SM-61, SM-52, SM-61A && SM-72 CUTTER DECK

Transcription

1 SM-1, SM-2, SM-1A && SM-72 CUTTER DECK STHMCD 2

2 Ref. Part No. No. Description 1 72 SM-1, SM-1A & SM-72 CUTTER DECK Ref. Part No. No.Description Cutter Deck (Includes decals) x 1 3 Cutter Deck (Includes decals) x 1 Cutter Deck, Advantage (Incl. decals) x 2 Discharge Chute x x 2 Discharge Chute, Advantage x Bolt, /1-1 x 1" Hex Head x x 00- Nut, /1-1 Elastic Stop x x Wing Nut, 3/-1 x x 0 Belt Cover (Incl. Decals) x Belt Cover (Incl. Decals x Nut, /- Hex Head x x 327 Spacer, Cutter Blade x x 2 Tapered Hub, 1. Bore x x Bolt, 1/- x 3/ Hex Head x x 73 Pulley,.3 O.D. x 7 Pulley,. O.D. x 0 Pulley, Double Groove,.3/.7 O.D. x Pulley, Double Groove,./.7 O.D. x 2 Belt, R.H. Blade Drive x 2 Belt, R.H. Blade Drive x Belt, Deck Drive x 01 Belt, Deck Drive x Lock Nut,3/-1 Hex Head x x Stud, 3/-1 x -3/" x x 00-0 Nut, 3/-1 Serr. Flange x x Bolt, 3/-1 x 2-1/" x x Flatwasher, 3/ (.31 x.3 x.) x x 2 Pulley, Belt Guide x x 00-1 Capscrew, /1-1 x 3/ Ser. Flg. HH x x Nut, 3/-1 Elastic Stop x x 23 2 Idler Pulley Support x x Bolt, Hex Head /1-1 x -1/" x x Nut, /1-1 Ser. Flg. Hex Hd. x x 2 2 Pulley,.7 x x Nut, 1/2- Ser. Flg. Hex Hd. x x Capscrew, 1/2- x 1-1/ Ser. Flg. x x Nut, 3/-1 Elastic Stop x x Flatwasher, 3/ (.31 x.3 x.) x x Pulley x x Flatwasher, 3/ (.37 x 1.0 x.00) x x Spacer x x 3 01 Idler Arm (Incl. 37 & 3) x x Bolt, 3/-1 x 2-1/" x x Idler Pivot x x Bushing, Bronze Oilite-3/ ID x x 3-0 Grease Fitting, Str. 1/-2 Self Tap. x x Flatwasher, 3/ (.77 x 1.2 x.0) x x 001-0S Flatwasher, 3/ (.77 x 1.2 x.03) x x Retaining Ring,.7 ET 'E' x x J-Rod Idler Pulley x 07 J-Rod Idler Pulley x Bolt, /1-1 x 1-1/"Hex Head x x Nut, /1-1 Ser. Flange x x Bolt, 3/-1 x 3-1/2" Hex Head x x 02 Support Assembly x x Retaining Ring, 1-1/ ET 'E' x x Bushing, Bronze Oilite- 1-1/ ID x x 32 Idler Pivot Support x x 3277 Spacer x x 0 7 Idler Arm (Incl. 3 & 7) x x 1 07 J-Rod, Drive Idler x x 2 0 Spring, Chute Return x x 3 31 Spindle Assembly x x 32 Shaft, Cutter Spindle x x 2 Seal, 2.00 O.D. x 1.0 Bore x x 22 Bearing Assembly x x 7 0 Shield, Spindle x x 77 Relief Fitting, Cutter Spindle x x 32 Spindle Housing x x 0 33 Spacer, Outside x x 1 32 Spacer, Inside x x 2 2 Seal, 2.00 O.D. x 1-/ Bore x x Spindle Bushing Bottom x x 3 Nut, 1-1/1-1 UNEF-2B x x Bolt, /- x -1/2" x x 000- Flatwasher, / (. x 1.7 x.) x x 7 0 Cutter Blade, " Standard x Cutter Blade, " Hi-Lift x 0 Cutter Blade, 2" Standard x Key, 1/ x 1/ x 2" x x Quick Pin x x 70 Shaft, Roller x x Guide, Roller x x Wheel Assy., Caster x x 73 7 Tire Only, Caster Wheel x x 73 Inner Tube Only, Caster Wheel x x 7 72 Rim Pair, Caster Wheel x x 7 70 Retainer, Caster Wheel x x 7-03 Grease Fitting, Deg. 1/-2 x x 77 Hub Assy. W/Bolts, Caster Wheel x x 7 71 Tapered Hex Nut, /1-1 x x 7 Roller Bearing, Caster Wheel x x 0 07 Caster Wheel Assembly x x Bolt, 1/2- x -1/2" Hex Head x x Nut, 1/2- Elastic Stop x x Sleeve, Caster Wheel Bearing x x 00 Caster Yoke x x Spacer, Caster Yoke 1/2" x x 0-01 Bushing, 7/ x 1" Flanged x x * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated. 3

3 ENGINE DECK SGB0A

4 ENGINE DECK Ref. Part No. Number Description Carriage Bolt, 1/- x " 2 3 Battery Box Nut, Wing 1/- 01 Battery 232 Battery Cover 0 Insulation, Battery Cover 7 22 Pad, Fuel Tank Strap 1 Cap, Fuel Tank Fuel Tank Assy. (Includes items - ) 30 Bushing, Fuel Tank Valve 30 Fuel Shut Off Valve 23 Strap, Fuel Tank 00- Phil RDHD Machine Screw 1/- x 2" Hex Nut, 1/- 1 Pad, Fuel Tank Support Carriage Bolt, /1-1 x 3/" 2377 Support, Fuel Tank 1 22 Bracket, Fuel Tank Support Serr. Fl. Hex Nut / Lockwasher, /1 Int. Tooth 7 Engine, 23 HP Kohler CV, (Spec PS-723) Hex Head CPSCR, /1-1 x 1-3/" Oil Drain Extension 2 27 Cap, Oil Drain Plug 2 Engine Deck Wire Loom,.0 I.D Washer, 1/ (.3 x.70 x.0) Bolt, Hex Head 1/2- x 2" Sleeve, Shock Absorber Mount 30 1 Shock Absorber Hex Locknut, Elastic Stop 1/ Serr. Fl. Hex Head CPSCR, 7/1- x 1" Serr. Fl. Hex Nut, 7/1-3 7 Motor - White (Includes item 2) Lockwasher, 1/2" 3A Nut, 1/2-3 2 Anchor, Brake Bolt, Hex Head 1/- x 1-1/" Serr. Fl. Hex Nut, 1/ Serr. Fl. Hex Head CPSCR, /1-1 x.7" 0 1 Parking Brake Assembly (Incl. 1-) Brake Pads- Pair Springs - Pair Actuating Arm, Incl. Pin & Clip) 1-0 Clip 2 Hub Assembly (Includes item 0) Brake Drum 7 33 Rim and Tire Assembly (Includes items, ) Tire x x, Ply 1-0 Rim Only Bolt, Hub Wheel Nut 2 0 Castle Nut, 1.0- UNEF 3 3 Spacer, Clutch Ref. Part No. Number Description Key, 1/ x 1/ x 1-1/2" 00-0 Hex Socket Set Screw, /1-1 x 3/" 72 Pulley, Engine Pump Drive (Incl. ) 7 73 Clutch, Electric (Ogura) Flatwasher, 7/1 (. x 1.7 x.2) Lockwasher, 7/1" Bolt, Hex Head 7/1- x 2.7" Hex Locknut, Elastic Stop / Backing Plate, Clutch Stop 3 1 Rubber Pad, Clutch Stop 1 Heatshield, Muffler Bolt, Hex Head /1-1 x 1-3/" 003- Key, Woodruff 3/1 x /" 7 1 Pulley, Pump Input 37 Sleeve, Idler Ring, Retaining, 1-/1 Internal 70 Belt, Pump Drive Pulley, Idler-Traction Drive (Incl.,,72) 72 2 Bearing, Idler Pulley Spacer, Idler Pump Idler Arm (includes items 7, 7) Idler Pivot Base Bushing, Oillube S Flatwasher, 3/" Ring, Retaining, 3/" Ext. "E" 7-0 Grease Fitting Hex Nut, Jam 3/ Bolt, Hex Head 3/-1 x 3-1/" 2 2 Spring, Pump Drive Idler Serr. Fl. Hex Nut, 3/ Cotter Pin, /32 x 1.0" Bolt, Hex Head 3/-1 x " Socket Head CPSCR, 1/2- x 1-1/" Lockwasher, 1/2" Flatwasher, 1/2 (.1 x.3 x.) 00 Pump, Sundstrand 0 Bracket, Oil Tank Support Bolt, Hex Head 3/-1 x 1-3/" Washer 2" OD, 3/ ID, 1 Ga Carriage Bolt, 1/- x 3/" 23 Guard, Pulley Gusset, Battery Box Support, Battery Box Carrage Bolt, /1-1 x 1" 030- Wire Loom,.7" I.D. 1 Rubber Pad 0 0 Fuel Hose, Order by the inch Clamp, Fuel Hose Bolt, 1/2- x 2.0" Nut, 1/- Elastic Stop 223 Plate, Backing * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated.

5 UPPER HYDRAULICS A A SGB027

6 UPPER HYDRAULICS Ref. Part No. Number Description 1 7 Tank, Hydraulic 2 Cap, Hydraulic Tank 3 3 Hose, Pump to Oil Cooler 2 Hose, Oil Cooler to Tank -0 Clamp, Hose 3-01 Coupling, Flare Swivel Tube, Union Oil Cooler Assembly Carriage Bolt, /1-1 x 3/" 27 Bracket, Oil Cooler 30-0 Elbow, 0 Degrees O-Ring 3-02 Coupling Flare Swivel Serr. Fl. Hex Head Nut, /1-1 1 Brace, L.H. Cooler Support 1 21 Brace, R.H. Cooler Support 00-0 Elastic Stop Nut, 1/ Serr. Fl. Hex Head CPSCR, 1/- x 3/" 2 Strap, Oil Tank 7 Filler Neck Insert 2 Hose, 1/" Pushlock, Order by the inch Clamp Bushing Degree Elbow * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated. 7

7 H G A B C D E F C G D E J F B A H J I I LOWER HYDRAULICS LOWER HYDRAULICS

8 LOWER HYDRAULICS Ref. Part No. Number Description Capscrew, 1/- x1/2 Serr. Fl. Hex Head Filter Head 3 7 Filter, Spin-On Lube 1 Hose Assembly Hose Assembly Elbow, 0 Degrees Hairpin Cotter 0 Lever, Dump Valve Connector, Flare Swivel with Hose Barb -0 Hose Clamp 2 Hose, 1/ Pushlock, Order by the inch 2 Hose, 1/ Pushlock, Order by the inch 0-01 Hose Clamp 3-01 Tee Union, Pushlock Hose 1 2 Hose, 1/ Pushlock, Order by the inch 1 3 Hose, Dump Valve 30-0 Elbow, 0 Deg. 1 Inlet Hose, 3/" ID Tee, 1/2" Run 0 Motor Hose 3 Hose, Pump To Oil Cooler Coupling, Flare Swivel Coupling, Flare Swivel With Barb Tube Union O-Ring Bushing O-Ring O-Ring O-Ring Cap Tee, Jic to O-Ring Hose, Order by the inch Compression Fitting Elbow, 0 Deg. * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated.

9 CONTROL LINKAGE 2 2 sgb0 CONTROL LINKAGE

10 Ref. Part No. Number Description CONTROL LINKAGE 1 32 Control Linkage, Bellcrank (Includes 30, 31) Flatwasher, /1 (.37 x.7 x.03) Bolt, Hex Head /1-1 x 2-3/" Bolt, Hex Head 3/-1 x 1" Flatwasher, 3/ (.0 x. x.0) 32 Sleeve, Pump Control Link 7 2 Link, Speed Control 00-0 Hex Locknut, 3/-1 Control Arm, Pump Carrage Bolt,RH SH SQNK 3/-1 x 1-1/2" Flatwasher, 3/ (.31 x.3 x.) Rod End, RH Female THD 3/ Hex Locknut, Elastic Stop 3/ Hex Nut, 3/ Control Rod 1 Bolt Hex Head, 3/-2 x -3/" 327 Bushing, Spring Keeper 1 3 Spring, Neutral Return 2 Retainer, Neutral Spring Carrage Bolt, /1-1 x 1" Serr. Fl. Hex Nut / ** Number Not Used Bolt, Hex Head 1/- x 1-1/" Hex Locknut, Elastic Stop 1/ Hex Locknut, Elastic Stop / Sleeve, Control Arm Cotter Pin, 3/32 x.7" Clevis, Pump Control Pin, Clevis 3/" 30-0 Greese Fitting, 1/-2 Self Tap Bushing, Bronze * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated.

11 INSTRUMENT PANEL AND ELECTRICAL COMPONENTS C B A D E 2 F PTO Switch Connector STHMIP&E

12 INSTRUMENT PANEL AND ELECTRICAL COMPONENTS Ref. Part No. Number Description Instrument Panel (includes Decal) 2 2 Blade Fuse, amp. 3 1 Decal, Instrument Panel 023 Hour Meter (includes Bracket and Hardware A, B, C) A * Hour Meter Bracket B * Lockwasher, # Ext. Tooth C * Hex Nut, -2 Ammeter (Includes Bracket and Hardware D, E, F) D * Ammeter Bracket E * Lockwasher, # Int. Tooth F * Hex Nut, # Phillips Rd. Head Screw, #-32 x 1-1/2" 7 2 Bracket, Fuse Holder Elastic Stop Nut, # Carriage Bolt, /1-1 x 3/" Phillips Washer Head Screw, #-32 x.0" 7 Keyswitch * Lockwasher, / Int. Tooth * Nut, Special / Ignition Key and Ring Assy. 1 1 Choke Control (includes hardware) 1 7 Throttle Control Lockwasher, # Ext. Tooth Hex Nut, # Switch, PTO 7 Wire Harness With Relay Serr. Fl. HH Nut, / Battery Bolt, Hex head 1/- x 1/2" Hex Nut 1/ Wire Harness, STHM Lockwasher /1 Int. Tooth 27 7 Engine, 22 HP Kohler CV(Spec PS-71) 2 7 Switch, Parking Brake 2 7 Switch, Foot Safety Clutch, Electric Carriage Bolt, /1-1 x 3/" Wireloom Locknut, Elastic Stop / Battery Cable, 3" Black Battery Cable, 2" Red * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated.

13 RIDER FRAME ASSEMBLY RIDER FRAME ASSEMBLY 1 1 7, STHMRFA 37 A

14 RIDER FRAME ASSEMBLY Ref. Part No. Number Description Ref. No. Part Number Description 1 71 Steering Frame (Includes Bshgs and Fittings) Bronze Bushing, 7/ ID x 1.0 Flanged Retaining Ring, 7/ external 00- Hex Nut, Elastic Stop / Flat Washer, /1 (3/ x 7/ x ga.) 02 Steering Handle (includes item 7) 7 Grip Bolt, Hex Hd., /1-1 x 1-3/" Seat Assy. (includes items thru,1,) 2 Cushion Assembly 2 Arm Pad - R.H. 2 Seat Back Cusion 27 Arm Pad - L.H Serr. Fl. HH. Nut, / Seat Adjuster Track Bolt, RDHD Carr. 3/-1 x 1-1/2 (2" & 1") Bolt, RDHD Carr. 3/-1 x 2.0" (72") 22 Seat Plate 1 22 Ballast, Seat Mount (72" cutter deck only) 00-0 Serr Fl. Hex Nut, 3/-1 2 Seat Spring Bolt, Hex Hd., 7-1- x 3-1/2" Reinforcement, Seat Spring Retaining Ring, 1-1/" external Bushing, Oilite - 1-1/ ID x 1.0 Flanged 2 00 Rear Wheel Pivot Bolt, Hex Hd., 3/-1 x 1-1/" 27 * Hex Jam Nut, 3/-2 2 * Lock Washer, 3/ Internal Tooth 2 03 Rear Wheel Yoke Hex Elastic Stop Nut, / Bolt, Hex Hd. /- x " Spacer, Rear Wheel, short Seal, Grease 3 1 Bearing Cone 3 1 Bearing Cup 3 1 Rim Only Rear Wheel Assy. (Includes items 33-3, 37A) 37A 13 Tire Only 3 30 Sleeve, Rear Wheel Spacer, Rear Wheel 0 2 Cable, Steering (Includes Hardware) 1 0 Pedal, Foot Safety Switch 2-0 Grease Fitting Hex Elastic Stop Nut, 7/1-00- Screw, Phillips flat hd #-32 x 3/" Serr. Fl. Hex Nut, 1/- Spring, Foot Safety Switch Hex Nut, Elastic Stop Lock, 1/- 7 Switch, Foot Safety Bolt, Hex Hd., 1/- x 1-3/" 0 00 Steering Shaft Retaining Ring 3/ Ext. E Bushing, oillube - 3/ ID x Foot Pedal Screw w/washer, 1/- x.7" Flat Washer, 3/ x 1-1/ x 1 Ga. 0 Foot Pedal Arm Pin, Drive Lock 3/1 x 1-1/" 0-03 Bushing, oillube - 3/ x.0 Flanged Sulky Mtg. Brkt. L.H. 0 2 Sulky Mtg. Brkt. R.H Bolt, Hex Hd., 1/2- x -1/2" 2 Pulley, Winch Cable Bushing, oillube - 1/2 ID x Flat Washer, 1/2 (.2 x 1.37 x.) 02 Retainer, Winch Cable Hex Elastic Stop Nut, 1/2-7 2 ArmRest Bracket, Left Hand Arm Rest Bracket, Right Hand * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated. 1

15 BRAKE LINKAGE Deck Weldment SGB00 1

16 BRAKE LINKAGE Ref. Part No. Number Description Serr. Fl. HH Nut, 3/ Hex Locknut, 3/ Swivel Hairpin Cotter (.0 x 1.2) Hex Head Bolt, 3/-1 x 1-1/" 32 Sleeve, Hydro Linkage 7 23 Link, Cam 32 Grip, Parking Brake 0 Handle, Parking Brake Flat Washer, 3/ (.31 x.3 x.) 00-0 Hex Nut, Elastic Stop 3/ Carriage Bolt, 3/-1 x 1-1/" Hex Head Bolt, 3/-1 x 1-3/" 23 Lever, Brake Hex Jam Nut, 3/ Washer, Neutral Lock Serr. Fl. HH CPSCR, 3/-1 x 1" 1 7 Bracket, Neutral Lock 0 Rod, Neutral Lock 1 Cable Assembly, Parking Brake R.H. 0 Cable Assembly, Parking Brake L.H Cable Winch Eye Bolt, 3/-1 R.H Hex Nut, 3/-1 * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated.

17 WHITE GREEN WHITE WHITE GREEN RED NEGATIVE HOURMETER ELECTRICAL WIRING HARNESS 13 POSITIVE HOURMETER ENGINE GND MOWER CLUTCH FUSES YELLOW W/RED STRIPE RED BLACK BLACK KEY SWITCH BLACK BLACK YELLOW BLUE BRAKE INTERLOCK FOOT PEDAL INTERLOCK GREEN NEGATIVE AMMETER POSITIVE AMMETER BLACK W/RED STRIPE RED BLACK W/RED STRIPE YELLOW TO ENGINE MOWER ENGAGEMENT PTO SWITCH CONNECTOR STARTER SOLENOID 13 WIRE HARNESS WITH RELAY PART NO. 7 RELAY SC7 BLACK RED BLUE GREEN To Engine Ground To Starter To Blue Wire From Engine To Starter Red Battery Cable Post 1

18 WINCH LIFT SYSTEM Steering Frame sgb00 Ref. Part No. Number Description Ref. No. Part Number Description 1 03 Winch Assembly (Incl. 1-7, -, 1-23) 2 1 Locknut, 7/ Ratchet Pawl Ratchet Bolt 02 Flatwasher 01 Ratchet Spacer 7 33 Ratchet Spring 27 Cable Guide 0 Winch Cable Assembly Hex Locknut, 1/ Winch Reel 00 Reel Shaft 0 Hex Locknut, 3/-1 0 Winch Handle 1 01 Handle Nut 1 3 Handle Spring 3 Shaft Bushing 1 0 Pressure Washer 0 Ratchet Wheel 32 Pressure Plate 00 Shaft Bushing 22 E-Ring Drive Shaft Serr. Flg. HH Capscrew, 3/-1 x 1" Serr. Flg. HH Nut, 3/-1 * Common hardware should be purchased locally. All bolts are grade plated; all other fasteners are zinc plated.

19 R Heavy-Duty Commercial 71 REPLACEMENT DECALS & INFORMATION 1 2, 2a, 2b 3 OFF HYDROSTATIC DRIVE MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING PATENTS:,7,00,,03,,733,7,3 PATENTS PENDING,1,32,,,, START / DRIVE PROCEDURE ENGAGE PARKING BRAKE DISENGAGE MOWER DECK DRIVE DEPRESS FOOT INTERLOCK SWITCH (LH) PEDAL START ENGINE RELEASE PARKING BRAKE SELECT FORWARD OR REVERSE SPEED WITH HYDRO CONTROL (RH) PEDAL OFF MOWER DECK PULL OUT TO ENGAGE IMPORTANT ON ALWAYS TRANSPORT WITH MOWER DECK DOWN AND LIFT CABLE SLACK. START MOW WITH WINCH CABLE SLACK TWO FULL TURNS. CAUTION BEFORE OPERATING READ OPERATINGS MANUAL AND SAFETY INSTRUCTIONS ON PARKING BRAKE FAST SLOW CAUTION PUSH IN TO DISENGAGE 1 KEEP BYSTANDERS AWAY 7,, Ref. Part No. Number Description 1 71 Decal, Heavy Duty Commercial 2 3 Decal, Scag Logo ( Cutter Deck) 2a Decal, Scag Logo (Battery Box Front) 2b 2 Decal, Scag Logo Seatback Decal, Danger-Spinning Blades 0 Decal, Warning-Rotating Blades Decal, Patent Ref. Part No. Number Description 1 Decal, Instrument Panel 7 3 Decal, Warning-Belt Cover 3 Decal, Dump Valve 0 Decal, Metalcraft-Made In USA 3 Decal, 2 3 Decal, Decal, 72

20 LUBRICATION & MAINTENANCE * Lubrication may be required every to 0 hours, depending on climate and environment. Break-In + Compatible Greases: Mobilux #2 found at Mobil Service Stations (1st Hours) Ronex MP found at Exxon Service Stations Hours (Daily) Super Lube MEP #2 & Super Stay-M #2 found at Conoco Service Stations 2 Hours Shell Alvania #2 found at Shell Service Stations 0 Hours (Weekly) Lidok EP #2 found at industrial shops 0 Hours (Biweekly) 0 Hours (Monthly) 00 Hours or Annually PROCEDURE COMMENTS Check all hardware for proper tightness Change engine oil and filter at hours Check hydrostatic oil level Check belt tension Add oil as needed - SAE W30 * Fill fuel tank before starting Check engine oil Clean blower screen Remove debris from under belt cover Sharpen cutter blades Grease spindle bearings 2 pumps of hand gun Clean air filter/check for damage or loose parts Check/clean air intake and cooling areas 1 Check tire pressure Do not over fill MORE OFTEN IF NEEDED US Lithium MP White Grease 2+ MORE OFTEN IF NEEDED MORE OFTEN IF NEEDED Add or adjust as required Service precleaner element 1 Check battery electrolyte level Distilled water only Grease caster wheel bearings Grease caster wheel pivots Grease idler arm pivots Service air cleaner element 1 Change engine oil Check spark plug condition and gap Clean cooling areas 1 Chassis grease Chassis grease Chassis grease See engine mfg. information See engine mfg. information Check all hardware for proper tightness Change engine oil filter Check hydro fluid reservoir level Clean and adjust spark plugs Grease rider frame pivot Grease control bell cranks Grease steering handle bearing Grease foot pedal bearings Grease rear wheel pivot (vertical) Grease rear wheel bearing See engine mfg. information See engine mfg. information Chassis Grease Chassis Grease Chassis Grease Chassis Grease Chassis Grease US Lithium MP White Grease 2+ Drain hydraulic system and replace fluid Change hydrostatic oil filter Use SAE W30 motor oil Clean area before removing filter 1. Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.

21 TECHNICAL SPECIFICATIONS ENGINES General Type: Brand: Models: Horsepower: Type: Displacement: Cylinders: Governor: Air Intake Group: Exhaust Group: Fuel Pump Group: Oil Pump Group: Valve Group: Starter/Electrical: Charging System: ENGINE DECK Fuel Tank: Drive Wheels/Tires: Brakes: Parking Brake: Frame: DRIVE SYSTEM Type: Hydro Pump: Drive Wheel Motors: Dump Valve: Hydro Fluid Cooling Group: Travel Control: Steering: Axles: Safety Group: Instrument Panel: Forward Speed Range: Reverse Speed Range: Heavy duty industrial/commercial Kohler 23 HP Pro Series (Spec PS-723) CV23S 300 RPM cycle gas, twin cylinder, vertical shaft engine 23HP = 7 cc 2 cast-iron sleeves Mechanical type governor with variable speed control set at 300 rpm (+0 rpm), idle set at 00 rpm (+0rpm) Large capacity dual element, chopper-type grass screen Single exhaust canister muffler Mechanical fuel pump with inline fuel filter, fixed jet carburetor with Smart-Choke and fuel shutown solenoid Positive displacement Gerotor oil pump.capacity 2.0 U.S. with filter, standard oil cooler. Hydraulic valve lifters standard volt battery with alternator, solid state ignition with key start 1 amp gallon (.0 litres) seamless polyethylene x.0- four-ply pneumatic tubeless, radius edge Integral braking with drive system Drum-type Hybrid tractor trailer frame with stabilized pivot Hydro drive with one variable displacement pump and two cast-iron high torque motors #1 cast-iron variable displacement pump with remote dump valve for movement without running engine cu. inch cast-iron high torque motors Single lever allows for movement without engine running Heavy-duty cooling radiator, qt. capacity nylon cooling reservoir, uses, SAE W30 fluid and micron filter Hydro drive with single foot pedal for forward and reverse speed control, infinitely variable speeds Aircraft-type yoke steering handle with stainless steel cable 1-1/" tapered motor shafts Foot actuated engine kill, brake interlock, blade/clutch interlock switch Ammeter, hour meter, key switch, throttle, fuses, manual choke, blade brake clutch switch 0 to. mph 0 to. mph Date of Issue: June 1, Specifications Subject to Change Without Notice 22

22 TECHNICAL SPECIFICATIONS (CON'T) CUTTER DECKS SM 1, SM1A, SM 72 Type: Out-front design with anti-scalp roller and pneumatic shock absorber for deck flotation Construction: -gauge steel with 7-gauge (3/1") steel skirt Cutting Width: 1.0 " (1.0 cm), 71." (11. cm) Cutting Height Adjustment: Adjustable from 1-3/" to -1/" in 1/" increments Cutter Blades:. thick, milled edge, alloy steel SM1: Three (3) " blades SM1A:Three (3) " blades SM72: Three (3) 2" blades Blade Engagement: Electric blade brake clutch with instrument panel switch Lift System: Patented manual winch with automatic brake/clutch, stainless steel cable Discharge Opening: Extra wide.",.7 " discharge opening with hinged chute Caster Wheels: x 3. smooth tread flotation, inner tubes, split rims, roller bearings, with quick pin removal Spindles: Cast housing, taper roller bearing, low maintenance with top access grease fitting and grease overfill relief poppet Pulleys: Cast-iron with easily removed taper hubs Cutter Deck Belts: B-section with Kevlar cord ADDITIONAL SPECIFICATIONS Seat: Foam padded, lever adjustment forward and back, with padded arm rests OPTIONAL ITEMS/ATTACHMENTS Grass Catcher: GCV/HD-/ Vacuum Grass Catcher with HP engine, gallon capacity, hard plastic cover, mounts on rear bumper Mulching Kit: Steel plate fits over discharge opening. No blade change or removal required. Installs and removes in the field. Electric Deck Lift: Lift mounts to the side of the rider frame assembly to raise and lower the deck at the flip of a switch. Fits on machines starting with the model year. APPROIMATE DIMENSIONS SM1 SM1A SM72 Length: 0.0" 3.0".0" Length with Grass Catcher:.0" 7.0".0" Tracking Width: 0.0" 0.0" 0.0" Width: 70.0" 70.0" 1.0" Width (with discharge chute up): 3.0" 3.0" 7.0" Width with GCV grass catcher: 70.0" 70.0".0" Height: 3.0" 3.0" 3.0" Height with GCV grass catcher: 1." 1." 1." Weight: 0 lbs. 0 lbs. 00 lbs. Weight with GCV grass catcher: 0 lbs. 0 lbs. 00 lbs. Date of Issue: June 1, Specifications Subject To Change Without Notice 23