Lockit Strain Relief Bushings

Size: px

Start display at page:

Download "Lockit Strain Relief Bushings"

Chloe Lynn Leonard
6 years ago
Views:

1 STRIN RELIEF

Lockit Strain Relief ushings R R Round Wire Lockit and R Flat Wire Lockit are additions to our strain relief line.

an be pre-assembled onto wire since chassis insertion isn t required to keep it locked on the wire.

Moulded of UL and S approved nylon 6/6, these parts are available in black or white.

Independent of insertion into the panel, Lockit Strain Reliefs self-lock on the cable.

Lockits protect the lifeline of your electrical/electronic products by absorbing the forces of push and pull that may be exerted on the flexible power cord.

Three finger design securely anchors into panel as thin as.032" and as thick as.157" for a neat, clean appearance. Five locking steps accommodate a wide range of thicknesses.

2 Lockit Strain Relief ushings R R Round Wire Lockit and R Flat Wire Lockit are additions to our strain relief line. Installs with fingertip pressure into an easily punched standard round or double strain relief hole. an be pre-assembled onto wire since chassis insertion isn t required to keep it locked on the wire. Multiple panel locking steps snug lockit strain relief into range of panel thicknesses up to.187". UL recognized (far exceeds UL s 35 lb. pull-out test). Moulded of UL and S approved nylon 6/6, these parts are available in black or white. utomated application equipment (available separately) speeds assembly and lowers costs while reducing or eliminating repetitive manual assembly motions. LOKIT ssembly friendly! Independent of insertion into the panel, Lockit Strain Reliefs self-lock on the cable. They may be preassembled offline for final assembly at a later time or remote location for lower installed cost. Perfect for jobs in the field. Lockits protect the lifeline of your electrical/electronic products by absorbing the forces of push and pull that may be exerted on the flexible power cord. Their rectangular design eliminates the possibility of part rotation under forces of twist. They hold so well they pass the UL pull-out test requirements without panel support. Three finger design securely anchors into panel as thin as.032" and as thick as.157" for a neat, clean appearance. Five locking steps accommodate a wide range of thicknesses. Moulded of UL and S approved nylon 6/6, these parts are available in black or white. LOKIT LKITS Our labkits are perfect for product design departments, experimental labs and for all prototype work. LKIT 11 is an assortment of Lockit strain relief bushings with approximately the following quantities and part numbers. (ontent may vary.) 8 each R101-, R101, R201-2, R201, R100, R100, R200, R200-2, ST100N, ST200N, ST100L, ST101N ST201N, ST301N 6 each R301-2, R301, R401, R ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com

Strain Relief ushings For other applications METL Made of plated steel, exclusively for round cables.

Easily assembled (with recommended hand pliers) to wire and cables inside the chassis.

suitable for meeting European requirements is available. EE Series USR Series ords anada Ltd.

3 Strain Relief ushings For other applications METL Made of plated steel, exclusively for round cables. These absorb pull force only (to help meet UL and S requirements). Easily assembled (with recommended hand pliers) to wire and cables inside the chassis. FOR EUROPEN REQUIREMENTS For those of you dealing with overseas markets, a variety of strain reliefs suitable for meeting European requirements is available. EE Series USR Series ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com 147

Gripmaster Strain Reliefs Provides reliable terminal protection for all types of cord-equipped appliances and instruments where space is limited and high volume production is required.

Wire iameter GRIPMSTER #1 GRIPMSTER #2 GRIPMSTER #3 GRIPMSTER #6 Minimum order 1000..250.312.187.343 Gripmaster Hand Tool available (fits all sizes)..187.250.312.343.281.

4 Gripmaster Strain Reliefs Provides reliable terminal protection for all types of cord-equipped appliances and instruments where space is limited and high volume production is required. The Gripmaster has a fibre insulating material retained in a cold-rolled steel frame. When applied, it forms a compact, rugged ring that firmly grips the cord. pprox. Wire iameter GRIPMSTER #1 GRIPMSTER #2 GRIPMSTER #3 GRIPMSTER #6 Minimum order Gripmaster Hand Tool available (fits all sizes) Power Supply ords Typical applications: Jacketed cords: SVT-type is used for light duty appliances, vacuum cleaners, business machines. SJT-type is similar to SVT, but has heavier insulation, and is used for portable drills, portable lamps, appliances, refrigerators and washers. Parallel cords: HPN-type is a heater cord and is used for coffee makers, toasters, irons, portable heaters. Jacketed OR #1 OR #3 OR #4 OR #5 OR #6 Parallel escription 8 ft., SVT, ft., SJT, ft., SJT, ft., SJT, ft., SJT, 105 escriptions: SVT & SJT cords: three-prong male plug on one end, other end outer jacket removed 2" and stripped 1/2". HPN cords: three-prong male plug one end, other end split 2" and stripped 1/2". OR #7 OR #8 olour: lack only. 8 ft., HPN, 90 8 ft., HPN, ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com

5 Straight-Thru Strain Relief ushings FOR FLT LES r= _ MOUNTING 2 HOLE The original strain relief the first and still the best. Moulded of nylon 6/6 and UL and S certified, these strain reliefs protect the lifeline of your electronic/electrical products by absorbing the forces of push, pull and twist that may be exerted on the flexible power cord. They securely anchor, insulate and protect cables at panel entry points. Hole ia. SR4K-4 Same as SR4N-4 except SR4L-4 Same as SR4N-4 except SR4K & HPN HPN & HPN WG/ onductors pproximate.15x.28.15x.34.16x.30 ody SR2P lock 20/2.09x.18.11x.21 SR2L-1 Same as SR2P-4 except SR *.12x.22 SR3P-4 Same as SR3-4 except SR3W-1 Same as SR3-4 except.100 SR3L-1 Same as SR3-4 except.156 SR4P SR4N HPN SR4L-1 Same as SR4K-1 except.187 SR5KN SR5K-4 Same as SRKN-4 except SR6N4-4 SR6P4-4 Same as SR6N4-4 except SR5W HPN & Standard colour: lack. White and other colours available at premium charge if quantities are sufficient. *To install strain reliefs for.040" maximum panel thickness, use R291 hand pliers..12x.22.15x.28.19x.35.20x.37.16x ontinued ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com 149

6 Straight-Thru Strain Relief ushings FOR FLT LES ONTINUE Hole ia. WG/ onductors pproximate ody SR30-1** SR33-1** SR34-2 SR31-2 SR300-1**.560**.750** **.875** OHM 12/2 12/3 12/3 10/3.19x.35.19x.39.20x.37.20x.43.20x.37.20x.43.24x.42.24x.51.24x.42.24x.51.29x.51.29x.65.32x.65.32x.65.06x.40 SR302-1** Same as SR300-1 except Standard colours: lack. White and other colours available at extra charge if quantities are sufficient. **Use elongated hole. Wire is not UL/S covered FOR FLT LES with flex-protecting internal radii Hole ia. WG/ onductors pproximate ody SR * & HPN SR4N-6 Same as SR4-6 except SR4K-6 Same as SR4-6 except x Standard colours: lack. White and other colours available at extra charge if quantities are sufficient. *To install strain reliefs for.040" maximum panel thickness, use R291 hand pliers. 150 ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax:

Straight-Thru Strain Relief ushings ONTINUE FOR ROUN LES.956 r= _ MOUNTING 2 HOLE r= _ 2.255 FOR SR-7KR-2 ONLY r= _ MOUNTING 2 HOLE Hole ia..375.450 WM SV & SVT WG/ onductors -- pproximate -.187*.

7 Straight-Thru Strain Relief ushings ONTINUE FOR ROUN LES.956 r= _ MOUNTING 2 HOLE r= _ FOR SR-7KR-2 ONLY r= _ MOUNTING 2 HOLE Hole ia WM SV & SVT WG/ onductors -- pproximate -.187* ody.438 SR2M-1 SR5MN-3 SR5M-3 Same as SR5MN-3 except SR5N SV SVT.255 HP SR5P-4 Same as SR5N-4 except SR5L-1 Same as SR5N-4 except SR5P3-4 SR6W-1 SR6N SV & SVT HP SJ, SJT & SJO SJ, SJT & SJO SR6P-4 Same as SR6N-4 except.578 SR6N3-4 SJ, SJT & SJO 18/ SR6P3-4 Same as SR6N3-4 except.578 SR6L-1 SR7K SR7KR-2 Same as SR7K-2 except See Schematic SJ, SJT & SJO SJ, SJT & SJO Standard colours: lack. White and other colours available at extra charge if quantities are sufficient. *WM cable only. 18/ ontinued ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com 151

8 Straight-Thru Strain Relief ushings FOR ROUN LES ONTINUE Hole ia. WG/ onductors pproximate ody SR7N SJT S & ST 18/ SR7P-2 Same as SR7N-2 except.750 SR7W SJT.750 S & ST SR7L-2 Same as SR7W-2 except SR SJT.812 SR8N S & ST.828 SR8P-2 Same as SR8N-2 except SR8L-2 Same as SR8N-2 except.187 SR9P S S, ST & SO 12/3 12/3 12/ Standard colours: lack. White and other colours available at premium charge if quantities are sufficient. 12/2 12/3 10/2 10/ STRIN RELIEF LKITS Our labkits are perfect for product design departments, experimental labs and for all prototype work. LKIT 1 is an assortment of strain reliefs with approximately the following quantities and part numbers. (ontent may vary.) 20 each SR3P-4 15 each SR4N-4, SR5P-4, SR6W-1, SR6N each SR5K-4, SR4K-6, SR14-1, SR8R each SR4N-5, SR5N-5 6 each SR7P-2, SR each SR30-1, SR5N-7 4 each SR8P-2, SR4N-7 1 each SR9P ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com

FOR FLT LES Right ngle Strain Relief ushings r= _ 2 r= _ 2 MOUNTING HOLES MOUNTING HOLES Provides the same protection for your power supply cable as the straight-thru type and exits the cable flush

9 FOR FLT LES Right ngle Strain Relief ushings r= _ 2 r= _ 2 MOUNTING HOLES MOUNTING HOLES Provides the same protection for your power supply cable as the straight-thru type and exits the cable flush against the chassis, saving space and directing the cable parallel to the panel. Overcomes space limitations and acts as a back or bottom bumper. Moulded of UL and S approved nylon 6/6. SR13-1 SR14-1 SR14-1 SR16-1 SR20-1** Hole ia **.450 Same as SR14-1 except ** HPN HPN WG/ onductors pproximate.12x.22.15x.28.16x.30.19x.35.20x.37.16x.37.19x.35.19x.39.20x.37.20x.43 Head.234 ody SR20L-1 Same as SR20-1 except.812 SR23-1** SR24-1 SR ** ** /2 12/3 10/3.20x.37.20x.43.24x.42.24x.51.24x.42.24x.51.29x.51.29x.65.32x Standard colours: lack. White and other colours available at premium charge if quantities are sufficient. **Use elongated hole..812 ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com 153

Right ngle Strain Relief ushings ONTINUE FOR ROUN LES r= _ 2 MOUNTING HOLES Provides the same protection for your power supply cable as the straight-thru type and exits the cable flush against the

10 Right ngle Strain Relief ushings ONTINUE FOR ROUN LES r= _ 2 MOUNTING HOLES Provides the same protection for your power supply cable as the straight-thru type and exits the cable flush against the chassis, saving space and directing the cable parallel to the panel. Overcomes space limitations and acts as a back or bottom bumper. Moulded of UL and S approved nylon 6/6. SR15-1 SR10-2 SR11-2 Hole ia SV & SVT HP SJ, SJT & SJO SJ, SJT & SJO S & ST WG/ onductors 18/4 pproximate Head ody SR11K-2 Same as SR11-2 except SR SJT Standard colours: lack. White and other colours available at extra charge if quantities are sufficient ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com

Strain Pigtail Relief Strain ushings Relief ushings ONTINUE FOR FLT LES with integral nylon spring r= _ MOUNTING 2 HOLE These nylon 6/6 UL and S approved parts protect the lifeline of your

11 Strain Pigtail Relief Strain ushings Relief ushings ONTINUE FOR FLT LES with integral nylon spring r= _ MOUNTING 2 HOLE These nylon 6/6 UL and S approved parts protect the lifeline of your electrical/electronic products by absorbing forces of pull, push, twist and flex. dd reliability, longevity and safety. Will pass S s 50,000 cycle vacuum cleaner test. Securely anchors, insulates and protects cables at panel entry points. Integral nylon spring eases the cable into a lazy bend and prevents sharp bending; assures longest cable and product life. They are not recommended for applications where the power supply cord is subject to whipping or jump rope type motion. Hole ia. SR4N & HPN WG/ onductors pproximate.15x.28 Extension Standard colours: lack. White and other colours available at premium charge if quantities are sufficient. ody FOR ROUN LES with integral nylon spring Hole ia. SR5N SV & SVT WG/ onductors pproximate Extension Standard colours: lack. White and other colours available at premium charge if quantities are sufficient. HP ody SR5P-7 Same as SR5N-7 except SR6N-7 SJ,SJO&SJT SR6P-7 Same as SR6N-7 except SR6N3-7 SJ, SJO & SJT SR6P3-7 Same as SR6N3-7 except SR7P SJT S & ST 18/ / ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com 155

Strain ell-mouth Relief Strain ushings Relief ushings FOR FLT LES r= _ MOUNTING 2 HOLE These nylon 6/6 UL and S approved parts protect the lifeline of your electrical/electronic products by absorbing

12 Strain ell-mouth Relief Strain ushings Relief ushings FOR FLT LES r= _ MOUNTING 2 HOLE These nylon 6/6 UL and S approved parts protect the lifeline of your electrical/electronic products by absorbing forces of pull, push, twist and flex. Securely anchors, insulates and protects cables at panel entry points. Flared trumpet exit eases the cable into a lazy bend, prevents sharp bending and assures longer cable and product life. SR2P-5 SR3P-5 SR4N-5 SR6K-5 Hole ia lock & HPN HPN WG/ onductors 20/2 pproximate.09x.18.11x.21.12x.22.15x.28.16x.30.15x.34.16x.37.16x.30 Head ody FOR ROUN LES SR5N-5 SR6P-5 SR6P2-5 SR6N3-5 Hole ia SV & SVT HP SJ,SJO&SJT SJ,SJO&SJT SJ,SJO&SJT WG/ onductors 18/4 pproximate Head SR6P3-5 Same as SR6N3-5 except Standard colours: lack. White and other colours available at premium charge if quantities are sufficient ody ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com

R29 and R30 Strain Relief ushings ssembly ONTINUE Pliers R29 hand pliers are adjustable for all Heyco strain relief bushings (except SR3-4 and SR4-6) that assemble into holes up to 7/8" diameter.

R301 (not shown) hand pliers are adjustable for parts SR7N-2 and SR8N-2 only. R100 R100 hand pliers are designed specifically for Lockit strain relief bushings (excluding ST201N).

ctivated with a flap handle, the air tool has interchangeable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a snap.

13 R29 and R30 Strain Relief ushings ssembly ONTINUE Pliers R29 hand pliers are adjustable for all Heyco strain relief bushings (except SR3-4 and SR4-6) that assemble into holes up to 7/8" diameter. R30 adjustable hand pliers are for use with strain relief bushings that assemble into 3/4" and larger diameter holes. R291 (not shown) hand pliers are adjustable for parts SR3-4 and SR4-6 only. R301 (not shown) hand pliers are adjustable for parts SR7N-2 and SR8N-2 only. R100 R100 hand pliers are designed specifically for Lockit strain relief bushings (excluding ST201N). Please call us for information on semi-automatic assembly equipment. ir Tool Hand air tool eliminates operator fatigue and improves assembly rates. ctivated with a flap handle, the air tool has interchangeable jaws to cover our entire range of strain reliefs. The included air fittings and hose make connection to your compressed air system a snap. One set of jaws is furnished with each air tool. different set of jaws is needed for each mounting hole diameter and special jaws are required for SR3-4 and SR4-6. Please advise both the mounting hole size and the strain relief part number when ordering an air tool or air tool jaws. There is a conversion kit available which provides the necessary components to convert a hand air tool to a bench mounted unit. The bench air tool can be mounted in any convenient position on the assembly area work surface. Unit is foot activated, leaving the operator s hands free. ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax: cords@cordscanada.com 157

14 158 ords anada Ltd., 62 ensley venue, Toronto, ON M6M 5E1 Toronto/GT: North merica toll free: Fax:

Adhesive Nylon Wire and Cable Clips

Adhesive Nylon Wire and Cable Clips dhesive Nylon Wire and able lips acked with closed-cell, foamed polyurethane adhesive tape for excellent conformability, high temperature and solvent resistance, plus high ultimate bond strength. Mounting