AC Single Point Actuator
|
|
- Noah Gregory
- 5 years ago
- Views:
Transcription
1 130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled nylon, black Clip: acetal, black Spring: Stainless steel, passivated 56 (2.20) 40±0.2 (1.57±.008) 45 (1.77) Housing T-handle 60 (2.36) Pull direction AC ±0.2 (.98±.008) 4 x Ø 4.5±0.1 (.18±.004) (For thru hole mounting) (4.11) 117 Open (4.61) AC Single Point Actuator Paddle Front mount installation Flush Two cable mounting options 53.7 (2.11) 80±0.3 (3.15±.012) 4 x R5 (.2) Max. 2 x Ø 4.5±0.1 (.177±.004) (For thru hole mounting) 21±0.2 (.83±.008) 42±0.5 (1.65±.02) Paddle and housing: 33% glass-filled nylon, black Spring: Stainless steel, passivated 28.7 (1.13) 5.7 (.22) (4.26) Panel 91.6±0.3 (3.61±.012) 5.8±0.1 (.23±.004) 38.3 (1.51) Panel thickness Cable placement 2 Cable placement 1 Cable Orientation Panel Thickness Cable Travel Placement (.49) max (.44) AC Placement 2 16 (.63) max (.52)
2 AC Single Point Actuator Push-button (.24) 64.6 (2.54) Knob Ø 26 (1.02) Ø 38 (1.50) Mounting nut Housing Door panel 26 (1.02) Max. panel thickness +1 Ø (1.26 ) 30±0.2 (1.18±.008) Double-D hole preparation Flush Mounting hardware included Push button and housing: PC/ABS, black Cam: 33% glass-filled nylon, black Spring: Stainless steel, passivated ACTUAL SIZE Cam 13.7 (.54) Cable travel AC AC Retainer Clips and Cables For use with Ø 4 (.157) rod or Southco cable assembly See Retainer clip Latch Series Retainer Clip R4-10 R R4-30 R4-20 R R4-50 Retainer clip see table Cable assembly contact Southco
3 AC-30 Multi Point Actuator Push-Button Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Single hole install Button: Nylon Housing: Zinc or Stainless Steel Lock Plug: Zinc Cam, Washer, Rivet: Stainless Steel, Passivated With cam attachment shown 28 (1.10) 64 (2.52) Without cam attachment shown Ø32 (1.26) Ø32.3 (1.27) Max No Spacer required if panel thickness > 10.3 (0.405) Panel Thickness from 1 to 22 (0.04 to 0.87) Max 2 X Ø5 ±0.1 (0.197 ±0.004) Push Travel 12 (0.47) 10 (0.39) Cam/ Cable Travel Ø 38.3 (1.51) 51.4 (2.02) Ø 28.8 (1.13) 29.1 (1.145) Max Ø4.1 (0.16) 2 (0.08) Housing Seal 28 (1.10) Tab Washer Spacer 42 (1.65) Metal Nut Push Down 12 (0.47) Cable Holder E-Ring Ø 32.4 (1.27 ) Panel preparation thickness 1 (0.04) to 22 (0.87) Selection 29.2 (1.15 ) E End Style 1 With Cam attached 3 Without Cam attached H Housing Material 1 Zinc with black powder coat 3 Stainless steel with black powder coat AC E L M - H B - KC B Button Material 1 Nylon with black molding L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) KC Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 With spacer mounting (must have if glass panel) 2 Without spacer mounting
4 AC-40 Multi Point Actuator Push-Button Handle With cam attachment shown Ø 32 (1.26) Ø 32.3 (1,27) No Spacer if Panel Thickness > 4.6 (0.18) 34 (1.34) 28.8 (1.13) (7.14) 47 (1.85) Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Easy Grip Panel Thickness from 1 to 16.8 (0.04 to 0.66) Max. Without cam attachment shown (2.28) 2 X Ø5 ± (2.02) Cam/Cable Travel 10 (0.39) Ø 4.1 (0.16) 142 ±1 (5.59 ±0.02) 34 (1.34) Button: Nylon Housing: Zinc Die Cast or Stainless Steel Lock Plug: Zinc Die Cast Cam, Washer, Rivet: Stainless Steel, Passivated Ø44 (1.73) 36 (1.42) 12 (0.47) Push Down M8 X 1.25 thread 18 depth Min (Max mounting torque: 40 N M) 142 ±1 (5.59 ±0.02) E End Style 1 With Cam attached 3 Without Cam attached (1.15 ) for Cable Cross Mounting Ø 32.4 (1.27 ) 29.2 (1.15 ) for Cable Parallel Mounting 8.4 ±0.1 (0.33 ±0.004) 13 ±0.2 (0.51± 0.008) H Handle Material 1 Black GF nylon with zinc housing insert 2 Black GF nylon with stainless steel housing insert Selection AC E L M - H B - KC L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) B Button Material 1 Nylon with black molding KC Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 Cable parallel (or no cable), with spacer mounting (must have if glass panel) 2 Cable parallel (or no cable), without spacer mounting 3 Cable cross with spacer mounting (must have if glass panel) 4 Cable cross without spacer mounting Global Corporate Headquarters and Americas Customer Service & Technical Support Center Tel: (1) Fax: (1) info@southco.com Southco AC-30/40 752NA 05-11
5 AC-75 Single Point Actuator Paddle Front mount installation Flush Three cable mounting options Paddle and housing: Aluminum, black powder coated 96.2 (3.78) 13 (0.51) 37.1 (1.46) 49.2 (1.94) Door Cable Placement (1.19) Cable Placement 2 Cable Placement (1.38) 73 (2.87) 4X R5 Max 2X Ø 4.5 ±0.1 (.177±.004) (For thur hole mounting) 18.9 (0.74) 37.9 (1.49) 81 (3.2) 4 ±0.1 (0.15 ±0.003) AC Cable Orientation Panel Thickness Cable Travel Placement (.49) max (.44) Placement 2 16 (.63) max (.52) Placement 3 16 (.63) max (.52) Southco AC NA Global Corporate Headquarters and Americas Customer Service & Technical Support Center Tel: (1) Fax: (1) info@southco.com
6 AC Single Point Actuators Stainless Steel M1 Style Actuator 38mm (1 1/2") version 50mm (2") version Ø 47 (1.85) Ø 61 (2.40) 34 (1.3) Door thickness () Door Small Ø38.1 ±0.5 (1.5 ±.02) Large Ø (2.0 ) Mounting Bracket Cable travel 13 (.51) Door thickness () 2.5 (.98) Small 38mm Version 3.0 (1.2) Large 50mm Version Cable retainer (Sold separate) (1/8 Mounting screw not included) Actuator Assembly () Link Retainer (Sold separate) R Single, round-hole installation Locking style restricts access Premium finish and corrosion resistance Latch: 316 grade stainless steel and bright polished Spacer: Nylon, black Contact Southco for other finishes Performance Details Max. static load: 545 N (122 lbf) Accessories (Small) One key supplied per latch for additional keys order M S 50mm (2 ) version AC - M1 - L P mm (1 1/2 ) version: (suits 9mm (3/8") or 12mm (1/2") panels): AC - M L 1-8 AC Cables M5 Phillips Recess (No.2) Pan Head Mounting Screws Cable Retainer (Sold separate) (1/8 Mounting Screws not included) L Lock style 4 Locking (2 keys supplied) 6 Non-locking 7 Key-locking keyed alike S008 (2 overmoulded keys supplied (only available for 50mm 2 version) P Panel thickness 2 9mm (3/8 ) 3 12mm (1/2 ) Keeper: M Mounting screws: M Accessories (Large) Keeper Part number: M For lock style 4 Key (pair) Part number: M1-546 For lock style 7 Overmolded key S008 (pair) Part number: M S008 Actuator End (Option J shown) Optional spring to ensure cable reset) Latch End A Actuator fitting J Stainless barrel fitting to suit push-button and paddle actuators K Stainless L fitting to suit R4 latch and AC-M1 actuators L mm (2.57) L 48mm (1.89) S Spring option 0 No Spring 1 With Spring (latch end only) AC - C A K S LLLL 48 Cables Constructed from marine grade stainless materials, the cable is suitable for multiple bends and can be further customised upon request, Contact Southco Marine for details. An in-built spring prevents unintentional actuation by boat vibration. L Length in mm e.g = 610 mm = 2
7 R4 Push-to-Close Latch Striker bolt Stainless Steel Mini Installation Striker bolt for R4-10 series rotary latch 304 Stainless Steel Striker Bolt Assembly (sold separately) 12.7 (.50) Hex 2.8 (.11) 38.1 (1.50) 27.7 (1.09) 25.4 (1.00) M8 x 1.25 thread Striker Bolt R Retainer clip (sold separately) Secures cable to AC-M1 actuator : R Ø 25.4 (1.00) Ø 9.5 (.37) Striker bolt O-Ring Washer Striker 90 Mounting Bracket (sold separately) : R Cable Mounting Bracket (sold separately). For use with AC-M1 actuators 8 (0.31) 14 (0.55) 26 (1.02) 40 (1.57) 10 (0.39) 6.6 (0.26) A 28 (1.10) 12 (0.47) 4.5 (0.18) Ø4 (Ø 0.16) 14 (0.55) Panel Preperation 3.5±0.05 (.14±.002) 2 x A Panel thickness R mm (1.10) 9mm (0.35) R mm (1.22) 12mm (0.47) 22.5±0.1 (.89±.004) 9 (.35) Max. 26 (1.02) Min. 5 (.20) Min. Operation To request a quote, please releases@dbroberts.com, or call us at Southco R4SS 722NA Latched position Global Corporate Headquarters and Americas Customer Service & Technical Support Center Tel: (1) Fax: (1) info@southco.com Unlatched position
AC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationMultiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164
162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More information64 Push-to-Close Latch
244 64 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf)
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationModularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationH3 Swinghandle System
192 H3 Swinghandle System Medium / large Sealed / non-sealed Zinc alloy swinghandle system Multiple locking options; including DIN profile Indoor/outdoor version Available for medium (125mm x 25mm and
More informationRotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
More informationstyle vision & paddle latches paddle latches section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
paddle latches vision & style paddle latches INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 1 paddle latches No. 4000 No. 4000 Mini
More information19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
More informationAero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
More informationCabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
More informationHandle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass
HANDLES GRAB/PULL No. HAPL2550/265SS wgt. 0.24kg 265mm hole centres 2 x 10mm dia. fixing holes Plated Diecast Steel No. HAPL2923/150 wgt. 0.19kg 150mm hole centres 2 x 6mm dia. fixing holes Plated Diecast
More informationEntry and Cabin door Locks & Latches (Swing)
MARINE PRODUCT OVERVIEW Engineered Access Solutions 2 Entry and Cabin door Locks & Latches (Swing) Electronic Access Solutions Hinges & Display Mounts Entry Door Locks & Latches (Slide) Compression, Cam
More informationDOOR MECHANISMS. Commercial Body Fittings 7th Edition
mm Unbushed Door Locking Mechanism Zinc Plated Comm Lock 27mm Bushed Door Locking Mechanism Galvanized Self-aligning snug fit Cam Cam Weld Recess Ø Handle Cover Bushed Bracket c/w plastic insert Bracket
More informationAbout.
TM About Harris Hardware was founded in 1909 in Brooklyn, NY. During our long history, we have been a leading supplier of hardware to various specialty markets. Since 1980 Harris has manufactured custom
More informationTHIS PAGE LEFT BLANK INTENTIONALLY
THIS PAGE LEFT LANK INTENTIONALLY ARREL EXCHANGE SYSTEM The housings shown on this page all share a common part: an innovative removable barrel. In seconds, and without the need for any special tools,
More informationTable of Contents. Page. Latches. Handles. Page
Table of Contents Latches Page Slam Action (hook, pivoting & rotating catch) 030-0500 Pivoting Catch Compartment Latch... 36 030-0550 Heavy Duty Pivoting Catch Compartment Latch... 37 030-0600 Rotating
More informationabout southco CONNECT CREATE INNOVATE 5 Years of Continuous Development
Southco s ROTARY Latching solutions CONNECT CREATE INNOVATE THE R4 ROTARY LATCH SYSTEM 5 Years of Continuous Development Over the last 5 years, Southco has invested in the expansion of our rotary latching
More informationPre-Packaged Hardware
New! Pre-Packaged Hardware Panel & Pilaster Packs 2-Ear Wall Bracket Headrail Bracket Wrap-Around Pivot Hinge () Strike / Keeper (Outswing) Slide (Outswing) Door Stop Door Hardware Packs The Story Originally
More informationstyle vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb
More informationPT SS/MI - Pass Thru
PT 2424-24 SS/MI - Pass Thru TABLE OF CONTENTS 1) 2) 3) 4) Pass Thru Brochure Pass Thru Drawing Operation Instructions Parts List Latch Info Hinge Info Spring Info Halco Warranty Pgs. 2-3 Pg. 4 Pgs. 6-8
More informationD8 DZUS PANEX Quarter-Turn Fasteners
392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)
More informationTruth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
More informationCut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L LOCKS
111 112 Cut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L C L C L C L C L C L C L C L C L 113 C L PRODUCT NUMBER T1 T2 T3 V1 W1 EWTC140, EWTP140 WTC140, WTP140 UES052047 X UES052048
More informationSAF-T-LINER MVP-ER PARTS MANUAL. Doors Section. Page 4-1. Doors 10/96
Doors Section Doors Page 4-1 Stepwell - Outward Opening Page 4-2 Doors Stepwell - Outward Opening Item Part Num. Number Qty. Description Notes 1 47001449 1 Trim - Step, Entrance, Diamond Plate 2 47001450
More informationSwing Handles & Latches
ov-swing-handles-&-paddle-latches-divider - Updated - 12-01-2017 w Swing Handles - Cam Control Swing Handles - Rod Control Flush T-handle Latches Paddle Latches Swing Handles & Latches 30 Swing Handles
More informationTriMark. Service & Replacement Parts
TriMark Service & Replacement Parts TriMark Service and Replacement Parts provides the standard vehicular hardware products and keys to OEM s in the construction, agriculture, truck (on and off-road),
More informationHARDWARE TABLE OF CONTENTS
J HARDWARE TABLE OF CONTENTS Hardware Tie Loop...J- Safety Latches...J- S Hooks...J- Quick Link...J- Slip Hook...J- Grab Hook...J- Safety Chain...J- Chain...J- Snap Hooks...J- Rope Rings...J- D Rings...J-
More informationAV Series Dynamic Mount
60 AV Series Dynamic Mount Tilt and swivel Compact Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Consistent repeatable operation Factory
More informationstyle vision & push buttons push buttons section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
push buttons push buttons vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 149 notes 150 EBERHARD INDUSTRIAL, VEHICULAR
More informationMETALPLAST-SOPRANA srl BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
5 LOCKS >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 COMPRESSION LEVER LATCH WITH KEY CODES 140143-140142
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationLocks. Call from anywhere in Canada - Locking Systems - Overview...493
Locking Systems - Overview...493 Lever Bit/Skeleton Keys and Accessories...494 496 Symo 3000 Locking System...497 511 Cylinder Module System...512 529 Cam Locks...516, 530, 537, 541, 543 Deadbolt Locks...514
More informationsection section eclipse series2 vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15
vision & style section eclipse series INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15 No. ECL-750-KP9 Patent pending No. ECL-750-KP9
More informationLOCKS ORB1. Orbit Lock. Whale Tail Compression Lock WTC140, WTP COMPRESSED 68 RELEASED. MATERIAL Stainless Steel 304, Die-Cast Zinc Alloy
118 117 Orbit Lock ORB1 140 70 14 Stainless 304, Die-Cast Zinc Alloy Polished Chrome WEIGHT 1.4kg 156 132 84 62 M6 mounting screws supplied Suitable for tough conditions Fits standard T-lock cutout ACCESSORIES
More informationLOGO OPTIONS: TRUTH TIPS:
DOUBLE HUNG SLIDER 19 Truth Hardware s Positive Action Lock (PAL) Systems are some of the most versatile and easy to operate locking systems in the marketplace today. Available in the original Push Button
More informationACCESS SOLUTIONS. NEW PRODUCTS OVER
OVER 250 NEW PRODUCTS ACCESS SOLUTIONS Search our range of over 2000 RoHS and REACH compliant parts, and find your industry solution across cabinet manufacturing, machine building, power generators, HVAC,
More informationPersonal Care Commode
Parts Catalog Issued: Jun 2, 2009 Personal Care Commode Yes, you can. Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service
More informationMETALPLAST-SOPRANA srl BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
1 5 LOCKS >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 COMPRESSION LEVER LATCH WITH KEY CODES 140143-140142
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV310G MINI RACK OVEN ML-132515 OV310G A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 Rev. D (January 2018) F-43242 Rev. D (January
More information8' - 10' Dinghy NOTE: Deck Camber is actually 5 degrees downwards on Beatrix. This drawing shows it as horizontal.
Threefold purchase. Place two triple-sheave blocks 3 feet apart, with the hooks or straps facing outboard, positioning the blocks so one is face down and the other is cheek down. Start reeving in the center
More informationTable of Contents. Latches. Page. Two-Rotor. Single-Rotor 050- Sliding Bolt. Dead Bolt Two-Rotor Latch... 11
Table of Contents Latches Page Two-Rotor 050-0100 Two-Rotor Latch... 11 050-0103 Two Rotor Latch 2-Position Intertrip... 12 050-0107 Two-Rotor Latch With Coaxial Trip... 12 050-0110 Two-Rotor Single-Position
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More information99125B - Series N Brush Lift Assembly Model :99125B 20" EZ Floorkeeper (w/ 4-6 V Batteries) - Series N
995B - Series N Brush Lift Assembly Model :995B 0" EZ Floorkeeper (w/ - V Batteries) - Series N Page- 5 7 9 0 5 7 9 5 7 9 0 5 7 9 0 070 RETAINING RING PIN 9 WASHER 907 WELDMENT BRUSH LIFT PEDAL 900 PEDAL
More informationFurniture Fittings Locks and Catches
Dead bolt rim lock Spring bolt rim lock Backset D 25 mm, short bolt travel Backset D 25 mm Cylinder housing length Area of application: For cylinder cores that are inserted from the : Nickel plated Cylinder
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationTERMS and CONDITIONS
TERMS and CONDITIONS Hour of operation ( mountain standard time ) 8.00 AM to 12.00 PM 12.30 PM to 4.30 PM Monday to Friday Terms of Payment Net 30 days from date of invoice - The seller reserves the right
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationINSTALLATION INSTRUCTIONS FRONT RUNNER GRILLE GUARD 2015 TRANSIT VAN (FULL SIZE)
INSTALLATION INSTRUCTIONS FRONT RUNNER GRILLE GUARD PARTS LIST: 1 Runner Grille Guard Center 6 12mm Lock Washers 1 Driver/Left Modular Wing 6 12mm Hex Nuts 1 Passenger/Right Modular Wing 2 8-1.25mm x 40mm
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MINI RACK OVEN OV310G ML-132515 A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 (October 2011) Table of Contents 3 ADVANCED CONTROL
More informationLippert Components, Inc. Informational Publication ENTRY DOOR LATCH INFORMATION - SOUTHCO
Lippert Components, Inc. Informational Publication LIP Sheet - 0182 revd ENTRY DOOR LATCH INFORMATION - SOUTHCO SOUTHCO, Inc. door latches are used in Lippert s Keyless Entry Door systems. All Southco
More informationSTEEL CUPBOARD LOCKS FIRE-HOSE CABINET LOCK
013 IRE-HOSE CABINET LOCK Designed for fire-hose cabinet Special fixing plate supplied for easy fixing lush design provides flat surface on cabinet Customized colours available ire hose cabinet BODY: KNOB:
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationADJUSTABLE FOOT INSERTS FOR ROUND TUBING
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING J D E F A B C G H I K INSERTS FOR 1-5/8 IN. (40MM) O. D. 16 GA. ROUND TUBING HEX FOOT Thermoplastic, or die-cast Zamak insert body with die cast or stainless steel
More informationNew Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS
New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS 1 Modifications & Custom Components Diverse manufacturing capabilities and experienced on-site technical personnel allow Dumeta to offer a wide
More informationParts Catalog Issued: Jan 17, Bed Rails
Parts Catalog Issued: Jan 17, 2017 Bed Rails Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have
More informationPARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
More informationDoor, Hatch & Interior Fittings
Sea Blue Security Locks NEW 10 Year Guarantee Sea Blue Security locks have been developed in the lock capital of England to withstand both corrosion and physical attack. Heavy steel full casings are used
More informationWashroom Accessories Service Parts List Price Book 0514WSP
Washroom Accessories Service Parts List Price Book 0514WSP Table of Contents Hair-Hand Dryers (Models 2870 thru 2874, 2889, 2896, & 2897) 2 Hand Dryers (Models 2875-28 & 2885-28, 2877-28 & 2887-28) 3 Aerix
More informationRYOBI MITER SAW MODEL NUMBER TS1353DXL
0 5 8 5 0 9 9 8 9 5 59 5 0 58 5 5 5 50 8 5 5 SEE FIGURE F 0 9 8 SEE FIGURE D 5 9 8 0 5 5 5 Figure A 55 The model number will be found on a plate attached to the motor housing. Always mention the model
More informationCAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
More informationPARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
More informationPersonal Care Commode
Parts Catalog Issued: Jan 23, 2004 Personal Care Commode Yes, you can. PARTS CATALOG USAGE GUIDE The information contained in this document is subject to change without notice. This catalog contains service
More informationWindow Locking 10YEAR. whitco.com.au
Window Locking 10YEAR whitco.com.au Contents CYL4 Push Lock CYL4 Mini Push Lock CYL4 Multi Bolt CYL4 Patio Bolt page 4 page 6 page 7 page 8 CYL4 Window Bolt CYL4 Mini Window Bolt Keyed Sash Lock Safety
More information2300/2320. MORTISE LOCKS AND HANDLESET ACCESSORIES (Keepers, Spacers, Adapters and Bumpers)
HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS 2300/2320 Truth Hardware realizes that each profile in the marketplace may require its own particular hardware component due to the variety of mounting applications
More informationFURNITURE & CABINET LOCK
FURNITURE & CABINET LOCK LOCK HARDWARE Www.ammalocks.com DRAWER LOCKS 1 DRAWER LOCK (DIAMOND BACK) 15.7 2.7 106 ITEM NO: 106 100 key changes, K/A, K/D FINISHES: nickel PACKAGING: 2 keys SUITABLE FOR: 7/8"
More informationINSTALLATION & OWNER S MANUAL
Rev. A, p. of 0 INSTALLATION & OWNER S MANUAL MASSEY FERGUSON GC2400 cab kit p/n MFGC2400 Installation Instructions The contents of this envelope are the property of the owner. Be sure to leave with the
More informationPARTS LIST. Clarke CTS10PLM 10 Table Saw Part Number:
PARTS LIST Clarke CTS10PLM 10 Table Saw Part Number: 6500741 Mitre Gauge Assembly 1 Mitre Gauge Knob NW303169-000 1 Mitre Gauge Body NW303169-000 1 Plastic Washer NW303169-000 1 Panhead Screw NW303169-000
More informationLocks. Product range:
Locks Product range: Coin Locks Combination Locks Espagnolette Locks Keys Lay on Locks Locks for Metal Furniture Lock Strikers Mortise Locks Padlock Handle Pedestal Locks Removable Cylinder Locks Rim Locks
More informationSecurity Screen Door Hardware
Security Screen Door Hardware 10YEAR whitco.com.au Contents Leichhardt Tasman MK2 Tasman Escape Tasman MK3 Sliding Security Screen Door Lock Security Door Lock Security Door Lock Security Door Lock page
More informationParts Catalog Issued: Oct 18, ICC - Tub TheraPure IH3602GXL, IH3652G, IH3752G, IH3802G, IH6302G, IH6302GADH
Parts Catalog Issued: Oct 8, 208 ICC - Tub TheraPure IH602GXL, IH652G, IH752G, IH802G, IH602G, IH602GADH Parts Catalog Usage Guide The information contained in this document is subject to change without
More informationScrew-on Dead Lock MAS 1074
Screw-on Dead Lock MAS 1074 Cylinder nickel-plated brass, reversible key made from nickel silver Rear plate and front plate are brass, brushed Connecting wood screws are nickel-plated brass 1 rosette type
More informationLOGO OPTIONS: You can personalize the Fusion Lock with your logo. Truth s pad printing
DOUBLE HUNG SLIDER 19 Appropriately named the Fusion System, Truth Hardware has successfully merged two separate pieces of window hardware into one completely revolutionary system. Truth has designed a
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationAccessories Cannon offers a wide selection of. Accessories Selection Guide
Cannon offers a wide selection of accessories that allow the design engineers to configure the product for their exacting needs. The accessories range from the simple actuating handle to junction and backshells,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationtable of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationMODEL DESCRIPTION IN LBS.
QUIC-RELEASE Oxygen Tank System Model QR-OTS- -U Parts and Mounting Information ZICO 00PM0 Rev. --7 Model QR-OTS-U allows you to mount any "M" through "J" cylinder. The system uses a QR-MV Multiversal
More informationMSRP List Price. Replacement Hardware, Accessories, and Locksmith Supplies. January 1, U.S. Dollars
U.S. Dollars Replacement Hardware, Accessories, and Locksmith Supplies MSRP List Price Auxilary Locks... 2 Replacement Rim Cylinders... 2 Replacement Door Knobs and Accessories... 3 Window and Door Locks...
More information20964/B 20964/B 2014 TOYOTA TUNDRA TUNDRA. Billet Grille. Fig 1. Fig 2
Billet Grille TOOLS REQUIRED: PARTS LIST: Socket Set (6) U-Nuts Flat/Phillips Screw Drivers (8) #10 Screws Pliers (2) #8 Screws ¾ (2) 2 Flange Bracket (1) Top Plate Overlay Bracket - driver (1) Top Plate
More informationMazda 3 & Mazdaspeed 3 Oil Cooler Installation Instructions
Page1 2007-2009 Mazda 3 & Mazdaspeed 3 Oil Cooler Installation Instructions Tooling: Jack and jack stands or a lift Socket wrench and torque wrench 10mm and 14mm sockets 3/16 Allen wrench 10mm wrench Pliers
More information1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *
-I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationSECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationP/N Rev 01 04/14-1- NOTE: If you are ordering hinges for your rear doors, order and/or
REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain
More informationSECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.
More informationAPPLICATION AND SWITCH ORDERING GUIDE
APPLICATION AND SWITCH ORDERING GUIDE CUSTOMER: DATE: CONTACT: PHONE: FAX: 1) APPLICATION INDOOR OUTDOOR MARINE ENVIRONMENT MOBILE EQUIPMENT OVERHEAD CRANE/HOISTING CRANE CHAIR PORTABLE EQUIPMENT FOOT
More informationClipper Defined. Shelving. Clipper Hi-Performance Shelving Systems. Growth with. Penco Hi-Performance Shelves. Growth with
Defined Clipper Hi-Performance Systems At the heart of the Clipper System is the ingenious Penco Clipper Clip. It is easily installed, holds the shelf firmly in place, can be repositioned at any time,
More information2" (50MM) ROTARY HAMMER
" (50MM) ROTARY HAMMER MODEL HR5000 05-03 75 7 70 80 39 3 4 5 6 7 8 63 58 59 60 6 57 56 55 54 3 53 5 5 4 5 6 7 8 9 0 3 4 4 4 43 44 45 46 47 48 49 50 38 37 40 5 6 7 36 35 34 33 3 3 8 9 30 99 84 85 83 8
More informationISO 9001:2008
DOOR Dutch, Standard Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the
More informationPARTS LIST CHARGER 2020 AB CHARGER 2020 DB
PARTS LIST CHARGER 2020 AB CHARGER 2020 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450
More informationSINGLE LEVER TOP MOUNT CONTROLS
SINGLE LEVER 20 Single lever / dual action control to operate both throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. SINGLE LEVER Enables easy and safe shifting
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationCOMPX TIMBERLINE REMOVABLE LOCK PLUG SYSTEM
COMPX TIMBERLINE REMOVABLE LOCK PLUG SYSTEM Wide Selection of Locks to Fit Most Furniture & Cabinet Applications Available in Several High Quality Finishes Removable Lock Plugs For Complete Keying Versatility
More information