4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
|
|
- Eric Freeman
- 5 years ago
- Views:
Transcription
1 .7 ontents Description Product Selection Technical Data and Specifications Dimensions Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel Mount These heavy duty toggle switches are available in either two- or three-position. The three-position switches offer a unique positive center stop feature, which assures that the lever cannot be thrown from one side through the center OFF position without stopping. This design feature is a major factor in their widespread acceptance for motor reversing and speed control applications. The most common application for the switch is to help prevent motor damage resulting from the high current generation by counter EMF of the armature at the time of reversing. This type of device is referred to within the industry as an antiplugging, hesitation, positive stop or positive off switch. Typical applications include bench tools, coach and truck (electric lift) and X-ray equipment. Flush Mount These three-position switches also offer the positive center stop feature where the lever cannot be thrown from one side through the center OFF position without stopping. The high ratings of this series allow it to be used with a broad range of heavy duty applications. opper contacts and brass screw terminals are standard. Standards and ertifications UL Recognized (except where noted) S ertified (where noted) Volume Vehicle and ommercial ontrols 08000E November 0 V-T-7
2 .7 Toggle Switches Product Selection One-Hole Panel Mount ircuit with Toggle in Rating, Vac 0, 0 Vac / hp, 0 Vac, Vac 0, 0 Vac / hp, 0 Vac, Vac 0, 0 Vac / hp, 0 Vac Poles and Throw Flush Mount ircuit with Toggle in Rating 0, Vac/Vdc 0, 0 Vac/Vdc 0, Vac/Vdc 0, 0 Vac/Vdc Notes Listed rating for Vac also applies at 8 Vdc. Supplied in a four-pole base. S ertified. lso rated, 00 Vac; -/ hp, 0 Vdc; hp, 0 Vac. lso rated hp, 0 Vac/Vdc. UP ENTER DOWN (Keyway) ase ircuit See Page V-T- ushing Length Lever Length Lever Type atalog Number Solder Terminals Screw Lugs 0.0 in Spade Terminals PDT OFF D 0.8 (.89) 0.87 (7.) at 799K 799K0 799K PDT OFF F 0.8 (.89) 0.87 (7.) at 799K 799K0 799K PDT OFF F 0.8 (.89) 0.87 (7.) at 7990K 7990K0 7990K Poles and Throw PDT UP ENTER NE OFF DOWN (Keyway) Lever Type Square Square Termination Type Screw Screw atalog Number 780K 780K PDT OFF Square Screw 78K PDT OFF Square Screw 78K PDT OFF Square Screw 78K V-T-8 Volume Vehicle and ommercial ontrols 08000E November 0
3 .7 Technical Data and Specifications Description Specification Ratings See Product Selection tables; Switch ratings at Vac also apply to 8 Vdc ircuits PDT, PDT, PDT; maintained action ontact mechanism One-hole panel mount Flush mount ontact material One-hole panel mount Flush mount Terminal types Mounting means One-hole panel mount Flush mount Dielectric withstand Operating temperature range Dimensions pproximate Dimensions in One-Hole Panel Mount 7990K0 PDT.0 (9.7) Max. 0.0 (0.9).0 (.) rated devices slow-make/slow-break butt contact /D rated devices Quick-make/quick-break wiping contacts Quick-make/quick-break wiping contacts rated devices: Movable silver-plated copper with fine or coin silver contact face button Stationary copper with fine or coin silver contact face button /D rated devices: Movable copper Stationary bronze Movable copper Stationary copper Screw terminals brass rated devices: Threaded bushing 0.8 in (.89 mm) dia., threads/in Keyway 0.08 x 0.0 in (.7 x 0.89 mm) deep, provide anti-rotation feature Hardware supplied hexagon locknut (atalog Number -9) and hex facenut (atalog Number -9-) Furnished unassembled Flush mounting panel tabs 000V rms minimum 0 to 0 F ( 7.8 to. ) (.78).0 (.8) Max. / Thds (.9) 0.00 (7.) 0.90 (7.) (.) x 0.88 (.77) inding Head Screw Volume Vehicle and ommercial ontrols 08000E November 0 V-T-9
4 .7 Toggle Switches pproximate Dimensions in Flush Mount 780K PDT.78 (9.0) 78K PDT.78 (9.0).8 (8.).8 (8.) 0.98 (.9). (.).9 (0.).78 (9.0).9 (0.).89 (7.).97 (7.0).8 (.0) 78K PDT.78 (9.0).8 (8.).8 (8.). (.).890 (8.0).97 (7.0) 0.0 (0.) V-T-0 Volume Vehicle and ommercial ontrols 08000E November 0
5 ccessories.8 Mounting Hardware Product Description One-Hole Mounting Switches ll bushing mounted switches are furnished with two mounting nuts. One nut is mounted behind the panel to prevent the bushing sleeve from being distorted if the front panel is overtightened Product Selection Eaton accepts no responsibility for damage to switches mounted without the backup nuts. Mounting Hardware for One-Hole Mounting Switches Mounting Nuts Size Description Material Note Hardware items are sold for use with Eaton switches only. Minimum ordering quantity on all items is 00. Thickness Dim. in Inside Diameter Dim in OD or Dimension cross Flats Dim. in Dimension cross orners Dim. D in atalog Number /8-7 Hexagon locknut Nickel-plated brass 0. (.8) 0. (.7) 0. (.88) -- /8- right nickel-plated brass -- /- Nickel-plated brass 0.0 (.0) 0.7 (.0) 0. (.9) -- /- Hexagon locknut Zinc-chromate treated 0.07 (.9) 0. (.88) -9 right nickel-plated brass (.98) 0. (.87) 0. (.88) --8 Zinc-chromate treated 0.88 (.7) 0.78 (9.89). (.80) -8- Hexagon facenut Nickel-plated brass (.98) 0. (.7) 0. (.) -9- Semi-lustre nickel-plated brass 9-9- Knurled facenut right nickel-plated brass 0.0 (.8) 0. (.7) -F lack cupric oxide-plated brass -F rass nickel-plated brass 0.09 (.77) 0. (.88) -90 hamfered dress nut right nickel-plated brass 0. (.8) 0. (7.9) 0.87 (7.) -99- Standard knurl nut with shoulder Nickel-plated brass 0.09 (.77) 0.9 (.0) -- Dress nut Satin chrome-plated brass 0. (.8) 0. (.7) -- lack nylon 0.87 (.7) 0.90 (9.9) 0.0 (.) -08- Knurled dress nut hrome-plated brass 0.87 (.7) 0. (7.9) 0.0 (.) -89- /- Hexagon facenut Nickel-plated steel 0.09 (.) 0.97 (.80).078 (7.8) -0 #8-0 Hexagon locknut with facenut Nickel-plated steel 0.00 (.) 0. (.) 0. (.9) -07 Volume Vehicle and ommercial ontrols 08000E November 0 V-T-
6 .8 Toggle Switches ccessories Mounting Washers and Locking Ring Size Description Material Dimensions pproximate Dimensions in Mounting Hardware Note Hardware items are sold for use with Eaton switches only. pproximate Dimensions in Thickness Dim. Inside Diameter Dim OD or Dimension cross Flats Dim. Dimension cross orners Dim. D atalog Number For / bushing Locking ring Zinc-plated steel 0.00 (.0) 0.7 (.07) 0.78 (8.) 9-7- Hexagon Locknuts or Facenuts D Knurled Dress Nut atalog No Knurled Facenut Dress Nut atalog No. -- Knurled Nut with Shoulder Plain Washer hamfered Dress Nut atalog No Internal Tooth Lockwasher 0.0 (.0) 0.0 (.09) 0.09 (.77) 0.00 (.7) Knurled Dress Nut atalog No Locking Ring 0.79 (8.) 0.7 (.07) 0.0 (0.79) 0.0 (0.79) V-T- Volume Vehicle and ommercial ontrols 08000E November 0
7 ccessories.8 Decorator Facenuts Product Selection Type olor atalog Number Knurled facenuts right black -08- right clear eveled facenuts Dimensions pproximate Dimensions in 0. (.88) Dia. Panel Seal 0.8 (.) Dia. Hole Prevents moisture and contaminants from entering panel enclosure ehind panel mounting Stainless-steel cup washer ensures proper seating of silicone rubber seal Seal withstands 0 psi water pressure at. No. - Dimensions - right black right clear atalog Number -08 atalog Number -09 /-Inch Lettering (located on angular surface) Dia Silicone Rubber 0. (.88) Dia (.) Dia. Hole 0.00 (.) upwasher Stainless Steel 0.70 Dia. 0.0 Thickness of brushing seal is reduced to when mounted to panel Replacement Terminal Screws Product Selection Screw Size atalog Number #-0 x /8 in -7 #-0 x / in - #-0 x / in binding head 8-70 #-0 x / in binding head 8- #- x / in binding head 8- #- x / in binding head 8- #- x / in binding head 8-78 #- x / in pan head, brass -89 #- x /8 in binding head 8-9 #8- x / in binding head -8 #8- x / in -9 #8- x / in #8- x /8 in binding head -7 #8- x /8 in binding head -07- #- x 7/ in binding head -08- Toggle oot Prevents moisture and contaminants from entering lever to bushing enclosure Front panel mounting Threaded mounting nut ensures proper assembly of silicon rubber boot rass nut: /- NS- lack color SWRY00 Product Selection Mounting Description Dimensions /- NS (0.80) Ø0. (Ø.) 0.90 (.00) 0.0 (.00) Front panel mounting Molded in brass mounting nut (/- NS-) ensures proper assembly of silicon rubber boot Ø0.0 (Ø8.0) Inner Thread /- NS- olor lack 0.0 (.70) Notes Decorator facenuts for / in bushing switches, /- thread. Hardware items are sold for use with Eaton switches only. atalog Number SWRY00 Volume Vehicle and ommercial ontrols 08000E November 0 V-T-
8 .8 Toggle Switches ccessories Indicating Plates Dimensions pproximate Dimensions in Inches Indicating Plate Dia. OFF Dia. 8 Note White lettering. Product Selection Indicating Plates for /-Inch ushing Mounted Switches Marking Keyway Location Opposite Keyway Keyway Side Material Finish atalog Number Keyway on bottom OFF 0.0 in steel Plain 0- Statuary bronze 0-- urnished nickel in brass lack cupric oxide RD PHO 0.0 in steel Statuary bronze 0--7 urnished nickel 0-- RUN STRT 0.0 in steel urnished nickel 0-- HOT OLD 0-- HI LOW 0-- STOP 0--7 FOR REV 0.0 in steel urnished nickel UTO TEST PUSH STRT RUN TEST LNK LNK 0.0 in steel urnished nickel 0--8 Keyway on side OFF 0.0 in steel urnished nickel 0-- OFF Keyway on top T 0.0 in steel urnished nickel 0-- OFF 0-- SET RUN LNK RESET Keyway on top O I 0.0 in steel urnished nickel 0-- I O 0--9 V-T- Volume Vehicle and ommercial ontrols 08000E November 0
9 Technical Data.9 Single- Pole Two- Pole Four- Pole Terminal Identification When specified on order, switches will have the terminals identified as shown in the illustration at right. Terminal markings will be ink-stamped on the side of the switch case and unused terminal positions will not be identified. ll views are rear of switch with keyway or at down as applicable. Terminal numbers, and and and 8 are considered inboard terminals for single-, two- and four-pole switches respectively. ll others are considered outboard. Three Independent -- ircuit Diagram For switch modified with Three Independent -- special circuit. External jumpers are required. User to connect wiring per instructions given below. -- Special ircuit onnection Points Single-Pole onnect common to terminals onnect circuit to terminals onnect circuit to terminals onnect circuit to terminals Independent PDT No. of Poles ircuit with Lever in UP ENTER (Maintained) ircuit ircuit ircuit ircuit Diagrams Special General Purpose Toggle ircuits ircuit Number Schematic DOWN (Keyway) Toggle ircuit Diagrams ircuit Letter Schematic ircuit Letter Schematic PST PDT PST D PDT E PST Legends Toggle Switch Legend Legend Toggle Switch Type I ircuit J PST K PDT L PST M PST F N 7 0 PDT PDT G PST H PDT P PDT Q 7 ircuit ontact terminal will make contact with switch lever Isolated terminal does not make contact with lever enter terminal and switch lever ulb Momentary contact Denotes mechanical contact portion Notes Poles and may be eliminated for three-pole devices. Poles 0, and may be eliminated for three-pole devices. Dependent lamp. Independent lamp. Two circuit indicates a special type of double-throw switch in which the two circuits being controlled may be independent of each other. For 0 Series, an additional lamp is available. 7 vailable in PDT or PDT. N N NO H G NO Volume Vehicle and ommercial ontrols 08000E November 0 V-T-
DOWN Position. Base Circuit See Page V11-T4-35. (Keyway) 1PST ON NONE OFF A (8.74) (11.91)
. Toggle Switches General Purpose Toggles Rated Product Selection Rated Toggle SwitchesSingle-Pole Rating 6, 5 Vac, 50 Vac 0, 50 Vac / hp, 50 Vac 5, 5 Vac 0, 50 Vac / hp, 50 Vac / hp, 5V Vac 5, 5 Vac 0,
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationToggle Switches. Eaton. The Power of Reliability
Eaton Commercial Controls Division General Purpose C Rated...................... 2.2 General Purpose C/DC Rated................... 2.8 Industrial Purpose C/DC Rated................. 2.12 Special Purpose
More informationTYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
More informationHesitation Switch. Pushbutton Actuator. Product Description
- E Series, Technical Information July 01 Contents Description Page Product Description......... - Stards Certifications............. - Technical Data Toggle es......... - Hesitation es...... -..... -
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationGeneral Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationGeneral Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More information3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationTYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More information1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationRoHS ON - OFF. ON - OFF (momentary ON) ON - OFF. (momentary OFF) ON - ON ON - ON. (momentary 1 side) ON - OFF - ON µ. (momentary 1 side)
900 Metal Lever Switches 6A 50Vac Metal lever switches Ratings up to 0A, 77V ac Single and double pole hoice of circuits including position and momentary 6.mm and solder terminals Guard option 6(4)A 50Vac
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationSERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
More informationGeneral Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
More information.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
More informationonlinecomponents.com
McGILL SWITCHES Contents Introduction......................................................................... 213 McGill Rocker Switches................................................................
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More information3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More information7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
More information.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More information4.2. Definite Purpose Contactors and Starters. Contents A, Two-, Three- and Four-Pole C25. Contactors
.2 Definite Purpose and Starters 5 360, Two-, Three- and Four-Pole 25 5 360, Two-, Three- and Four-Pole 25 Product Description Eaton offers the most comprehensive line of definite purpose contactors in
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationtable of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationToggle Switches, A Series, Part Number Matrix
Toggle Switches, A Series, Part Number Matrix "A" SERIES DESIGN FEATURES Toggle Machined brass, heavy nickel plated. Bushing & Frame Rigid one-piece die cast, copper flashed, heavy nickel plated. Fixed
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationContents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationCOIN CELL PC BATTERY HOLDERS
COIN CELL PC BATTERY HOLDERS 20mm to 30mm Sizes 12mm to 16mm & 1/3 N Sizes SINGLE CELL HOLDER (3-VOLT) DUAL CELL HOLDER (6-VOLT) Single and Dual Printed Circuit Cell Holders for Lithium Coin Cells. Designed
More informationGeneral Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
More informationMomentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More information1.2. Pushbuttons and Indicating Lights. Contents Description Environmentally Sealed Toggle Switches E10E Product Selection
Toggle Switches E0E Contents Description Product Selection Molded-In Screw Terminal............. Econoswitch................................................ Technical Data and Specifications..........
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
More informationC&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationMINIATURE POSITIVE ACTION SWITCHES MIL-S-8834 Miniature Positive Action Switches Solder Lug Terminals
MINIATURE POSITIVE ACTI SWITCHES FEATURES Sealed bushing Current rating versatility 1 and 2 pole circuitry Non-teasible mechanism for all but center "" circuits Dry circuit (logic level loads) to power
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationSP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
More informationST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINIATURE TOGGLE SWITCHES K FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
More informationMS-Series. Circuit Breaker
MS-Series Circuit Breaker Carling Technologies MS-Series Sealed Toggle Circuit Breaker was designed and tested to operate flawlessly in the harshest of environments. Ideally suited for COTS (commercial
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationAV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
More informationSnap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
More information600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6
More informationButt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationSPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More information600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
More informationT Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More information9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More informationGeneral Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
More informationFuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
More informationPresentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationDETAIL SPECIFICATION SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES
INCH-POUND MIL-DTL-83731/1B July 010 SUPERSEDING MIL-S-83731/1A 0 March 1987 DETAIL SPECIFICATI SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES Inactive for
More informationSingle Pole Circuit Protectors 55. Multi-Pole Circuit Protectors 56. Configurations 58. Operating Characteristics 59.
Single Pole Circuit Protectors 55 Multi-Pole Circuit Protectors 56 Configurations 58 Operating Characteristics 59 Delay Curves 60 Specifications 61 Decision Tables 62 SINGLE POLE CIRCUIT PROTECTORS The
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More information2.7. Limit Switches. Contents Description. E50 Heavy-Duty Factory Sealed 6P+ Switches. E50 Heavy-Duty Factory Sealed 6P+ Switches
ourtesy of M/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com.7 E50 Heavy-Duty Factory Sealed 6P+ Switches E50 Heavy-Duty Factory Sealed 6P+ Switches
More information5000 SERIES - MINIATURE TOGGLE SWITCHES
000 SERES - MNATURE TOGGLE SWTCHES A SPECFCATONS SUBJECT TO CHANGE WTHOUT NOTCE FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, PDT & PDT models with numerous options. Numerous configurations
More informationSeries AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
More informationTable of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
More informationSeries 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
More information5.11. Metering Products. Contents Description Systems for Residential and Commercial
3MM, 37MM, 3SS and 37SS Main Tenant ircuit reakers V2/EHD2100 ontents Description Systems for Residential and ommercial pplications............................ Meter Packs.............................
More information