BUSHINGS AND GROMMETS

Size: px

Start display at page:

Download "BUSHINGS AND GROMMETS"

Arron Nelson
6 years ago
Views:

1 USHINGS ND GROMMETS

Snap ushings These nylon bushings convert raw-edged holes to smooth, neat, insulated ones. Special locking fingers allow the bushings to snap into holes with fingertip pressure.

2 Snap ushings These nylon bushings convert raw-edged holes to smooth, neat, insulated ones. Special locking fingers allow the bushings to snap into holes with fingertip pressure. Mechanically protect, insulate, and isolate telecommunications and electrical cables, tubing, hose, rope and utility lines. S312-3, S375-4 and S437-4 are also available as brasscoloured parts for lamp and lighting applications. C S * S250-2* S312-3* S375-3 S S * S437-4 S437-5 S S , S-5 S-6 S562-5 S562-6 S S625-4 S625-7 S625-8 S625-* S , S687-9 S750-6 S750-8 S750-9 S Standard colour: lack. White and other colours available at premium charge if quantities are sufficient. *Depicts single chassis design. Continued 8

3 Snap ushings CONTINUED C S * S812-9 S S875-6 S S875-8 S875-9 S S S S S S S S S S S S1-17 S S1-21 S S S S S S S S S S S S Standard colour: lack. White and other colours available at premium charge if quantities are sufficient. *Depicts single chassis design. 9

Snap ushings for Thicker Panels Has the same application as the snap bushings but can accommodate a thicker panel. Locking fingers snap into holes with fingertip pressure.

4 Snap ushings for Thicker Panels Has the same application as the snap bushings but can accommodate a thicker panel. Locking fingers snap into holes with fingertip pressure. Withstands a push-back force of 35 pounds. ST-6 ST ST ST ST C ST ST ST1-21 ST ST Standard colour: lack. White and other colours available at premium charge if quantities are sufficient. 10

Shorty ushings ll the same features as the standard snap bushings but can accommodate a smaller chassis thickness. Locking fingers securely snap into holes with fingertip pressure.

5 Shorty ushings ll the same features as the standard snap bushings but can accommodate a smaller chassis thickness. Locking fingers securely snap into holes with fingertip pressure. sk about our Labkit 2 containing an assortment of shorty and snap bushings for R & D purposes C * Standard colour: lack. White and other colours available at premium charge if quantities are sufficient. *UL and CS approval pending. 11

Open/Closed ushings black nylon bushing for side entry and encirclement of preassembled harnesses, capillary tubes or other units that have sections larger than the bushing s ID.

6 Open/Closed ushings black nylon bushing for side entry and encirclement of preassembled harnesses, capillary tubes or other units that have sections larger than the bushing s ID. Can also be assembled into holes that already contain cable or tubing. Fingertip pressure snaps the bushing into the mounting hole, forming a complete circle and insulation barrier against the raw edge of the chassis hole. OC375 OC437 OC OC562 OC625 OC C.390 OC875 OC1000 OC1093 OC1250 OC1375 OC Standard colour: lack. White and other colours available at premium charge if quantities are sufficient. 12

7 UNIVERSL Universal ushings These nylon bushings absorb vibration, cushion and insulate cables, tubing, hoses or shafts. They feature flexible shutters which adjust to accommodate and support any shape. Easily locked into mounting hole with simple fingertip pressure. The Shorty Universal ushing is ideal for a thinner chassis thickness. U U625 U750 U812 U Maximum U1000 U1093 U1375 U Standard colour: lack. White and other colours available at extra charge if quantities are sufficient. SHORTY UNIVERSL SU SU625 SU750 SU875 SU Maximum Standard colour: lack. White and other colours available at extra charge if quantities are sufficent. 13

rmour (nti-short) ushings Used at entrance to flexible metallic conduit or armoured cable. Insulates and protects electrical wires from being cut by rough conduit ends.

Suitable for installation at temperatures as low as -40 F. Will Fit These rmoured Cables Fits Cable ID Inside Dia. 0 14/2, 14/3, 12/2, 12/3.29 -.33.37 1 14/4, 6/1, 4/1,.33 -.42.

8 rmour (nti-short) ushings Used at entrance to flexible metallic conduit or armoured cable. Insulates and protects electrical wires from being cut by rough conduit ends. Chamfered lead-in allows for fast installation. lso used in holes through which ropes and steel cables pass, to prevent chafing, cutting or scraping, where bushing space is very limited. Suitable for installation at temperatures as low as -40 F. Will Fit These rmoured Cables Fits Cable ID Inside Dia. 0 14/2, 14/3, 12/2, 12/ /4, 6/1, 4/1, /4, 10/2, 10/3, 2/ /4, 8/2, 8/3, 1/ Minimum order Standard colour: Red. USHING SSORTMENT LKIT Our labkits are perfect for product design departments, experimental labs and for all prototype work. LKIT 2 is an assortment of bushings with approximately the following quantities and part numbers. (Content may vary.) 25 each S250-2, , S375-4, OC375, S each ST-6, UT 15 each OC, U each OCU625, , SU875 8 each OCU750, U875 4 each ST , S , S each S Toronto/GT: Toronto Calling North rea: merica toll free: Outside Toronto rea: Fax: Fax: cords@cordscanada.com

9 Grommeting EXTRUDED SERRTED POLYETHYLENE Use grommeting to protect tubes, wires and cables from becoming frayed or cut by sharp panel edges. Makes bushings for all sizes and shapes of panel cutouts in sheet metal, glass, wood panels or other sheet-form materials. No tools required just cut to size and insert. Depending on the panel thickness, grommeting may grip tightly by itself, or it may need a touch of epoxy to keep it in place. H W T GRPE 40 GRPE 52 GRPE 62 GRPE GRPE 100 GRPE 125 GRPE 187 GRPE Minimum order 1 roll. Sold in rolls of 100 ft. only. Standard colour: Natural CONTINUOUS SERRTED NYLON H W T GR 40 GR 52 GR 62 GR 85 GR 100 GR 125 GR 187 GR Minimum order 1 roll. Sold in rolls of 100 ft. only. Standard colour: lack or natural white. Specify colour when ordering. 15 Toronto/GT: Toronto Calling North rea: merica toll free: Outside Toronto rea: Fax: Fax: cords@cordscanada.com

Grommeting CONTINUED EXTRUDED UNSERRTED POLYETHYLENE H W T GRUPE 40 GRUPE 52 GRUPE 62 GRUPE 85.052.085.190.190.200.200.170.170 GRUPE 100 GRUPE 125 GRUPE 187 GRUPE 250.100.187 Minimum order 1 roll.

10 Grommeting CONTINUED EXTRUDED UNSERRTED POLYETHYLENE H W T GRUPE 40 GRUPE 52 GRUPE 62 GRUPE GRUPE 100 GRUPE 125 GRUPE 187 GRUPE Minimum order 1 roll. Sold in rolls of 100 ft. only. Standard colour: Natural rowse our index to get an idea of the range of products we carry. nd see our line card on page

ENCLOZ SCREW Grommets Front mounted grommets provide added thread engagement and increased bearing area.

points. ccommodates variations in hole size and panel thicknesses. Panel thickness ranges from.020 to.140 and accepts a #8 or #10 screw.

Snap-in grommet covers the screw point with an attractive, decorative head. ccepts a #8 screw.

11 ENCLOZ SCREW Grommets Front mounted grommets provide added thread engagement and increased bearing area. Non-conductive parts fully encapsulate metal screws, providing electrical insulation and protecting against temperature/moisture transfer and exposed screw points. ccommodates variations in hole size and panel thicknesses. Panel thickness ranges from.020 to.140 and accepts a #8 or #10 screw. ENCLOZ REVERSE Ideal when components are fastened from the opposite side of the panel. Snap-in grommet covers the screw point with an attractive, decorative head. ccepts a #8 screw. PLSTI-GROMMETS TM One-piece, non-corrosive nylon, self-retaining blind screw receptacle spreads load over wide area for strength and high load bearing capacity. Front snap-in. Insulate at fastening points, protect against electrolytic action, eliminate cross threading. Choose from different panel hole sizes, panel thickness ranges, screw sizes, head sizes or prong lengths. 17

earing load ratings up to 8000 PSI and speed ratings up to 2000 feet per minute ensure durability.

12 earing ushings With positioning key These bearing bushings offer easy, fast assembly. The axial slot helps maintain proper fit and compensates for temperature or humidity changes. earings perform effectively from -40 F to +200 F. earing load ratings up to 8000 PSI and speed ratings up to 2000 feet per minute ensure durability. earings are suitable for a wide range of applications such as vending machines, printers and home appliances. They are available as a flanged bearing with or without a positioning key or as a snap-in bearing. Without positioning key Snap-in bearing 18

TYPE 1 (Flush fits gauge material) Fits Hole. Size A B C D E F 3/8 3/8 3/4 3/4 1/2 7/8 5/8 5/8 1-1/16 13/16 11/16 1-1/16 3/4 7/ /32

TYPE 1 (Flush fits gauge material) Fits Hole. Size A B C D E F 3/8 3/8 3/4 3/4 1/2 7/8 5/8 5/8 1-1/16 13/16 11/16 1-1/16 3/4 7/ /32 Snap-In Plugs TYPE (Flush fits -6 gauge material) Flush Front NI 659* NI 659- NI NI 0 NI 0-S Fits Hole Size C D E F /8 /8 / 5/8 5/8 - /6.0.0.50.675.675.75.75.65.0.05.00.55.0.0.060.080 NI 7 NI NI 8 NI NI