Hydraulic Power Units
|
|
- Rudolph Lee
- 6 years ago
- Views:
Transcription
1 Hydraulic ower Units D, H and V-ak Series Catalog /US
2 Introduction Vertical ower Units Series D, H, V-aks Quick Reference Data Chart ump ank Size ump Flow Electrical Maximum * Model No. allon (Liters) M 1725 RM Motors SI (ar) D-aks 5 (18.9) ( ).5 H H.. 3 (27) H-aks 1 (37.9), 2 (75.7), 3 (113.6), 4 (151.4) ( ).5 H H.. 3 (27) V-aks 1 (37.9), 2 (75.7), 3 (113.6), 4 (151.4) ( ) 2 H H.. 3 (27) * See pump/motor combination, maximum pressure charts. 1 arker Hannifin Corporation Hydraulic ump/motor Division
3 echnical Information Vertical ower Units Series D, H, V-aks Warranty he hydraulic components on these arker ower Units are warranteed for one year. his warranty may be extended to two years by using and properly maintaining arker filters. Installation Data: See Installation/ Maintenance Manual for specific recommendations pertaining to start-up, system cleanliness, fluids, temperature and other important factors relative to proper installation and use of these power units. Standard Features Vertical Design Submerged ump recision ump Mounting dapters Suction Strainer lycerine Filled ressure age with Shut Off Oil Level age with hermometer Relief Valve reather and Fill Cap SE Drain lug enefits Saves Floor Space Quieter Operation, Elimination of otential Leak oint Longer ump Life rotects ump from Contamination Improved Diagnostics Helps to Maintain rouble-free erformance rotects gainst System Shock Easy o Fill Reservoir revents Leaks Schematic Symbol (Hydraulic Schematic - asic Unit) O OION MNIFOLD NF D3 - D-K NF D5 - H-K O OION MNIFOLD NF D5 SE -12 M SRE REURN D & H-K SIC UNI NO OIONS OR CCESSORIES O OION MNIFOLD SE -12 M OMI OION COM CONROL SRE REURN V-K SIC UNI NO OIONS OR CCESSORIES OMI OION UM COMENSOR O OION MNIFOLD 2 arker Hannifin Corporation Hydraulic ump/motor Division
4 Installation Information Dimensions - asic D-ak (5 allon ank) Millimeter equivalents for inch dimensions are shown in (**). Vertical ower Units Filter Option Reference SRE REURN OR 1/2" NF WIH DRO IE Series D-aks.75 (19.1) 1.25 (31.8) 15. (381.) 13.5 (342.9) 12.5 (317.5).56 DI. MOUNIN HOLES - 4 LCES 1. (254.) SRE REURN OR 1/2" NF WIH DRO IE ELECRIC MOOR O & S3 OION MNIFOLD ( & LOCK & D3 SINLE SION) SHOWN WIH OION O REURN FILER 12.5 (317.5) SYSEM RELIEF VLVE.9 (22.9) O & S3 OION MNIFOLD ( & LOCK & D3 SINLE SION) SIC UNI RESSURE E WIH NEEDLE VLVE SRE REURN OR 1/2" NF WIH DRO IE O ( & LOCK) OR S3 ( D3 SULE) SHOWN-SEE MNIFOLD OIONS FILLER REHER 1.36 (263.1) 1.5 (38.1) (37.9) OIL LEVEL SIH E NK DRIN SE-12 (LUED).12 (3.1) M3* OION MNIFOLD (MULI-SION D3 MNIFOLD) SHOWN WIH OION O REURN FILER Motor Motor Description Dimension Code H-RM-Frame-hase U CZ (269.75) C CZ (295.15) CZ (295.15) CZ (258.57) F CZ (283.97) CZ (36.32) K CZ (341.38) 3 arker Hannifin Corporation Hydraulic ump/motor Division
5 echnical Information Vertical ower Units Series D, H, V-aks Manifold Options Millimeter equivalents for inch dimensions are shown in (**). SULY OR SE-1 REURN OR SE-1 SULY OR SE-1 REURN OR SE-1 REURN OR SE-1 D3 COVER LE OR SE-8 OR SE (87.4) 2.6 (52.3) REURN OR SE-1 D3 MN SURFCE OR SE-8 OR SE (31.8) UM SULY 1.75 (44.2) UM SULY 3.38 (85.9) 1.88 (47.8).87 (22.) 1.75 (44.5) O MNIFOLD OION FOR SULY & REURN CONNECIONS (5 L. RESERVOIR UNIS) S3 SULE OION FOR USE WIH D1VW VLVE (NF D3) SULY OR SE-12 REURN OR SE-12 SULY OR SE-12 REURN OR SE-12 REURN OR SE-12 REURN OR SE-12 UM SULY D5 COVER LE OR SE-1 OR SE (44.5) 2.12 (53.8) 1.75 (44.5) REURN OR SE-12 REURN OR SE-12 UM SULY D5 MN SURFCE OR SE-1 OR SE (31.8) 4.12 (14.6) -D3 -D5 -D3 -D5 1.5 (38.1) -D3 -D5 -D3 -D5.69 (17.5) 2.12 (53.8) O MNIFOLD OION FOR SULY & REURN CONNECIONS (1, 2, 3, 4 L. RESERVOIR UNIS) S5 SULE OION FOR USE WIH D3W VLVE (NF D5) 6 arker Hannifin Corporation Hydraulic ump/motor Division
6 echnical Information Vertical ower Units Series D, H, V-aks Manifold Options Millimeter equivalents for inch dimensions are shown in (**). SULY OR SE-12 REURN OR SE-12 REURN OR SE-12 UM SULY REURN OR SE-12-4 Y Y -4 D5H(E) RNS LE OR SE-1 OR SE (31.8) SE-6 UM SULY REURN OR SE-1 D3 MN SURFCE & ORS SE-8 (U O 5 SIONS) 1.31 (33) - DO5HE Y - DO5H - DO5H Y - DO5HE 2.13 (54.1) ER SION -D3 -D5 -D3 -D5 1.5 (38.1) 4.25 (17.9) U O 5 SIONS 2.12 (53.8).69 (17.5) 2.12 (53.8).88 (22.4) 1.75 (44.5) 1.6 (26.9) S6 SULE OION FOR USE WIH D31VW VLVE (NF D5H(E) WIH & Y ORS) M3* MULISION MNIFOLD OION FOR USE WIH D1VW VLVE (NF D3) REURN OR SE-12 REURN OR SE-16 SE-6 D5 MN SURFCE & ORS SE-8 (U O 5 SIONS) 1.25 (31.8) SE-6 D5H MN SURFCE & ORS SE-12 (U O 5 SIONS) 1.32 (33.5) UM SULY UM SULY 3.25 (82.6) ER SION 3.25 (82.5) ER SION 6.5 (165.1) U O 5 SIONS 3.25 (82.6) 6.5 (165.1) U O 5 SIONS 3.25 (82.5) 1.56 (39.6) 1.62 (41.1).69 (17.5) 2.12 (53.8).63 (16.) 2.25 (57.2) M5* MULISION MNIFOLD OION FOR USE WIH D3W VLVES (NF D5) M6* MULISION MNIFOLD OION FOR USE WIH D31VW VLVES (NF D5H, NO & Y ORS) (2, 3, 4 LLON UNIS) 7 arker Hannifin Corporation Hydraulic ump/motor Division
7 echnical Information Vertical ower Units Series D-aks Dimensions - D-ak (5 allon ank) ccessories Millimeter equivalents for inch dimensions are shown in (**). SRE REURN OR 1/2" NF WIH DRO IE SRE REURN OR 1/2" NF WIH DRO IE (NO SHOWN) OU.78 (19.8) OION C WER/OIL HE ECHNER (1" NF ORS) 3. (76.2) 4.4 (111.8) OION E WER EMERURE MODULIN VLVE (3/4" NF ORS) 1.7 (43.2) 5.1 (129.5) REF. OION J IMMERSION HEER (1/2" ELEC. CONN.) IN OION W1 OR W2 RESSURE SWICH (DIN 4365 CONN.) OION M OR O REURN FILER OION 1 IR/OIL HE ECHNER 2.6 (66.) OION M OR O REURN FILER OION R1 OR R2 FLO/EM SWICH (1/2" ELEC. CONN.) DIM REF OION H RESSURE FILER FLO 1/2" ELOW LOW LEVEL 4. (11.6) 4.88 (124.) 1.25 (31.8) 1.4 (35.6) (38.1) (66.) 5.8 (147.3) 1 arker Hannifin Corporation Hydraulic ump/motor Division
8 echnical Information Vertical ower Units Series D, H, V-aks erformance Data Maximum Working ressures **** Represents maximum operating pressure with pump/motor combination. his will be the maximum relief valve or compensator setting. **** Represents maximum operating pressure with pump/motor combination. When used on power unit products this will represent a 3 SI relief valve or compensator setting. D & H-ak - ump/motor Combinations Maximum Operating ressure ump Code Motor Horsepower Flow at RM Max Operating ressure (heoretical) V-ak - ump/motor Combinations Maximum Operating ressure Motor Horsepower ump 1725 RM V V V V V V V V V V V V V V V V V V V V V V V V V V arker Hannifin Corporation Hydraulic ump/motor Division
9 echnical Information erformance Data umps 18 RM Volumetric Efficiency 2 2 Standard umps Vertical ower Units 18 RM Series D, H, V-aks Volumetric Efficiency 1 Delivery M Horsepower H Outlet Flow [ ] Overall Efficiency ressure - SI Input Horsepower at Full Flow Compensated Horsepower NOE: he efficiencies and data in the graph are good only for pumps running at 18 RM and stroked to maximum. o calculate approximate horsepower for the other conditions, use the following formula: H = Q x (SI) N + (CHp) x ctual M is directly proportional to drive speed and maximum volume setting. Flow loss, however, is a function of pressure only Efficiency - % Delivery M Horsepower H Overall Efficiency Outlet Flow Input Horsepower at Full Flow Compensated Horsepower ressure - SI WHERE: Q = ctual Output Flow in M SI = ressure t ump Outlet CHp = Input Full 18 RM (from graph read at operating pressure) N = Drive Speed in RM Efficiency - % Horsepower Limited umps 8 18 RM 2 18 RM Outlet Flow (M) C D E C ressure - SI F D E F Horsepower H Input orque (In.-Lb.) Outlet Flow (M) C D E ressure - SI D E C Horsepower H Input orque (In.-Lb.) V16 FULL SROKE MOOR H Compensator Setting (SI) V33 FULL SROKE MOOR H Compensator Setting (SI) ump Control Option H with V16 Horsepower Limiting Factory Compensator Settings ump Control Option H with V33 Horsepower Limiting Factory Compensator Settings 14 arker Hannifin Corporation Hydraulic ump/motor Division
10 echnical Information Vertical ower Units Series D, H, V-aks erformance Data Heat Exchangers Horsepower Removed y Cooler ir/oil Heat Exchangers, 1 & 2 used with 18 RM EFC Motors 1* ump Case H. E. with 56C-256C Motors 1* - Return Line H. E. (D5 ower Units Only) 1 - Return Line H. E. with 56C-184C Motors 2 - Return Line H. E. with 213C-256C Motors Heat removal is based on 4 F differential between transfer medium Oil Flow - M Oil ressure Drop at 1 SSU = 5 SI = 1 SI = 2 SI 1 Water/Oil Heat Exchangers C (1:1 Oil/Water Ratio) D (2:1 Oil/Water Ratio) 8 Horsepower Removed y Cooler C D 1.5 C - Return Line H. E. (9 M Max.) D - Return Line H. E. (4.5 M Min.) Heat removal is based on 4 F differential between transfer medium, using 85 F cooling water. he Oil/Water ratio of 2:1 means that for every 2 gallons of oil through the cooler, a minimum of 1 gallon of 85 F water must be circulated to achieve curve results Oil Flow - M Oil ressure Drop at 1 SSU = 5 SI = 1 SI Horsepower Removed y Reservoir H REMOVL RESERVOIR SIZE (LLONS) Heat removal is based on static ambient air at 85 F and max. oil temperature of 135 F. 15 arker Hannifin Corporation Hydraulic ump/motor Division
11 Ordering Information Vertical ower Units Series D-aks D-aks Omit If Not Required W Omit If Not Required Reservoir ressure ump No Motor Electric Manifold Control Flow (See Note) Motor ** Ordering Code Reservoir Size (allons) D5 5 Ordering Code Omit ressure Control Description System ressure Relief Valve Only System ressure Relief Valve with Unloading Valve (2-Way 12VC) Note: wo and three pressure control options with unloading valve available, consult factory. Ordering Code Motor Description (H-RM-Frame-hase) U CZ - 1 C CZ CZ CZ - 3 F CZ CZ - 3 K CZ - 3 Single phase electric motors are rated as follows: 115/23V, 1H, EFC - 6 Hertz Operation hree phase electric motors are rated as follows: 2-23/46V, 3H, EFC - 6 Hertz Operation 19-22/38-44V, 3H, EFC - 5 Hertz Operation Consult factory for other motor speeds (RM) and voltages. ** Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent. Motor coupling will have interface for a 56C frame motor. Ordering Code ump Used.6 Z1R13.9 Z1R2 Comments 1.2 Z1R27 vailable With.5H 1.8 Z1R41 hru 3 H Motors Only 2.3 Z1R Z1R61 Ordering orting lock/subplate Supply/Return ort Code or Manifold ype or ctuator ort Size O S3 M3 * Other ressure and Return ort lock & orts Convertible to with Safety Relief Valve SE-1 Str. hr d S3 Option D3 Single Station Subplate & orts Spare & with Safety Relief Valve SE-8 Str. hr d SE-1 orts D3 Multistation arallel Circuit Manifold & orts Spare ort with Safety Relief Valve SE-8 Str. hr d SE-6 * When ordering Multi-Station Manifolds, the number of stations must be specified. If more than 5 stations required, consult factory. If valves are to be mounted, specify the valves and sequence. If the model code exceeds 25 digits, utilize the special ordering code. Example: D M33 NOE: = 3 Station Manifold Manifolds are mounted vertically. Station #1: ottom station is number 1. Station #2: Station #3: C4 16 arker Hannifin Corporation Hydraulic ump/motor Division
12 Ordering Information Vertical ower Units Series D-aks D-aks Omit If Not Omit If Not Omit If Not Omit If Not Not Required Required Required Required Required When Ordering Directional Manapak ccessories Special Modifications Design Series Control Valve Control Valves Indicates Special Modification Has een Specified Ordering Code Ordering Code Valve NF Nominal Function Model Mounting Flow Number ad (M) Flow Control ilot Operator Check ort Check ort ressure RM225KN Reducing (15-3) FM2DDKN D3 7 COM2DDN D3 7 CM2N D3 7 D3 6 Valve NF Nominal Solenoid Model Mounting Flow Operator Number ad (M) -11 VC D1VW2NYCF D3 7 D1VW1CNYCF D3 7 C D1VW4CNYCF D3 7 D D1VW2DNYCF D3 7 Single (Spr. Ret) Double (Spr. Ctr) Double (Spr. Ctr) Double (Detent) Circuit Symbol Circuit Symbol Ordering Function Model echnical Code Number Data 1* ir/oil:.7h Return Heat RM M Exchanger (5 SI 3 M) Oil/Water (1:1): 3H C* Return Heat 3 M N414 Exchanger (9 M Max.) (5 SI 3 M) Water emp. 75 F to 135 F dj. Range E Modulating V47C-6 Cross mbient Sensing Valve 3/4" N Inlet H J K L M ressure Filter Immersion Heater Check Valve ump Outlet ypass Check (On Heat Exch.) Return Filter 1511RS E2-251-L D37MOMF5 C12S65 15CN11 Microglass Element Vis. Ind. - 5 SI ypass (2 SI 3 M) 25 Watt, 12 V, 1H, 12 F Fixed hermostat NEM 4 (2.1 mps) 5 SI Cracking ressure (7 SI 3 M) 65 SI Cracking ressure Microglass Element Visual 25 SI Indicator (3 SI 3 M) O Cellulose Element Return 121C Ind. age - 15 SI ypass Filter (12 M Max. Oil Flow) Combination Fixed emp at 149 F R1 Float/emp. SW * Low Level N.O. Float Up nd/or 149 F (N.O.) Combination Fixed emp at 15 F R2 Float/emp. SW * Low Level N.O. Float Up nd/or 15 F (N.C.) W1 W2 ressure Switch 9-7 SI ressure Switch 7-3 SI D34FCHC D54FCHC N.O. & N.C. Contacts (SD Switch) DIN 4365 Connector 125/25VC Induct 12/25VDC Induct * Heat rejection based on flow given with a 4 F differential between transfer medium. N Cover late D3 S D1VW2CNYCF D3 7 D1VW8CNYCF D3 7 Double (Spr. Ctr.) Double (Spr. Ctr.) 17 arker Hannifin Corporation Hydraulic ump/motor Division
13 Installation Information Vertical ower Units Series D, H, V-aks Operating Notes Jog the electric motor once and verify that the electric motor is rotating in the same direction as the arrow on the electric motor housing. If direction is incorrect, reverse two of the three leads on a 3-phase electric motor. D & H-ak power units are tested and relief valve is set at maximum pressure of the pump/motor combination. V-ak power units are tested and pressure control valves are factory preset. If adjustments are needed, follow the procedure below: egin adjusting relief valve and pump compensator control valve to increase pressure gradually. (NOE: lways set relief valve 25 SI higher than pump compensator pressure control valve or severe overheating will occur.) If pump fails to prime, vent pump discharge to atmosphere to establish fluid flow. Reservoir temperature should not exceed 15 F. System reliability and component service life will be reduced when system is operated at higher temperature. Clean fluid = improved system reliability and longer component service life, change filter elements whenever filter indicators indicate a dirty element condition. 24 It is recommended that every 4, operating hours or once a year, whichever occurs first, the filler/ breather cap and suction strainer should be replaced. Fluid Recommendations remium quality hydraulic oil with a viscosity range between SSU (3-5 cst.) at 1 F (38 C). Normal operating viscosity range between 8-1 SSU (17-18 cst.). Maximum start-up viscosity is 4 SSU (1 cst.). NOE: Consult arker when exceeding 16 F (71 C) operation. Oil should have maximum anti-wear properties, rust and oxidation treatment. Filtration For maximum pump and system component life, the system should be protected from contamination at a level not to exceed 125 particles greater than 1 microns per milliliter of fluid. (SE Class 4 / ISO 16/13.) Due to the nature of variable displacement pumps, variations in pump inlet conditions, fluid acceleration losses, system aeration, and duty cycle must be carefully considered before specifying suction line filtration. Contact your arker representative for assistance. NOE: For additional information refer to ulletin No. I26-55/N. arker Hannifin Corporation Hydraulic ump/motor Division
14 echnical Information ump Mounting dapters he totally enclosed pump mounting bracket offers precision shaft alignment and safety from the rotating shafts and coupling. he bracket is designed to mount on the motor face with the motor coupling half secure to the shaft. hen the pump, with its coupling half secure on the pump shaft, is mounted and the coupling halves are engaged. his will require proper spacing of the coupling prior to installation and a coupling with an outside diameter less than dimension. If the coupling selected cannot be assembled this way, both coupling halves must be installed on the motor shaft. Next, mount the adapter on the motor. hen the pump can be mounted and the coupling secured to the pump by using the access slot to tighten the pump shaft coupling set screw. Dimensions* ump Mounting dapter SYLE 1 DER (SEE CHR FOR MOUNIN ORIENION) CCESS SLO M DI HRU EQULLY SCED ON C1 DI..C. (4 LCES) 45 CCESS SLO SYLE 2 DER (VERICL MOUN ONLY) M DI HRU EQULLY SCED ON C2 DI..C. (4 LCES) 45 DI. D DI. DI. DI. DI. D DI. DI. DI. FCE O FCE FCE O FCE (56C FRME) H HRED 2 LCES FCE O FCE M DI HRU EQULLY SCED ON C1 DI..C. (4 LCES) H HRED 2 LCES Model ump Motor C1 C2 D Face to Vertical Horizontal H M Number Mounting Mounting Face Mounting Mounting Style Weight SE 56C N/ / YES YES 1 3 lb SE 182C/256C N/ / YES YES 1 4 lb SE 56C N/ / YES YES 1 4 lb SE 182C/256C N/ / YES YES 1 4 lb SE 182C/256C N/ / YES YES 1 5 lb SE 182C/256C / YES NO 2 7 lb SE 182C/256C / YES NO 2 8 lb SE 182C/256C N/ / NO YES 1 7 lb SE C 182C/256C N/ / NO YES 1 2 lb. * ll dimensions are in inches. NOE: It is the responsibility of the user to check the listed dimensions to ensure suitability of mounting adapter with pump/coupling/motor combination. 25 arker Hannifin Corporation Hydraulic ump/motor Division
15 Offer of Sale Conversion Equations pplication Formulas 1 M at 15 SI = 1 H (eneral Rule) 1 allon = 231 Cubic Inches ( Liters) 1 H = 42.4 U/Min. 1 allon = Liters 1 allon Oil = 7.8 Lbs. 1 bar = 14.5 SI 25.4mm = 1 Inch H = M x SI 1714 x ump Efficiency SI = 1714 x ump Efficiency x H M M = 1714 x ump Efficiency x H SI H = orque (in.-lbs.) x RM 6325 orque = H x 6325 RM RM = H x 6325 orque Motor Information t 44V 3-hase Motor Draws 1.25 M/H t 22V 3-hase Motor Draws 2.5 M/H t 11V Single hase Motor Draws 1 M/H 26 arker Hannifin Corporation Hydraulic ump/motor Division
Hydraulic Power Units
Catalog HY13-1552-001/N,EU Vertical ower Units Volume Control Hydraulic ower Units D, H and V-ak Series Catalog 2600-500-1/US 15 arker Hannifin Corporation Hydraulic ump/motor Division Greeneville, ennessee
More informationHydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US
More informationHydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: July 01,
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US
More informationHydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: Mar 31,
Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US Effective: Mar 31, 2016 WRNING - USER RESONSIILIY FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS DESCRIED HEREIN OR RELED
More informationPower Units. H-Pak & V-Pak. V-Pak Low Profile. Performance Data
ower Units H-ak & V-ak H-ak and V-ak style power units are ideal for many industrial applications. These space saving vertical style units are available with gear or piston pumps and are designed for quiet
More informationPower Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial
Power Units Page (M) = Mobile (I) = Industrial () = Mobile & Industrial (I) 143-144 (I) 145-152 (I) 145-152 (I) 145-152 Power Units (Industrial) D-Pak 5 Gallon D-Pak style power units are ideal for many
More informationHydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire
ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are
More informationDirectional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are
More informationDirectional Control Valves
echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available
More informationDirectional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationDirectional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and
More informationZE3 & ZE4 Electric 1 & 1 1/2 HP Pump Series
ZE3 & ZE4 Electric 1 & 1 1/2 H ump Hydraulic echnology Worldwide Shown from left to right: ZE334M-K, ZE411D-FHR he New Standard for Industrial pplications, Z-Class ll models in the chart below are the
More informationOperation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-252/US Introduction pplication arker D3 Series hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3 position. hey are manifold mounted
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US echnical Information General Description Series D1VW directional control
More informationManapak Sandwich Valves. General Description
echnical Information Series RM General Description RM Series relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. With D3 size, they can also be configured
More informationMotors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationBankable Control Valves
Hydraulics ankable Control Valves Catalog 3123/US Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves WRNING USER RESONSIILIY FILURE OR IMROER SELECION
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationDirectional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves LH WRNING USER RESONSIILIY FILURE OR IMROER
More informationSérie D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
More information250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
More informationBar 35 PSI 500. Pressure Drop L/M GPM. Flow
NF D3 O E R I N G N D E C H N I C L D RINGS Maximum Flow... See Chart Maximum Operating ressure (, and orts)... 3 ar ( SI) Maximum ank Line ressure... 13 ar (1 SI) Mounting attern... ISO 441--3-4-, NF-D3
More informationDirectional Control Valves
Frequently sked Questions Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It provides
More informationPart Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationVALVES INTRODUCTION. DIRECTIONAL CONTROL VALVES SELECTION GUIDE 2 or 3 way for single-acting cylinders or tools. FULL SYSTEM CONTROL
INRODUCION VLVES FULL SYSEM CONROL Hydraulic valves are devices that control different aspects of your hydraulic system's operation. he most common types of valves are directional control valves, flow
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationVariable Displacement Piston Pumps. Performance Information. Features. Specifications. Controls. Schematic Symbol (Basic Pump) Weight and Package Size
Catalog HY13-1552-2/US Technical Information Series PVC65 Performance Information Series PVC65 Compensated, Variable Volume, Piston Pump Features High Strength Cast-Iron Housing uilt-in Supercharger High
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationDirectional Control Valves Series D111VW. General Description. Features. Performance Curves
Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional
More informationSuper Charged Piston Pumps Variable Displacement For Open Circuits. PAVC Medium Pressure
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding PAVC Medium Pressure Super Charged Piston Pumps Variable Displacement
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1
More informationSECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES
SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he
More informationFunctional Description
Under Oil ower ack SA 01 p max 250 bar Q max 17 l/min HA 7111 07/2014 Replaces HA 7111 12/2009 Small compact power packs used in lifting platforms, ramps and other applications 3 basic hydraulic circuits
More informationRA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationFunctional Description HA /2008. Hydraulic Power Units SMA 05. Replaces HA /2007. p max up to 250 bar Q max up to 17 L/min
Hydraulic ower Units S 05 p max up to 250 bar Q max up to 17 L/min H 7212 6/2008 Replaces H 7212 10/2007 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine
More informationPRESSURE SWITCH 1PS / 1PF / 1PT
RESSURE SWICH 1S / 1F / 1 Ref. No. 98 Release 7/2 1 Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available,
More informationDirectional Control Valves
Frequently sked Questions N-1 Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It
More informationp max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationHigh Pressure, High Flow Rate Modular Valves
eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such
More informationMB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
More informationSeries Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
More informationRPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.
REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding
More informationLOW PROFILE POWER UNITS 10 to 30 Gallon Reservoir Capacity L O W P R O F I L E P O W E R U N I T S
OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity O W R O F I O W R U N I S 74 OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity ow rofile ower Units are designed for use in locations where space is at a
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data
More informationD03, D05 & D08 SERIES
INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged
More informationProportional Valves. Proportional Two-Stage Directional Valves
VICKERS roportional Valves roportional Two-Stage Directional Valves KHDG5V-5/7, 1 Series ressures to 3 bar ( psi) This product has been designed and tested to meet specific standards outlined in the European
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
DIRECIONL VLVE OERION Directional Valve Features, Selection and Operating Recommendations CONC INFORMION US Headquarters Dynex/Rivett Inc. 770 Capitol Drive ewaukee, WI 3072 U.S.. el: 262-69-2222 FX: 262-69-032
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More information"G" SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) "G" SERIES SHOCKLESS TYPE
"G" SRIS SHOCKLSS Y NOID ORD DIRCIL VLVS G-DSG-1/3 (1/, 3/) "G" SRIS SHOCKLSS Y NOID CROLLD ILO ORD DIRCIL VLVS G-DSHG-/ (1/, 3/) Mounting Up to 5 Ma (33 SI), 5 L /m in (.1 U.S.GM) ub. C-5 DIRCIL CROLS
More informationProportional pressure reducing valve of 3-way design
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Electric Drives and Controls Hydraulics Linear Motion and ssembly echnologies neumatics
More information8000 Series Open Loop Pumps
Table of Contents Features and enefits 2 Specifications 3 Shaft Torque Ratings 4 Pressure Pick-ups 4 Controls Pressure Compensator 5 Dual Pressure Compensator 5 Soft Start Pressure Compensator 6 Load Sensing
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
More informationDirectional control valves, pilot-operated, with electrical position feedback and integrated electronics (OBE) Type 4WRDE. Contents.
Directional control valves, pilot-operated, with electrical position feedback and integrated electronics (OE) ype 4WRDE RE 997 Edition: 6-5 Replaces: 99 (NG and NG6) Sizes and 6 Component series 6X Maximum
More informationProduct Tips and Features
2.00.01 02/2002. Manifolds & Valve acks roduct ips and Features apping lates apping lates are sandwich adapters designed to provide a means to easily take pressure readings from the work ports. 1. Standard
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationAccumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10
ccumulator shut-off block ype 0532VW RE 5012 Edition: 2016-06 Replaces: 07.10 Nominal diameter DN20, DN32 Component series 1 Maximum operating pressure 330 bar [400 psi] H7559 Features Ready for connection
More informationSuper Charged Piston Pumps Variable Displacement For Open Circuits. PAVC Medium Pressure
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding PAVC Medium Pressure Super Charged Piston Pumps Variable Displacement
More informationCTSN-4 Content Sectional Directional Control Valves
SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1 For Mobile
More informationProportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE
RE 29 184/12.02 Replaces: 12.98 roportional pressure reducing valve of 3-way design ypes 3DRE and 3DREE Nominal size 6 Series 2X Maximum operating pressure 100 bar Maximum flow 15 L/min H//D 5735/97 ype
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
More informationHydraulic Remote Control with STC Port Option Technical Focus
2 2 3 4 2 Hydraulic Remote Control with SC ort Option echnical Focus HRC HRC2-2 HRC2-R HRC2-S HRC4-J able of Contents General Description...4 SC erformance Characteristics...5 How to Use...6 Operating
More informationDIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures
HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG
More informationElectric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
More informationPressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
More informationMB-2 Chapters Monoblock Directional Control Valves
M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial
More informationSandwich Bodies TECHNICAL PRODUCT INFORMATION
Sun offers sandwich and subplate mounted bodies for most of its cartridge functions. hese mounting configurations are complete circuit elements that mount under directional control valves. Similar to other
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationCatalog Little Champ Hydraulic Power Units
Catalog Little Champ Hydraulic Power Units 3 AND 5 Gallon Capacity General Specifications/Table of Contents Little Champ Power Units are designed for use in locations where space is limited and larger,
More information