TILT COMMODE September 16, 2011

Transcription

1 PARTS CATALOG

2

3 REV. 09/2011 TILT COMMODE September 16, 2011 TABLE OF CONTENTS 1 GENERAL VIEW 2 FRAME 3 CASTERS 4 RIGGINGS AND FOOTPLATES 5 TILTING HARDWARE 6 BACK SUPPORT 7 ARMRESTS 8 HEADREST 9 ANTI-TIPPERS 10 SEAT AND PAN

4

5 REV. 09/2011 TILT COMMODE September 16, 2011 GENERAL VIEW 1 GENERAL VIEW TILT COMMODE 1 LOWER FRAME 2 SEAT FRAME 3 CASTERS 4 SWINGAWAYS 5 FOOTPLATE RIGHT 6 FOOTPLATE LEFT BLOCK-O-LIFT GAS CYLINDER 7 200N 80MM STROKE 8 STABILUS ACTUATOR HEAVY STROLLER TRIGGER HANDLE 9 ASSEMBLY 10 BACK SUPPORT 11 ARMRESTS 12 ANTI-TIPPERS 13 HEADREST 14 FORMED WIRE POTTY HOLDER WELDMENT 15 POTTY INJECTED 16 SEAT

6

7 REV. 09/2011 TILT COMMODE September 16, 2011 FRAME 2 FRAME FRAME 1 2 QTY PART SEE BELOW SEE BELOW LOWER FRAME WELDMENT SEAT FRAME WELDMENT TILT LIMITING BAR MAIN PIVOT INSERT BRASS BUSHING SCREW, SOC HD CAP,1/4-20 X SCREW, SOC BUTTON HEAD,1/4-20 X

8 September 16, 2011 FRAME TILT COMMODE REV. 09/2011 LOWER FRAME WELDMENT SEAT WIDTH PART LOWER FRAME WELDMENT LOWER FRAME WELDMENT LOWER FRAME WELDMENT LOWER FRAME WELDMENT 22 SEAT FRAME WELDMENT SEAT PART DEPTH SEAT FRAME WELDMENT SEAT FRAME WELDMENT SEAT FRAME WELDMENT SEAT FRAME WELDMENT , ,

9 REV. 09/2011 TILT COMMODE September 16, 2011 CASTERS 3 CASTERS 5 X 2 TOTAL LOCK HEIGHT ADJUSTABLE PROPYLENE CASTERS PART TOTAL LOCK POLYPROPYLENE CASTER SNAP CLIP SEAT TO FLOOR HEIGHT STF CASTER STEM HOLE 20 C B 21.5 A PART QTY X 2 POLYPROPYLENE TOTAL LOSK CASTER COMMODE CASTER SS STEM TOTAL LOCK COMMODE CASTER

10

11 REV. 09/2011 TILT COMMODE September 16, 2011 RIGGINGS AND FOOTPLATES 4 RIGGINGS AND FOOTPLATES 60 DEGREE SWING AWAY WITH COMPOSITE FLIP-UP FOOTPLATES NO QTY PART DEFREES SWINGAWAY WELDMENT U-TUBE COMPOSITE FLIP-UP ASSEMBLY RIGHT COMPOSITE FLIP-UP ASSEMBLY LEFT NYLINER BUSHING 1.00 ID LG DEGREE SWINGAWAY NO QTY PART DEFREES SWINGAWAY WELDMENT U-TUBE GLIDE BUSHING,1.00 TO 0.75 (0.083) WALL DEGRESS SWINGAWAY

12 September 16, 2011 RIGGINGS AND FOOTPLATES TILT COMMODE FOOTPLATE ASSEMBLY LEFT REV. 09/2011 COMPOSITE FLIP-UP FOOTPLATES FOOTPLATE ASSEMBLY RIGHT NO QTY PART FOOTPLATE, FLIP-UP, COMPOSITE MEDIUM FOOTREST ADJUSTABLE STEM LOCKING SLUG /4 ROUND UNIVERSAL END PLUG 3/4" DIA TUBE COVED SPACER PLASTIC SPACER, COVED ¼ X 1.0 DIA SCREW, SOCKET HEAD CAP, 1/4-20 X 2 1/ BOLT HEX ¼-20 X NUT, HEX, NYLOCK 1/4-20NC COMPOSITE FLIP-UP ASSEMBLY RIGHT COMPOSITE FLIP-UP ASSEMBLY LEFT , ,

13 REV. 09/2011 TILT COMMODE September 16, 2011 TILTING HARDWARE 5 TILTING HARDWARE TILTING HARDWARE FOR 17 AND 20 SEAT WIDTH * *-TILT ANGLE 3 TO

14 September 16, 2011 TILTING HARDWARE TILT COMMODE REV. 09/2011 TILTING HARDWARE QTY QTY FOR 22 SEAT WIDTH PART BLOCK-O-LIFT GAS CYLINDER 200M 80MM STROKE STABILUS ACTUATOR HEAVY STROLLER TRIGGER HANDLE ASS'Y CABLE RETAINER TUBE SPACER -5/16 BOLT 1.45 LG SPACER -5/16 BOLT.70 LG SS HEX BOLT 5/16 X 4.5 WASHER.625 OD X 11/32 ID X.063 5/16-18 NYLON INSERT LOCKNUT BL. ZINC NUT, HEX, NYLOCK 1/4-20 NC , ,

15 REV. 09/2011 TILT COMMODE September 16, 2011 BACK HEADREST SUPPORT 6 BACK SUPPORT BACK SUPPORT WITH STROLLER HANDLES PUSH OPTION QTY PART 1 1 SEE BELOW BACK SUPPORT ASSEMBLY SNAP CLIP ¾ DIA TUBE PVC HOSE ID ½ OD ¾ ROUND UNIVERSAL END PLUG

16 September 16, 2011 BACK SUPPORT TILT COMMODE REV. 09/2011 SCREW ON FOAM SKINNED BACK SUPPORT PART QTY. 1 1 SEE BELOW BACK FRAME WELDMENT BACK SUPPORT OVERMOLD FOAM SKINNED SCREW, SOC BUTTON HEAD ¼-20 X ½ BACK SUPPORT ASSEMBLY SEAT PART WIDTH BACK FRAME WELDMENT - LOW 14 WIDE BACK FRAME WELDMENT - LOW 17 WIDE BACK FRAME WELDMENT - HIGH 17 WIDE BACK FRAME WELDMENT - LOW 20 WIDE BACK FRAME WELDMENT - LOW 22 WIDE , ,

17 REV. 09/2011 TILT COMMODE September 16, 2011 BACK HEADREST SUPPORT MESH BACK SUPPORT WITH TENSION ADJUSTMENT SLING BACK FRAME WELDMENT SEAT PART WIDTH SLING BACK FRAME WELDMENT HI 14 WIDE SLING BACK FRAME WELDMENT - HI 17 WIDE SLING BACK FRAME WELDMENT - HI 20 WIDE SLING BACK FRAME WELDMENT - HI 22 WIDE SEAT PART WIDTH SLING BACK FRAME WELDMENT - LOW 17 WIDE SLING BACK FRAME WELDMENT - LOW 20 WIDE SLING BACK FRAME WELDMENT - LOW 22 WIDE

18 September 16, 2011 BACK SUPPORT TILT COMMODE REV. 09/2011 MESH BACK SUPPORT WITH TENSION ADJUSTMENT SEAT PART WIDTH 14 MESH BACK WITH TENSION ADJUSTMENT HI 14 WIDE 17 MESH BACK WITH TENSION ADJUSTMENT - HI 17 WIDE 20 MESH BACK WITH TENSION ADJUSTMENT - HI 20 WIDE 22 MESH BACK WITH TENSION ADJUSTMENT - HI 22 WIDE SEAT PART WIDTH 17 MESH BACK WITH TENSION ADJUSTMENT- LOW 17 WIDE 20 MESH BACK WITH TENSION ADJUSTMENT- LOW 20 WIDE 22 MESH BACK WITH TENSION ADJUSTMENT- LOW 22 WIDE , ,

19 REV. 09/2011 TILT COMMODE September 16, 2011 ARMRESTS HEADREST 7 ARMRESTS FLIP-UP FIXED HEIGHT ARMREST PART QTY ARMREST TOP ASSEMBLY RIGHT ARMREST TOP ASSEMBLY LEFT ARMREST BASE ARMREST LOVER MOUNT PIVOT SCREW SOC HEAD BUTTON, 1/4-20 X 1.25 ARMREST INSERT BRASS BUSHING TOP SREW, SOC BUTTON HEAD ¼-20 X ½ MOUNTING HARDWARE KIT FOR FLIP-UP ARMREST

20 September 16, 2011 ARMREST TILT COMMODE REV. 09/2011 ARMREST TOP ASSEMBLY LEFT ARMREST TOP ASSEMBLY RIGHT QTY PART ARMPAD WITH INSERT RT ARMPAD WITH INSERT LT ARMTOP TUBE WELDMENT /8 ROUND UNIVERSAL END PLUG ARMREST INSERT BRASS BUSHING TOP SREW, SOC BUTTON HEAD ¼-20 X ½ SCREW, SOCKET HEAD CAP, 10-32NF X 5/ ARMREST TOP ASSEMBLY RT ARMREST TOP ASSEMBLY LT , ,

21 REV. 09/2011 TILT COMMODE September 16, 2011 ARMRESTS HEADREST ARMREST SUPPORT QTY PART ARMREST OUTER TUBE WITH INSERT ARMREST INNER TUBE WITH INSERT ARMREST THREADED INSERT STUD WASHER SS 0.75 OD X ID X 14 GAUGE ARM REST SUPPORT

22

23 REV. 09/2011 TILT COMMODE September 16, 2011 HEADREST 8 HEADREST HEADREST

24 September 16, 2011 HEADREST TILT COMMODE REV. 09/2011 HEADREST QTY. PART FOAM SKINNED HEADREST HJ SPACER PLATE, BALL SOCKET CLAMP SS BALL-JOINT, 1'' DIA FACE PLATE, BALL SOCKET CLAMP HEADREST CURVED STEM WELDMENT MAIN LOCK COLLAR HOUSING T-HANDLE ROUNDED SNAP CLIP.875 DIA PLUG, UNIVERSAL BLACK ROUND PIVOT BUSHING, UPPER CLAMP SCREW, SOCKET HEAD BUTTON 5/16-18 X 0.5 SCREW, SOCKET HEAD BUTTON 1/4-20 X 1.50 SCREW, SOCKET HEAD CAP,10-32NFX 3/4 SCREW, SOCKET HEAD CAP, 10-32NF X 5/8 HEADREST STRAIGHT STEM WELDMENT ADJUSTABLE HEADREST ASSEMBLY , ,

25 REV. 09/2011 TILT COMMODE September 16, 2011 ANTI-TIPPERS 9 ANTI-TIPPERS ANTI-TIPPERS PART ANTI-TIP ASSEMBLY KNOB ASS, HEX STUD, 1/

26 September 16, 2011 ANTI-TIPPERS TILT COMMODE REV. 09/2011 ANTI-TIPPERS QTY. 1 1 PART SHORT TUBE MEDIUM TUBE LONG TUBE WHEEL, ANTI-TIP NUT, HEX NYLOCK #10-32 NF, BL SCREW, SOCKET HD BUTTON, #10-32 X1.75 BLACK ANTI-TIP GEN ASSEMBLY , ,

27 REV. 09/2011 TILT COMMODE September 16, 2011 SEAT PAN 10 SEAT PAN SEAT PAN QTY PART 1 1 SEE BELOW SEAT ASSEMBLY WITH CLIPS REF FORMED WIRE POTTY HOLDER WELDMENT POTTY INJECTED RUBBER GROMMET ID ALLIANCE PLASTICS #GR

28 September 16, 2011 SEAT PAN TILT COMMODE REV. 09/2011 SEAT PAD ASSEMBLY QTY. 1 1 PART SEE BELOW SEAT WITH UPHOLSTERY REF SEAT LOCKING CLIP SEE BELOW COMMODE SEAT HOLDING CLAMP S.S QUICK RELEASE PIN W/O SHOULDER PLASITC LANYARD 6" LG X.260 EYELIT SCREW ¼-20 X ¾ BUTTON SOC HEAD S.S. SEAT ASSEMBLY WITH CLIPS PART NO 1-3 SEAT ASSEMBLY WITH CLIPS 1 SEAT WITH UPHOLSTERY 1-3 SEAT ASSEMBLY WITH CLIPS 1 SEAT WITH UPHOLSTERY 1-3 SEAT ASSEMBLY WITH CLIPS 1 SEAT WITH UPHOLSTERY SEAT WIDTH , ,

29 REV. 09/2011 TILT COMMODE September 16, 2011 SEAT PAN POTTY INJECTED PART POTTY LID WIRE HANDLE COMMODE POTTY

30

31 REV. 09/2011 TILT COMMODE September 16, 2011 TABLE OF CONTENTS 1 GENERAL VIEW 2 FRAME 3 CASTERS 4 RIGGINGS AND FOOTPLATES 5 TILTING HARDWARE 6 BACK SUPPORT 7 ARMRESTS 8 HEADREST 9 ANTI-TIPPERS 10 SEAT AND PAN , ,