NEW! Description CTT 200 CTT 210 CTT 230 CTT 300 Ecostretch - Pre-stretch - 3 gears, up to 235% 8 gears, up to 300% 8 gears, up to 400%

Transcription

1 Cyklop Teknik Machine Program 2018

2 SEMI AUTOMATIC TURNTABLE Wraps irregular shaped loads. Uses forklift / palletjack to load stretch wrapper. Operator starts wrap cycle at machine. Operator manually cuts / attaches film. Description CTT 200 CTT 210 CTT 230 CTT 300 Ecostretch - Pre-stretch - 3 gears, up to 235% 8 gears, up to 300% 8 gears, up to 400% Table / Arm speed Up to 12 rpm Soft start and soft run-down. Up to 15 rpm Soft start and soft run-down. Table size (Option) Ø 1650 mm ( Ø 1800 mm, Ø 2200 mm ) Film tension Adjustable, friction brake Fixed Adjustable Programs 5 standard 5 standard, 1 option 4 standard 9 fully adjustable Top wraps 1-7 (Prog 3: 2-14) 1-15 Bottom wraps 1-7 (Prog 3: 2-14) 1-15 Max size (length x width) Option 1 5 C (40 F) to 35 C (95 F) for use in a dry, tempered area x 1000 mm 1400 x 1400 mm Ø 2200 table 1600 x 1200 mm Ø 2200 table Min height incl. pallet Max height incl. pallet (standard machine) 2200 mm Option up to 3000 mm Permitted load weight 2000 Kg Controller Allen-Bradley PLC Control voltage: 24 V Supply Single phase 240V, 50 Hz Loading 10 A IP code IP54 Stretch film Film width, max Film thickness 9-35 μm (my) Diameter, core 76 mm Outer diameter, max 250 mm Selected options - Access ramp 3-way adjustable - String roller - Galvanized chassis - Roller conveyor, non powered - Weighing system - Low temperature: -6º /-28º - Button cover - Access ramp 3-way adjustable - Top plate - String roller - Galvanized chassis - Roller conveyor, non powered - Weighing system - Cutting unit - Low temperature: -6º /-28º - Button cover 1) With options Ø2200 table & extended chassis. 2 EN

3 SEMI AUTOMATIC HS TURNTABLE Wraps irregular shaped loads. Uses forklift / palletjack to load stretch wrapper. Operator starts wrap cycle at machine. Operator manually cuts / attaches film. Description CTT 210 HS CTT 230 HS CTT 300 HS Ecostretch Pre-stretch 3 gears, up to 235% 8 gears, up to 300% 8 gears, up to 400% Table / Arm speed Up to 12rpm Soft start and soft run-down. Up to 15 rpm Soft start and soft run-down. Table size Ø 1650 mm Film tension Fixed Adjustable Programs 5 standard, 1 option 4 standard 9 fully adjustable Top wraps 1-7 (Prog 3: 2-14) 1-15 Bottom wraps 1-7 (Prog 3: 2-14) C (40 F) to 35 C (95 F) for use in a dry, tempered area. Max size (length x width) 1200 x 1000 mm Min height incl. pallet Max height incl. pallet (standard machine) Permitted load weight 2200 mm Option up to 3000 mm 1500 Kg Controller Allen-Bradley PLC Control voltage 24 V Supply Single phase 240V, 50 Hz Loading 10 A IP code IP54 Stretch film Film width, max Film thickness 9-35 μm (my) Diameter, core 76 mm Outer diameter, max 250 mm Selected options - Top plate - String roller - Button cover - Cutting unit 3 EN

4 SEMI AUTOMATIC ARM A reliable, rigid and cost efficient machine The rotary arm machine is a floor mounted stretch wrapper. Description CTA 215 CTA 300 Ecostretch Pre stretch Up to 300% Up to 400% Arm speed Frequency-controlled up to 10,5 rpm. Soft start and soft run-down. Frequency-controlled up to 10,5 rpm. Soft start and soft run-down. Film tension Adjustable Programs 5 9 Top / bottom wraps 1-9 / / 1-9 Elevator speed Adjustable 5 C (40 F) to 35 C (95 F) for use in a dry, tempered area. Max size (length x width) x 1200 mm Min height incl. pallet: Max height incl. pallet (standard machine): Pallet weight (Max): Controller 2400 mm Option up to 3000 mm n.a. Allen-Bradley PLC Control voltage: 24 V Supply 230 / 400V, 3-phase + N + PE, 50Hz Loading 10 A IP code IP54 Stretch film Film width, max 500 Film thickness 9-35 μm (my) Diameter, core 76 mm Outer diameter, max 250 mm Selected options - Rustproof chassis 1) The machine can be customized (L x W x H ). Before order the pallet dimensions must be clarified and approved by the manufacturer. 4 EN

5 FULLY AUTOMATIC ARM Description CTA 1000 CTA 1100 Pallet flow 1 Up to 55 pallets/ hour Up to 75 pallets/ hour Ecostretch Pre stretch 8 gears, up to 400% Arm speed Frequency-controlled up to 18 rpm. Soft start and soft run-down Frequency-controlled up to 25 rpm. Soft start and soft run-down Film tension Adjustable Programs High flexibility due to variable parameter settings Top / bottom wraps Adjustable, 1-99 Elevator speed Adjustable 5 C (40 F) to 35 C (95 F) for use in a dry, tempered area. Max size (length x width) Option Min height incl. pallet: Max height incl. pallet (standard machine): 1200 x 1200 mm Larger pallet dimensions are available. 2 Option tailor made size Pallet weight (Max): Controller Depending on conveyor capacity. Siemens PLC Control voltage: 24 V Supply 400V, 3-phase + N + PE, 50Hz Loading 16 A IP code IP54 Pneumatics Air consumption: Compressed air dry air at 6 bar approx 10 l/cycle, air flow rate 100 l/min. Stretch film Film width, max 500 Film thickness 9-35 μm (my) Diameter, core 76 mm Outer diameter, max 250 mm Selected options - Galvanized chassies - Welding unit 1) Please note that there are a lot of factors that affect the maximum pallet flow such as pallet height, amount of wraps & transportation speed etc. 5 EN

6 FULLY AUTOMATIC TURNTABLE RING The pre stretch makes the film thinner and stronger, which contributes that our customers need less consumptions material. Description CTT 1000 CTR 2000 CTR 2000 TWIN Pallet flow 1 Up to 70 pallets/hour Up to 120 pallets/ hour. Up to 140 pallets/ hour Ecostretch Pre stretch 8 gears, up to 400% 7 gears, up to 300% Table / Ring Frequency-controlled up to 22 rpm. Soft start and soft run-down. Frequency-controlled up to 45 rpm. Soft start and soft run-down Powered by battery Slip ring Table size Ø 1800 n.a. Film tension Adjustable Adjustable Programs 5 +1 for manual operation High flexibility due to variable parameter settings Top wraps, Bottom wraps Adjustable, 1-99 Adjustable, 1-99 Elevator speed Adjustable Adjustable 5 C (40 F) to 35 C (95 F) for use in a dry, tempered area. Max size (length x width) Option 1200 x 1200 mm 800 x 2300 mm 1200 x 1200 or 1400 x 1000 mm Larger pallet dimensions are available. Min height incl. pallet: Max height incl. pallet (standard machine): 2 Option up to 2600 mm 2 Option up to 3100 mm Pallet weight (Max): 1500Kg (Option: 2000 Kg) Depending on conveyor capacity Transport height mm Depending on the convayor height Controller Vipa PLC Siemens PLC Control voltage: 24 V Ring 48 V, Cabinet 24 V Supply 400V, 3-phase + N + PE, 50Hz 400V, 3-phase + N + PE, 50Hz Loading 16 A 16 A 25 A IP code Pneumatics Air consumption: Stretch film Film width, max Film thickness Diameter, core Outer diameter, max Options More option are avaiable in Options list Compressed dry air, 6 bar, approx. 12 NL/pallet, 3/8 - Chain conveyor - Top Plate - String roller - Welding unit - Conveyor for big loads 1) Please note that there are a lot of factors that affect the maximum pallet flow such as pallet height, amount of wraps & transportation speed etc. IP54 Compressed dry air, 6 bar, approx. 18 NL/cycle μm (my) 76 mm Pneumatics Stretch film Compressed dry air, 6 bar, approx. 26 NL/cycle. 250 mm - TSD 2000 (Integrated Top Sheet Dispenser) - Extended ring - Top Plate - Welding unit - String roller 6 EN

7 TOP SHEET DISPENSERS The Cyklop top film dispenser is usually included in a fully automatic line next to a stretchwrapper when palletised goods need protection from dust or dampness on top. The machine is easy to fit and made of aluminium. Machine CTFP TSD 1000 / TSD 2000 PLR Short description Applies plastic film on top of palletized goods For extra water protection, the production line can be fitted with equipment which, together with the Cyklop stretchwrapper, will also meet this requirement. Lays sheet on moving pallets. TSD Top sheet dispenser integrated into stretch wrapper 2) CTR TSD The Cyklop top film dispenser is usually included in a fully automatic line next to a stretchwrapper when palletized goods need protection from dust or dampness on top. The machine is easy to fit and made of aluminium. For extra water protection, the production line can be fitted with equipment which, together with the Cyklop stretchwrapper, will also meet this requirement. Adds sheet on stationary goods. Adds sheet on stationary goods. Pallet flow 1 Up to 85 pallets/hour. Up to 90 pallets/hour. Up to 60 pallets/hour. Machine weight: 300 Kg 500 Kg 300 Kg Elevator speed Adjustable Adjustable Adjustable Working area Arm, custom lenght Arm, custom lenght Arm, custom lenght 5 C (40 F) to 35 C (95 F) for use in a dry, tempered area. Film Size, width 1300, 1600, 1800 mm mm Custom size Size, length up to 2000 mm up to 1900 mm Custom size Film thickness Up to 80 my Up to 80 my Diameter, core Max. 200 mm - Outer diameter, max 250 mm - Controller Siemens PLC Siemens PLC Siemens PLC Control voltage: 24 V 24 V 24 V Supply 3-phase 400V + N + PE 50Hz 3-phase 400V + N + PE 50Hz 3-phase 400V + N + PE 50Hz Loading 10 A 10 A 10 A IP code IP54 IP54 IP54 Pneumatics Air consumption: NL/pallet at 6 bar NL/pallet at 6 bar NL/palle at 6 bar Connection 3/8 3/8 3/8 1) Please note that there are a lot of factors that affect the maximum pallet flow such as pallet height, amount of wraps & transportation speed etc. 2) Remark for CTR 2000 / TWIN with TSD 2000: For loads lower than 750 mm, a lifting table should be used for best packing result. 7 EN

8 TWIN PACK / CBC Machine Twin Pack CTT XP 112 MVB Short description: CTT 215 stretch wrapper and the XP 112 MVB strapping machine in combination. Two types of transport protection combined in one machine. The CFH 1 strapping head - capable of tensioning up to more than 5500 N, welded joint that secures the applied tension around any pack is the answer. CTT 215 have film 300% pre stretch aggregate, Power Ecostretch. Film carriage speed selectable within 6 steps (6 different overlays), 100 mm distance till 120 mm overlapping of the film. The separate numbers of bottom and top layers can be preselected from the control board (following the main menu of touch panel). Adjustable load height photoelectric barrier allows to define the stretch film overlap on the top of package. Control system: The general status of TwinPack 112 will be shown on the all-around lighting (3 colour signal). Operation of strapping and wrapping system by touch panel on central control board (colour display). Pallet flow 1 Approx. 30 pallets/hour. Pre stretch film 300 % Table speed Frequency-controlled, rpm. Soft start and soft run-down. Top/bottom wraps 1-6 Strap feed / retraction 2,9 or 3.7 m/sec - ensures a quick strapping cycle Method of insertion: Strap on strap Type of seal: Friction sealing Tensioning force: Up to Newton (N) Wrapping programs: Economy wrapping, Standard wrapping or No wrapping Strapping programs: Lateral strapping (1 or 2 strappings), Longitudinal strapping (1 or 2 strappings), Cross strapping (lateral and longitudinal strapping) or No strapping Strap dispenser Machine weight (total) KA 4 - Right, KA 4 - Left or KA 4 - Tandem 5 C (40 F) to 35 C (95 F) for use in a dry tempered area Kg Max size (length x width) 1200 x 1200 mm Min height incl. pallet 450 mm Max height incl. pallet 1500 to 2100 mm. Pallet weight: (max) 1500 Kg Controller PLC Siemens S7, status of machine shown by touchpanel Control voltage: 24 V DC Supply 3/ N, PE, (Neutral wire = loading capacity) Power rating: 3,2 kw Loading 16 A IP code According VDE 0100/0113, EN 60204, protection class IP 54 Option Safety fence packages Safety guarding according the European occupational health and safety regulation. Rugged pole- and frame design. Access control with multiple safety light beams device for personal security. Soft-stop-function oft the turntable when activating the Emergency stop. Machine Short description standard machine Funktion Capacity Machine weight: Machine dimensions Sound level Running empty Plastic straps Steel straps Strap Steel Max (length x width) Option Power Supply Loading IP code EX classification Options Sound insulation kit Automatic start and stop Safety cage for barrel CBC - Strap chopper Cuts steel straps up to max 32 mm width into 85 mm length. Does also manage high tensile steel straps, PP, PET straps and straps with seals. The strap cutter is placed on top of an open and empty barrel. The function is simple feed in the strap a bit and the machine cuts the whole length. 30 m/min 120 Kg Height: 350 mm Lenght: 800 mm Width: 600 mm 5 C (40 F) to 35 C (95 F) for use in a dry, tempered area. 70 dba 12 x 0,80: 85 dba 12 x 0,80: 95 dba 32 x 1, N/mm2, excl. seal 32 x 0, N/mm2, incl. seal 3-phase, 400V, 50Hz 16 A IP54 Not approved for ATEX classified areas Running empty: 60 dba Plastic straps: 12 x 0,80: 75 dba Steel straps: 12 x 0,80: 85 dba Open the gate, change/empty the barrel without lifting the machine. 8 EN

9 CTT 200 / 210 / 230 / 300 CTT 210 / 230 / 300 HS Dim (mm) A B C D E F G H I Standard Ø1650 C I B D E F H G A Weight, standard: 480 kg (Weight can vary depending on options). Crated dimensions: L2900 x H750 x W1700 mm, weight: 650 kg. CTA 215 / 300 Dim (mm) A B (Ø) C D Standard Weight, standard machine: 690 kg (Weight can vary depending on options). D B A C d

10 CTT 1000 W1800 CTA 1000 / CTA 1100

11 CTR 2000 / CTR 2000 TWIN CTR 2000 TWIN CTR 2000 C A B Dim (mm) A B C D GL * GL 2000 TWIN * * With ITF C D Dim (mm) With ITF With top plate With ITF + top plate Machine height (Std.) Pallet height, max Incl. transport height 300 mm A B D Measurement goods F G E Dim (mm) E F G Weight Pallet, min >500 Pallet, max 1200/1400** 1200/1000* < 2500*** < kg ** Option for larger pallet dimensions are available, more info.: *** Option for pallet heights up to 3100 mm is available. Crated dimensions std machine: L3800 x W2600 x H2850 mm. Weight 2000 kg. Remark for GL 2000 with ITF: For loads lower than 750 mm, a lifting table should be used for best packing result.

12 TESTING FACILITIES Our stretch wrapping center is always open. We are able to conduct all kinds of wrapping tests (tilting, crashing, etc.) and also issue film calculations. It will be very easy to establish the packing quality and cost on customer pallets. In the centre you will always find latest versions of semi and fully automatic machines as well as machines for horizontal wrapping. The centre is also meant to be used for various educations both technically and sales oriented and it will help in keeping the knowhow on a high level for service engineers as well as sales staff. The centre is open for distributors, OEM: s and end-users and we are convinced that it will help distributors in the selling process and make it easier for the OEM: s and end-users in their decision making. When booking time in the centre please contact the reception or your normal contact person at CT. Most welcome! Urban Ursing Tilting and crashing test. Stretch wrapping technology through innovation