DFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
|
|
- Janel Oliver
- 5 years ago
- Views:
Transcription
1 DFE Content Working conditions Hydraulic circuit DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes Positioner kits Solenoid parts Dimensional data Ordering codes... 7 Positioner kits Solenoid parts Dimensional data Ordering codes Positioner kits Solenoid parts DFE11 Dimensional data... 8 Ordering codes Positioner kits Solenoid parts DGR2E 53
2 DFE solenoid control monoblock valve Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm 2 /s cst viscosity at 4 C temperature. DFE52 DFE1 DFE2 DFE11 N. of available ways Nominal flow rating in steady conditions 6 l/min 9 l/min 14 l/min 9 l/min Operating pressure (maximum) * without drain bar psi with drain 315 bar psi vailable nominal voltage VDC VC 5Hz (with C4 connector) Nominal power W Internal leakage () T p= bar 145 psi with fuid and valve at 4 C 7cm 3 /min.43 in 3 /min 1 cm 3 /min.61 in 3 /min 15 cm 3 /min.92 in 3 /min Hydraulic fluid Mineral base oil Fluid temperature with NR seals from --2 C to8 C with FPM seals from --2 C to C Viscosity operating range from 15 to 75 mm 2 /s -- from 15 to 75 cst minimum maximum 12 mm 2 /s cst 4 mm 2 /s -- 4 cst Max. level of contamination --/19/16 -- ISO 446 mbient temperature for working conditions from --2 C to5 C NOTE -- For different working conditions please contact Sales Dept. (*) --This value is reachable only in steady conditions; for dynamic working conditions see the related pages. 1 cm 3 /min.61 in 3 /min Standard threads REFERENCE STNDRDS SP UN -UNF METRIC THRED ISO 228/1 ISO 263 ISO 262 ISO 262 CCORDING TO S 2779 NSI 1.1 unified CVITY ISO CCORDING TO SE J1926 J2244 DIN shape X or Y shape X or Y PORTS THRED LL PORTS SP UN -UNF METRIC (ISO ) DFE52 G3/8 3/4--16 (SE 8) M18x1,5 DFE1 G1/2 7/8--14 (SE 1) DFE2 G3/4 11/16--12(SE12) METRIC (ISO 6149) DF11 G1/2 7/8--14 (SE 1) M22x1.5 M22x1.5 DRIN PORT L G1/4 9/ (SE 6) 7/16--2 (SE4)* M12x1.5 M12x1.5 (*) For DFE52/8 and series DFE2 diverter valves Optional threads: for availability contact Sales Department 54 DGR2E
3 DFE Hydraulic circuit 2-way vailable as body only in DFE52/2 execution; for other executions 3--way body is used. Plug and return spring kit Solenoid Diverter valve body P Spool Spool type 1 2 Spool type 1 2 P P Performance data drop versus flow P Minimum dynamic conditions (supply = Vn--1%, coil at 7 C) Spool () With drain Without drain DGR2E 55
4 DFE solenoid control monoblock valve Hydraulic circuit 3-way It s possible to obtain 2--way diverter valve plugging port or. P Spool type 1 2 Spool type 1 2 Spool type D 1 2 P P P Performance data drop versus flow: P () DFE52/3 DFE1/3 DFE2/ Spool () Spool () Pressione Spool Spool Portata (l/min) Minimum dynamic conditions: (supply = Vn--1%, coil at 7 C) DFE52/3 DFE1/3 DFE2/ With drain Without drain 56 DGR2E
5 DFE Hydraulic circuit 6-way C D E F Spool type Spool type Spool type H 1 2 E C F D E C 1 2 F D 1 2 E C F D Performance data drop versus flow: E(C). DFE52/6 DFE1/6 DFE2/ Spool () Spool () Spool Spool Minimum dynamic conditions: (supply = Vn--1%, coil at 7 C) DFE52/6 DFE1/6 DFE2/ With drain Without drain DGR2E 57
6 DFE solenoid control monoblock valve HYdraulic circuit 8-way F G E D C H 1 2 E FCDGH Spool type E FCDGH Spool type Performance data drop versus flow C Minimum dynamic conditions (supply = Vn--1%, coil at 7 C) Spool Spool With drain Without drain 58 DGR2E
7 DFE Hydraulic circuit 12 -way 3 3 C3 D3 2 2 C2 D2 1 1 C1 D1 2 2 C2 D2 D3 C Spool type C1 D1 Performance data In position 1 drop versus flow In position 2 Minimum dynamic conditions (supply = Vn--1%, coil at 7 C) / / 1 3 With drain C1 C2 / D1 D2 C1 C3 / D1 D3 Without drain DGR2E 59
8 DFE52 solenoid control monoblock valve Dimensional data 2 -way DFE52/2 valve = 1.65 = = 24IH Emergency manual override = P = = DGR2E
9 DFE52 Dimensional data 3 -way DFE52/3 valve Emergency manual override P n.3 holes DGR2E 61
10 DFE52 solenoid control monoblock valve Dimensional data 6 -way DFE52/6 valve n.3 holes E F Emergency manual override C D E F DGR2E
11 DFE52 Dimensional data 8 -way DFE52/8 valve F G Emergency manual override C H , E D C F G H n.3 holes DGR2E 63
12 DFE52 solenoid control monoblock valve Ordering codes DEscription example : Diverter valve DFE52/2 18 ES - W 21-12VDC - <CVN> Valve is supplied painted as standard, with one coat of Primer black antirust paint W way body 2- way spool Y 3. I 3- way body 3- way spool way body 6- way spool DGR2E
13 DFE52 Ordering codes 2-way 1. ody * DFE52/2 3CO Standard body 4. Spool options 3CS positions with open centre in neutral 3CS positions with closed centre in neutral 3-way 1. ody * DFE52/3 3CO Standard body 4. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position D 3CS way, 2 positions, without transit position, with ports closed in rest position 6-way 1. ody * DFE52/6 3CO Standard body 5. Positioner kits page 67 YPE CODE DESCRIPTION 18...W 5TP1 Spring return in position Y 5GIU1 * Spring return in position 1, with G1/4 drain port 3. Tube assembly page 68 T ES 5SOL515 Spring return in position 1 (without coil) 2. Coil options page Without coil (only with tube kit) With ISO44 connector 21-12VDC 4SOL51512 Coil with 12VDC nominal voltage 21-24VDC 4SOL51524 Coil with 24VDC nominal voltage With integrated DEUTSCH DT4 connector VDC 4SOL51514 Coil with 12VDC nominal voltage VDC 4SOL51525 Coil with 24VDC nominal voltage I Optional connectors page 119 C2 2X11 ccording to ISO44 C19 5CON7 Type DEUTSCH DT6 4. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position H 3CS way, 2 positions, D C in position 1, F E in position 2, ports closed in transit position NOTE (*) - Codes are referred to SP thread. DGR2E 65
14 DFE52 solenoid control monoblock valve Ordering codes DEscription example : Diverter valve DFE52/8 8 ES3 - W 21-12VDC - <CVN> Valve is supplied painted as standard, with one coat of Primer black antirust paint I ody * DFE52/8 3CO Standard body, SP threaded 5. Spool options 3CS way, 3 positions with ports connected in transit position 3CS way, 3 positions with ports closed in transit position 6. Positioner kit page V81 Spring return in neutral position 4. Tube assembly page 68 ES3 5SOL515 With spring return in neutral position (without coil) 1. Drain options * page 67 W 3XTP71915 With drain plugged Y - With G 1/4 drain port NOTE (*) - Code are referred to SP thread. 3. Coil options page Without coil (only with tube kit) With ISO44 connector 21-12VDC 4SOL51512 Coil with 12VDC nominal voltage 21-24VDC 4SOL51524 Coil with 24VDC nominal voltage With integrated DEUTSCH DT4 connector VDC 4SOL51514 Coil with 12VDC nominal voltage VDC 4SOL51525 Coil with 24VDC nominal voltage I Optional connectors page 119 C2 2X11 ccording to ISO44 C19 5CON7 Type DEUTSCH DT6 66 DGR2E
15 DFE52 Positioner kits DFE52/2 - /3 - /6 18W kit Spring return in position 1 with plug. 18Y kit Spring return in position 1, with G1/4 joint for drain. L Plug - wrench Nm / 17.7 lbft Joint - wrench Nm / 17.7 lbft L G1/ Return spring Return spring DFE52/8 8kit Spring return in postion. 1 2 G1/4 L For drain, unscrew the plug llen wrench 6-24 Nm / 17.7 lbft Return spring Centering ring DGR2E 67
16 DFE52 solenoid control monoblock valve Solenoid parts ES tube assembly Wrench 2 2 Nm / 14.7 lbft Manual tightening; max. torque 6.6 Nm / 4.9 lbft M2x1 Push for manual override Operating features Plunger stroke... : 7.1 mm /.28 in Coil options Thermoplastic protective covering With ISO44 connector (weather protection IP65) Needs C2 connector, see page 119. With integrated DEUTSCH 4 connector (weather protection IP67) Needs C19 connector, see page Operating features Nominal voltage... : 12VDC / 24VDC Nominal voltage tolerance... : ±1% Power rating... : 38 W Duty cycle... : % Weather protection... : Depending on connector type Coil insulation... : Class H 68 DGR2E
17 DFE1 Dimensional data 3 -way DFE1/3 valve Emergency manual override P n.3 holes way DFE1/6 valve N 3 holes E F Emergency manual override C D E F DGR2E 69
18 DFE1 solenoid control monoblock valve Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - <CVN> Valve is supplied painted as standard, with one coat of Primer black antirust paint II way body W Y way spool 3. I 6- way body 6- way spool DGR2E
19 DFE1 Ordering codes 5. Positioner kits page 72 3-way 1. ody * DFE1/3 3CO Standard body 4. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position D 3CS way, 2 positions, without transit position, with ports closed in rest position 6-way 1. ody * DFE1/6 3CO Standard body 4. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position H 3CS way, 2 positions, D C in position 1, F E in position 2, ports closed in transit position N 3CS way, 2 positions with ports closed in transit position, with check valve 18...W 5TP2 Spring return in position Y 5GIU4 * Spring return in position 1, with G1/4 drain port 3. Tube assembly page 73 ES 5SOL516 Spring return in position 1 (without coil) 2. Coil options page Without coil (only with tube kit) With ISO44 connector 22-12VDC 4SOL51612 Coil with 12VDC nominal voltage 22-24VDC 4SOL51624 Coil with 24VDC nominal voltage 22-48VDC 4SOL51648 Coil with 48VDC nominal voltage 22-92VDC 4SOL51694 Coil with 92VDC nominal voltage (for 11VC): need C4 connector VDC 4SOL Coil with 192VDC nominal voltage (for 22VC): need C4 connector With flying leads and DEUTSCH DT4 connector VDC 4SOL Coil with 12VDC nominal voltage VDC 4SOL Coil with 24VDC nominal voltage I Optional connectors page 119 C2 2X11 ccording ISO44 C4 2X14 ccording to ISO44 with rectifier C19 5CON7 Type DEUTSCH DT6 II Ports plug G1/2 3XTP72718* ody conversion from 3 -way to 2 -way circuit NOTE (*) - Codes are referred to SP thread. DGR2E 71
20 DFE1 solenoid control monoblock valve Positioner kits 18W kit Spring return in position 1 with plug. 1 2 Plug - wrench Nm / 31 lbft Return spring Y kit Spring return in position 1, with G1/4 joint for drain. L 1 2 Joint - wrench Nm / 31 lbft L G1/ Return spring 72 DGR2E
21 DFE1 Solenoid parts ES tube assembly Wrench Nm / 17.7 lbft M22x1.5 Operating features Plunger stroke... : 1.2 mm /.4 in Push for manual override Manual tightening; max. torque 6.6 Nm / 4.9 lbft Coil options With ISO44 connector (weather protection IP65) Thermoplastic protective covering With flying leads and DEUTSCH DT4 connector (weather protection IP67) 3.94 Needs C2 connector, see page 119. Needs C19 connector, see page Operating features Nominal voltage... : VDC Nominal voltage tolerance... : ±1% Power rating... : 6 W Duty cycle... : % Weather protection... : depending on connector type Coil insulation... : Class H DGR2E 73
22 DFE2 solenoid control monoblock valve Dimensional data 3 -way DFE2/3 valve Emergency manual override n.3 holes P DGR2E
23 DFE2 Dimensional data 6 -way DFE2/6 valve N 3 holes E F Emergency manual override C D E F DGR2E 75
24 DFE2 solenoid control monoblock valve Ordering codes Description example : Diverter valve DFE2/3 18 ES - W 21-12VDC - <CVN> Valve is supplied painted as standard, with one coat of Primer black antirust paint II W Y 3- way body 3- way spool 3. I 6- way body way spool DGR2E
25 DFE2 Ordering codes 5. Positioner kits page 78 3-way 1. ody * DFE2/3 3CO Standard body 4. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position 6-way 1. ody * DFE2/6 3CO Standard body 4. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position H 3CS way, 2 positions, D C in position 1, F E in position 2, ports closed in transit position 18...W 5TP3 Spring return in position Y 5GIU7 * Spring return in position 1, with G1/4 drain port 3. Tube assembly page 78 ES 5SOL5191 Spring return in position 1 (without coil) 2. Coil options page Without coil (only with tube kit) With ISO44 connector 21-12VDC 4SOL Coil with 12VDC nominal voltage 21-24VDC 4SOL Coil with 24VDC nominal voltage 21-2VDC 4SOL51912 Coil with 2VDC nominal voltage (for 24VC): need C4 connector 21-94VDC 4SOL51994 Coil with 94VDC nominal voltage (for 11VC): need C4 connector VDC 4SOL Coil with 192VDC nominal voltage (for 22VC): need C4 connector With flying leads and DEUTSCH DT4 connector VDC 4SOL Coil with 12VDC nominal voltage VDC 4SOL Coil with 24VDC nominal voltage I Optional connectors page 119 C2 2X11 ccording ISO44 C4 2X14 ccording to ISO44 with rectifier C19 5CON7 Type DEUTSCH DT6 II Ports plug G3/4 3XTP732* ody conversion from 3 -way to 2 -way circuit NOTE (*) - Codes are referred to SP thread. DGR2E 77
26 DFE2 solenoid control monoblock valve Positioner kits 18W kit Spring return in position 1 with plug. 18Y kit Spring return in position 1, with G1/4 joint for drain. L Plug - wrench Nm / 31 lbft Joint - wrench Nm / 31 lbft Return spring G1/4 L Return spring Solenoid parts ES tube assembly Wrench 27 2 Nm / 14.8 lbft Manual tightening; max. torque 6.6 Nm / 4.9 lbft M27x1.5 Push for manual override Operating features Plunger stroke... : 1.2 mm /.4 in DGR2E
27 DFE2 Solenoid parts Coil options With ISO44 connector (weather protection IP65) Thermoplastic protective covering Needs C2 connector, see page 119. With flying leads and DEUTSCH DT4 connector (weather protection IP67) Needs C19 connector, see page Operating features Nominal voltage... : VDC Nominal voltage tolerance... : ±1% Power rating... : 6 W Duty cycle... : % Weather protection... : depending on connector type Coil insulation... : Class H DGR2E 79
DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationUmschaltventile Magnet
Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten
More informationWalvoil 2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch Gruppe mehr als Qualität
2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch mehr als Qualität DFE Contents Working conditions 48 Hydraulic circuit 49 DFE52 DFE1 DFE2 Dimensional data 53 Ordering codes 56 Positioner kits 59 Solenoid
More informationmechanical control valve
DF Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm /s -- 46 cst viscosity at 4 C temperature. DF5 DF DF DF5 N. of available ways --3--6
More informationUmschaltventile DF20/3. mit Hebel Bestellnr. Typ Code
Umschaltventile DF/3 Bestellnr. Typ Code mit Hebel 4-- DF/3AL 64 4-- DF/3A7L 6744 4-- DF/3A7SLP 64 4-- DF/3AT7SLP 64 4-- DF/3BC7CB 674 4-- DF/3AC7CA-TAP(A) 64 4--3 DF/3B7MEIA-TAP(B) 648 4--4 DF/3AMB 6
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationDirectional Control Valve
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. wide variety of spool options allows
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationSD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010
/ Way Solenoid Operated Directional Control Valves Poppet Type SD3E-B 7/8-4 UNF p max 40 bar (609 PSI) Q max 75 L/min (9.8 GPM) H 4063 7/0 Replaces H 4063 0/00 / way cartridge valves solenoid operated
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2014. Replaces HA /2013
/ Way Solenoid Operated Directional Control Valves Spool Type SDE- /-6 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 07/0 Replaces 0/0 Hardened precision working parts High flow capacity High transmitted
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationLine mounting From SAE08 to SAE16 cavities. 15 l/min (3.9 US gpm) from -20 C (-4 F) to 80 C (176 F) from -20 C (-4 F) to 100 C (212 F)
PU.. type flow control pressure compensated valves - ways Line mounting From SE to SE cavities Technical specifications and diagrams are measured with mineral oil of cst viscosity at C ( F) temperature.
More information4/3, 4/2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid
01/08 /3, /2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid 2.1 Type WE 10...L5X Size (NG) 10 Up to 350 bar Up to 150 L/min Contents Function and configurations -03 Specifications 0 Symbols 05
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 183-52/7.12 Replaces: 1.9 1/8 8_8 (EDZ) Size 4 Series Maximum operating pressure 31 bar
More informationDirectional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2012. Replaces HA /2010
4/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-4 /4-16 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 7/2012 Replaces 10/2010 4/2 way cartridge valves solenoid operated spool
More informationCartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
More information6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
More informationDHAXW4-07*/M DHOXW-06* Input Power. 32 W (only for 12 and 24 DC) 40 W (only for 110 and 220 DC) 8 W 25 W T6 T4 8 W 25 W T4 T3 T6 T4 T4 T3 25 W 8 W
www.atos.com Table TE137obs/E Stainless steel valves for water base fluids standard or ex-proof solenoid valves with Multicertification TEX, IECEx, EC or CULUS certification UL certified valves are obsolete
More informationORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More information6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
More informationVED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES
CONTINENTAL HYDRAULICS VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM TOUGH VED*M PROPORTIONAL
More informationMonoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
More information6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
More informationSDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
More information3/2 ways/positions flow diverters L (VS91-VS92-VS95)
3/2 ways/positions flow diverters L706... (VS91-VS92-VS95) RE 18302-03 Edition: 04.2016 Replaces: 02.2016 Size 12 Series 00 Maximum operating pressure 310 bar (4500 psi) Maximum flow 140 l/min (36.98 gpm)
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,
More informationDL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 18302-07/12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00
More informationDirectional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
More informationDirectional Control Valves. General Description. Features. Specifications
Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 1832-5/12.9 1/8 L721... (VS151-VS152-VS155) Size 6 Series 1 Maximum
More informationGPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
More informationDirectional Control Valves Series D111VW. General Description. Features. Performance Curves
Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional
More informationStand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ)
Stand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ) RE 18305-03 Edition: 02.2016 Replaces: 07.12 07.2012 Size 10 Series 00 Maximum operating pressure 250 bar (3600 psi) Maximum flow 90
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationDSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 2/117 ED DSE3 DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 41-3 p max 3 bar Q max l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 41-3-2-- (CETOP 4.2-4-3-3). 33 3.2 21. 12.7.1.7
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More information6/2 WAY DIRECTIONAL VALVE KV (NG 6)
6/2 WAY DIRECTIONAL VALVE KV (NG 6) NG 6 Up to 350 bar [5 076 PSI] Up to 50 L/min [13.2 GPM] Plug-in connector for solenoids to ISO 4400. Threaded connections to ISO 9974 (Metric), ISO 1179 (BSPP/Gas),
More information3/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 3/2 ways/positions flow diverters RE 18302-02/12.09 1/8 L705... (VS81-VS82-VS84-VS85) Size 6 Series 00
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
More informationVER*SP CONTINENTAL HYDRAULICS PROPORTIONAL PILOT RELIEF VALVES VER*SP - PROPORTIONAL PILOT RELIEF VALVES
CONTINENTAL HYDRAULICS VER*SP PROPORTIONAL PILOT RELIEF VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM DURABLE VER*SP PROPORTIONAL PILOT RELIEF VALVES
More informationNG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationVS6M - SOLENOID OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VS6M SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VS6M SOLENOID OPERATED DIRECTIONAL VALVES
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
More information6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More information4/3-4/2 Directional valve elements LF1_1 (LC1F-Z)
4/3-4/2 Directional valve elements LF1_1 LC1F-Z) RE 18305-01 Edition: 02.2016 Replaces: 07.12 07.2012 Size 6 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 35 l/min 9.25 gpm) Ports
More informationStainless steel valves for water base fluids standard or ex-proof solenoid valves with Multicertification ATEX, IECEx, EAC or CULUS certification
www.atos.com Table TE137-1/E Stainless steel valves for water base fluids standard or ex-proof solenoid valves with Multicertification TEX, IECEx, EC or CULUS certification Ex-proof solenoid Valve body
More informationDSE3B /118 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 215/118 ED DSE3B DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 4401-03 p max 350 bar Q max 40 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP 4.2-4-03-350)
More information6 to 12/2 ways/positions bankable flow diverters flangeable
6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/07.12 Replaces: 12.09 1/8 L711... (VS120F-VS125F) Size 4 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 20
More informationSD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012
3/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-A3 3/4-6 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) HA 404 /203 Replaces HA 404 07/202 Hardened and precision working parts
More informationSV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
More informationunrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67
3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
More information4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
RA 183-52/1.11 1/1 4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections B8_8 (EDBZ) Summary Description Page General specifications 1 Ordering
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
More informationChapter 2: Directional Control Valves
Contents Chapter : Directional Control Valves Series Description Direct operated Pilot operated Page DIN / ISO 06 10 16 5 3 10 16 5 3 Seat valves, electrically operated D1SE - Spool valves, electrically
More informationp max (see table of performances) Q max (see table of performances) bar Maximum flow rate from port P to A - B - T l/min
41 400/117 ED E*P4 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC (C*P4) CONTROLLED E4P4 CETOP P05 E4R4 ISO 4401-05 E5 ISO 4401-08 p max (see table of performances) Q max (see table of performances)
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationSolenoid directional valves type DPHI, DPHU
www.atos.com Table E0805/E Solenoid directional valves type, two stage, ISO 4401 size 10, 16, 25 and 32 37**/HM..... and are spool type, two or three position directional two stage solenoid valves designed
More informationVER03MP CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED
CONTINENTAL HYDRAULICS VER03MP PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.
More informationDirectional Control Valves, electrically operated Type WE 5 Huade América 1
Directional Control Valves, electrically operated Type WE 5 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Directional control valves, electrically operated Type WE 5 Size5 up to 25
More information6 to 12/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/12.09 1/10 L711... (VS120F-VS125F)
More informationEV FT3 ES-FT5 ES/GB :09 Pagina 4 FT3 ES* 4
EV FT3 ES-FT5 ES/GB 4 15-07-2008 16:09 Pagina 4 5 1 HOW TO READ THE MODEL CODE FOR VALVES FT3 - ES - * FT3 - ES - (1) (C) - * - (024C) / 10 2 FUNCTIONAL SYMBOLS 1C 1N 1 2 3 4 5 6 7 1 FT3 4-way directional
More informationSymbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
More informationDIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD3-ES-*-/10 CETOP MPa HD3 - ES - (1) (C) - * - (024C) (-) / 10
table HD-0/ (07/0) DIRECTIONAL CONTROL VALVE SOLENOID OPERATED TYPE HD-ES-*-/0 CETOP 0-5 MPa /5 HOW TO READ THE MODEL CODE FOR HD-ES - Pressure 5 MPa (50 bar) HD - ES - () (C) - * - (0C) (-) / 0 5 6 7
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationSDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
More informationHYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES
VINCKE DIRECTIONAL CONTROL VALVES TECH-DCV200.1 index 3 link to your page / link a su página Monoblock hydraulic distributors Monoblock hydraulic distributors 35 liters 3 P35 Monoblock hydraulic directional
More informationVALVES POWER TRANSMISSION T E C H N I C A L C A T A L O G
VLVES POWER TRNSMISSION T E C H N I C L C T L O G Power transmission POCLIN HYDRULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.
More informationTESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES
ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted
More information4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
More informationDIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
More informationDL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min
41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationExplosion-Proof Valves. According to Directive 94/9/EC (ATEX) and IECEx Requirements
Explosion-Proof Valves ccording to Directive 94/9/EC (EX) and IECEx Requirements WRNING USER RESPONSIILIY FILURE OR IMPROPER SELECION OR IMPROPER USE OF HE PRODUCS DESCRIED HEREIN OR RELED IEMS CN CUSE
More informationSolenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional valve elements L808103P (ED4-PT1) of Tank unloaded excess flow. RE Edition: Replaces:
Directional valve elements L80810P with proportional (ED4-PT1) control of Tank unloaded excess flow L80810P (ED4-PT1) RE 1801-1 Edition: 09.2016 Replaces: 07.12 01.2016 Size 6 Series 00 Maximum operating
More informationGeneral Specifications DRV DRV-Exm DRV-Exd
direct operated, 3-way pressure reducing valve Q max = 8 l/min pressure range = - 5 bar body stainless steel (optional) Description The proportional pressure reducing valve (3-way function) is used to
More informationVSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VSNG10 SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VSNG10 SOLENOID OPERATED DIRECTIONAL VALVES
More informationQ max 300 l/min. Fluid temperature range C Fluid viscosity range cst Recommended viscosity cst 25
41 420/103 ED DSP7 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC(DSC7) CONTROLLED SERIES 10 CETOP 07 p max (see performance ratings table) Q max 300 l/min MOUNTING INTERFACE CETOP 4.2-4-07-320 The DSP7
More informationHigh Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
More informationIntroduction. Pressure drops
Directional control valves CETOP 5/NG0 Introduction The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CETOP
More informationPilot Operated Proportional DC Valve Series D*1FW / D*1FT
Characteristics The D*1FW / D*1FT pilot-operated proportional DC valves are available in NG10 (CETOP5), NG16 (CETOP7) and NG25 (CETOP8). These valves (D*1FW) are controlled electrically with the external
More informationQ max (see specifications table)
41 260/103 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVES EXPLOSION-PROOF VERSION EEx-dIIC SERIES 20 MD1K CETOP 03 E4P4K CETOP P05 E07P4K CETOP 07 E5P4K CETOP 08 E10P4K CETOP 10 p max (see specifications
More informationSECTIONAL DIRECTIONAL CONTROL VALVES
SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and
More information