Salesmaker Series Pumps And Dispensers Illustrated Parts Manual

Transcription

1 PT-599B Salesmaker Series Pumps And Dispensers Illustrated Parts Manual For use with -H, -4A and Pro-Blender

2 COMPUTER PROGRAMS All Gilbarco computer programs (including software on diskettes and within memory chips) are copyrighted by, and shall remain the property of, Gilbarco Inc. Such computer programs may also contain trade secret information. The duplication, disclosure, modification, or unauthorized use of computer programs are strictly prohibited, unless otherwise licensed by Gilbarco. FCC WARNING This equipment generates, uses, and can radiate radio frequency energy. Equipment not installed according to manufacturer s instructions may interfere with radio communications. This equipment has been tested and complies with the limits for a Class A computing device pursuant to Subpart J of Part 5 of FCC Rules. These rules provide reasonable protection against such interference in a commercial environment. However, the operation of this equipment in a residential area is likely to cause radio interference. The user is required to correct this interference at his/her own expense. PERMISSIONS PATENTS Gilbarco has been given permission by OPW and Asco to use their illustrations. Gilbarco products are manufactured or sold under one or more of the following U.S. patents. 3,4,934 4,6,653 4,566,504 4,90,0 4,6,033 4,93,3 4,, 4,93,5 4,99,940 4,939,30 4,96,445 5,03,434 5,09,00 D.36,4 Additional U.S. and foreign patents pending. READ NFPA 30A AND NFPA 0. WARNING Dangerous enviroment. Failure to service this equipment in accordance with NFPA 30A and NFPA 0 could result in severe injury or death. Read, understand and follow NFPA 30A and NFPA 0. Before servicing the equipment, the service person must read, understand and follow NFPA 30A and NFPA 0. The failure to service the equipment in accordance with NFPA 30A and NFPA 0 may adversely effect the safe use and operation of the system. For safe and proper equipment service, Gilbarco recommends that only the following contractors service pumps/dispensers licensed electricians trained and authorized contractors Service people must have full knowledge and complete understanding of servicing pumps and dispensers in accordance with the following: National Electric Code (NFPA 0) The Automotive and Marine Service Code (NFPA 30A) Other state and local codes may also apply. Instructions for other equipment, such as submerged turbine pumps (STPs), shear valves, leak detectors, and underground tanks, must be provided by the equipment manufacturer. Gilbarco does not provide service instructions for other manufacturer's equipment. This document is subject to change without notice. Salesmaker -H, Salesmaker -4A, and Salesmaker Pro Blender 99 Gilbarco Inc. All Rights Reserved PT-599B Salesmaker Series Illustrated Parts Manual /9

3 Table of Contents How to Order... Model Number Breakdowns... Hydraulics Model Number... Salesmaker -H and 4A Electronics Model Number...4 Salesmaker Pro Blender Electronics Model Number...5 Hydraulics Modules... 6 Salesmaker-H Dispenser...6 Salesmaker-4A Dispenser...6 Salesmaker Pro Blender Dispenser... Salesmaker 4A Pump... Frame and Sheathing... Discharge Piping... 9 Salesmaker-H Dispensers...9 Salesmaker-4A Pumps and Dispensers...0 Salesmaker Pro Blender Dispenser... Discharge Castings Standard... Discharge Castings Blending...3 Feedline Piping... 4 Salesmaker-H and 4A Dispensers...4 Salesmaker-4A Pumps...6 Salesmaker Pro Blender Dispenser... Valves... 0 PA Pressure Regulating Valve...0 Proportional Flow Control Valve... Dual Flow Solenoid Valve... PT-599B Salesmaker Series Illustrated Parts Manual /9 Page i

4 Table of Contents Meter... 3 Totalizer and Pulser Assembly...4 Putdown Assembly... 6 PUS Pump... Motor Assembly Sump Assembly... 3 Vapor Barrier... 3 Light Conduit Assembly Speaker Assembly Junction Box and Conduit Assemblies...36 Salesmaker-H and 4A Dispensers...36 Salesmaker-4A Pumps...3 Salesmaker Pro Blender Dispenser...40 Electronics... 4 Electronics Module...4 Modular Electronics Card Cage...44 Modular Electronics Power Supply...45 PPU Box Assembly Salesmaker-H & 4A...46 PPU Box Assembly Salesmaker Pro Blender...49 Programmable Pump Preset Salesmaker Pro Blender...50 Cable Assemblies All Models...5 Page ii PT-599B Salesmaker Series Illustrated Parts Manual /9

5 Model Number How Breakdowns to Order. Please furnish model numbers (Hydraulics and Electronics) and date code of unit. The Hydraulics model number and date code are stamped on a plate riveted to the side sheathing. The Electronics model number is stamped on a plate riveted to the Electronics module. Domestic Export * MFG. BY GILBARCO INC. GREENSBORO N.C. U.S.A. Date Code MODEL SERIAL NO. HYDRAULIC MODEL NO. TRANSAC HX AMA BA05365 ACZPDKBOAJ00 Date Code HX MODEL AMA SERIAL BA05365 UNLEADED SUPER U L UNDERWRITERS LABORATORIES INC MFG. BY GILBARCO INC. GREENSBORO N.C. U.S.A. POWER OPERATED DISPENSING DEVICE FOR FLAMMABLE LIQUIDS FOR USE ONLY WITH UL LISTED INTERCHANGEABLE SERVICE STATION TYPE HOSE NOZZLE VALVE TRANSAC DISPENSING DEVICE NO. H SERIAL NO. MODEL NO. ACZPDKBOAJ00 MFG. BY GILBARCO INC. GREENSBORO N.C. U.S.A. * Some export models use domestic plate.. When ordering parts supply the following information: Quantity needed Part number Description of part Color and Graphics for order entry items When Inquiring about part numbers by phone please be prepared to reference the following specifics from the manual: Example: PT-599B, Plate, Page 9 Item:, (Qty.):, Part Number: R64-G, Description: Upper Discharge Line R64-G Upper Discharge Line PT-599B Salesmaker Series Illustrated Parts Manual /9 Page

6 Model Number Breakdowns Hydraulics Model Number AC XXXXXXXX X X X rd digit - Design Style Y Salesmaker Pro Blender Z Salesmaker -H and Salesmaker-4A 4 th digit - Unit Type A Dispenser P Salesmaker-4A Self Contained Pump 5 th digit - Number of Products, D Dual Two-Product, Salesmaker-4A Two Sided F Dual One-Product, Salesmaker-H, Two Sided G Single Product, Salesmaker-H, Single Sided U Multi-Blend, Salesmaker Pro Blender, Two Sided V Multi-Blend, Salesmaker Pro Blender, Single Sided 6 th digit - Nozzle Boot and Totalizer B Vapor Recovery Nozzle Boot, U.S. Gallons Tot., V/R Nozzle Hook G Standard Nozzle Boot, Metric Tot. J Vapor Recovery Nozzle Boot, U.S. Gallons Tot., Std. Nozzle Hook K Vapor Recovery Nozzle Boot, Metric Tot., Std. Nozzle Hook N Vapor Recovery Nozzle Boot, Imperial Gallons Tot., Std. Nozzle Hook th digit - Hydraulic Function B Preset Page PT-599B Salesmaker Series Illustrated Parts Manual /9

7 Model Number Breakdowns th digit - Hydraulics Type 0 Hydraulics for Pump M Value Analyzed Hydraulics N Value Analyzed Hydraulics for Coaxial Hose and Nozzle P Hydraulics for Salesmaker Pro Blender 9 th digit - Vapor Recovery Specifications A Non Vapor Recovery B Full Vapor Recovery, Gilbarco Discharge Fittings C Vapor Ready, Gilbarco Discharge Fittings E Full Vapor Recovery, Emco-Wheaton Discharge Fittings F Vapor Ready, Emco-Wheaton Discharge Fittings G Full Vapor Recovery, Blend at Nozzle L Non Vapor Recovery, Blend at Nozzle. 0 th digit - Frame Specifications 0 Salesmaker Pro Blender A Salesmaker-4A, 94" High, Solid Upper Housing, Domestic C Salesmaker-H, 94" High, Solid Upper Housing, Domestic F Salesmaker-H, 94" High, Open Upper Housing, Domestic G Salesmaker-4A, 94" High, Open Upper Housing, International H Salesmaker-4A, 94" High, Open Upper Housing, Domestic J Salesmaker-4A, 94" High, Solid Upper Housing, International M Salesmaker-H, 94" High, Solid Upper Housing, International T Salesmaker-H, 94" High, Open Upper Housing, International, th and 3 th digits Minor Variations, International Specifications PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 3

8 Model Number Breakdowns Salesmaker-H and 4A Electronics Module CP XX X X X X X X X X Basic Model Number Modular Electronics Minor Options 0 - Standard Series Special Options 09 - Salesmaker-H 0 - Standard Dispenser 0 - Salesmaker-4A 5 - Pump, Single Phase Power 6 - Pump, Three Phase Power Hose Configuration Customer Option Location - One Hose - None - Two Hose 3 - External 4 - Four Hose Source Voltage Customer Options 0-5VAC 60Hz 0 - Standard - 0VAC 50/60Hz - Pump Preset - 30VAC 50/60Hz - Cash/Credit 3 - Variable Voltage 3 - Cash/Credit and Pump Preset Main Display Configuration Display System 0 - Standard 0 - Decimal - Single Sided 3 - Comma Thirteen digit electronics model number is stamped on plate attached to bottom of electronics module. 3 F F 9 0 SERIAL NO. MODEL CP NO. MFG. BY GILBARCO INC. GREENSBORO N.C. U.S.A. Page 4 PT-599B Salesmaker Series Illustrated Parts Manual /9

9 Salesmaker Pro Blender Electronics Module Model Number Breakdowns CP4 X X X X X X X XX X Basic Model Number Modular Electronics Special Options 0 - Standard - Venezuela Series Blend Code 0 - Salesmaker Pro Blender 0 - Programmable 0 thru 99 - Fixed Hose Configuration Grade Configuration - One Hose 3-3 Grade - Two Hose 4-4 Grade 5-5 Grade Source Voltage Reserved for Future Use 0-5VAC 60Hz 0 - Standard - 0VAC 50/60Hz - 30VAC 50/60Hz 3 - Variable Voltage PPU Display System Options 0 - Decimal 0 - Standard - Comma - Cash/Credit - Programmable Preset Thirteen digit electronics model number is stamped on plate attached to bottom of electronics module. PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 5

10 Hydraulics Module Salesmaker -H Dispenser A-Side B-Side Salesmaker -4A Dispenser A-Side B-Side Page 6 PT-599B Salesmaker Series Illustrated Parts Manual /9

11 Hydraulics Module Salesmaker Pro Blender Dispenser A-Side B-Side Salesmaker -4A Pump A-Side B-Side PT-599B Salesmaker Series Illustrated Parts Manual /9 Page

12 Discharge Frame and Piping Sheathing Plate Frame and Sheathing All Models 3 T046 Support Housing Cover (Closed, Black) T60 Sheathing 94" (Outer, Sstl.) K35340 Sheathing 94" Kit (Blk.) Includes hardware 3 T06-0 Sheathing 94" (Inner, Sstl.) T06-0 Sheathing 94" (Inner, Blk..) 4 0 Q0-4 Screw #0-3 x " Sstl. 0 Q0-4 Screw #0-3 x " Blk. 0 K9099 Nylon Washer (Blk.) 5 W05 Meter Shelf (Dispensers) 5 4 W05-0 Meter Shelf (Pumps) 6 T636 Reveal Bracket (RH) 4 R565 Panel Lock Bracket T635 Reveal Bracket (LH) 9 ** Q90-05 Nut 5/6-0 ** K0565 Screw 5/6- x " T4 Lower Shelf 4 K3463 Panel Lock and Keys - K35-5 Keys Only 3 T64-XX* Lower Panel Assy. (w locks) T64-G4* Lower Panel Assy. (Stainless with Locks) 3 T64-G5* Lower Panel Assy. (45 White with Locks) 4 T-G Welded Base 5 ** K3533 Panel Locating Pin Kit ** K Screw 5/6- x 3/4" T96-G3 Column Assy. 94" W060 Upper Piping Support (Salesmaker-H & 4A) 5 W06-0 Upper Piping Support (Salesmaker Pro Blender) * Order entry items. Specify color and graphics. ** Quantity as needed. Page PT-599B Salesmaker Series Illustrated Parts Manual /9

13 Discharge Piping Plate Salesmaker -H Dispensers R64-G Upper Discharge Line * N590-0 Plug 3 4 N30 Stiffening Plate 4 W060-G Upper Vapor Line 6 5 T03 Lifting Bracket 6 K Coupling " K95 Pipe Clamp 3 T405 Pipe Clamp Bracket 9 K03 Straight Fitting 0 K9006 Clamp Hook T65-G Lower Vapor Line N4 Pipe Clamp Bracket 3 R69-G Meter Discharge Line (Left, facing junction box) 9 R5-0 Meter Discharge Line (Right, facing junction box) *Quanitity varies with unit Side View Top View PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 9

14 Discharge Piping Plate 3 Salesmaker -4A Pumps and Dispensers R64-G Upper Discharge Line T06-G Upper Discharge Line 3 4 N30 Stiffening Plate 4 W060-G Upper Vapor Line 6 5 T03 Lifting Bracket 6 K Coupling " K95 Pipe Clamp 3 T405 Pipe Clamp Bracket 9 4 K03 Straight Fitting 0 4 K9006 Clamp Hook 9 4 T65-G Lower Vapor Line N4 Pipe Clamp Bracket 3 R5-0 Meter Discharge Line (Left, facing junction box) 4 R66-04 Meter Discharge Line (Right, facing junction box) Side View Top View Page 0 PT-599B Salesmaker Series Illustrated Parts Manual /9

15 Discharge Piping Plate 4 Salesmaker Pro Blender Dispenser R6-G Upper Discharge Line R63-G Upper Discharge Line 3 N30 Stiffening Plate 4 T36-G Upper Vapor Line 6 5 T03 Lifting Bracket 6 K Coupling " K95 Pipe Clamp 3 T405 Pipe Clamp Bracket 9 4 K03 Straight Fitting 0 4 K9006 Clamp Hook T65-G Lower Vapor Line N4 Pipe Clamp Bracket R5-0 Meter Discharge Line (Left, facing junction box) 4 R66-04 Meter Discharge Line (Right, facing junction box) 5 4 See Plate 0 Pressure Reg. Valve Side View Top View PT-599B Salesmaker Series Illustrated Parts Manual /9 Page

16 Discharge Piping Plate 5 Discharge Castings Standard 3 R496-3 Nipple 3/4" x " (Vapor Only) Q09-0 Elbow 3/4" x 90 deg. M/F (Vapor Only) 3 K603 Elbow 3/4" 90 deg. M/M 4 4 Q9-04 Bolt /4-0 x 3/4" 5 N30 Stiffening Plate 6 N956-G Co-axial Hose Casting K35 Co-axial Hose Casting Kit (Includes,,4 and 6) N5-0* Non-Vapor Hose Coupling (Black) N590-0* Vapor Recovery Plug (Attach with a and b) a K0394-4* Carriage Bolt /4-0 x 3/4" Frame Ref. b Q06-05* Hex Nut /4-0 9 K3539 Breakaway Adapter Kit (Not Shown, Includes hardware to add Hose Breakaways) 0 K354 Vapor Recovery Hose Adapter Kit (Not Shown, For vapor ready models using standard hoses) *Non Vapor models only. Quantity shown per hose position. Page PT-599B Salesmaker Series Illustrated Parts Manual /9

17 Plate 6 Discharge Castings Blending 4 3 Discharge Piping K603 Elbow 3/4" x 90 deg. M/M R496- Nipple 3/4" x -3/4" (Vapor only) 3 Q09-0 Elbow 3/4" x 90 deg. M/F (Vapor only) 4 4 Q09-04 Bolt /4-0 x 3/4" 5 N303 Stiffening Plate T30-0 Upper Casting 3 Q0069- O-Ring -/" x -/" x 3/6" W064-0 Vapor Recovery Casting (Blend in casting) K35446 Casting Kit, blend in casting (Includes,,) 9 T56-0 Hose Casting (Blend at nozzle, dual hose) K3546 Casting Kit, blend at nozzle (Includes,9,) 0 T396-0 Non Vapor Hose Casting (Blend in casting) K3544 Non Vapor Hose Casting Kit (Includes,0,) W Vapor Recovery Casting (Tri-axial, blend in hose) K3546 Tri-axial Hose Casting Kit (Includes,, ) 6 Q09-09 Screw /4-0 x -/" PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 3

18 Feedline Piping Plate Salesmaker -H and 4A Dispensers d a c b e 5 f Salesmaker -4A shown Page 4 PT-599B Salesmaker Series Illustrated Parts Manual /9

19 Feedline Piping Plate : Salesmaker -H and 4A Dispensers K9 Union -/" K0360- Elbow -/" x 45 deg. M/F (Salemaker-H only) 3 R493-3 Nipple -/" x 3-/" (Salesmaker-H only) 4 R493-6 Nipple -/" x -5/" 5 W050- Feedline Manifold 6 W050-3 Feedline Manifold (Salesmaker-4A) 6 Q006-0 O-Ring -5/6" x -9/6" x /" 4 PA Solenoid Valve (Includes a-f) a W0454- Filter Base b R405-0 Cap c 4 Q065-0 Screw /4-0 x 3/4" d 4 K503 Lockwasher /4" e K45 Diaphragm Spring f K93006 Diaphragm g - K35 Valve Rebuild Kit (Not shown, includes e,f) 9 K35364 Filter Cap/Strainer Kit 3/4" - R3 Strainer Only 0 4 K54 Filter, Standard 3/4" N60 Filter, Water Alert 3/4" N3 Filter, Gasahol 3/4" R-05 Feedline assy. R-06 Feedline Assy. 3 6 Q9-04 Screw /4-0 x 3/4" PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 5

20 Feedline Piping Plate Salesmaker -4A Pumps 9 0 To Meter To Meter To PUS Pump 5 6 Page 6 PT-599B Salesmaker Series Illustrated Parts Manual /9

21 Feedline Piping Plate : Salesmaker -4A Pumps N36-G Riser Tube Assy. K46 Elbow " x 90 deg. F/F 3 R Nipple " x -3/4" 4 K0360- Elbow " x 45 deg. F/F 5 R495-0 Nipple " x -/" 6 See Plate 0 Pressure Reg. Valve Assy. R495-0 Nipple " x -5/" K03-0 Elbow " x 90 deg. M/F 9 R3 Filter Head, High Capacity 0 K35369 Filter Cap/Strainer Kit, High Capacity - R9 Strainer Only R9-0 Filter 0 Micron, High Cap. R9-30 Filter 30 Micron, High Cap. R90 Filter, Water Alert (High capacity) K0309A03 Reducer Tee "/3/4"/3/4" 3 K935-0 Union 3/4" C x M 4 N354-G Soldered Tube Assy. 5 See Plate Dual Flow Solenoid Valve 6 T50-G Soldered Tube Assy. R Nipple 3/4" x -/" K545G0 Meter Flange 9 Q006-4 O-Ring 0 R9345-G Soldered Tube Assy. PT-599B Salesmaker Series Illustrated Parts Manual /9 Page

22 Feedline Piping Plate 9 Salesmaker Pro Blender Dispenser Page PT-599B Salesmaker Series Illustrated Parts Manual /9

23 Feedline Piping Plate 9: Salesmaker Pro Blender Dispenser K9 Union -/" R493-6 Nipple -/" x -5/" 3 K09 Plug /4" 4 6 Q9-04 Cap Screw /4-0 x 3/4" 5 T660-0 Feedline Manifold 6 4 Q006-0 O-Ring -5/6" x -9/6" x /" 4 N509-0 Manifold Flange 6 Q065-0 Bolt /4-0 x 3/4" 9 R Nipple 3/4" x -/" 0 4 R599-0 Filter Base K35364 Filter Cap/Strainer Kit R3 Strainer Only 4 K54 Filter, Standard N60 N3 Filter, Water Alert Filter, Gasahol 3 4 See Plate Proportional Flow Control Valve 4 R56-G Feedline Assy. 5 R5-G Feedline Assy. 6 4 Q006-4 O-Ring PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 9

24 Valves Plate 0 PA Pressure Regulating Valve All Models Q065-0 Screw /4-0 x 3/4" N390-0 Cover 3 Q006-6 O-Ring (-/" x ") 4 K04- Stem Guide 5 K49 Retaining Ring 6 K935 Pressure Spring N955-G Check Valve Assy. (Includes a-e) a N309 Relief Valve b K Pal Nut /-0 c K04 Flat Washer /" a b c d d K33 Disc e R54 Valve Stem R039- Body 9 3 K503 Lockwasher /4" e Page 0 PT-599B Salesmaker Series Illustrated Parts Manual /9

25 Valves Plate Proportional Flow Control Valve Salesmaker Pro Blender Dispenser a b d c R59-0 Proportional Flow Control Valve (Includes a-d) a K35356 O-Ring Replacement Kit b R59-0 Hydraulic Valve Assy. c R59-03 Solenoid Assy. d R59-04 Casting PT-599B Salesmaker Series Illustrated Parts Manual /9 Page

26 Valves Plate Dual Flow Solenoid Valve Salesmaker -4A pump c R6 Dual Flow Solenoid Valve (Includes a-e) a R6-0 Diaphragm Assy. b R6-0 Diaphragm Spring c R6-6 Coil Assy. d R6- O-Ring e R6-06 O-Ring d b a e Page PT-599B Salesmaker Series Illustrated Parts Manual /9

27 Meter Plate 3 Gilbarco C Meter All Models K35 Quad Ring Kit (Includes Quad Ring Shaft Seal, Seal Cap Gasket, 3 Screws, Seal Wire, Seal Installation Sleeve, Seal Removal Tool, Seal Cap Alignment tool) N54-04 Valve Seal O-Ring 3 K35359 Gasket and O-Ring Kit (Includes 4 Cylinder Cover Gaskets, Inlet/Discharge Flange O-Rings and Cover O-Ring) 4 4 N5 Formed Piston Cup 5 K3536 Adjuster Cylinder Cover Kit (Includes Adjuster Packing, Pin and Seal Wire) 6 Q006-4 Lower Housing O-Ring PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 3

28 Totalizer & Pulser Assembly Plate 4 Totalizer and Pulser Assemblies All Models 4d 5 4b 4a 9 6b 6a,a 0 6c 3 4 b c e 4c 4f 5 Page 4 PT-599B Salesmaker Series Illustrated Parts Manual /9

29 Plate 4: Totalizer and Pulser Assemblies All Models Totalizer & Pulser Assembly T350-G Pulser Assy. 4a Totalizer and Coupling Assemblies R466 Pulser Bracket 3 Q064-0 Bolt 5/6- x 3/4" 4 - K0644 Meter Seal Wire N94-G N94-G N303-G U.S. Gallons Metric Imperial Gallons 5 K55- Cotter PIn 6 R456 Gear and Bracket Assy. US Gallons (Includes 6a-6c, -) 6a N09-0 Bracket Assy. (US Gallons) 6b K39 Gear (US Gallons) 6c K39-0 Gear (US Gallons) R39-G Gear and Bracket Assy. Metric (Includes a-c, -) a N99-G Bracket Assy. (Metric) b N953 Gear (Metric) c K39-03 Gear (Metric) Q0-09 Retaining Ring (Push-on) 4b R6-03 RH Totalizer Bracket R6-04 LH Totalizer Bracket 4c N94-0 Cable Stabilizer Bracket 4d Q0-36 Screw 6-3 x /" 4e Q90-0 Nut 6-3 4f K056-3 Nyliner 5 K999-9 Flexible Shaft 6 K536-0 Screw -3 x /4" K4365 Bolt /4-0 x 3/4" Q90-04 Nut /4-0 *Quantity shown per assembly. 9 K63-36 Retaining Ring 3/" 0 N Washer 3/" K60 Set Screw 5-40 x 5/3" K63-3 Retaining Ring 3/" 3 N90 Stabilizer Bracket 4 Totalizer and Bracket Assemblies (Includes 4a-4f) R5-G9 R5-G0 R5-G R5-G R60-G3 R60-G4 RH U.S. Gallons LH U.S. Gallons RH Imperial Gallons LH Imperial Gallons RH Metric LH Metric PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 5

30 Putdown Assembly Plate 5 Putdown Assembly All Models 5b 4a 5a 5 5b 3 4b 4d 5a 3 4a 4b 6 9 4c 4e 4f 0 Salesmaker 4A shown Page 6 PT-599B Salesmaker Series Illustrated Parts Manual /9

31 Putdown Assembly Plate 5: Putdown Assembly All Models Putdown Assemblies (Includes -4) T-G T-G T60-G Salesmaker-4A (Standard unleaded nozzle hooks) Salesmaker-4A (Vapor Recovery unleaded nozzle hooks) Salesmaker-H, Salesmaker Pro Blender (Std. unleaded nozzle hooks) T60-G Salesmaker-H, Salesmaker Pro Blender (Vapor Recovery unleaded nozzle hooks) * R63 Wrapper Gasket 3 * Q9-0 Bolt /4-0 x /" 4a R60-0 Rubber Putdown Strip (LH) 4b R60-0 Rubber Putdown Strip (RH) 5a T44 Putdown End Cap (LH) 5b T44 Putdown End Cap (RH) 6 * T66 Switch Bracket * Q90-04 Nut /4-0 * K3535 Extension Spring with Washers 9 * K909 Switch Assy. 0 * K93405 Bracket * Q03- Screw 6-3 x /4" * K05 Bolt /4-0 x /" 3 * Q Nut 3/6" Push-on 4 * Wrapper Assemblies (Includes 4a-4f) R566-G R566-G3 * Quantity varies with model. ** Order entry items. With Standard Unleaded Nozzle Hook With Vapor Recovery Unleaded Nozzle Hook 4a W059- Wrapper, Black W059-3 Wrapper, White 4b K93400-G Switch Lever Assy. 4c K660-0 Washer 4d K60 Groove Pin /" x3/4" 4e R549- Vapor Recovery Nozzle Hook, Unleaded 4f R494-3 Standard Nozzle Hook, Unleaded 5 * T60-3 Vapor Nozzle Boot Assy. with Black Scuff Guards (Includes 5a-5b) 5a W Nozzle Boot 5b R909-0 Black Scuff Guard Set 6 N09-XX** Start/Stop Plate T664 Putdown Bottom Plate T663-G Putdown Cover Plate (Not shown, attach with Q0-0 Speed Nuts) Nozzle Operated Putdown Assembly for Salesmaker 4A Pump (Parts not shown, export only) A T44-05 Nozzle Boot Assy. (Includes A-A5) A K94 Switch and Bracket Assy. A R43-04 Nozzle Boot A3 K90946 Nozzle Flap A4 N54 Nozzle Guide A5 N53-03 Flap Shaft and Hub Assy. B T444 Wrapper Assy. C N360-0 Nozzle Hook PT-599B Salesmaker Series Illustrated Parts Manual /9 Page

32 PUS Pump Plate 6 PUS00-G Pump and Air Separator 3 4 5c 5d 6 9 5e 0 6,6a 5a b or 0 9 Page PT-599B Salesmaker Series Illustrated Parts Manual /9

33 PUS Pump Plate 6: PUS00-G Pump and Air Separator R5-0 Air Separator Body (3/4" Discharge) K05-0 Filter Retainer (Inner) 3 K693 Separator Filter 4 K05-0 Filter Retainer (Outer) 5 K35 Seal Kit (Includes 5a-5e) 5a Q006-5 O-Ring -3/4" x " x /" 5b Q006- O-Ring -/" x -3/" x /" 5c N449 Separator Gasket 5d Q50-56 Pump Gasket 5e K4 Lip Seal 6 6 K665 Blade K35 Blade Kit (Includes 6, 5d, 5e) K46 Blade Spacer N50- Rotor and Shaft Assy. 9 K339- Key 0 N03-6 Pump Pulley R Pipe Nipple (-/" x -3/4") K9 Union (-/") 3 N95 Strainer 4 K4535e03 Strainer Cap 5 K Relief Valve Cap 6 K939 Relief Valve Spring 3PSI 6a K Spacer, Bypass.3" N30 Relief Valve Q63-0 Elbow 3/" x 90 deg. 9 K353 Strainer/Check Valve Kit 0 Q000-0 Elbow /" x 90 deg. Q09-0 Set Screw 5/6- x 3/" 3 K00 Screw #0-4 x 3/" Quantity shown per pump. PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 9

34 Motor Assembly Plate Motor Assembly 6 3b 3a 3c 4 3e 3d 3f R43-03 Motor, 60Cy, 3/4HP or R43- Motor, 50Cy, 3/4HP or R43- Motor, 50Cy, 3/4HP 3 Phase R900- Motor Pulley or R900-3 Motor Pulley, 3 Phase 3 K96 Idler Pulley Bracket Assy. (Includes 3a-3f) 3a N366-0 Idler Pulley 3b K0943 Nut 3/" 3c K505 Lockwasher 3/" 3d K95 Spacer 3e N Flatwasher 4 R06-49 Motor Belt 34.0" 5 N03-6 Pump Pulley 6 K34- Spacer 0 Q90-05 Nut 5/6- T0594- Pump/Motor Support Plate 9 4 K4553 Bolt 5/6- x /" 0 K364 Shockmount 4 N Flatwasher 4 K366 Spacer 3 4 Q064-0 Bolt 5/6- x 3/4" 4 T50 Support Plate Bracket 5 K339- Key, Hi-Pro 606 #9 Special 3f Q645-0 Carriage Bolt Page 30 PT-599B Salesmaker Series Illustrated Parts Manual /9

35 Plate Sump Assembly PA Sump Assembly Q000-0 Elbow Fitting /" 90 deg. T605-G Return Tube Q000- Elbow Fitting 3/" 90 deg. 4 R9446-G Inlet Tube 0 5 K49606 Float Spring 6 K4 Float and Spool Assy. Q504-0 Straight Fitting 3/" 9 K4360 Ferrule 3/" 9 Q505-0 Nut 3/" 5 0 R94 Vent Tube 3/" N6-0 Vent Screen Assy. Q064-0 Bolt 5/6- x 3/4" 3 Q90-05 Nut 5/6-6 4 R9344 Sump Bracket 5 Q9- Cap Screw 3/"-6 x/" K5553 Valve Lever Pin K456-0 Valve Lever K503A Valve 9 4 K504 Lockwasher 5/6" 0 N33 Baffle Plate N3 Valve Spring K536-5 Screw 0-3 x /" 4 3 K9356 Flow Control Ball 4 N366 Gasket 5 N60 Filter Putdown Module Ref. 6 Q095-0 Brass Nut 9/6-4 PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 3

36 Vapor Barrier Plate 9 Vapor Barrier Salesmaker -H, 4A 3 4 B Plugged A Plugged B B B Plugged A Wire Conduit Ref. Wire Conduit Ref. Salesmaker Pro Blender Plugged 3 B Plugged 4 B Plugged A Wire Conduit Ref. * R649-G IS Barrier (Switch) Hole "A" Wire Conduit Ref. * T33-G0 IS Barrier 5VAC (Pulser) Hole "B" * T344-G IS Barrier 30VAC (Pulser) Hole "B" 3 * K96 Conduit Lock Nut 4 * N Flatwasher 5 T03-G Wire Bundle Assy. (Not Shown, Hydraulics to Electronics) * Quantity varies with model. Page 3 PT-599B Salesmaker Series Illustrated Parts Manual /9

37 Light Conduit Assembly Plate 0 Light Conduit Assembly,9, Side View R59-06 Light Conduit, Upper N69- Expansion Union /" 3 T36 Light Conduit, Lower 4 K44 Elbow 90 deg. x /" 5 N300-0 Light Conduit Front View Q00-0 Union K96 Conduit Nut /" 9 N Flatwasher 0 R90-G Nipple and Wire Assy. K444 Elbow 90 deg. x /" 6 K999 Nipple PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 33

38 Speaker Assembly Plate Speaker Assembly Optional 6 5 A 4 3 B C Side View Front View Page 34 PT-599B Salesmaker Series Illustrated Parts Manual /9

39 Speaker Assembly Plate : Speaker Assembly Optional A K44 Elbow 90 deg. x /" T633-G Conduit Assy. 5 Cutaway View 3 3 K604 Conduit Coupling 4 R639-0 Conduit 5 Q094-0 Junction Box 6 K904 Connector Box K944 Wire Clip Bracket Q0-0 Cable Tie 9 Q Locknut B 0 Q Bushing T66 Speaker Box N3030 Gasket Top View 3 Q0-36 Screw 4 R34-0 Speaker 5 R9-G Cover Plate 6 R605 Speaker Conduit K909 Tubing Clamp C K04 Conduit Nipple 9 Q Conduit Union 0 R9060 Speaker Box Bracket K4303 Conduit Nipple K6434 Locknut Side View PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 35

40 Junction Box and Conduit Assemblies Plate Salesmaker -H and 4A Dispensers a Salesmaker -4A Shown Page 36 PT-599B Salesmaker Series Illustrated Parts Manual /9

41 Junction Box and Conduit Assemblies Plate : Salesmaker -H and 4A Dispensers W045-0 Junction Box Cover 5 K4365 Bolt /4-0 x3/4" - K3505 Cover Kit (Includes,) 3 W Junction Box 4 * K0 Pipe Plug /" 5 R5654-G Varistor Assy. 5VAC R5654-G3 Varistor Assy. 30VAC 6 * N3059 Pilot Valve 5VAC N Pilot Valve 30VAC 6a * N Coil 5VAC N Coil 30VAC 6b * N Valve Rebuild Kit N9-G Inlet Tube K Outlet Tube 9 N9-G Inlet Tube 0 K Outlet Tube T0-G Conduit and Wire Assy. K96 Conduit Nut 3 N Conduit Washer 4 K Inlet Tube** 5 K9343-G Outlet Tube** 6 K9344-G Outlet Tube** K9300 Inlet Tube** * Q Elbow /4" x 90 deg. 9 * Q Straight Connector /4" 0 K54 Pilot Valve Plug 3/4"-6 K444 Elbow /" x 90 deg. K9364 Union Elbow /" x 90 deg. 3 T0-G Conduit and Wire Assy. * Quantity varies with model. ** Salesmaker-4A only. PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 3

42 Junction Box and Conduit Assemblies Plate 3 Salesmaker -4A Pumps To Solenoid Valve 9 6 To Solenoid Valve To Solenoid Valve To Solenoid Valve 4 To Motor To Motor Page 3 PT-599B Salesmaker Series Illustrated Parts Manual /9

43 Plate 3: Salesmaker -4A Pumps Junction Box and Conduit Assemblies R400-0 Junction Box Cover 6 K0565 Bolt 5/6- x " 3 T056-0 Junction Box 4 R5654-G Varistor Assy. 5VAC R5654-G3 Varistor Assy. 30VAC 5 Q00-0 Conduit Union /" (F/F) 6 R9353 Conduit ("B" Side) K506 Conduit Nipple /" x -/" K44 Elbow /" x 90 deg. (F/F) 9 3 Q Conduit Union /" (M/F) 5 R99-5 Conduit Nipple /" x 3-/" 6 3 K999 Conduit Nipple /" x " N359 Conduit Body /" K39 Conduit Nipple /" x -/" 9 R045 Outlet Box 30 T53-G3 Conduit and Wire Assy. 3 T53-G Conduit and Wire Assy. (Single Phase) T53-G5 Conduit and Wire Assy. (Three Phase) 0 T53-G Conduit and Wire Assy. (Single Phase) T53-G4 Conduit and Wire Assy. (Three Phase) K0954 Bolt 3/-6 x -/" K505 Lockwasher 3/" 3 K0943 Nut 3/-6 4 K0 Pipe Plug /" 5 R96-33 Conduit Nipple /" x 3-/" 6 Q00-0 Conduit "Y" /' x /" x 3/4" 0 K444 Elbow /" x 90 deg. (M/F) K49 Reducer 3/4" to /" K04 Nipple /" x -/4" 9 K49306 Elbow /" x 45 deg. 0 6 N69-0 Expansion Union (M/F) K506 Conduit Nipple /" x " R59-0 Motor Conduit 90 deg. bend 3 R9365 Motor Conduit 4 3 K9364 Elbow /" x 90 deg. (M/F) PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 39

44 Junction Box and Conduit Assemblies Plate 4 Salesmaker Pro Blender Dispenser Page 40 PT-599B Salesmaker Series Illustrated Parts Manual /9

45 Plate 4: Salesmaker Pro Blender Dispenser Junction Box and Conduit Assemblies W045-0 Junction Box Cover 5 K4365 Bolt /4-0 x 3/4" - K3505 Cover Kit (Includes -) 3 W Junction Box 4 K94-0 Terminal Strip 5 R5654-G Varistor Assy. 5VAC R5654-G3 Varistor Assy. 30VAC 6 K03 Pipe Plug " K0 Pipe Plug /" 9 K444 Elbow /" x 90 deg. (M/F) 9 3 K44 Elbow /" x 90 deg. (F/F) 0 K4434 Nipple /" x -/" Q00-0 Union /" K660 Conduit Nipple /" x -3/" 3 K9364 Elbow /" x 90 deg. (M/F) 4 T0-G3 Conduit and Wire Assy. 5 K96 Conduit Nut 6 N Conduit Washer K09 Conduit Nipple /" x -/" K5 Conduit Nipple /" x -/" 9 N959 Conduit /" 0 N960 Conduit /" T0-G4 Conduit and Wire Assy. K999 Conduit Nipple /" x " PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 4

46 Electronics Plate 5 Electronics Module All Models F F a 0b 0c 0d 0e 0f Page 4 PT-599B Salesmaker Series Illustrated Parts Manual /9

47 Electronics Plate 5: Electronics Module All Models T64-GX* Bezel Assy. (Includes -) T6049-GX* Bezel Assy. with Sunshades (Includes -5, 0a-0f) R59-0* Blank Brand Panel 4 Q09-0 Bezel Mounting Bolt (/4-0 x 3-/4") Q09-09 Bezel Mounting Bolt, behind door (/4-0 x -/") T603-GS6 Housing, Black 3 R55-GX* Door and Lock Assys. T603-GS9 Housing, White R55-G* Door and Lock Assy (English with Logo) R55-G3* Door and Lock Assy. (Blank, Black w/o Logo) 4 Q044-0 or Lock & Key (Sstl) Q044-0 Lock & Key (Black) K Key Only 5 Q "U" Shaped Gasket 6 4 Q65-6 Screw #6 x /" Face Plate* or R55 or Order Entry for Graphics Blanking Plate, Black R55-0 Blanking Plate, Grey R5596 Gasket 9 ** Bezel Glass Kits (Includes 6-)* K96 K90335 U.S. Gallons Liters 0 ** Sunshade Faceplate Kits (Includes 0a - 0f) K96-XX* Order Entry for Graphics K96-0 Standard Graphics 0a 4 Q65-4 Screw #6 x 3/" 0b R966-0 "U" Channel Stiffener 0c R50 Faceplate Clamp 0d R959-0 Lexan Faceplate Window 3 ** T66-G3S SID Display Bd., Decimal (Domestic) T66-GS SID Display Bd., Comma (Export) 4 T9-G Operator Panel Assy. 5 T549-G Operator Membrane Switch 6 ** Q065-0 Standoff 3/6" K504 Nut Retainer 4 K Lamp Socket 9 4 N4 Leaf Spring 0 4 Q0-3 Screw #6-3 x 5/" N44-G Fluorescent Lamp (Modified w. Ground Strips) ** K536-5 Screw 0-3 x /" 3 See Plate 6 Modular Card Cage 4 See Plate Modular Power Supply 5 T6093-G or Valve Driver Assy. (Salesmaker Pro Blender) T66-G Relay Assy. (SM4A Pumps) Single Phase Only 6 Q6-0 Square PlasticPlug (Not Shown) Q Vent Plug (Not Shown) Q06-04 Nut #0-3 * Order entry items. Specify color and graphics for bezel assemblies, suffix S6 denotes black, S9 denotes white. ** Quantity varies with model. 0e R Gasket 0f T50-XX* Tiered Faceplate PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 43

48 Electronics Plate 6 Modular Electronics Card Cage All Models T-G3 Card Cage (Includes 6-) T69-GS Customer Interface Board 3 4 Q56-04 Circuit Board Support /" 4 Q63-0 Transducer, Audio (Beeper) 5 Q0-0 Cable Tie 6 0 Q Card Guide 4.5" 3 Q Card Guide " T549-GS Hydraulic Interface Board (Salesmaker-H & 4A) or T659-GS Hydraulic Interface Board (Salesmaker Pro Blender) 9 T33-GS Customer Programmable Preset Controller Board K9336-GS Customer Programmable Preset Software Kit V 40.X 0 T54-GS Pump Controller Board K963-GS Controller Software Kit T6394-GS Display Power Board T55-GS or T3-G Main Regulator Board Page 44 PT-599B Salesmaker Series Illustrated Parts Manual /9

49 Electronics Plate Modular Electronics Power Supply All Models K Main Power Supply 5VAC (Includes Item 5) K Main Power Supply 0/30/40VAC (Includes Item 5) Q-0 Fuse Holder 3 Q03-6 F Fuse (4Amp, 50VAC, Slo-Blo) 4 Q03-03 F Fuse (3Amp, 50VAC, Slo-Blo) 5 N0-G6 Voltage Select Plug, 5V N0-G Voltage Select Plug, 0V N0-G9 Voltage Select Plug, 30V N0-G0 Voltage Select Plug, 40V 6 Q955-0 Battery, V,.5Amp Q0-06 Tie Wrap, Battery Q90-0 Transformer (5-40VAC) PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 45

50 Electronics Plate PPU Box Assembly Salesmaker -H and 4A Pumps and Dispensers CD Module a 4 5 9c 9b 3a 3b 3c 3d 3 6a, 6b 6 4a, 4b, 4c 6c Page 46 PT-599B Salesmaker Series Illustrated Parts Manual /9

51 Electronics Plate : PPU Box Assembly Salesmaker -H and 4A Pumps and Dispensers T0-XX* PPU Box Assy. (Includes -) T65-G3 PPU Box Only 3 Cash/Credit & Pump Preset Panel Assys. (Includes 3a-3d) T095-G Salesmaker-H, C/C or C/C and P/P T095-G Salesmaker-4A, C/C or C/C and P/P T095-G3 Salesmaker-H and 4A, P/P Only 3a ** Q Nut #6-3 3b ** K Flatwasher #6 3c ** K94 Filter 3d ** K95-0 Gasket 4 T34-G or T34-G or Cash/Credit Assy. Pump Preset Assy. T34-G3 Cash/Credit & Pump Preset Assy. 4a Q099-0 Rubber Boot 4b Q Red Lens Q044-0 or Lock and Keys (Sstl.) Q044-0 Lock and Keys (Black) ** K Keys Only 9 T60-G3 or PPU Display Panel Assy. Salesmaker-H (Includes 9a-9c) T60-G4 PPU Display Panel Assy. Salesmaker-4A (Includes 9a-9c) 9a T6-G Panel 9b ** T339-GS PPU Display Board Assy. 9c ** Q Circuit Bd. Support 3/" 0 T645-G Relay Assy. (3 phase pumps only) Q09-0 Ballast Assy. 30VAC Q046-0 Ballast Assy. 0VAC Q99-0 Side Gasket /4" wide 3 Q99-0 Top Gasket /" wide * Order entry items. Specify color and graphics. ** Quantity varies with model. 4c Q03-09 Lamp 4v, 3/4amp 4d K Attaching Harware 5 T09-XX** Plastic Graphics Panel 6 T44-G Salesmaker-H & 4A Programmable Preset Panel Assy. (Includes 6a-6c) 6a R995-G Programmable Preset Display Assy. T06-XX* Keypad Overlay T06-0 Keypad Overlay (Generic English Graphics) 6b R96 Display Glasket 6c Q09- Lock and Keys (Black) T6-G Blank Panel Assy. PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 4

52 Electronics Plate 9 PPU Box Assembly Salesmaker Pro Blender Dispenser CD Module a 0 5a 5c 5b 3b 3c 3d 3e 3f 3 Page 4 PT-599B Salesmaker Series Illustrated Parts Manual /9

53 Electronics Plate 9: PPU Box Assembly Salesmaker Pro Blender Dispenser T6-XX* PPU Box Assy. (Includes -) T65-G3 PPU Box Only 3 Front Panel Assys. (Includes 3a-3f) T64-G3 T64-G T64-G T6-G Three Grade Four Grade Five Grade Blank Panel (Black) (Includes 3f only) 3a ** Q Nut #6-3 3b ** K Flatwasher #6 3c ** K94 Filter 3d ** K95-0 Gasket 3e ** R69-0 Rubber Switch Actuator 3f Q09- Lock and Keys (Black) - Q09-5 Key 4 T665-G Membrane Switch Assy. (Includes 4a-4b) 4a T666-G Backup Panel R6-G Fan Sub Assy. T99-G Valve Driver Power Supply 9 T69-GS Customer Interface Bd. 0 4 Q Circuit Bd. Support /" 4 Q06-03 Nut #-3 Q Nut #-3, Single Thread 3 Q99-0 Side Gasket /4" wide 4 Q99-0 Top Gasket /" wide * Order entry items. Specify color and graphics. ** Quantity varies with model. Front Panel Assembly Venezuela Models Only A T4-G Front Panel Assy. (5 Grade, LED Membrane Switches & No PPUs) B 5 R5-G LED Assy. & Support C T4-G Membrane Switch Assy. 4b T669-G Membrane Switch Panel 5 T60-G5 or T60-G4 or T60-G or 5a T6-G Panel PPU Display Panel Assy. Three Grade (Includes 5a-5c) PPU Display Panel Assy. Four Grade (Includes 5a-5c) PPU Display Panel Assy. Five Grade (Includes 5a-5c) 5b ** T339-GS PPU Display Board Assy. 5c ** Q Circuit Bd. Support 3/" 6 Q09-0 Ballast Assy. 30VAC Q046-0 Ballast Assy. 0VAC PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 49

54 Electronics Plate 30 Programmable Pump Preset Salesmaker Pro Blender Dispenser 3 F F 9 0 R995-G Display/Keypad Assy. T06-XX* Keypad Overlay T06-0* Keypad Overlay (English Std. Graphics) 4 Q65-6 Screw #6 x /" 3 - Retrofit Kits (Not shown, includes Item, Preset Contoller Cables, Hardware and Software) K Side "A" K Side "B" Page 50 PT-599B Salesmaker Series Illustrated Parts Manual /9

55 Electronics Cable Assemblies All Models Description Where Used Part Number Associated Plugs and Jacks Main Cable Harness Salesmaker-H and 4A T094-G J60, J50, J0, E, J35, P40, P40, J60, J03, J504, WT, WT, WT5, WT, BUZA, BUZ B Salesmaker Pro Blender W0405-G P40, P40, J603, J0, BUZ A+, BUZ B+, J504, BUZ AC, BUZ BC, J06, J03, J0, J0 (A,B), BUZ A-, BUZ B-, J30, J304, J04, J33 (A,B), E, E, E3, J05, J50, J60 Main Display Power All T6503-G P60, J30, J0A/B, J33A/B, J304 Controller to Hydraulic Interface Salesmaker-H and 4A R996-G J0, J05 Salesmaker Pro Blender T60-G00 J03, J0 Controller to Operator Keypad Salesmaker-H and 4A R36-G J03, J90, P90 Salesmaker Pro Blender R36-G3 J03, J90, P90 Controller to Customer Interface Salesmaker Pro Blender T656-G00 J3, J0, P0A Controller to Displays All T64-G J04, J0A, J0B, J00A, J00B Salesmaker-H and 4A R355-G P00A, J0 Salesmaker-H and 4A R355-G P00B, J0 Controller to Main Regulator All R995-G J0, J05 Main Regulator to Display Power All R994-G J30, J503 Main Display toppu Box All R494-G J04, J0 Display Power Salesmaker Pro Bender PPU Box T69-G P33, J PPU Display All PPU Boxes R393-G J4/P Customer Interface to Lighted Membrane Switch Salesmaker Pro Blender PPU Box (Front) Salesmaker Pro Blender PPU Box (Rear) R643-G R643-G J30, J34 J30, J34 Customer Int. to Grade Select Salesmaker Pro Blender T6-G J34, J35 Controller to Preset Controller to Hydraulic Interface Preset Controller to Preset Display Keypad Assy. Controller to Cash/Credit and/or Customer Preset Assy. All with PPP Option R945-G J0/J05/J4 All with PPP Option R944-G J4/J43/J6/J63 Salesmaker-H and 4A R36-G P30A, P30B, J0 Customer Interface to Membrane Switch Venezuela Pro Blender PPU Box R643-G4 P6/J30 LED Power Venezuela Pro Blender PPU Box T394-G P3/J36 PT-599B Salesmaker Series Illustrated Parts Manual /9 Page 5

56 Making Things Better TM 99 Gilbarco Inc. P.O. Box 0, 300 W. Friendly Ave. Greensboro, NC 40 Phone (99) FAX (99) Telex PT-599B 09 Printed in USA