Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: July 01,

Transcription

1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY CD/US Effective: July 01, 2012

2 WRNING - USER RESONSIILIY FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS DESCRIED HEREIN OR RELED IEMS CN CUSE DEH, ERSONL INJURY ND ROERY DMGE. his document and other information from arker-hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. he user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. he user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from arker or its subsidiaries or authorized distributors. o the extent that arker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. OFFER OF SLE he items described in this document are hereby offered for sale by arker-hannifin Corporation, its subsidiaries or its authorized distributor. his offer and its acceptance are governed by the provisions stated in the detailed "Offer of Sale" elsewhere in this document. Copyright 2012, arker Hannifin Corporation. ll Rights Reserved.

3 Contents Hydraulic ower Units D, H and V-ak Series Contents D, H, and V-ak Series Introduction Ordering Information Installation Information echnical Information V-ak Low rofile Series Introduction Ordering Information Installation Information...30 echnical Information dditional Installation Information...43 dditional echnical Information...44 Conversion Equations...45 Offer of Sale...47 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 1

4 Introduction Hydraulic ower Units D, H and V-ak Series Quick Reference Data Chart ump Flow Electrical ump ank Size LM (GM) Motors Maximum* Model No. Liters 1725 RM KW (H) ar (SI) D -aks 18.9 (5) ( ) 0.37 (0.5) (3) 207 (3000) H-aks 37.9 (10), 75.7 (20), (30), (40) ( ) 0.37 (0.5) (20) 207 (3000) V-aks 37.9 (10), 75.7 (20), (30), (40) ( ) 1.5 (2) (20) 207 (3000) V (80) ( ) (7 1/2-40) 207 (3000) * See pump/motor combination, maximum pressure charts. 2 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

5 echnical Information Hydraulic ower Units D, H and V-ak Series Warranty he hydraulic components on these arker ower Units are warranteed for one year. his warranty may be extended to two years by using and properly maintaining arker filters. Installation Data: See Installation/Maintenance Manual for specific recommendations pertaining to start-up, system cleanliness, fluids, temperature and other important factors relative to proper installation and use of these power units. Standard Features Vertical Design Submerged ump Spare Return orts recision ump Mounting dapters Suction Strainer Glycerine Filled ressure Gage with Shut Off Oil Level Gage with hermometer Relief Valve reather and Fill Cap SE Drain lug arker Connector echnology enefits Saves Floor Space Quieter Operation, Elimination of otential Leak oint Longer ump Life rotects ump from Contamination Improved Diagnostics Helps to Maintain rouble-free erformance rotects gainst System Shock Easy o Fill Reservoir revents Leaks Schematic Symbol (Hydraulic Schematic - asic Unit) O OION MNIFOLD O OION MNIFOLD SE -12 M SRE REURN D & H-K SIC UNI NO OIONS OR CCESSORIES O OION MNIFOLD SE -12 M OMI OION COM CONROL SRE REURN V-K SIC UNI NO OIONS OR CCESSORIES OMI OION UM COMENSOR O OION MNIFOLD arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 3

6 HY CD/US D-aks Ordering Information Hydraulic ower Units D-aks D5 W Reservoir 18.9 Liters (5 Gal) ressure Control ump Flow No Motor (See Note) ** Electric Motor Manifold Directional Control Valve *Manapak Control Valves Options and ccessories Omit J ressure Control System ressure Relief Valve Only System ressure Relief Valve with Unloading Valve (2-Way 120VC) N.O. (Energize coil to close) System ressure Relief Valve with Unloading Valve (2-Way 24VDC) N.O. (Energize coil to close) ump Flow Used Electric Motor Description H (KW) - RM - Frame - hase U1.5 (.37) C (.75) C (.75) C - 3 G 2 (1.5) C - 3 K 3 (2.2) C - 3 Single phase electric motors are rated as follows: 115/230V, 1H, EFC - 60 Hz 1800 RM hree phase electric motors are rated as follows: /460V, 3H, EFC - 60 Hz 1800 RM Consult factory for other motor speeds (RM) and voltages. ** Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent. Motor coupling will have interface for a 56C frame motor. O S3 M33 orting lock/subplate or Manifold ype ressure and Return ort lock with Safety Relief Valve D03 Single Station Subplate with Safety Relief Valve D03 Multistation arallel Circuit Manifold with Safety Relief Valve Supply/Return ort or ctuator ort Size & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-8 Str. hr'd Manifolds are mounted vertically. ottom station is number 1. Other Convertible to S3 Option Spare & SE-10 orts Spare G ort SE Manapak Control Valves Function Flow Control Meter-Out ilot Operator Check Valve Model Number NF Mounting ad Nominal Flow GM (LM) FM2DDKN D03 7 (26.5) COM2DDN D03 7 (26.5) Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Circuit Symbol Options and ccessories Function Model Number echnical Data ir/oil: 0.7 H (52 kw) 1* Exchanger RM GM (11.4 LM) H K L O R1 R2 Directional Control Valve Model Number ressure Filter Check Valve ump Outlet ypass Check (on Heat Exch) Return Filter Combination Float/emp. Switch N.O. Float Up Combination Float/emp. Switch Float Up NF Mounting ad 15110QRS D370MOMF05 C1020S C 45LM (12 GM) Nominal Flow GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) D1VW008CN*** D03 7 (26.5) Description Double (Spr. Ctr) Double (Spr. Ctr) Double (Spr. Ctr) Units less valves will be supplied with station cover plates installed. Microglass II Element Vis. Ind. 50 SI (3.4 bar) ypass 2 SI (0.14 bar) 3 GM (11.4 LM) 5 SI (0.34 bar) Cracking ressure 7 SI (0.48 bar) 3 GM (11.4 LM) 65 SI (4.5 bar) Cracking ressure *Heat rejection based on flow given with a 40 F differential between transfer medium. Circuit Symbol Cellulose Element Ind. Gage - 15 SI (1.03 bar) ypass Max. Oil Flow Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.O.) Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.C.) = Omit if not required 4 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

7 Notes Hydraulic ower Units arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 5

8 H-aks Ordering Information Hydraulic ower Units H-aks W Reservoir ressure Control ump Flow No Motor (See Note) ** Electric Motor Manifold H1* 10 (37.9) H2 20 (75.7) H3 30 (113.6) Reservoir Size Gallons (Liters) H4 40 (151.4) *vailable up to 7.5 KW (10 H) motor only. Omit J ressure Control* System ressure Relief Valve Only System ressure Relief Valve with Unloading Valve (2-Way 120VC) N.O. (Energize coil to close) System ressure Relief Valve with Unloading Valve (2-Way 24VDC) N.O. (Energize coil to close) ump Flow Used Electric Motor Description H (KW) - RM - Frame - hase U1*.5 (.37) C (.75) C (.75) C - 3 G 2 (1.5) C - 3 K 3 (2.2) C - 3 L 5 (37.5) C - 3 M 7.5 (5.6) C - 3 N 10 (7.5) C (11.2) C - 3 S 20 (14.9) C - 3 * U1 leadtime is 2 weeks Single phase electric motors are rated as follows: 115/230V, 1H, EFC - 60 Hertz 1800 RM hree phase electric motors are rated as follows: /460V, 3H, EFC - 60 Hertz 1800 RM Consult factory for other motor speeds (RM) and voltages. vailable with H2, H3 and H4 tanks only. ** Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent to frame size of motor to be used. O S3 S5 M33 M35 M53 M55 orting lock/subplate or Manifold ype ressure and Return ort lock with Safety Relief Valve D03 Single Station Subplate with Safety Relief Valve D05 Single Station Subplate with Safety Relief Valve D03 Multistation arallel Circuit Manifold with Safety Relief Valve D05 Multistation arallel Circuit Manifold with Safety Relief Valve Supply/Return ort or ctuator ort Size & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-8 Str. hr'd Other Convertible to S3 Option Spare & SE-10 orts Spare & SE-12 orts Spare G ort SE-6 Spare G ort SE-6 Manifolds are mounted vertically. ottom station is number 1. = Omit if not required 6 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

9 HY CD/US H-aks Ordering Information Hydraulic ower Units H-aks Directional Control Valve *Manapak Control Valves Options and ccessories Valve Model Number Function NF Mounting ad Valve Model Number Nominal Flow GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) F D3W1CN** D05 20 (75.7) G D3W4CN** D05 15 (56.8) D1VW008CN*** D03 7 (26.5) W D3W8CN** D05 15 (56.8) NF Mounting ad Nominal Flow GM (LM) 1 Flow Control FM2DDKN D03 7 (26.5) 2 Flow Control FM3DDKN D05 12 (45.4) 3 ilot Operator Check COM2DDN D03 7 (26.5) 4 ilot Operator Check COM3DDN D05 12 (45.4) *Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Description Double (Spr. Ctr) Double (Spr. Ctr) Double (Spr. Ctr) Double (Spr. Ctr) Double (Spr. Ctr) Double (Spr. Ctr) Units less valves wil be supplied with station cover plates installed. Circuit Symbol Circuit Symbol Function Model Number echnical Data 1* 2* Return Heat Exchanger Return Heat Exchanger RM RM H ressure Filter 15110QRS K L O R1 R2 Check Valve ump Outlet ypass Check (on Heat Exch) Return Filter Combination Float/emp. Switch N.O. Float Up Combination Float/emp. Switch Float Up "D" & "C" Series C1220S C 12 GM (45 LM) ir/oil:.7 H (0.52 kw), 7 GM (26.5 LM) kw Motors only ir/oil: 1.5 H (1.1 kw), 7 GM (26.5 LM) kw Motors only Microglass II Element, Vis. Ind SI (3.49 bar) ypass - 4 SI (0.27 bar), 7 GM (26.5 LM) 5 SI (0.34 bar) Cracking ressure 25 SI (1.72 bar) 15 GM (56.8 LM) (65 SI) 4.5 bar Cracking ressure Cellulose Element, Ind. Gage - 15 SI (1.03 bar) ypass Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.O.) Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.C.) *Heat rejection based on flow given with a 40 F differential between transfer medium. = Omit if not required arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 7

10 V-aks Ordering Information Hydraulic ower Units V-aks OR Reduced Flow W Reservoir ressure Control ump Control ump Flow No Motor (See Note) ** Electric Motor Manifold Reservoir Size Gallons (Liters) V1* 10 (37.9) V2 20 (75.7) V3 30 (113.6) V4 40 (151.4) *vailable up to 10 H (7.5 kw) motor only. Omit J C CJ D DJ F Omit * H** ressure Control Single ressure Remote Compensator Single ressure Remote Compensator with Low ressure Standby Single ressure Remote Compensator with Low ressure Standby, 24 VDC i-ressure Remote Compensator i-ressure Remote Compensator, 24VDC i-ressure Remote Compensator with Low ressure Standby i-ressure Remote Compensator with Low ressure Standby, 24VDC rovision for Customer Supplied Remote Control Relief Valve ump Control Std. Remote Compensator Load Sense Flow Control Horsepower Limiting *_SE-6 sense port line will be supplied in topplate. ** Horsepower setting will be at max. flow & pressure obtainable with motor selected. Lead time is four weeks for shaded items. ump Flow RM ump Used and Description 7 7 GM (29.5 LM) V16 - Std. Remote Compensator * Specify in GM Destroked Max. Volume 2 GM Min GM (59 LM) V33 - Std. Remote Compensator ** Specify in GM Destroked Max. Volume 8 GM Min. *Unless otherwise specified, units are shipped at max. flow rate 7.8 GM (29.5 LM) at 1800 RM. When reduced flow setting is required, specify pump setting in.5 GM (1.9 LM) increments. Example: 5, 5.5, 6, 6.5 with a 2 GM (7.6 LM) minimum flow. **Unless otherwise specified, units are shipped at max. flow rate 15.6 GM (59 LM) at 1800 RM. When reduced flow setting is required, specify pump setting in.5 GM (1.9 LM) increments. Example: 11, 11.5, 12, 12.5 with a 8 GM (30.3 LM) minimum flow. Electric Motor Description H (KW) - RM - Frame - hase G 2 (1.5) C - 3 K 3 (2.2) C - 3 L 5 (37.5) C - 3 M 7.5 (5.6) C - 3 N 10 (7.5) C (11.2) C - 3 S 20 (14.9) C - 3 Electric motors are /460V, 60 Hz 3H 1800 RM EFC. Consult factory for other motor speeds (RM) and voltages. vailable with V2, V3 and V4 tanks only. ** Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent to frame size of motor to be used. O S3 S5 M33 M35 M53 M55 orting lock/subplate or Manifold ype ressure and Return ort lock with Safety Relief Valve D03 Single Station Subplate with Safety Relief Valve D05 Single Station Subplate with Safety Relief Valve D03 Multistation arallel Circuit Manifold with Safety Relief Valve D05 Multistation arallel Circuit Manifold with Safety Relief Valve Supply/Return ort or ctuator ort Size & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-8 Str. hr'd Manifolds are mounted vertically. ottom station is number 1. Other Convertible to S3 Option Spare & SE-10 orts Spare & SE-12 orts Spare G ort SE-6 Spare G ort SE-6 Example: V*12**-- = Std. ump Destroked to 12 GM (45.4 LM) V*11.5**-- = Load Sense ump Destroked to 11.5 GM (43.5 LM) = Omit if not required 8 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

11 HY CD/US V-aks Ordering Information Hydraulic ower Units V-aks Directional Control Valve *Manapak Control Valves Options and ccessories Directional Control Valve Model Number Manapak Control Valves Function Flow Control Flow Control ilot Operator Check ilot Operator Check NF Mounting ad Valve Model Number Nominal Flow GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) F D3W1CN** D05 20 (75.7) G D3W4CN** D05 15 (56.8) Units less valves wil be supplied with station cover plates installed. NF Mounting ad Nominal Flow GM (LM) FM2DDKN D03 7 (26.5) FM3DDKN D05 12 (45.4) COM2DDN D03 7 (26.5) COM3DDN D05 12 (45.4) *Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Description Double (Spr. Ctr) Double (Spr. Ctr) Double (Spr. Ctr) Double (Spr. Ctr) Circuit Symbol Circuit Symbol * 1* 2* Options and ccessories Function Model Number echnical Data ump Case Heat Exchanger Return Heat Exchanger Return Heat Exchanger RM RM RM H ressure Filter 15110QRS K L Check Valve ump Outlet ypass Check (on Heat Exch) "D" & "C" Series C1220S65 N Return Filter 40CN110 O R1 R2 Return Filter Combination Float/emp. Switch N.O. Float Up Combination Float/emp. Switch Float Up 1210C 12 GM (45 LM) ir/oil: 0.7 H (0.52 kw), GM (1.9 LM) 2-15 H ( kw) Motors ir/oil: 0.7 H (0.52 kw), 7 GM (26.5 LM) 2-5 H ( kw) Motors only ir/oil: 1.5 H (1.1 kw), 7 GM (26.5 LM) H ( kw) Motors only Microglass II Element, Vis. Ind SI (3.49 bar) ypass - 4 SI (0.27 bar), 7 GM (26.5 LM) 5 SI (0.34 bar) Cracking ressure 25 SI (1.72 bar) 15 GM (56.8 LM) (65 SI) 4.5 bar Cracking ressure Microglass II Element, Visual 25 SI (1.72 bar) Indicator 3 SI (0.21 bar) 7 GM (26.5 LM) Cellulose Element, Ind. Gage - 15 SI (1.03 bar) ypass Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.O.) Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.C.) *Heat rejection based on flow given with a 40 F differential between transfer medium. = Omit if not required arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 9

12 Installation Information Hydraulic ower Units Series H, V-acks Dimensions - asic D-ak (18.9 Liter (5 Gallon) ank) Inch equivalents for millimeter dimensions are shown in (**). Filter Option Reference SRE REURN OR 1/2" NF WIH DRO IE 19.1 (.75) 31.8 (1.25) (15.0) (13.5) (12.5).56 DI. MOUNING HOLES - 4 LCES (12.5) (10.0) SRE REURN OR 1/2" NF WIH DRO IE ELECRIC MOOR O & S3 OION MNIFOLD ( & LOCK & D03 SINGLE SION) SHOWN WIH OION O REURN FILER SYSEM RELIEF VLVE 22.9 (.9) O & S3 OION MNIFOLD ( & LOCK & D03 SINGLE SION) SIC UNI RESSURE GGE WIH NEEDLE VLVE SRE REURN OR 1/2" NF WIH DRO IE * O ( & LOCK) OR S3 ( D03 SULE) SHOWN-SEE MNIFOLD OIONS FILLER REHER (10.36) 38.1 (1.5) (12.12) OIL LEVEL SIGH GGE NK DRIN SE-12 (LUGGED) 3.1 (.12) M3* & "C3*" OION MNIFOLD (MULI-SION D03 MNIFOLD) SHOWN WIH OION O REURN FILER Motor Motor Description Dimension KW(H)-RM-Frame-hase * U1.37 (.5) CZ (10.62) C1.56 (.75) CZ (11.62) 1.75 (1) CZ (11.62) 3.75 (1) CZ (10.18) F 1.1 (1.5) CZ (11.18) G 1.5 (2) CZ (12.06) K 2.2 (3) CZ (13.44) * Reference dimension consult factory if critical to application. G 10 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

13 HY CD/US Installation Information Hydraulic ower Units Series H, V-acks Dimensions - asic H1 & V1 (10 Gallon ank) Inch equivalents for millimeter dimensions are shown in (**) (.75) 33.3 (1.31) (19.00) (17.50) (16.63).56 DI. MOUNING HOLES - 4 LCES Filter Option Reference SRE REURN OR 3/4" NF WIH DRO IE SRE REURN OR 3/4" NF WIH DRO IE (14.00) ELECRIC MOOR (16.63) SYSEM RELIEF VLVE FOR H-KS SFEY RELIEF VLVE FOR V-KS O & S5 OION MNIFOLD ( & LOCK & D05 SINGLE SION) SHOWN WIH OION O REURN FILER 22.9 (.9) O & S5 OION MNIFOLD ( & LOCK & D05 SINGLE SION) SIC UNI UM COMENSOR CONROL FOR V-KS (NO INCLUDED ON H-KS) ROION RROW RESSURE GGE WIH NEEDLE VLVE -D03 -D05 -D03 -D05 * O ( & LOCK) OR S5 ( D05 SULE) SHOWN-SEE MNIFOLD OIONS -D03 -D05 -D03 -D05 FILLER REHER SRE REURN OR 3/4" NF WIH DRO IE OIL LEVEL SIGH GGE (15.36) NK DRIN SE-12 (LUGGED) 38.1 (1.5) (16.12) 3.1 (.12) Motor Motor Description Dimension KW(H)-RM-Frame-hase * U (.5) C (10.50) (0.75) C (.75) C (11.00) (0.75) (1) C (11.75) (0.75) (1) C (10.50) (0.75) F 1.1 (1.5) C (10.75) (0.75) G 1.5 (2) C (11.75) (0.75) K 2.2 (3) C (12.62) (0.75) L 3.7 (5) C (14.38) (1.13) M 5.6 (7.5) C (16.00) (2.63) N 7.5 (10) C (16.28) (2.63) * Reference dimension consult factory if critical to application. M5* OION MNIFOLD (MULI-SION D05 MNIFOLD) SHOWN WIH OION O REURN FILER G arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 11

14 HY CD/US Installation Information Hydraulic ower Units Series D, H, V-acks Dimensions - asic H2, 3, 4 & V2, 3, 4 (20, 30, 40 Gallon ank) Inch equivalents for millimeter dimensions are shown in (**) (22.5) (21.0) (20.0) Filter Option Reference SRE REURN OR 3/4" NF WIH DRO IE OU 38.1 (1.5).56 DI. MOUNING HOLES - 4 LCES IN (20.0) (17.0) SRE REURN OR 3/4" NF WIH DRO IE ELECRIC MOOR UM REFILL OR FOR V-KS (8-15 GM ONLY) 22.9 (.9) O & S5 OION MNIFOLD ( & LOCK & D05 SINGLE SION) SIC UNI SYSEM RELIEF VLVE FOR H-KS SFEY RELIEF VLVE FOR V-KS UM COMENSOR CONROL FOR V-KS (NO INCLUDED ON H-KS) ROION RROW O & S5 OION MNIFOLD ( & LOCK & D05 SINGLE SION) SHOWN WIH OION N REURN FILER RESSURE GGE WIH NEEDLE VLVE * O ( & LOCK) OR S5 ( D05 SULE) SHOWN-SEE MNIFOLD OIONS -D03 -D05 -D03 -D05 FILLER REHER -D03 -D05 -D03 -D05 LIF EYES - 2 LCES OIL LEVEL SIGH GGE SRE REURN OR 3/4" NF WIH DRO IE OU C NK DRIN SE-12 (LUGGED) IN 38.1 (1.5) (19.5) 3.1 (.12) Motor Motor Description Dimension KW(H)-RM-Frame-hase * U1.37(.5) C (10.50) (.75) C1.56(.75) C (11.00) (.75) 1.75(1) C (11.75).75 (19.05) 3.75(1) C (10.50) (.75) F 1.1(1.5) C (10.75) (.75) G 1.5(2) C (11.75) (.75) K 2.2(3) C (12.62) (.75) L 3.7(5) C (14.38) (1.13) M 5.6(7.5) C (16.00) (1.38) N 7.5(10) C (16.28) (1.38) 11.2(15) C (17.63) (3.35) S 14.9(20) C (19.3) (3.35) * Reference dimension consult factory if critical to application. Reservoir Reservoir Dimension Size C H2 or V2 H3 or V3 H4 or V Liters (20 Gal) (19.36) Liters (30 Gal) (23.62) 75.7 Liters (40 Gal) (28.86) M5* OION MNIFOLD (MULI-SION D05 MNIFOLD) SHOWN WIH OION N REURN FILER G 12 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

15 echnical Information Hydraulic ower Units Series D, H, V-acks Manifold Options Inch equivalents for millimeter dimensions are shown in (**). SULY OR SE-10 REURN OR SE-10 SULY OR SE-10 REURN OR SE-10 REURN OR SE-10 D03 COVER LE OR SE-8 OR SE (3.44) 52.3 (2.06) REURN OR SE-10 D03 MNG SURFCE OR SE-8 OR SE (1.25) UM SULY 44.2 (1.75) UM SULY 85.9 (3.38) 47.8 (1.88) 22.0 (.87) 44.5 (1.75) O MNIFOLD OION FOR SULY & REURN CONNECIONS (18.9 LIER (5 GL.) RESERVOIR UNIS) S3 SULE OION FOR USE WIH D1VW VLVE (NF D03) SULY OR SE-12 REURN OR SE-12 SULY OR SE-12 REURN OR SE-12 REURN OR SE-12 REURN OR SE-12 UM SULY D05 COVER LE OR SE-10 OR SE (1.75) 53.8 (2.12) 44.5 (1.75) REURN OR SE-12 REURN OR SE-12 UM SULY D05 MNG SURFCE OR SE-10 OR SE (1.25) (4.12) -D03 -D05 -D03 -D (1.50) -D03 -D05 -D03 -D (.69) 53.8 (2.12) O MNIFOLD OION FOR SULY & REURN CONNECIONS (37.9, 75.7, 113.6, LI (10, 20, 30, 40 GL) RESERVOIR UNIS) S5 SULE OION FOR USE WIH D3W VLVE (NF D05) arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 13

16 HY CD/US echnical Information Hydraulic ower Units Series D, H, V-acks Manifold Options Inch equivalents for millimeter dimensions are shown in (**). Option M33/M35 "G" SE-6 G UM SULY REURN OR SE (2.12) ER SION D03 MNG SURFCE ""&""ORS SE-8 3 ND 5 SIONS) 33.3 (1.31) ND 5 SION VIL. G 54.0 (2.12) M33 ND M (0.87) 3 ND 5 SION MNIFOLD OIONS FOR USE WIH NF D03 VLVES 44.5 (1.75) 1.06 Option M53/M55 REURN OR SE-12 "G" SE-6 G UM SULY D05 MNG SURFCE ""&""ORS SE-8 3 ND 5 SIONS 31.8 (1.25) 82.6 (3.25) ER SION (6.50) 3 ND 5 SION VIL. G 82.6 (3.25) 17.5 (0.69) 54.0 (2.12) 39.6 (1.56) M53 ND M55 3 ND 5 SION MNIFOLD OIONS FOR USE WIH NF D05 VLVES 14 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

17 echnical Information Hydraulic ower Units Series D, H, V-acks ressure Control Option "" - Unloading Valve URIGH INVERED URIGH INVERED G "H"K WIH "S3" MNIFOLD LM ( GM) FLOW RES ONLY (CONNECED O SYSEM REURN LINE) "H"K WIH "M3*" MNIFOLD LM ( GM) FLOW RES ONLY (CONNECED O SYSEM REURN LINE) -D03 -D05 -D03 -D05 -D03 -D05 -D03 -D05 "H"K WIH "OMI","S5","S6","M5*","M6*" MNIFOLDS LM ( GM) FLOW RES ONLY (LUMED DIRECLY CK O NK) "H"K WIH "OMI","S3","S5","S6","M3*","M5*","M6*" MNIFOLDS LM ( GM) FLOW RES ONLY (LUMED DIRECLY CK O NK) arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 15

18 echnical Information Hydraulic ower Units Series D, H, V-acks ressure Control Option "" - Unloading Valve URIGH INVERED URIGH INVERED G "D"K WIH "S3" MNIFOLD (CONNECED O SYSEM REURN "D"K WIH "M3*" MNIFOLD (CONNECED O SYSEM REURN URIGH INVERED "D"K WIH "OMI" MNIFOLD (CONNECED O SYSEM REURN 16 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

19 echnical Information Hydraulic ower Units Series V-acks V-ak Compensator Options OMI OION SINGLE RESSURE REMOE COMENSOR OION SINGLE RESSURE REMOE COMENSOR W/LOW RESS. SNDY HIGH SI LOW SI LOW SOL SNDY SE -6 HIGH SOL SOLENOID IS LOW W WIH DIN CONNECOR ND MNUL OVERRIDE U. VEN OR (SE-6) UM COMENSOR CONROL DJUSMEN LOW RESS. SNDY (N.O.) ENERGIZE O UILD RESSURE UM COMENSOR CONROL DJUSMEN HI SOL LO SOL LO HI C OION I-RESSURE REMOE COMENSOR HIGH SI LOW SI D OION I-RESSURE REMOE COMENSOR W/LOW RESS. SNDY HIGH SI LOW SI LOW SOL SNDY HIGH SOL HIGH SOL SOLENOID IS LOW W WIH DIN CONNECOR ND MNUL OVERRIDE HIGH RESS. SOLENOID (N.O.) ENERGIZE FOR HIGH RESSURE UM COMENSOR HIGH RESS. CONROL SOLENOID IS LOW W WIH DIN CONNECOR ND MNUL OVERRIDE HIGH RESS. SOLENOID (N.O.) ENERGIZE FOR HIGH RESSURE LOW RESS. SNDY (N.O.) ENERGIZE FOR LOW RESSURE HI SOL LO SOL HI SOL LO SOL LO HI LO HI UM COMENSOR LOW RESS. CONROL UM COMENSOR HIGH RESSURE CONROL UM COMENSOR LOW RESSURE CONROL F OION ROVISION FOR CUSOMER SULIED REMOE COMENSOR SE FLRE UM COMENSOR RESSURE (INLE) OR UM COMENSOR NK (REURN) OR SE-6 37 FLRE & ORS CH OINS FOR CUSOMER SULIED REMOE COMENSOR arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 17

20 echnical Information Hydraulic ower Units Series D, H, V-acks ccessory Options D & H-KS Option Return Line ir/oil Heat Exchanger (1 or 2) Option H ressure Filter Option K Check Valve ump Outlet Option L Check Valve Return Line ypass Option N Return Line Filter Option O Return Line Filter Option R Combination emp/level Switch (R1 or R2) SEE MNIFOLD OIONS SE-10 SE-6 H L N O 1/2"N-"D"KS 3/4"N-"H"KS SE-10 K M R SE -12 V-KS Option ump Case Heat Exchanger Option Return Line ir/oil Heat Exchanger (1 or 2) Option H ressure Filter Option K Check Valve ump Outlet Option L Check Valve Return Line ypass Option N Return Line Filter Option O Return Line Filter Option R Combination emp/level Switch (R1 or R2) SEE MNIFOLD OIONS SE-10 SE-6 H L N O SE-10 K 3/4" N M SEE COMENSOR OIONS R SE -12 CONNECED O REURN LINE WIH OION "" 18 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

21 echnical Information Hydraulic ower Units Series D-acks Dimensions - D-ak (5 Gallon ank) ccessories Inch equivalents for millimeter dimensions are shown in (**). SRE REURN OR 1/2" NF WIH DRO IE (NO SHOWN) 19.8 [0.78] 10.8 [0.43] OION "1" IR/OIL HE ECHNGER [5.1] REF. OION "N" OR "O" REURN FILER 16.3 [0.64] DIM "" REF OION "R1" OR "R2" FLO/EM. SWICH (1/2" ELEC. CONN.) OION "H" RESSURE FILER arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 19

22 HY CD/US echnical Information Hydraulic ower Units Series H, V-acks Dimensions - H1 & V1 (10 Gallon ank) ccessories Inch equivalents for millimeter dimensions are shown in (**) [0.67] 10.2 [0.40] 12.7 [0.50] SRE REURN OR 3/4" NF WIH DRO IE OION "M", "N", "O" OR "V" REURN FILER 32.0 [1.26] OION "1" IR/OIL HE ECHNGER OION "" UM CSE HE ECHNGER (USED ON "V" KS ONLY) 26.5 [1.04] 89.7 [3.53] DIM "" REF OION "R1" OR" R2" FLO/EM. SWICH (1/2" ELEC. CONN.) DIM "" REF -D03 -D05 -D03 -D05 OION "H" RESSURE FILER -D03 -D05 -D03 -D05 FLO 2" ELOW LOW LEVEL 20 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

23 HY CD/US echnical Information Hydraulic ower Units Series H, V-acks Dimensions - H2, 3, 4 & V2, 3, 4 (20, 30, 40 Gallon ank) ccessories Inch equivalents for millimeter dimensions are shown in (**) [4.14] 53.5 [2.11] 19.1 [0.75] OION "N" OR "O" REURN FILER SRE REURN OR 3/4" NF WIH DRO IE OION "2" IR/OIL HE ECHNGER [5.04] OION "" UM CSE HE ECHNGER (USED ON V-KS ONLY) [5.10] [4.90] 89.7 [3.53] DIM "" REF OION "R1" OR "R2" FLO/EM. SWICH (1/2"ELEC. CONN.) DIM "" REF -D03 -D05 -D03 -D05 -D03 -D05 -D03 -D05 OION "H" RESSURE FILER FLO 2" ELOW LOW LEVEL q 38.0 [1.49] arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 21

24 echnical Information Hydraulic ower Units Series D, H, V-acks erformance Data Maximum Working ressures * * * * Represents maximum operating pressure with pump/motor combination. his will be the maximum relief valve or compensator setting. * * * * Represents maximum operating pressure with pump/motor combination. When used on power unit products this will represent a ar (3000 SI) relief valve or compensator setting. D & H-ak - ump/motor Combinations Maximum Operating ressure ar (SI) ump Motor KW (H) Flow at.37 (.5).60 (.75).75 (1) 1.1 (1.5) 1.5 (2) 2.2 (3) 3.7 (5) 5.6 (7.5) 7.5 (10) 11.2 (15) 14.9 (20) 1725 RM Max Operating ressure (heoretical) LM (GM) 3.4 (0.9) 55.8(810) 84.1(1220) 111.7(1620) 167.5(2430) 223.4(3240) 4.9 (1.3) 40.0(580) 60.0(870) 80.0(1160) 119.3(1730) 159.3(2310) 239.2(3470) 6.8 (1.8) 29.6(430) 44.1(640) 59.3(860) 88.3(1280) 118.6(1720) 177.2(2570) 275.0(3988) 8.7 (2.3) 22.8(330) 34.5(500) 46.2(670) 69.0(1000) 92.4(1340) 138.6(2010) 231.0(3350) 10.2 (2.7) 20.0(290) 30.3(440) 40.0(580) 60.0(870) 80.7(1170) 120.7(1750) 201.3(2920) 275.0(3988) 12.1 (3.2) 15.9(230) 24.1(350) 31.7(460) 48.3(700) 64.1(930) 96.5(1400) 160.6(2330) 241.3(3500) 17.0 (4.5) 11.0(160) 17.2(250) 22.8(330) 33.8(490) 45.5(660) 69.0(1000) 115.1(1670) 172.4(2500) 228.9(3320) 19.3 (5.1) 10.3(150) 15.2(220) 20.7(300) 30.3(440) 40.7(590) 61.4(890) 102.0(1480) 153.1(2220) 204.1(2960) 275.0(3988) 23.8 (6.3) 8.3(120) 12.4(180) 16.5(240) 24.8(360) 33.1(480) 49.6(720) 82.7(1200) 124.1(1800) 165.5(2400) 248.2(3600) 30.7 (8.1) 9.7(140) 12.4(180) 18.6(270) 24.8(360) 37.2(540) 62.7(910) 93.8(1360) 125.5(1820) 187.5(2720) 251.0(3640) 35.6 (9.4) 8.3(120) 11.0(160) 16.5(240) 21.4(310) 32.4(470) 53.8(780) 81.4(1180) 108.2(1570) 162.0(2350) 215.8(3130) 46.6 (12.3) 8.3(120) 11.7(170) 15.9(230) 24.1(350) 40.0(580) 60.0(870) 80.0(1160) 120.0(1740) 160.0(2320) V-ak - ump/motor Combinations Maximum Operating ressure ar (SI) Motor KW (H) ump LM 1725 RM 1.5 (2) 2.2 (3) 3.7 (5) 5.6 (7.5) 7.5 (10) 11.2 (15) 14.9 (20) V (2.0) 72.4(1050) 108.2(1570) 179.3(2600) 266.1(3860) V (2.5) 64.1(930) 94.5(1370) 155.1(2250) 232.4(3370) V (3.0) 57.2(830) 84.8(1230) 137.9(2000) 206.8(3000) V (3.5) 51.7(750) 75.8(1100) 124.1(1800) 184.8(2680) 246.1(3570) V (4.0) 46.9(680) 68.9(1000) 113.8(1650) 168.2(2440) 223.4(3240) V (4.5) 43.4(630) 63.4(920) 103.4(1500) 153.8(2230) 204.8(2970) 305.4(4430) V (5.0) 40.0(580) 58.6(850) 96.5(1400) 142.0(2060) 188.9(2740) 281.3(4080) V (5.5) 37.9(550) 55.2(800) 89.6(1300) 132.4(1920) 175.1(2540) 261.3(3790) V (6.0) 35.2(510) 51.7(750) 83.4(1210) 123.4(1790) 163.4(2370) 244.1(3540) V (6.5) 33.1(480) 48.3(700) 77.9(1130) 115.8(1680) 153.0(2220) 228.2(3310) V (7.0) 31.0(450) 45.5(660) 73.8(1070) 108.9(1580) 144.8(2100) 215.1(3120) V (8.0) 41.4(600) 66.2(960) 97.9(1420) 129.6(1880) 193.1(2800) 255.1(3700) V (8.5) 39.3(570) 64.1(930) 93.1(1350) 123.4(1790) 182.7(2650) 242.7(3520) V (9.0) 37.2(540) 60.7(880) 88.9(1290) 117.2(1700) 174.4(2530) 231.0(3350) V (9.5) 35.9(520) 57.9(840) 84.8(1230) 112.4(1630) 166.2(2410) 220.6(3200) V (10.0) 34.5(500) 55.2(800) 81.4(1180) 106.9(1550) 159.3(2310) 206.8(3000) V (10.5) 33.1(480) 53.1(770) 77.9(1130) 102.7(1490) 152.4(2210) 202.7(2940) V (11.0) 31.7(460) 51.0(740) 75.2(1090) 98.6(1430) 146.9(2130) 194.4(2820) V (11.5) 31.0(450) 49.0(710) 72.4(1050) 95.1(1380) 141.3(2050) 186.8(2710) V (12.0) 29.6(430) 47.6(690) 69.6(1010) 91.7(1330) 135.8(1970) 180.0(2610) V (12.5) 29.0(420) 46.2(670) 66.9(970) 88.3(1280) 131.0(1900) 173.7(2520) V (13.0) 28.3(410) 44.8(650) 64.8(940) 85.5(1240) 126.9(1840) 167.5(2430) V (13.5) 26.9(390) 43.4(630) 62.7(910) 82.7(1200) 122.7(1780) 162.0(2350) V (14.0) 26.2(380) 42.1(610) 60.7(880) 80.0(1160) 118.6(1720) 157.2(2280) V (14.5) 25.5(370) 40.7(590) 59.3(860) 77.9(1130) 115.1(1670) 152.4(2210) V (15.0) 24.8(360) 39.3(570) 57.2(830) 75.2(1090) 111.7(1620) 147.5(2140) 22 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

25 echnical Information Hydraulic ower Units Series D, H, V-acks erformance Data umps Efficiency - % Flow LM GM ar 0 SI RM Volumetric Efficiency Overall Efficiency Flow Input ower at Full Flow Compensated ower ressure KW H 20.0 NOE: he efficiencies and data in the graph are good only for pumps running at 1800 RM and stroked to maximum. o calculate approximate horsepower for the other conditions, use the following formula: [ ] H = Q x (SI) N + (CHp) x ctual GM is directly proportional to drive speed and maximum volume setting. Flow loss, however, is a function of pressure only. Standard umps ower Efficiency - % Flow LM GM ar 0 SI RM Volumetric Efficiency Overall Efficiency Flow Input ower at Full Flow Compensated ower KW ressure WHERE: Q = ctual Output Flow in GM SI = ressure t ump Outlet CHp= Input Full 1800 RM (from graph read at operating pressure) N = Drive Speed in RM H ower Horsepower Limited umps RM RM Outlet Flow (GM) D C E C ressure - SI F D E F Horsepower H Input orque (In.-Lb.) Outlet Flow (GM) C D E E ressure - SI D C Horsepower H Input orque (In.-Lb.) V16 FULL SROKE MOOR KW (H) 1.5(2) 2.2(3) 3.7(5) 5.6(7.5) 7.5(10) 11.2(15) Compensator Setting ar (SI) (1600) (2200) (3000) (3000) (3000) (3000) ump Control Option H with V16 Horsepower Limiting Factory Compensator Settings V33 FULL SROKE MOOR KW (H) 5.6(7.5) 7.5(10) 11.2(15) 14.9(20) Compensator Setting ar (SI) (2200) (2700) (3000) (3000) ump Control Option H with V33 Horsepower Limiting Factory Compensator Settings arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 23

26 echnical Information Hydraulic ower Units Series D, H, V-acks erformance Data Heat Exchangers 1.5(2) ir/oil Heat Exchangers, 1 & 2 used with 1800 RM EFC Motors Horsepower Re moved y Cooler KW (H) 1.1(1.5).75(1).60(.8).45(.6).37(.5).30(.4).22(.3) (.3) (.5) 2.27 (.4) (.6) 3.03 (.8) ump Case H. E. with 56C-256C Motors 1* - Return Line H. E. (D5 ower Units Only) 1 - Return Line H. E. with 56C-184C Motors 2 - Return Line H. E. with 213C-256C Motors 1 (1) 5.68 (1.5) 7.57 (2) (3) (4) Oil Flow - LM (GM) Heat removal is based on 4.4oC (40oF) differential between transfer medium. 1* (5) (6) (8) (10) (15) (20) (25) Oil ressure Drop at 100 SSU =.34 ar (5 SI) =.69 ar (10 SI) = 1.38 ar (20 SI) Horsepower Removed y Reservoir KW (H) REMOVL RESERVOIR SIZE LIERS (GLLONS) 18.9(5) 37.9(10) 75.7(20) 113.6(30) 151.4(40).15(.2).28(.38).43(.58).51(.68).60(.81) Heat removal is based on static ambient air at 29.4oC (85oF) and max. oil temperature of 57.2oC (135oF). 24 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

27 Notes Hydraulic ower Units arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 25

28 Introduction Hydraulic ower Units V-ak Low rofile Series RESSURE OR REURN OR FILLER/REHER SINGLE REMOV- LE OLE UM COMENSOR CONROL OIL LEVEL GUGE WIH HERMOM- EER 406mm (16") CLENOU COVER SE-12 RESERVOIR DRIN UM CSE REFILL OR GLYCERINE FILLED RESSURE GUGE WIH SHU-OFF VLVE SFEY RELIEF VLVE Standard Features Vertical Design Submerged ump recision ump Mounting dapters Suction Strainer Glycerine Filled ressure Gage with Shut Off Oil Level Gage with hermometer Remote Compensator and Safety Relief reather and Fill Cap 1800 RM Motor Drain lug Clean Out Cover Single Removable opplate Extra SE-20 Return ort ll Hydraulic Connections SE Straight hread enefits Saves Floor Space ositive ump Inlet Longer ump Life rotects ump from Contamination Improved Diagnostics Helps to Maintain rouble-free erformance rotects gainst System Shock Easy to Fill ank, Control Ingression of irborne Contaminants More Flow at Less Cost llows Drainage of Fluid Easy ccess to Inside of Reservoir Easy Servicability of Internal Components llows Flexibility for Customer Return lumbing No Leaks Quick Reference Data Chart Low rofile ank Size ump Flow Electrical Motors Maximum V-ak Liters (Gallon) LM 1800 RM KW (H) R (SI) V (80) (36.1) (7 1/2-40) 207 (3000) 26 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

29 Introduction Hydraulic ower Units V-ak Low rofile Series erformance Data Standard Features Vertical Design Submerged ump recision ump Mounting dapters Suction Strainer Glycerine Filled ressure Gage with Shut Off Oil Level Gage with hermometer Relief Valve External ump Compensator Control reather and Fill Cap 1800 RM EFC Motor Cleanout Cover ressure and Return ort lock with Safety Relief Remote ump Compensator Control Valve Options D05 (D02) Single Station Manifold with Safety Relief D05 (D02), D08 (D06) Multi-Station Manifold with Safety Relief ressure & Return Filters (10 Micron) Variety of Manapak Sandwich Valves Heat Exchangers (ir/oil) Combination emp/float Switch - emp Fixed Single ressure Remote Compensator Single ressure Remote Compensator with Low ressure Standby i-ressure Remote Compensator i-ressure Remote Compensator with Low ressure Standby Load Sensing (Flow Control)-Consult Factory Horsepower Limiting-Consult Factory Specifications arker V-ak Hydraulic ower Units are vertical design, 303 liter (80 gallon) reservoirs utilizing arker Variable Volume iston umps. Warranty he hydraulic components on these arker ower Units are warranteed for one year. his warranty may be extended to three years by using and properly maintaining arker filters. Schematic Symbol (asic Unit) SE -12 O OION MNIFOLD M SULY OR SE-16 REURN OR SE-20 OMI OION COM CONROL SE-20 SRE REURN V-K SIC UNI NO OIONS OR CCESSORIES OMI OION UM COMENSOR O OION MNIFOLD Installation Data: See page 19 of this catalog or arker Installation/ Maintenance Manual for specific recommendations pertaining to start-up, system cleanliness, fluids, temperatures and other important factors relative to proper installation and use of these power units. ump ank Size ump Flow Electrical Motors Maximum Model Liters (Gallon) LM 1800 RM KW (H) R (SI) V (80) ( ) (7 1 /2-40) 207 (3000) arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 27

30 V-ak Low rofile Ordering Information Hydraulic ower Units V-ak Low rofile Series V8 OR Reduced Flow W Reservoir Size 80 Gallons (302.8 Liters) ressure Control ump Control ump Flow No Motor (See Note) ** Electric Motor Manifold Omit J C CJ D DJ F Omit * ressure Control Single ressure Remote Compensator Single ressure Remote Compensator with Low ressure Standby Single ressure Remote Compensator with Low ressure Standby, 24 VDC i-ressure Remote Compensator i-ressure Remote Compensator, 24VDC i-ressure Remote Compensator with Low ressure Standby i-ressure Remote Compensator with Low ressure Standby, 24VDC rovision for Customer Supplied Remote Control Relief Valve Std. Remote Compensator Load Sense Flow Control NOE: 1. Manifolds are mounted vertically. ottom station is number M5-3 and 5 station available. M8-2 station available. ump Control *Unless otherwise specified, a SE-6 37 flared port will be supplied for customer connection. **Consult factory for horsepower and hi-lo pump control options. Lead time is four weeks. ump Flow RM ump Used and Description GM (59 LM) V33 - Std. Remote Compensator GM (87 LM) V48 - Std. Remote Compensator GM (137 LM) V76 - Std. Remote Compensator * Specify in GM Destroked (Reduced) Flow *Unless otherwise specified, units are shipped at max. flow rate (GM) at 1800 RM. When reduced flow setting is required, Reduced flows from 22.5 to 8.0 GM (85.2 to 30.3 LM), specify in 0.5 GM increments. Reduced flows from 35.0 to 24.0 GM (132.5 to 90.8 LM), specify in 1.0 GM (3.8 LM) increments. Example: V*9.5**-- V*31**-- = V33 ump destroked to 9.5 GM (36.0 LM) = V76 Load Sense ump destroked to 31.0 GM (177.3 LM) Electric Motor Description H (kw) - RM - Frame - ype M 7.5 (5.6) C - EFC N 10 (7.5) C - EFC 15 (11.2) C - EFC S 20 (14.9) C - EFC Q 25 (18.6) C - EFC R 30 (22.4) EFC V 40 (29.8) EFC Electric motors are 230/460V, 60 Hz 3H. Consult factory for other motor speeds (RM) and voltages. **Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent to frame size of motor to be used. Example: V815WM*** = L (80 gal) reservoir, std V33 unit to accept a 7.5 H (5.6KW)/213C C-face frame motor. O S5 orting lock/subplate or Manifold ype ressure and Return ort lock with Safety Relief Valve D05 Single Station Subplate with Safety Relief Valve D05 Multistation arallel Circuit Manifold with Safety M5* (2) Relief and ump Compensator Valves M82 (3) D08 wo arallel Circuit Manifold with Safety Relief and ump Compensator Valves Supply/Return ort or ctuator ort Size ort SE-16 ort SE-20 & orts SE-10 Str. hr'd & orts SE-8 Str. hr'd & orts SE-16 Str. hr'd Other None None None Y ort SE-8 Str. hr'd *When ordering Multi-Station Manifolds, the number of stations must be specified. If valves are to be mounted, specify the valves and sequence, if the model code exceeds 25 digits, call factory. Example: V815QM53C1 Example: V815QM5511CC 3 Station D05 Manifold 5-Station D05 Manifold Station #1: Station #1: 1 Station #2: C Station #3: 1 Station #2: 1 Station #3: C Station #4: Station #5: C = Omit if not required 28 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

31 HY CD/US V-ak Low rofile Ordering Information Hydraulic ower Units V-ak Low rofile Series Directional Control Valve *Manapak Control Valves Options and ccessories Directional Control Valve Valve Model Number NF Mounting ad Nominal Flow GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) Description Double (Spr. Ctr) Double (Spr. Ctr) Circuit Symbol 1 3 Manapak Control Valves Function Flow Control ilot Operator Check Valve Model Number NF Mounting ad FM2DDKN D03 7 (26.5) COM2DDN D03 7 (26.5) *Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Nominal Flow GM (LM) Circuit Symbol * * Options and ccessories Function Model Number echnical Data Continuous ump Case Cooling Continuous ump Case Cooling C* Filter/Cooling Loop RM RM CC H 40CN205Q H ressure Filter 30210QM250NN1 ir/oil: Max. Oil Flow 4.5 GM (17 LM), 0.8 H (0.6 kw) Heat Rejection ir/oil: Max. Oil Flow 4.5 GM (17 LM) 1.5 H (1.1 kw) Heat Rejection ir Oil w/1 H Motor: Oil Flow 4.5 GM (17 LM), 4.5 H (3.3 kw) Heat Rejection 10 Micron Microglass II Dual Element, Mechanical Indicator K Check Valve ump Outlet D1-2 5 SI (0.3 bar) Cracking ressure L ypass Check C2020S65 65 SI (4.6 bar) Cracking ressure N Return Filter 40CN210Q 10 Micron Microglass II Dual Element, Mechanical Indicator** (8 SID) QS Return Filter 80CN110QE2GS Micron Microglass II Single Element Electrical Indicator (25 SI) R1 R2 Combination Float/emp. Switch N.O. Float Up Combination Float/emp. Switch N.C. Float Up V Return Filter 5010CN25OOH Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.O.) Fixed emp at 65 C (149 F) Low Level and/or 65 C (149 F) (N.C.) 10 Micron Spin-On Single Element Mechanical Indicator *Heat rejection data is based on 100 SSU oil leaving the cooler 22 C (72 F) higher than the ambient air temperature used for cooling. Option available from 7.5 H (0.6 KW) thru 25 H (18.5 KW). Option C not available with option or. **ased on max. 36 GM (136 LM) w/150 SUS oil. = Omit if not required arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 29

32 SFEY RELIEF DO NO DJUS HY CD/US Installation Information Hydraulic ower Units V-ak Low rofile Series Dimensions asic V-ak Low rofile Shown with Omit Option Manifold Inch equivalents for millimeters dimensions are shown in (**) Motor Motor Description KW(H)-RM-Frame-ype Dimension "" " M 5.6(7.5) C-EFC 451 (16.6) N/ (10.75) "" N 7.5(10) C-EFC 451 (17.2) N/ FILER REHER (SNDRD) (9.12) S 11.2(15) C-EFC 14.9(20) C-EFC 451 (20.0) 597 (23.5) 48 (1.88) 48 (1.88) SE-20 SRE REURN OR UM RIME UM COMENSOR CONROL (32.25) Q R V 18.6(25) C-EFC 22.4(30) C-EFC 29.8(40) C-EFC 579 (22.8) 620 (24.4) 627 (24.7) 51 (2.0) 51 (2.0) 144 (5.69) 72.9 (2.87) (36.0) SFEY RELIEF VLVE MININ 31 R (450 SI) OVE UM COMENSOR CONROL SEING (33.0) (29.0) SE-20 SRE REURN OR (VILLE WIHOU REURN FILER ONLY) SULY OR SE-16 OR REURN OR SE-20 OR "O" OION MNIFOLD REMOE UM COMENSOR CONROL DJUSMEN * Reference dimension consult factory if critical to application. OLE LIFING EYE Y.-3 LCS. CLEN-OU COVER UM CSE FILL OR RESSURE GUGE WIH SHU-OFF VLVE ""* V-K FULL MRK 432 (17.0) Ø15.9 (.625) Y. -4 LCS. 725 (28.56) SE-12 NK DRIN (37.5) (39.0) 63.5 (2.50) (28.0) (31.36) (34.59) 68.6 (2.70) 30 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

33 echnical Information Hydraulic ower Units V-ak Low rofile Series V-ak Low rofile S5 Manifold Options Inch equivalents for millimeters dimensions are shown in (**) S5 SULE OION FOR USE WIH D3W VLVE (NF D05) 71.4 (2.81) 38.1 (1.50) -D03 -D05 -D03 -D05 SULY OR SE-12 REURN OR SE-12 REURN OR SE-12 UM SULY REURN OR SE (1.06) D05 MNG SURFCE "" OR SE-10 "" OR SE (2.13) arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 31

34 HY CD/US echnical Information Hydraulic ower Units V-ak Low rofile Series ""&""ORS -16 SE (2 SIONS) V-ak Low rofile M53/M55 & M82 Manifold Options Inch equivalents for millimeters dimensions are shown in (**) "M53/M55 Option" REURN OR SE-12 "G" SE-6 G D05 MNG SURFCE ""&""ORS SE-8 3 ND 5 SIONS 1.25 M53 ND M55 UM SULY 3 ND 5 SION MNIFOLD OIONS FOR USE WIH NF D05 VLVES 83.0 (3.25) ER SION (6.5) 3 ND 5 SION VIL. G 83.0 (3.25) 17.5 (0.69) 54.0 (2.12) 40.0 (1.56) "M82 Option" REURN OR SE-16 Y "Y" SE-8 G "G" -6 SE M (1.81) 2 SION MNIFOLD OION FOR USE WIH NF D08 VLVES SE-8 "Y" OR, NO "" OR (10.50) G (5.25) Y 26.9 (1.06) 66.8 (2.63) 50.8 (2.00) 32 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

35 echnical Information Hydraulic ower Units V-ak Low rofile Series V-ak Low rofile - Compensator Options Inch equivalents for millimeters dimensions are shown in (**) "OMI" OION SINGLE RESSURE REMOE COMENSOR "" OION SINGLE RESSURE REMOE COMENSOR W/LOW RESS SNDY HIGH SI LOW SI LOW SOL SNDY UM CSE RE-FILL OR SE -6 U.VEN OR (SE-6) UM COMENSOR CONROL DJUSMEN UM CSE RE-FILL OR HIGH SOL SOLENOID IS LOW W WIH DIN CONNECOR ND MNUL OVERRIDE LOW RESS.SNDY(N.O.) ENERGIZE O UILD RESSURE UM COMENSOR CONROL DJUSMEN HI SOL LO SOL LO HI "C" OION I-RESSURE REMOE COMENSOR HIGH SI LOW SI "D" OION I-RESSURE REMOE COMENSOR W/LOW RESS SNDY HIGH SI LOW SI LOW SOL SNDY HIGH SOL HIGH SOL UM CSE RE-FILL OR SOLENOID IS LOW W WIH DIN CONNECOR ND MNUL OVERRIDE HIGH RESS.SOLENOID (N.O.) ENERGIZE FOR HIGH RESSURE UM CSE RE-FILL OR SOLENOIDS RE LOW W WIH DIN CONNECOR ND MNUL OVERRIDE HIGH RESS. SOLENOID (N.O.) ENERGIZE FOR HIGH RESSURE UM COMENSOR HIGH RESS.CONROL LOW RESS. SNDY (N.O.) ENERGIZE FOR LOW RESSURE HI SOL LO SOL HI SOL LO SOL HI HI LO LO UM COMENSOR LOW RESS.CONROL UM COMENSOR HIGH RESS. CONROL UM COMENSOR LOW RESS. CONROL "E" OION ROVISION FOR CUSOMER SULIED REMOE COMENSOR SE-6 37 FLRE UM COMENSOR RESSURE (INLE) OR UM COMENSOR NK (REURN) OR UM CSE RE-FILL OR SE-6 37 FLRE "" & "" ORS CH OINS FOR CUSOMER SULIED REMOE COMENSOR arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 33

36 echnical Information Hydraulic ower Units V-ak Low rofile Series ccessory Options V-K LOW ROFILE HE ECHNGER REURN FILER REHER RESSURE SWICH MULI-SION MNIFOLD RESSURE FILER EM. SWICH EM/LEVEL SWICH EMLE OF VRIOUS CCESSORIES INSLLED FOR REFERENCE ONLY SCHEMIC - SIC UNI WIH CCESSORIES M SEE COMENSOR OIONS OION SEE MNIFOLD OIONS H L N K M M SEE COMENSOR OIONS M SEE COMENSOR OIONS R* SE -12 C OION HYDRULIC SCHEMIC Option Option Option C Option H Cooling Loop (0.6 KW (0.8 H) Removal) Cooling Loop (1.1 KW (1.5 H) Removal) System Cooling/Filter Loop (3.4 KW (4.5 H) Removal) ressure Filter Option K ump Outlet Check Valve Option L ypass Check-Return Ht. Ex. Only Option N Return Filter - Dual Element Option R* Combination Level/emperature Switch 34 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

37 SFEY RELIEF DO NO DJUS SFEY RELIEF DO NO DJUS HY CD/US echnical Information Hydraulic ower Units V-ak Low rofile Series Dimensions - ccessories V8 reservoir with "Omit" manifold shown Inch equivalents for millimeters dimensions are shown in (**) Ordering Note: Units with V76 pumps and requiring options "", "" or "C" can only be ordered with V8 (302.8 L/80 Gal.) reservoir. HE REMOVL HE REMOVL O ION.6 KW (.80 H* ) O ION 1.1 KW (1.5 H* ) *erformance data are based on 100SSU oil leaving the cooler 4 C (40 F) higher than the ambient air temperature used for cooling. UM RIME UM RIME UM COMENSOR CONROL UM COMENSOR CONROL 85.9 (3.38) (5.11) V-K V-K Option "" Cooling Loop 5.6 KW KW (7.5 H - 25 H) ONLY Option "" Cooling Loop arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 35

38 OU IN SFEY RELIEF DO NO DJUS HY CD/US echnical Information Hydraulic ower Units V-ak Low rofile Series Dimensions - ccessories V8 reservoir with "Omit" manifold shown Inch equivalents for millimeters dimensions are shown in (**) Ordering Note: Units with V76 pumps and requiring options "", "" or "C" can only be ordered with V8 (302.8 L/80 Gal.) reservoir. HE REMOVL O ION C 3.4 KW (4.5 H* ) *erformance data are based on 100SSU oil leaving the cooler 4 C (40 F) higher than the ambient air temperature used for cooling. UM RIME UM COMENSOR CONROL (16.35) V-K Option "C" System Cooling/Filter Loop 36 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

39 SFEY RELIEF DO NO DJUS GL GM SI NK S/N HY CD/US echnical Information Hydraulic ower Units V-ak Low rofile Series Dimensions - ccessories V8 reservoir with H, N & R Options shown Inch equivalents for millimeters dimensions are shown in (**) "H" OION FILER Fluidpower Systems MODEL NUMER UM FLOW RESSURE M HYDRULIC UM/MOOR DIVISION OSEGO MICH US UM COMENSOR CONROL OION "R" COMINION EM/LEVEL SWICH (1/2 N ELEC. CONN.) "N" OION FILER 470 (18.5) arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 37

40 echnical Information Hydraulic ower Units V-ak Low rofile Series erformance Data- Maximum Working ressure **** Represents maximum operating pressure with pump/motor combination. his will be the maximum relief valve or compensator setting. **** Represents maximum operating pressure with pump/motor combination. When used on power unit products this will represent a 207 bar (3000 psi) relief valve or compensator setting. V-ak Low rofile - ump/motor Combinations Maximum Operating ressure ar (SI) UM FLOW LM 1725 RM 5.6 KW (7.5 H) 7.5 KW (10 H) 11.2 KW (15 H) 14.9 KW (20 H) 18.6 KW (25 H) 22.3 KW (30 H) 29.8 KW (40 H) V (11.0) 75.2 (1090) 98.6 (1430) (2130) (2820) (3470) V (11.5) 72.4 (1050) 95.1 (1380) (2050) (2710) (3340) V (12.0) 69.6 (1010) 91.7 (1330) (1970) 180 (2610) 222 (3220) V (12.5) 66.9 (970) 88.3 (1280) 131 (1900) (2520) (3100) V (13.0) 64.8 (940) 85.5 (1240) (1840) (2430) (3000) (3590) V (13.5) 62.7 (910) 82.7 (1200) (1780) 162 (2350) 200 (2900) (3470) V (14.0) 60.7 (880) 80 (1160) (1720) (2280) (2810) (3370) V (14.5) 59.3 (860) 77.9 (1130) (1670) (2210) (2730) (3260) V (15.0) 57.2 (830) 75.2 (1090) (1620) (2140) (2650) (3170) 38 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

41 echnical Information Hydraulic ower Units V-ak Low rofile Series erformance Data- Maximum Working ressure **** Represents maximum operating pressure with pump/motor combination. his will be the maximum relief valve or compensator setting. **** Represents maximum operating pressure with pump/motor combination. When used on power unit products this will represent a 207 bar (3000 psi) relief valve or compensator setting. V-ak Low rofile - ump/motor Combinations Maximum Operating ressure ar (SI) UM FLOW LM RM 5.6 KW (7.5 H) 7.5 KW (10 H) 11.2 KW (15 H) 14.9 KW (20 H) 18.6 KW (25 H) 22.3 KW (30 H) 29.8 KW (40 H) V (15.5) 53.8 (780) 70.3 (1020) (1500) (2000) (2470) (2950) (3920) V (16.0) 53.1 (770) 68.9 (1000) (1470) (1940) (2410) (2880) (3820) V (16.5) 57.1 (750) 67.6 (980) 98.6 (1430) (1890) 162 (2350) (2800) (3720) V (17.0) 50.3 (730) 65.5 (950) 96.5 (1400) (1840) (2290) (2730) (3620) V (17.5) 49 (710) 64.1 (930) 93.8 (1360) (1800) (2230) (2660) (3530) V (18.0) 48.3 (700) 62.8 (910) 91.7 (1330) (1760) (2180) (2600) (3450) V (18.5) 46.9 (680) 61.4 (890) 89.6 (1300) (1720) (2130) (2540) (3370) V (19.0) 46.2 (670) 60 (870) 87.6 (1270) (1270) (2080) 171 (2480) (3290) V (19.5) 45.5 (660) 58.6 (850) 86.2 (1250) (1640) 140 (2030) (2430) 222 (3220) V (20.0) 44.1 (640) 57.2 (830) 84.1 (1220) (1600) (1990) (2370) (3140) V (20.5) 43.4 (630) 56.5 (820) 82 (1190) (1570) (1950) 160 (2320) (3080) V (21.0) 42.7 (620) 55.2 (800) 80.7 (1170) (1540) (1910) (2280) (3000) V (21.5) 42.1 (610) 54.5 (790) 79.3 (1150) (1510) (1870) (2230) (2950) V (22.0) 41.4 (600) 53.8 (780) 77.9 (1130) 102 (1480) (1830) 151 (2190) (2890) V (22.5) 40.7 (590) 52.4 (760) 75.8 (1100) 100 (1450) (1800) (2140) (2840) V (23.0) 40 (580) 51.7 (750) 74.5 (1080) 97.9 (1420) (1760) (2100) (2780) arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 39

42 echnical Information Hydraulic ower Units V-ak Low rofile Series erformance Data- Maximum Working ressure **** Represents maximum operating pressure with pump/motor combination. his will be the maximum relief valve or compensator setting. **** Represents maximum operating pressure with pump/motor combination. When used on power unit products this will represent a 207 bar (3000 psi) relief valve or compensator setting. V-ak Low rofile - ump/motor Combinations Maximum Operating ressure ar (SI) UM FLOW LM 1725 RM 5.6 KW (7.5 H) 7.5 KW (10 H) 11.2 KW (15 H) 14.9 KW (20 H) 18.6 KW (25 H) 22.3 KW (30 H) 29.8 KW (40 H) V (24.0) 20.7 (300) 31.7 (460) 55.2 (800) 78.6 (1140) 100 (1450) (1760) (2425) V (25.0) 20 (290) 31 (450) 53.4 (775) 75.8 (1100) 96.5 (1400) (1700) (2325) V (26.0) 18.6 (270) 29.6 (430) 52.4 (760) 73.8 (1070) 94.5 (1370) (1650) (2260) V (27.0) 17.9 (260) 29.3 (425) 50.3 (730) 71 (1030) 91.4 (1325) (1650) (2260) V (28.0) 17.6 (255) 27.6 (400) 48.3 (700) 68.3 (990) 88.3 (1280) (1545) (2090) V (29.0) 17.2 (250) 26.9 (390) 46.5 (675) 65.5 (950) 86.9 (1260) (1515) (2040) V (30.0) (390) 45.5 (660) 63.8 (925) 83.4 (1210) (1500) (2000) V (31.0) (375) 43.8 (635) 61.4 (890) 80.7 (1170) 97.9 (1420) (1920) V (32.0) (360) 42.7 (620) 60.3 (875) 78.6 (1140) 95.1 (1380) (1865) V (33.0) (340) 41.4 (600) 57.9 (840) 75.8 (1100) 92.4 (1340) (1840) V (34.0) (325) 39.6 (575) 56.9 (825) 74.1 (1075) 90.3 (1310) (1765) V (35.0) (310) 36.5 (530) 55.2 (800) 70.7 (1025) 87.9 (1275) (1725) V (36.0) (300) 35.2 (510) 53.1 (770) 68.9 (1000) 84.8 (1230) 111 (1610) 40 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

43 echnical Information Hydraulic ower Units V-ak Low rofile Series V-ak Low rofile erformance Data Fluid Standard Hydraulics Oil C (120 F) Flow, Horsepower and Efficiency Charts Efficiency - % Flow LM GM ar 0 SI RM Volumetric Efficiency Overall Efficiency Flow Input ower at Full Flow Compensated ower ressure KW H ower Efficiency - % Flow LM GM ar 0 SI RM Flow Efficiency Full Flow ower Compensated ower ressure KW H ower Efficiency - % Flow LM GM ar 0 SI RM Flow Volumetric Efficiency Overall Efficiency Full Flow ower Compensated ower ressure KW H ower NOE: he efficiencies and data in the graph are good only for pumps running at 1800 RM and stroked to maximum. o calculate approximate horsepower for the other conditions, use the following formula: H =[ Q x (SI) ] + (CHp) 1714 ctual GM is directly proportional to drive speed and maximum volume setting. Flow loss, however, is a function of pressure only. WHERE: Q = ctual Output Flow in GM SI = ressure at ump Outlet CHp = Input Full 1800 RM (from graph read at operating pressure) NOE: Maximum input H to the pump may exceed electric motor drive capability. Select motor size (H) to exceed application requirements (H). arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US 41

44 echnical Information Hydraulic ower Units V-ak Low rofile Series V-ak Low rofile erformance Data Heat Exchangers HORSEOWER REMOVED Y COOLER KW (H) 14.9 (20) 7.5 (10) IR COOLED OIL HE ECHNGER 227 & 303 LIER (60 & 80 GLLON) OION "G" 3.7 (5) 26 (7) 30 (8) (9) (10) 57 (15) 76 (20) 95 (25) OIL FLOW-LM (GM) 114 (30) 151 (40) "G" - Return Line H. E. 30 LM LM (8 GM - 36 GM M.) erformance data is based on 100 SSU oil leaving the cooler 4.4 C (40 F) higher than the ambient air temperature used for cooling. 189 (50) OIL RESSURE DRO 100 SSU =.34 R (5 SI) =.69 R (10 SI) = 1.0 R (15 SI) = 1.4 R (20 SI) KW (H) REMOVL RESERVOIR SIZE LIERS (GLLONS) 303 (80).89 (1.2) Heat removal is based on static ambient air of 29 C (85 F) and max. oil temperature of 57 C (135 F). 42 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US

45 dditional Installation Information Hydraulic ower Units Series D, H, V-acks Operating Notes Jog the electric motor once and verify that the electric motor is rotating in the same direction as the arrow on the electric motor housing. If direction is incorrect, reverse two of the three leads on a 3-phase electric motor. D & H-ak power units are tested and relief valve is set at maximum pressure of the pump/motor combination. V-ak power units are tested and pressure control valves are factory preset. If adjustments are needed, follow the procedure below: egin adjusting relief valve and pump compensator control valve to increase pressure gradually. (NOE: lways set relief valve 250 SI higher than pump compensator pressure control valve or severe overheating will occur.) If pump fails to prime, vent pump discharge to atmosphere to establish fluid flow. Reservoir temperature should not exceed 66 C (150 F). System reliability and component service life will be reduced when system is operated at higher temperature. Clean fluid = improved system reliability and longer component service life, change filter elements whenever filter indicators indicate a dirty element condition. arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US It is recommended that every 4,000 operating hours or once a year, whichever occurs first, the filler/ breather cap and suction strainer should be replaced. Fluid Recommendations remium quality hydraulic oil with a viscosity range between SSU (30-50 cst.) at 100 F (38 C). Normal operating viscosity range between SSU ( cst.). Maximum start-up viscosity is 4000 SSU (1000 cst.). NOE: Consult arker when exceeding 160 F (71 C) operation. Oil should have maximum anti-wear properties, rust and oxidation treatment. Filtration For maximum pump and system component life, the system should be protected from contamination at a level not to exceed 125 particles greater than 10 microns per milliliter of fluid. (SE Class 4 / ISO 16/13.) Due to the nature of variable displacement pumps, variations in pump inlet conditions, fluid acceleration losses, system aeration, and duty cycle must be carefully considered before specifying suction line filtration. Contact your arker representative for assistance. NOE: For additional information refer to latest edition of ulletin No. HY xxx.. 43

46 dditional echnical Information Hydraulic ower Units ump Mounting dapters he totally enclosed pump mounting bracket offers precision shaft alignment and safety from the rotating shafts and coupling. he bracket is designed to mount on the motor face with the motor coupling half secure to the shaft. hen the pump, with its coupling half secure on the pump shaft, is mounted and the coupling halves are engaged. his will require proper spacing of the coupling prior to installation and a coupling with an outside diameter less than dimension. If the coupling selected cannot be assembled this way, both coupling halves must be installed on the motor shaft. Next, mount the adapter on the motor. hen the pump can be mounted and the coupling secured to the pump by using the access slot to tighten the pump shaft coupling set screw. Dimensions* ump Mounting dapter SYLE 1 DER (SEE CHR FOR MOUNING ORIENION) CCESS SLO M DI HRU EQULLY SCED ON C1 DI..C. (4 LCES) 45 CCESS SLO SYLE 2 DER (VERICL MOUN ONLY) M DI HRU EQULLY SCED ON C2 DI..C. (4 LCES) 45 DI. D DI. DI. DI. G G DI. D DI. DI. DI. G G FCE O FCE FCE O FCE (56C FRME) H HRED 2 LCES FCE O FCE M DI HRU EQULLY SCED ON C1 DI..C. (4 LCES) H HRED 2 LCES Model ump Motor C1 C2 D Face to Vertical Horizontal G H M Number Mounting Mounting Face Mounting Mounting Style Weight SE 56C N/ / YES YES 1 3 lb SE 182C/256C N/ / YES YES 1 4 lb SE 56C N/ / YES YES 1 4 lb SE 182C/256C N/ / YES YES 1 4 lb SE 182C/256C N/ / YES YES 1 5 lb SE 182C/256C / YES NO 2 7 lb SE 182C/256C / YES NO 2 8 lb SE 182C/256C N/ / NO YES 1 7 lb SE C 182C/256C N/ / NO YES 1 20 lb. * ll dimensions are in inches. NOE: It is the responsibility of the user to check the listed dimensions to ensure suitability of mounting adapter with pump/coupling/motor combination. 44 arker Hannifin Corporation Hydraulic ump Division Marysville, Ohio US