Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
|
|
- Beverley Chase
- 5 years ago
- Views:
Transcription
1 Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4 80 lpm 315 ar (25 ar on ) 3/4 S-, 1/2 S-,, M5/5S3/18L/G4-6 ylinder 5 M5/6S3/18L/G4-6 ylinder 6 Relief Valve Standard ar Range ower eyong lug not included. See Options for order details. h
2 Monoblock Valves M5 Options art Number YLM53002 YLM53003 YLM54061 YLM54091 YLM54080 YLM V YLM V YLM5OG4 YLM54803 FR-2 YLM55002 YLM55003 YLMLE1M YLMLE3M Description Motor Spool Single cting Spool on ort Detent Kit, No Spring to entre (Variations vailable) Detent Kit, Spring to entre (Variations vailable) nuematic Spool ositioner Electro-nuematic Spool ositioner, 12VD Electro-nuematic Spool ositioner, 24VD ower eyong lug Microswitch Kit, Normally Open (Variations vailable) Remote Joystick - 2 Spool Operation Joystick - 2 Spool Operation onnection Kit for Joystick 1m Joystick able 3m Joystick able Model M5/1S M5/2S M5/3S M5/4S M5/5S M5/6S X Y x ø Y X h
3 M-5 hapters Monoblock Directional ontrol Valves Working condition.5 Ordering code.6 Dimensions.9 erformance data.10 Inlet relief options.11 Spool options.12 side options.18 side spool positioners.21 Other options.27 Outlet options.31 1
4 For Mobile nd Industrial Hydraulic pplications. M-2 ONLY ONE SEION VILLE Nominal flow rate 45 l/min 12 US gpm Operating pressure (maximum) 250 bar 3600 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-3 VILLE SEIONS FROM 1 O 7 Nominal flow rate 45 l/min 12 US gpm Operating pressure (maximum) 315 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-4 VILLE SEIONS FROM 1 O 6 Nominal flow rate 60 l/min 16 US gpm Operating pressure (maximum) 315 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi M-5 VILLE SEIONS FROM 1 O 6 Nominal flow rate 80 l/min 21 US gpm Operating pressure (maximum) 315 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi 2
5 MONOLOK DIREIONL ONROL VLVES M-2 / M-3 / M-4 / M-5 / MS-5 SEIONL DIREIONL ONROL VLVES SN-3 / SN-4 / SN-6 MS-5 VILLE SEIONS FROM 1 O 6 With Independent load check valve in each section, and optional port relief. Nominal flow rate 80 l/min 21 US gpm Operating pressure (maximum) 315 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-3 VILLE SEIONS FROM 1 O 12 Nominal flow rate 50 l/min 13 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-4 VILLE SEIONS FROM 1 O 12 Nominal flow rate 80 l/min 21 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi SN-6 VILLE SEIONS FROM 1 O 12 Nominal flow rate 140 l/min 37 US gpm Operating pressure parallel or tandem circuit 315 bar 4600 psi (maximum) series circuit 210 bar 3050 psi ack pressure (maximum) on outlet port 25 bar 360 psi 3
6 Innovative Designs rofessional Quality ustomer Satisfaction! VILLE SEIONS FROM 1 O 6 M-5 Monoblock Directional ontrol Valves 4
7 M-5 Monoblock Directional ontrol Valves M-5 Specifications Nominal flow rate 80 l/min 21 US gpm Operating pressure (maximum) 315 bar 4600 psi ack pressure (maximum) on outlet port 25 bar 360 psi Fluid temperature range with NR (UN-N) seals from - 20 to 80 from - 4 to 176 F with FM (VION) seal from - 20 to 100 from - 4 to 212 F operating range from 15 to 75 mm 2 /s from 15 to 75 cst Viscosity min 12 mm 2 /s 12 cst max. 400 mm 2 /s 400 cst mbient temperature range from - 40 to 60 from - 40 to 140 F ll specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. 5
8 M-5 Monoblock Directional ontrol Valves M-5 / 2S - 3 / 1 8 L / G-4-6 / M ody kits Inlet relief (optional) Spool options "" side spool positioners (optional) "" side (optional) 1: ody kits WIHOU SERVIE OR VLVES RERRNGEMEN (INLUDE ODY, SELS, RINGS ND LOD HEK VLVE.) YE DESRIION 1 - S 1 section 2 - S 2 sections 3 - S 3 sections 4 - S 4 sections 5 - S 5 sections 6 - S 6 sections 2: Inlet Relief (optional) YE ODE DESRIION GE XG YLX21000 ilot operated pressure relief valve Range 25 to 315 bar/ 360 to 4600 psi, standard setting 125 bar/ 1800 psi. 11 G-2 YLM52002 Direct pressure relief valve Range 80 to 160 bar/ 1150 to 2300 psi, standard setting 125 bar/ 1800 psi. 11 G-3 YLM52003 Direct pressure relief valve Range 125 to 250 bar/ 1800 to 3600 psi, standard setting 175 bar/ 2500 psi. 11 G-4 YLM52004 Direct pressure relief valve Range 200 to 315 bar/ 2900 to 4600 psi, standard setting 220 bar/ 3200 psi. 11 SV YLM52100 Relief valve blanking plug. 11 6
9 ?????????? M-5 Monoblock Directional ontrol Valves 3: Spool Options YE ODE DESRIION GE??????? 1 YLM53001 Double acting, 3 positions, with, closed in neutral position YLM53002 Double acting, 3 positions, with, open to ank in neutral position YLM53003 Single acting on closed in neutral position, 3 positions, plugged YLM53004 Single acting on closed in neutral position, 3 positions, plugged YLM53005 Double acting, 3 positions, with open to ank in neutral position YLM53006 Double acting, 3 positions, with open to ank in neutral position YLM53009 Double acting, 3 positions, with,,, closed in neutral position (losed center) YLM53010 Double acting, 3 positions, with, open to ank and, closed in neutral position (losed YLM53052 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pulling the lever. 16 5Y YLM53051 Double acting, 4 positions, floating circuit in 4th position with, open to ank by pushing the lever. 17 4: Side Spool ositioners YE ODE DESRIION GE 6-1 YLM54061 Detent in pos , without spring centered YLM positions, detent in pos. 0-2, without spring centered YLM positions, detent in pos. 1-0, without spring centered. 21 8D2 YLM54082 With spring return to neutral position and pin with M8 male thread for dual control. 21 8E3 YLM54300 ON/OFF Electro-neumatic actuator YLM54080 ON/OFF neumatic actuator. 22 8MG1 (NO) YLM54801 Microswitch kit operated in pos. 1 (Normally Open). 25 8MG2 (NO) YLM54802 Microswitch kit operated in pos. 2 (Normally Open). 25 8MG3 (NO) YLM54803 Microswitch kit operated in pos. 1&2 (Normally Open). 25 MG (NO) YLM54804 Microswitch with NO terminal. 25 8MG1 (N) YLM Microswitch kit operated in pos. 1 (Normally losed). 25 8MG2 (N) YLM Microswitch kit operated in pos. 2 (Normally losed). 25 8MG3 (N) YLM Microswitch kit operated in pos. 1&2 (Normally losed). 25 MG (N) YLM Microswitch with N terminal YLM54008 With spring return to neutral position YLM positions, with spring centered from pos YLM positions, with spring centered from pos YLM54091 Detent in pos. 1, 2 with spring centered YLM54092 Detent in pos. 2 with spring centered YLM54093 Detent in pos. 1 with spring centered. 26 8ED3+RV-KE1R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 23 8ED3+RV-KE2R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 23 8ED3+RV-KE3R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 23 8ED3+RV-KE4R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 23 8ED3+RV-KE5R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 23 8ED3+RV-KE6R3 YLM S: ON/OFF Electro-Hydraulic control kit with pilot and drain line+backpressure valve (12/24 VD). 23 7
10 M-5 Monoblock Directional ontrol Valves M-5 / 2S - 3 / 1 8 L / G-4-6 / M ody kits Inlet relief (optional) Spool options "" side spool positioners (optional) "" side (optional) 4: Side Spool ositioners YE ODE DESRIION GE 8ER3+KE1S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 24 8ER3+KE2S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 24 8ER3+KE3S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 24 8ER3+KE4S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 24 8ER3+KE5S0 YLM S:ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 24 8ER3+KE6S0 YLM S: ON/OFF Electro-hydraulic control kit with collector kit for external pilot and drain. 24 5: Side (optional) YE ODE DESRIION GE L YLM55000 Standard lever box. 18 SL YLM55001 Without lever box, with dust-proof plate. 18 L YLM55002 Joystick lever for 2 section operation. 19 Q YLM55003 Flexible cable connection. 20 8
11 M-5 Dimensions Monoblock Directional ontrol Valves x ø Y X Standard threads orts Inlet and Outlet and carry-over S G1/2 G1/2 G3/4 UN-UNF 1" 1/16-12 UN (SE 12) 7/8-14 UNF (SE 10) 1" 1/16-12 UN (SE 12) MERI M18x1.5 M18x1.5 M22x1.5 Standard dimensions G-1/2 : G4 G-3/8 : G3 G-3/4 : G6 SE 8: E8 SE 10: E10 SE 12: E12 SE 16: E16 YE X Y mm in mm in M5 /1S M5 /2S M5 /3S M5 /4S M5 /5S M5 /6S
12 M-5 erformance curve chart Monoblock Directional ontrol Valves t o r e s s u r e d r o p 40 ( b a r ) sections 4 sections 2 sections 540 (psi) Flow 0 90 (l/min) to () r e s s u r e d r o p 40 ( b a r ) (6) 1(1) 540 (psi) Flow 0 90 (l/min) () to r e s s u r e d r o p 40 ( b a r ) (1) 6(6) 540 ( p s i ) F l o w ( l / m i n ) 10
13 M-5 Inlet Relief (Optional) Monoblock Directional ontrol Valves ype G Direct pressure relief valve: ø Max ype XG ilot operated pressure relief valve: ø Max ype SV Relief valve blanking plug: ø
14 M-5 Spool Options Monoblock Directional ontrol Valves YE 1 closed & & & closed open closed YE 2 closed & closed open closed 12
15 M-5 Spool Options Monoblock Directional ontrol Valves YE 3 & closed "" port plugged & & closed open "" port plugged closed open "" port plugged YE 4 closed open "" port plugged & & closed open "" port plugged & closed "" port plugged 13
16 M-5 Spool Options Monoblock Directional ontrol Valves YE 5 closed & closed open closed YE 6 closed & closed open closed 14
17 15 M-5 Spool Options Monoblock Directional ontrol Valves YE 9 closed & & & closed closed closed YE 10 closed & & closed closed
18 M-5 Spool Options Monoblock Directional ontrol Valves YE 5DY NOE: WIH SEIL ODY ND SEIL OSIIONER 3 closed & & & closed 3 open 3 closed & closed 3 open 16
19 M-5 Spool Options Monoblock Directional ontrol Valves YE 5Y NOE: WIH SEIL ODY ND SEIL OSIIONER & closed 3 open 3 closed & & & closed open 3 3 closed 17
20 M-5 Side Monoblock Directional ontrol Valves ype L ype L : SNDR LEVER KI ype R ype R : SNDR LEVER KI (ROED 180 DEGREE) ype SL ø ype SL : WIH DUS-ROOF LE
21 M-5 Side Monoblock Directional ontrol Valves L: Joystick contorl ype L L1 L ype L L3 L
22 M-5 Side Monoblock Directional ontrol Valves Note : ONNEION KI NO INLUDE LE able Q Kits ype Q M6x1.0 M16x1.5 Q Kit:
23 M-5 Side Monoblock Directional ontrol Valves ype Kit: DEEN IN OS , WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. 0-2, WIHOU SRING ENERED Kit: 2 OSIIONS, DEEN IN OS. 1-0, WIHOU SRING ENERED ype 8D2 8D2 Kit: M WIH SRING REURN O NEURL OSIION ND IN WIH M8 MLE HRED FOR DUL ONROL
24 M-5 Side Monoblock Directional ontrol Valves ype 8 V1 & V2: N 1/ ON/OFF NEUMI KI V1 V V1 V2 Operating feature : ILO RESSURE (MIN.): 6 R / 87 SI ILO RESSURE (MX.): 12 R / 174 SI ype 8E V1 V ø V1 V Solenoid operating features : NOMINL VOLGE: 24VD NOMINL VOLGE OLERNE: 10% OWER RING: 5W 22
25 M-5 Side Monoblock Directional ontrol Valves ype 8ED VR VR VRE VRE V L Operating features : ILO RESSURE: MIN. 10 R / 145 SI MX. 50 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 360SI oil features : NOMINL VOLGE OLERNE: 10% ELERI OWER: 21 W SNDRD VOLGE: 12 VD / 24 VD 23
26 M-5 Side Monoblock Directional ontrol Valves ype 8ER V L V L V L Operating features : ILO RESSURE: MIN. 10 R / 145 SI MX. 50 R / 725 SI MX. KRESSURE ON DRIN L: 25 R / 360SI oil features : NOMINL VOLGE OLERNE: 10% ELERI OWER: 21 W SNDRD VOLGE: 12 VD / 24 VD 24
27 M-5 Side Monoblock Directional ontrol Valves ype 8MG 8MG1 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 8MG2 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS MG3 Kit: MIROSWIH WIH MLE/FEMLE ONNEOR, OERED IN OS. 1 ND OS With NO contact (female connector with male end) MIROSWIH Operating features : MEHNIL LIE: 5X10 5 OERIONS ELERIL LIE (RESISIVE LOD): 10 5 OERIONS - 7 / 13.5 VD 5x10 4 OERIONS - 10 / 12 VD 5x10 4 OERIONS - 3 / 28 VD With N contact (male connector with female end)
28 M-5 Side Monoblock Directional ontrol Valves ype 8 8 Kit: SRING REURN O NEURL OSIION Kit: SRING REURN O NEURL OSIION. (2 OSIIONS) Kit: SRING REURN O NEURL OSIION. (2 OSIIONS) ype Kit: DEEN IN OS. 1, 2 WIH SRING ENERED Kit: DEEN IN OS. 2 WIH SRING ENERED 9-3 Kit: DEEN IN OS. 1 WIH SRING ENERED 26
29 M-5 Service and auxiliary valves Monoblock Directional ontrol Valves nti-shock valves (ROSS REURN YE, SULIED WIH MOUNING LOK) Note : ll service and auxiliary valves need special body ype 1 Kit: YLM56001, lock with valve on port Kit: YLM56002, lock with valve on port x ø Kit: YLM56003, lock with valve on port and
30 M-5 Service and auxiliary valves Monoblock Directional ontrol Valves ilot check valves (WIH RE-OENING, SULLIED WIH MOUNING LOK) Note : ll service and auxiliary valves need special body ype S ilot check valves (With re-opening, supplied with mounting block) S1 Kit: YLM57001, lock with valve on port S2 Kit: YLM57002, lock with valve on port xø S3 Kit: YLM57003, lock with valve on port and 28
31 M-5 ccessories Monoblock Directional ontrol Valves ype JH-2 Specifications: his data sheet shows technical spec. with mineral oil of 46 mm 2 /s (cst) voscosity at 40 (104 F) Flow : 5 ~ 20 LM Feeding pressure : 30 ~ 100 bar Max. backpressure : 3 bar Internal leakage at 30 bar : 10 ~ 18 cm 3 /min Fluid : mineral oil Fluid temperature : - 10 ~ 80 mbient temperature : - 40 ~ HYDRULI SHEME:
32 130 M-5 ccessories Monoblock Directional ontrol Valves ype H-1 Specifications: his data sheet shows technical spec. with mineral oil of 46 mm 2 /s (cst) voscosity at 40 (104 F) Flow : 5 ~ 20 LM Feeding pressure : 30 ~ 100 bar Max. backpressure : 3 bar Internal leakage at 30 bar : 10 ~ 18 cm 3 /min Fluid : mineral oil Fluid temperature : - 10 ~ 80 mbient temperature : - 40 ~ HYDRULI SHEME:
33 M-5 Outlet Monoblock Directional ontrol Valves M8 ower eyond onversion plug (losed center plug) M
34 32 Memo
45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationMB-2 Chapters Monoblock Directional Control Valves
M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial
More informationMB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
More informationCTSN-4 Content Sectional Directional Control Valves
SN-4 ontent Specifications.5 Ordering code.7 Dimensions.12 erformance data.13 Inlet relief options.14 Spool options.15 side options.20 side spool positioners.23 ort relief.29 Outlet options.30 1 For Mobile
More informationHydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
More informationp max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationHV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
More informationMonoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationTESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES
ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted
More informationDIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures
HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed center hydraulic systems.. H Fitted with
More informationSDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data
More informationUmschaltventile Magnet
Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
More informationTESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE rchivierung: 4/6 SD5 Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1
More informationMONOBLOCK DIRECTIONAL CONTROL VALVE
MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 6 sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve
More informationSECTIONAL DIRECTIONAL CONTROL VALVES
SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,
More informationX-Series. Load-Sensing Sectional Control Block. Table of contents
X-Series Load-Sensing Sectional ontrol lock -6 Nominal pressure: 5076 psi (350 bar) Nominal flow rate l ump port: 66 gpm (250 l/min) l Working ports: 42 gpm (160 l/min) with compensator and load holding
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationDFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationCONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,
More informationSECTION 1 Mobile Directional Control Valves
SECION Mobile Directional Control Valves Make Model age Hydrocontrol Galtech ucher ucher Galtech Galtech Galtech Galtech Galtech Galtech ucher Cross Cross rince ucher ucher ucher ucher Hydrocontrol Hydrocontrol
More informationCONTROL VALVES
- 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More information-Technical data... 2/14 -Circuit mode... 2/14 -Dimensions RP /14
Auxiliary valves Document: SCV-1-June 2013 Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 2/14 -Circuit mode... 2/14 -Dimensions... 3/14 -Dimensions... 4/14 -Lever mechanism...
More informationDirectional Control Valve HDS21
Directional Control Valve Reference: 2--991232-N-2 Issue: 3.218 1/64 Contents age 1 General information... 4 1.1 Introduction... 4 1.2 Directional valve installation... 1.3 Fittings... 1.4 Hydraulic fluid...
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationAuxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationType : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil
ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that
More informationMONO-BLOCK DIRECTIONAL VALVE HDM 18 SERIES
Material specification: Standard features: Optional features available: Symbols: A/B H..C.O. RV 1 1 Weight CROSS HYDRAULICS Y LD YELLOW CAALOGUE age 2.45 HDM18/1 1 H..C.O. A B 1 RV HDM18/2/3/4 B B A A
More information5.2 to 79 gpm 3000, 3600, 5000 psi
Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview he modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates
More informationmechanical control valve
DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6
More informationSDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
More informationNV452 Monoblock directional control valve
NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever
More informationV050 SERIES DIRECTIONAL CONTROL VALVE
V5 SERIES DIRECTIONAL CONTROL VALVE TAKE CONTROL Take control with Muncie Power Products V5 directional control valve. The V5 is constructed with high-grade iron castings and nickel-plated spools for use
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona
More informationORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
More informationMonobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 6 Monobloc directional control valves Contents 6.1 General specifications 66 6.2 Dimensional data 67 6.3 Performances curves
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationCX3 SOLENOID OPERATING PROPORTIONAL CONTROL BANKABLE VALVES FEATURES ORDERING CODE HYDRAULIC SYMBOLS
CX3 SOLENOID OERING ROORIONL CONROL NKLE VLVES CX3 series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. he individual
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK VALVE INDEX MONOBLOCK DIRECTIONAL CONTROL VALVES For mobile and industrial hydraulic applications. MA6 (6 GPM) General Specifications 4 Dimensions 5 Performance Chart 6 Ordering Code 7 MAV12
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationDirectional Control Valve HDS34
Directional Control Valve Load Sensing Reference: 2 991227 E Issue: 7.9 1/54 Contents age 1 General information................................................................ 4 1.1 Introductions..................................................................
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationHyva Valves Introduction
Introduction Hyva tipping valves Hyva offers a complete range of tipping valves to be used for different cylinder volumes. The T 0 & 00 valve can be used for flows up to 0 litre per minute. The pressure
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationIFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
More informationHidro Pnevmo Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: / Fax : +359/
Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: +359 431/ 62 228 Fax : +359/ 62 019 DIRECTIONL CONTROL VLVES RS04.. /.. BV 99 /... RS06 V.. /.. RHB06-.. /..... RS06 V.. /.. 4/2 RH06/20 RM 06 /.. 4/2 RH06/20.
More information4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationLUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
More informationV250 SERIES DIRECTIONAL CONTROL VALVES
V SERIES DIRECTIONAL CONTROL VALVES TAKE CONTROL OF YOUR HYDRAULICS Take control with Muncie Power Products V directional control valve. The V is constructed with high-grade iron castings and nickel-plated
More informationRPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.
REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding
More informationModular valves DO5 (NG 10) 315 bar
Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16
More informationCMF2 Series Applicable cylinder bore size: Max. ø160
4G/ M4G/ Individual wiring manifold ISO size 2 DIN terminal ox type 5 port pilot operated valve ISO conformed valve 2 Series pplicale cylinder ore size: Max. ø160 MN4G/ Common specifications 4G/ W4G/2
More informationSingle-circuit power brake valve LT 05
Single-circuit power brake valve L 05 RE 66 Edition: 09.0 Replaces: 08.00 Series X Service brake pressure 0, 60, 80, 00 and 5 bar HD 679 Features Small installation dimensions Integrated maximum pressure
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationFiltration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75
ccumulators 19 ccumulator ischarge Valve 3 Specifications Valve Function ccumulator ischarge Mounting Inline not restricted Fluid Mineral-oil or fluid HF / B / C / Viscosity 6... 25 SUS (1... 5 cst) Fluid-temperature
More informationENERPAC hydraulic valves are available in a wide variety of models and configurations.
irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that
More informationSDS180 DLS180. Sectional directional control valve
SDS8 DLS8 Sectional directional control valve SDS8/DLS8 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. Fitted with a main
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More information280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment.
280 Series Stainless Steel Rotary Direction ontrol Valve For hydraulics in a harsh environment. he 280 Series is a high pressure, 316 stainless steel, hydraulic rotary direction control valve. It is the
More informationDirectional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
More informationDirectional control valves catalogue NVD2 - NVS3
Directional control valves catalogue NVD - NVS Edition / roducts...... for mobile hydraulic applications Mechanical and Electric Cartridge Valves ressure control valves p max bar Counter balance valves
More information