWS0300 SHEAVE 3VX ) AWS0003 BEARING, 1 3/8 1 15) AWS0001 BEARING FLANGE, PF ) AWS0420 BEARING FLANGE, GREASABLE 1 17) AWS0291 CASE 66 BEARING SUPPORT 1 18) 3/8 NC X ¾ CARRIAGE BOLT 3 19) 3/8 NC HEX FLANGE NUT 11 20) AWS0299 SUPPORT ANGLE, 66 CASE 1 21) 3/8 NC X 1 HEX BOLT 5 22) AWS0285 CASE HARNESS PROTECTOR 1 23) AWS0277 CASE DOOR 1 24) AWS0278 CASE LOWER PANEL 1 25) 3/8 NC X 1 TRUSS HEAD SCREW 3 26) AWS0298 CASE 66 PLATFORM SUPPORT 1 ITEM# PART# DESCRIPTION QTY. 27) AWS0282 CASE PLATFORM SUPPORT PLATE 1 28) ½ NC X 2 HEX BOLT 2 29) ½ NC X 8 HEX BOLT 2 30) ½ NC STOVER LOCKNUT 2 31) 3/8 FLAT WASHER 3 32) ½ FLAT WASHER 2 27

28 CASE 88 DRIVE COMPONENTS 1) AWS0256 SHEAVE, ALUMINUM CASE ) ¼ NC X 1 ¼ HEX BOLT 6 3) AWS0278 CASE LOWER PANEL 1 4) AWS0277 CASE DOOR 1 5) AWS0285 CASE HARNESS PROTECTOR 1 6) 3/8 NC X 1 TRUSS HEAD SCREW 3 7) 3/8 NC HEX FLANGE NUT 3 8) AWS0281 CASE 88 PLATFORM SUPPORT 1 9) AWS0282 CASE PLATFORM SUPPORT PLATE 1 10) ½ NC X 8 HEX BOLT 2 11) ½ NC STOVER LOCKNUT 2 12) ½ NC X 2 HEX BOLT 2 13) AWS0252 3VX BELT 1 28

29 CASE 1020 MOUNT ARM BRACKETS LEFT ASSEMBLY RIGHT ASSEMBLY CASE 1020 MOUNT ARMS: 1) AWS0106 CASE MOUNT ARM TUBE 1 2) AWS0233 GOLD DECK WASHER 1 3) AWS0206 CASE MOUNT ARM TAB 2 4) AWS0109 ADJUSTING LINK, ) BOLT, 3/8 NC X 3/4 2 6) BOLT, 1/2 X 3 1 7) FLANGE NUT, 1/2 1 8) BOLT, 1/2 X 3 1/2 1 9) BOLT, 1/2 X 1 OR 4 BOLT, 3/8 X 1 DEPENDING ON REEL STYLE 10) TOP LOCK NUT, 1/2 1 11) NUT, 1/2 OR 3/8 4 29

30 CASE 2020/NH 74C & 973 MOUNT ARM BRACKETS CASE 2020 NH 74C & 973 LATE MODEL (HC REEL) (Bill of materials is for both left and right sets) CASE 2020 NH 74C EARLY MODEL ( U-2 REEL) (Bill of materials is for both left and right sets) 1) AWS0108 AGCO/NH MOUNT ARM, RIGHT 1 2) AWS0107 AGCO/NH MOUNT ARM, LEFT 1 3) AWS0109 ADJUSTING LINK, ) STOVERLOCK NUT, 1/2 4 5) BOLT, 3/8 NC X 3/4 2 6) BOLT, 1/2 NC X 3 2 7) BOLT, 1/2 NC X 4 2 1) AWS0357 AGCO/NH U-2 MOUNT ARM, R 1 2) AWS0356 AGCO/NH U-2 MOUNT ARM, L 1 3) AWS0109 ADJUSTING LINK, ) STOVERLOCK NUT, 1/2 4 5) BOLT, 3/8 NC X 3/4 2 6) BOLT, 1/2 NC X 3 2 7) BOLT, 1/2 NC X 4 2 EXPLODED VIEWS FOR BOTH HC AND U-2 REELS: LEFT ASSEMBLY RIGHT ASSEMBLY 30

31 CASE 3020/NH 740CF MOUNT ARM BRACKETS CASE 3020/ NH 740CF AWS0513 CNH 3074 MOUNT ARM ASSEMBLY CONSISTS OF: 1) AWS0507 CNH 3074 MOUNT ARM BRACKET 1 2) AWS0487 MOUNT ARM TUBE 1 3) AWS0459 SPACER, 1/2 X 2 1 4) AWS0538 ROLLER, 1-7/8 1 5) BOLT, 1/2 X 3 4 6) STOVERLOCK NUT, 1/2 4 7) BOLT, 1/2 X 2-1/2 1 8) FLANGE HEX NUT, 3/8 1 9) BOLT, 3/8 X 2-1/2 1 10) STOVERLOCK NUT, 3/8 1 11) BOLT, 3/8 NC X 3/4 1 31

32 NH CHASSIS ASSEMBLY * CASE/NH COMBINE MOUNTS SHARE THE SAME ARRANGEMENTS WITH SOME PARTS BEING INTERCHANGED FOR OTHERS. ONLY INTERCHANGED PARTS ARE LABELLED. SEE CASE CHASSIS ASSEMBLY DRAWINGS FOR A MORE DETAILED DRAWING IF NEEDED. NH FIXED SPEED CHASSIS NH VARIABLE SPEED CHASSIS (OUTSIDE MOUNT). 1) AWS0390 NH CHASSIS 1 NH VARIABLE SPEED CHASSIS (INSIDE MOUNT). 1) AWS0390 NH CHASSIS 1 2) AWS0516 SHEAVE; 5VX ) AWS0390 NH CHASSIS 1 2) AWS0516 SHEAVE; 5VX ) AWS0021 SECONDARY SHAFT 1 4) 7/16 NC X 5 HEX BOLT 1 5) 7/16 FLAT WASHER 1 6) AWS0014 SPRING, EXTENSION 1 7) ½ NC X 6 ½ HEX BOLT 1 8) ½ NC STOVER LOCKNUT 1 9) ½ NC X 4 HEX BOLT 1 10) AWS0531 NH IDLER ARM 1 11) AWS0337 SPACER, ½ X 1 3/8 1 12) ½ NC FLANGED LOCKNUT 1 32

33 NH DRIVE COMPONENTS NH FIXED SPEED DRIVE: NH FIXED SPEED DRIVE B.O.M 1) AWS0641 NH DRIVE PLATE 1 2) AWS0640 COUPLER DISC 1 3) AWS0642 COUPLER HUB 1 4) AWS0436 BUSHING; SD 1 ½ 1 5) AWS0640b DISC PACK BOLT 6 6) AWS0474 SHAFT, NH ) M10 X 1.5 HEX FLANGE NUT 6 8) AWS0426 #29 WOODRUFF KEY- 3/8 2 9) AWS0300 SHEAVE; SVX ) AWS0437 BUSHING; SF 1 ½ 1 11) AWS0252 3VX BELT 1 12) AWS0472 NH FIXED SUPPORT; UPPER 1 13) AWS0471 NH FIXED SUPPORT 1 14) AWS0473 NH FIXED LOWER SUPPORT 1 15) AWS0003 BEARING; 1 3/8 1 16) AWS0001 BEARING FLANGE, PF ) AWS0420 BEARING FLANGE; GREASABLE 1 18) 3/8 NC FLANGED HEX NUT 13 19) 3/8 NC X 1 BOLT 10 20) 3/8 NC X ¾ CARRIAGE BOLT 3 21) ¼ X 1 ¼ HEX BOLT 3 NH VARIABLE SPEED DRIVE 1) AWS0389 SHEAVE MOUNT NH 1 2) AWS0392 5VX1500 BELT; NH VAR. SPEED 1 OUTSIDE MOUNT USED FOR: NH INSIDE MOUNT USED FOR: NH

34 NH 74C & 973/CASE 2020 MOUNT ARM BRACKETS CASE 2020/ NH 74C & 973 LATE MODEL (HC REEL) (Bill of materials is for both left and right sets) CASE 2020/ NH 74C EARLY MODEL ( U-2 REEL) (Bill of materials is for both left and right sets) 1) AWS0108 AGCO/NH MOUNT ARM, RIGHT 1 2) AWS0107 AGCO/NH MOUNT ARM, LEFT 1 3) AWS0109 ADJUSTING LINK, ) STOVERLOCK NUT, 1/2 4 5) BOLT, 3/8 NC X 3/4 2 6) BOLT, 1/2 NC X 3 2 7) BOLT, 1/2 NC X 4 2 1) AWS0357 AGCO/NH U-2 MOUNT ARM, R 1 2) AWS0356 AGCO/NH U-2 MOUNT ARM, L 1 3) AWS0109 ADJUSTING LINK, ) STOVERLOCK NUT, 1/2 4 5) BOLT, 3/8 NC X 3/4 2 6) BOLT, 1/2 NC X 3 2 7) BOLT, 1/2 NC X 4 2 EXPLODED VIEWS FOR BOTH HC AND U-2 REELS: LEFT ASSEMBLY RIGHT ASSEMBLY 34

35 NH 740CF/CASE 3020 MOUNT ARM BRACKETS NH 740CF / CASE 3020 AWS0513 CNH 3074 MOUNT ARM ASSEMBLY CONSISTS OF: 1) AWS0507 CNH 3074 MOUNT ARM BRACKET 1 2) AWS0487 MOUNT ARM TUBE 1 3) AWS0459 SPACER, 1/2 X 2 1 4) AWS0538 ROLLER, 1-7/8 1 5) BOLT, 1/2 X 3 4 6) STOVERLOCK NUT, 1/2 4 7) BOLT, 1/2 X 2-1/2 1 8) FLANGE HEX NUT, 3/8 1 9) BOLT, 3/8 X 2-1/2 1 10) STOVERLOCK NUT, 3/8 1 11) BOLT, 3/8 NC X 3/4 1 35