Single-circuit power brake valve LT 05

Transcription

1 Single-circuit power brake valve L 05 RE 66 Edition: 09.0 Replaces: Series X Service brake pressure 0, 60, 80, 00 and 5 bar HD 679 Features Small installation dimensions Integrated maximum pressure limitation of the brake circuit Brake pressure proportional to actuation force Ergonomic adaption of the pedal blade angle possible ll pedal variations with slip resistant, removable rubber plates Contents Functional description echnical data Characteristic curve Ordering code Dimensions 5 Brake pedal variations 7 Related documents 8 Fields of application Construction equipment Material handling vehicles Forestry and agricultural machines Municipal vehicles Special vehicles RE 66/09.0, Bosch Rexroth G

2 L 05 ower brake valve Functional description Functional description he single-circuit powered brake valve L 05 is a directly Symbol L 05 operated pressure reducing valve in three-way design with stepless mechanical operation. It has a maximum pressure relief of secondary circuit and infinitely adjustable pressure which is in proportion to the travel of the operating element (5) or to the actuation travel angle of the pedal. he actuation force is also proportional to the travel of the actuator. he single-circuit power brake valve consists mainly of the housing () and control spool (), main compression springs (), operating element (5) and the return spring (). he valve is operated via the operating element (5). his pushes the main compression spring () against the control spool (). Firstly the control edges closes at channel, afterwards the flow from to is released in the braking circuit. he pressure building up in the brake line pushes simultaneously via the brake pressure return behind the control spool against the main compression spring () so that the brake pressure (secondary pressure) rises in proportion to the deflection of the operating element (5). With the deflection of the operating element (5) kept constant, the control spool () moves into the control position and holds the defined pressure constant. When the main compression spring () is unloaded, the return spring () move the control spool () back to initial position. he control edges close from to and open towards. hus closes the secondary circuit (braking circuit). DS DS Section L 05 5 Line connections he valve must be connected as shown in the circuit diagram. ort is to be connected to a drain line (the pressure of the drain line acts on the brakes max. 0.5 bar). orts Service brake Supply service brake ank DS DS ressure switch (brake light) ressure switch (accumulator pressure) Housing Control spool Main compression spring Return spring 5 Operating element Bosch Rexroth G, RE 66/09.0

3 ower brake valve L 05 echnical data echnical data General Weight Without pedal kg.7 Installation position Upright preferred ype of connection Metric threats according to DIN 85- mbient temperature range θ C 5 to +80 riming Single-layer coating RL 500 Hydraulic Maximum service brake pressure at port p bar 5 Maximum inlet pressure at port p bar 00 Maximum tank pressure at port p bar 0.5 (ank pressure must not exceed the pressure being applied by the brake.) Hydraulic fluid Mineral oil (HL, HL) according to DIN 55, other hydraulic fluids, such as HEES (synthetic esters) according to VDM 568 as well as hydraulic fluids as specified in the data sheet 90, on inquiry. Hydraulic fluid temperature range θ C 0 to +80 Viscosity range ν mm²/s.8 to 80 Maximum permitted degree of contamination of the hydraulic fluid, cleanliness class according to ISO 06 (c) Class 0/8/5, for this we recommend a filter with a minimum retention rate of β 0 75 Note For applications outside these parameters, please consult us! Characteristic curve ctuation force without and with pedal according to braking pressure ctuation force F without pedal [N] Brake pressure [bar] ctuation force F with pedal [N] at 50 mm distance to swivel axis RE 66/09.0, Bosch Rexroth G

4 L 05 ower brake valve Ordering code Ordering code L 05 MK X / / 0 M * Model code 0 Single-circuit power brake valve L 05 L 05 ype of actuation 0 Mechanical MK Series 0 0 to 9 (unchanged installation and connection dimensions) X Service brake pressure 0 0 bar bar bar bar 00 5 bar 5 Line connections 05 Metric threads according to DIN 85- (see table on page 5) 0 Seal material 06 NBR seals, suitable for mineral oil (HL, HL) according to DIN 55 M ccessories (optional) 07 Fitted with a standard brake pedal L 9 08 Further details in clear text * referred standard types ressure stage [bar] L 05 without pedal art no. L 05 with fitted standard pedal art no. 00 R90008 R R R R R R R R R Bosch Rexroth G, RE 66/09.0

5 Dimensions [mm] ower brake valve L 05 Dimensions 5 Dimensions Without pedal 60 F 06. ca DS 56.5 DS Ø59. ±0. Ø9 Ø6. + x M8/ Ø9 Ø6 Name plate ctuating stroke travel Mounting threads Mounting hole pattern in the base plate F ctuation force orts according to DIN 85- Ød ort d ±0, Ød t t M6 x.5 M6 x.5 M6 x.5 DS, DS M0 x 6 9 orts DS and DS plugged by default. d t t RE 66/09.0, Bosch Rexroth G

6 6 L 05 ower brake valve Dimensions Dimensions [mm] With fitted standard pedal L 9 00 F ca ca DS DS xø Base plate Rubber mat ctuation angle Distance 5 Mounting hole pattern in the base plate F ctuation force Bosch Rexroth G, RE 66/09.0

7 Dimensions [mm] ower brake valve L 05 Brake pedal variations 7 Brake pedal variations he power brake valve L 05 is optionally provided with or without pedal. he pedals L 9 and L 0 are available (Further variants on request). Standard type L 9 / ype L 9 with shortened pedal plate ype L 9 with detent α ype L 0 for horizontal fitted brake valves edal angle α adjustable in 5 increments: Hole = 5 Hole = 0 Hole = 5 Hole = 0 (Standard) Note ll pedal variations are fitted with a slip resistant, removable rubber plate by default. RE 66/09.0, Bosch Rexroth G

8 8 L 05 ower brake valve Related documents Related documents he power brake valves L 05 are hydraulic components to be used in power brake systems in mobile machines. lso observe the instructions for the other system components. Do not commission the product until you are provided with the following documentation and have understood and observed it. itle Document number Document type Hydraulic power brake valves for mobile applications 6600-B Operating instructions System documentation from the machine manufacturer Operating instructions Bosch Rexroth G Mobile pplications Zum Eisengießer 9786 Lohr am Main, Germany hone info.ma@boschrexroth.de his document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth G. It may not be reproduced or given to third parties without its consent. he data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. he information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging. Bosch Rexroth G, RE 66/09.0