RYOBI MITER SAW MODEL NUMBER TS1353DXL
|
|
- Veronica Ford
- 5 years ago
- Views:
Transcription
1 SEE FIGURE F SEE FIGURE D Figure A 55
2 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your MITER SAW or when ordering repair parts. PARTS LIST (FIGURE A) KEY PART KEY PART NO. NUMBER DESCRIPTION QTY NO. NUMBER DESCRIPTION QTY TABLE AND BASE ASSEMBLY LWR. BLADE GUARD ASSEMBLY (SEE FIGURE B)... (SEE FIGURE C) MITER KNOB * SCREW (0- X 5/ in. PAN HD.) SPACER SHOULDER BOLT 0- UNF PIVOT FLAT WASHER (M5.5 X X 0.8T) BEVEL SCALE INDICATOR LINK ACTUATOR * SCREW (M5 X 0.8 X 0 mm PAN HD.) DATA LABEL * WASHER (M. X X T) * SCREW-SHOULDER (M5 X 0.8 mm) * WAVY WASHER HEX SOCKET BOLT (5/-8 X in.) * NYLON LOCK NUT (M X.5P) WASHER (M8 X X.T) VERTICAL STOP PIN MITER FENCE ASSEMBLY FLAT WASHER (M0 X 0 X.T) WORK CLAMP ASSEMBLY BEVEL KNOB (M0 X 5 mm) WRENCH (/ in. X 00 mm) * SCREW (M X 8 mm) DUST BAG (O.D. / in.) * WAVY WASHER (M.5 X. X 0.T) WARNING (HANG TAG) * WASHER (M.5 X X 0.8T) HANDLE WARNING LABEL * WASHER (M.5 X X.5T) SCREW (M X 0 mm PAN HD.) LATCH PIN... & WASHER (M. X.5 X 0.8T) LATCH PIN KNOB KNOB (M X X 0 mm) SLEEVE SPECIAL BOLT TORSION SPRING (M X 5 mm) EXTENSION ARM ARM PIVOT SHAFT SLIDE FENCE HEX BOLT (M8 X.5 X 5 mm) STOP BLOCK ASSEMBLY 000 HEX NUT (M8 X.5)... INCLUDES WING SCREW * SCREW (M X 0. X 0 mm) EXTENSION ARM CLAMP BRACKET ASSEMBLY TABLE INSERT... (INCLUDES SCREWS) * SCREW (M X P X 0 mm - SET) DUST GUIDE * NUT (M X P X.8T) LASER ASSEMBLY COMPLETE MOTOR ASSEMBLY (0V - 5A) (INC. KEY NO. 59)... (SEE FIGURE E) LASER BLADE BOLT (M8) * HEX SOC. BOLT (M X.0 X mm) HEX L WRENCH (M5 X 5 mm) INNER BLADE FLANGE SLIDE FENCE ASSEMBLY BLADE (0 in. X 5/8 in. X T)... (INC. KEY NOS., 5, 5, 5)) BLADE COLLAR (Ø8) OPERATOR S MANUAL * ARBOR SCREW (M8 X mm) (REV:05) WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call * STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY
3 Figure B 0 9 8
4 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your MITER SAW or when ordering repair parts. PARTS LIST (FIGURE B) KEY PART NO. NUMBER DESCRIPTION QTY 0000 * HEX SOCKET BOLT (5/ -8 X.8 mm) LOCK WASHER (5/ in.) * FLAT WASHER (M8 X X T) SPRING INDEX NYLON NUT (M0 X.5P) FLAT WASHER (M0 X X.T) WAVY WASHER (M0 X X 0.5T) * SCREW (M X P X mm - PAN HD.) * WAVY WASHER (M.5 X X 0.T) * WASHER (M.5 X X 0.T) FLIP FOOT BASE RUBBER GROMMET WARNING LABEL (NO HANDS) MITER SCALE * COACH SCREW (RIVETS) TABLE ASSEMBLY MITER INDICATOR * SCREW W/WASHER (M X 0. X 8 mm)... WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call * STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY 5
5 8 9 5 Figure C 0
6 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your MITER SAW or when ordering repair parts. PARTS LIST (FIGURE C) KEY PART NO. NUMBER DESCRIPTION QTY 0000 * NUT (0-) * WASHER (/ X 5/ X 0.5T) PIVOT PLATE RETURN SPRING LOWER BLADE GUARD LOWER GUARD PLATE SCREW (0- SPECIAL) RUBBER WHEEL PLATE NUT GUARD WARNING LABEL (NO HANDS)... WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call * STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY
7 8 5 Figure D 8
8 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your MITER SAW or when ordering repair parts. PARTS LIST (FIGURE D) KEY PART NO. NUMBER DESCRIPTION QTY 0000 * SCREW W/WASHER (M X 0. X 8 mm) SAFETY GUARD PIVOT TABLE * LOCK SCREW (M8 X.5 X 9 mm) TABLE PIVOT SHAFT BEVEL SCALE * COACH SCREW (RIVET) TABLE ASSEMBLY (INC. KEY NOS. -8)... WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call * STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY 9
9 Figure E
10 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your MITER SAW or when ordering repair parts. PARTS LIST (FIGUR E) KEY PART NO. NUMBER DESCRIPTION QTY KEY PART NO. NUMBER DESCRIPTION QTY UPPER BLADE GUARD SPRING (. X X 0L) E-RING (E-) PIN DUST CHUTE * SCREW & WASHER (M5 X 0.8 X 0 mm) BEARING (0 LLU) ARMATURE ASSEMBLY W/ BEARINGS (INCLUDE KEY NOS. AND 9) BALL BEARING (08ZZ) BEARING RETAINER * WAVY WASHER (0 X.5 X 0.T) MOTOR HSG. W/ FIELD (SEE FIGURE F) BRUSH ( X 5 X ) BRUSH COVER * SCREW W/WASHER (M5 X 5 mm) END CAP * SCREW (M X mm - SPECIAL) * SCREW (M X mm) LOGO PLATE (UPPER GUARD) SPRING (. X 0.8 X L) * MICRO SWITCH (5-50 VAC) SWITCH ACTUATOR WIRE NUT * SCREW (M X 0 mm - PAN HD.) CORD CLAMP * SCREW (M X mm - PAN HD.) BEND RELIEF POWER CORD (AWG / C) * SCREW & WASHER (M X 0. X 8 mm) WARNING LABEL - UPPER GUARD * SCREW (M X 5 mm - PAN HD.) HANDLE ASSEMBLY (CARRY) HANDLE ASSEMBLY (MAIN) RUBBER SLEEVE * SCREW (0 X NF X 0 mm) SCREW (M8 X.5P - SPECIAL) NEEDLE BEARING (HK090) OUTPUT SHAFT ASSEMBLY * SCREW (M X 0.P X 0 mm + FLAT WASHER 0.8t)... WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call * STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY
11 9 5 8 Figure F
12 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your MITER SAW or when ordering repair parts. PARTS LIST (FIGURE F) KEY PART NO. NUMBER DESCRIPTION QTY BRUSH HOLDER ( X 5 mm) NUT HOLDER (M5) NYLON NUT (M5) MOTOR HOUSING FIELD W/LEADS (0V, 0T) * SCREW W/WASHER (M5 X 0.8 X 0 mm) BAFFLE LOGO (0 X mm) WARNING LABEL... WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call * STANDARD HARDWARE ITEM MAY BE PURCHASED LOCALLY
RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET
RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET 1 FIGURE A 36 26 25 24 SEE FIGURE B 23 27 20 28 29 30 35 31 37 33 2 10 22 11 12 9 21 13 14 17 16 15 32 18 31 19 34 SEE FIGURE D 8 6 5 4 2
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS20R-1 REPAIR SHEET
RYOBI in. (24 mm) TABLE SAW MODEL NO. BTS20R- REPAIR SHEET FIGURE A SEE FIGURE C SEE FIGURE K SEE FIGURE B SEE FIGURE I SEE FIGURE E SEE FIGURE H SEE FIGURE D SEE FIGURE J SEE FIGURE G SEE FIGURE F 2 The
More informationCRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET
CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 Figure A 4 5 7 8 0 4 5 7 8 0 5 4 7 8 0 5 4 5 7 8 40 4 4 4 44 45 4 4 47 48 50 4 5 5 4 5 54 5 55
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS20R REPAIR SHEET
RYOBI in. (2 mm) TABLE SAW MODEL NO. BTS20R REPAIR SHEET FIGURE A 2 2 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More informationRYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L1 REPAIR SHEET
RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L1 REPAIR SHEET 32 96 119 31 1 85 116 86 114 92 82 117 113 112 115 97 1 6 121 1 84 59 81 87 122 128 34 174 80 66 88 114 19 79 78 115 117 116 125 126
More informationRepair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at
0. Repair Parts Model No. MS0LZ 0 0 0 0 0 FIGURE A. 0. 0 0 0 0. 0 0 WARNING: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage
More informationRYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET
RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET 119 96 83 1 84 85 116 86 114 92 82 117 113 112 115 97 175 176 120 177 121 1 2 3 122 81 87 128 164 1 80 88 174 114 6 53 163 19 3 141
More informationRYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1340 REPAIR SHEET
RYOBI 10 in. (54 mm) COMPOUND MITER SAW MODEL NO. TS140 REPAIR SHEET FIGURE A 1 5 4 0 1 4 1 1 15 1 1 1 14 1 11 10 5 The model number will be found on a plate attached to the motor housing. Always mention
More informationCRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET
CRAFTSMAN 0 in. TABLE SAW MODEL NO..890 REPAIR SHEET 7 9 9 8 8 8 0 0 6 0 0 7 6 9 9 8 6 7 6 0 0 6 7 7 7 7 7 9 0 8 7 69 70 66 60 7 76 77 78 67 80 8 68 79 86 6 6 68 67 8 66 9 0 8 8 0 6 7 8 89 90 88 87 9 8
More informationRYOBI 10 in. (254 mm) BAND SAW MODEL NO. BS1001SV REPAIR SHEET
RYOBI 0 in. (54 mm) BAND SAW MODEL NO. BS00SV REPAIR SHEET 7 7 0 05 74 75 74 75 5 99 5 7 8 9 5 0 7 5 70 40 7 5 7 4 FIGURE A 5 0 9 4 07 77 0 8 8 5 5 8 55 7 4 5 8 5 0 54 09 8 58 59 57 9 0 0 48 9 0 79 8 7
More informationRYOBI 10 in. TABLE SAW MODEL NUMBER RTS10G REPAIR SHEET
RYOBI 10 in. TABLE SAW MODEL NUMBER RTS10G REPAIR SHEET 1 1 6 1 6 0 9 9 6 0 6 1 0 9 9 0 6 0 1 1 1 1 16 10 11 1 1 19 1 0 See Figure E 9 See Figure D See Note Page 11 9 FIGURE A 60 9 1 1 60 61 6 1 6 6 6
More informationCRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET
CRAFTSMAN 10 in. TABLE SAW MODEL NO. 1.276670 REPAIR SHEET For Miter Table Assembly, Refer To Figure B For Height/Bevel Adjustment Handwheel, Refer To Figure D For Rip Fence Assembly, Refer To Figure C
More informationCRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET
CRAFTSMAN in. TABLE SAW MODEL NO. 1.2100 REPAIR SHEET 44 144 4 Figure B 10 14 1 12 12 12 4 4 Figure A 14 1 1 1 1 4 1 4 121 2 4 140 1 11 11 11 42 1 1 120 12 21 40 4 1 141 2 4 11 SEE NOTE 11 114 0 1 2 2
More informationRYOBI 10 in. TABLE SAW MODEL NUMBER RTS21 REPAIR SHEET
RYOBI 10 in. TABLE SAW MODEL NUMBER RTS1 REPAIR SHEET 91 11 7 3 4 1 1 77 3 SEE NOTE 9 73 7 74 77 7 7 4 100 9 70 7 37 3 7 99 97 7 9 9 90 1 90 9 9 9 93 14 1 3 13 3 4 37 3 33 71 9 3 3 9 30 31 7 1 1 7 9 9
More informationRIDGID 12 in. SLIDING COMPOUND MITER SAW MODEL NUMBER MS1290LZ1 FIGURE A. See Figure E
9 FIGURE A 77 7 8 78 1 0 8 7 1 0 19 18 17 1 1 1 1 79 9 See Figure E 11 10 7 7 80 8 9 7 9 7 81 9 8 8 0 8 8 9 8 8 9 0 1 0 7 1 1 1 9 0 1 7 70 7 7 7 7 71 1 81 7 7 PARTS LIST FOR FIGURE A 1 801 BASE/TABLE ASSEMBLY...1
More informationCRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET
CRAFTSMAN 10 in. TABLE SAW MODEL NO. 315.218280 REPAIR SHEET 33 1 34 2 14 15 4 5 6 16 3 7 37 11 9 8 12 10 27 13 28 29 67 30 31 68 64 32 33 43 44 41 36 35 17 18 20 19 26 25 24 21 23 22 49 47 49 50 48 51
More informationMODEL NO. 8TS20 REPAIR SHEET
RYOSI 10 in. (254 mm) TABLE SAW MODEL 8TS20 REPAIR SHEET Complete Assemblies Added 01/02/2009 by Gardner Inc. Complete Blade Guard Assembly A131011001 Complete Motor Assembly A131010101 Complete Miter
More informationEMS-1830SC. Double Bevel Sliding Compound Mitre Saw Fig-1. Revision Date 28/06/2005
Double Bevel Sliding Compound Mitre Saw Fig-1 Double Bevel Sliding Compound Mitre Saw Fig-2 Double Bevel Sliding Compound Mitre Saw Fig-3 Double Bevel Sliding Compound Mitre Saw Fig-4 Double Bevel Sliding
More informationRYOBI TILE SAW MODEL NO. WS750L REPAIR SHEET
RYOBI TILE SAW MODEL NO. WS0L REPAIR SHEET Figure A 20 2 2 2 2 0 22 2 2 2 2 2 2 2 The model number will be found on a plate attached to the extrusion. Always mention the model number in all correspondence
More informationRepair Parts Parts List For RIDGID 12" Compound Miter Saw Model No. MS12502 RIDGID parts are available on-line at
Parts List For RIDGID " Compound Miter Saw Model MS0 Figure 0 0 0 0 Parts List For RIDGID " Compound Miter Saw Model MS0 Figure Always order by part number - not by key number 0 0 0-0- 0-0 -0 0 0 00 Fence
More informationRIDGID 10 in. TABLE SAW MODEL NO. TS2400LS REPAIR SHEET. RIDGID SCIE À TABLE DE 254 mm (10 po) NO. DE MODÈLE TS2400LS FEUILLE DE RÉPARATION
RIDGID 10 in. TABLE SAW MODEL NO. TS2400LS REPAIR SHEET RIDGID SCIE À TABLE DE 254 mm (10 po) NO. DE MODÈLE TS2400LS FEUILLE DE RÉPARATION RIDGID SIERRA DE MESA 254 mm (10 pulg.) NÚM. DE MODELO TS2400LS
More informationRIDGID 10 in. (254 mm) TABLE SAW MODEL NO. TS3650 REPAIR SHEET
RIDGID 0 in. ( mm) TABLE SAW MODEL NO. TS0 REPAIR SHEET 0 FIGURE A The model number will be found on a plate attached to the cabinet. Always mention the model number in all correspondence regarding your
More informationRIDGID 10 in. TABLE SAW MODEL NO. TS3660 REPAIR SHEET. SCIE DE TABLE RIDGID DE 10 po (254 mm) MODÈLE TS3660 FEUILLE DE RÉPARATION
RIDGID 0 in. TABLE SAW MODEL NO. TS0 REPAIR SHEET SCIE DE TABLE RIDGID DE 0 po ( mm) MODÈLE TS0 FEUILLE DE RÉPARATION SIERRA DE MESA RIDGID DE 0 pulg. ( mm) MODELO NÚM. TS0 LISTAS DE PIEZAS DE REPUESTO
More information8¼ COMPOUND MITER SAW
36-040 8¼ COMPOUND MITER SAW MB-2 PART NO. 899994 Revised: 05/23/2001 Page1/ MB-2/DEB Ref. REPLACEMENT PARTS No. Part No. Description 1 36-040 SPECIAL SCREW 2 904-01-010-1605 3/8" FLAT WASHER 3 1343275
More informationSPARE PARTS LIST PAGE 1
PAGE 1 001 JM23300009 HEX BOLT M8X16 2 002 JM23300010 SPRING WASHER 8 2 003 JM23300011 FLAT WASHER 8 2 004 JM23300012 RIVING KNIFE 1 005 JM23300013 PAN HEAD SCREW M6X16 1 006 JM23300300 UP BLADE GUARD
More informationFIGURE A R
FIGURE A 8 7 78 7 8 0 9 7 70 7 8 78 78 9 0 8 7 0 9 7 8 8 9 8 7 0 9 7 0 7 0 9 8 9 7 7 7 7 77 R007 PARTS LIST FOR FIGURE A KEY P/N DESCRIPTION QTY KEY P/N DESCRIPTION QTY 0800090079 Miter Guide Assembly
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E937 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 12 15 (E2) 1 625 5 624 626 627 628 4 6 22 23 24 25 629 630 7A 8 36 37 9 11 10 12 13 2 14 3 15 16 17 18 19 20 21 26 27 28 29
More informationRIDGID. 6-1/8 in. (156 mm) JOINTER/PLANER MODEL NO. JP06101 REPAIR SHEET
RIDGID -1/ in. ( mm) JOINTER/PLANER MODEL NO. JP01 REPAIR SHEET FIGURE A 1 0 0 1 1 1 1 1 1 1 1 0 1 0 The model number will be found on a plate attached to the motor housing. Always mention the model number
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E944 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 73 1 14 1 2 3 4 5 6 7 11 8 9 10 30 30 12 13 17 18 12 14 31 19 15 16 32 33 20 21 22 23 34 35 A 24 25 26 38
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E938 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 10 1 (E1) 80 1 15 7 8 9 16 17 18 1 2 3 19 4 20 5 12 6 13 14 13 15 21 11 10 39 40 41 42 43 44 45 46 47 31 38 32 22 33 23 34
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E943 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 83 1 14 1 2 3 4 5 6 7 11 8 9 10 39 39 12 13 19 20 12 14 40 21 15 16 41 42 22 23 24 25 17 18 43 44 37 38 A
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E942 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND MITER SAW Model 2005 5 20 (E1) 1 2 3 60 61 62 63 64 19 20 21 A 65 47 48 45 49 50 51 6 17 37 46 38 44 23 24 22 25 24 A 26 27 39 28 40
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E945 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2006 10 11 (E1) 1 2 602 603 4 5 6 7 3 8 9 10 11 12 22 23 24 25 26 601 30 31 32 33 604 605 606 607 608 628 601 609 13 14 15 16 17
More informationDW A Motor MITRE SAW 1
DW718-----A Motor MITRE SAW 1 DW718-----A Table MITRE SAW 1 1 618175-01 1 ARM ASSEMBLY No GB 1 618175-01 1 ARM ASSEMBLY No LX 1 618175-01 1 ARM ASSEMBLY No QS 1 618175-00 1 ARM No XE 2 618193-00 1 BELT
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E946 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2006 10 11 (E1) 602 603 4 5 6 7 3 8 9 10 11 12 22 23 24 25 26 601 30 31 32 33 604 605 606 607 608 628 13 14 15 16 39 18 19 21 27
More informationCS-4K L31, 36-L31X, 36-L51, 36-L51X, 36-L51L, & 36-L53L UNISAW 10 LEFT TILTING ARBOR SAW. PARTS NO Date: 04/17/03
36-L31, 36-L31X, 36-L51, 36-L51X, UNISAW 10 LEFT TILTING ARBOR SAW CS-4K-17-2 PARTS NO. 422-40-651-0019 Date: 04/17/03 Page1/ CS-4K-17-2/DEB REPLACEMENT PARTS * 34-895 MITER GAGE, CONST OF: 1 422-02-074-0001
More informationCS-4Q-7-A TS200, TS200LS 10 BENCH SAW. PART NO Dated: Page1/ CS-4Q-7A /DEB
TS200, TS200LS 10 BENCH SAW CS-4Q-7-A PART NO. 905598 Dated: 04-19-04 Page1/ CS-4Q-7A /DEB REPLACEMENT PARTS * 900221 FENCE ASSY, CONST OF; 1 899956 FENCE 2 1246013 M6 X 12MM HEX HEAD SCREW 3 1313361 6.4MM
More informationPARTS LIST. Clarke CTS10PLM 10 Table Saw Part Number:
PARTS LIST Clarke CTS10PLM 10 Table Saw Part Number: 6500741 Mitre Gauge Assembly 1 Mitre Gauge Knob NW303169-000 1 Mitre Gauge Body NW303169-000 1 Plastic Washer NW303169-000 1 Panhead Screw NW303169-000
More information2" (50MM) ROTARY HAMMER
" (50MM) ROTARY HAMMER MODEL HR5000 05-03 75 7 70 80 39 3 4 5 6 7 8 63 58 59 60 6 57 56 55 54 3 53 5 5 4 5 6 7 8 9 0 3 4 4 4 43 44 45 46 47 48 49 50 38 37 40 5 6 7 36 35 34 33 3 3 8 9 30 99 84 85 83 8
More informationELECTRIC TOOL PARTS LIST
ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model LIST E925 2001 9 14 (E2) - 2 - - 3 - - 4 - PARTS CODE DESCRIPTION 1 949-258 MACHINE SCREW M6X20 (10 PCS.) 6 2 998-818 TABLE INSERT 2 3 949-215 MACHINE
More informationCS-4U PART NO Dated:
36-650 10 PROFESSIONAL TABLE SAW CS-4U PART NO. 902112 Dated: 10-18-04 Page1/ CS-4U /DEB REPLACEMENT PARTS * 1344973 BLADE GUARD ASSY, INCL.: 1 1313270 PUSH NUT 2 1313271 PIN 3 1344974 "SEE THRU" GUARD
More informationMODEL HM A01
BREAKER HAMMER MODEL HM800 06-03 5 4 3 2 0 9 8 7 6 5 4 3 2 6 7 8 36 35 32 3 30 9 20 25 26 24 23 22 2 29 28 27 57 56 55 54 53 52 5 50 49 48 47 46 45 44 43 42 39 4 40 4 38 37 34 33 2 3 A0 23 2 Model HM800
More informationClassic12 Belt Sander
Classic12 Belt Sander Section II Parts and Service Manual AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual Page 21 Assembly Drawing #1 11/00 7 8 9 12 13 11 1 10 85 14 6 81 80 79 76
More informationR4040/R4040S FIGURE A / FIGURA A
R00/R00S FIGURE A / FIGURA A 0 0 0 0 0 0 0 0 R00/R00S FIGURE A KEY P/N DESCRIPTION QTY KEY P/N DESCRIPTION QTY KEY P/N DESCRIPTION QTY 0000 Screw (M)... 0000 Splash Guard... 0000 Outer Blade Guard... 0000
More information10" TABLE SAW Model
April 2001 INDUSTRIAL 10" TABLE SAW Model 06014739 4000 Open for Tool Illustration Pos. Part Number Description {Qty} F/C Pos. Part Number Description {Qty} F/C 1 2 0 996 864 Motor Housing 71 2 2 0 996
More informationrev 1_ XML02
1 DECK, MOTOR, BLADE 2 1 DECK, MOTOR, BLADE 1 1 273675-0 GRIP A 1 1 2 266459-3 TAPPING SCREW 5X25 2 1 3 453250-0 LOCK LEVER 1 1 4 453251-8 LOCK LEVER SUPPORT 1 1 5 233173-6 COMPRESSION SPRING 4 1 1 6 144077-6
More informationMK-101 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below.
More informationDW017 Mitre Saw TYPE 1. January 2003 S. Hurt. Exploded Drawing. Bill Of Material. Repair Instructions. Special Instructions.
DW017 Mitre Saw TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions Special Instructions E13442 E13443 DW017-----A R11368 New Parts Wiring Diagram Main Menu 22 January 2003 S. Hurt
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationSCROLL SAW SS-10 PART NO DATE:
40-680 20 SCROLL SAW SS-10 PART NO. 1342406 DATE: 06-09-04 Page1/ SS-10/DEB REPLACEMENT PARTS 1 n 901-02-050-5634 6-32 X 1/2" ROUND HD SCREW 2 1342281 WEDGE 3 1342285 UPPER BRACKET 4 1342261 BUSHING 5
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationRAS-5E PART NO Date: 04/08/02
33-400, 33-401, 33-402, 33-403 14 RADIAL SAWS 33-410, 33-411, 33-412, 33-413 16 RADIAL SAWS 33-420, 33-421, 33-422, 33-423 18 RADIAL SAWS RAS-5E PART NO. 424-03-651-0018 Date: 04/08/02 Page1/ RAS-5E /DEB
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationiq360xr - Dust Control Chop Saw Parts Manual 1 iq360xr 004 PM1218
iq360xr - Dust Control Chop Saw Parts Manual 1 iq360xr 004 PM1218 CUTTING HEAD 60 17 16 15 57 31 54 56.3 55 62 56.1 53 19 61 56.2 2 CUTTING HEAD ASSEMBLY/ ITEM NO. KIT / SET QTY PART NO. DESCRIPTION 60
More informationrev 2_07/17/17 EN5950SH MH-246.4DS
1 Shaft, Handle 16 9 7 1 8 6 38 11 15 10 3 2 218 4 37 A04 2 1 Shaft, Handle 1 1 195626-2 LOOP HANDLE SET 1 1 INC. 6-9,16 1 2 326036-4 SHAFT 1 1 1 3 142145-9 SHAFT PIPE COMPLETE 1 1 1 4 126281-9 TRIMMER
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS METAL CUTTING SAW SERIAL NUMBER
22-64-0437 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CATALOG NO. METAL CUTTING SAW 6370-20 SERIAL NUMBER A35C BULLETIN NO. 54-40-1627 REVISED BULLETIN DATE 54-40-1626 Sept.
More informationRepair Parts Parts List for 13" Thickness Planer Model No. TP13001
Parts List for " Thickness Planer Model. TP00 Figure 0 Always order by Part Number - t by Number.. 0 00-0 0 0 - - 0- Cord w/plug * Screw Pan Hd M x 0.-0 Housing Switch Gasket Foam Motor (Includes Brushes)
More informationRAS-3D PART NO Dated:
33-890, 33-891,33-892, 33-894, & 33-895X 12 RADIAL ARM SAW RAS-3D PART NO. 424-02-651-0024 Dated: 08-10-04 Page1/ RAS-3D /DEB REPLACEMENT PARTS 1 901-02-010-7562 10-32 X 5/16" ROUND HD SCREW 2 424-02-031-0030
More informationMain Components. Drain Cleaning Machine K Printed in U.S.A. Ridge Tool Company Elyria, Ohio, U.S.A.
K-00 Main Components 0 00 Standard Drum Assembly 00 Sink Drum Assembly 00 Powerfeed Assembly 0 Retaining Knob () Roll Pin / - / 0 Plunger Pin 0 Wear Plug Yoke Bearing Clamp 0 Screw / - 0 x / () Pivot Pin
More informationSpindle Components. Pipe Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
0 Spindle Components 0 Centering Jaw Set 0 Centering Head Centering Scroll 00 Roll Pin / x / () Retaining Ring Rear Spindle Bearing Front Spindle Bearing Drive Shaft Spacer Ring 0 0 Hand Wheel Scroll Jaw
More informationSpindle Components. Pipe Threading Machine Ridge Tool Company/Elyria, Ohio, U.S.A. 123
Pipe Threading Machine 0 Spindle Components 0 Centering Jaw Set 0 Centering Head Centering Scroll 00 Roll Pin /" x /" () Retaining Ring 0 Rear Spindle Bearing 0 Front Spindle Bearing Drive Shaft Spacer
More informationFloorCrafter Belt Sander
FloorCrafter Belt Sander Section II Parts and Service Manual (0255B-DE) U.S. Patent No. 5,55,0 and No. 6,58,858 Clarke American Sanders FloorCrafter Bedienungshandbuch Page 2 FloorCrafter Main Assembly
More information53cm Recycler Rear Bagger Walk Power Lawn Mower
Form No. 3327 713 53cm Recycler Rear Bagger Walk Power Lawn Mower Model No. 20789 210000001 and Up Model No. 20791 210000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts,
More informationrev 6_05/23/18 EN7350SH
1 Shaft, Handle 16 9 7 1 8 6 38 11 15 10 3 2 218 4 A04 37 2 1 Shaft, Handle 1 1 195626-2 LOOP HANDLE SET 1 INC. 6-9,16 1 2 326036-4 SHAFT 1 1 6 346467-1 CLAMP 24 1 1 7 346468-9 CLAMP 33 1 1 8 452841-4
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationPARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG
PARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG CONTROL PANEL ASSEMBLY 101 1394151 ROUND POWER SWITCH 1 102 0693141 RUBBER SWITCH BOOT 2 103 9122465.516 I.D. X.813 O.D. X.027/.030 THICK FLAT
More informationrev 6_07/17/17 EN4950H
1 Shaft, Handle C40 C30 C20 A03 C50 C10 4 38 5 8 222 6 37 9 3 218 1 A04 2 1 Shaft, Handle 1 1 135683-8 TRIMMER HEAD ASS Y 1 1 1 126303-5 TRIMMER HEAD ASS Y 1 1 3 324893-4 SHAFT 1 1 4 195143-2 HANGER SET
More informationRK-33 BRUSH CUTTER - FIG 1
BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 2 BRUSH CUTTER - FIG 3 BRUSH CUTTER - FIG 1 150 2090198 ANGLE TRANSMISSION 73.38 150-1 2820020 GEAR HOUSING 10.69 150-2 2200029 SPIRAL BEVEL GEAR 7.05 150-3 2200028
More informationHMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant
0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33
More information& X 6 PROFESSIONAL JOINTER J-2I PART NO DATE:
37-195 & 37-275X 6 PROFESSIONAL JOINTER J-2I PART NO. 909996 DATE: 09-13-04 Page1/ J-2I /DEB REPLACEMENT PARTS * 737191 CUTTERHEAD ASSY, INCL: 1 1340195 BAR 2 37-658 KNIVES (SET OF 3) 3 1340196 KNIFE SCREW
More information28-216, & A 14 WOOD CUTTING BAND SAW BS-2G-1C PART NO Date: 06/19/02
28-216, 28-241 & 28-299A 14 WOOD CUTTING BAND SAW BS-2G-1C PART NO. 426-02-651-0050 Date: 06/19/02 Page1/ BS-2G-1C /DEB REPLACEMENT PARTS 1 426-02-354-0049 UPPER GUARD-FRONT 2 406-03-060-0002 KNOB 3 426-02-071-0002
More informationWRANGLER 1708CE, 2008CE
WRANGLER 1708CE, 2008CE CONTROL PANEL ASSEMBLY ITEM PART NO. DESCRIPTION QTY. 101 5490161 FULLY INSULATED FEMALE TERMINAL 14-16 2 102 0693141 RUBBER SWITCH BOOT 2 103 0691851 1/2 INTERNAL STAR LOCK WASHER
More informationAFM-14 PART NO Revised: 10/9/01
31-278 & 31-280 6 BELT/12 DISC SANDING CENTER AFM-14 PART NO. 406-12-651-0005 Revised: 10/9/01 Page1/AFM-14/DEB 1 406-12-031-0001 UPPER IDLER COVER 2 406-12-138-0001 KNOB 3 406-12-020-0001 END CAP * 406-12-362-0003
More information136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck
136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299661 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationWRANGLER 1708AB, 2008AB
WRANGLER 1708AB, 2008AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY. 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271
More information21in Heavy-Duty Walk Behind Rotary Mower
21in Heavy-Duty Walk Behind Rotary Mower Code 455E Serial No.310000001 Manual Part No. 3364-825 Rev A Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity,
More informationTILT COMMODE September 16, 2011
PARTS CATALOG REV. 09/2011 TILT COMMODE September 16, 2011 TABLE OF CONTENTS 1 GENERAL VIEW 2 FRAME 3 CASTERS 4 RIGGINGS AND FOOTPLATES 5 TILTING HARDWARE 6 BACK SUPPORT 7 ARMRESTS 8 HEADREST 9 ANTI-TIPPERS
More informationBS-2G-1D PART NO Date:
28-248, 28-248F, 28-248G, & 28-475X 14 WOOD CUTTING BAND SAW BS-2G-1D PART NO. 426-02-651-0061 Date: 08-31-04 Page1/ BS-2G-1D /DEB REPLACEMENT PARTS 1 426-02-354-0049 UPPER GUARD 2 406-03-060-0002 KNOB,
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
More information6,000 Watt Generator Item No. PS906025PA Mfg. No Replacement Parts List
6,000 Watt Generator Item No. PS0605PA Mfg. No. 0006 Replacement Parts List 00066 --5 (Rev:0) OWT INDUSTRIES, INC. P.O. Box 5, Highway Pickens, SC 6 --6-50 POWERSTROKE GENERATOR PS0605PA 5 5 5 5 6 6 66
More informationPARTS MANUAL. RGD5000 Generator. Model. PUB-GP1204 Rev. 7/98
PARTS MANUAL Model RGD5000 Generator PUB-GP1204 Rev. 7/98 GROUP INDEX Group Name Page GENERATOR GROUP... 4 FRAME and FUEL TANK GROUP... 6 CONTROL BOX GROUP... 8 CRANKCASE GROUP... 12 CYLINDER and CYLINDER
More informationSECTION 9: PARTS Main Parts
SECTION 9: PARTS Main Parts 8 3 6 2 1 27 34 33 30 31 32 171 37 38 173 109 110 17 18 22 23 21 36 39 159 44-1 44 158 42 43 15-1 141 142 143 140 157 45 46 47 145 160147 49 50 153 154 41 164 99 28 100 104
More informationAdvolution 2710 PARTS LIST MODELS , , /06 revised 5/09 FORM NO
PARTS LIST MODELS 56422000, 56422002, 56422184 3/06 revised 5/09 06-3 09-5 TABLE OF CONTENTS 1 DESCRIPTION PAGE Body System... 2-3 Chassis System... 4-5 Decal System... 6-7 Electrical System... 8-9 Pad
More informationHC-300. Main Components. Hole Cutting Tool. NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number.
Main Components 0 0 0 0 Cap 0 Pin Washer 0 Compression Spring Pivot Pin 0 Roller Pin 00 Roller Soc. Hd. Cap Screw, /" - 0 x /" Plunger Stop 0 0 Compression Spring () 0 Post Assembly (Incls. Refs.,,, )
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationMUSTANG 1500 BURNISHER
PARTS LIST MUSTANG 1500 BURNISHER NON-VAC-TRAC VAC-TRAC HANDLE ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5990189 COMPLETE HANDLE ASSEMBLY - 120 VOLT 1 5990199 COMPLETE HANDLE ASSEMBLY - 240 VOLT 1 101
More information28-216, & A 14 WOOD CUTTING BAND SAW BS-2G-1C PART NO Date:
28-216, 28-241 & 28-299A 14 WOOD CUTTING BAND SAW BS-2G-1C PART NO. 426-02-651-0050 Date: 07-13-04 Page1/ BS-2G-1C /DEB REPLACEMENT PARTS 1 426-02-354-0049 UPPER GUARD-FRONT 2 406-03-060-0002 KNOB 3 426-02-071-0002
More informationMain Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
More informationELECTRIC HYDRAULIC PUMP
Parts List for: Form No. 1000048 PE55TWP PE55TWP-220 MODEL D ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI See Back Sheet 5 of 8 1 13 2,3 11 OFF ON WARNING 6 4,5 0IL 7 VALVE DETAIL TORQUE SPOOL
More information17 in. Gas Trimmer - Curved Shaft
Form No. 78-7 Rev. A 17 in. Gas Trimmer - Curved Shaft Item No. 198 1000001 & Up Manufacturing No. 09009019 Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part
More informationWorldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number:
Parts Catalog R WYRZ46S/50U/60U Residential Zero Turn Mower Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE 68310 Toll Free Number: 1-800-267-4255 Table of Contents Table
More informationRYOBI Digital Inverter Generator Manufacturing No Item No. RYi2200GR Replacement Parts List
RYOBI Digital Inverter Generator Manufacturing No. 09090 Item No. RYi00GR Replacement Parts List 99500009 7-6-7 (Rev:0) TECHTRONIC INDUSTRIES POWER EQUIPMENT, INC. 8 Pearman Dairy Road, Anderson, SC 965
More informationNOTE: Order parts by Catalog Number Only. DO NOT order by Reference Number.
K-C/K-R Cage Machine Transportation Cart Assembly 0 NOTE: Order parts by Catalog Number Only. Ref. No. 0 Catalog No. 00 000 0 0 0 0 0 00 0 0 0 0 0 Description Cart Assembly Hex Nut /" () Lock Washer /"
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationSuper 7R Edger. Parts and Service Manual. Section II (78155C) Clarke American Sanders Super 7R Operator's Manual Page 9
Super 7R Edger Section II Parts and Service Manual (78155C) Clarke American Sanders Super 7R Operator's Manual Page 9 MAINTENANCE Maintenance and repairs performed by unauthorized personnel could result
More informationFORM NO Recycler /Rear Bagging. Walk Behind Mower. Model No & Up. Parts Catalog
FORM NO. 3322 771 21 Recycler /Rear Bagging Walk Behind Mower Model No. 20027 9900001 & Up Parts Catalog 3322 771 ORDERING REPLACEMENT PARTS To order replacement parts, please supply: the part number,
More informationWalk-Behind Lawn Mowers
Walk-Behind Lawn Mowers Parts Manual Models 171 LM21 16 LM21S 17 LM21SW 04502100 / Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.
More information