EManually Operated Directional Valves
|
|
- Solomon Cooper
- 5 years ago
- Views:
Transcription
1 DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- - DM- -C - DM- -D - DM- -D - DM- - - DM- -C - DM- -D - DM- -D - DM- - - DMG--C - DMG--D - DMG--D - DMG-- - DMG--C - DMG--D - DMG--D - DMG-- - DMG--C - DMG--D - DMG--D - DMG-- - DMG--C - DMG--D - DMG--D - DMG-- - DMG--C - DMG--D - DMG--D - DMG Ma ( SI) (.) (.) (.) (.) {} (79. {.8}) (79.) (79.) (.8) {} ( {8.}) () () (8.) (9.) (.) (.) (.) (.) (.8) (.8) (.8) 9 (.8) () () () () (9) (9) (9) 7 (77) Maximum Flow L/min (U.S.GM) Ma Ma ( SI) ( SI) (.) (.) (.) (.) (.) (.) (.) (.) {} {} (79. {.7}) (79. {.}) (79.) (79.) (79.) (79.) (.7) (.) {} {} ( {8.}) ( {8.}) () () () () (8.) (8.) (9.) (.) (.) (.) (.) (.8) (.8) (.8) (.9) () () () (79.) (9) (9) (9) (9.) (9.) (.) (.) (.) (.) (7.7) (.8) (.8) (.) () () () (.) (9) (9) (9) (8.7). Ma (7 SI) () () () (.8) (9) (9) (9) (.8) Note: he maximum flow means the limited flow without inducing any abnormality to the operation (changeover) of the valve. For details, please refer to the "List of Standard s and Maximum Flow" on pages 8 to 9. Varies depending on the spool type. For details, see the "List of Standard and Maximum Flows" for DSG- Series Solenoid Operated Directional s (page and at Hz rated voltage). he figures in parentheses indicate Max. flow for C,C, C and C. Varies depending on the spool type. For the details, see the table in the following page. Varies depending on the spool type. Same as DSHG- (at pilot pressure of. Ma ( SI). See page 9. Lever operating torque varies depends on the -line back pressure. See the right-hand figure. If the -Line back pressure exceeds 7 Ma ( SI), directly connect the drain port to the reservoir. Max.Operating ressure Ma (SI) () () () () () (). (7). (7) Max. -Line ack ressure Ma (SI) () t time spool shift is required: 7 () t time spool shift is not required: () t time spool shift is required: 7 () t time spool shift is not required: () () () () () () pprox. Mass kg (lbs.). (.).9 (8.) (8.).8 (.). (8.8) 7. (.) 7.9 (7.). (.) (.) 8. () () DMG- Lever Operating orque Nm. 8.. Ma SI -Line ack ressure Operating orque(in.lbf.) E 9
2 Number Designation F- Special Seals F: Special Seals for hosphate ester type fluids (Omit if not required) DM Series Number DM : Manually Operated Directional s ype of Connection : hreaded Connection G: Sub-plate Mounting - Size (iping size /) X (iping size ) (iping size -/) X (iping size -/) - No. of osition Spool-Spring rragement C: Spring Centred D: No-Spring Detented : Spring Offset See the table below for combinations. Spool ype,,,, 7 8, 9, Special wo osition, (Omit if not required) Refer to column "valves using neutral position and side position" (special -position valve) on page. - Design Number Design Standard None: Japanese Std. "JIS" 8: European Design Std. 9: N. merican Design Std. None: Japanese Std. "JIS" and European Design Std. 9: N. merican Design Std. Yuken can offer flanged connection valves described below. Consult us for the details. DMF-- - DMF-- - Numbers DMG--C DMG--C DMG--C DMG--C DMG--C DMG--C DMG--C DMG--C7 DMG--C9 DMG--C DMG--C DMG--C Rated Flow L/min (U.S.GM) (8.) () Maximum Flow of DMG--C Max. Operating ressure Ma (SI) () Max. Flow L/min (U.S.GM) 7 Ma( SI) Ma( SI) Ma( SI) (.8) 8 (7.) (.8) (.8) 8 (.) 9 (.8) (.) 9 (.8) (.8) 8 (.) 7 (8.) 9 (.8) (7.) (.8) (.8) (.8) (.8) (.8) 7 7 Graphic Symbols Spring Centred s (C ) # # # (.8) (.) (.9) (8.) (9.8) (.) (.) (9.) (.8) (7.7) (.) (.) (.) (.) (.) 8 (.) 8 (.) 9 (.) Spool ype List of Spool ype C D DMG- D C D DM- DMG- DM- DM- D C D D DMG- DMG- DMG- C D D No-Spring Detented s D D # # # # (#) # Spring Offset s ( ) # (#) #. osition # is applied for models DMG-- and DM -- /D. G osition # osition # osition # (#, in case of D MG -/-, DMG--D ) Note: he mark indicate the spool type available for each type.
3 E DIRECIONL CONROLS s Using Neutral osition and Side osition (Special wo osition ) In addition to the standard two positions valves (D, ), the following two types of two positions valves are available : s with neutral position (#) and position # (, D ), valves with neutral position (#) and position # (, D ). he mark in the table below indicates the spool type available for each models. Spring Offset s ype Graphic Symbols DM- DMG- DM- DM- DMG- DMG- DMG- ype Graphic Symbols DMG- DM- DMG- DM- DM- DMG- DMG- DMG osition # osition # osition # osition # No-spring Detented s ype Graphic Symbols DM- DM- DMG- DMG- DMG- ype Graphic Symbols DMG- DM- DM- DMG- DMG- DMG- D D D D D D D D D D D D D D D7 D8 D9 D D D D7 D8 D9 D D D osition # osition # osition # osition #. osition number is determined with three position type (C and D ) as the standard.
4 Sub-plates Numbers DMG- DMG- DMG- DMG- DMG- Numbers DMG- DMG- DMG- DMG- DMG- Japanese Standard "JIS" Sub-plate DSGM-- DSGM-X- DSGM-Y- DSGM-- DSGM-X- DSGM-Y- DHGM-- DHGM-X- DHGM-- DHGM-X- DHGM-- DHGM-X- hread Size Rc /8 Rc / Rc /8 Rc /8 Rc / Rc / Rc / Rc / Rc / Rc Rc -/ Rc -/ Japanese Standard "JIS" European Design Standard M Lg. M Lg. M Lg. M Lg. M Lg. M 7 Lg. pprox. Mass kg (bs.) (.8) (.8) (.8) (.) (.) (.) (9.7) (9.) (.) (.). (7.). (7.) European Design Standard Sub-plate DSGM--8 DSGM-X-8 DSGM--8 DSGM-X-8 DSGM-Y-8 DHGM--8 DHGM-X-8 DHGM--8 DHGM-X-8 DHGM--8 DHGM-X-8 Socket Head Cap Screw N. merican Design Standard No. - UNC -/ Lg. /- UNC -/ Lg. /- UNC -/ Lg. /8- UNC -/ Lg. /- UNC -/ Lg. /- UNC Lg. hread Size /8 S.F / S.F /8 S.F / S.F / S.F / S.F / S.F / S.F S.F -/ S.F -/ S.F Qty. 8 pprox. Mass kg (bs.) Sub-plates are available. Specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish. Sharable with Solenoid Operand Directional s and Solenoid Controlled ilot Operated Directional s. For dimensions, refer to the right table then see the corresponding pages. Mounting olts (.8) (.8) N. merican Design Standard Sub-plate DSGM--9 DSGM-X-9 DSGM-Y-9 (.) DSGM--9 (.) DSGM-X-9 (.) DSGM-Y-9 (9.7) (9.) DHGM--9 DHGM-X-9 (8.7) DHGM--9 (8.7) DHGM-X-9. (7.) DHGM--9. (7.) DHGM-X-9 ightening orque Nm (in. bs.) -7 (-) - (-) (-) (-7) - (88-89) 7-8 (9-77) hread Size /8 N / N /8 N /8 N / N / N / N / N / N N -/ N -/ N pprox. Mass kg (bs.) (.8) (.8) (.8) (.) (.) (.) (9.7) (9.) (.) (.). (7.). (7.) Sub-plate dimensions appearing page Subplate age DSGM- DSGM- 7 DHGM- DHGM- DHGM- Instructions void connecting the ank ort "" to a line with possible surge pressure. ressure Drop he following characteristics are based on the following conditions: viscosity of the fluid: mm /s ( SSU) and Specific Gravity:.8 DM-, X For any other viscosity, multiply the factors in the table below. mm /s Viscosity SSU Factor For any other specific gravity (G'), the pressure drop ( ') may be obtained from the formula below. ' = (G'/G) where, is a value on the following chart and G is.8. ressure Drop SI Ma U.S.GM Flow Rate L /min Spool ype ressure Drop Curve Number
5 E DIRECIONL CONROLS DM-, X ressure Drop SI Ma Flow Rate L /min U.S.GM Spool ype ressure Drop Curve Number DMG- ressure Drop SI Ma Flow Rate L /min U.S.GM C C C C C C C C7 C8 C9 C C C type D D D D D D D D7 D8 D9 D D D D D D D7 D8 8 ressure Drop Curve Number DMG- ressure Drop SI 7 Ma L /min U.S.GM Flow Rate Spool ype 7 9 ressure Drop Curve Number For DM-, DMG-, DMG-, and DMG-, refer to the table below then see the related page. Number DM- DMG- DMG- DMG- ressure Drop Characteristics Same as DSG- Series Solenoid Operated Directional s (Standard ype) Same as Solenoid Controlled ilot Operated Directional s (DSHG-) Same as Solenoid Controlled ilot Operated Directional s (DSHG-) age Remarks D is same as C
6 DM-- -/8/9 How to Change Lever osition: he lever position can be changed to any position in five different positions shown on the sketch in the right. For the lever position change, remove the Soc. Hd. Cap Screw and lever once, set the lever at the required position and tighten it with the Soc. Hd. Cap Screw firmly. DM-- - DM-- -8 DM-- -9 "C" hd. Rc /8 /8 S.F /8 N 7. (.9) 7 (.) Soc. Hd. Cap Screw (.) Hex. Soc. osition # osition # (.98) Dia. 9 (.7). (.8) Cylinder ort "" "C" hd. 9.7 (.7) 7 (.) (.9) 8.7 (.9) 8. (.7) 9.8 (7.) osition # (.) (.7). R9. (R.7) "C" hd. 7(.8) Dia. hrough (.) C' bore laces 7 (.) (.7) (.8) 7 (.7) (.8) "C" hd. ank ort "" "C" hd. Lever Operating orque: Not exceeding Nm ( IN. bs.) 7 (.) 8. (.) 9.7 (.) 9 (.7) 9 (.).8 (.8).8 (.) DM-, X- -/8/9 DM-, X- -/8/9 Cylinder ort "" DIMENSIONS IN MILLIMERES (INCHES) F E F DM-- - DM-X- - DM-- -8 DM-X- -8 DM-- -9 DM-X- -9 DM-- - DM-X- - "h" hd. Rc / Rc / S.F S.F / N N Rc -/ Rc -/ DM / S.F DM-X- -8 -/ S.F DM-- -9 DM-X- -9 No. DM- DM-X DM- DM-X -/ N -/ N "f" Dia. hrough "g" Dia. Spotface laces ank ort "" L C K S J S "h" hd. laces X Dimension mm (Inches) R "e" D osition # C Q N H U Y Z Neutral osition # (.7) Dia. a V X Stroke b osition # C D E F H J K L N Q S U V X Y Z a b d e f g (.97) (.) (.8) (.7) (.9) (.) 7. (.87). (.) (.9) (.) (.) (.8) (.) (.) 7 (.9) 7 (.8) 8 (.) 7 (.79) 7 (.) (.). (.) (.7) 8 (.9) (.) 7 (.99) 9 (.) 9 (.). (.9) (.7) (.97) d (.98) (.8) (9.8) (.8) (.9) (.7). (.) 78. (.9) (.7) (.9) (.). (.) 7. (.9) (.8)
7 E DIRECIONL CONROLS DMG-- -/9 Mounting surface: ISO ---- DIMENSIONS IN MILLIMERES (INCHES) osition # 7.(.) Dia. hrough 9.(.7) Dia. C' bore laces R9 (R.9) 7 (.8). (.9) Cylinder ort "" (.87):C 7(.7):D,D, (.).7 (.) Neutral osition #. (.) (.). (.8) 7 osition # ank ort "" he operating lever position can be adjusted as required on the circumference by loosening the set screw. Four positions are available in 9 increment. (.) (.79) Dia. (.) Dia. Lever Fixing Screw. (.) Hex. Soc. 7 (.9) (.98) 9 (.) 8 (.). (.99) 8 (.89) (.) Mounting Surface (s Furnished) Note: For the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page.
8 DMG-- -/9 Mounting surface: ISO -C--- DIMENSIONS IN MILLIMERES (INCHES) Cylinder ort "" 9.7 (.7) (.) 7(.8) Dia. hrough (.) Dia. Spotface laces. (.8) (.7) (.8) 7 (.7) 8.7 (.9) 8. (.7) 9.8 (7.).8 (.) ank ort "".. lthough the tank port is shown on the left in our sub-plate either may be used. he position of operating lever can be changed as required. For the detail, see the DM- in the previous page.. Lever Operating orque: Not exceeding Nm ( IN. bs.) 7. (.9) 7 (.) (.98) Dia. osition # osition # osition # R9. (R.7). (.8) 9 (.7) 7 (.) 9 (.) 7. (.) (.8) 9.7 (.) 9 (.7) 9 (.) Mounting Surface (s Furnished) Note: For the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page 7.
9 E DIRECIONL CONROLS DMG-- -/9 ank ort "" (.) Dia. hrough 7.(.9) Dia. Spotface laces. (.) (.). (.) (.) Mounting surface: ISO -D-7-- osition #.9 (.7) 9.8 (.7) 7.9 (.87) 9 (.) osition # (.7) Dia. (.) (.) (.97) osition # 7(.8) Dia. hrough (.) Dia. Spotface laces Cylinder ort "". (.). (.) Drain ort "Y" (.8) R (R7.87) 9. (.). (9.). (7.97). (.89) Chain line indicates Spring Offset s (, ). (.) (.) (.) (.97) (.8) Mounting Surface (.) Dia. (s Furnished) wo Locating ins Note: For the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page. DMG-- -/9 9.8 (.77) ank ort "" Drain ort "V" DIMENSIONS IN MILLIMERES (INCHES). (.8). (.). (.9) Y Mounting surface: ISO -E-8--.(.) Dia. hrough (.79) Dia. Spotface laces. (.8) 9. (.) 8 (.) X (.8) osition # osition # 7 (.).8 (.) 7 (.) 77 (.) Cylinder ort "". (.) (.) osition # (.) (.) Indicates Spring Offset s ( ). (.7) Dia. R (R7.87) Indicates Spring Offset s ( ). (.) (.7) 7 (.8) (.7). (.9) (.) Mounting Surface (s Furnished) Note: For the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page. (.) Dia. wo Locating ins (.) 7
10 DMG-- -/9 Mounting surface: ISO -F--- DIMENSIONS IN MILLIMERES (INCHES). (.77) ank ort "" (7.8) 9. (7.) 7. (.).(.8) Dia. hrough (.) Dia. Spotface laces Y Drain ort "V" X 9.. (.7) (.) Cylinder ort "" 79. (.) 8.8 (.) 98 (7.8) 9. (.77) (.) osition # osition # (.7) Dia. R (R.8) (.) (.) (.79) osition # wo Eye olts M8. (.) 7. (.87) Indicates Spring Offset s ( ) Indicates Spring Offset s ( ). (.7) (.) (.) 8 (7.9) (.) (.) Dia. wo Locating ins. (.8).8 (9.) Mounting Surface (s Furnished) Note: For the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page. 8
11 E DIRECIONL CONROLS List of Seals DMG-- -/9 9 X 8 7 Section X-X X 9 8 Item Name of arts art Numbers SO-N-8 SO-N- SO-N-9 Qty. Note: When ordering the o-ring, please specify the seal kit number (KS-DMG--). DM-- -/8/9 DMG-- -/ Item Name of arts art Numbers SO-N- SO-N-8 Qty. ack Up Ring SO--8 7 SO-N- 8 SO-N- Note:. O-rings of Item 8 are not used for DM-.. When ordering the seals, please specify the seal kit number from the table right. DM-- -/8/9 DMG-- -/9 Seal Kit Numbers KS-DM-- KS-DMG-- 9
12 List of Seals DM-, X- -/8/9 DM-, X- -/8/ List of Seal Kits Item Name of arts acking Dust Seal art Numbers DM- DM- UI Y UI Y DKI 7 DKI 7 Qty. DM- - -/8/9 DM- - -/8/9 Seal Kit Numbers KS-DM-- KS-DM-- Note: When ordering the seals, please specify the seal kit number from the table right. DMG-- -/9 DMG-- -/9 DMG-- -/ Section List of Seal Kits Item 9 Name of arts DMG- SO-N- SO-N- SO-N- SO-N-9 SO-N-9 art Numbers DMG- SO-N- SO-N- SO-N- SO-N- SO-N- DMG- SO-N-G SO-N- SO-N- SO-N- SO-N- Qty. DMG- - -/9 DMG- - -/9 DMG-- -/9 Seal Kit Numbers KS-DMG-- KS-DMG-- KS-DMG-- Note: When ordering the seals, please specify the seal kit number from the table right.
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
More informationEMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
More informationThese valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8
DIRCINL CNRLS Manually perated Directional s hese valves may be used to manually shift the spool position and change the direction of oil flow. IC--1005-0 Specifications Numbers DMG-01-C -10 DMG-01-D -10
More informationDIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications
ilot Operated Directional s DIRECIONL CONROLS hese valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. EIC-E-04-0 Specifications Model Numbers Maximum Flow L/min.
More informationSeries Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
More information"G" SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) "G" SERIES SHOCKLESS TYPE
"G" SRIS SHOCKLSS Y NOID ORD DIRCIL VLVS G-DSG-1/3 (1/, 3/) "G" SRIS SHOCKLSS Y NOID CROLLD ILO ORD DIRCIL VLVS G-DSHG-/ (1/, 3/) Mounting Up to 5 Ma (33 SI), 5 L /m in (.1 U.S.GM) ub. C-5 DIRCIL CROLS
More information03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S.
3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic
More information01 SERIES MODULAR VALVES. Pub. EC-1402
SERIES General Information Mounting Surface : ISO --3--, CEO-3, N-D Up to 3.5 Ma (57 SI), 35 L /m in (9.5 U.S.GM) ub. EC- MODULR VLVES he modular valves are functional elements with which a hydraulic system
More informationBST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.
Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications
More informationHigh Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves
igh Response ype roportional Electro-ydraulic s igh response, high precision and high reliability are achieved by a combination of compact and powerful solenoid and spool-position-detection LVD. Direct
More informationRELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled
RELIEF VALVES Remote ontrol / Direct ype ilot Operated / Solenoid ontrolled Up to 5 Ma (3630 SI), 0 L /m in (06 U.S.GM) ub. E-00 Remote ontrol Relief Valves... age 3 his valve is used as a remote control
More informationHigh Pressure, High Flow Rate Modular Valves
eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such
More informationMax. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (
These valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycles machine tools. Switching from rapid traverse
More informationHydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
More informationProportional Electro-Hydraulic Pilot Relief Valves
Proportional Electro-Hydraulic This valve consists of a small DC solenoid and a direct-acting relief valve. It serves as a pilot valve for a low flow rate hydraulic system or a proportional electro-hydraulic
More informationMax. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting
Remote ontrol Relief Valves his valve is used as a remote control valve for pilot operated type pressure control valves. EI--1-0 Graphic Symbol Specifications hreaded onnection Designation F- YB -01 -F
More informationRestrictors / One Way Restrictors
FLOW CONTROLS This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted. Integrated check
More informationDirect Operated Type Directional and Flow Control Valves
Specifications igh Response Type Proportional Electro-ydraulic Directional and Flow Control Valves igh response, high precision and high reliability are achieved be a combination of a compact and powerful
More informationSHUT-OFF TYPE SOLENOID OPERATED DIRECTIONAL VALVES DSPC/DSPG-01/03(1/8,
SHUT-OFF TYP SOLNOID OPRATD VALVS DSPC/DSPG-/(/8, /8) Cartridge Type / Mounting Up to 5 MPa (6 PSI), 8 (. U.S.GPM) Pub. C- The shut-off type solenoid operated directional valves are poppet type solenoid
More informationThrottle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T
More informationSolenoid Controlled Relief Valves
hese valves are a comination of a pilot operated relief valve and a solenoid operated directional valve. Piping etween the two is eliminated as the solenoid valve is directly mounted on the relief valve
More informationPressure Reducing and Relieving Valves
reducing and relieving valves are composite pressure control valves having pressure reducing and counterbalancing functions developed for hydraulic balancing circuits. Specifications RBG-- * - * RBG-6-
More informationPilot Operated Flow Control Valves / Pilot Operated Flow Control and Check Valves
FLOW CONTROLS Flow control of these valves is continuously made by a hydraulically operated pilot piston mechanism which controls opening area of the orifice of the valve. With the use of these valves,
More informationProportional Electro-Hydraulic Flow Control and Relief Valves
Ω Ω Proportional Electro-ydraulic Flow ontrol and Relief Valves This flow control and relief valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since
More information10 SERIES MODULAR VALVES. Pub. EC-1405
SERIES General Information Mounting Surface : ISO ----, CETOP-, NP-D Up to 5 MPa (363 PSI), 8 L /m in ( U.S.GPM) Pub. EC-5 The modular valves are functional elements with which a hydraulic system can be
More informationSeries Proportional Electro-Hydraulic Controls
Proportional Electro-ydraulic Controls Types Graphic Symbols Max. Operating Pressure () Maximum Flow U.S.GPM. 3 3 3 L/min Page Pilot Relief Valves. (3) EDG 67 Relief Valves. (3) EBG 3 6 676 Relieving and
More informationEMulti Purpose Control Valves
IRCTIONAL CONTROLS The Yuken Multi-Purpose Valves Comply with The Needs of Reducing Cost and Size of Your Machine YUKN's Multi Purpose Valve s are compound valves composed of the main valve having four
More information06 SERIES MODULAR VALVES. Pub. EC-1404
6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system
More informationProportional Electro-Hydraulic Directional and Flow Control Valves
Proportional Electro-Hydraulic s These valves are double-deck directional and flow control valves employing as their pilot the electro-hydraulic proportional pressure reducing valves with two proportional
More informationUNLOADING RELIEF VALVES
UNLOADING RELIEF VALVES BUG-6/1 (3/4, 1-1/4) Specifications / Model Number Designation Up to 21 (35 ), L /min (66 ) Pub. E- These valves are used to operate the pumps with minimum load in accumulator circuits
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More informationHigh Pressure, High Flow Rate Modular Valves
High Pressure, High Modular Valves EIC-F-14- MODULR VLVES The modular valves are functional elements with which a hydraulic system can be composed and built easily by stacking them with the mounting bolts.
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationPRESSURE REDUCING AND RELIEVING VALVES
REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 25 (363 ), 25 (33 U.S.GPM) reducing and relieving valves are composite pressure control
More information" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
More informationFLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.
FLOW CONTROLS Valve Type Graphic Symbols Maximum Operating Pressure MPa (PSI) Maximum Flow U.S.GPM 5 5 5 5 5 5 5 Page Flow Control Valves (5) 77 Flow Control and Check Valves (5) 77 Pilot Operated Flow
More informationProportional Electro-Hydraulic Flow Control (and Check) Valves
Ω Proportional Electro-ydraulic Flow Control (and Check) Valves Since the preselected flow rate continuously varies in proportion to the current input to the valve, the system flow rate can be remotecontrolled
More informationPoppet Type Directional Valves
IRCTIONAL CONTROLS Poppet Type irectional Valves Valve Type Graphic Symbols Max. Operating Pressure MPa (PSI) Maximum Flow U. S. GPM.5 5 5 5 5 5 L/min Page Poppet Type Solenoid Operated irectional Valves
More information"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01
"AR" SERIES Variable Displacement-Single Pumps Compensator Type, / AR-FR1 Up to 1 MPa ( PSI),. cm /rev ( CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj. Screw
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationMax. Reversed Free Flow L/min
These Valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycle in machine tools. Switching from rapid traverse
More informationDirectional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
More informationDirectional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More information"A" Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type
A"A" Series PISTON PUMPS Single Pump, Compensator Graphic Symbol M O Specifications Model s A-FRB- A-FRC/H- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- R S- A9- R S- A- R S- Geometric Displacement
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
More information"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3
"AR" SERIES Variable Displacement-Single Pumps Compensator Type,AR / AR- FR Up to MPa ( PSI),. cm /rev (.5 CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj.
More informationPRESSURE REDUCING AND RELIEVING VALVES
REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 5 (363 ), (33 U.S.GPM) reducing and relieving valves are composite pressure control valves
More information10 SERIES MODULAR VALVES
General Information Mounting Surface : ISO 441-A-1-4-A, CETOP-1, NPA-D1 Up to 5 MPa (363 PSI), 8 L /min (11 U.S.GPM) Pub. EC-145 The modular valves are functional elements with which a hydraulic system
More informationE SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts
ydraulic Relief s The electro hydraulic relief valve is designed for compactness and high efficiency. The valve provides fast proportional response to the input current. For linear pressure control a special
More informationPROPORTIONAL ELECTRO-HYDRAULIC CONTROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200
More informationMax. Operating Pressure Kgf/cm 2
In-Line Check Valves DIRCTIONAL CONTROLS These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking pressure specified is the pressure required to open the valve
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationPROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS -Hybrid Components...Page Proportional Electro-Hydraulic Control Valves...Page 7 Proportional Electro-Hydraulic Controls High-accuracy, simple, convenient realizes
More informationMin. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.
Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They
More informationDirectional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationBar 35 PSI 500. Pressure Drop L/M GPM. Flow
NF D3 O E R I N G N D E C H N I C L D RINGS Maximum Flow... See Chart Maximum Operating ressure (, and orts)... 3 ar ( SI) Maximum ank Line ressure... 13 ar (1 SI) Mounting attern... ISO 441--3-4-, NF-D3
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and
More informationFlow Control Valves / Flow Control and Check Valves
LOW CONTROLS These valves are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (viscosity of the fluid).
More informationHydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire
ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are
More informationDirectional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
More informationVARIABLE DISPLACEMENT PISTON PUMPS
VRIBLE DISPLCEMENT Pump Type "R" Series Variable Displacement Piston Pumps Maximum Operating MPa (PSI) () Geometric Displacement cu. in./rev... cm /rev R R Catalogue No. Pub. EC- "" Series Variable Displacement
More informationEH SERIES PROPORTIONAL ELECTRO-HYDRAULIC CONTROL VALVES
Pub. EC- E SERIES ELECTRO-YDRAULIC CONTROL VALVES Pilot Relief / Relief / Reducing and Relieving / Flow Control / Flow Control and Relief / Directional and Flow Control Up to. ( PSI), L/min (6 U.S.GPM)
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More information" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps Compensator Type Constant Power (Torque) Control Type Load Sensing Type Pump Type Graphic Symbol Geometric Displacement cu. in./rev...5 5 5 5 5 cm /rev Maximum
More informationPilot operated pressure relief valve
0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationProportional Electro-Hydraulic Relieving and Reducing Valves
These valves consist of a small size but high performance EH series electro-hydraulic proportional pilot relief valve and reducing valve with relief function. The valves control the system pressure proportionally
More informationDirect Operated Type Solenoid Operated Proportional Throttle Valve
Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4 b X EMS-3 Features hese proportional throttle directional control valves perform spool position feedback
More informationPROPORTIONAL ELECTRO-HYDRAULIC CONTROLS
H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationDirect Operated Type Solenoid Operated Proportional Throttle Valve
efore using the product, please check the For latest information, DF catalogs and operation manuals Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4
More informationMODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.
F MODULES YUKEN's are stack type valves, and require no piping. They not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking systems
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
More informationDirectional Control Valves
echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available
More informationAccessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
More informationOBE (On-Board Electronics) Type Direct Operated Linear Servo Valves (Size: 01 & 03) LSVG-01-EH-*-**-**-10, LSVG-03EH-*-**-**-10/1006
NO. 10 01E September 1, 2010 Public Relations Group Products Publicity Section Sales Administration Department Hamamatsucho Seiwa Bdg., 4-8, Shibadaimon 1-chome, Minato-ku, Tokyo 105-0012, Japan Tel: +81-3-3432-2113
More informationDirectional Controls
Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000
More informationLow Noise Type Solenoid Controlled Relief Valves
he low-noise solenoid controlled relief valve is a combination of a low-noise type pilot operated relief valve and a solenoid operated directional valve. It is used for no-load pump operation by using
More informationNDR Series Rotor Pack
efore using the product, please check the DR Series Rotor ack Features Low noise chieves a noise level of no greater than 0 d () and there is no need to worry about hydraulic noise even at factories in
More informationAR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps
Variable Displacement Piston Pumps AR Series Variable Displacement Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa Variable
More informationA Series Variable Displacement Piston Pumps
A Series Variable Displacement Piston Pumps A37 A56 A1637 A16 A10 A Series Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement cm 3 /rev 1 5 10 0 50 100 00 300 Maximum Operating
More informationDirectional Controls
VICKERS Directional Controls DG3V-7, 20 Series, ilot Operated DG5V-7, 40 Series, Solenoid Controlled, ilot Operated ISO 440 Size 07 ypical Section DG5V-7-2C Spring-Centered Valve Example Basic Characteristics
More informationCONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More informationModular Valves. Ratings
High Pressure, High Flow Rate Features Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly
More information50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination
T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance
More informationA Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics.
EIC--12- PISTON PUMPS Series Variable Features High efficiency Under the conditions of pressure 16 Kgf/cm² and speed 18 r/min. volumetric efficiency is over 98% and the overall efficiency is over 9%. Low
More informationAR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%
PISTON PUMPS EIC--11- Features Smaller in Size and Lighter in Mass s indicated in the dimensional comparison presented below, the R1 is smaller than the 1(3 design). lso, the mass of R1 is substantially
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More informationE SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts
s The electro hydraulic relief valve is designed for compactness and high efficiency. The valve provides fast proportional response to the input current. For linear pressure control a special venting feature
More information"A" Series Piston Pumps Variable Displacement-Single Pumps Electro-Hydraulic Proportional Pressure & Flow Control. Type
Variable Displacement-Single Pumps Electro-Hydraulic Proportional & Flow Type 6 / / 7 / 6 / 7 / 9 / Model Number Designation Safety valve Input Signal for Flow Input Signal for mplifier Proportional Solenoid
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona
More informationBankable Control Valves
Hydraulics ankable Control Valves Catalog 3123/US Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS
More information