SHAPELINE PRODUCT OVERVIEW.

Transcription

1 SHAPELINE PRODUCT OVERVIEW

2 CONTENT Introduction 2 Configuration tool Module overview 4 Technical data 4 28 Connector overview 29 Mounting instructions CUSTOMISED LIGHT DESIGN! The variety and range of shapes and the various combination options paired with a technically optimised product design make the new Shapeline light series a true innovation in vehicle lighting. Whether the front, side or rear of a vehicle, every vehicle series whether big or small can have a unique and, above all, consistent look using a customised configuration and arrangement of lights. This allows us to meet the demands of vehicle manufacturers with lower numbers of manufactured vehicles. Along with innovative technology and the familiar high quality of HELLA's products, the variety of shapes of Shapeline lights provide you with nearly infinite design freedom. Design your light with HELLA Shapeline! Premium Design Flexible Robust Simple and safe ECE and SAE Multivolt

3 2 DESIGN FREEDOM AT THE CLICK OF A MOUSE The HELLA Shapeline online configuration tool turns you into a lighting designer: With a few clicks, make your own vehicle light design for the front, sides, and rear and see the result directly after, as applied convincingly to a car outline.

4 MODULE OVERVIEW The modular HELLA Shapeline product range provides a variety of different light functions that can be combined with each other individually. Here, all lights are available in two different designs: The classic straight-line Shapeline Tech design and the dynamic curved Shapeline Style design. Tech or Style: The HELLA Shapeline series provides design freedom for nearly any application and vehicle, and achieves a consistent light signature for your vehicle at the same time.

5 4 5 FRONT STYLE Position lights Reflex reflectors Technical data see page 5. Technical data see page 7. s TECH Position lights Reflex reflectors Technical data see page 5. Technical data see page

6 FRONT STYLE s Technical data see page 7. s TECH s Technical data see page. s

7 7 SIDE STYLE s Reflex reflectors Technical data see page 2. Technical data see page 2. s TECH s Reflex reflectors Clearance lights Technical data see page 2. Technical data see page 2. Technical data see page 7. s

8 SIDE STYLE Side-marker lights Technical data see page TECH Side-marker lights Technical data see page

9 8 9 REAR STYLE Position lights Stop tail lights Technical data see page 22. Technical data see page s TECH Position lights Stop tail lights Technical data see page 22. Technical data see page

10 REAR STYLE s Technical data see page s TECH s Technical data see page

11 REAR STYLE Stop tail direction indicators Reverse lights Technical data see page 2. Technical data see page s TECH Stop tail direction indicators Reverse lights Technical data see page 2. Technical data see page

12 REAR STYLE Rear fog lights Technical data see page s TECH Rear fog lights Technical data see page

13 REAR STYLE Reflex reflectors Amber warning lights Design element Technical data see page 28. Technical data see page 28. Technical data see page 28. s TECH Reflex reflectors Technical data see page

14 TECHNICAL INFORMATION From the connection type to energy consumption and voltage: On the following pages, you will find the most important detail information and technical data clearly structured in table form for each module. Electromagnetic compatibility EMC 5 Electromagnetic compatibility (EMC) tested and EU type approval issued. ADR/GGVS certification for transport of dangerous goods Light approved for transport of dangerous goods according to the European Agreement for the International Carriage of Dangerous Goods by Road (ADR; in German, GGVS). Voltage range 9 2 V Defines the power supply for the light. Short-circuit protection integrated Protected against short circuit by means of an amp fuse. ECE type approval Product is licensed according to ECE guidelines. SAE type approval Product has SAE type approval. Protection class IP X9K Resistant to high-pressure jet cleaners AECQ components qualified in accordance with the automotive standard Components qualified according to automotive standard. Operating temperature: - 4 C + C Thermal management and an optimised housing design guarantee full functionality for all operating temperatures through product tests from -4 C to + C. Indicator failure check ISO 7 Regulation in accordance with ECE-R48: The driver must be informed if the indicator function fails. To remain legally compliant, this requirement must also be fulfilled for LED lights. This requirement is fulfilled by means of an integrated self-diagnostic unit on the PCB of the LED and an electrical pulse. Since the end of 2, this HELLA failure check with a pulse has been an ISO Standard: ISO 7. Protection class IP K7 International Protection (IP) in accordance with DIN 4 part 9. The higher the protective class, the better the protection against penetrating media. IP 7 maximum value Completely sealed against dust and water. Polarity reversal protection included Even if the connecting cable is connected the wrong way around, there is no danger for the electronics.

15 4 5 Position light small front Position light small front LH Position light small front RH Position light in the front LH hor. Position light in the front RH hor. Position light in the front LH vert. Position light in the front RH vert. Position light in the front LH hor. Position light in the front RH hor. Position light in the front LH vert. Position light in the front RH vert. Design Tech Style Style Style Style Style Style Style Style Style Style Homologation ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE Connectors and wiring. mm receptacles 2 mm Open ends 25 mm Open ends 5 mm AMP SS 25 mm Open ends 25 mm Amphenol 25 mm AMP SS 25 mm Open ends 25 mm Amphenol 25 mm Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 2PF 2-2 2PF PF 2-2 2PF 24-2PF 24-2PF PF PF PF 24-2PF 25-2PF PF 25-2PF PF 2-2PF 2-2 2PF 2-2PF 2-4 Minimum order quantity for packaging index Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 5 / 4 5 / 4 5 / 4 5 / 4 5 / 75 5 / 75 5 / 75 5 / 75 Number of LEDs Power consumption at.5v/28v [W].5 /.9.5 /.9.5 /.9.5 /.9.5 /.9.5 /.9.5 /.9.5 /.9.5 / / / / / 2. Dimensions (length / width / height in mm) 2/4/8 2/4/8 2/4/8 8./4/2 8./4/2 8./4/2 8./4/2 8./4/2 8./4/2 89./4/25 89./4/25 89./4/25 89./4/ /4/ /4/ /4/ /4/25 Operating temp.: -4 + C Mounting system (= tape; 2= screw; = snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options available upon request

16 front LH hor. front RH hor. front LH hor. Wiping L R front RH hor. Wiping R L front RH hor. Wiping R L front LH hor. Wiping L R front LH vert. front RH vert. clear front front Design Style Style Style Style Style Style Style Style Tech Tech Tech Homologation ECE/SAE ECE/SAE ECE ECE ECE ECE ECE/SAE ECE/SAE ECE / SAE>22 ECE / SAE<22 ECE wiping front Connectors and wiring Integrated 2-pin AMP Integrated 2-pin AMP Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 2BA 4-2BA 4-2 2BA 4-5 2BA 4-2BA 4-8 2BA 4-7 2BA 4-2BA 4-4 2BA - 2BA 98-2BA 98- Minimum order quantity for packaging index Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 47 / / / / / / / / / / 5 27 / 5 Number of LEDs Power consumption at.5v/28v [W] / Dimensions (length / width / height in mm) 89./4/25 89./4/25 89./4/25 89./4/25 89./4/25 89./4/25 89./4/25 89./4/25 49./4/25 8/4/25 8/4/25 Operating temp.: -4 + C Mounting system (=tape; 2= screw; =snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection, LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options available upon request

17 7 front LH hor. front RH hor. front LH hor. Wiping R L front RH hor. Wiping L R front LH vert. front RH vert. Reflex reflector front Reflex reflector front LH Reflex reflector front RH Clearance light side mounting Light irradiation to the front and back Clearance light side mounting Light irradiation to the front and back Style Style Style Style Style Style Tech Style Style Tech Tech ECE/SAE<22 ECE/SAE<22 ECE ECE ECE/SAE<22 ECE/SAE<22 ECE/SAE ECE/SAE ECE/SAE ECE SAE 99.8/4/ /4/ /4/ /4/ /4/ /4/25 /4/.5/4/.5/4/ 9/4.5/2 9/4.5/2 9/4.5/2 9/4.5/ /.7.8/.7.8/..8/. 27 / 5 27 / 5 27 / 5 27 / 5 27 / 5 27 / 5 5/25 5/25 / / BA 5-2BA 5-4 2BA 5-2BA 5-2 2BA 5-5 2BA 5-8RA 4-8RA 47-8RA XS 27-2XS 27-2XS 27-2XS 27-2 open ends 5 mm Integrated 2-pin AMP open ends 5 mm Integrated 2-pin AMP

18 8 Side-marker light Side Side-marker light light with Side-marker light Side-marker light Side-marker light Side-marker light with reflex reflector with reflex reflex refl. refl. with reflex reflector with reflex reflector with reflex reflector with reflex reflector yellow hor. Yellow vert. rubber yellow hor. yellow vert. yellow hor. yellow vert. rubber housing housing Design Tech Tech Tech Tech Tech Tech Homologation ECE SM/SAE ECE SM/SAE ECE SM2 ECE SM2 ECE SM/SAE ECE SM/SAE Connectors and wiring EC angled mm AMP SS mm EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm EC angled mm AMP SS mm EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm AMP SS 25 mm, not overmolded. mm receptacles 25 mm Open ends 25 mm AMP SS 25 mm, not overmolded. mm receptacles 25 mm Open ends 25 mm EC angled mm AMP SS mm EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm EC angled mm AMP SS mm EC straight mm Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 2PS - 2PS -2 2PS - 2PS -4 2PS -5 2PS - 2PS - 2PS -7 2PS - 2PS -2 2PS - 2PS -4 2PS -5 2PS - 2PS - 2PS -7 2PS 2-2PS 2-2 2PS 2-2PS 2-2PS 2-2PS 2-2PS -25 2PS -2 2PS -27 2PS -28 2PS -29 2PS -24 2PS - 2PS - 2PS -25 2PS -2 2PS -27 Minimum order quantity for packaging index Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 8 / - 8 / - 8 / - 8 / - 8 / - 8 / - Number of LEDs Power consumption at.5v/28v [W].55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 / /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /. Dimensions (length / width / height in mm) 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/ /7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. Operating temp.: -4 + C Mounting system (=tape; 2= screw; =snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection, LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options available upon request

19 8 9 Side-marker light Side-marker light Side-marker light Side-marker light Side-marker light with reflex reflector with reflex reflector with reflex reflector with reflex reflector with reflex reflector yellow vert. red hor. red vert. red hor. red vert. rubber housing rubber housing rubber housing Tech Tech Tech Tech Tech ECE SM/SAE SAE SAE SAE SAE 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/5.5 8/4/ /7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7. 7.8/7.8/7..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 / PS -28 2PS -29 2PS -24 2PS - 2PS - 2PS - 2PS -2 2PS - 2PS -4 2PS -5 2PS - 2PS - 2PS -7 2PS 4-2PS 4-2 2PS 4-2PS 4-4 2PS 4-5 2PS 4-2PS 4-2PS 4-7 2PS -25 2PS -2 2PS -27 2PS -28 2PS -29 2PS -24 2PS - 2PS - 2PS PS 4-2 2PS PS PS PS PS 4-2PS 4- QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm EC angled mm AMP SS mm EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm EC angled mm AMP SS mm EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm EC angled mm AMP SS mm EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm EC angled mm AMP SS mm EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Open ends 5 mm Amphenol 5 mm SM (for all vehicle classes) = luminous intensity min. 4 cd, max. 25 cd SM2 (only for M classes) = luminous intensity min.. cd, max. 25 cd

20 Side-marker light yellow LH Side-marker light yellow RH Side-marker light yellow LH Side-marker light yellow RH Side-marker light yellow LH rubber housing Side-marker light yellow RH rubber housing Side-marker light red LH Side-marker light red RH Design Style Style Style Style Style Style Style Style Homologation ECE SM/SAE ECE SM/SAE ECE SM2 ECE SM2 ECE SM/SAE ECE SM/SAE SAE SAE Connectors and wiring AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm AMP SS 25 mm, not overmolded. mm receptacles 25 mm Open ends 25 mm AMP SS 25 mm, not overmolded. mm receptacles 25 mm Open ends 25 mm AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 2PS 5-2PS 5-2PS 5-5 2PS 5-7 2PS 5-2 2PS 5-4 2PS 5-2PS 5-8 2PS - 2PS - 2PS -5 2PS -2 2PS -4 2PS - 2PS PS PS PS 5-2PS 5-2 2PS PS 5-2PS 5-2 2PS 7-2PS 7-2PS 7-5 2PS 7-7 2PS 7-2 2PS 7-4 2PS 7-2PS 7-8 Minimum order quantity for packaging index 7 Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 8 / - 8 / - 8 / - 8 / - 8 / - 8 / - Number of LEDs Power consumption at.5v/28v [W].55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 / /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /. Dimensions (length / width / height in mm) 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/ /7.8/ /7.8/ /7.8/ /7.8/ /7.8/ /7.8/ /7.8/ /7.8/7. 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 25/4/5.5 Operating temp.: -4 + C Mounting system (=tape; 2= screw; =snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection, LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options available upon request

21 2 2 Side-marker light red LH Rubber housing Side-marker light red RH Rubber housing Direction indicator, side, cat. 5, side, cat. hor., side, cat. vert. LH, side, cat. vert RH Direction indicator, side, cat. 5 LH Direction indicator, side, cat. 5 RH side cat. LH side cat. RH Style Style Tech Tech Tech Tech Style Style Style Style Tech Style Style SAE SAE ECE ECE ECE ECE ECE ECE ECE ECE ECE/SAE ECE/SAE ECE/SAE Side reflex reflector Side reflex reflector LH Side reflex reflector RH 28.8/7.8/ /7.8/ /7.8/ /7.8/ /7.8/ /7.8/ /7.8/ /7.8/7. 2/4/8 8/4/25 8/4/25 8/4/25 8/4/25 8/4/25 8/4/25 8./4/8 8./4/8 99.8/4/ /4/ /4/ /4/25 /4/.5/4/.5/4/.55 /..55 /..55 /..55 /..55 /..55 /..55 /..55 /..7 / /.4.7 / / 22 / 22 / 22 / 22 / 22 / / 22 / 22 / 22 / PS PS PS PS 7-2PS 7-2 2PS PS 7-2PS 7-2 2BM - 2BM 7-2BM 7-2BM 7-2BM 7-5 2BM 7-4 2BM 7-2BM 8-2BM 8-2 2BM 9-2BM 9-2BM 9-2 2BM 9-4 8RA 4-2 8RA 47-8RA 47-4 AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm AMP SS 25 mm, overmolded. mm receptacles 25 mm Open ends 25 mm Amphenol 5 mm Open ends 5 mm Open ends 5 mm Integrated 2-pin AMP Open ends 5 mm Integrated 2-pin AMP Open ends 5 mm Integrated 2-pin AMP Open ends 5 mm Open ends 5 mm Open ends 5 mm Integrated 2-pin AMP Open ends 5 mm Integrated 2-pin AMP SM (for all vehicle classes) = luminous intensity min. 4 cd, max. 25 cd SM2 (only for M classes) = luminous intensity min.. cd, max. 25 cd

22 Position light small rear Position light small rear LH Position light small rear RH Tail light /stop light rear Tail light /stop light rear LH hor. Tail light /stop light rear RH hor. Tail light /stop light rear LH vert. Tail light /stop light rear RH vert. Tail light /stop light rear LH hor. Tail light /stop light rear RH hor. Tail light /stop light rear LH hor. Design Tech Style Style Tech Style Style Style Style Style Style Style Homologation ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE Connectors and wiring. mm receptacles 2 mm Open ends 25 mm Open ends 5 mm AMP SS 25 mm Open ends 25 mm Amphenol 25 mm AMP SS 25 mm Open ends 25 mm Amphenol 25 mm Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 2SA 2-2SA 2-2 2SA 2-2SA SA SA SA SA SA SB 4-2SB 42-2SB SB 42-2SB SB 99-2SB SB 99- Minimum order quantity for packaging index Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 48 / / / / / / / / / 54 B: 2 / 272 S: 52 / 54 B: 2 / 272 S: 52 / 54 B: 2 / 272 S: 52 / 54 B: 2 / 272 S: 52 / 54 B: 2 / 272 S: 52 / 54 B: 5 / S: 4 / B: 5 / S: 4 / B: 5 / S: 4 / Number of LEDs 24 / 24 / 24 / 24 / 24 / Power consumption at.5v/28v [W].5 /.5.5 /.5.5 /.5.5 /.5.5 /.5.5 /.5.5 /.5.5 /.5.5 /.5 B:.5 / 7. S:.7 /.5 B:.5 / 7. S:.7 /.5 B:.5 / 7. S:.7 /.5 B:.5 / 7. S:.7 /.5 B:.5 / 7. S:.7 /.5 B: 4.2 / 9. S:. /.7 B: 4.2 / 9. S:. /.7 B: 4.2 / 9. S:. /.7 Dimensions (length / width / height in mm) 2/4/8 2/4/8 2/4/8 8./4/2 8./4/2 8./4/2 8./4/2 8./4/2 8./4/2 49./4/ /4/ /4/ /4/ /4/25 89./4/25 89./4/25 89./4/25 Operating temp.: -4 + C Mounting system (=tape; 2= screw; =snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection, LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options available upon request

23 22 2 Tail light/stop light rear RH vert. Tail light/stop/ indicator light rear Tail light/stop/ indicator light rear LH hor. Tail light/stop/ indicator light rear RH hor. Tail light/stop/ indicator light rear LH vert. Tail light/stop/ indicator light rear RH vert. Direction Indicator yellow rear clear rear yellow rear LH hor. yellow rear RH hor. yellow rear LH vert. yellow rear RH vert. Style Tech Style Style Style Style Tech Tech Style Style Style Style ECE/SAE ECE ECE ECE ECE ECE ECE ECE ECE ECE ECE ECE 89./4/25 49./4/ /4/ /4/ /4/ /4/25 49./4/25 49./4/ /4/ /4/ /4/ /4/25 B: 4.2 / 9. S:. /.7 B:. /. S:. /.4 BL: 4. / 5. B:. /. S:. /.4 BL: 4. / 5. B:. /. S:. /.4 BL: 4. / 5. B:. /. S:. /.4 BL: 4. / 5. B:. /. S:. /.4 BL: 4. / / / / / / / 5. 4 / / 4 4 / / 4 4 / / 4 4 / / 4 4 / / 4 B: 5 / S: 4 / B: 82 / 8 S: / 5 BL: 4 / 9 B: 82 / 8 S: / 5 BL: 4 / 9 B: 82 / 8 S: / 5 BL: 4 / 9 B: 82 / 8 S: / 5 BL: 4 / 9 B: 82 / 8 S: / 5 BL: 4 / 9 7 / 8 7 / 8 7 / 8 7 / 8 7 / 8 7 / SB SD 4-2SD 42-2SD 42-2SD 42-2SD BA -2 2BA - 2BA -5 2BA - 2BA -7 2BA -8 Integrated -pin AMP SS Integrated 4-pin AMP SS Integrated 4-pin AMP SS Integrated 4-pin AMP SS Integrated 4-pin AMP SS Integrated 4-pin AMP SS ST = Stop light, TL = tail light, DI = direction indicator

24 clear rear LH hor. clear rear RH hor. clear rear LH vert. clear rear RH vert. rear LH hor. rear RH hor. rear LH hor. wiping R L rear RH hor. wiping L R rear LH hor. wiping R L rear RH hor. wiping L R Design Style Style Style Style Style Style Style Style Style Style Style Homologation ECE ECE ECE ECE ECE ECE ECE ECE ECE ECE ECE rear LH vert. Connectors and wiring Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 2BA - 2BA -2 2BA - 2BA -4 2BA - 2BA -2 2BA -5 2BA - 2BA -7 2BA -8 2BA - Minimum order quantity for packaging index 7 Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 7 / 8 7 / 8 7 / 8 7 / / / / / / / / 5 Number of LEDs Power consumption at.5v/28v [W] 2. / / / / 5..9 / 8.9 / 8.9 / 8.9 / 8.9 / 8.9 / 8.9 / 8 Dimensions (length / width / height in mm) 275.4/4/ /4/ /4/ /4/25 89./4/25 89./4/25 89./4/25 89./4/25 89./4/25 89./4/25 89./4/25 Operating temp.: -4 + C Mounting system (=tape; 2= screw; =snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection, LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options available upon request

25 24 25 rear RH vert. rear LH hor. rear RH hor. rear LH hor. wiping rear RH hor. wiping rear LH vert. rear RH vert. Style Style Style Style Style Style Style Tech Style Style Style Style ECE ECE ECE ECE ECE ECE ECE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE Reverse light Reverse light LH hor. Reverse light RH hor. Reverse light LH vert. Reverse light RH hor. 89./4/ /4/ /4/ /4/ /4/ /4/ /4/25 49./4/ /4/ /4/ /4/ /4/25.9 / 8.8 / / / / / / 2.5. /.. /.. /.. /.. / / 5 / 9 / 9 / 9 / 9 / 9 / 9 2 / 2 / 2 / 2 / 2 / 5 2BA -4 2BA 2-2BA 2-4 2BA 2-2BA 2-2 2BA 2-5 2BA 2-2ZR 44-2ZR - 2ZR - 2ZR - 2ZR -4 Integrated -pin AMP SS Integrated -pin AMP SS (with 2 pin function) Integrated -pin AMP SS (with 2 pin function) Integrated -pin AMP SS (with 2 pin function) Integrated -pin AMP SS (with 2 pin function)

26 Reverse light LH hor. (only with 2 modules) Reverse light RH hor. (only with 2 modules) Reverse light LH diag. (only with 2 modules) Reverse light RH diag. (only with 2 modules) Reverse light LH vert. (only with 2 modules) Reverse light RH vert. (only with 2 modules) Rear fog light Rear fog/reverse light Design Style Style Style Style Style Style Tech Tech Style Style Style Homologation ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE Rear fog light LH hor. Rear fog light RH hor. Rear fog light LH vert. Connectors and wiring Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS (with 2 pin function) Integrated -pin AMP SS (with 2 pin function) Integrated -pin AMP SS (with 2 pin function) Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 2ZR 4-2ZR 4-2 2ZR 4-5 2ZR 4-2ZR 4-2ZR 4-4 2NE 44-2NR NE - 2NE -2 2NE - Minimum order quantity for packaging index Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 24 / 7 24 / 7 24 / 7 24 / 7 24 / 7 24 / 7 7 / NES: 7 / ZR: 2 / 7 / 7 / 7 / Number of LEDs / 4 Power consumption at.5v/28v [W] / 2.8 NES: 2. / 2.8 ZR:. /. 2. / / / 2.8 Dimensions (length /width / height in mm) 99.8/4/ /4/ /4/ /4/ /4/ /4/25 49./4/25 49./4/ /4/ /4/ /4/25 Operating temp.: -4 + C Mounting system (=tape; 2= screw; =snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection, LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options available upon request

27 2 27 Rear fog light RH vert. Rear fog/ Reverse light LH hor. Rear fog/ Reverse light RH hor. Rear fog/ Reverse light LH vert. Rear fog/ Reverse light RH vert. Rear fog light LH hor. Style Style Style Style Style Style Style Style Style Style Style Tech ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE/SAE ECE ECE ECE ECE ECE ECE ECE/SAE Rear fog light RH hor. Rear fog light LH diag. Rear fog light RH diag. Rear fog light LH vert. Rear fog light RH vert. Reflex reflector rear 275.4/4/ /4/ /4/ /4/ /4/ /4/ /4/ /4/ /4/ /4/ /4/25 /4/ 2. / 2.8 NES: 2. / 2.8 ZR:. /. NES: 2. / 2.8 ZR:. /. NES: 2. / 2.8 ZR:. /. NES: 2. / 2.8 ZR:. / / 4 / 4 / 4 / 4 7 / NES: 7 / ZR: 2 / NES: 7 / ZR: 2 / NES: 7 / ZR: 2 / NES: 7 / ZR: 2 / 55 / / / / / / NE -4 2NR -2 2NR -22 2NR -2 2NR -24 2NE 4-2NE 4-2 2NE 4-5 2NE 4-2NE 4-2NE 4-4 8RA 4- Integrated -pin AMP SS (with 2 pin function) Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS Integrated -pin AMP SS FL = fog light, BL = back-up spotlight

28 Reflex reflector rear LH Reflex reflector rear RH Reflex reflector rear LH Reflex reflector rear RH Amber warning light yellow LH Amber warning light yellow RH Design element LH Design element RH Design Style Style Style Style Style Style Style Style Homologation ECE/SAE ECE/SAE ECE/SAE ECE/SAE SAE SAE Connectors and wiring no connector no connector Device number (Please add packaging index as the last number - Individual packaging or -7 Multiple-item packaging) 8RA 42-8RA RA RA 47-2XW 49-2XW XX 49-2XX 49-2 Minimum order quantity for packaging index Voltage range: 9V V Voltage range: 8V 2V Nominal voltage [V] Current flow at.5v/28v [ma] 47 / / 97 Number of LEDs Power consumption at.5v/28v [W] Dimensions (length / width / height in mm) 89./4/25 89./4/25.5/4/.5/4/ 89./4/25 89./4/25 89./4/25 89./4/25 Operating temp.: -4 + C Mounting system (=tape; 2= screw; =snap-ball-head bolt)* Mounting tolerance (+/- angle [ ]) HELLA specification HN7 class Polarity reversal protection Failure protection: current detection, LED off = all off Failure protection ISO7 Integrated short-circuit protection * Other fastening options upon request

29 28 29 CONNECTOR OVERVIEW The tables on the previous pages show you which connectors and which wiring belong to which Shapeline product. The following shows you what the different connector types look like.. mm receptacle Open ends QL - Quick Link Integrated AMP SUPERSEAL AMP SUPERSEAL EC - EasyConn straight/ angled Amphenol

30 ASSEMBLY INSTRUCTIONS FOR SIDE MARKER LIGHTS We offer you special installation angles for the simple assembly of the Shapeline side marker lights on the trailer chassis. The installation angles are available either individually or in combination with a side marker light, and are compatible with screw ball pin or snapping ball pin fixing systems. Specifically for trailers! Angle bracket for screw fixing system Angle bracket for ball pin fixing system Side marker light including angle bracket for screw fixing system OVERVIEW OF SIDE MARKER LIGHTS INCLUDING INSTALLATION ANGLES: Side marker light with reflex reflector Side marker light with reflex reflector Side marker light with reflex reflector Side marker light with reflex reflector Installation angle Installation angle Amber hor. Amber hor. Amber hor. Amber hor. for Shapeline groups of side marker light with reflex reflector Including installation angle Including installation angle Including installation angle Including installation angle (Tech), 2 (Tech), 5 (Style), (Style) for Shapeline groups of side marker light with reflex reflector (Tech), 2 (Tech), 5 (Style), (Style) Design Tech Tech Tech Tech Homologation ECE SM / SAE ECE SM / SAE ECE SM / SAE ECE SM / SAE Connectors and wiring EC straight mm QL mm. mm receptacles 2 mm Open ends 5 mm Part number 2PS -77 2PS PS -77 2PS HG 49-8HG Fixing system Screw fixing for installation angle Screw fixing for installation angle Screw fixing for installation angle Screw fixing for installation angle M5 screw fixing for the light Ball pin fixing for the light Other combinations of bracket/side marker light with reflex reflector are available upon request. More detailed information on the side marker lights can be found on pages 8-2.

31

32 HELLA GmbH & Co. KGaA Rixbecker Straße Lippstadt, Germany Tel.: Fax: Internet: HELLA Limited Unit Appletree Industrial Estate Chipping Warden Banbury, Oxon OX7 LL England, UK Tel.: (95) 24 Fax: hella.sales@hella.com Website: HELLA GmbH & Co. KGaA, Lippstadt 9Z J75/KB/5.8/.4 Printed in Germany Subject to technical and price modifications.