Bankable Control Valves

Transcription

1 Hydraulics ankable Control Valves Catalog 3123/US

2 Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS CN CUSE DEH, ERSONL INJURY ND ROERY DMGE. his document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. he products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. he items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. his offer and its acceptance are governed by the provisions stated in the "Offer of Sale". Copyright 1998,, ll Rights Reserved bvcover.pm65, dd, jk Offer of Sale Hydraulics II Elyria, Ohio US

3 Catalog 3123/US Contents ankable Control Valves Series V echnical Information... 1 erformance Curves... 2 Dimensions... 3 Ordering Information Series V06 Inlets...6 echnical Information... 6 Dimensions Ordering Information... 9 Series V06 Stack-On Valves...10 echnical Information Ordering Information Series V ssembled Valves ssembly Configurations Stacking Kit and Configurations Ordering Information Series V echnical Information Specifications Construction Views erformance Curves echnical Information Dimensions Ordering Information Series V18 Inlets...33 echnical Information Dimensions Ordering Information Series V18 Stack-Ons...36 echnical Information Series V18 End lates...42 echnical Information Ordering Information ssembled Valves...45 ssembly Configurations...46 Ordering Information...47 Series VCS echnical Information erformance Curves Dimensions Ordering Information Series V...52 Installation Data Cavity Details No. 8 and 9 Size Cavity Details No. 10 and 12 Size Offer of Sale...55 bvcover.pm65, dd, jk Hydraulics III Elyria, Ohio US

4 HIS IS LNK GE

5 Catalog 3123/US echnical Information ankable Control Valves Series V06 General Series V06 ankables are 2 or 3 position, 4-way, solenoid operated directional control valves. hey provide a spool valve that can be used either individually or in multiple spool banks. V06 bankable valves have auxiliary banking sections that can be mounted to provide auxiliary functions such as an inlet relief or unloading function. In addition, stack-on sections can be mounted on the cylinder port face of the V06 bankable valve spool sections to provide additional functions such as crossover reliefs, cylinder port reliefs,.o. checks, flow controls, and counterbalances. V06 valves can be used to create custom, multi-functional circuits. Features High flow capacity with reduced space requirements. High back pressure; all ports withstand maximum working pressure. recision machined valve body is made from high tensile cast iron. Six different spool styles are available. vailable operators include single or double solenoids. ll solenoids are a one-piece coil featuring numerous voltages and terminations. Operation he spool is shifted from its center position by energizing one of the solenoids. hree-position spring centered and two-position spring offset valves are available. Specifications Nominal Flow (at 70 SI ) LM (6-10 GM) depending on spool Maximum Inlet & arallel: 210 ar (3000 SI) Inlet ank ressure 210 ar (3000 SI) ank Series: 210 ar (3000 SI) Inlet & ank orting SE -6 Maximum Internal Leakage #1 Spool: 82 cc per land/min. (5.00 cu. in. per 210 ar (3000 SI) #2 Spool: 164 cc per land/min. (10.01 cu. in. per land/min.) (110 SSU oil) #4 Spool: 82 cc per land/min. (5.00 cu. in. per land/min.) #8 Spool: 82 cc per land/min. (5.00 cu. in. per land/min.) #11 Spool: 164 cc per land/min. (10.01 cu. in. per land/min.) Operating emperature Nitrile: -40 C to +93 C (-40 F to +200 F) Range (mbient) Fluorocarbon: -32 C to +121 C (-25 F to +250 F) Material ody: recision machined and honed from cast iron. Spool: Hardened and ground steel. Filtration Mounting osition Mounting ype ISO 16/13, SE Class 4 or better No restrictions Individually or line mounted bv06.p65, dd, jk Hydraulics 1 Elyria, Ohio US

6 Catalog 3123/US erformance Curves ankable Control Valves Series V06 Switching Limits Flow (Q) GM LM , 11, , 8 1, 4, 11, , 20 Notes: 1. Unless otherwise specified, all curves were generated using solenoid actuators at 90% of rated with voltage. 2. ll valves tested using 110 SSU oil ar 0 SI Operating ressure Differential ressure ressure Drop ( ) SI ar Spool No./ 1, S2, S8, Flow Direction S24 Spool to or Shifted or to Spool to 2 Centered or to 3 Note: Flow in center position for spool 11 as compared to 4 is 7% of the nominal flow. 0 LM GM Flow (Q) Solenoid Coil Specifications Solenoid Nominal Voltage/Hz In Rush mps Holding mps Wattage D VDC Not pplicable D VDC Not pplicable VC (Rectified Coil) Not pplicable 30 Solenoid Response imes DC COILS ressure Response Full Shift Spool Coil ype ull In Drop Out Drop Out 1 12 VDC, 30 Watt 30 ms 73 ms 244 ms 2 12 VDC, 30 Watt 20 ms 10 ms 134 ms 4 12 VDC, 30 Watt 23 ms 41 ms 287 ms 8 12 VDC, 30 Watt 26 ms 13 ms 136 ms VDC, 30 Watt 19 ms 22 ms 200 ms VDC, 30 Watt 17 ms 6.9 ms 244 ms VDC, 30 Watt 30 ms 73 ms 244 ms VDC, 30 Watt 30 ms 73 ms 244 ms VDC, 30 Watt 26 ms 13 ms 136 ms bv06.p65, dd, jk Hydraulics 2 Elyria, Ohio US

7 Catalog 3123/US Dimensions ankable Control Valves Series V06 *Inch equivalents for millimeter dimensions are shown in (**) Double Solenoid 45.0 (1.77) 63.5 (2.50) 25.4 (1.00) 1/4-20 UNC-2 x 11/16 (7.5) deep -4 places 12.7 (0.50) 38.1 (1.50) #6 SE 6.4 (0.25) (8.44) Solenoid ube 20 N.m. (180 in.-lbs.) orque 6.4 (0.25) 50.8 (2.00) 24.6 (0.97) 51.6 (2.03) 47.6 (1.88) 31.8 (1.25) 7.0 (0.28) Single Solenoid Extended ush ype Manual Overrides Furnished 15.9 (0.63) 10.7 (0.42) 34.9 (1.38) 11.4 (0.45) (5.46) bv06.p65, dd, jk Hydraulics 3 Elyria, Ohio US

8 Catalog 3123/US Ordering Information ankable Control Valves Series V06 Spool Sections V 06 ankable Valves Size Spools Seals LM (6 GM) Nominal Flow Omit V Nitrile Fluorocarbon Symbol S2 S8 S LM (8 GM) Max. Flow* without Malfunction; arallel Circuit Only 22.7 LM (6 GM) Max. Flow* without Malfunction; arallel Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; arallel Circuit Only 22.7 LM (6 GM) Max. Flow* without Malfunction; arallel Circuit Only 22.7 LM (6 GM) Max. Flow* without Malfunction; arallel Circuit Only 30.0 LM (8 GM) Max. Flow* without Malfunction; arallel Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; Series Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; Series Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; Series Circuit Only *t 70 SI ) ) ) Note: Maximum of six spools per assembly. For each additional spool repeat spool option after stack-on option. ) Note: Standard setting GM, with screw adjustments on all relief cartridges. Standard setting 1000 crack, with screw adjustments on all counterbalance cartridges. bv06.p65, dd, jk Hydraulics 4 Elyria, Ohio US

9 Catalog 3123/US Ordering Information ankable Control Valves Series V06 Coil ermination Coil Voltage ody D012 D VDC; 30 Watt 24 VDC; 30 Watt 120 VC; 30 Watt D V SV S1V W W DIN lug Face (C or DC) SE Double Spade, Vertically-Oriented (DC Only) Double 8-32 Screw & Nut Vertically-Oriented (DC Only) Single 8-32 Screw & Nut Internally Ground, Vertically-Oriented (DC Only) Double Wire 24" Class H (DC Only) Weather ack Connector, 5" Leads, Male Connector (DC Only) 6 Individual ody with 9/16-18 SE Straight hread orts 6F Individual ody with 9/16-18 SE Straight hread orts & Mounting Feet E6 Inlet/Outlet arallel ody with 9/16-18 SE Straight hread orts M6 Middle arallel ody with 9/16-18 SE Straight hread orts SM6 SI6 SO6 Series Middle ody with 9/16-18 SE Straight hread orts Series Inlet ody with 9/16-18 SE Straight hread orts Series Outlet ody (No Spool) Service arts odies Spools V06-6 arallel or Series Individual ody /N Spool V06-E6 arallel Inlet/Outlet ody /N Spool V06-M6 arallel Middle ody /N Spool V06-SI6 Series Inlet ody /N Spool V06-SM6 Series Middle ody /N Spool V06-SO6 Series Outlet ody (No Spool) /N Spool /N S2 Spool Coils /N S8 Spool /N ****** Double Spade Coil /N S24 Spool /N ****** Double Wire Coil /N ****** Double Screw Coil /N ****** Single Screw Coil /N ****** DIN lug Face Coil (C or DC) /N Weather ack Coil Note: Coils are available in 12 VDC, 24 VDC, & 120 VC versions only. /N VDC is a 12 VDC Double Wire Coil. ube ssemblies /N ube ssembly with heavy spring - use with 1, 11, & 23 spools /N ube ssembly with light spring - use with 4, S2, S8, & S24 spools /N ube ssembly with heavy spring - use with 20 & 21 spools lug ssemblies (Single Solenoid Valve only) /N lug ssembly with Heavy Spring - use with 1, 11, & 23 spools /N lug ssembly with Light Spring - use with 4, 20, 21, S2, S8, & S20 spools ube End Nut /N ube O-ring /N 3908N-9 (Nitrile) /N 3908V-9 (Fluorocarbon) Weights: Single Solenoid Spool Section Double Solenoid Spool Section 1.26 kg (2.8 lbs.) 1.50 kg (3.3 lbs.) bv06.p65, dd, jk Hydraulics 5 Elyria, Ohio US

10 Catalog 3123/US echnical Information ankable Control Valves Series V06 Inlets General Series V06 ankable Inlets include Inlet Reliefs, ankable Unloader, ankable Inlet Relief with Unloader, and roportional ankable Unloader. hey are used in conjunction with V06 bankable valve sections. hey are used to regulate system pressure, unload the pump in a closed center circuit, or regulate pressure and unload the pump in a closed center circuit. Operation Inlet Relief he inlet relief on the bankable valves is used to regulate the maximum system pressure. he inlet relief on the V06 is a RD083 series cartridge valve. Unloading Valve he inlet unloader is normally used with closed center directional valves to unload the pump when the directional control valves are in a neutral position. his is a normally open solenoid valve that is energized whenever one of the directional control valves are shifted out of neutral. he inlet unloader on a V06 is a DS081N series cartridge valve. Inlet Relief with Unloader his valve is normally used with closed center directional control valves to provide a system relief and to unload the pump when the directional control valves are in the neutral position. roportional Unloader his valve is used in systems with single or multiple non-proportional directional control valves. he unloader is a normally open proportional flow control valve. y actuating one of the directional control valves and varying the input current to the proportional valve; the actuated directional control valve receives the benefit of proportional flow from the proportional unloader. s less flow is directed to tank by the proportional unloader, more flow is available to the actuated directional control valve. Once the optimum speed is achieved to the actuator from the directional control valve, the current to the proportional unloader can then be held constant. Specifications bvb06i.p65, dd, jk Features Inlet Relief High flow capacity with reduced space requirements. Full cartridge design no loose parts standard cartridge valves. Relief valve is differential area, direct-acting, poppet design. Manual override optional for unloading valve. Manual override standard for proportional unloader. Inlet Unloader Inlet Relief Unloader roportional Unloader Rated Flow 37.9 LM (10 GM) 34.1 LM (9 GM) 30.3 LM (8 GM) Max. Inlet ressure 210 ar (3000 SI) 210 ar (3000 SI) 210 ar (3000 SI) Max. Setting ressure 210 ar (3000 SI) Not pplicable Not pplicable Reseat ressure 80% of Crack ressure Not pplicable Not pplicable Max. Internal Leakage 2/3 cc/min. (10 drops/min.) 2/3 cc/min. (10 drops/min.) 82 cc/min. at 350 ar (5000 SI ) at 350 ar (5000 SI ) (5 cu. in./min.) Cavity C08-2 C08-2 C09-2 Operating emperature Nitrile: -40 C to +93 C (-40 F to +200 F) Range (mbient) Fluorocarbon: -23 C to +121 C (-10 F to +250 F) Cartridge Material ll parts steel. ll working parts hardened, ground, and lapped. ody Material High ensile luminum or Continuous Cast Steel Filtration ISO 16/13, SE Class 4 or better Mounting No restrictions Hydraulics 6 Elyria, Ohio US

11 Catalog 3123/US Dimensions ankable Control Valves Series V06 Inlets *Inch equivalents for millimeter dimensions are shown in (**) Inlet Relief orque 20 N.m. (180 in.-lbs.) 15.9 (0.63) 31.8 (1.25) 66.5 (2.62) 7.9 (0.31) yp (2.80) 7.9 (0.31) 13.2 (0.52) 50.8 (2.00) 24.6 (0.97) 35.1 (1.38) 6.8 (0.27) Dia. hru Holes - 4 laces 25.4 (1.00) (5.42) orque Max. 3.4 N.m. (30 in.-lbs.) Inlet Unloader orque Max. 20 N.m. (180 in.-lbs.) 15.9 (0.63) 31.8 (1.25) 66.5 (2.62) 7.9 (0.31) yp (0.52) 7.9 (0.31) 50.8 (2.00) 24.6 (0.97) 35.1 (1.38) 43.3 (1.70) (5.08) 25.4 (1.00) #6 SE 6.8 (0.27) Dia. hru Holes - 4 laces bvb06i.p65, dd, jk Hydraulics 7 Elyria, Ohio US

12 Catalog 3123/US Dimensions ankable Control Valves Series V06 Inlets *Inch equivalents for millimeter dimensions are shown in (**) roportional Inlet (5.45) 63.5 (2.50) 40.6 (1.60) 50.8 (2.00) 31.8 (1.25) 9.5 (0.37) 63.8 (2.51) 34.9 (1.38) 17.4 (0.69) 8.0 (0.31) Inlet Unloader with Relief orque Max. 20 N.m. (180 in.-lbs.) 15.9 (0.63) 31.8 (1.25) orque Max. 3.4 N.m. (30 in.-lbs.) 6.8 (0.27) Dia. hru Holes - 4 laces 66.5 (2.62) 7.9 (0.31) yp (2.80) 7.9 (0.31) 13.2 (0.52) 50.8 (2.00) 24.6 (0.97) 35.1 (1.38) 43.3 (1.70) 25.4 (1.00) (7.88) bvb06i.p65, dd, jk Hydraulics 8 Elyria, Ohio US

13 Catalog 3123/US Ordering Information ankable Control Valves Series V06 Inlets V06 6 ankable Valve Function Relief djustment djustment Range Optional ressure Setting Coil Voltage Coil Wattage Override Option (Unloader) Coil ermination Seals SE-6 ody Omit C Unloader Only Capped with Concealed adjustment ressure x 10 (i.e., 235 = 2350 SI (1.6 ar)). ll settings at 11.3 LM (3 GM). Omit V Nitrile Fluorocarbon Symbol MR U Omit Unloader Only ar ( SI) Setting: 121 ar ( LM (6 GM) ar ( SI) Setting: 172 ar ( LM (6 GM) Main Relief Unloader Omit D012 D Omit L L H H Main Relief Only 12 VDC 24 VDC 120 VC Main Relief Only 12 Watt (non-rop) 17 Watt (rop) 25 Watt (non-rop) 30 Watt (rop) Omit D S S1 W W Main Relief Only DIN lug Face (C or DC) Dual Spade (DC Only) Double Screw (DC Only) Single Screw Internally Ground (DC Only) Dual Wire (DC Only) Weather ack (DC Only) UR Unloader & Relief Omit M E No Override/ roportional Flush ype Extended in U3 U6 U8 roportional Unloader 11.3 LM (3 GM) with 17 Watt Coil roportional Unloader 22.5 LM (6 GM) with 17 Watt Coil roportional Unloader 30 LM (8 GM) with 30 Watt Coil )( )( )( DF1 DF1 DF1 Weights: Model V06U.48 kg (1.1 lbs.) Model V06UR.64 kg (1.4 lbs.) Model V06MR.43 kg (0.9 lbs.) Model V06U.48 kg (1.1 lbs.) Service arts Solenoid Coils V06MR-6 (ody for main relief or unloader) V06UR-6 (ody for main relief with unloader) V06U-6 (ody for proportional unloader) bvb06i.p65, dd, jk Hydraulics 9 Elyria, Ohio US

14 Catalog 3123/US echnical Information ankable Control Valves Series V06 Stack-On Valves General ankable Stack-On valves include single and double. O. check valves, single and double crossover relief valves, single and double meter-in and meter-out, pressure compensated and non-compensated flow controls, single and double reliefs to tank, and single and double counterbalance valves. ll stack-on valves fit on top of their V06 bankable spool sections to provide secondary functions. Up to two different stack-on valves can be installed on top of their respective bankable spool sections. Operation Stack-on single and double.o. Check valves are used in load holding operations. hese should only be used in conjunction with a motor spool, a bleeder spool, or a series spool. Single and dual crossover reliefs are used to vent shocks that occur at a motor. ny spool can be used in conjunction with these reliefs. Meter-in and meter-out flow controls are used to control speed either to or from the actuator. he pressure compensated version will provide constant flow regardless of changes in load or pressure. ny spool can be used in conjunction with these flow controls. Single and double counterbalances are used in load holding and over center applications. hese should only be used in conjunction with a motor spool, a bleeder spool, or a series spool. Features Cartridge design eliminates leak points. High flow capacity with reduced space requirements. Reduced cumulative pressure drop. Easy to service. Specifications.C..O. Checks Crossover Reliefs Flow Controls Flow Controls Counterbalances Rated Flow 37.9 LM (10 GM) 37.9 LM (10 GM) 45.4 LM (12 GM) 30.3 LM (8 GM) 56.8 LM (15 GM) Max. Operating ressure 350 ar (5000 SI) 350 ar (5000 SI) 210 ar (3000 SI) 210 ar (3000 SI) 275 ar (4000 SI) Max. 1/3 cc/min. 2/3 cc/min. 1/3 cc/min. Not pplicable 1/3 cc/min. Rated ressure (5 drops/min.) (10 drops/min.) (5 drops/min.) (5 drops/min.) Oper. emp. Range (mbient) -25 C to +93 C (-40 F to +200 F) Cartridge Material ll parts steel. ll working parts hardened, gound, and lapped. ody Material luminum lloy orting SE -6 SE -6 SE -6 SE -6 SE -6 Filtration ISO 16/13, SE Class 4 or better Mounting No restrictions Cavity C08-2 C09-2 C10-2 C10-2 Special bv06so.p65, dd, jk Hydraulics 10 Elyria, Ohio US

15 Catalog 3123/US echnical Information ankable Control Valves Series V06 Stack-On.O. Checks Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single.O. Check Double.O. Check 23.1 (0.91) #6 SE With 22.4 (0.88) Dia. C'ore x 1.3 (0.05) Deep 69.9 (2.75) 38.1 (1.50) 17.5 (0.69) 6.8 (0.27) Dia. hru - 4 Holes 35.1 (1.38) 47.6 (1.88) 41.3 (1.63) 34.9 (1.38) 17.5 (0.69) 88.9 (3.50) 58.7 (2.31) (0.40) (1.50) 25.4 (1.00) for Sandwich lock Only 40.6 (1.60) 8.6 (0.34) 6.3 (0.25) 6.4 (0.25) #6 SE With 22.4 (0.88) Dia. C'ore x 1.3 (0.50) Deep 25.4 (1.00) 6.8 (0.27) Dia. hru - 4 Holes orque 20 N.m. (180 in.-lbs.) orque 2 N.m. (180 in.-lbs.) 37.3 (1.47) 37.3 (1.47) 79.8 (3.14) (4.47) Single.O. Check art Number lock Cartridge CVH081 iston Double.O. Check art Number lock Cartridge CVH081 iston Ordering Information V 06 ankable Valve Size Location Cracking ressure LM (6 GM) Nominal Flow C ort.o. Check ort.o. Check & ort.o. Check Omit 0.3 ar (5 SI) ar (10 SI) ar (20 SI) ar (65 SI) Weights: V06- or V06- V06-C.51 kg (18 oz.).76 kg (27 oz.) bv06so.p65, dd, jk Hydraulics 11 Elyria, Ohio US

16 Catalog 3123/US echnical Information Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single Crossover Relief ankable Control Valves Series V06 Stack-On Reliefs Double Crossover Relief 19.1 (0.75) 76.2 (3.00) 38.1 (1.50) 25.4 (1.00) 6.4 (0.25) #6 SE With 22.4 (0.88) Dia. C'ore x 1.3 (0.05) Deep 12.7 (0.50) 63.5 (2.50) 38.1 (1.50) 25.4 (1.00) 6.4 (0.25) #6 SE With 22.4 (0.88) Dia. C'ore x 1.3 (0.05) Deep 17.5 (0.69) (1.88) (1.38) 6.8 (0.27) Dia. hru - 4 Holes 6.4 (0.25) 6.8 (0.27) Dia. hru - 4 Holes 19.8 (0.78) 44.2 (1.74) orque 20 N.m. (180 in.-lbs.) 38.4 (1.51) 62.7 (2.47) 18.5 (0.73) Single Crossover Relief art Number lock Cartridge RD083C ar ( SI) Cartridge RD083C ar ( SI) Ordering Information Double Crossover Relief art Number lock Cartridge RD083C ar ( SI) Cartridge RD083C ar ( SI) V 06 C ankable Valve Size Location djustment Style djustment Range LM (6 GM) Nominal Flow D E F ort to ort Crossover Relief ort to ort Crossover Relief & ort Crossover Relief C Concealed djust Weights: V06-D or V06-E V06-F.51 kg (18 oz.).76 kg (27 oz.) ar ( SI) Setting: 52 ar ( LM (3 GM) ar ( SI) Setting: 135 ar ( LM (3 GM) bv06so.p65, dd, jk Hydraulics 12 Elyria, Ohio US

17 Catalog 3123/US echnical Information Dimensions *Inch equivalents for millimeter dimensions are shown in (**) 13.5 (0.53) orque N.m. ( in.-lbs.) Counterbalance 76.2 (3.00) 38.1 (1.50) (0.69) (1.38) (1.88) 6.4 (0.25) Cyl. ort #6 SE With 22.4 (0.88) Dia. C'ore x 1.3 (0.05) Deep 23.3 (0.92) ankable Control Valves Series V06 Stack-On Counterbalances orque N.m. ( in.-lbs.) yp (3.00) 63.5 (2.50) 30.9 (1.22) (4.28) Double Counterbalance 38.1 (1.50) 6.8 (0.27) Dia. hru - 4 Holes Cyl. ort #6 SE With 22.4 (0.88) Dia. C'ore x 1.3 (0.05) Deep 17.4 (0.69) (1.38) (1.87) 6.4 (0.25) 23.9 (0.94) (4.28) 76.2 (3.00) 44.5 (1.75) 28.4 (1.12) Mounting Surface (4.97) 44.2 (1.74) 80.8 (3.18) 65.0 (2.56) Cyl. ort #6 SE Counterbalance art Number Qty lock Cartridge Consult ar ( SI) Factory Cartridge Consult ar ( SI) Factory 102X1 ipe lug 1 Double Counterbalance art Number Qty lock lock Cartridge Consult ar ( SI) Factory Cartridge Consult ar ( SI) Factory 102X1 ipe lug 2 O-ring 2018N-7 2 Ordering Information V 06 3 S ankable Valve Size Location 3:1 ilot Ratio djustment Style djustment Range LM (6 GM) Nominal Flow 3 3:1 Ratio S Screw Weights: V06-NN & V06- V06-RR.51 kg (18 oz.).96 kg (34 oz.) NN RR ort Counterbalance ort Counterbalance & ort Counterbalance ar ( SI) Setting: 86 ar ( LM (6 GM) ar ( SI) Setting: 172 ar ( LM (6 GM) bv06so.p65, dd, jk Hydraulics 13 Elyria, Ohio US

18 Catalog 3123/US echnical Information Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single.C. Flow Control Meter-In or Meter-Out ankable Control Valves Series V06 Stack-On.C. Flow Controls Double.C. Flow Control Meter-In or Meter-Out 69.9 (2.75) 50.0 (1.97) 50.0 (1.97) 17.5 (0.69) 35.1 (1.38) (1.38) (1.88) 25.4 (1.00) (5.87) 38.1 (1.50) 6.4 (0.25) 7.9 (0.31) 6.4 (0.25) 6.4 (0.25) 25.4 (1.00) 38.1 (1.50) 88.9 (3.50) (9.74) 25.4 (1.00) 6.4 (0.25) 17.5 (0.69) Single Flow Control art Number Qty lock Meter-In lock Meter-Out Cartridge FC101 1 Double Flow Control art Number Qty lock Meter-In lock Meter-Out Cartridge FC101 2 Ordering Information V 06 ankable Valve Size Location djustment Style djustment Range LM (6 GM) Nominal Flow G H J ort Meter-In ort Meter-In & ort Meter-In S K Screw djust Knob djust amper Resistant K ort Meter-Out Weights: V06-G, V06-H, V06-K & V06-L V06-J & V06-M.54 kg (19 oz.).76 kg (27 oz.) L M ort Meter-Out & ort Meter-Out LM ( GM) 1.88 LM (0.56 GM) LM ( GM) 3.75 LM (1.0 GM) LM ( GM) LM (3.0 GM) LM ( GM) 22.5 LM (6.0 GM) bv06so.p65, dd, jk Hydraulics 14 Elyria, Ohio US

19 Catalog 3123/US echnical Information ankable Control Valves Series V06 Stack-On Flow Controls Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single Flow Control Meter-In or Meter-Out 69.9 (2.75) 50.0 (1.97) Double Flow Control Meter or Meter-Out 50.0 (1.97) (5.87) 25.4 (1.00) 38.1 (1.50) (1.38) (0.25) (0.69) 6.4 (0.25) 7.9 (0.31) 25.4 (1.00) 6.4 (0.25) 25.4 (1.00) 38.1 (1.50) 88.9 (3.50) (9.74) 6.4 (0.25) 17.5 (0.69) (1.38) (1.88) Single Flow Control Dual Flow Control art Number Qty lock Meter-In lock Meter-Out Cartridge FV101 1 art Number Qty lock Meter-In lock Meter-Out Cartridge FV101 2 Ordering Information V 06 ankable Valve Size Location djustment Style LM (6 GM) Nominal Flow G5 H5 J5 ort Meter-In ort Meter-In & ort Meter-In S K Screw djust Knob djust K5 ort Meter-Out L5 ort Meter-Out Weights: V06-G5, V06-H5, V06-K5 & V06-L5 V06-J5 & V06-M5.54 kg (19 oz.).76 kg (27 oz.) M5 & ort Meter-Out bv06so.p65, dd, jk Hydraulics 15 Elyria, Ohio US

20 Catalog 3123/US Ordering Information ankable Control Valves Series V06 Valve ssemblies with or without Stack-On Options V 06 ankable Valves Size Inlet Function Spools LM (6 GM) Nominal Flow Omit MR U UR U3 U6 U8 Std Inlet No Relief No Unloader Main Relief Unloader Unloader & Relief roportional Unloader 11.3 LM (3 GM) with 17 Watt Coil roportional Unloader 22.5 LM (6 GM) with 17 Watt Coil roportional Unloader 30.0 LM (8 GM) with 30 Watt Coil Note: Standard setting GM, with screw adjustments on all relief cartridges. Standard setting 1000 crack, with screw adjustments on all counterbalance cartridges. Symbol )( )( )( DF1 DF1 DF1 Symbol S2 S8 S LM (8 GM) Max. Flow* without Malfunction; arallel Circuit Only 22.7 LM (6 GM) Max. Flow* without Malfunction; arallel Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; arallel Circuit Only 22.7 LM (6 GM) Max. Flow* without Malfunction; arallel Circuit Only 22.7 LM (6 GM) Max. Flow* without Malfunction; arallel Circuit Only 30.0 LM (8 GM) Max. Flow* without Malfunction; arallel Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; Series Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; Series Circuit Only 26.5 LM (7 GM) Max. Flow* without Malfunction; Series Circuit Only ) ) *t 70 SI Note: Maximum of six spools per assembly. For each additional spool repeat spool option after stack-on option. ) ) Service arts odies V06-6 V06-E6 V06-M6 V06-SI6 V06-SM6 V06-SO6 Coils /N ****** /N ****** /N ****** /N ****** /N ****** /N arallel or Series Individual ody arallel Inlet/Outlet ody arallel Middle ody Series Inlet ody Series Middle ody Series Outlet ody (No Spool) Double Spade Coil Double Wire Coil Double Screw Coil Single Screw Coil DIN lug Face Coil (C or DC) Weather ack Coil Note: Coils are available in 12 VDC, 24 VDC, & 120 VC versions only. /N VDC is a 12 VDC Double Wire Coil. Spools /N Spool /N Spool /N Spool /N Spool /N Spool /N Spool /N S2 Spool /N S8 Spool /N S24 Spool ube ssemblies /N ube ssembly with heavy spring - use with 1, 11, & 23 spools /N ube ssembly with light spring - use with 4, S2, S8, & S24 spools /N ube ssembly with heavy spring - use with 20 & 21 spools lug ssemblies (Single Solenoid Valve only) /N lug ssembly with Heavy Spring - use with 1, 11, & 23 spools /N lug ssembly with Light Spring - use with 4, 20, 21, S2, S8, & S20 spools ube End Nut /N Seals /N 2013N-7 (etween sections) /N 2018N-7 (etween stacks) bv06so.p65, dd, jk Hydraulics 16 Elyria, Ohio US

21 Catalog 3123/US Ordering Information ankable Control Valves Series V06 Stack-On Options* Seals Coil Voltage Coil ermination Omit V Nitrile Fluorocarbon D012 D VDC; 30 Watt 24 VDC; 30 Watt 120 VC; 30 Watt D V SV S1V W W DIN lug Face (C or DC) SE Double Spade, Vertically-Oriented (DC Only) Double 8-32 Screw & Nut Vertically-Oriented (DC Only) Single 8-32 Screw & Nut Internally Ground, Vertically-Oriented (DC Only) Double Wire 24" Class H (DC Only) Weather ack Connector, 5" Leads, Male Connector (DC Only) Symbol ort.o. Check Symbol M & ort Meter-Out ressure Comp. C D E F G H J K L ort.o. Check & ort.o. Checks ort to ort Crossover Relief ort to ort Crossover Relief & orts Dual Crossover Relief ort Meter-In Flow Control ressure Comp. ort Meter-In Flow Control ressure Comp. & ort Meter-In Flow Control ressure Comp. ort Meter- Out Flow Control ressure Comp. ort Meter-Out Flow Control ressure Comp. Note: Maximum of two stack-ons per spool section. * Meter-In is from the valve to the actuator. Meter-Out is from the actuator to the valve. G5 H5 J5 K5 L5 M5 NN RR ort Meter-In Flow Control Non-ressure Comp. ort Meter-In Flow Control Non-ressure Comp. & ort Meter-In Flow Control Non-ressure Comp. ort Meter-Out Flow control Non-ressure Comp. ort Meter-Out Flow Control Non-ressure Comp. & ort Meter-Out Non-ressure Comp. ort Counterbalance 56.8 LM (15 GM) Max. ort Counterbalance 56.8 LM (15 GM) Max. & ort Counterbalance 56.8 LM (15 GM) Max. Weights: Single Solenoid Spool Section Double Solenoid Spool Section 1.26 kg (2.8 lbs.) 1.50 kg (3.3 lbs.) bv06so.p65, dd, jk Hydraulics 17 Elyria, Ohio US

22 Catalog 3123/US ssembled Valves ankable Control Valves Series V06 *Inch equivalents for millimeter dimensions are shown in (**) (8.40) ube 2.0 N.m. (180 in.-lbs.) orque 25.4 (1.00) 6.4 (0.25) Nut Finger ight orque 36X7SZ Lockwasher 16X107SZ Nut 1/4-20 ie Rod9N.m. (80 in.-lbs.) orque Mounting Kit, O/R late, O/R's, ie Rods, Nuts, Washers, rackets Foot 31.8 (1.25) yp. ody E6 O-Ring late O-Ring 2013N-7 (2013V-7) ody M6 ody E6 3.0 (0.12) 28.5 (1.12) (0.63) (0.32) 71.1 (2.80) 49.0 (1.93) L1 L (1.93) 38.1 (1.50) Mounting Kit ody SI6 ody SM6 ody SM6 Outlet ort late V06-SO (0.63) 25.4 (1.00) (8.40) 0.25 (6.4) 6.8 (0.27) 71.1 (2.8) Number of Spool Sections Dimensions L1 L2 L1 L2 L1 L2 L1 L2 L1 L2 L1 L2 Individual-arallel or Series (1.88) (3.63) arallel (3.81) (5.56) (5.74) (7.49) (7.67) (9.42) (9.60) (11.35) (12.83) (14.58) arallel, arallel with Inlet Relief, Inlet Unloader with (3.18) (4.93) (5.11) (6.86) (7.04) (8.79) (8.97) (10.72) (10.90) (12.65) (12.96) (14.71) Relief Series (4.49) (6.24) (6.42) (8.17) (8.35) (10.10) (10.28) (12.03) (12.21) (13.96) Series with Inlet Relief (3.18) (4.93) (5.79) (7.54) (7.72) (9.47) (9.65) (11.40) (11.58) (13.33) (13.51) (15.26) Mounting Kit Individual-arallel or Series V06-MK1 arallel V06-MK2 V06-MK3 V06-MK4 V06-MK5 V06-MK6 arallel with Inlet Relief, Inlet Unloader with Relief V06-MK1 V06-MK2 V06-MK3 V06-MK4 V06-MK5 V06-MK6 Series V06-MK1 V06-MK2 V06-MK3 V06-MK4 V06-MK5 V06-MK6 Series with Inlet Relief V06-MK1C V06-MK2C V06-MK3C V06-MK4C V06-MK5C V06-MK6C bv06assy.p65, dd, jk Hydraulics 18 Elyria, Ohio US

23 Catalog 3123/US ssembly Configurations ankable Control Valves Series V06 One spool section parallel or series () 1 V06-6 ody () One spool section with inlet relief, inlet unloader, or inlet unloader with relief parallel only () () 1 V06-MR,U, or, UR-6 ody () 1 V06-E6 ody () 1 Mounting kit, V06-MK1 wo spool sections parallel only () () 1 V06-E6 () 1 V06-E6 () 1 Mounting kit, V06-MK2 wo spool sections with inlet relief, inlet unloader, or inlet unloader with relief parallel only () () () 1 V06-MR,U, or, UR-6 ody () 1 V06-M6 ody () 1 V06-E6 ody (C) 1 Mounting kit, V06-MK2 hree spool sections parallel only () () (C) 1 V06-E6 () 1 V06-M6 ody () 1 V06-E6 ody (C) 1 Mounting kit, V06-MK3 hree spool sections with inlet relief, inlet unloader, or inlet unloader with relief parallel only () () () (C) 1 V06-MR,U, or, UR-6 ody () 2 V06-M6 ody () 1 V06-E6 ody (C) 1 Mounting kit, V06-MK3 For four to six section parallel assemblies, use the three spool section parallel only assembly as shown as a starting point. For each additional section, add one V06-M6 section between the V06-E6 sections. Mounting kits will be V06-MK4 to MK6 respectively. For four to six section parallel assemblies with an inlet relief, inlet unloader, inlet unloader with relief, use the three spool parallel assembly as shown as a starting point. For each additional section, add one V06-M6 section between the V06-MR, U, or UR6 and V06-E6 sections. Mounting kits will be V06-MK4 to MK6 respectively. One spool section with inlet relief, inlet unloader, or inlet unloader with relief series only () () (C) 1 V06-MR,U, or, UR-6 ody () 1 V06-SM6 ody () 1 V06-SO6 ody (C) 1 Mounting kit, V06-MK1C wo spool sections series only () () (C) 1 V06-SI6 ody () 1 V06-SM6 ody () 1 V06-SO6 ody (C) 1 Mounting kit, V06-MK2 wo spool sections with inlet relief, inlet unloader, or inlet unloader with relief series only () () () (C) 1 V06-MR,U, or, UR-6 ody () 2 V06-SM6 ody () 1 V06-SO6 ody (C) 1 Mounting kit, V06-MK2C For three to six section series assemblies, use the two spool section series only assembly as shown as a starting point. For each additional section, add one V06-SM6 section between the V06-SI6 and V06-SO6 sections. Mounting kits will be V06-MK3 to MK6 respectively. For three to six section series assemblies with an inlet relief, inlet unloader, inlet unloader with relief, use the three spool series assembly as shown as a starting point. For each additional section, add one V06-SM6 section between the V06-MR, U, or UR6 and V06-SO6 bodies. Mounting kits will be V06-MK3C to MK6C respectively. bv06assy.p65, dd, jk Hydraulics 19 Elyria, Ohio US

24 Catalog 3123/US Stacking Kit and Configurations ankable Control Valves Series V06 Stack Mounting Kit Matrix Single Stack Valve: Choose stack valve in column to left. Follow chart to column labeled Single Stack. Choose stack mounting kit part number. Double Stack Valves: Choose bottom stack from column at left. Follow chart over to top stack valve. Choose stack mounting kit part number. ottom or Single Stack op Stack Stacking Kit /N Single Double Nitrile O-rings Single and Double Single Flow and Counterbalance Crossover Fluorocarbon O-rings Single Stack.O. Check Double Control ( or ) Relief Single and Double V06-SK1 Not pplicable Not pplicable Not pplicable Not pplicable.o. Check V06-SK1V Single and Double V06-SK1 V06-SK4 Not pplicable V06-SK5 V06-SK7 Flow Control V06-SK1V V06-SK4V V06-SK5V V06-SK7V Single Counter- V06-SK1 V06-SK3 V06-SK3 Not pplicable Not pplicable balance ( or ) V06-SK1V V06-SK3V V06-SK3V Double V06-SK3 Not pplicable Not pplicable Not pplicable Not pplicable Counterbalance V06-SK3V Single Crossover V06-SK1 V06-SK3 V06-SK3 V06-SK4 Not pplicable Relief ( or ) V06-SK1V V06-SK3V V06-SK3V V06-SK4V Double Crossover V06-SK2 V06-SK6 V06-SK6 V06-SK7 Not pplicable Relief V06-SK2V V06-SK6V V06-SK6V V06-SK7V Stack Valve Component Data lternate Method of Determining Stack Valve Mounting Kits: Determine Cap Screw Minimum Length (L) using formula below and choose next longest cap screw and associated mounting kit from the Cap Screw Data chart: Single Stack Cap Screw Minimum Length (L) = Stack Valve Height (H) - Stack Valve Counterbore (C) mm (0.38") Double Stack Cap Screw Minimum Length (L) = ottom Stack Valve Height (H) + op Stack Valve Height (H) - op Stack Valve Counterbore (C) mm (0.38") Single and Single and Single Double Single Cross- Double Stack Valve Double.O. Double Flow Counterbalance Counterbalance over Relief Crossover Check Control ( or ) ( or ) Relief Stack Valve 37.3 mm 50.0 mm 44.4 mm 80.8 mm 44.2 mm 62.7 mm Height (H) (1.47") (1.97") (1.75") (3.18") (1.74") (2.47") Stack Valve 7.6 mm 20.3 mm 6.6 mm 7.6 mm 6.4 mm 11.2 mm Counterbore (0.30") (0.80") (0.26") (0.30") (0.25") (0.44") (C) Stacking Kits Cap Screw 44.4 mm 50.8 mm 63.5 mm 88.9 mm 95.2 mm mm mm mm Length (1.75") (2.00") (2.50") (3.50") (3.75") (4.00") (4.25") (4.50") Mounting Kit Number V06-SK1 V06-SK1 V06-SK2 V06-SK3 V06-SK4 V06-SK5 V06-SK6 V06-SK7 w/ Nitrile Mounting Kit Number V06-SK1V V06-SK1V V06-SK2V V06-SK3V V06-SK4V V06-SK5V V06-SK6V V06-SK7V w/ Fluorocarbon Stack valve mounting kits are furnished complete with socket head cap screws, lock washers, and o-ring seals. lease contact the factory for combinations not shown in the chart for application approval. bv06assy.p65, dd, jk Hydraulics 20 Elyria, Ohio US

25 Catalog 3123/US Ordering Information ankable Control Valves Series V06 Mounting Kits V 06 MK ankable Valve Size Mounting Kit No. of Spool Combinations Sections (1 to 6) Omit C Individual parallel spool sections. (Note: When only one section is used, the individual spool section can be either parallel or series.) arallel assemblies with inlet relief, inlet unloader, or unloader with relief. wo through six section series assemblies without inlet relief, inlet unloader, or unloader with relief. Series assemblies with inlet relief, inlet unloader, or unloader with relief. bv06assy.p65, dd, jk Hydraulics 21 Elyria, Ohio US

26 Catalog 3123/US echnical Information ankable Control Valves Series V18 General Series V18 ankables are 2 or 3 position, 4-way, directional control valves. hey provide a spool valve that can be used either individually or in multiple spool banks. V18 bankable valves have auxiliary banking sections that can be mounted to provide auxiliary functions such as an inlet relief or unloading function. In addition, stack-on sections can be mounted on the cylinder port face of the V18 bankable valve spool sections to provide additional functions such as crossover reliefs, cylinder port reliefs,.o. checks, flow controls, and counterbalances. V18 bankable valves are also available with two different proportional spool options, and can be used to create custom, multifunctional circuits. Operation he spool is shifted from its center position by either energizing one of the solenoids, applying air or hydraulic pressure, or by shifting the lever. hree-position spring centered and two-position spring offset valves are available. he spools of the proportional V18 bankable valves are shifted by energizing one of the solenoid coils. he travel of the spool is in direct proportion to the amperage applied to the solenoid coil. he more amperage that is applied, the further the spool shifts until it is at full travel. s long as the coil amperage is held steady, the spool will hold its position. s the amperage decreases, the spool will travel back towards its neutral position. Metering notches on the spool vary the pressure drop across the spool. s the spool travels, the flow varies. Once the spool is held in a given position, the pressure drop across the metering notches of the spool determines the flow. Features High flow capacity with reduced space requirements. High back pressure; all ports withstand maximum working pressure. recision machined valve body is made from high tensile cast iron. five chamber style body ensures high pressure operation. Six different spool styles are available; all are four land spools for smoother shifting. vailable operators include single or double solenoids, lever, hydraulic pilot, or air pilot. ll solenoids are a one-piece coil featuring numerous voltages and terminations. bv18.p65, dd, jk Hydraulics 22 Elyria, Ohio US

27 Catalog 3123/US Specifications ankable Control Valves Series V18 V18 V18 roportional Nominal Flow LM (8-24 GM) Up to 22.5 LM (6 GM) (at 70 SI ) depending on spool depending on spool Maximum Inlet & arallel: 350 ar (5000 SI) Inlet arallel: 350 ar (5000 SI) Inlet ank ressure 210 ar (3000 SI) ank 210 ar (3000 SI) ank Series: 210 ar (3000 SI) Inlet & ank orting SE -8 SE -8 Maximum Internal #1 Spool: 22.9 cc per land/min. #81 Spool: 22.9 cc per land/min. Leakage (1.40 cu. in. per land/min.) (1.40 cu. in. per land/min.) (3000 SI) #2 Spool: 47.2 cc per land/min. #82 Spool: 22.9 cc per land/min. (110 SSU oil) (2.88 cu. in. per land/min.) (1.40 cu. in. per land/min.) #9 Spool: 24.4 cc per land/min. (1.49 cu. in. per land/min.) #11 Spool: 87.4 cc per land/min. (5.33 cu. in. per land/min.) Hysteresis Not pplicable 8% Frequency Not pplicable 200 Hz WM ir ressure Crack ar (50 SI) Not pplicable to Shift Full Shift ar (100 SI) Not pplicable Maximum ir ressure 10.3 ar (150 SI) Not pplicable ir iston rea 506 sq. mm (.785 sq. in.) Not pplicable ir iston Stroke 3.4 mm (.135 in.) Not pplicable Hydraulic ressure Crack ar (200 SI ) to Shift Full Shift ar (300 SI) Not pplicable Max. Hydraulic ilot ressure 210 ar (3000 SI) Not pplicable Hydraulic iston rea 198 sq. mm (.307 sq. in.) Not pplicable Hydraulic iston Stroke 3.4 mm (.135 in.) Not pplicable Operating Nitrile: -40 C to +93 C (-40 F to +200 F) Nitrile: -40 C to +93 C (-40 F to +200 F) emperature Fluorocarbon: -32 C to +121 C (-25 F to +250 F) Fluorocarbon: -32 C to +121 C (-25 F to +250 F) Range (mbient) Material ody: recision machined and ody: recision machined and honed from cast iron honed from cast iron Spool: Hardened and ground steel Spool: Hardened and ground steel Filtration ISO 16/13, ISO 16/13, SE Class 4 or better SE Class 4 or better Mounting osition No restrictions No restrictions Mounting ype Line mounted Line mounted bv18.p65, dd, jk Hydraulics 23 Elyria, Ohio US

28 Catalog 3123/US Construction Views ankable Control Valves Series V18 Valve ody With Spool roportional Valve ody With Spool Single Solenoid Double Solenoid V18S ( Side) - V18S ( Side) V18S Lever Detented Lever V18L ( Side) - V18L ( Side) V18D ( Side) - V18D ( Side) Single Hydraulic ilot Double Hydraulic ilot V18-H ( Side) - V18-H ( Side) V18-H Single ir ilot Double ir ilot V18- ( Side) - V18- ( Side) V18- bv18.p65, dd, jk Hydraulics 24 Elyria, Ohio US

29 Catalog 3123/US erformance Curves ankable Control Valves Series V18 Switching Limits Flow (Q) GM LM ar 0 SI , Operating ressure Notes: 1. Shift limits apply to all actuator types. 2. Unless otherwise specified, all curves were generated using solenoid actuators at 90% of rated with voltage. 3. he 4 spool maximum working pressure drop cannot exceed 136 ar (2000 SI) from inlet to work port using 24 watt coils, and 204 ar (3000 SI) using 30 watt coils. 4. he 1 spool and the 11 spool should be used with 30 watt coils when working pressure exceeds 238 ar (3500 SI ). 5. ll valves tested using 110 SSU oil. 6. Maximum flow for the 2 spool is 45 LM (12 GM) using C coils. 7. ll C coils must be 25 watt rated. Differential ressure ressure Drop ( ) SI ar LM 0 GM Flow (Q) Flow ath S O O L * 1** 4** 3** *20 Spool, De-energized **20 Spool, Energized Notes: 1. Refer to shift limit curves for flow capabilities of individual spools. 2. Curves were generated using 110 SSU hydraulic oil. bv18.p65, dd, jk Hydraulics 25 Elyria, Ohio US

30 Catalog 3123/US echnical Information ankable Control Valves Series V18 Solenoid Coil Specifications Solenoid Nominal Voltage/Hz In Rush mps Holding mps Wattage D10 10 VDC D10H 10 VDC D12 12 VDC D12H 12 VDC D24 24 VDC D24H 24 VDC H 120 VC/60 Hz H 110 VC/50 Hz H 240 VC/60 Hz H 220 VC/60 Hz ypical Solenoid Response imes DC COILS ressure Response Full Shift Spool Coil ype ull In Drop Out Drop Out 1 12 VDC, 24 Watt (12) 65 ms 40 ms 239 ms 1 12 VDC, 30 Watt (12H) 42 ms 40 ms 239 ms 2 12 VDC, 24 Watt (12) 174 ms 40 ms 140 ms 2 12 VDC, 30 Watt (12H) 155 ms 40 ms 144 ms 4 12 VDC, 24 Watt (12) 44 ms 40 ms 294 ms 4 12 VDC, 30 Watt (12H) 40 ms 40 ms 292 ms 9 12 VDC, 24 Watt (12) 426 ms 40 ms 340 ms 9 12 VDC, 30 Watt (12H) 191 ms 40 ms 431 ms VDC, 24 Watt (12) 45 ms 40 ms 233 ms VDC, 30 Watt (12H) 38 ms 40 ms 257 ms VDC, 24 Watt (12) 69 ms 20 ms 23 ms VDC, 30 Watt (12H) 47 ms 20 ms 27 ms C COILS ressure Response Full Shift Spool Coil ype ull In Drop Out Drop Out VC/60 Hz, (11H) 12 ms 20 ms 279 ms VC/50 Hz, (11H) 12 ms 20 ms 279 ms VC/60 Hz, (11H) 12 ms 20 ms 278 ms VC/50 Hz, (11H) 12 ms 20 ms 278 ms VC/60 Hz, (11H) 12 ms 20 ms 278 ms VC/50 Hz, (11H) 12 ms 20 ms 278 ms VC/60 Hz, (11H) 16 ms 20 ms 242 ms VC/50 Hz, (11H) 16 ms 20 ms 242 ms VC/60 Hz, (11H) 16 ms 20 ms 249 ms VC/50 Hz, (11H) 16 ms 20 ms 249 ms VC/60 Hz, (11H) 17 ms 20 ms 236 ms VC/50 Hz, (11H) 17 ms 20 ms 236 ms roportional Solenoid Coil Specifications Solenoid Nominal Voltage/Hz Watts Step Response Ramp ime D VDC ms Up to 3 seconds D VDC ms Up to 3 seconds bv18.p65, dd, jk Hydraulics 26 Elyria, Ohio US

31 Catalog 3123/US Dimensions ankable Control Valves Series V18 *Inch equivalents for millimeter dimensions are shown in (**) Double Solenoid SE-8 Cylinder orts 66.6 (2.60) (5.90) (5.20) & coils are reversed with the #9 spool (2.60) 62.5 (2.50) 76.7 (3.00) 44.0 (1.70) 77.7 (3.10) 57.2 (2.30) 27.4 (1.10) (9.00) 25.4 (1.00) 38.3 (1.50) Single Solenoid () 77.7 (3.10) 57.2 (2.30) () Operates ort as shown (1.00) (1.10) 38.3 (1.50) (7.70) roportional Double Solenoid (9.74) bv18.p65, dd, jk Hydraulics 27 Elyria, Ohio US

32 Catalog 3123/US Dimensions ankable Control Valves Series V18 *Inch equivalents for millimeter dimensions are shown in (**) Lever (Operates ort as shown) 66.6 (2.60) SE-8 Cylinder orts (5.90) (5.30) 66.6 (2.60) 62.5 (2.50) 76.7 (3.00) 7.1 (0.30) Detented Lever (Operates ort as shown) (6.40) 77.7 (3.10) 57.2 (2.30) 27.4 (1.10) 38.3 (1.50) 25.4 (1.00) bv18.p65, dd, jk Hydraulics 28 Elyria, Ohio US

33 Catalog 3123/US Dimensions ankable Control Valves Series V18 *Inch equivalents for millimeter dimensions are shown in (**) Double Hydraulic ilot (5.30) 66.6 (2.60) SE-8 Cylinder orts & pilot are reversed with the #9 spool (2.60) 62.5 (2.50) 76.7 (3.00) 7.1 (0.30) () 77.7 (3.10) 57.2 (2.30) () 27.4 (1.10) 38.3 (1.50) (6.80) 25.4 (1.00) Single Hydraulic ilot (Operates ort as shown) () 77.7 (3.10) 57.2 (2.30) () 27.4 (1.10) 38.3 (1.50) (6.60) 25.4 (1.00) bv18.p65, dd, jk Hydraulics 29 Elyria, Ohio US

34 Catalog 3123/US Dimensions ankable Control Valves Series V18 *Inch equivalents for millimeter dimensions are shown in (**) Double ir ilot 66.7 (2.60) SE-8 Cylinder orts (5.90) (5.30) 66.7 (2.60) 62.5 (2.50) 76.7 (3.00) 7.1 (0.30) () 77.7 (3.10) 57.2 () (2.30) 27.4 (1.10) 38.4 (1.50) (7.70) 25.4 (1.00) Single ir ilot () 77.7 (3.10) 57.2 () (2.30) 27.4 (1.10) 38.4 (1.50) (7.00) 25.4 (1.00) bv18.p65, dd, jk Hydraulics 30 Elyria, Ohio US

35 Catalog 3123/US Ordering Information ankable Control Valves Series V18 Spool ssemblies (Individual Sections) V 18 ankable Valve Size Operators Spools Coil ermination Coil Voltage Coil Wattage ody ype LM (18 GM) Nominal Flow S S S L L D D H H H F F F Dual Solenoids Single Solenoid on Single Solenoid on Lever on Lever on Lever w/detent on Lever w/detent on Dual Hydraulic ilot Hydraulic ilot on Hydraulic ilot on Dual ir ilot ir ilot on ir ilot on roportional; Dual Solenoids roportional; Single Solenoid on roportional; Single Solenoid on 1 Closed Center; 68.1 LM (18 GM) Nominal; arallel 2 Open Center 90.8 LM (24 GM) Nominal; Series or arallel 4 Motor; 90.8 LM (24 GM); arallel 9 andem; 68.1 LM (15 GM); Series 11 leeder; 56.8 LM (15 GM); arallel 20 wo osition; 64.3 LM (17 GM); arallel 81 Closed Center; Closed ransition; roportional 22.7 LM (6 GM) 82 Motor; Meter-In; roportional 22.7 LM (6 GM) Omit D S S1 W W Omit D10 D12 D Omit L H Non-Solenoid DIN lug Face (C or DC) SE Double Spade (DC Only) Double 8-32 Screw & Nut (DC & non-roportional Only) Single 8-32 Screw & Nut; Internally Ground (DC & non-roportional Only) Double Wire 24" Class H (DC & non-roportional Only) Weather ack Connector, 5" Leads, Male Connector (DC & non-roportional Only) Note: roportional coils are available in 12 VDC and 24 VDC voltages with DIN and Dual Spade coils only. Non-Solenoid 10 VDC 12 VDC 24 VDC 120 VC (60 Hz) 110 VC (50 Hz) 240 VC (60 Hz) 220 VC (50 Hz) Non-Solenoid 24 Watt DC Only 30 Watt - DC (& roportional) 24 Watt - C Weights: Double Solenoid Single Solenoid 2.93 kg (6 lbs.) 2.03 kg (4.5 lbs.) Omit Without Inlet/Outlet - Spool Section Only Without Inlet/Outlet - Spool Section Only with dded ank ort for ank ort Reliefs bv18.p65, dd, jk Hydraulics 31 Elyria, Ohio US

36 Catalog 3123/US Ordering Information ankable Control Valves Series V18 Service arts odies V18-W V18-W Individual ody - Series or arallel Individual ody - Series or arallel with added ank ort for ank ort Reliefs Coils VDC, 24 Watt Dual Spade Coil VDC, 24 Watt Dual Spade Coil VDC, 24 Watt Dual Spade Coil VDC, 30 Watt Dual Spade Coil VDC, 30 Watt Dual Spade Coil VDC, 30 Watt Dual Spade Coil VDC, 24 Watt Dual Wire Coil VDC, 24 Watt Dual Wire Coil VDC, 24 Watt Dual Wire Coil VDC, 30 Watt Dual Wire Coil VDC, 30 Watt Dual Wire Coil VDC, 30 Watt Dual Wire Coil VDC, 24 Watt DIN lug Face Coil VC 60 Hz/110 VC 50 Hz 25 Watt DIN lug Face Coil VDC, 24 Watt DIN lug Face Coil VC 60 Hz/220 VC 50 Hz 25 Watt DIN lug Face Coil VDC, 24 Watt DIN lug Face Coil VDC, 30 Watt DIN lug Face Coil VDC, 30 Watt DIN lug Face Coil VDC, 30 Watt DIN lug Face Coil VDC, 30 Watt Double Spade roportional Coil VDC, 30 Watt Double Spade roportional Coil VDC, 30 Watt Double Wire roportional Coil VDC, 30 Watt Double Wire roportional Coil VDC, 30 Watt DIN lug Face roportional Coil VDC, 30 Watt DIN lug Face roportional Coil ube ssemblies /N C ube ssembly /N DC ube ssembly /N DC roportional ube ssembly Spools /N #1 Spool /N #2 Spool /N #4 Spool /N #9 Spool /N #11 Spool /N #20 Spool /N #81 roportional Spool /N #82 roportional Spool Seals 2013N-9 ody Seals (two required per ody) 3907N-9 ube/end Cap Seal (one required per ube/end Cap) bv18.p65, dd, jk Hydraulics 32 Elyria, Ohio US

37 Catalog 3123/US echnical Information ankable Control Valves Series V18 Inlets General ankable Inlet Reliefs, ankable Unloaders, ankable Reliefs with Unloaders, and roportional ankable Unloaders are used in conjunction with V18 bankable valve sections. hey are used to regulate system pressure, unload the pump in a closed center circuit, or regulate pressure and unload the pump in a closed center circuit. Operation Inlet Relief he inlet relief on the bankable valves is used to regulate the maximum system pressure. he inlet relief on the V18 is a RDH103 series cartridge valve. Unloading Valve he inlet unloader is normally used with closed center directional valves to unload the pump when the directional control valves are in a neutral position. his is a normally open solenoid valve that is energized whenever one of the directional control valves are shifted out of neutral. he inlet unloader on a V18 is a DSH101NR series cartridge valve. Inlet Relief with Unloader his valve is normally used with closed center directional control valves to provide a system relief and to unload the pump when the directional control valves are in the neutral position. roportional Unloader his valve is used in systems with single or multiple non-proportional directional controls valves. he unloader is a normally open proportional flow control valve. y actuating one of the directional control valves and varying the input current to the proportional valve; the actuated directional control valve receives the benefit of proportional flow from the proportional unloader. s less flow is directed to tank by the proportional unloader, more flow is available to the actuated directional control valve. Once the optimum speed is achieved to the actuator from the directional control valve, the current to the proportional unloader can then be held constant. Specifications Features High flow capacity with reduced space requirements. Full cartridge design no loose parts standard cartridge valves. Relief valve is differential area, direct-acting, poppet design. Manual override optional for unloading valve. Manual override standard for proportional unloader. Inlet Relief Unloader roportional Unloader Rated Flow 75 LM (20 GM) 56.3 LM (15 GM) 52.5 LM (14 GM) Max. Inlet ressure 375 ar (5500 SI) 350 ar (5000 SI) 210 ar (3000 SI) Max. Setting ressure 350 ar (5000 SI) Not pplicable Not pplicable Reseat ressure 80% of Crack ressure Not pplicable Not pplicable Max. Internal Leakage 2/3 cc/min. (10 drops/min.) 2/3 cc/min. (10 drops/min.) 82 cc/min. (5 cu. in./min.) at 350 ar (5000 SI ) at 350 ar (5000 SI ) Cavity C10-2 C10-2 C12-2 Operating emperature Nitrile: -40 C to +93 C (-40 F to +200 F) Range (mbient) Fluorocarbon: -23 C to +121 C (-10 F to +250 F) Cartridge Material ll parts steel. ll working parts hardened, ground, and lapped. ody Material High ensile luminum or Continuous Cast Steel Filtration ISO 16/13, SE Class 4 or better Mounting No restrictions bv18i.p65, dd, jk Hydraulics 33 Elyria, Ohio US

38 Catalog 3123/US Dimensions ankable Control Valves Series V18 Inlets *Inch equivalents for millimeter dimensions are shown in (**) Inlet Relief pprox (6.05) 83.1 (3.30) (1.10) (0.80) Inlet Unloading/Relief pprox (9.70) 27.0 (1.10) 8.1 (0.30) 64.1 (2.50) 38.3 (1.50) orque N.m. (35-40 ft.-lbs.) 5.3 (0.20) 8.4 (0.30) 17.2 (0.70) 42.3 (1.70) 52.7 (2.10) orque N.m. (35-40 ft.-lbs.) 5.3 (0.20) (4.10) 8.3 (0.30) 37.2 (1.50) 21.3 (0.80) 42.5 (1.70) (2.10) (2.50) (1.50) Inlet Unloading roportional Inlet pprox (6.10) 27.0 (1.10) 7.9 (0.30) 8.0 (0.30) pprox (8.70) 64.0 (2.50) orque N.m. (35-40 ft.-lbs.) 5.3 (0.20) 83.1 (3.30) (0.30) (1.50) 17.2 (0.70) 21.1 (0.80) 42.3 (1.70) 52.7 (2.10) 43.2 (1.70) 8.4 (0.30) 5.3 (0.20) 8.0 (0.30) 42.0 (1.70) 21.2 (0.80) 27.0 (1.10) 42.3 (1.70) orque N.m. (35-40 ft.-lbs.) Standard Inlet 23.5 (0.90) 15.3 (0.60) 38.4 (1.50) 51.6 (2.00) 13.7 (0.50) (2.50) (1.70) 64.0 (2.50) Inlet ort late 25.4 (1.00) 52.7 (2.10) 37.8 (1.50) 5.2 (0.20) 42.3 (1.70) 5.3 (0.20) 17.2 (0.70) 21.2 (0.80) bv18i.p65, dd, jk Hydraulics 34 Elyria, Ohio US

39 Catalog 3123/US Ordering Information ankable Control Valves Series V18 Inlets V18 ankable Valve ody Material Function Relief djustment djustment Range Override Option (Unloader) Coil Voltage Coil Wattage Coil ermination Omit luminum 207 ar Max. (3000 SI Max.) H* Steel 345 ar Max. (5000 SI Max.) *Note: If system pressure does not exceed 210 ar (3000 SI), aluminum bodies can be used. Higher pressures require steel bodies. SI MR U UR U No Relief or Unloader Main Relief Unloader Unloader & Relief roportional Unloader Omit Unloader Only ar ( SI) Setting: 34 ar ( LM (12 GM) ar ( SI) Setting: 68 ar ( LM (12 GM) ar ( SI) Setting: 103 ar ( LM (12 GM) ar ( SI) Setting: 138 ar ( LM (12 GM) Omit M E No Override/roportional Flush ype Extended in Omit Main Relief Only L 20 Watt (non-rop) 42 Watt (rop) Omit Main Relief Only D DIN lug Face (C or DC) Dual Spade (DC Only) W Dual Wire (DC Only) W Weather ack (DC Only) Omit K S Unloader Only Knob djust Screw djust amper Resistant Omit D10 D12 D Main Relief Only 10 VDC 12 VDC 24 VDC 120 VC (60 Hz) 110 VC (50 Hz) Service arts Inlet Relief RDH103*** Inlet Unloader DSH101N roportional Unloader DF122N14 Solenoid Coils S10LD************ DIN (Hirschman) Coil - Non roportional S10L************ Double Shade Coil - Non roportional S10LW************Double Wire Coil - Non roportional S10LW********** Double Wire Coil with weather pack connector - Non roportional /N ****** DIN (Hirschman) Coil - roportional /N ****** Double Shade Coil - roportional /N ****** Double Wire Coil - roportional /N ****** Double Wire Coil with weather pack connector - roportional Seals 2013N-9 ody Seal 2019N-9 ody Seal Weights: V18SI kg (12 oz.) V18MR kg (17 oz.) V18U kg (37 oz.) V18UR kg (54 oz.) V18U kg (40 oz.) bv18i.p65, dd, jk Hydraulics 35 Elyria, Ohio US

40 Catalog 3123/US echnical Information ankable Control Valves Series V18 Stack-Ons General ankable Stack-On valves are available on the V18. hese include single and double.o. check valves, single and double crossover relief valves, single and double meter-in and meter-out, pressure compensated and non-compensated flow controls, single and double reliefs to tank, and single and double counterbalance valves. ll stack-on valves fit on top of their respective ankable spool sections to provide secondary functions. Up to two different stack-on valves can be installed on top of their respective bankable spool sections. Operation Stack-On single and double.o. check valves are used in load holding operations. hese should only be used in conjunction with a motor spool, a bleeder spool, or a series spool. Single and double reliefs to tank are used to vent any shocks that occur at the cylinder to tank. Single and dual crossover reliefs are used to vent shocks that occur at a motor. ny spool can be used in conjunction with these reliefs. Meter-in and meter-out flow controls are used to control speed either to or from the actuator. he pressure compensated version will provide constant flow regardless of changes in load or pressure. ny spool can be used in conjunction with these flow controls. Single and double counterbalances are used in load holding and over center applications. hese should only be used in conjunction with a motor spool, a bleeder spool, or a series spool. Specifications bv18so.p65, dd, jk Features Cartridge design eliminates leak points. Reduced cumulative pressure drop. Easy to service. High flow capacity with reduced space requirements. ank ort &.C..O. Checks Crossover Reliefs Flow Controls Flow Controls Counterbalances Rated Flow 79.5 LM (21 GM) 75.7 LM (20 GM) 45.4 LM (12 GM) 30.3 LM (8 GM ) 56.8 LM (15 GM) Max. Operating 350 ar 350 ar 210 ar 210 ar 275 ar ressure (5000 SI) (5000 SI) (3000 SI) (3000 SI) (4000 SI) Max. 1/3 cc/min. 2/3 cc/min. 1/3 cc/min. Not pplicable 1/3 cc/min. Rated ressure (5 drops/min.) (10 drops/min.) (5 drops/min.) (5 drops/min.) Oper. emp. Range (mbient) -25 C to +93 C (-40 F to +200 F) Cartridge Material ll parts steel. ll working parts hardened, ground and lapped. ody Material luminum alloy for 210 ar (3000 SI) or continuous cast steel for over 210 ar (3000 SI) orting SE -8 SE -8 SE -8 SE -8 SE -8 Filtration ISO 16/13, SE Class 4 or better Mounting No restrictions Cavity C10-2 C10-2 C10-2 C10-2 Special Hydraulics 36 Elyria, Ohio US

41 Catalog 3123/US echnical Information Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single.O. Check ankable Control Valves Series V18 Stack-Ons Double.O. Check 95.3 (3.80) 52.4 (2.10) 8.4 (0.30) 26.8 (1.10) (4.50) 60.7 (2.40) 8.4 (0.30) 38.0 (1.50) 54.0 (2.10) 38.0 (1.50) 54.0 (2.10) 19.0 (0.80) (2.40) (0.30) 19.0 (0.80) 8.0 (0.30) 52.4 (2.10) 26.8 (1.10) pprox (4.00) pprox (5.10) 57.2 (2.30) orque 22 N.m. (190 in.-lbs.) orque 22 N.m. (190 in.-lbs.) 57.3 (2.30) Single.O. Check Double.O. Check art Number ody iston 5/10 SI /65 SI Check Valve CVH103 art Number ody iston 5/10 SI /65 SI Check Valve CVH103 Ordering Information V18 ankable Valve Location Cracking ressure C ort.o. Check ort.o. Check & ort.o. Checks Omit.68 ar (10 SI) 5.34 ar (5 SI) ar (20 SI) Weights: V18 & V18 V18C.54 kg (19 oz.).77 kg (27 oz.) ar (65 SI) bv18so.p65, dd, jk Hydraulics 37 Elyria, Ohio US

42 Catalog 3123/US echnical Information Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single Counterbalance ankable Control Valves Series V18 Stack-Ons Double Counterbalance 19.0 (0.80) 52.4 (2.10) 8.4 (0.30) 44.6 (1.80) 54.0 (2.10) 52.4 (2.10) 8.4 (0.30) 19.0 (0.80) 38.0 (1.50) 38.0 (1.50) 8.0 (0.30) 60.8 (2.40) (4.50) 2.1 (54.0) 60.8 (2.40) (5.90) pprox (9.20) 44.6 (1.80) 8.0 (0.30) pprox (6.20) orque N.m. ( in.-lbs.) 57.2 (2.30) 57.2 (2.30) Single Counterbalance art Number ody (N or ) ody (NN or ) Double Counterbalance art Number ody (R) ody (RR) Counterbalance Valves Consult Factory Counterbalance Valves Consult Factory Ordering Information V 18 3 S ankable Valve Size Location ilot Ratio djustment Style djustment Range LM (18 GM) Nominal Flow N NN R RR ort Counterbalance 75.5 LM (0-20 GM) ort Counterbalance 56.8 LM (0-15 GM) ort Counterbalance 75.7 LM (0-20 GM) ort Counterbalance 56.8 LM (0-15 GM) & ort Counterbalance 75.7 LM (0-20 GM) & ort Counterbalance 56.8 LM (0-15 GM) S Screw Weights: V18N, V18NN, V18 & V18 V18R & V18RR ar ( SI) ar ( SI).74 kg (26 oz.) 1.25 kg (44 oz.) bv18so.p65, dd, jk Hydraulics 38 Elyria, Ohio US

43 Catalog 3123/US echnical Information ankable Control Valves Series V18 Stack-Ons Dimensions *Inch equivalents for millimeter dimensions are shown in (**) 54.0 (2.10) Single Crossover Relief/Single ort Relief 8.4 (0.30) 19.0 (0.80) 54.0 (2.10) Double Crossover Relief 8.4 (0.30) 38.0 (1.50) 38.0 (1.50) 52.4 (2.10) 80.2 (3.20) 9.7 (0.40) 8.0 (0.30) orque 22 N.m. (190 in.-lbs.) 8.0 (0.30) orque N.m. (190 in.-lbs.) (2.30) 80.2 (3.20) 9.7 (0.40) 52.4 (2.10) 60.6 (2.40) 19.0 (0.80) 57.2 (2.30) 54.0 (2.10) 19.0 (0.80) pprox (6.50) 89.7 (3.50) 60.8 (2.40) (0.60) (1.50) Double ort Relief 57.2 (2.30) pprox (9.90) 52.4 (2.10) pprox (10.30) 8.4 (0.30) 8.0 (0.30) Single ort Relief Double ort Relief Single Cross-Over Relief Double Cross-Over Relief art Number ody Relief Valves RDH103 art Number ody Relief Valves RDH103 art Number ody Relief Valves RDH103 art Number ody Relief Valves RDH103 Ordering Information V 18 ankable Valve Size Location djustment Style djustment Range LM (18 GM) Nominal Flow Weights: V18D, V18E, V18, V18W.54 kg (19 oz.) V18F, V18Y.79 kg (28 oz.) D E F W Y ort to ort Crossover Relief ort to ort Crossover Relief ort & ort Crossover Relief ort to ank Relief ort to ank Relief & ort to ank Relief S Screw djust K Knob djust ar ( SI) Setting: 35 ar ( LM (10 GM) ar ( SI) Setting: 69 ar ( LM (10 GM) ar ( SI) Setting: 104 ar ( LM (10 GM) ar ( SI) Setting: 173 ar ( LM (10 GM) bv18so.p65, dd, jk Hydraulics 39 Elyria, Ohio US

44 Catalog 3123/US echnical Information ankable Control Valves Series V18 Stack-Ons Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single.C. Flow Control Meter-In/Meter-Out 60.8 (2.40) (0.80) 38.0 (1.10) (1.50) 54.1 (2.10) Double.C. Flow Control Meter-In/Meter-Out 60.8 (2.40) 8.4 (0.30) 19.0 (0.80) 54.1 (2.10) 8.1 (0.30) 57.2 (2.30) 8.4 (0.30) 52.4 (2.10) 96.3 (3.80) pprox (5.10) 16.4 (0.60) Meter-In orque 22 N.m. (190 in.-lbs.) 57.2 (2.30) 52.4 (2.10) (4.50) pprox (7.20) orque 22 N.m. (190 in.-lbs.) 26.8 (1.10) 22.1 (0.90) 38.0 (1.50) 8.1 (0.30) Meter-Out 22.1 (0.90) Single Meter-In.C. Flow Controls Double Meter-In.C. Flow Controls Single Meter-Out.C. Flow Controls Double Meter-Out.C. Flow Controls art Number art Number art Number art Number ody ody ody ody Flow Control FC101 Flow Control FC101 Flow Control FC101 Flow Control FC101 Ordering Information V 18 ankable Valve Size Location* djustment Style djustment Range Weights: V18G, V18H, V18K, V18L V18J, V18M bv18so.p65, dd, jk LM (18 GM) Nominal Flow.65 kg (23 oz.).79 kg (28 oz.) G H J K L M ort Meter-In ort Meter-In & ort Meter-In ort Meter-Out ort Meter-Out & ort Meter-Out S Screw djust K Knob djust amper Resistant LM ( GM) LM ( GM) LM ( GM) LM ( GM) *Meter-in is from the valve to the actuator. Meter-Out is from the actuator to the valve. Hydraulics 40 Elyria, Ohio US

45 Catalog 3123/US echnical Information ankable Control Valves Series V18 Stack-Ons Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Single Meter-In/Meter-Out 60.8 (2.40) (0.80) 38.0 (1.10) (1.50) 54.1 (2.10) Double Meter-In/Meter-Out 60.8 (2.40) 8.4 (0.30) 19.0 (0.80) 54.1 (2.10) 8.1 (0.30) 57.2 (2.30) 8.4 (0.30) 52.4 (2.10) 96.3 (3.80) pprox (5.10) 16.4 (0.60) Meter-In orque 22 N.m. (190 in.-lbs.) 57.2 (2.30) 52.4 (2.10) (4.50) pprox (7.20) orque 22 N.m. (190 in.-lbs.) 26.8 (1.10) 22.1 (0.90) 38.0 (1.50) 8.1 (0.30) Meter-Out 22.1 (0.90) Single Meter-In Double Meter-In Single Meter-Out Double Meter-Out art Number art Number art Number art Number ody ody ody ody Flow Control FV101 Flow Control FV101 Flow Control FV101 Flow Control FV101 Ordering Information V 18 ankable Valve Size Location* djustment Style Weights: V18G5, V18H5, V18K5, V18L5 V18J5, V18M5 bv18so.p65, dd, jk LM (18 GM) Nominal Flow.65 kg (23 oz.).79 kg (28 oz.) G5 ort Meter-In S Screw djust H5 ort Meter-In K Knob djust J5 & ort Meter-In K5 ort Meter-Out L5 ort Meter-Out M5 & ort Meter-Out *Meter-in is from the valve to the actuator. Meter-Out is from the actuator to the valve. Hydraulics 41 Elyria, Ohio US

46 Catalog 3123/US echnical Information ankable Control Valves Series V18 Valve ssembly Dimensions *Inch equivalents for millimeter dimensions are shown in (**) End lates V18* E (1.00) 15.3 (0.60) 77.2 (3.00) 42.3 (1.70) 5.8 (0.20) 52.7 (2.10) 64.5 (2.50) 13.7 (0.50) 17.2 (0.70) 21.5 (0.80) 5.2 (0.20) 38.4 (1.50) 76.7 (3.00) V18* E (1.00) 15.3 (0.60) #4 SE #8 SE 5.3 (0.20) (2.10) (1.60) 64.0 (2.50) 13.7 (0.50) 17.2 (0.70) 21.2 (0.80) 42.3 (1.70) 5.2 (0.20) 38.4 (1.50) Ordering Information V18 E ankable Valve Material End late Variation Omit S luminum Steel 1 & orting 2 urn round late Weight: 0.3 kg (12 oz.) bv18ep.p65, dd, jk Hydraulics 42 Elyria, Ohio US

47 Catalog 3123/US Notes ankable Control Valves bv18ep.p65, dd, jk Hydraulics Elyria, Ohio US

48 Catalog 3123/US Ordering Information ankable Control Valves Series V18 Valve ssembly Valve ssemblies with or without Stack-On Options V 18 ankable Valves Size LM (18 GM) Omit H ressure Rating 210 ar (3000 SI) 350 ar (5000 SI) U8 roportional Unloader 52.5 LM )( (14 GM) with 17 Watt Coil Note: Specify pressure times 100. Example: 20 x 100 = 2000 SI. Inlet Function Symbol SI MR U UR No Relief No Unloader Main Relief Unloader Unloader & Relief Symbol DF1 Operators Spools Symbol 1 Closed Center; 68.1 LM (18 GM) Nominal; arallel 2 Open Center 90.8 LM (24 GM) Nominal; Series or arallel 4 Motor; 90.8 LM (24 GM); arallel 9 andemcenter; 68.1 LM (15 GM); Series 11 leeder; 56.8 LM (15 GM); arallel 20 wo osition; 64.3 LM (17 GM); arallel 81 Closed Center; Closed ransition; roportional 22.7 LM (6 GM) 82 Motor; Meter-In; roportional 22.7 LM (6 GM) Note: Each bank must consist of all parallel spools or all series spools. Symbol )( )( )( )( ) ) )( )( )( )( S Dual Solenoids H Hydraulic ilot on S Single Solenoid on H Hydraulic ilot on S Single Solenoid on Dual ir ilots L Lever on ir ilot on L Lever on ir ilot on D Lever w/detent on F roportional; Dual Solenoids D Lever w/detent on F roportional; Single Solenoid on H Dual Hydraulic ilots F roportional; Single Solenoid on bv18ep.p65, dd, jk Hydraulics 43 Elyria, Ohio US

49 Catalog 3123/US Ordering Information ankable Control Valves Series V18 Valve ssembly Stack-On Options Symbol C D E F G H J K L ort.o. Check ort.o. Check & ort.o. Checks ort to ort Crossover Relief ort to ort Crossover Relief & orts Dual Crossover Relief ort Meter-In Flow Control ressure Comp. ort Meter-In Flow Control ressure Comp. & ort Meter-In Flow Control ressure Comp. ort Meter- Out Flow Control ressure Comp. ort Meter-Out Flow Control ressure Comp. Coil ermination Symbol N Omit D S S1 W W ort Counterbalance ort Counterbalance Non-Solenoid DIN lug Face (C or DC) SE Double Spade (DC Only) Double 8-32 Screw & Nut (DC & non-roportional Only) Single 8-32 Screw & Nut; Internally Ground (DC & non-roportional Only) Double Wire 24" Class H (DC & non-roportional Only) Weather ack Connector, 5" Leads, Male Connector (DC & non-roportional Only) Note: roportional coils are available in 12 VDC and 24 VDC voltages with DIN coils only. Coil Voltage Omit D10 D12 D Coil Wattage Non-Solenoid 10 VDC 12 VDC 24 VDC 120 VC (60 Hz) 110 VC (50 Hz) 240 VC (60 Hz) 220 VC (50 Hz) Omit L H End late Omit and orting 2 urn round late Non-Solenoid 24 Watt DC Only 30 Watt - DC (& roportional) 24 Watt - C Mounting Kit Omit Mounting Kit Note: Mounting Kit included. See price sheet for adder. M & ort Meter-Out ressure Comp. R & ort Counterbalance G5 H5 J5 K5 L5 M5 ort Meter-In Flow Control Non-ressure Comp. ort Meter-In Flow Control Non-ressure Comp. & ort Meter-In Flow Control Non-ressure Comp. ort Meter-Out Flow control Non-ressure Comp. ort Meter-Out Flow Control Non-ressure Comp. & ort Meter-Out Non-ressure Comp. NN RR Note: Maximum of two stack-ons per spool section. bv18ep.p65, dd, jk W Y ort Counterbalance 56.8 LM (15 GM) Max. ort Counterbalance 56.8 LM (15 GM) Max. & ort Counterbalance 56.8 LM (15 GM) Max. ort to ank Relief ort to ank Relief & ort to ank Relief Weights: Double Solenoid Single Solenoid 2.93 kg (6 lbs.) 2.03 kg (4.5 lbs) Hydraulics 44 Elyria, Ohio US

50 Catalog 3123/US ssembled Valves ankable Control Valves Series V18 Valve ssembly *Inch equivalents for millimeter dimensions are shown in (**) 27.4 (1.08) () () 77.7 (3.06) (7.95) 57.2 (2.25) (5.72) 66.8 (2.63) 54.1 (2.13) 54.1 (2.13) (16.51) (15.88) 54.1 (2.13) 54.1 (2.13) 54.1 (2.13) 66.8 (2.63) 62.5 (2.46) 38.4 (1.51) (11.22) 76.7 (3.02) 25.4 (1.00) 7.1 (0.28) (6.50) orque 9 N.m. (80 in.-lbs.) 1/4-20 ie Rod orque 9 N.m. (80 in.-lbs.) Solenoid ube orque 9 N.m. (180 in.-lbs.) L1 L2 Coil Nut orque 3 N.m. (27 in.-lbs.) Number of Spool Sections Dimensions L1 L2 L1 L2 L1 L2 L1 L2 L1 L2 L1 L2 Mounting Hole to Mounting Hole (5.25) (7.38) (9.50) (11.63) (13.75) (15.88) End to End (5.88) (8.00) (10.13) (12.25) (14.38) (16.51) Dimensions with MR, U or UR (5.50) (6.13) (7.63) (8.25) (9.75) (10.13) (11.88) (12.50) (14.00) (14.63) (16.13) (16.76) Height Without Stack-On With One Stack-On With wo Stack-Ons (3.06) (5.72) (7.97) bv18ep.p65, dd, jk Hydraulics 45 Elyria, Ohio US

51 Catalog 3123/US ssembly Configurations ankable Control Valves Series V18 Valve ssembly One spool section parallel or series () () (C) 1 Valve section () 1 Inlet section (one required) (Standard, unloader, inlet relief or unloading relief) () 1 End plate, V18E-1 (required) (C) 1 Mounting Kit, V18MK-1 One spool section parallel or series () (D) () (C) 1 Valve section () 1 Inlet section (one required) (Standard, unloader, inlet relief or unloading relief) () 1 End plate, V18E-1 (required) (C) 1 Mounting Kit, V18MK-1 1 Stacking Kit, V18SK-1 1 Stack-on section (Relief, flow control, p.o. check or counterbalance) (D) One spool section parallel or series () (D) (D) () (C) 1 Valve section () 1 Inlet section (one required) (Standard, unloader, inlet relief or unloading relief) () 1 End plate, V18E-1 (required) (C) 1 Mounting Kit, V18MK-1 1 Stacking Kit, V18SK-2 2 Stack-on sections (Relief, flow control, p.o. check or counterbalance) (D) Note: For two spool sections through six spool sections use one spool section as a starting point. Mounting kits will be V18MK-2, V18MK-3, V18MK-4, V18MK-5 and V18MK-6 respectively. bv18ep.p65, dd, jk Hydraulics 46 Elyria, Ohio US

52 Catalog 3123/US Ordering Information ankable Control Valves Series V18 Mounting and Stack-on Kits Mounting Kits V18 MK ankable Valve olt Kit (Section to Section) Number of Sections (1-6) Circuit Omit Circuit Series or arallel without Inlet Relief and/or Unloader Series or arallel with Inlet Relief and/or Unloader Stack-on Kits V18 SK asic Valve Stack Kit (Stack-on to Section) Number of Stack-ons (1-2) bv18ep.p65, dd, jk Hydraulics 47 Elyria, Ohio US

53 Catalog 3123/US echnical Information ankable Control Valves Series VCS10 General Series VCS10 ankables are 2 or 3 position, 4-way circuit selector valves. VCS10 bankable valves can be used individually or in banks of up to three each. ypically, these are used in fork lift trucks for attachments such as a barrel rolling attachment. C1 C2 C3 C4 1 2 Operation When the solenoid coil of the VCS10 is de-energized, the spool connects ort 1 with ort C1 and ort 2 with ort C4; allowing flow to pass in either direction between the connected ports. When the solenoid coil is energized, the spool is shifted connection ort 1 with ort C2 and ort 2 with ort C3; allowing flow to pass in either direction between the connecting ports. Specifications Nominal Flow 37.5 LM (10 GM) (at 70 SI ) Maximum arallel: 210 ar (3000 SI) Inlet Inlet & ank 210 ar (3000 SI) ank ressure Series: Not pplicable orting SE -6 & SE -8 Maximum Selector Spool: cc/min. Internal Leakage (660 cu. 210 ar (110 SSU oil) (3000 SI) Operating emp. Nitrile: -40 C to +93 C Range (mbient) (-40 F to +200 F) Fluorocarbon: -32 C to +121 C (-25 F to +250 F) Material ody: recision machined and honed from cast iron Spool:Hardened and ground steel Filtration ISO 16/13, SE Class 4 or better Mounting osition No restrictions Mounting ype Individually or line mounted Features High flow capacity with reduced space requirements. High back pressure; all ports withstand maximum working pressure. recision machined valve body is made from high tensile cast iron. ll solenoids are a one-piece coil featuring numerous voltages and terminations. bvcs10.p65, dd, jk Hydraulics 48 Elyria, Ohio US

54 Catalog 3123/US erformance Curves Switching Limits Flow (Q) GM LM ankable Control Valves Series VCS10 Notes: 1. Unless otherwise specified, all curves were generated using solenoid actuators at 90% of rated with voltage. 2. ll valves tested using 110 SSU oil ar 0 SI Operating ressure Differential ressure ressure Drop ( ) SI ar >C >C1 0 1>C2 LM GM Flow (Q) 2>C3 1>C1 1>C2 Solenoid Coil Specifications Solenoid Nominal In Rush Holding Voltage/Hz mps mps Watts D VDC D VDC ressure Response Full Shift Spool Coil ype ull In Drop Out Drop Out Selector 12 VDC, 42 Watt 38 ms 18 ms 175 ms Selector 24 VDC, 42 Watt 36 ms 18 ms 175 ms Selector 120 VC, 42 Watt 27 ms 107 ms 180 ms bvcs10.p65, dd, jk Hydraulics 49 Elyria, Ohio US

55 Catalog 3123/US Dimensions ankable Control Valves Series VCS10 *Inch equivalents for millimeter dimensions are shown in (**) laces 31.8 (1.25) Install with Chamfer at Name late End of lock as Shown (4.25) (8.48) 63.4 (2.50) 49.3 (1.94) C4 C1 C2 C (3.63) 97.0 (3.83) 20.7 (0.82) 23.9 (0.94) 41.4 (1.63) ssembled Valves 63.5 (2.50) orque 11.6 N.m ( in.-lbs.) laces (5.10) (7.70) Install with Chamfer at Name late End of lock as Shown (4.25) (8.48) D C C4 C1 C2 C3 2 1 C4 C1 C2 C3 2 1 C4 C (3.83) O-Ring late with N-9 O-Rings bvcs10.p65, dd, jk Valve Dimension ort C D SE # SE # Hydraulics 50 Elyria, Ohio US

56 Catalog 3123/US Ordering Information ankable Control Valves Series VCS10 VCS 10 ankable Valve Circuit Selector Flow Seals Coil Voltage Coil ermination ody Option Weight: 4.05 kg (9.0 lbs.) LM (10 GM) Nominal Flow Omit V Nitrile Fluorocarbon Service arts odies VCS10-6 ody with 9/16-18 SE Straight hread orts VCS10-8 ody with 3/4-16 SE Straight hread orts Spools /N Coils /N ****** Conduit Coil (C or DC) /N ****** Double Wire Coil (DC Only) /N ****** DIN (Hirschman) (C or DC) /N ****** Double Screw Vertically Oriented (DC Only) /N ****** Double Spade Vertically Oriented (DC Only) /N ****** Single Screw Vertically Oriented (DC Only) Coils are available in 12 VDC, 24 VDC, or 120 VC only V C is a 120V C Conduit Coil ube ssemblies /N lug ssemblies /N ube End Nut /N D VDC D VDC VC Note: ll valves furnished with extended push type manual overrides. C D V SV S1V W 6 8 1/2" NF Conduit Class H Wires (C order) DIN Hirschman lug Face (C or DC) SE Double Spade, Vertically Oriented (DC only) Double 8-32 Screw & Nut (DC only) Single 8-32 Screw & Nut, Internally Ground (DC only) Double Wire 24" Class H (DC Only) 9/16-18 SE Straight hread orts 3/4-16 SE Straight hread orts ssembly Configurations One spool section 1 VCS10-6 or -8 ody () () wo spool section () () 2 VCS10-6 or -8 ody () 1 Mounting kit, VCS10-MK2 hree spool section () () () 3 VCS10-6 or -8 ody () 1 Mounting kit, VCS10-MK3 Mounting Kits Number of Spool Section in ank Mounting Kit VCS10-MK1 VCS10-MK2 VSC10-MK3 bvcs10.p65, dd, jk Hydraulics 51 Elyria, Ohio US

57 Catalog 3123/US Installation Data ankable Control Valves Series V General Recommendations for Using arker roducts ressure Ratings Unless otherwise specified, all arker valves have the continuous duty pressure ratings as shown in this catalog. ll cartridge valve pressure ratings above 3000 SI apply to cartridge valves installed in steel carrier blocks only. he maximum rated operating pressure for arker valves installed in aluminum alloy carrier blocks is ar (3000 SI). Cartridge Installation Cartridges must be lubricated prior to installation to prevent seal damage. Install and torque to the following values to prevent leakage and potential cartridge back-out: Cartridge Size No. 8 No. 9 No. 10 No. 12 orque Specifications lb.-ft lb.-ft lb.-ft lb.-ft. Note: Do not exceed these torque values, as it may result in damage to the block or valve malfunction. Service Integrated hydraulic circuit valves designed with arker valves are easily serviced by simply unscrewing the defective valve and replacing with a new one. arker valves are not field serviceable with the exception of the external seals. Replacement seal kits for the external seals are available for all arker valves. Cartridge orting rior to installation of individual cartridges or cartridges in bodies, please review flows on individual cartridges and on bodies. System Cleanliness ny hydraulic system that includes arker valves should be carefully protected against dirt and fluid contamination. Life of the valves, as well as of all other components, will be greatly lengthened. Operation will be smoother and more precise. Maintenance and repairs will be reduced. Lost production because of low pressure and flow will be minimized. Fluid contamination should be maintained to less than 500 particles larger than 10 micrometers per milliliter of fluid (SE Class 4 or better/iso 16/13). Hydraulic Fluids arker recommends using top quality hydraulic fluids having a viscosity range of 150 to 250 SSU (32 to 54 cst.) at 38 C (100 F). he absolute viscosity range should be 80 to 1000 SSU (16 to 220 cst.) Fluids should have highest anti-wear characteristics and be treated to avoid rust and oxidation. Seals When used with water glycol, water/oil emulsions, and high grade petroleum base hydraulic fluids, arker standard nitrile seals are suitable. When using phosphate esters fluids or their blends, specify arker optional seals made of Duont Viton. Synthetic fire resistant fluids require special seal materials which your arker representative can recommend. Special Requirements Consult your arker representative for factory recommendations on such situations as: Installations that will operate regularly at pressures higher than published catalog ratings; Use of hydraulic fluids other than those mentioned above; Operations where fluid temperature will exceed 121 C (250 F). bv.p65, dd, jk Hydraulics 52 Elyria, Ohio US

58 Catalog 3123/US Cavity Details No. 8 and 9 Size ankable Control Valves Series V arker Common Cavity Concept enefits Reduces number of form tools required Increases manifold design efficiency Increases manifold machining efficiency Dimensions *Inch equivalents for millimeter dimensions are shown in (**) Features he arker line of cartridge valves were designed to fit a limited number of common cavity configurations. s a result, a wide variety of cartridge valves fit a common cavity or machined body. Common Cavity No. C08-2 Ordering Information Installation ools 3/4-16UNF (.002) 30.2 (1.19) 14.3 (0.56) 14.0 (0.55) 2.9 (0.12) 2.5 (0.10) 17.5 (0.69) 17.4 (0.68)* 0.8 (0.03) Max * 7.9 (0.31) Max..05 (.002).05 (.002) 12.8 (0.50) Max. 63 Cavity No. Form ool No. C08-2 F (0.82) 20.6 (0.81)* 0.13 (.01)R (.01) 14.3 (0.56) 19.2 (0.76) 18.9 (0.74) 28.6 (1.13) Min (0.50)* 1.6 (0.06).03 (.001) Common Cavity No. C09-2 3/4-16UNF (.002) 30.2 (1.19) bv.p65, dd, jk 14.3 (0.56) 14.0 (0.55) 2.9 (0.12) 2.5 (0.10) 17.5 (0.69) 17.4 (0.68)* (0.82) 20.6 (0.81)* 0.13 (.01)R (.01) 0.8 (0.03) Max (0.56) 19.2 (0.76) 18.9 (0.75) 28.6 (1.13) Min * 7.9 (0.31) Max. 1.6 (0.06).05 (.002).05 (.002) 16.0 (0.63) Max (0.63) 15.9 (0.63) *.03 (.001) 63 Ordering Information Installation ools Cavity No. Form ool No. C09-2 F09-2 Hydraulics 53 Elyria, Ohio US

59 Catalog 3123/US Cavity Details No. 10 and 12 Size arker Common Cavity Concept enefits Reduces number of form tools required Increases manifold design efficiency Increases manifold machining efficiency Dimensions *Inch equivalents for millimeter dimensions are shown in (**) ankable Control Valves Series V Features he arker line of cartridge valves were designed to fit a limited number of common cavity configurations. s a result, a wide variety of cartridge valves fit a common cavity or machined body. Common Cavity No. C10-2 7/8-14UNF (.002) 34.1 (1.34) 18.4 (0.73) 18.2 (0.72) 2.9 (0.12) 2.5 (0.10) 20.7 (0.81) 20.6 (0.81)* 0.8 (0.03) Max. 45 * 11.1 (0.44) Max (.002).05 (.002) 16.0 (0.63) Max. 63 Ordering Information Installation ools Form ool No. Cavity No. 3/4" Str. Shank Morse aper C10-2 F10-2 F (0.95) 24.0 (0.94) * 0.13 (.01)R (.01) 15.9 (0.63) 24.6 (0.97) 24.4 (0.96) 33.3 (1.31) Min (0.63) 15.9 (0.63) *.03 (.001) 1.6 (0.06) Common Cavity No. C (0.86) 21.6 (0.85) 3.7 (0.15) 3.3 (0.13) 1-1/16-12UN (.002) 41.3 (1.63) 29.3 (1.15) 29.2 (1.15)* 24.8 (0.98) 24.7 (0.97)* (.01)R (.01) 30.2 (1.19) 29.9 (1.18) 0.8 (0.03) Max (0.75) 42.1 (1.66) Min. *.05 (.002).05 (.002) 15.9 (0.63) 22.3 Max. (0.88) Max (0.88) 22.2 (0.88) *.03 (.001) 1.6 (0.06) Ordering Information Installation ools Form ool No. Cavity No. 3/4" Str. Shank C12-2 F12-2 bv.p65, dd, jk Hydraulics 54 Elyria, Ohio US

60 Catalog 3123/US Offer of Sale ankable Control Valves Series V he items described in this document and other documents or descriptions provided by, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by, its subsidiaries and its authorized distributors. his offer and its acceptance by any customer ("uyer") shall be governed by all of the following erms and Conditions. uyer s order for any such items, when communicated to, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptance of this offer. 1. erms and Conditions of Sale: ll descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller s products are subject to and shall be governed exclusively by the terms and conditions stated herein. uyer s acceptance of any offer to sell is limited to these terms and conditions. ny terms or conditions in addition to, or inconsistent with those stated herein, proposed by uyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between uyer and Seller unless expressly accepted in writing by Seller. Seller s acceptance of any offer to purchase by uyer is expressly conditional upon uyer s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in uyer s offer, cceptance of Seller s products shall in all events constitute such assent. 2. ayment: ayment shall be made by uyer net 30 days from the date of delivery of the items purchased hereunder. mounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the uyer is late in making payment. ny claims by uyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after uyer s receipt of the shipment. 3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.. Seller s plant. Regardless of the method of delivery, however, risk of loss shall pass to uyer upon Seller s delivery to a carrier. ny delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery. 4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 18 months from date of shipment from. HIS WRRNY COMRISES HE SOLE ND ENIRE WRRNY ERINING O IEMS ROVIDED HEREUNDER. SELLER MKES NO OHER WR- RNY, GURNEE, OR RERESENION OF NY KIND WH- SOEVER. LL OHER WRRNIES, INCLUDING U NO LIM- IED O, MERCHNILIY ND FINESS FOR UROSE, WHEHER EXRESS, IMLIED, OR RISING Y OERION OF LW, RDE USGE, OR COURSE OF DELING RE HEREY DISCLIMED. NOWIHSNDING HE FOREGOING, HERE RE NO WR- RNIES WHSOEVER ON IEMS UIL OR CQUIRED WHOLLY OR RILLY, O UYER S DESIGNS OR SECIFICIONS. 5. Limitation Of Remedy: SELLER S LIILIY RISING FROM OR IN NY WY CONNECED WIH HE IEMS SOLD OR HIS CON- RC SHLL E LIMIED EXCLUSIVELY O REIR OR RE- LCEMEN OF HE IEMS SOLD OR REFUND OF HE URCHSE RICE ID Y UYER, SELLER S SOLE OION. IN NO EVEN SHLL SELLER E LILE FOR NY INCIDENL, CONSEQUEN- IL OR SECIL DMGES OF NY KIND OR NURE WHSO- EVER, INCLUDING U NO LIMIED O LOS ROFIS RISING FROM OR IN NY WY CONNECED WIH HIS GREEMEN OR IEMS SOLD HEREUNDER, WHEHER LLEGED O RISE FROM RECH OF CONRC, EXRESS OR IMLIED WRRNY, OR IN OR, INCLUDING WIHOU LIMIION, NEGLIGENCE, FIL- URE O WRN OR SRIC LIILIY. 6. Changes, Reschedules and Cancellations: uyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between uyer and Seller unless accepted by Seller in a written amendment to this greement. cceptance of any such requested modification or cancellation shall be at Seller s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special ooling: tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller s property notwithstanding payment of any charges by uyer. In no event will uyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges bv.p65, dd, jk paid by uyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. uyer s roperty: ny designs, tools, patterns, materials, drawings, confidential information or equipment furnished by uyer or any other items which become uyer s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without uyer placing an order for the items which are manufactured using such property, Seller shall not be responsible for any loss or damage to such property while it is in Seller s possession or control. 9. axes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. uyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If uyer claims exemption from any sales, use or other tax imposed by any taxing authority, uyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 10. Indemnity For Infringement of Intellectual roperty Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this art 10. Seller will defend and indemnify uyer against allegations of infringement of U.S. atents, U.S. rademarks, copyrights, trade dress and trade secrets (hereinafter Intellectual roperty Rights ). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against uyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual roperty Rights of a third party. Seller s obligation to defend and indemnify uyer is contingent on uyer notifying Seller within ten (10) days after uyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual roperty Rights of a third party, Seller may, at its sole expense and option, procure for uyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by uyer, or directed to items delivered hereunder for which the designs are specified in whole or part by uyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. he foregoing provisions of this art 10 shall constitute Seller s sole and exclusive liability and uyer s sole and exclusive remedy for infringement of Intellectual roperty Rights. If a claim is based on information provided by uyer or if the design for an item delivered hereunder is specified in whole or in part by uyer, uyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter Events of Force Majeure ). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller s control. 12. Entire greement/governing Law: he terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire greement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. his greement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this greement may be brought by either party more than two (2) years after the cause of action accrues. 9/91- Hydraulics 55 Elyria, Ohio US

61 Catalog 3123/US ankable Control Valves arker Hydraulics International Sales OfficesSeries V US 520 ernes venue Elyria, OH el: Fax: Great Lakes Region 6035 arkland oulevard Cleveland, OH el: Fax: Gulf Region 1701 N. Collins lvd. #139 Richardson, X el: Fax: Michigan Region 651 Robbins Drive roy, MI el: Fax: Northwest Region 1200 Westlake venue, N, #815 Seattle, W el: Fax: Southern Region 1990 Lakeside arkway, Suite185 ucker, G el: Fax: Chicago Region 500 South Wolf Road Des laines, IL el: Fax: acific Region Noyes venue Irvine, C el: Fax: arker VOC Mobile Sales Office 409 W. lgonquin Road Mt. rospect, Ill el: Fax: CN Canada 530 Kipling venue oronto, Ontario M8Z 5E6 el: Fax: MEX Mexico Calle 9, No. 6 lce lanco Naucalpan Edo de Mexico el: Fax: arker Europe ustria arker Hannifin NMF Handelskai Vienna, ustria el: Fax: elgium arker Hannifin S..N.V. v. Marcel hirylaan 200D russels, elgium el: Fax: CZ Czech Republic arker Hannifin Novodvorska 1010/14 CZ raha 4, Czech Republic el: Fax: DK Denmark arker Hannifin DK /S Industrigrenen 11 DK-2635 Ishoj, Denmark el: Fax: G England arker Hannifin plc 6 Greycaine Road G-Watford, Herts WD2 4Q England el: Fax: FIN Finland arker Hannifin Oy Ylastontie 16 FIN Vantaa, Finland el: Fax: F France arker Hannifin S.. Z..E. La Foret F Contamine-sur-rve, France el: Fax: D Germany arker Hannifin GmbH Gutenbergstrasse D Kaarst, Germany el: Fax: GR Greece Representation Office thens 8-10 Manis Street GR iraeus , Greece el: Fax: H Hungary udapest Representation Office udapesti Kepviseleti Iroda H-1148 udapest, Hungary Vezer ut el: Fax: I Italy arker Hannifin Sp Via rivata rchimede 1 I Corsico, Milano, Italy el: Fax: NL he Netherlands arker Hannifin.V. Edisonstraat 1 NL-7570 Oldenzaal, Holland el: Fax: N Norway arker Hannifin /S erghagan.o. ox 8 N-1405 Langhus, Norway el: Fax: L oland arowcowa Warsaw, oland el: Fax: bv.p65, dd, jk 8/1/98 Hydraulics 56 Elyria, Ohio US

62 Catalog 3123/US ankable Control Valves arker Hydraulics International Sales OfficesSeries V HK RC ortugal Rua Oscar de Silva, Dt. ras Leca de almeira Matosinhos, ortugal el: Fax: RUS Russia Komsomolsky rospect 42, Office GS Moscow G-48, Russia el: Fax: E Spain arker Hannifin Espana S.. Industrial Las Monjas arque Calle De Las Estaciones orrejon de rdoz Madrid, Spain el: Fax: S Sweden arker Hannifin Sweden Fagerstagatan 51 ox 8314 S Spanga, Sweden el: Fax: Hong Kong arker Hannifin Hong Kong Ltd. 8/F, Kin Yip laza, 9 Cheung Yee Street Cleung Sha Wan, Kowloon, Hong Kong el: Fax: IND India arker Hannifin India 701, Gateway laza Hiranandani Gardens, owai Mumbai, , ombay, India el: Fax: J Japan arker Hannifin Japan, Ltd. 626 otsuka-cho, otsuka-ku Yokohama-shi 244, Japan el: Fax: ROK Korea arker Hannifin sia acific Co. Ltd. 902 Dae Heung ldg Yeoksam-dong Kangnam-ku, Seoul, Korea el: Fax: aiwan arker Hannifin aiwan Co., Ltd. 87-1, No. 102, Sung Lung Road aipei, aiwan, R.O.C. el: Fax: hailand arker Hannifin hailand Co., Ltd. Muang hai hatra Office ower II 252/96 18th floor, Unit E Rachadaphisek Road Huaykwang, angkok 1j0320 el: Fax: Latin merican Group US an merican Division 7400 NW Corporate Center.Dr.SE. Miami, Florida el: Fax: R rgentina arker Hannifin rgentina S..I.C. vda. te. rturo U Illia 2064 Villa Maipu, 1650 San Martin rov. uenos ires, rgentina el: Fax: sia acific Group US ustralia arker Hannifin ustralia 9 Carrington Road Castle Hill, NSW 2154, ustralia el: Fax: CHN China arker Hannifin Hong Kong Ltd. eijing Office Suite 9-11, 21st fl., Hanwei ldg. No. 7 Guanghua Road, Chaoyang District eijing, , eople Republic of China el: Fax: arker Hannifin Hong Kong Ltd. Shanghai Office Room 1101, eregrine laza 1325 Huai Hai Road (M) Shanghai, , eople Republic of China el: Fax: bv.p65, dd, jk NZ New Zealand arker Hannifin (N.Z.) Ltd. 103 Harris Road, East amaki rivate ag 14906, anmure uckland, New Zealand el: Fax: R hilippines arker Hannifin Representative Office Unit 205, Richville Corporate Centre 1314, Commerce venue Madrigal usiness ark, yala laban Muntiniupa City, hilippines el: Fax: SG Singapore arker Hannifin Singapore te. Ltd. No. 11 4th Chin ee Road Jurong own, Singapore Republic of Singapore el: Fax: R razil arker Hannifin Ind. e Com. Ltda. v. Lucas Nogueira Garcez Jacarei, S, razil el: Fax: V Venezuela arker Hannifin devenezuela S.. Edificio Draza -1 y -2 oleita Norte Caracas, Venezuela el: Fax: frica Z South frica arker Hannifin frica ty. Ltd. arker lace 10 erne venue eroport, Kempton ark Kempton ark 1620, South frica el: Fax: /1/98 Hydraulics 57 Elyria, Ohio US

63 he erospace Group is a leader in the development, design, manufacture and servicing of control systems and components for aerospace and related high-technology markets, while achieving growth through premier customer service arkland lvd. Cleveland, Ohio elephone: (216) Fax: (216) Web site: bout arker Hannifin is a leading global motion-control company dedicated to delivering premier customer service. Fortune 500 corporation listed on the New York Stock Exchange (H), our components and systems comprise over 1,400 product lines that control motion in some 1,000 industrial and aerospace markets. arker is the only manufacturer to offer its customers a choice of hydraulic, pneumatic, and electromechanical motion-control solutions. Our Company has the largest distribution network in its field, with over 7,500 distributors serving more than 350,000 customers worldwide. arker s Charter o be a leading worldwide manufacturer of components and systems for the builders and users of durable goods. More specifically, we will design, market and manufacture products controlling motion, flow and pressure. We will achieve profitable growth through premier customer service. roduct Information North merican customers seeking product information, the location of a nearby distributor, or repair services will receive prompt attention by calling the arker roduct Information Center at our toll-free number: C-RKER ( ). In the UK, a similar service is available by calling he Climate & Industrial Controls Group designs, manufactures and markets system-control and fluid-handling components and systems to refrigeration, air-conditioning and industrial customers worldwide. he Fluid Connectors Group designs, manufactures and markets rigid and flexible connectors, and associated products used in pneumatic and fluid systems. he Seal Group designs, manufactures and distributes industrial and commercial sealing devices and related products by providing superior quality and total customer satisfaction. he Hydraulics Group designs, produces and markets a full spectrum of hydraulic components and systems to builders and users of industrial and mobile machinery and equipment. he Filtration Group designs, manufactures and markets quality filtration and clarification products, providing customers with the best value, quality, technical support, and global availability. he utomation Group is a leading supplier of pneumatic and electromechanical components and systems to automation customers worldwide. he Instrumentation Group is a global leader in the design, manufacture and distribution of high-quality critical flow components for worldwide process instrumentation, ultra-high-purity, medical and analytical applications.

64 Hydraulics Catalog 3123/US, 7.5M, 11/98, 520 ernes venue Elyria, Ohio US el: (440) Fax: (440) Web Site:

65 ulletin HY /US Series MV4 Multi-ak Directional Control Valves Effective: February 1, 2004 Supersedes: Cat. No. MF 1003 dated 10/99 Features Solenoid-operated valves incorporate manual overrides for virtually fail-safe performance Spool configurations allow for open-center series or closed-center parallel circuit stacks Solenoid coils are weather-resistant and rated for continuous duty at nominal voltage. hey provide for low current consumption to minimize energy usage. ankable inlet relief Inlet dump valve for use with parallel circuits Mid inlet/outlet section DC solenoid coils Various solenoid coil terminations alm button manual overrides roportional flow inlets (main & mid) he arker Series MV4 Multi-ak, solenoid-operated valves offer a modular banking design concept which eliminates costly fittings and potential leak points that simplify both factory and field installations. In addition to banking directional control valves, the main system relief valve may also be banked. ttachment options including crossover reliefs, single and double, pilot-operated checks as well as anti-cavitation checks, can be stacked on the cylinder ports. ll arker Multi-ak valves utilize the proven wet plunger design for trouble-free performance even in continuous-duty applications. Specifications Flow: 12 GM (45 L/M)*. For higher flow applications, consult factory. Operating ressure: arallel ank: 3000 SI (207 ar). Series ank: 2500 SI (172 ar). Operating Fluid: Standard petroleum-based. Leakage C- at 3000 SI (207 ar): 14.9 in 3 /min. (244 cc/min.) at 100 F (38 C), 150 SSU (32 cst). Filtration Requirement: Recommend 25 micron (nominal). Class 18/15 according to ISO 4406, or cleaner. 1 Elyria, Ohio, US

66 ERFORMNCE NOE: SE 10 oil at 100 F (38 C), Viscosity 150 SSU (32 cst) MERILS MOOR SOOL CENER MV4 17- Shown 2 Elyria, Ohio, US

67 DIMENSIONS DIMENSIONS RE IN INCHES (MILLIMEERS) ND RE FOR REFERENCE ONLY. 3 Elyria, Ohio, US

68 OIONS 4 Elyria, Ohio, US

69 ORDER CODE HOW O ORDER: arker Mini-ak Valves are coded by the assembled stack configuration (Left to Right) in a sequential order from inlet to outlet. lease refer to the ordering tables, to select a circuit type, inlet options, spool configuration, spool options, circuit conversion options as they apply to your application. 5 Elyria, Ohio, US

70 Offer of Sale he items described in this document and other documents or descriptions provided by, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by, its subsidiaries and its authorized distributors. his offer and its acceptance by any customer ( uyer ) shall be governed by all of the following erms and Conditions. uyer s order for any such items, when communicated to, its subsidiary or an authorized distributor ( Seller ) verbally or in writing, shall constitute acceptance of this offer. 1. erms and Conditions of Sale: ll descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller s products are subject to and shall be governed exclusively by the terms and conditions stated herein. uyer s acceptance of any offer to sell is limited to these terms and conditions. ny terms or conditions in addition to, or inconsistent with those stated herein, proposed by uyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between uyer and Seller unless expressly accepted in writing by Seller. Seller s acceptance of any offer to purchase by uyer is expressly conditional upon uyer s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in uyer s offer, cceptance of Seller s products shall in all events constitute such assent. 2. ayment: ayment shall be made by uyer net 30 days from the date of delivery of the items purchased hereunder. mounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the uyer is late in making payment. ny claims by uyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after uyer s receipt of the shipment. 3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.. Seller s plant. Regardless of the method of delivery, however, risk of loss shall pass to uyer upon Seller s delivery to a carrier. ny delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery. 4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 18 months from date of shipment from. HIS WRRNY COMRISES HE SOLE ND ENIRE WRRNY ERINING O IEMS ROVIDED HEREUNDER. SELLER MKES NO OHER WRRNY, GURNEE, OR RERESENION OF NY KIND WHSOEVER. LL OHER WRRNIES, INCLUDING U NO LIMIED O, MERCHNILIY ND FINESS FOR UROSE, WHEHER EXRESS, IMLIED, OR RISING Y OERION OF LW, RDE USGE, OR COURSE OF DELING RE HEREY DISCLIMED. NOWIHSNDING HE FOREGOING, HERE RE NO WRRNIES WHSOEVER ON IEMS UIL OR CQUIRED WHOLLY OR RILLY, O UYER S DESIGNS OR SECIFICIONS. 5. Limitation Of Remedy: SELLER S LIILIY RISING FROM OR IN NY WY CONNECED WIH HE IEMS SOLD OR HIS CONRC SHLL E LIMIED EXCLUSIVELY O REIR OR RELCEMEN OF HE IEMS SOLD OR REFUND OF HE URCHSE RICE ID Y UYER, SELLER S SOLE OION. IN NO EVEN SHLL SELLER E LILE FOR NY INCIDENL, CONSEQUENIL OR SECIL DMGES OF NY KIND OR NURE WHSOEVER, INCLUDING U NO LIMIED O LOS ROFIS RISING FROM OR IN NY WY CONNECED WIH HIS GREEMEN OR IEMS SOLD HEREUNDER, WHEHER LLEGED O RISE FROM RECH OF CONRC, EXRESS OR IMLIED WRRNY, OR IN OR, INCLUDING WIHOU LIMIION, NEGLIGENCE, FILURE O WRN OR SRIC LIILIY. 6. Changes, Reschedules and Cancellations: uyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between uyer and Seller unless accepted by Seller in a written amendment to this greement. cceptance of any such requested modification or cancellation shall be at Seller s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special ooling: tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller s property notwithstanding payment of any charges by uyer. In no event will uyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by uyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. uyer s roperty: ny designs, tools, patterns, materials, drawings, confidential information or equipment furnished by uyer or any other items which become uyer s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without uyer placing an order for the items which are manufactured using such property, Seller shall not be responsible for any loss or damage to such property while it is in Seller s possession or control. 9. axes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. uyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If uyer claims exemption from any sales, use or other tax imposed by any taxing authority, uyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 10. Indemnity For Infringement of Intellectual roperty Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this art 10. Seller will defend and indemnify uyer against allegations of infringement of U.S. atents, U.S. rademarks, copyrights, trade dress and trade secrets (hereinafter Intellectual roperty Rights ). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against uyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual roperty Rights of a third party. Seller s obligation to defend and indemnify uyer is contingent on uyer notifying Seller within ten (10) days after uyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual roperty Rights of a third party, Seller may, at its sole expense and option, procure for uyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by uyer, or directed to items delivered hereunder for which the designs are specified in whole or part by uyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. he foregoing provisions of this art 10 shall constitute Seller s sole and exclusive liability and uyer s sole and exclusive remedy for infringement of Intellectual roperty Rights. If a claim is based on information provided by uyer or if the design for an item delivered hereunder is specified in whole or in part by uyer, uyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter Events of Force Majeure ). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller s control. 12. Entire greement/governing Law: he terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire greement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. his greement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this greement may be brought by either party more than two (2) years after the cause of action accrues. 9/91-6 Elyria, Ohio, US

71 Notes 7 Elyria, Ohio, US

72 FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS CN CUSE DEH, ERSONL INJURY ND ROERY DMGE. his document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. he products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. Copyright 2004,, ll Rights Reserved WRNING Offer of Sale he items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. his offer and its acceptance are governed by the provisions stated in the "Offer of Sale". 520 ernes venue Elyria, Ohio, US el: (440) Fax: (440) ulletin HY /US, 3C, 2/04, HD

73 ulletin HY /US Series MV5 Mini-ak Directional Control Valves Effective: February 1, 2004 Supersedes: Cat. No. MF 1004 dated 10/99 Features Superior versatility in many combinations of different working sections Unique series/parallel banking Full manual overrides Optional high flow inlets (low ) Solenoid coils are weather-resistant and provide continuous duty at nominal rated voltage roportional flow inlet oth open and closed center configurations ower beyond feature he arker Series MV4 Mini-ak, solenoid-operated valves provide multiple-function directional control. he modular banking design concept eliminates costly fittings and potential leak points. arker Mini-ak valves are easy to install in both the factory and in the field. Solenoid actuator construction utilizes the proven wet plunger design. Series, parallel and series-parallel valve circuitry offers application flexibility and energy savings potential. Specifications Flow: 6 GM (23 L/M). Operating ressure: 3000 SI (207 ar) maximum. Operating Fluid: Standard petroleum-based. Leakage C- at 3000 SI (207 ar): 10.8 in 3 /min. (177 cc/min.) at 100 F (38 C), 150 SSU (32 cst). Filtration Requirement: Recommend 25 micron (nominal). Class 18/15 according to ISO 4406, or cleaner. 1 Elyria, Ohio, US