Tail lamps Execution Note:
|
|
- Ronald McCoy
- 5 years ago
- Views:
Transcription
1 Depending on the specification of the vehicle when it is ordered, the vehicle is delivered with one of the following tail lamps: Contact a Scania dealer for more information. Compact 7-chamber lamp assembly LED lamp Standard 7-chamber lamp (up to ). Tail lamps are always delivered from the factory fully fitted. Note: Lamps fitted by bodybuilders must be certified in order for the vehicle to achieve type approval. More information on type approval can be found in the document Type approval of vehicles within the EU. 13:40-01 Issue 5 en-gb 1 (9)
2 Tail lamps Compact 7-chamber lamp assembly Functions: Position lamp Brake lamp Side marker lamps Side retro-reflector End-outline marker lamp Direction indicator Rear foglight Reversing light Reverse alarm (option) Rear reflector Registration plate lamp The compact 7-chamber lamp dimensions are 400 x 160 x 89 mm (width x height x depth). In addition, of lateral clearance towards the centre is required for the electrical connection. Tail lamps with connection on the rear can be ordered as an S-order or FFU. Contact a Scania dealer for more information. The lamp can also be purchased as a spare part. Compact 7-chamber lamp assembly Designation Part number Tail lamp - right-hand (with reverse alarm) Tail lamp - left-hand (with reverse alarm) :40-01 Issue 5 en-gb 2 (9)
3 LED tail lamp Functions: Position lamp Brake lamp Side marker lamps Side retro-reflector End-outline marker lamp Direction indicator Rear foglight Reversing light Reverse alarm (option) Rear reflector Registration plate lamp LED tail lamp The document Additional tail lamps provides information on how to switch over to LED tail lamps. Contact a Scania dealer for more information. The dimensions of the LED tail lamp are 400 x 135 x 82 mm (width x height x depth). of lateral clearance towards the centre is required for the electrical connection. 13:40-01 Issue 5 en-gb 3 (9)
4 Tail lamps 7-chamber lamp of standard type Vehicle production period Production site Chassis serial number Södertälje Zwolle Angers Functions: Position lamp Brake lamp Side marker lamps Side retro-reflector End-outline marker lamp Direction indicator Rear foglight Reversing light Reverse alarm (option) Rear reflector Registration plate lamp 7-chamber lamp dimensions are 515 x 130 x 81 mm (width x height x depth). In addition, of lateral clearance towards the centre is required for the electrical connection. 7-chamber lamp of standard type 13:40-01 Issue 5 en-gb 4 (9)
5 Fitting Fitting Tail lamps can be fitted as follows: On standard bracket. In underrun protection. If positioning the tail lamps in the underrun protection, they must be fitted in a fixed underrun protection with U-profile. When the lamps are ordered with an extra long cable harness (600 and 1,200 mm extension) they can be positioned on the box bodywork without the need for the cable harness to be spliced. The standard length cable harness is tailored so that the tail lamps can be positioned in the standard brackets of lateral clearance towards the centre is required for the electrical connection. This does not apply to lamps with connection on the rear. Tail lamps must fulfil several legal requirements related to factors such as visibility and viewing angles. Be sure to comply with national legal provisions. Further information about how to extend the rear overhang is available in the document Changing the rear overhang. Vertical fitting Note: None of the lamps are approved for vertical fitting. 13:40-01 Issue 5 en-gb 5 (9)
6 Fitting On standard bracket If the lamp must be moved, an extended cable harness must be ordered. 7-chamber lamp of standard type LED lamp Compact 7-chamber lamp assembly 13:40-01 Issue 5 en-gb 6 (9)
7 Tail lamps Fitting Tail lamp fitted in the underrun protection The tail lamp can be located in the underrun protection with a U-profile. The underrun protection 1 protects the tail lamps during dumping or the like. Variant codes Option On standard bracket In underrun protection (U-profile) Variant code 1532A 1532B 1. The underrun protection is delivered transport-mounted and must be fully fitted in accordance with the instructions. 13:40-01 Issue 5 en-gb 7 (9)
8 Other equipment Other equipment Length of the cable harness Select the extended cable harness for the tail lamps if their location is changed when the bodywork is finished. The options for an extended cable harness are 600 and 1,200 mm, respectively. Variant codes Option Extended 600 mm Extended 1,200 mm No extension Variant code 1533A 1533B 1533Z Retro-reflector in accordance with ECE-R70 If the tail lamps are located on the underrun protection a red and yellow striped retroreflector, in accordance with ECE-R70, can be selected for fitting to the underrun protection (as illustrated). Variant codes Option With retro-reflector Without retro-reflector Variant code 1934A 1934Z 13:40-01 Issue 5 en-gb 8 (9)
9 Other equipment Tail lamp protection It is possible to fit the tail lamp on a standard bracket without a panel with tail lamp protection. The protection comprises a plate which is angled over the tail lamp. The protection is available in 2 designs. Painted Stainless steel Variant codes Option Variant code Option Variant code Tail lamp protection 4493A Painted Stainless steel 4754A 4754B Painted tail lamp protection Stainless steel tail lamp protection 13:40-01 Issue 5 en-gb 9 (9)
Connecting additional side marker lamps. Description. Activation
Description Description Side marker lamps can be connected in different ways depending on whether the vehicle has been supplied from the factory prepared for this: All vehicles can be supplemented with
More informationSide marker lamps from the factory. General information
General information According to the UNECE R48 regulation, the vehicle is required to be equipped with side marker lamps if it is longer than 6 metres and has bodywork. General information For vehicles
More informationTail lift preparation. General information about the preparation. Vehicles manufactured as from September 2015
General information about the preparation General information about the preparation In order to facilitate the electrical connection of a tail lift, the preparation package for the tail lift cable harness
More informationRemote activation of visibility and lighting functions
Function Function The following visibility and lighting functions can be activated remotely: More information on lighting is found in the Deactivation of the driving light and Alternating main beam flashing
More informationTowing units. General information on towing units PGRT
General information on towing units General information on towing units is a collective term for one or more components with which the vehicle must be equipped in order to tow a trailer. The purpose of
More informationC494 Connector for cable harness from cab to frame
C494 C494 C494 is a 21-pin connector that gives the bodybuilder access to a number of signals and functions, depending on the vehicle specification. The connector also makes it possible to adapt the vehicle
More informationRemote engine start. Function. Behaviour. The remote engine start function is used to start the engine from outside the cab.
Function Function The remote engine start function is used to start the engine from outside the cab. Behaviour The direction indicators are used to provide a visual acknowledgement as to whether the attempt
More informationSpeed limiter. General information on the functions. Order of priority between the speed limiters
General information on the functions General information on the functions Scania offers 4 functions for limiting speed. The functions are used to meet customer and statutory requirements regarding, for
More informationActivation of EG power take-off. Function
Function Activation of EG power take-off The function is intended to activate the power take-off from the driver area and from outside the cab. The power take-off is controlled by the BCI control unit(bodywork
More informationFoot plate activation according to EN Function
The function is a customer option for refuse collection trucks fitted with a foot plate. When the foot plate is activated according to this description, the function protects personnel on the foot plate.
More informationBodywork interface. Description. Bodywork interface. BCI (Bodywork Communication Interface)
Description Description Bodywork interface The electrical system in Scania vehicles is based on a number of control units that communicate with each other via a common network. To use existing technology,
More informationCabling and cable harnesses. General
General General This document describes the handling and dimensioning of electrical cables and cable harnesses. To facilitate work with the bodywork there are a number of electrical cables and cable harnesses
More informationLegal requirements. More information on laws and regulations is found in the following documents:
General information on laws and regulations The directives and regulations for heavy vehicles are coordinated within the EU. These are implemented as legal requirements in the EU member states. Legal requirements
More informationRear end adaptations. Adapted length of rear overhang. Variant codes for some commonly occurring dimensions
Adapted length of rear overhang Adapted length of rear overhang The rear overhang can be ordered from the factory in length increments of 10 mm between the limit values 780 mm and 5,200 mm (see illustration).
More informationBodywork information in the instrument cluster
The instrument cluster is prepared with options for connecting and setting parameters for various types of function indications to adapt the vehicle's driver environment correctly to its area of use. The
More informationSplit shaft power take-off activation via BWS. General information about the function. Operation with the vehicle in motion and stationary
General information about the function General information about the function The split shaft power take-off is mainly used when very large power outputs are required. The advantage is that the half shafts
More informationActivation of a split shaft power take-off. Function
Function Function The function is intended to activate the power take-off from the driver area and from outside the cab. The power take-off is controlled by the BCI control unit. For the control of the
More informationG6B 30/11/17 x G6C 27/07/17 1
CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS SECTION 1 EVENTS, NEWS, MEMBERSHIP SERVICES, LEGAL & GENERAL INFORMATION SECTION 2 GENERAL TECHNICAL INFORMATION SECTION
More informationCommercial CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS
CATALOGUE OF THE WEBSITE DATA FOR BODYBUILDER & CV REPAIRERS AVAILABLE AS DOWNLOADS SECTION 1 EVENTS, NEWS, MEMBERSHIP SERVICES & GENERAL INFORMATION SECTION 2 GENERAL TECHNICAL & IVA SECTION 3 UN ECE
More informationRemote engine start. Function
Function Remote engine start is used to start the engine without turning the starter key to the start position, for example by using a switch outside the cab. Function There is also a function called Inhibit
More informationCertificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationAdjustable parameters Signalling and visibility systems
Introduction Introduction To limit this list of adjustable parameters, only parameters considered to be of use to bodybuilders are described. For full details of the current parameters for a specific vehicle,
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2016/83 Distr.: General 31 August 2016 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationContour Marking GRE Ad 'hoc meeting 25/11/2004
The Truck industry is very sensitive to improve safety Commercial Vehicles manufacturers are strongly committed to improving road safety through continual advances in active and passive safety of their
More informationComponents for hydraulic equipment. General. Actions before starting a new hydraulic system
General General It is possible to order components from the factory for operating hydraulic equipment. The following components are available: Control Hydraulic oil tank with pressure limiting valve Hydraulic
More informationSplit shaft power take-off activation. General information
General information Split shaft power take-offs are located between the gearbox and the driving axles. The power take-off disengages the driving axles and redistributes all available power from the propeller
More informationALLIANCE LED LIGHTING
ALLIANCE LED LIGHTING Original unique product design Used in harsh industries including transport, 4x4, marine trailer and Australian defence forces Quality LEDs and associated components Products manufactured
More informationFront-mounted equipment. Fitting front-mounted equipment
Fitting front-mounted equipment Fitting front-mounted equipment This document describes a number of solutions for fitting front-mounted equipment. More information is available in the document Limitations
More informationTrucks with a fixed flatbed body
General information General information Trucks with fixed flatbed body are mainly used for transporting e.g. general cargo, building materials and construction containers. The bodywork is regarded as being
More informationLED LIGHTING PARTS GUIDE
LED LIGHTING PARTS GUIDE ADR Better Parts. Good Prices. Alliance Truck Parts. LED LIGHTING PARTS GUIDE www.alliancetruckparts.com.au Page 1 Alliance LED Lighting A range of high performance, reliable LED
More informationVEHICLE LAMPS, BEACONS & REFLECTORS
VEHICLE LAMPS, BEACONS & REFLECTORS CALL 0383 7984 ORDER ONLINE unitedindustrial.co.uk FREE DELIVERY ON ORDERS OVER 75* BEACONS /4V Rotating Beacon Bolt Mounted Suitable for both V and 4V applications.
More informationTable 1 of Required lamps and reflectors on commercial motor vehicles
Table 1 of 393.11 Required lamps and reflectors on commercial motor vehicles Item on the vehicle Quantity Color Location Position Height above the road surface in millimeters (mm) (with English units in
More informationHELLA India Lighting Ltd
COMMERCIAL VEHICLES PRODUCT CATALOGUE Signal Lamp - HELLA India Lighting Ltd 6A, 6th Floor, Platinum Tower 184, Udyog Vihar Phase - I Gurgaon - 122016 (Haryana) Phone: +91 124 4658600 Fax: +91 124 4658699
More informationDirectional Arrows. Arrow Boards 56. AE850 Arrow Boards 60. Traffic Master 62
Arrow Boards 6 AE80 Arrow Boards 60 Traffic Master 6 Arrow Boards AAB-BB Complies to Australian standards and RTA FAS/. High intensity LED inserts certified to AS9:006. Double sided models available. Simple
More informationTROUBLESHOOTING INFORMATION
CONNECTOR1 CIRCUIT MEASUREMENT 1 - Ground SUB +B Power (Dome) Always Approx. 12V 2 - Ground +B Power (Dome) Always Approx. 12V 3 Trunk Key Input Continuity when key turned to open 4 - Ground Key Unlock
More informationLED SAFETY LIGHTING CATALOGUE
LED SAFETY LIGHTING CATALOGUE Peterson Manufacturing A Company You Can Trust Peterson Manufacturing is headquartered in a modern 670,000 square foot facility near Kansas City, Missouri, USA. Since 1945,
More informationCertificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationSPARE PARTS CURTAINSIDER
All of the original components and consumables are stored in our warehouses Germany, Russia and Turkey. This stock also includes original parts obtained from system partners and leading suppliers. REAR
More informationCertificate of Appointment. Eurofins Product Service GmbH
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More information. For 4S/3M applications an Integrated Speed Switch (ISS)
Commercial Vehicle Systems Product DATA PD-203-430 Function The Knorr-Bremse KB4TA module is an integrated ABS electronic control unit and dual modulator valve for air braked trailers (semi-trailers, centre-axle
More informationMICRO-EXCAVATOR SV05-B. 690 kg
MICRO-EXCAVATOR 690 kg COMPACTNESS Yanmar, the only manufacturer to offer a micro-excavator in this weight class. Compact dimensions > Width: only 690 mm. > Rear swing radius reduced to 735 mm. > Reduced
More informationIn-service certification (WoF and CoF) - Forklifts
In-service certification (WoF and CoF) - Forklifts Correct as at 23rd October 2018. It may be superseded at any time. 1 Introduction Inspection and certification of forklifts: Warrant of fitness requirements
More informationGrounding and power supply. General information. Grounding in chassis frame. This document contains information on the following:
General information This document contains information on the following: G32 General information Grounding of bodywork functions in the chassis frame Grounding of bodywork functions in the cab Power supply
More informationAPPENDIX 2-C-1 UN REGULATIONS APPLIED BY BOTH PARTIES
APPENDIX 2-C-1 UN REGULATIONS APPLIED BY BOTH PARTIES Regulation 3 Uniform provisions concerning the approval of retro-reflecting devices for powerdriven vehicles and their trailers 4 Uniform provisions
More informationTRAILER PASSPORT. instruction manual maintenance warranty
TRAILER PASSPORT instruction manual maintenance warranty trailer model article no. vehicle identity number initial registration date of transfer name and signature of your respo representative 1 Congratulations!
More informationtime for smarter solutions scania heavy tipper
time for smarter solutions scania heavy tipper We provide a framework of people, methods, tools and information to increase productivity, reduce costs and manage risks better in mining operations. 2 Scania
More informationSprinter New product features 2016
Sprinter New product features 2016 The Sprinter. On course for success. There s just so much you can move with the Sprinter. Right since its launch in 1995 it has been one of the most successful vans in
More informationAssembly date Current distributor, country ZZ. Gross weight 0 Order Number Order type A Delivery mode CBU
General Information VIN Code YS2G6X600D2093776 Factory warranty,valid until Delivery Date Invoicing date Assembly date 2013 12 04 Current distributor, country ZZ Original distributor, number 00000 Local
More informationE/ECE/324/Rev.1/Add.57/Rev.2/Amend.4 E/ECE/TRANS/505/Rev.1/Add.57/Rev.2/Amend.4
11 July 2016 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for
More information1 HB By Representatives Whorton (R), Pettus and Hanes. 4 RFD: Public Safety and Homeland Security. 5 First Read: 30-JAN-18.
1 HB333 2 189008-1 3 By Representatives Whorton (R), Pettus and Hanes 4 RFD: Public Safety and Homeland Security 5 First Read: 30-JAN-18 Page 0 1 189008-1:n:11/30/2017:KBH/tj LSA2017-3596 2 3 4 5 6 7 8
More informationRV, marine and utility trailer lighting
RV, Marine and Utility Trailer Lighting 81 Ultimate LED Trailer Lighting Kit Easily retrofits any 14 to 28 boat trailer Maintenance- and hassle- free Water resistant Rear combination clearance/marker must
More informationDraft Proposal for 01 series of amendments to UN Regulation No.0 (International Whole Vehicle Type Approval)
Transmitted by IWVTA IWG document WP.29-175-14(IWVTA-27-04) Draft Proposal for 01 series of to UN Regulation No.0 (International Whole Vehicle Type Approval) Annex 4 of UN Regulation No.0, amends to read;
More informationTRUCKS, BUSES, MPVs: FEDERAL LIGHTING EQUIPMENT LOCATION REQUIREMENTS. BASIC EQUIPMENT REQUIRED ON ALL TRUCKS, BUSES & MPVs
TRUCKS, BUSES, MPVs: FEDERAL LIGHTING EQUIPMENT LOCATION REQUIREMENTS IMPORTANT NOTE: Every lamp, reflex reflector, and conspicuity treatment (device) must be permanently attached in the location specified
More informationProduct Catalogue. Version 8.0. DSection. LED Rear Combination Lamp
Product Catalogue DSection Version 8.0 LED Rear Combination Lamp PRODUCT CATALOGUE 8.0 LED Tail Lamps Part List Effie L1201 LED Tail Lamp Part No : 00-15-826-0L1201-EFF Remarks : Signal / Brake, 24 Volts
More informationThe Hella ADR Installation Guide
The Hella ADR Installation Guide The following pages are a guide to installing Hella Lamps in compliance with the Australian Design Rules (ADRs). The diagrams used are only intended as a general guide,
More informationChassis serial number: Delivery Date: Chassis type: R 730 LA6x4HNB
General Information VIN Code YS2R6X40002101549 Factory warranty,valid until 2016 01 02 Delivery Date 2015 01 02 Invoicing date 2014 07 10 Assembly date 2014 06 25 Current distributor, country NO Original
More informationSTATUTORY INSTRUMENTS. S.I. No. 449 of 2007 EUROPEAN COMMUNITIES (MOTOR VEHICLES UN ECE TYPE APPROVAL) (AMENDMENT) REGULATIONS 2007
STATUTORY INSTRUMENTS. S.I. No. 449 of 2007 EUROPEAN COMMUNITIES (MOTOR VEHICLES UN ECE TYPE APPROVAL) (AMENDMENT) REGULATIONS 2007 (Prn. A7/1287) 2 [449] S.I. No. 449 of 2007 EUROPEAN COMMUNITIES (MOTOR
More informationb) two pairs of dipped-beam headlamps if the vehicle was first registered anywhere between 1 January 1977 and 31 March 1980, or
Correct as at 23rd November 2013. It may be superseded at any time. Extract taken from: NZTA Vehicle Portal > VIRMs > In-service certification (WoF) > General vehicles > Lighting 4 Lighting 4-1 Headlamps
More information2006 TRUCK ELECTRICAL
INDEX 2006 TRUCK ELECTRICAL Subject Page Number Alternator Specifications 2 Battery Applications 2 Cold Weather Recommendations 3 Standard Lighting / Reflector Equipment 3 Light Specifications and Usage
More informationSigns, Flags and Lights
Signs, Flags and Lights ALABAMA Oversize Load signs front and rear of any overwidth or overlength vehicle. Flags must be placed at front and rear corners of any over dimensional load or vehicle. Over 4'
More informationAxle load calculations
All types of transportation work using trucks require the truck chassis to be supplemented by some form of bodywork. The aim of axle load calculations is to optimise the chassis and bodywork location.
More informationSubframe design. More information on chassis frames is found in the document Chassis frames.
General General The subframe can be used for the following purposes: It provides clearance for wheels and other parts which protrude above the frame. It provides rigidity and reduces the stress in the
More informationBulk tankers. General information General information. Scania Truck Bodybuilder 22: Issue Scania CV AB 2017, Sweden 1 (11)
General information General information Bulk tankers are used for the transportation of dry goods such as pellets, cement and foundry sand. Examples of common bulk bodies: Horizontal cylindrical tank Horizontal
More information(Text with EEA relevance)
28.4.2011 Official Journal of the European Union L 108/13 COMMISSION REGULATION (EU) No 407/2011 of 27 April 2011 amending (EC) No 661/2009 of the European Parliament and of the Council as regards the
More informationEZ26. The design for champions: EZ26. Tracked Zero Tail Excavators
EZ26 Tracked Zero Tail Excavators The design for champions: EZ26 The compact excavator EZ26 guarantees modern design, flexibility and ease of use. Transportation by car trailer to the next construction
More informationF700 F800 F950 F957 F958
Scania chassis frame range The chassis frame consists of 2 frame side members. Scania chassis frame range More information on a specific chassis is found in the individual chassis specification (ICS) and
More informationScania at Eurosatory 2012 Maximum modularity tailored solutions are standard
PRESS info P12602EN / Per-Erik Nordström June 2012 Scania at Eurosatory 2012 Maximum modularity tailored solutions are standard Scania's strategy of continuously refining its products means that the truck
More informationMANISTEE COUNTY ROAD COMMISSION 2019 TANDEM AXLE TRUCK SPECIFICATIONS AND BID REQUIREMENTS (ALTERNATE BID) January 4, 2018
GENERAL 1. The following minimum specifications are for a tandem axle truck (conventional cab and chassis with an engine and transmission). 2. The truck shall be the manufacturer s current model under
More informationTechnical specifications. ET145 Tracked Conventional Tail Excavators. Compact excavator in a new weight class - ET145
ET145 Tracked Conventional Tail Excavators Compact excavator in a new weight class - ET145 The ET145 is a compact excavator designed for power and productivity. This 14-ton excavator combines the productivity
More informationRear Bumper Functional solutions in high-quality design. Member of the BPW Group
Rear Bumper Functional solutions in high-quality design Member of the BPW Group The strong solution at the market Individually adapted for optimal use Certified production In Denmark Ermax produces the
More informationGuideline for Multi-combination Vehicles
Guideline for Multi-combination Vehicles Road Trains B-doubles B-triples AB-triples BAB-quads ABB-quads in Queensland Form Number 1 Version 11 July 2013 TABLE OF CONTENTS SECTION CONTENT PAGE 1 Statutory
More informationSoutheast Crush & Screen LLC # Fax #
Southeast Crush & Screen LLC #615-289-9890 Fax # 931-540-0048 www.secrushandscreen.com Transportation Dimensions 14375 [47'-2"] 4140 [13'-7"] Feeding Height 3400 [11'-2"] Transport Height 3330 [10'-11"]
More informationConspicuity marking requirements on goods vehicles
Conspicuity marking requirements on goods vehicles C E1 104 R 0001 0001148 001 011 148 FTA Compliance Guide Edition 2 February 2011 Delivering safe, efficient, sustainable logistics FTA compliance guide
More informationElectric Vehicles Engineering Approval Evaluation Program 电动汽车定型试验规程
Translated English of Chinese Standard: GB/T18388-2005 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 43.080.01 T 47 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC
More informationANNEXES. to the COMMISSION DELEGATED REGULATION
EUROPEAN COMMISSION Brussels, 15.2.2018 C(2018) 863 final ANNEXES 1 to 2 ANNEXES to the COMMISSION DELEGATED REGULATION amending and correcting Delegated Regulation (EU) 2015/208 supplementing Regulation
More information300.9D. Mini Hydraulic Excavator
300.9D Mini Hydraulic Excavator Engine Gross Power (ISO 14396) 13.7 kw 18 hp Net Power 9.6 kw 13 hp Weight Operating weight without Safety frame 935 kg 2,061 lb Operating weight with Safety frame 985 kg
More informationE/ECE/324 AGREEMENT. Addendum 47: Regulation No. 48. Revision 4 - Amendment 1
} Rev.1/Add.47/Rev.4/Amend.1 10 November 2006 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED
More informationGENERAL INFORMATION PROCEDURE FOR HANDLING CHASSIS/DEALER CLAIMS GOVERNMENT REGULATIONS PAGE. General. Filing a Claim. Disposition of Damaged Parts
GENERAL INFORMATION 1 PROCEDURE FOR HANDLING CHASSIS/DEALER CLAIMS General All chassis tendered for delivery by the Transportation Company are to be accepted by the Body Company. If a chassis has been
More informationGRAVITY LED 7 HEADLIGHT & GRAVITY LED 7 PRO HEADLIGHTS
At the center of KC s new Gravity LED 7 Headlight is our patented Gravity GRD (Gravity Reflective Diode) technology, which is engineered to maximize every lumen emitted from the LED. By directing the LEDs
More informationCHAPTER 11. LAMPS AND REFLECTORS
39A:11-LR1. Definitions CHAPTER 11. LAMPS AND REFLECTORS a. "Approved" means approved by the Commission, in good working order, and capable of operating at least 50% of their designed efficiency. b. "Asymmetric
More informationE/ECE/324/Rev.1/Add.57/Rev.3 E/ECE/TRANS/505/Rev.1/Add.57/Rev.3
30 November 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationOfficial Journal of the European Union
L 140/8 COMMISSION DELEGATED REGULATION (EU) 2018/829 of 15 February 2018 amending and correcting Delegated Regulation (EU) 2015/208 supplementing Regulation (EU) No 167/2013 of the European Parliament
More informationHARNESS FUNDAMENTALS. 1. Harness Basics SECTION OBJECTIVES
HARNESS FUNDAMENTALS SECTION OBJECTIVES. Harness Basics. Wiring Color Codes. Tools Of The Trade. Wiring Schematics. Harness Basics Trailer harnesses are collections of multiple wires within a single cable
More informationCARROSSERIE LEMEIRE BVBA (00 32 (0) ) PRESENTATION SEMI-TRAILER KG WITH EU TYPE APPROVAL E6*2007/46*0105*00
(00 32 (0)52 47 05 48) PRESENTATION SEMI-TRAILER 18.500KG WITH EU TYPE APPROVAL E6*2007/46*0105*00 Page 1 PRESENTATION SEMI-TRAILER 18.500kg LEMEIRE S.A.18500 (LOW FLOOR CHASSIS with disc brakes) E6*2007/46*0105*00
More informationREGULATIONS Official Journal of the European Union L 200/1
31.7.2009 Official Journal of the European Union L 200/1 I (Acts adopted under the EC Treaty/Euratom Treaty whose publication is obligatory) REGULATIONS REGULATION (EC) No 661/2009 OF THE EUROPEAN PARLIAMENT
More informationSIRA ROAD SIGNS AND LIGHTING. Rear reflecting panels for bulky goods. Panels for trucks drive. Kit 2 truck panels size mm 140x565
Rear reflecting panels for bulky goods Panels for trucks drive G 20442 G 20443 Kit 2 truck panels size mm 140x565 Kit 2 truck panels size mm 140x565 according to regulation ECE ONU 70 amendment 01 Panels
More informationLIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 16 th December Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on Amd. 2 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 Automotive Vehicles - Rear - View Mirrors Specification
More information2010 Electrical. (1) Rated current rpm) per ISO 8854: 1988 (E) and SAE JUN Actual output is temperature and application dependent.
21 electrical ALTERNATOR SPECIFICATIONS Output (ampere) (1) 15 11 115 12 135 14 Output (watts) 16 1485 (E-Series) 1725 162 225 (E-Series) 189 1825 (F-SD) Output (ampere) (1) 1 155 16 175 2 225 Output (watts)
More informationEquipmentlist. Paint. Tyres. Standard equipment
Model: Mercedes-Benz Actros 3 Vehicle type: 3340 S Drivetrain: 6X4 Baumuster: 93416112 Vehicle type: Semitrailer tractor Driver cabin: S-Cab Engine power: 290 kw (394 PS) Wheelbase: 3300 mm Gross vehicle
More informationWeighing equipment. Installation of weighing cells
General information on weighing equipment General information on weighing equipment Weighing the vehicle s load can be done in different ways depending on, among other things, use, type of bodywork or
More information2008 Electrical. F-53 Class A Motorhome Chassis 6.8L 3V SOHC Triton V-10 Std.
2008 ELECTRICAL ALTERNATOR SPECIFICATIONS Output (ampere) (1) 110 115 120 135 140 Output (watts) 1650 1725 1800 2025 2100 (1) Based on hot performance @ 80 F. BATTERY APPLICATIONS Ampere-Hour Rating 58
More information(Acts whose publication is not obligatory) COUNCIL COUNCIL DIRECTIVE 93/92/EEC. of 29 October 1993
14. 12. 93 Official Journal of the European Communities No L 311/1 II (Acts whose publication is not obligatory) COUNCIL COUNCIL DIRECTIVE 93/92/EEC of 29 October 1993 on the installation of lighting and
More informationFinalization of Annex 4 of UN Regulation No.0
Transmitted by IWVTA Informal Group Finalization of Annex 4 of UN Regulation No.0 document WP.29-172-12 (172nd WP.29, agenda item 4.3) 1. R14/08 removing requirements for CRS anchorage is expected to be
More informationET145 Tracked Conventional Tail Excavators
ET145 Tracked Conventional Tail Excavators ET145 - The champion of the compact excavators. Wacker Neuson's ET145 offers massively enhanced performance, without the size of the excavator ever posing a problem.
More informationContents SAE Compliant LED Lamps
Contents Compliant Lamps Euro Series54 110mm Round Lamps 54-55 Dura Series 56-57 Dura Surface Mount Marker Lamps 58 Recess Mount Clearance Lamps 59 Centre High Mount Stop Lamps 60-61 Daytime Running Lamps
More informationSPORTSTER SADDLEBAG KIT. i i02212
General These saddlebags are designed to fit 99 and later Sportster Model Motorcycles, except XL00 Sport models with gas reservoir shock absorbers and 88R models. See the Service Parts pages for a list
More informationSCION tc SECURITY (V5) Preparation
Preparation Part Number: PT398-21070 Kit Contents Item # Quantity Reqd. Description 1 1 2 1 GBS ECU Hardware Bag Contents Item # Quantity Reqd. Description 1 1 V5 Security ECU 2 1 ECU Mounting Bracket
More informationTOYOTA HIGHLANDER w/smart Key TVIP V4 REMOTE ENGINE STARTER (RES) Part Number: PT
Preparation Part Number: PT398-48083 Conflicts Do not install into vehicles without RKE systems. Will not program with Techstream Lite. Recommended Sequence of Application Item # Accessory Kit Contents
More informationLIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 29 th February Automotive Vehicles - Rear - View Mirrors Specification
1. AIS-001 LIST OF AUTOMOTIVE INDUSTRY STANDARDS AIS Title Status as on 2. AIS-001(Part 1) (Rev. 1) :2011 3. AIS-001 (Part 2) (Rev. 1) : 2011 4. AIS-002 Automotive Vehicles - Rear - View Mirrors Specification
More informationSHAPELINE PRODUCT OVERVIEW.
SHAPELINE PRODUCT OVERVIEW www.hella.com/shapeline CONTENT Introduction 2 Configuration tool Module overview 4 Technical data 4 28 Connector overview 29 Mounting instructions CUSTOMISED LIGHT DESIGN! The
More information