10 lighting. 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs

Size: px

Start display at page:

Download "10 lighting. 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs"

Elvin Curtis
5 years ago
Views:

1 10 lighting 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps 12 Bulbs JULY LIGHTING 1

RECHARGEABLE METAL LED LAMP Art. No. 827.

decreases to 10% in the "Power Light" mode Electric protection IP X6, according to IEC 60529

6 Dimensions 35mm x 150mm (lamp head in) 157mm (lamp head out) Weight 156g (without battery) Accessories Lithium ion battery 19670, car charger, mains charger, hand strap Rechargeable metal torch of

Features: With CREE P4 1-watt high performance LED One-hand sliding carriage focusing mechanism Lithium battery pack, 2200 MAH, 3.

2 RECHARGEABLE METAL LED LAMP Art. No Technical Information Item Description LED light LED CREE 1W Luminous level 135 lumen Battery Lithium ion Battery charge duration 4 hrs; afterwards, the luminance level decreases to 10% in the "Power Light" mode Electric protection IP X6, according to IEC 60529, Section Dimensions 35mm x 150mm (lamp head in) 157mm (lamp head out) Weight 156g (without battery) Accessories Lithium ion battery 19670, car charger, mains charger, hand strap Rechargeable metal torch of extremely light-weight aircraft aluminum with adjustable focusing options. Features: With CREE P4 1-watt high performance LED One-hand sliding carriage focusing mechanism Lithium battery pack, 2200 MAH, 3.7V Charging with 110 V power supply unit or V DC adaptor Microcontroller-controlled charging technology Charging time for fully drained battery is approx. 4 h Lighting duration of up to 12 h (lamp brightness does not begin to slowly decrease until after approx. 4 h) Protection against water and dust, IP X6 Overcharging protection Multifunction of light: High-light Low- light Flash SOS Dimension: 35mm 157mm Weight: about 200 g Delivery scope: 1 battery pack, 1 user manual 1 metal torch with 1-watt high-performance LED V DC vehicle adaptor and V charger 1 charging socket cover 1 pouch for metal torch Recommended tools: Replacement battery Art. No LED WORKLIGHT Art. No Features: Rechargeable LED work light. Bi-directional lighting: 5 LED "spotlight" area on end, 21 LED lights on face (cannot be on simultaneously). Adjustable 180 lamp head. Two retractable 360 swivelling suspension hooks. Three strong built-in magnets (Two on back, one on bottom allows easy positioning of the light to suit your work area) Convenient nylon hanging strap. Overcharge/discharge protection system: auto power off when battery runs low. Coloured LED indicates when battery is fully charged (red/green). Technical Data Operating time (main light) Up to 8 hours LED intensity (main light) 1000 Lux Operating time (spotlight) Up to 15 hours LED intensity (spotlight) 250 Lux Battery specifications 3.7 V/2100 mah Li-ion Power voltage V, 50/60 HZ Charging time 4 hours Dimensions (L) overall 25cm (9-3/4 ) Contents: Rechargeable LED Work Light, AC/ DC charger, User manual P. Qty: 1 2 NEW! WURTH.CA 2017

RECHARGEABLE LED PEN LIGHT Art. No. 827.500011 Technical data Light source 7 LEDs in front, 1 LED on bottom Li-ion battery 3.7V dc, 750 mah Light output 150 lux at 0.5 meters distance Charge time 3.

3 RECHARGEABLE LED PEN LIGHT Art. No Technical data Light source 7 LEDs in front, 1 LED on bottom Li-ion battery 3.7V dc, 750 mah Light output 150 lux at 0.5 meters distance Charge time 3.0 hours Discharge time 3.0 hours for constant light out-put Grade of protection IP 20 indoor use Lighting angle 160 Dimensions (L x D) 167.5mm x 23mm Features: High light out-put with pen size. Compact and one button operation. Li-ion battery, long time operation. Additional LED on bottom, torch function. Strong housing, for durable use. With clip and magnet, easy for positioning. Contents: Rechargeable LED Pen Light, A/C Adapter, Car charger, User manual P. Qty: 1 LED POCKET LIGHT Art. No Features: COB (circuit on board) LED lighting system Magnetic base for convenient positioning Batteries Included Pocket clip for easy access Durable plastic housing with weather resistant button Technical Data Light source Battery Light out-put Run time COB LED 3 AAA alkaline batteries (included) 150 lumens Up to 7 hours UV LED POCKET LIGHT Art. No Technical Data Light Source Battery Light Output Run Time 1.5W COB LED 100,000hr COB lifespan 3 AAA Alkaline batteries (included) nm UV Up to 24 hours UV LED Lamp for Leak Detection Features: COB (circuit on board) LED lighting system Magnetic base for convenient positioning Batteries Included Pocket clip for easy access Durable plastic ABS housing with weather resistant button Benefits: Works with all types of UV leak detection dyes Convenient pocket size Compact design easily gets into tight, cramped spaces EXTENDABLE U/V POCKET LIGHT Art. No High powered (395 nm peak, 400 nm dominate) true U/V LED. Rated for over 50,000 hours of use. Perfect for close-up inspections. Pocket sized, extendable (5.51 ~ 7.09 inches). Includes adjustable service mirror for those hard to see areas. P. Qty: 1 JULY LIGHTING 3

WORK LIGHT WITH 40' REEL Art. No. 828.826 Clear lens and bumper provides maximum light protection.

Light produces 900 lumens. UL and C-UL listed. Black reel case. Optional wall or ceiling mount. Recommended: Replacement items for Art. No. 828.

Qty: 1 Replacement Bulb Art. No. 720.3009 P. Qty: 1 WÜRTH ERGOLIGHT PRO Art. No. 827.

Adjustable angle Front high power LED spot light Double hooks for hanging convenience Strong belt clip for ease of use and mobility Wrist strap

5 meter 1300 lux Power Source/Mains line 3.7V, 2100 mah Illumination Angle 90 Charging time approx. 4.5 hrs Discharging time approx.

4 WORK LIGHT WITH 40' REEL Art. No Clear lens and bumper provides maximum light protection. On/off switch in handle protected from dirt and moisture. Outer tube and magnifying lens made of tough polycarbonate. 40' reel with 16 GA cord. Light produces 900 lumens. UL and C-UL listed. Black reel case. Optional wall or ceiling mount. Recommended: Replacement items for Art. No Retractable Safety Light Replacement Lens & Ballast Art. No P. Qty: 1 Replacement Lens Kit Art. No P. Qty: 1 Replacement Bulb Art. No P. Qty: 1 WÜRTH ERGOLIGHT PRO Art. No New Circuit On Board (COB) Technology Lighting Features: Exclusive Würth design 2 component housing with rubber grip Strong magnet base Adjustable angle Front high power LED spot light Double hooks for hanging convenience Strong belt clip for ease of use and mobility Wrist strap Technical Data Main light Luminous flux 350 lumens Light 0.5 meter 500 lux Spot light Light 0.5 meter 1300 lux Power Source/Mains line 3.7V, 2100 mah Illumination Angle 90 Charging time approx. 4.5 hrs Discharging time approx. 3 hrs Grade of protection IP65 Rechargeable battery Benefits: Extremely high output and intensity Very wide lighting angle Better visibility and coverage Torch function Longer-lasting rechargeable battery Convenient and easy to use Torch function Double hooks Strong magnet base Very wide lighting angle (pictured right) 4 NEW! WURTH.CA 2017

LED LAMPS Advantages of LED Technology Long service life, as maintenance-free No bulb change necessary Very low power consumption Hermetically sealed Resists road dirt, dust and moisture Solid state

Epoxy encapsulated circuit board Grommets: 812.420244 open back or 812.420245 closed back Pigtails: 812.420251 & 812.

5 LED LAMPS Advantages of LED Technology Long service life, as maintenance-free No bulb change necessary Very low power consumption Hermetically sealed Resists road dirt, dust and moisture Solid state circuit boards LEDs provide 100,000 hour lifetime rating Meets or exceeds DOT FMVSS 108 & MOT CMVSS108 Will fit Grote grommets Oval LED lamps Polycarbonate body and lens Zinc plated steel contacts Epoxy encapsulated circuit board Grommets: open back or closed back Pigtails: & right angle plug LED Colour Lens Colour # of Diodes Dimensions L x W x H Mounting Clearance Function Voltage Amp Draw SAE Art. No. Qty. Amber Amber Signal/ Park 30 ma ma I6P Red Red /2 x 2-1/4 x 1-1/8" Stop/ Turn/ Tail 20 ma ma S2T2I Clear Clear Back-up 18 ma R Amber Amber Turn/ Tail/ Park 10 ma ma IP Red Red /2 x 2 1/4 x 1" 1-7/8" Depth Stop/ Turn/ Tail/ Park 12 V 10 ma ma STIP Clear Clear Back-up 90 ma R Red /2 x 2-1/4 x 1-1/8 Stop/ Turn/ Tail 20 ma ma S2T2I Amber Clear 24 Turn/ Tail/ Park 10 ma ma IP /2 x 2 1/4 x 1" Red Stop/ Turn/ Tail/ Park 10 ma ma STIP LED LAMPS Round LED Lamps Polycarbonate body and lens Zinc plated steel contacts Epoxy coated circuit board Grommets: open back or closed back Pigtails: straight plug or right angle plug LED Colour Lens Colour # of Diodes Dimensions Mounting Clearance Function Voltage Amp Draw SAE Art. No Qty. Amber Amber Signal/ Park 36 ma/290 ma I6P Red Red /4" ø 7/8" H 1-7/8" Depth Stop/ Turn/ Tail 22 ma/147 ma S2T2I Clear Clear Back-up 0.29 R Amber Amber Signal/ Park 23 ma /400 ma IP /4" ø 12 V Red Red /8" Depth Stop/ Turn/ Tail 18 ma/272 ma STI " H 1 Clear Clear Back-up 0.23 AMP IP Red /4 x 7/8 H 1-7/8 Depth Stop/ Turn/ Tail 19 ma/ 201 ma S2T2I Clear Red /4" x 1" H 1-3/8" Depth Stop/ Turn/ Tail 18 ma/212 ma STI JULY LIGHTING 5

LED LAMPS WITH SILVER SURFACE MOUNT Advantages of LED Technology Long service life, as maintenance-free No bulb change necessary Very low power consumption Hermetically sealed Resists road dirt, dust

6 LED LAMPS WITH SILVER SURFACE MOUNT Advantages of LED Technology Long service life, as maintenance-free No bulb change necessary Very low power consumption Hermetically sealed Resists road dirt, dust and moisture Solid state circuit boards LEDs provide 100,000 hour lifetime rating Meets or exceeds DOT FMVSS 108 Will fit Grote grommets Oval LED lamps Polycarbonate body and lens Zinc plated steel contacts Epoxy encapsulated circuit board Surface mount installation eliminates the need to cut mounting hole and does not require grommets & pigtails. LED Colour # of Diodes Dimensions L x W x H Mounting Hole Size Mounting Centre Function Voltage Amp Draw SAE Art. No. Qty. Amber with Chrome Bezel /16" Signal/Park 26 ma / 217 ma 16P /16" x 3-5/16" x 7/8" 3/16" 12V 1 Red with Chrome Bezel 2-11/16" Stop/Turn/Tail 29 ma/ 119 ma S2T2I ROUND LED CLEARANCE MARKER LAMPS Polycarbonate body and lens Zinc plated steel contacts Epoxy encapsulated circuit board * Epoxy coated circuit board LED Colour # of Diodes Dimensions Function Voltage Amp Draw SAE Art. No. Qty. Amber 92.6 ma * 4 Red 90.7 ma * Amber 2" ø 90.7 ma Star Pattern Red 1" H 90.7 ma Amber with clear lens 90.7 ma Red with clear lens Clearance Marker 12 V 90.7 ma P Amber 87.3 ma * 4 Red 89.5 ma * 2-1/2" ø Amber ma Star Pattern 1" H Red ma Red with clear lens ma SEALED LAMPS WITH DECORATIVE CHROME BEZELS LED lamps with chrome on ABS bezels and 2 wires Surface mount installation without grommet & pigtails Hard wired contacts Polycarbonate lens and body Epoxy coated circuit board LED Colour # of Diodes Dimensions L x W x H Mounting Function Voltage Amp Draw SAE Art. No. Qty. Amber Clearance 89.6 ma /8 x 2-1/8 x 7/8" 4" centre 12 V P2 1 Red marker 88.5 ma NEW! WURTH.CA 2017

LED CLEARANCE MARKER LAMPS - REFLECTIVE Contacts: Zinc plated steel Epoxy encapsulated circuit board Polycarbonate lens & body Colour # of

420252 4 Clearance marker/ reflector 12 V AP2 1 Red 3/4" depth 63.2 ma 812.

Polycarbonate lens and body. Epoxy encapsulated circuit board. Zinc plated steel contacts.

07 Amp P2PC 1 Amber 812.420866 * Alternatives to 12-diode marker lamps 812.420254 and 812.42055.

Polycarbonate lens & body Epoxy coated circuit board Dimensions Colour # of Diodes Function Voltage Amp Draw SAE Art. No. Qty.

7 LED CLEARANCE MARKER LAMPS - REFLECTIVE Contacts: Zinc plated steel Epoxy encapsulated circuit board Polycarbonate lens & body Colour # of Diodes Dimensions Function Voltage Amp Draw SAE Art. No. Qty. Amber 2-1/2" ø ma Clearance marker/ reflector 12 V AP2 1 Red 3/4" depth 63.2 ma LED MARKER LAMPS 4 Diode Series Come with base mount, hotwire and built-in ground. Quick installation without pigtail. Polycarbonate lens and body. Epoxy encapsulated circuit board. Zinc plated steel contacts. Dimensions (LxWxH) Colour Super Flux diodes Function Amp draw SAE Art. No. Qty. Red " x 1-1/2" x 7/8" 4 Clearance marker 0.07 Amp P2PC 1 Amber * Alternatives to 12-diode marker lamps and SEALED LAMPS Base mount, hotwire and built-in ground Quick installation without pigtail Base mount: ABS Contacts: Zinc plated steel Polycarbonate lens & body Epoxy coated circuit board Dimensions Colour # of Diodes Function Voltage Amp Draw SAE Art. No. Qty. L x W x H Amber ma /8 x 1-1/4 x 7/8" Clearance marker 12 V P2 1 Red 156 ma LED LICENSE LAMP Lens: PMMA Body: ABS Contacts: Hard wired Circuit board: epoxy coated Colour # of Diodes Dimensions Mounting Function Voltage Amp Draw SAE Art. No. Qty. White 12 4 x 1 7/8 x 2 1/8" 2" centre License 12 V ma L JULY LIGHTING 7

MID-TURN SIGNAL LAMP Contacts: Zinc plated steel Circuit board: epoxy coated Polycarbonate lens & body Colour # of Diodes

Amber 9 6 1/2 x 2 1/2 x 2 3/4" 2 3/4" depth Mid-turn reflector, Clearance marker 12 V 87 ma / 157 ma AE2P2 812.

Right PVC Angle Plug 812.420250 Double Contact Pigtail 9" Straight PVC Plug 16 GA 1 #10 Ring Terminal 812.

Dim. Art. No. Qty. Open back 812.420246 4" 5 1/4" ø 4 1/2" ø Closed back 812.420247 Open back 812.420240 Round 2.

8 MID-TURN SIGNAL LAMP Contacts: Zinc plated steel Circuit board: epoxy coated Polycarbonate lens & body Colour # of Diodes Dimensions L x W x D Mounting Clearance Function Voltage Amp Draw SAE Art. No. Qty. Amber 9 6 1/2 x 2 1/2 x 2 3/4" 2 3/4" depth Mid-turn reflector, Clearance marker 12 V 87 ma / 157 ma AE2P MOUNTING ACCESSORIES Contact Pigtails Zinc plated copper contacts Description Style Length Wire Gauge End Art. No. Qty. Right PVC Angle Plug Double Contact Pigtail 9" Straight PVC Plug 16 GA 1 #10 Ring Terminal Right PVC Angle Plug Single Contact Pigtail 6" PVC Grommets Style For lamp size Type Dimensions Sugg. Hole. Dim. Art. No. Qty. Open back " 5 1/4" ø 4 1/2" ø Closed back Open back Round 2.5" 3 3/8" ø 2 25/32" ø Closed back Open back " 2 7/8" ø 2 5/16" ø Closed back Open back Oval N/A 7 3/8 L x 3 1/8" W 6 1/2 L x 2 1/2" W Closed back NEW! WURTH.CA 2017

RUBBER-LIKE WORK LAMPS Sealed beam with housing work lamp Work lamp housing made from high-impact synthetic rubber-like resin.

Mounting hardware is steel with zinc plating. 12V application. Dia. Dimensions (height x depth) Mounting stud size Function Light Pattern Watts Candlepower Art. No. Qty.

450201 1 * In a trap/work design, light is dispersed in a trapezoidal shape, unlike a spotlight HALOGEN WORK LAMP Double halogen bulb work lamp Work lamp housings are made from rugged high-impact

9 RUBBER-LIKE WORK LAMPS Sealed beam with housing work lamp Work lamp housing made from high-impact synthetic rubber-like resin. These have the feel and shock absorbing characteristics of rubber but are UV resistant (colour will not fade or crack) and stand up to road contaminants that deteriorate rubber lamp housings. Mounting hardware is steel with zinc plating. 12V application. Dia. Dimensions (height x depth) Mounting stud size Function Light Pattern Watts Candlepower Art. No. Qty. 5" 5-7/8" H x 3" D 5/16" Off-road work lamp Trap/Work* * In a trap/work design, light is dispersed in a trapezoidal shape, unlike a spotlight HALOGEN WORK LAMP Double halogen bulb work lamp Work lamp housings are made from rugged high-impact nylon housing. Twin replaceable halogen high output bulbs (H3). Operates with one or two bulbs lit. Bracket is powder-coated steel with adjustable mounting hardware. Recommended: Replacement Bulb Art. No P.Qty: 2 Dimensions (LxWxH) Mounting stud size Function Light Pattern Watts Art. No. Qty. 6-1/4" x 4-3/4" x 4-1/8" 10 mm Off-road work lamp Flood W ea.) LED WORK LAMP Work lamp with high output LEDs High light output with 8 high output LED diodes. Low amp draw. Emits clear white light, with an optimum working distance up to 300 ft. Stylish compact aluminum housing with black powder coating, polycarbonate lens and stainless steel adjustable mounting hardware. Epoxy encapsulated circuit board. 9V 36V applications. 840 Lumens/5600 CP Dimensions (LxWxH) Mounting stud size Function High output diodes Amp draw Art. No. Qty. 4-3/8" x 4-7/8" x 1-7/8" 5/16" Off-road work lamp Amp JULY LIGHTING 9

INCANDESCENT SEALED LAMPS Round sealed lamps Polycarbonate lens and body. Hermetically sealed to resist road dirt, dust and moisture. Zinc plated steel contacts.

Qty. Round sealed Amber Clearance marker 0.35 Amp P2 812.420862 2" x 3/4" Round sealed Red Clearance marker 0.35 Amp P2 812.420714 Round sealed Amber Clearance marker 0.35 Amp P2 812.420863 Round sealed Red Clearance marker 0.

10 INCANDESCENT SEALED LAMPS Round sealed lamps Polycarbonate lens and body. Hermetically sealed to resist road dirt, dust and moisture. Zinc plated steel contacts. Contacts are compatible with industry standard pigtails. Meets all DOT FMVSS108 & MOT CMVSS108 safety standards. Description Dimensions (Dia. x H) Colour Function Amp draw SAE Grommet Pigtail Art. No. Qty. Round sealed Amber Clearance marker 0.35 Amp P " x 3/4" Round sealed Red Clearance marker 0.35 Amp P Round sealed Amber Clearance marker 0.35 Amp P Round sealed Red Clearance marker 0.35 Amp P Round sealed with reflective 2-1/2" x 3/4" Amber Clearance marker/reflector 0.35 Amp AP2 lens Round sealed with reflective Red Clearance marker/reflector 0.35 Amp AP2 1 lens Round sealed, shock Amber Signal/park Amps IP mounted Round sealed, shock Red Stop/turn/tail/park Amps STIP mounted /4" x 2" Round sealed with reflective Stop/turn/tail/rear reflector/clearance Red 0.6/2.5 Amps AIP2ST lens marker Round back up lamp White Back-up 2.2 Amps R Oval sealed lamps Polycarbonate lens and body. Hermetically sealed to resist road dirt, dust and moisture. Zinc plated steel contacts. Meets all DOT FMVSS108 & MOT CMVSS108 safety standards. Refer to legend below Dimensions (LxWxH) Colour Function Amp draw SAE Grommet Pigtail Art. No. Qty. Amber Signal/park 0.6/2.5 Amps STIPP /2" x 2-1/4" x 2-3/8" Red Stop/turn/tail/park 0.6/2.5 Amps STIPP White Back up 2.22 Amps R Refer to legend below Accessories Guide Grommets Style Lamp Size Type Art. No. Colour Code 2" Open back " Closed back Round 2.5" Open back " Closed back " Open back " Closed back Oval Open back Closed back Pigtails Description Style Art. No. Colour code Right angle plug Double contact Straight plug Double contact Right angle plug Single contact NEW! WURTH.CA 2017

INCANDESCENT SEALED LAMPS 1" x 4" Sealed lamps Dimensions (LxWxH) Colour Function Amp draw SAE Art. No. Qty. 4" x 1-1/4" x 7/8" Amber Clearance marker 0.7 Amp P2PC 812.

Hermetically sealed to resist road dirt, dust and moisture. Zinc plated steel contacts. Meets all DOT FMVSS108 & MOT CMVSS108 safety standards.

Pigtail: Right PVS angle plus with 16 GA wire. Mounting: 2" centre. Dimensions (LxWxH) Function Amp draw SAE Art. No. Qty. 3-1/2" x 2-1/2" x 2-1/4" License 0.35 Amp L 812.

No. 721.670100 10 INCANDESCENT BULLSEYE MARKER LAMPS In polycarbonate housing High impact molded bodies with replaceable snap-on lens. Meet all FMVSS108 DOT and MOT CMVSS108 safety standards.

11 INCANDESCENT SEALED LAMPS 1" x 4" Sealed lamps Dimensions (LxWxH) Colour Function Amp draw SAE Art. No. Qty. 4" x 1-1/4" x 7/8" Amber Clearance marker 0.7 Amp P2PC " x 1-1/4" x 7/8" Red Clearance marker 0.7 Amp P2PC Come with base mount, hotwire and built-in ground. Quick installation without pigtail. Polycarbonate lens and body. Hermetically sealed to resist road dirt, dust and moisture. Zinc plated steel contacts. Meets all DOT FMVSS108 & MOT CMVSS108 safety standards. INCANDESCENT LICENSE LAMPS In polycarbonate housing License lamp kit with sealed lamp and pigtail. Polycarbonate lens and body (gray). Zinc plated steel contacts. Pigtail: Right PVS angle plus with 16 GA wire. Mounting: 2" centre. Dimensions (LxWxH) Function Amp draw SAE Art. No. Qty. 3-1/2" x 2-1/2" x 2-1/4" License 0.35 Amp L Chrome plated steel housing Mounting: 2" centre. Dimensions (LxWxH) Function Amp draw SAE Art. No. P. Qty. Replacement bulb Qty. 2-3/4" x 1-1/2" x 2" License 0.6 Amp L Art. No INCANDESCENT BULLSEYE MARKER LAMPS In polycarbonate housing High impact molded bodies with replaceable snap-on lens. Meet all FMVSS108 DOT and MOT CMVSS108 safety standards. White ABS body. Acrylic lens. Mounting: 3" centre. Dimensions Amp draw (LxWxH) Colour Function SAE Art. No. Qty. Replacement lens Qty. Replacement bulb Qty. 4" x 2" x 1" Amber Clearance marker 0.7 Amp P " x 2" x 1" Red Clearance marker 0.7 Amp P JULY LIGHTING 11

12 COMING SOON! WÜRTH LIGHT BULB EXPANSION! FALL NEW! WURTH.CA 2017

13 24 VOLT WURTH BULBS- PREFIX (12V) JULY LIGHTING 13

14 24 VOLT WURTH BULBS- PREFIX 720 ASSORTMENTS Art. No Bulb Start-Up Assortment Contents (84 Pieces): Assortment of Prefix 721 bulbs EUROPEAN/ASIAN LIGHT BULBS - PREFIX WURTHCANADA.COM 2017

Visit us at www. sgidistributorsltd.com

Visit us at www. sgidistributorsltd.com 41-1610 9 Volt Mastercell Alkaline 41-1620 D Cell 2pk Mastercell Alkaline 41-1622 AA 2pk Mastercell Alkaline 41-1623 AAA 2pk Mastercell Alkaline 41-1624 AAA 4pk Mastercell Alkaline 41-1632 C Cell 2pk Mastercell