TERMS and CONDITIONS

Transcription

1 TERMS and CONDITIONS Hour of operation ( mountain standard time ) 8.00 AM to PM PM to 4.30 PM Monday to Friday Terms of Payment Net 30 days from date of invoice - The seller reserves the right to with hold orders on outstanding accounts - Minimum invoice charge is $35.00 per single order - Quotes are valid for 15 days - Return of Goods - Seller reserves the right to refuse any product return s. A 20% service handling charge will apply to over stock return items. The seller requires an RGA ( return of goods authorization ) for ALL goods returned as well as a copy of the invoice or packing slip. Limited Warranty - All goods are limited to manufacturers warranty All special order products require a written purchase order - Cancellations - All special order products are NON RETURNABLE for any reason Packing and shipping terms - All orders are FOB Seller s warehouse ( Edmonton, Alberta) All discrepancies must be reported with 48 hours of reception of goods All order are shipped collect unless arrangements are with seller Courier cut off 2.00 PM daily Transport cut off 1.00 PM daily All add on order s are subject to a handling fee

2 High performance Manus - Bond 75 AM 75 - AM exhibits excellent adhesion to many substrates including aluminum, steel, granite, marble, wood and many plastics. Cures fast, even at low temperatures. This product is highly weather resistant and can be painted with most paints. Contains no solvents or isocyanates, is non - yellowing and does not shrink when applied. Authorized by the USDA Aluminum grey 10.3 oz tube White 10.3 oz tube Black 10.3 oz tube 73-A 100 % SILICONE Rubber Adhesive/ Sealant Especially designed for bonding and sealing a wide variety of structural material such as glass, steel, aluminum and plastic has exceptional resistance to weathering and temperature extremes Aluminum 10.3 oz tube Black 10.3 oz tube Clear 10.3 oz tube White 10.3 oz tube Page 01-01

3 Self adhesive ANTI-SLIP tape Black x 60 foot roll Black / Yellow x 60 foot roll x 60 foot x 60 foot roll x 60 foot x 60 foot roll x 60 foot roll High Speed Steel Jobber Length Drill Bits Size Part # Working Length Over All Length 7/ /4 2 5/8 1/ /8 2 3/4 9/ /4 2 7/8 5/ /8 11/ /8 3 1/4 3/ /16 3 1/2 13/ /16 3 5/8 7/ /2 3 3/4 1/ /4 4 17/ /8 4 1/8 9/ /16 4 1/4 5/ /16 4 1/2 3/ /8 5 7/ /16 5 1/2 1/ / degree split point starts on contact in all types of metal, no walking or skating Titanium nitride coating lasts up to six times longer than standard high speed steel Titanium decreases friction between bit and work piece, extending the bit life Ideal for production work or repetitive drilling For drilling in steel, cast steel, malleable iron, sintered metal, non-ferrous metal and plastic Page 01-02

4 Robertson driver dits #1 Robertson 1 15/16 long # 2 Robertson 1-15/16 long # 3 Robertson 1 15/16 long Magnetic driver bit holder /4 x 7/16 x 65 mm nut setter /16 x 1/2 x 65 mm nut setter /8 x 9/16 x 65 mm nut setter C clamp Clamp cast iron steel Clamp cast iron steel Page 02-01

5 Kompetitor metal depressed center general purpose grinding wheel - Applications : Structural steel, pipe, rebar, welds, ferrous metals /2 x.045 x 7/8 Type /2 x 1/8 x 7/8 Type /2 x 1/4 x 7/8 Type x.045 x 7/8 Type x 1/4 x 7/8 Type x.060 x 7/8 Type x 1/4 x 7/8 Type x.060 x 7/8 Type x 1/8 x 7/8 Type 27 METALCUT CUT-OFF wheels for metal and stainless steel Applications: Structural steel, sheet metal, ferrous metal, pipe, rebar Stainless steel /2 x.045 x 7/8-13,200 RPM x.045 x 7/8-12,200 RPM x.045 x 7/8-10,000 RPM x.045 x 7/8-8,600 RPM ALUCUT Aluminum fast cutting and clog resistant CUT-OFF wheels Applications: Aluminum, soft bronze, Brass, Non-ferrous metals x.045 x 7/8-13,200 RPM x.045 x 7/8-12,200 RPM x 060 x 7/8-10, 000 RPM x 060 x 7/8-8,600 RPM Page 05-01

6 General purpose fast cutting CUT-OFF wheels for portable chop-saws x 3/32 x 1 PREMIUM cut off wheel x 3/32 x 1 PREMIUM cut off wheel x 1/8 x 1 PREMIUM cut off wheel Zirconium Type 29 fiberglass backing POLY FLAP discs /2 x 7/8 40 grit /2 x 7/8 60 grit /2 x 7/8 80 grit /2 x 7/8 120 grit x 7/8 40 grit x 7/8 60 grit x 7/8 80 grit x 7/8 120 grit x 7/8 24 grit x 7/8 40 grit x 7/8 60 grit x 7/8 80 grit x 7/8 120 grit Sanding discs with VELCRO backing - Aluminum oxide paper Applications: Non-ferrous and ferrous materials, wood, metal, plastic, paint, varnish and fiberglass x 40 grit x 60 grit x 80 grit x 120 grit x 220 grit x 5/ dual action Velcro backing pad Page 05-02

7 Continuous Hinge Part # Open Width Length Material Thick Pin Size ( type) Knuckle Length Steel continuous hinge with brass pin brass brass brass brass brass brass brass 2 Steel continuous hinge with steel pin steel steel steel 1 Stainless Steel continuous hinge with SS pin SS SS SS SS SS SS SS 1 Aluminum continuous hinge with Aluminum pin Alum Alum Alum.5 Other sizes available upon request Page 09-01

8 Steel Weld-on Hinge with Brass Pin and Washer and Grease fitting Part # Length (mm) Inch Pin size (mm) / / / / / /4 Steel Weld-on hinge Brass Pin and Washer Part # Length (mm) Inch Pin size (mm) / / / / / / Page 11-01

9 304 Stainless Steel with SS Pin and Washer Part # Length (mm) Length inch Pin Size / / /4 11 Aluminum with Grease Fitting Part # Length (mm) Length inch Pin size / / / / leaf Steel Weld-on hinge - Steel Pin Part # Length (mm) Length inch pin size Page 11-02

10 Electrical cabinet door hinge, zinc plated 3-1/2 long x 2 wide Stainless steel bolt hinge with mounting studs 3 piece 2 long x 3/4 wide Stainless Steel hinge 2 long x 2 wide Stainless Steel hinge 2-3/8 long x 1-1/2 wide Stainless steel hinge 2-7/8 long x 1-1/2 wide Zinc plated hinge 2-5/16 long x 2-5/16 wide Stainless Steel hinge 2-5/16 long x 2-5/16 wide Stainless Steel hinge with square holes Overall length 4-1/8 - Strap 3-1/8 - Butt Stainless Steel hinge with round holes Overall length 4-1/8 - Strap 3-1/8 - Butt Stainless Steel hinge with square holes Overall length 6-1/8 - Strap 5-5/8 - Butt 1-1/ Stainless Steel hinge with round holes Overall length 6-1/8 - Strap 5-5/8 - Butt 1-1/2 Page 11-03

11 Stainless Steel hinge with square holes Overall length 5 - Strap 3-1/2 - Butt 1-1/ Neoprene gasket for hinge Stainless Steel hinge with square holes Overall length 6-1/2 - Strap 5-1/8 - Butt 1-3/ Weldon type flag hinge - plain steel 3 long strap - 2-1/2 high 1/2 pin Weld on type flag hinge - plain steel 4 long x 4 wide 3/8 pin Weld on type flag hinge - plain steel 4 long - x 4 long 1/2 pin Weld on type flag hinge - plain steel with grease fitting 4 long x 4 wide 1/2 pin Stainless steel service body hinge 4 overall length - with hole over the extrusion Stainless Steel service body hinge 4 overall length - as per picture Rubber gasket Stainless Steel service body hinge NEW Style 4 overall length Neoprene gasket strap ( ) Neoprene gasket for butt ( ) - Page 11-04

12 Long x 1.5 wide Stainless steel service body hinge 3/16 offset Zinc plated steel hinge 6-5/8 overall length - 5-1/8 strap - 1-3/4 butt Steel hinge with grease fitting 5-1/2 overall length - 3-3/4 strap - 1-3/4 butt Aluminum hinge with grease fitting 6 overall length - 3-7/8 strap - 2-1/8 butt Zinc T hinge with mounting holes Zinc T hinge with mounting holes Zinc T hinge with mounting holes Zinc T hinge with mounting holes Zinc strap hinge with mounting holes Zinc strap hinge with mounting holes Zinc strap hinge with mounting holes Spring loaded hinges long x 1.79 wide Carbon steel light duty spring Carbon steel heavy duty spring Page 11-05

13 Chrome zinc die cast hinge - non handed 5-7/16 overall length Black zinc die cast hinge - non handed 5-7/16 overall length Stainless steel die cast hinge - non handed 5-7/16 overall length Marine grade SS Aluminum butt hinge with loose pin no holes 5 long x 5 wide Plain steel hinge with grease fitting 3-3/4 long Stainless steel hinge 4.95 Overall length Stainless steel hinge 6.45 Overall length Stainless steel hinge 5-3/8 Overall length Stainless steel hinge 5-3/4 Overall length Stainless steel hinge 5-1/4 overall length Page 11-06

14 Stainless steel hinge with grease fitting 5-5/8 Overall length Stainless steel hinge 7 Overall length - 5-1/2 strap - 1-1/2 butt Stainless steel hinge 10-1/8 Overall length - 8 Strap - 2-1/8 Butt Stainless steel hinge - 1/4 offset 10-1/8 Overall length - 8 Strap - 2-1/8 Butt Zinc plated hinge with standard butt 9-3/4 Overall length - 8 Strap - 1-3/4 Butt Zinc plated hinge with reverse butt 8-3/8 Overall length - 8 Strap - Butt folds under strap Zinc plated hinge with standard butt 13-3/4 Overall length - 12 Strap - 1-3/4 Butt Zinc plated hinge with reverse butt 11-3/8 Overall length - 11 Strap - Butt folds under strap HD Zinc plated hinge with square butt 21-3/8 Overall length - 16 strap - 5-3/8 Butt - Page 11-07

15 L A D " 3.5" 5/8" Grade 5 (C-1045 Steel) " 3.5" 5/8" Grade 5 (C-1045 Steel) " 3.5" 5/8" Grade 5 (C-1045 Steel) " 3.5" 5/8" Grade 5 (C-1045 Steel) " 3.5" 5/8" Grade 5 (C-1045 Steel) " 3.5" 5/8" Grade 5 (C-1045 Steel) " 3.5" 5/8" Grade 5 (C-1045 Steel) " 3.5" 5/8" Grade 5 (C-1045 Steel) Steel tie bar for 3.5" Grade 5 (C-1045 Steel) " 4" 5/8" NF thread " 4" 5/8" NF thread " 4" 5/8" NF thread " 4" 5/8" NF thread Steel Tie bar for 4" Grade 8 NF thread " 5/8" Threaded rod " 5/8" Threaded rod Other sizes available upon request Page 30-01

16 Steel tool boxes - powder coated black - 14 gauge - folding T handle Wide x 18 High x 18 Deep - one lock Wide x 18 High x 18 Deep - one lock Wide x 12 High x 15 Deep - one lock Wide x 18 High x 18 Deep - one lock Wide x 18 High x 18 Deep - two locks - Powder coated black tool box with Stainless steel doors 14 gauge - folding T handle Wide x 18 High x 18 Deep - one lock Wide x 18 High x 18 Deep - one lock Wide x 18 High x 18 Deep - one lock - Page 31-01

17 Aluminum Checker Plate Tool Box thickness Wide x 18 High x 18 Deep - with folding T handle Wide x 18 High x 18 Deep - with folding T handle Wide x 18 High x 18 Deep - with folding T handle Wide x 18 High x 18 Deep - with aluminum bar lock Wide x 18 High x 18 Deep - with folding T handle Other sizes available upon request - lead time 2-3 weeks Steel Tool ( Job) Box Wide x 26 High x 24 Deep - pad lockable - Gun shot GREY in color Page 31-02

18 Conduit carrier kits Plastic conduit carrier kit - less tube Cast Aluminum conduit carrier - less tube Cast Aluminum conduit carrier - less tube Anti Sail Mud flap folders Zinc plated Anti sail mud flap bracket for 24 flaps Chrome Anti sail mud flap bracket for 24 flaps Page 31-03

19 13 x 1/2 diameter round grab handle Aluminum 4 mounting holes Zinc 4 mounting holes Chrome 4 mounting holes Stainless steel 4 mounting holes Zinc 2 mounting holes Chrome 2 mounting holes 13 x 1/2 diameter flat grab handle Chrome 4 mounting holes Stainless steel 4 mounting holes Stainless Steel hollow grab handle /2 long - 4 mounting holes long - 4 mounting holes Grab handles zinc grab handle with screws zinc die cast chrome handle zinc chrome grab handle ( hollow) Gasket for / Page 33-01

20 Plastic handle L x 8 CC plastic grab handle Rubber grip handle L Rubber grab handle L Rubber grab handle L Rubber grab handle L Rubber grab handle Anti Slip Grab Rail Anti slip grab rail - 2 foot Anti slip grab rail 4 foot Anti slip grab rail 6 foot Anti slip grab rail 10 foot Chrome Stanchions Chrome end stanchion Chrome center stanchion Gasket for stanchions Page 33-02

21 formed steel handle zinc Stainless steel Gate snap hook Aluminum tie off Zinc tie off Folding grab handles Zinc plated 4 base Stainless steel 4 base Folding steps Zinc 6.5 base Chrome complete with gasket 6.75 wide base x long Page 33-03

22 Pad lockable handle /16 shaft zinc finish Also available in chrome finish ( minimum qty) Pad lockable handle /8 shaft zinc finish Also available in chrome finish ( minimum qty) Pad lockable handle /16 shaft zinc finish /16 shaft Stainless Steel finish Page 33-04

23 Folding T handle with 5/16 shaft only Zinc plated key locking ( Eberhard type) ( with pin type cylinder) Stainless steel key locking ( Eberhard type) ( with pin type cylinder) Please note this is a two part lock system folding T handle rod set sold separately Zinc center case only RH zinc center case only LH zinc center case only zinc rods only Zinc rod guides only Three point zinc lock set only- does not include handle RH 3 point lock set shown below LH 3 point lock set Page 33-05

24 Cab lock 2 W x 3 3/8 H ( 58 ) LH shown RH zinc cab lock LH zinc cab lock Cab lock 2 W x 3 3/8 H ( 55) LH shown RH zinc cab lock with handle LH zinc cab lock with handle Cab lock 2 3/8 W x 4 11/32 H ( 55A) RH zinc cab lock with handle LH zinc cab lock with handle Heavy duty universal cab Plain steel Page 33-06

25 Single point adjustable T handle locks Right hand zinc plated non-locking Left hand zinc plated non - locking Right hand stainless steel with dust cap and 4 mounting holes Left hand stainless steel with dust cap and 4 mounting holes Right handle zinc plated with dust cap and 4 mounting holes Right hand stainless steel with offset cam, dust cap and 4 Mounting hole Right hand stainless steel with dust cap and 4 mounting studs /8 foam mounting gasket Replacement chrome T handle only Replacement keys only please specify number -CH 501 to CH 510 Page 33-07

26 Replacement cylinder for folding T handles CH key series Key number CH Key number CH Key number CH Key number CH Key number CH Key number CH Key number CH Key number CH Key number CH Key number CH Key number CH545 External Dust Cover for T handle locks Chrome dust cap Rubber dust cap Page 33-08

27 Eberhard Style 3 Point Stainless steel folding T handles point complete zinc plated point SS center case only point complete SS point complete SS Eberhard Zinc rod guides only bolt on Zinc rod guide only weld on zinc rod only SS locking D ring handles locking SS with 5/16 shaft locking SS- 2 point Gasket for 5-74 lock locking SS with 5/16 shaft locking SS 2 point Gasket for 7.13 lock point zinc cam right hand point zinc cam left hand Press on washer Page 33-09

28 Chrome compression 3 point latch - can be locked with a key and padlock or both Wide x 5.55 high Chrome base with chrome T handle 3 point cam - key locking with roller compression center point. Blind mount Eberhard chrome base with chrome T handle 3 point cam - key locking with roller compression Center point. Blind mount Black powder coat with chrome T handle 3 point cam - key locking with roller compression center point. Blind mount Replacement cylinders Keyed J Keyed J Keyed J203 Rods and rod guides sold separately Page 33-10

29 D Square D ring handles 6 wide x 7 high Stainless Steel non - locking Stainless steel Key locking /4 zinc bent rod for tool box lock /16 zinc bent rod with 1/4 hole used with folding handle locks. 34 long /16 zinc rod x 34 long /16 zinc rod x 48 long /8 zinc rod x 48 long /8 zinc rod x 36 long with oblong hole Zinc weld on rod guide Zinc bolt on rod guide Zinc plated anti-rattle rod guide Page 33-11

30 Rotary latches 1.13 Wide x 2.50 High RH zinc plated LH zinc plated - shown Zinc striker Other models available - minimum required 3 5/8 wide x 2 1/16 high 2 point rotary lock LH zinc plated RH zinc plated Zinc striker for rotary lock Other models available - minimum required Paddle handles for rotary latch SS remote control paddle handle - non locking SS remote control paddle handle key locking Page 33-12

31 Zinc spring bolt with 1/4 hole Zinc spring bolt with 3/8 hole Zinc hook point zinc plated large paddle handle less cylinder point SS large paddle handle less cylinder Cylinder for 2 point locks - keyed CH Sliding door lock - non locking plain steel Sliding door lock with inside handle Page 33-13

32 Refrigeration locks Chrome key locking 11 long x 3 wide complete with striker Striker only for lock Chrome key locking 11 3/4 long x 3 1/4 wide, complete with striker Striker only for lock Inside handle with 6 fiberglass rod Chrome non - locking cabinet latch 3/8 offset striker Chrome non - locking cabinet latch lbs door check long zinc #5-EZ door check- 11 SS arm - 15 lbs spring arm /64 base SS door check - 15 lbs spring Page 33-14

33 Door hold back zinc complete zinc complete with spring keeper SS complete zinc complete SS complete zinc complete SS complete Receptacle only with spring Zinc receptacle only SS receptacle only SS complete mounting gaskets Aluminum door hold backs Aluminum complete Aluminum complete The most positive holdback on the market Zinc die cast Chrome plated aluminum door hold back Chrome plated complete Chrome plated complete Direct replacement for rescue and fire truck units Page 33-15

34 TIE DOWN RINGS lbs ( 2pc) flush mount lbs D ring only Plastic spacer only lbs zinc recessed tie down lbs zinc recessed tie down 3-3/4 W x 4 L with anti rattle washer lbs zinc recessed tie down 3-3/4 W x 4 L Without anti rattle washer lbs zinc recessed tie down lbs zinc recessed tie down 4-3/8 ID - 6-1/4 OD Also available in Stainless steel min order Page 33-16

35 /4 L x 1-7/8 W zinc plated Zinc plated tie down SS tie down Aluminum tie off ( 2 pc) Zinc weld on tie down /2 D ring weld on plain steel /2 D ring bolt on plain steel /8 D ring weld on- 18,000 lbs capacity /4 D ring weld on 26,500 lbs capacity D ring weld-on 46,760 lbs capacity D ring weld -on - 46,8000 lbs capacity 3 wide x 4 long ring Page 33-17

36 Stainless steel fuel pocket does not work with aluminum filler necks Plastic gas cap / 10 lbs pressure for filler necks listed below Aluminum filler necks Long x 1 1/2 ID x 1 7/8 OD Long x 1 1/2 ID x 1 7/8 OD Heavy duty single seat iron Double arm seat iron Page 33-18

37 TOOL BOX LOCKS SS non-locking tool box lock SS key locking tool box lock SS key locking tool box lock with double hook Rod connector /4 rod Mounting gasket for tool box locks SS 3 stage tool box lock key locking Replacement cylinder - key EC Replacement cylinder - key EC Striker for tool box lock Page 33-19

38 Mini paddle handle 2.25 W x 2 H Zinc non-locking SS non-locking Also available in locking minimum qty required Trigger latches Chrome plated non-locking Chrome plated key locking Pivoting compartment latch Black finish - non locking Black finish - key locking 5.50 x 4.25 Large rotary paddle handle Stainless Steel key-locking Zinc plated striker for rotary paddle Page 33-20

39 5.50 x 4.25 Large paddle handle with 4 mounting holes Zinc plated non-locking Stainless steel non-locking Zinc plated key locking Stainless steel key locking Rubber gasket Inside release knob Replacement cylinder for Large paddle handle CH CH CH CH CH /4 long cam Replacement cylinder for large paddle handle with bent cam CH501 Replacement cylinder with slide bar and nut CH501 Zinc striker for paddle handle locks Zinc plated Page 33-21

40 3.25 x 3.25 Mini paddle handles with 4 mounting holes Stainless steel non-locking Stainless steel key locking 4.75 x Junior paddle handle with 4 mounting holes Zinc plated non-locking Stainless steel non-locking Zinc plated key locking Stainless steel key locking Rubber gasket Inside release knob Replacement cylinder for Junior paddle handles and tool box locks CH CH CH CH CH CH CH CH CH CH CH545 1 long cam Page 33-22

41 Eberhard 1969 bar lock Complete kit less pipe (1969-1) Zinc keeper (1969-2X) Zinc cam (1969-8) Zinc bearing cover (1969-9X) Zinc back plate ( ) Zinc pipe strap ( ) Zinc back plate (1969-5) Zinc handle clip ( ) Bushing (1969-7X) Top retainer (1969-6X) Zinc handle (1969-4X) Bottom retainer ( ) Bolt ( ) Nut Key locking pad lockable hasp Page 33-23

42 Eberhard 7502 bar lock Replacement parts # Handle & grip # Handle retainer # Anti-rack zinc cam keeper # Zinc center keeper # Anti-rack zinc cam # Zinc top pipe retainer # Zinc bottom pipe retainer Complete kit less pipe # point zinc bar lock # point zinc bar lock Key locking pad lockable hasp Page 33-24

43 Complete lock less pipe Replacement parts # top keeper # bottom keeper # top cam # bottom cam # handle with grip # grip only # pad lockable hasp # top pipe retainer # bottom pipe retainer Key locking pad lockable hasp Page 33-25

44 Heavy duty bar lock less pipe Zinc Stainless Steel Aluminum Replacement parts ( zinc) top cam top cam keeper bottom cam bottom cam keeper handle only grip only hasp ( 2 pcs) top pipe retainer bottom pipe retainer Page 33-26

45 Roller bar lock kit less pipe LD zinc HD zinc Replacement parts (zinc) Light duty # roller hinge # handle & grip # grip only # hasp Heavy duty # roller hinge # handle only # grip only # hasp (2 pc) Page 33-27

46 Roll up door replacement rollers Steel roller with 2.5 long shaft Steel roller with 6 long shaft Econo Steel roller with 2.5 long shaft Econo Steel roller with 6 long shaft Nylon roller with 2.5 long shaft Nylon roller with 6 long shaft Steel roller with 2.5 long shaft Roll up door cables galvanized galvanized galvanized stainless steel stainless steel stainless steel Page 33-28

47 Roll up door hinges Whiting type end hinge Whiting type center hinge Todco type end hinge Todco type center hinge Step bolts for roll up door hinges /4 x /4 Zinc /4 x /2 Zinc Trailmoble type rear door hold back Plain steel Zinc rear door hold back loop zinc door hold back Aluminum placard holder Aluminum with 1 SS clip Aluminum with 2 SS clips Plastic insert Stainless steel clips for placard Page 33-29

48 Whiting style roll up rear door lock Rear door lock only Keeper only for Whiting type door lock Todco Style roll up rear door lock Complete rear door lock both pieces Catch box for roll up door locks Plain steel catch box only 12 long x 2 5/8 wide Aluminum document holder Tite seal type document holder Replacement rubber cap Page 33-30

49 Flettner 2000 The Flettner 2000 has earned its place as the definitive wind-powered rotary ventilator. Highly respected for its sheer dependability and toughness the Flettner 2000 provides a cost-effective solution to the problems of excess heat and condensation. It has been proven in a range of demanding applications ranging from cabins in the Antarctic to buses in the tropics. # Black Available also in white Flettner TCX2 The all-new Flettner TCX-2 is simply the world s most advanced wind powered ventilator. For any given wind speed the Flettner TCX-2 achieves air extraction rates that are nearly twice those of the Flettner 2000 (source MIRA) # Black Available also in white Page 33-31

50 Round louvered vent stamped 304 stainless SS A 4 B 3 1/4 C 3 5/ SS A 5 B 4 1/8 C 4 1/2 Round Butterfly vent stamped 304 stainless SS A-5 B ABS molded white thru vent 3 5/8 OD ABS molded black thru vent 3 5/8 OD Aluminum vent H x W H x W with adjustable handle Page 33-32

51 13 3/8 L x 7 3/4 W Aluminum vent Aluminum vent with gasket and trim ring Aluminum vent with knob handle ( trim ring and gasket are extra) Plastic trim ring Vent gasket 12 L x 6 3/4 W Aluminum vent Aluminum vent low profile with tube handle ( trim ring and gasket are extra) Page 33-33

52 nylon stem - 1 3/8 rubber socket Aluminum door plunger /8 long Aluminum /8 long Aluminum /8 long Aluminum /8 long Aluminum Aluminum socket with rubber insert Rotary cab lock and handle Cab lock with inside handle and striker LH Cab lock with inside handle and striker RH Push button handle - reinforced nylon 7 1/4 LH ILL Page 34-01

53 SEAT BELTS # point adjustable lap belt - push button release - 72 long ( ) ( Black ) # point adjustable lap belt - push button release long ( ) ( Black ) # point retractable lap belt - push button release - 68 long ( Black ) # point retractable lap belt - push button release long ( Black ) Meets FMVSS standards when installed with proper hardware Other sizes and styles available upon request Page 35-01

54 Aluminum Louvered Vents aluminum louver vent with screen aluminum louver vent with screen aluminum louver vent with screen aluminum louver vent with screen aluminum louver vent with screen aluminum louver vent with screen aluminum louver vent with screen Page 35-02

55 Weld-on webbing winch (1820) standard Weld-on webbing winch low profile (7820) low profile Sliding webbing winch (2820) standard Sliding webbing winch (3820SPC) standard Storable sliding winch (5820) storable Other styles and models available upon request 1/4 steel winch track 6 foot long Page 38-01

56 Winch bars Black Chrome Corner protectors Plastic 2-4 web Rope tie off 1 Ratchet strap ratchet strap with wire hook x 30 foot winch strap x 40 foot winch strap /4 x 2 nickel plated D ring Page 38-02

57 Trailer Balls (chrome) x 1 Shank /16 x 1 shank SAE II 3500 lbs couplers x x 3 A-Frame couplers x 5000 lbs /16 x lbs x 8000 lbs forged /16 x lbs forged Safety chain /4 x 27 Safety chain 5200 lbs cap 1 heat treated S-hook with safety latch zinc plated G30 proof Safety chain /16 x 35 long cap zinc plated G43 high test chain with 1 forged slip hook Page 38-03

58 Drop hitches ( black) drop - 3/4 rise /4 drop x 2 rise drop x 4 3/4 rise Adjustable swivel Tri ball mount 3 ball 13 vertical travel Chrome ball mount - 2 x 2 x 12 long solid shank with 3 chrome balls Page 38-04

59 5 Ton pintle hook Ton combination pintle hook ,000 MGTV 2 trailer ball MGTV - 2 5/16 trailer ball Pintle hook adaptor x 2 x 7 1/2 L 3 sets of holes Forged receiver collar x 12 long plain steel x 24 long plain steel Receiver hitch pin with clip /8 x 3 long receiver pin /8 x 4 long receiver pin /8 Chrome plated with 2 keys Page 38-05

60 2000 lbs A-frame jack Retracted 20 x 14 travel 5000 lbs A-frame jack Retracted 20 x 14 travel Bearing kit for 2000/5000 lbs jack 2000 lbs Weld on pipe mount swivel jack Retracted x 15 travel 5000 lbs Weld on pipe mount swivel jack Retracted x 15 travel /16 pin with chain Zinc jack foot high diameter male mating pipe 5000 lbs Drop leg 2 1/4 square tube jack retracted x 14 travel side wind 7000 lbs Drop leg 2-1/2 square tube jack x 15 travel side wind x 15 travel top wind Bearing kit for 7000 lbs jack Zinc jack foot high Page 38-06

61 12,000 lbs 4 Square Sidewind trailer jack HD direct weld-side wind - spring returnwith handle 4 square tube - retracted height 28.5 travel distance HD direct weld- Side wind less handle 4 square tube - retracted height travel distance Replacement handle only Replacement cap with screws only Replacement handle clip only 3500 lbs Capacity - Electric A-Frame jack For use with trailers with A-frame couplers 18 Travel height LED light for easy night time hook up Bubble level on top of jack for easy trailer leveling Set up for 12 volt battery Weight 20 lbs Black in color Page 38-07

62 Round Quick Pins /4 x 1-3/8 zinc plated /4 x 1-3/4 zinc plated /16 x 1-3/8 zinc plated /16 x 1-3/4 zinc plated /8 x 1-3/8 zinc plated Square Quick Pins /4 x 2-1/2 zinc plated /16 x 2-1/2 zinc plated /8 x 2-1/4 zinc plated /8 x 2-1/2 zinc plated Lynch Pins /16 x 1-9/16, Useable length, 1-1/4 zinc plated /4 x 1-9/16, Useable length, 1-1/4 zinc plated /16 x 1-9/16, Useable length, 1-1/4 zinc plated /8 x 1-3/4, Useable length, zinc plated /16 x 1-9/16, Useable length, 1-11/32 zinc plated /16 x 1-3/4, Useable length, 1-1/2 zinc plated Page 41-01

63 Snapper Pins Part # Wire size A B C /8" 4-1/2" 3-1/8" 1-1/16" /16" 5-3/8" 3-3/8" 1-1/2" /4" 7-3/4" 5-1/4" 1-3/4" /32" 2-5/8" 1-11/16" 5/8" /8" 3-7/8" 2-13/16" 13-16" /16" 5" 3" 1-1/2" /32" 5-3/8" 3-3/4" 1-1/8" Stainless steel snap links long /8 long /4 long long Page 41-02

64 Handles Locking L handles - 5/16 square shafts - Satin Chrome finish Key locking L handle 1-1/2 CC front mounting - non threaded shaft turns CW Threaded shaft handles available upon request - Minimum order required delivery 6-8 weeks Locking T handles Key locking Black T handle - 1-1/2 CC front mount Key locking Black T handle - 1-1/2 CC Front mount - sold per set (2) keyed alike One left hand one right hand Key locking Satin Chrome T handle 1-1/2 CC Front mount - turns CW Folding T handle with attached stamped steel escutcheon 5/16 shaft Chrome plated zinc die cast inside handle Chrome plated zinc die cast inside handle Page 44-01

65 Adjustable roller lock rod system 96 long With fixed cam - complete With roller cam - complete Center cam with roller Rod guides (2) Bolt (3) roll rods Page 44-02

66 CAMS /8 zinc plated steel cam /4 zinc plated steel cam Zinc die cast cam Three point cam and cover kit Zinc plated - 2-1/8 long Push on lock washer Black Page 44-03

67 3 point dead bolt lock rod kits Zinc plated center case only x 5/16 zinc rods x 5/16 zinc rods Zinc rod guide 3 point dead bolt lock rod kits Zinc plated center case only x 5/16 zinc rods x 5/16 zinc rods Zinc rod guide /16 L Stainless steel hasp with staple Page 44-04

68 Slotted or screw driver type cam lock Slotted cam lock with straight cam Knob type cam lock Knob handle cam lock with straight cam Knob handle cam lock with 3 cams Wing type cam lock Wing handle cam lock with straight cam Compression latches 2.32 W x.75 H - grip range Natural with protective film Polished chrome long over center latch zinc plated Flush mount compression latch - black powder coat W x L key locking complete with cam. Page 44-05

69 Adjustable over center latches L, zinc plated non locking L, SS non locking L, zinc plated, pad lockable L, SS, pad lockable zinc striker fork type for SS striker - fork type for zinc striker for SS striker for L, zinc pad lockable L, SS pad lockable Zinc striker for SS striker for zinc pad lockable zinc non lockable SS pad lockable Zinc striker for SS striker for 6.4 length is overall fully extended over center latch - zinc plated Heavy duty over center latch - zinc plated Extra Heavy duty spring loaded Extra heavy duty over center latch Page 44-06

70 Zinc plated draw latch Zinc plated striker Stainless steel draw latch Stainless steel striker Zinc plated draw latch Zinc plated striker Zinc plated draw latch Spring loaded Zinc plated draw latch Zinc plated striker Spring loaded twist latch zinc plated Page 44-07

71 Zinc plated no holes Zinc plated 4 mounting holes Zinc plated 5 L x 2 W Zinc plated 5 1/8 L x 2 W - 1 travel Zinc plated 6.30 L x 1 9/16 W - 1 travel SS 6.30 L x 1 9/16 W - 1 travel Zinc plated 6 5/8 L x 1 9/16 W - 1 3/4 travel Aluminum 6 5/8 L x W - 1 3/4 travel SS 6 5/8 L x 1 9/16 W - 1 3/4 travel Replacement red knob Zinc plated 6.30 L x W - 1 travel 4 handle Zinc plated 8.58 L x 1-1/2 W - 3 travel L= over all length W= base width Page 44-08

72 Rubber hood fasteners zinc plated hardware SS hardware zinc plated hardware SS hardware zinc plated hardware SS hardware zinc plated hardware zinc plated hardware Spring loaded catches complete with striker /2 L - 90 degree mount /32 L - straight mount Zinc snap latch 3-3/4 long zinc plated Zinc striker Zinc pad lockable snap latch 3-1/4 long Page 44-09

73 Zinc plated over center latch - complete Zinc plated over center latch 3-1/4 long - pad lockable Zinc striker Black over center latch complete 2 pc long with 2 holes zinc J hook long with 2 holes zinc J hook long with 2 holes zinc J hook LH zinc plated - spring loaded bolt RH zinc plated - spring loaded bolt 2.75 Right hand Zinc plated footman loop A= 2.62 B= 3.19 Page 44-10

74 3-1/2 Chest handle Zinc plated Spring loaded chest handle Steel - yellow zinc plated Recessed spring loaded chest handle with rubber grip W x 4.25 H zinc plated Recessed spring loaded chest handle with rubber grip W x 5 H zinc plated Page 44-11

75 Zinc barrel bolt HEAVY DUTY Zinc barrel HEAVY DUTY zinc barrel bolt Base 4.5 long by 2 5/8 wide 1/2 pin - 2 staples Square mounting holes Page 44-12

76 100 LBS Full Extension Drawer slides With disconnect feature LBS Full Extension Drawer slides With disconnect feature All drawer slides sold in pairs 250 LBS Full Extension Drawer slides With disconnect feature Page 44-13

77 300 / 500 Lbs Full Extension Drawer slides lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap 300/ 500 Lbs Full Extension Drawer slides LOCK IN - LOCK OUT lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap lbs cap All drawer slides sold in pairs Page 44-14

78 Vertical Type Toggle Clamp zinc plated 85 mm high x 25.4 mm base Holding capacity lbs Handle swing 56 degree Vertical Type Toggle Clamp zinc plated 93.5 mm high x 29 mm base Holding capacity lbs Handle swing 65 degree Horizontal Type toggle Clamp zinc plated 79 mm over all length x 24 mm base Handle swing 80 degree Latch type Toggle Clamp zinc plated 130 mm long x 40 mm base - plus striker Holding capacity lbs Vertical Type Toggle Clamp zinc plated 210 mm high x 48 mm base Hold capacity lbs Handle swing 57 degree Page 45-01

79 LED Work lamp - LED power 18 W - Operating Voltage V DC - Waterproof rate IP67 6 diode 3 W high intensity LED s - Current draw 12 V 24 V Black diecast aluminum housing - SS mounting brackets Size 128 mm x 116 mm x 43 mm LED Work lamp - LED power 30 W Operating Voltage 10-30V DC Waterproof rate IP67 30 diode 1W high intensity LED s - Current draw 12V - V Black diecast aluminum housing - SS mounting brackets Water proof - Explosion proof - Shock Proof LED Wide pattern Work lamp - LED power 24W - Operating Voltage 10-30V DC - Waterproof rate IP67-8 diode 3W high intensity LED s Current draw 12V 24V Black diecast aluminum housing LED wide pattern Work lamp - LED Power 24W - operating Voltage 10-30V DC - Waterproof rate IP67-8 diode 3W high intensity LED s Current draw 12V 24V Black diecast aluminum housing Page 54-01

80 /8 x 2-5/8 LED work light - LED power 10 W - Operating Voltage V DC - Waterproof rate IP W HIGH INTENSITY CREE LED BULB - Current draw volt - Black aluminum housing - SS mounting brackets /8 x 2-5/8 LED work light - LED power 10 W - Operating Voltage V DC - Waterproof rate IP 67-4 X 3W HIGH INTENSITY Epistar LED BULB - Current draw volt - Black aluminum housing - SS mounting brackets /2 H x 4-1/4 W LED work light - LED power 20 W - Operating voltage V DC Waterproof rate IP 67-2 x 10 W HIGH INTENSITY CREE LED BULBS - Current draw 12 V 24 V LED work lamp - LED power 36 W Operating Voltage DC - Waterproof rate IP67-12 x 3 W HIGH INTENSITY LED BULB - Die cast aluminum body LED work lamp - LED Power 72 W Operating voltage DC - Waterproof rate IP x 3W LED HIGH INTENSITY BULB - Die cast aluminum body Page 54-02

81 RED LED marker light 3 diodes AMBER LED marker light 3 diodes RED LED marker light 9 diodes AMBER LED marker light 9 diodes wire plug rubber grommet RED LED marker light 4 diodes AMBER LED marker light 4 diodes RED LED marker light 13 diodes AMBER LED mark light 13 diodes wire plug flush rubber grommet raised rubber grommet closed back rubber grommet 1 1/8 wide x 2 1/2 long LED marker light RED LED marker light 6 diodes AMBER LED marker light 6 diodes Chrome base 1 1/8 wide x 4 4/5 long LED marker light RED LED marker light 4 diodes AMBER LED marker light 4 diodes RED LED marker light 12 diodes AMBER LED marker light 12 diodes AMBER /RED LED fender marker light Chrome base Grey base Black base Page 55-01

82 dome light less switch dome light with switch recessed dome light less switch /16 x 4 9/16 dome light less switch /16 x 4 9/16 dome light with switch x Oval low profile dome or cabinet lamp with 3 amp toggle switch and polycarbonate shallow lens x Oval low profile dome or cabinet light with 3 amp toggle switch and polycarbonate shallow lens with switch LED LAMP Clear incandescent sealed beam lamp - horizontal and vertical rotation - gray in colour no switch LED version, 450 Lumens no switch 550 mamps at 12.6 volts Clear incandescent sealed beam lamp - horizontal and vertical rotation - gray in colour with switch LED version, 450 Lumens with switch 550 mamps at 12.6 volts replacement seal beam # 4466 Also available in black and white in colour Full 360 degree rotation Page 55-02

83 # LED Swivel lamp with on/off switch 18.5 long - 30 White diodes - Voltage 12/24V Current draw.37 A long x 1 3/8 wide x 1 3/8 high LED dome lamp with switch - 54 white diodes - Voltage 12/247V LED DOME LIGHT 2.95 round -.67 high 4 diodes - 12 volt AMP LED SPOT LIGHT 5 1/16 round - 12 / 24 volt - 6 diodes 1.2 amp Lumen Replacement visor LED SPOT LIGHT 3.5 high x 5.75 wide 12 / 24 volt -6 diodes 1.2 AMP Lumen Back up alarm 97 db - 12 to 24 volt stud connection nylon housing Back up alarm db - 12 to 24 volt stud connection - nylon housing Page 55-03

84 RED incandescent marker light AMBER incandescent marker light wire plug rubber grommet RED incandescent reflector marker light AMBER incandescent reflector marker light wire plug flush rubber grommet raised rubber grommet closed back rubber grommet 1 1/8 wide x 2 1/2 long incandescent marker light RED incandescent marker light AMBER incandescent marker light CLEAR incandescent marker light Chrome base 1 1/8 wide x 4 4/5 long incandescent marker light RED incandescent marker light AMBER incandescent marker light CLEAR incandescent marker light AMBER/RED incandescent fender marker light Chrome base Grey base Page 55-04

85 2 1/4 x 6-1/2 oval incandescent lamps RED incandescent lamp S/T/T AMBER incandescent lamp S/T Clear incandescent lamp AMBER mid-ship incandescent lamp Straight plug Angle plug Oval rubber grommet 4 round incandescent lamp RED incandescent reflective S/T/T lamp AMBER incandescent reflective S/T lamp CLEAR incandescent lamp Straight plug Angle plug rubber grommet 2 wide x 4 long marker light RED incandescent marker light AMBER incandescent marker light RED LED marker light 13 diodes AMBER LED marker light 13 diodes Chrome guard 3 in row incandescent bar light 1 x 2.75 light RED lamp Page 55-05

86 2 1/4 x 6 1/2 Oval LED lamps - new style plug RED LED S/T/T lamp 10 diodes AMBER LED - S/T/ lamp 10 diodes CLEAR LED - S/T/T with 10 RED diodes CLEAR LED - S/T/T with 10 AMBER diodes RED LED - S/T/T lamp 40 diodes AMBER LED - S/T/T lamp 40 diodes CLEAR LED lamp 28 diodes RED LED directional arrow only 25 diodes AMBER LED directional arrow only 25 diodes New style direct wire plug New style direct wire plug Adapter plug - old to new Oval rubber grommet 4 Round LED lamps - new style plug RED LED - S/T/T lamp 10 diodes RED LED - S/T/T lamp 40 diodes AMBER LED - S/T lamp 40 diodes CLEAR LED lamp 28 diodes CLEAR LED S/T/T lamp with 10 Red diodes CLEAR LED S/T/ lamp with 10 AMBER diodes rubber grommet 4 x 6 LED lamps RED LED - S/T/T lamp 52 diodes AMBER LED - S/T lamp 52 diodes x 6 rubber grommet Page 55-06

87 2 1/4 x 6 1/2 Oval LED lamps Old style plug RED LED S/T/T lamp 10 diodes AMBER LED S/T lamp 10 diodes AMBER LED mid ship lamp Old style straight plug Old style angle plug Oval rubber grommet 4 Round LED lamp Old style plug RED LED S/T/T lamp with 10 diodes AMBER LED S/T lamp with 10 diodes rubber grommet 2-1/4 Wide x 6 3/4 long LED marker lamps RED LED marker lamp 16 diodes AMBER LED marker lamp 16 diodes RED LED surface mount S/T/T lamp 10 diodes AMBER LED surface mount S/T lamp 10 diodes CLEAR LED surface mount lamp 10 diodes Chrome contour for surface mount lamps Reflectors /16 red adhesive back reflector /16 amber adhesive back reflector /8 x 4 5/16 red adhesive back reflector /8 x 4-5/16 amber adhesive back reflector Page 55-07

88 /2 wide x 1 1/4 high chrome license /4 wide x 1 1/2 high Chrome license light /16 wide x 2 1/8 high Chrome - stud mount /16 wide x 2 1/8 high Grey - stud mount /16 wide x 2 1/8 high Grey - front mount /16 wide x 2 1/8 high grey license light seal beam ( 4411) in rubber housing replacement seal beam (4411) seal beam halogen in rubber housing /8 x 6 work light in plastic housing 12 volt - H3-55 watt bulb x 7 driving light in rubber housing 12 volt - H3-55 watt bulb x 6 dual halogen lamp driving pattern x 6 dual halogen lamp trapezoid pattern x 6 dual halogen lamp work pattern 12 volt - H3-55 watt H-3 x 12 volt x 55 watt halogen bulb H-3 x 12 volt x 100 watt halogen bulb chrome off road multi reflection light chrome off road multi reflection light Page 55-08

89 chrome bezel chrome bezel with visor chrome bezel chrome bezel with visor Oval chrome bezel Oval chrome bezel with visor chrome bezel chrome bezel with visor terminal junction box terminal junction box ABS approved terminal junction box Brass circuit studs in a moisture corrosion box. Complete with chock seals and cable entrance fitting way plastic RV male plug way plastic RV female plug # /8 Metal chassis clamp # /2 Metal chassis clamp Conspicuity tape 3 year warranty x 150 ft roll - 7 white / 11 red conspicuity tape x 150 ft roll - 7 white / 11 red conspicuity tape Page 55-09

90 Nylon cable ties White Black # " X.10" - (18 lbs) # # " X.14" (40 lbs) # # " X.192" ( 50 lbs) # # " X.192" (50 lbs) # # " X.192" ( 50 lbs) # # " X.303" (120 lbs) # Automotive wire pig tails by the roll wire pig tail x 100 foot roll 8 long wire pig tail x 100 foot roll 10 long wire pig tail x 100 foot roll 12 long wire pig tail x 100 foot roll 14 long wire pig tail x 100 foot roll - 24 long wire pig tail x 100 foot roll 12 long Page 55-10

91 Dual wall heat shrink tube - adhesive lined flexible polyolefin Tubing - Shrink ratio 3:1 Operating temperature range 55 degree C degree C /8 x 48 long black /16 x 48 long black /4 x 48 long black /8 x 48 long black /2 x 48 long black /4 x 48 long black x 48 long black /4 x 48 long red x 48 long red Partially Cushioned Cable Clamp Diameter Width # /4" 1/2" # /8" 1/2" # /2" 1/2" # /8" 1/2" # /4" 1/2" # /8" 1/2" # " 1/2" # /4" 1/2" # /2" 1/2" # " 1/2" Page 55-11

92 Part # Thickness x Width /16 x 1/2-100 ft roll ft carton /16 x ft roll ft carton # /8 x 3/8-50 ft roll ft carton # /8 x 1/2-50 ft roll ft carton # /8 x 3/4-50 ft roll ft carton # /8 x 1-50 ft roll ft carton # /8 x 1-1/4-50 ft roll ft carton # /8 x 1-1/2-50 ft roll ft carton # /8 x 2-50 ft roll ft carton # /16 x 3/8-50 ft roll ft carton # /16 x 1/2-50 ft roll ft carton # /16 x 3/4-50 ft roll ft carton # /16 x 1-50 ft roll ft carton # /16 x 1-1/2-50 ft roll ft carton # /4 x 3/8-25 ft roll ft carton # /4 x 1/2-25 ft roll ft carton # /4 x 3/4-25 ft roll ft carton # /4 x 1-25 ft roll ft carton # /4 x 1-1/2-25 ft roll ft carton # /4 x 2-25 ft roll ft carton # /4 x 3-25 ft roll ft carton # /16 x 3/4-30 ft roll ft carton # /16 x 1-30 ft roll ft carton # /16 x 1-1/2-30 ft roll ft carton # /8 x 1/2-25 ft roll ft carton # /8 x 3/4-25 ft roll ft carton # /8 x 1-25 ft roll ft carton # /8 x 2-25 ft roll ft carton Also available is the same sponge neoprene with a more aggressive adhesive minimum quantities may apply. Please contact our office for more information OTHER SIZES AVAIL- ABLE UPON REQUEST # /2 x 1/2-25 ft roll ft carton # /2 x 5/8-25 ft roll ft carton # /2 x 3/4-25 ft roll ft carton # /2 x 1-25 ft roll ft carton # /2 x 1-1/2-25 ft roll ft carton # /2 x 2 25 ft roll ft carton # /4 x ft roll ft carton # /4 x 1-1/ ft roll ft carton Page 66-01

93 Clip on double lip edge trim small Sold by the meter ( black ) sold by the 50 meter roll ( black ) Sold by the meter ( white) Sold by the 50 meter roll ( white ) Clip on double lip edge trim - large Sold by the meter ( black ) Sold by the 50 meter roll ( black ) Clip on edge trim with EPDM bulb Sold by the meter ( black) Sold by the 50 meter roll ( black ) Clip on edge trim with EPDM bulb Sold by the meter ( black) Sold by the 50 meter roll ( black ) All cut products are NON RETURNABLE Page 66-02

94 Small edge trim with EPDM side bulb - grip range up to 11/ By the meter only meter rolls only Clip on edge trim with EPDM side bulb - 1/4 grip range - 3/8 ID - 1/2 OD bulb By the meter only meter roll only Clip on edge trim with EPDM side bulb - 1/4 grip range - 1/2 ID - 5/8 ID bulb By the meter only meter roll only All cut products are NON RETURNABLE 27 mm EPDM rubber side bulb edge trim - grip range up to 11/ By the foot only foot roll we do not cut this item 16 mm 13 mm Page 66-03

95 Clip on edge trim with EPDM side bulb - Grip range 1/4-1/2 ID - 5/8 OD bulb By the meter only meter roll only Clip on edge trim with EPDM side bulb - Grip range 1/4-1/2 ID - 5/8 OD bulb By the meter only meter roll only All cut products are NON RETURNABLE Sponge rubber seal with adhesive /8 wide x 7/32 high ( 50 foot rolls ) /8 wide x 3/8 high ( 50 foot rolls) /4 wide x 1/2 high ( 50 foot rolls ) wide high /8 Solid core rubber rope 150 foot roll Truck tail gate seal fits all trucks for rolls foot roll Page 66-04

96 Acoustical Foam Perforated black vinyl noise reduction Meets FMVSS 302 for flammability Foam density ATSM D Great insulation of interior of industrial and automotive cabs # /2 thick x 54 wide black # thick x 54 wide black Other colors available upon request - minimum required Rubber matting /8 x 36 fine ribbed rubber matting - 25 yard roll /8 x 48 fine ribbed rubber matting - 25 yard roll /8 x 36 standard ribbed rubber matting -25 yard roll /8 x 48 standard ribbed rubber matting - 25 yard roll x 36 x 1/2 thick interlocking matting Page 66-05

97 Part # Outside dia(a) Height (B) Recess depth ( C) Recess Width (D) Hole dia (E) /2 1/4 3/16 1/4 1/ /2 7/16 7/32 1/4 1/ /2 11/32 3/16 1/4 1/ /8 7/16 5/32 5/16 5/ /8 5/16 13/16 15/64 11/ /4 3/8 5/32 3/8 1/ /4 7/16 5/32 9/32 3/ /4 1/2 3/8 3/16 3/ /16 3/8 7/32 3/8 3/ /16 5/16 17/32 9/ /8 5/16 5/ /16 7/16 1/4 1/ /2 1/4 1/2 7/ /16 3/16 3/8 3/ /32 5/8 13/32 7/16 3/ /16 1/2 1/4 3/8 1/ / /2 1/ /2 5/8 11/32 1/2 3/ /4 27/32 25/32 3/ /2 1 1/2 1 1/8 3/8 Page 66-06

98 Part # No of holes Width Length Height Hole size Hole distance CC / /4 1/ /8 4-7/8 3-3/4 1/ /2 5-1/2 3-3/8 3/ / /8 1/2 2-1/ / /8 3-1/ /4 7-1/2 2 7/16 4-5/ /4 3-1/4 1/2 3-1/ /8 8-1/8 3-5/8 5/8 5-1/ / /8 1/2 6-1/ /4 6-1/8 3-3/8 1/2 2-1/2 M 4 Dock bumper A = 3-7/8 B = 4-1/2 # long with mounting holes # long no mounting holes # long no mounting holes Page 66-07

99 Rubber Wheel Chocks /8 long x 8 wide x 4 high rubber wheel chock long x 7.5 wide x 5.5 high rubber wheel chock long x 6.5 wide x 8 high rubber wheel chock long x 11-5/8 wide x 8 high HEAVY DUTY Rubber wheel chock with handle 1/4 Black rubber mud flaps W x 24 L mud flap W x 30 L mud flap W x 36 L mud flap Page 66-08

100 EPDM Rubber Tarp Straps max stretch max stretch max stretch max stretch max stretch /8 rubber fender 100 foot roll - sold by the foot /2 rubber fender 52 foot roll - sold by the foot /2 rubber fender 50 foot roll - sold by the foot Page 66-09

101 Gas Spring / shocks 12.5 Extended compressed - 8 mm rod - 20 mm tube L1 = 4.25 L2 = 12.5 L3 = lbs cap 10 mm plastic end fitting lbs cap 10 mm plastic end fitting lbs cap 10 mm plastic end fitting lbs cap 10 mm plastic end fitting 18 Extended compressed - 8 mm rod - 20 mm tube L1 = 7.5 L2 = 18 L3 = lbs cap 10 mm plastic end fitting lbs cap 10 mm plastic end fitting lbs cap 10 mm plastic end fitting lbs cap 10 mm plastic end fitting Other sizes available upon request - minimum order required Page 80-01

102 Gas Spring / shocks Extended - 13 compressed - 10 mm rod - 21 mm tube L1 = 8 L2 = L3 = lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket Extended - 17 Compressed - 10 mm rod - 21 mm tube L1 = 11 L2 = L3 = lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket lbs cap complete with 13 mm steel ball stud and steel socket Other sizes available upon request - minimum order required Page 80-02

103 Gas spring hardware mm ball stud mm ball stub mm screw on nylon replacement socket mm angle steel universal socket bracket mm flat steel universal socket bracket mm ball socket bracket right hand mm ball socket bracket left hand mm ball socket bracket right hand mm ball socket bracket left hand mm metal ball socket and ball stud mm metal ball socket and ball stud mm ball socket only Safety clip only for 13 mm ball stud Page 80-03