Plastic Ceiling Receptacle Lampholders
|
|
- Amos Edwards
- 5 years ago
- Views:
Transcription
1 R C US Plastic Ceiling Receptacle Medium Base 250W 250V Plastic Ceiling Receptacle R " (115.8mm) 1.59" (40.4mm) S1174W 4.63" (117.6mm) 1.52" (38.6mm) Molded of high-temperature, thermoset plastic to reduce breakage. Mounts on 4" (101.6mm) outlet boxes with breakout for 3.25" (82.55mm) box mounting. Leads are 6" (152.4mm) 105 C insulated stranded #16, stripped 0.75" (19.05mm). Pull chain devices include ball chain, 3' (0.91m) of cord, connector and endbell. Top wire versions have terminal screws backed out ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Sockets available in two piece version to permit interior replacement, dust ring protects against plaster and dirt. Shade grooves provided on two piece units. 2.16" (54.9mm) Medium Base 1.63" (41.4mm) W V Description Terminals Switch Color Catalog No Two Piece Push Wire/Top Wire Pull Chain White S759W-CD Two Piece 6" (152.4mm) Leads Pull Chain White S788W S788W Two Piece w/ Push Wire/Top Wire Pull Chain White S860W 15A 125V/AC 2P2W Outlet 4.63" (117.6mm) 2.16" (54.9mm) Two Piece w/ Push Wire/Top Wire Pull Chain White S865W 15A 125V/AC 2P3W Outlet One Piece 4 Top Wire Screws Keyless White S1174W 1.63" (41.4mm) One Piece 6" (152.4mm) Leads Keyless White S1174-6W Two Piece Push Wire/Top Wire Keyless White S768W Two Piece 6" (152.4mm) Leads Keyless White S768-6W S865W cul Listed, (file no. E7430), UL496 requirements. CSA Certified, (file no ( )). Meet CSA C22.2 no Temperature :
2 Porcelain Ceiling Receptacle Medium Base 660W 125V Porcelain Ceiling Receptacle High-strength insulator porcelain. Mounts on 4" (101.6mm) outlet boxes with breakout for 3.25" (82.55mm) box mounting. Pull chain socket interiors are removable. Pull chain devices include ball chain, 3' (0.91m) of cord, connector and end bell. Top wire versions have terminal screws backed out ready for wiring without removing the interior. Medium Base Sockets available in two piece version to permit interior replacement, dust ring protects against plaster and dirt. Shade grooves provided on two piece version. W V Description Terminals Switch Color Catalog No One Piece 4 Screws Keyless White 604 with feed Top Wire through Two Piece 4 Screws Pull Chain White 659 with feed Top Wire through Two Piece w/ 2 Screws Pull Chain White A 125V/AC Top Wire 2P2W Outlet Two Piece w/ 2 Screws Pull Chain White A 125V/AC Top Wire 2P3W Outlet 4.50" (114.3mm) 1.70" (43.2mm) " (114.3mm) 1.63" (40.4mm) " (114.3mm) 1.63" (40.4mm) " (38.1mm) 2.14" (54.4mm) 2.14" (54.4mm) R " (114.3mm) 2.14" (54.4mm) 1.63" (40.4mm) 667 UL Listed, (file no. E7430) UL 496 Meet CSA C22.2 no. 43 Temperature :
3 Metal Shell Socket Interiors 250W 250V Electrolier Medium Base 250W 250V Interiors for Medium Base Metal Shell 1.87" (47.5mm) Molded of heat and impact-resistant phenolic. R " (27.7mm) 962 Interiors for Medium Base Metal Shell W V Fits Catalog No. Switch Finish Catalog No Pull Chain Aluminum Brass Dipped Key Aluminum Brass Dipped " (35.6mm) Electrolier Medium Base Metal Shell 2.35" (59.7mm) Caps threaded 0.125" (3.18mm) 27 I.P.S. fit standard lamp stems. Set screw prevents rotation of socket. Two Circuit (3-way) sockets operate dual filament lamps on sequence of low, medium, high, off. 1.25" (31.8mm) 940ABD 1.40" (35.6mm) 1.25" (31.8mm) 975ABD 2.00" (50.8mm) Electrolier Medium Base Metal Shell W V Description Cap Switch Finish Catalog No One Circuit 0.125" Turn Knob Aluminum Brass Dipped 917ABD (3.18mm) Two Circuit 0.125" Turn Knob Aluminum Brass Dipped 925ABD (3-Way) (3.18mm) One Circuit 0.125" Pull Chain Aluminum Brass Dipped 980ABD (3.18mm) One Circuit 0.125" Push Thru Aluminum Brass Dipped 940ABD (3.18mm) Keyless 0.125" Keyless Aluminum Brass Dipped 975ABD (3.18mm) UL Listed, file no. E7430, UL 496 except 962, 932: UL Recognized, file no. E7430. Temperature :
4 Metal Shell Socket Interiors 250W 250V with Extension Cords Interiors for Electrolier Medium Base Metal Shell Interiors are UL component recognized. Molded of heat and impact-resistant urea. Interiors for Medium Base Electrolier Metal Shell W V Fits Catalog No. Switch Catalog No Pull Chain , 485 Push Thru Turn Knob " (43.4mm) 1.09" (27.7mm) 2982 R-4 Electrolier Metal Shell with Extension Cords Caps threaded 0.125" (3.18mm) 27 I.P.S. 1.74" (44.2mm) Electrolier Metal Shell with Extension Cords W V Description Cord Type Cord Length Cord Color Catalog No Push Socket 18/2 SPT-1 9' (2.74m) Brown 485-9* with Polarized Plug 12' (3.66m) Brown * *Not UL 496 or NOM certified..78" (19.8mm) 1.09" (27.7mm) " (45.2mm) 1.09" (27.7mm) UL Recognized, file E7430, UL 496 except as noted. CSA Certified, file 1739 ( ), Meet CSA C22.2 no. 43, except as noted. Temperature :
5 1.12" (28.4mm) Fluorescent Fluorescent Recessed Double Contact Slimline 660W 600V 660W 1000V R " (15.0mm) 0.59" (15.0mm) 0.05" (1.3mm) 0.59" (15.0mm) 1.44" (36.6mm) " (28.4mm) 1.45" (36.8mm) " (28.4mm) 1.45" (36.8mm) " Molded of white thermoset plastic for neat (29.7mm) appearance and durability. 2.31" For replacement use in fluorescent lighting (58.7mm) fixtures as well as enclosed outdoor signs. Recessed double-contact (2500, 2501) lampholders can be used for flush or surface mounting. 1.17" (29.7mm) 2.33" (59.2mm) 2.33" (59.2mm) 1.17" (29.7mm) Recessed Double Contact Plunger lampholders feature non-sticking, spring-loaded plunger to hold lamp securely. Captive pal nut for easy mounting. Push-in wire terminals feature release slots. W V Description Cap Switch Color Catalog No Plunger Push Wire Screw White 2501W Stationary Push Wire Screw White 2500W Slimline W V Description Cap Switch Color Catalog No Plunger Push Wire Screw White 2504W* Stationary Push Wire Screw White 2503W* Plunger Push Wire Slide-On White 2507W Stationary Push Wire Slide-On White 2506W *Not CSA or NOM certified. 1.13" (28.7mm) Panel Cutouts 2500, 2501, 2503, , 2506 UL Listed, UL 1570 requirements CSA Certified, Meet CSA requirements Temperature : 1.73" (43.9mm) 1.30" (33.0mm) 1.73" (43.9mm) 1.30" (33.0mm) 1.37" (34.8mm) " (28.7mm) 1.37" (34.8mm) " (1.3mm) 0.05" (1.3mm) " (4.76mm) Diam. Hole or Wide Slot 1.343" (34.11mm) 1.130" (28.70mm) 1.130" (28.70mm) 1.130" (28.70mm) 1.130" (28.70mm) Slide-on Slot for 20 Gauge Panel
6 Fluorescent and Starters Medium Bi-Pin 660W 600V Fluorescent Starters Fluorescent Molded of white thermoset plastic for neat appearance and durability. For replacement use in fluorescent lighting fixtures. Medium Bi-Pin Use for flush or surface mounting. Captive pal nut for easy mounting. Push-in wire terminals feature release slots. W V Description Terminals Mounting Color Catalog No Standard Push Wire Slide-On & Screw White 2509W Short Push Wire Slide-On & Screw White 2510W Standard Screw Terminals Screw White 924W Panel Cutouts 2509, " (4.77mm) 0.156" (3.96mm) Diam. Hole or Wide Slot Fluorescent Starters Condenser Type 0.344" (8.74mm) 1.016" (25.81mm) All-purpose two-terminal standard starter accurately timed to combine starts with long bulb life " (4.77mm) 0.156" (3.96mm) Diam. Hole or Wide Slot 0.344" (8.74mm) Slide on Slot for 20 Gauge Panel 1.016" (25.81mm) For use where lights are turned on more than five times daily. Also in devices where bulb life expectancy is two years or less. 2.03" (51.6mm) 1.17" (29.7mm) 0.88" (22.4mm) 1.26" (32.0mm) 2.37" (60.2mm) 1.00" (25.4mm) 1.35" (34.3mm) " (25.4mm) 1.25" (31.8mm) " (36.6mm) " (9.4mm) 0.37" 1.67" (9.4mm) (42.4mm) 1.18" (30.0mm) 0.62" (15.7mm) R-6 Fluorescent Starters Condenser Type W Lamp Size Catalog No " (45.72cm) -15W or 24" (60.96cm)-20W 45FS " (91.44cm) -30W or 48" (121.92cm)-40W 45FS4 45FS2 UL Listed, Meet UL requirements CSA Certified, Meet CSA C22.2 no. 43 Temperature :
7 R " (41.4mm) 1.36" (34.5mm) " (40.6mm) " (44.5mm) 1.50" (38.1mm) 1.47" (37.3mm) 1.32" (33.5mm) Pigtail Pigtail For use in electrical equipment, harnesses, light strings and related applications. Wire leads are 5" (127mm) of color-coded stranded wire, stripped 1" (25.4mm) for easy connection. Rubber sockets have an extended lip to seal against bulb. Medium Base Medium and Miniature Base 75W 125V 660W 600V Metal shell interiors are aluminum, 145 nickel-plated copper. 124 weatherproof socket has sealed leads where they enter husk. W V Description Wire Size Catalog No Rubber #14 145* Rubber # Phenolic # *cul Listed CSA certified 0.68" (17.3mm) 0.98" (24.9mm) Miniature Base W V Description Wire Size Catalog No Phenolic # Not NOM certified 0.57" (14.5mm) 306 UL Listed, file E7430, UL 496 Meet CSA C22.2 no. 43 Temperature :
8 Sign and Scoreboard Lighting Attachon, Medium Base 200W 250V Sign and Scoreboard 1.60" (40.6mm) Insulation displacement terminals for stranded wire. Lay in wire channels, 1/4 turn twist top speeds installation. One piece terminals and contacts. No rivets or eyelets to loosen due to heat. Sockets are molded of heat-resistant phenolic. 732 is weatherproof suitable for outdoor use. Snap-in or screw-in panel mounting options. Keyed spring washer prevents rotation of socket after installation. 2.53" (64.3mm) " (38.9mm) 1.89" (48.0mm) R-8 Medium Base Attachon W V Description Wire Range Mounting Catalog No Phenolic #14 to #12 Hook " (40.6mm) Phenolic #14 to #12 No-Hook Phenolic #14 to #12 Snap-in Phenolic #18 to #12 Snap-in Phenolic #14 to #12 Screws " (4.6mm) 1.89" (48.0mm) Medium Base Attachon with Guard W V Description Wire Range Mounting Catalog No Phenolic Socket (732) #18 to #12 Hook 1466Y* Yellow Guard *Not CSA certified 0.11" (2.8mm) 1.89" (48.0mm) 1.35" (34.31mm) " (33.8mm) 0.20" (5.1mm) 1.79" (45.5mm) Panel Cutouts " (8.64mm) 2.13" (54.10mm) 1.53" (38.86mm) 1.41" (35.81mm) " (4.83mm) 1.38" (34.80mm) 1.38" (34.80mm) Diam. 1.8" (45.97mm) 0.188" (4.83mm) Diam. 0.11" (2.8mm) 1.89" (48.0mm) 1.34" (34.0mm) " (46.0mm) 1.33" (33.8mm) 1.34" (34.0mm) " (3.3mm) 1.79" (45.5mm) UL Listed, file E7430, UL 496 requirements CSA Certified, file 1739 ( ), Meet CSA C22.2 no. 43 Temperature :
9 1.13" (28.7mm) Sign and Scoreboard Lighting Sign and Scoreboard Attachon, Intermediate and Candelabra Base 75W 125V 75W 250V R " (38.9mm) 0.98" (24.9mm) " (28.7mm) 0.98" (24.9mm) " (28.7mm) 0.86" (21.8mm) " (22.6mm) 0.13" (3.3mm) 2.06" (52.3mm) 0.13" (3.3mm) 1.53" (38.9mm) 0.16" (4.1mm) 1.53" (38.9mm) 0.12" (3.0mm) 1.34" (34.0mm) Insulation displacement terminals for stranded wire. Lay in wire channels, 1/4 turn twist top speeds installation. One piece terminals and contacts. No rivets or eyelets to loosen due to heat. Intermediate Base Attachon Sockets are molded of heat-resistant phenolic. Snap-in or screw-in panel mounting options. Keyed spring washer prevents rotation of socket after installation. W V Description Wire Range Mounting Catalog No Phenolic #18 to #16 Hook 731* Phenolic #18 to #16 No Hook Phenolic #18 to #16 Spring Washer Phenolic #18 to #16 Snap-in 731-3* *CSA certified, file 1739 Candelabra Base Attachon W V Description Wire Range Mounting Catalog No Phenolic #20 to #18 No Hook 974** Phenolic #20 to #18 Spring Washer Panel Cutouts 731-2, " (22.86mm) Diam " (10.79mm) 1.03" (26.03mm) 0.82" (20.83mm) **CSA certified, file E21433 Not CSA 0.063" (1.6mm) 0.125" (3.17mm) UL Listed, file E20152 or 26358, UL 496 Meet CSA C22.2 no. 43 Temperature : 0.80" (20.3mm) 974-2
10 Sign, Heater and Cleat Socket 75W 125V Sign Sockets Porcelain Base, Thermoset Ring High-strength insulator porcelain. For use in signs, fixtures, decorative lighting and similar applications. Sign Sockets Porcelain W V Description Base Switch Color Catalog No piece with Medium Keyless White 610* screw terminals piece with 9" (228.6mm) Medium Keyless White 609* wire leads R-10 Heater Socket Porcelain For use with heater elements. 0.43" (10.9mm) 1.78" (45.2mm) Heater Socket Porcelain W V Description Base Switch Color Catalog No piece with Edison Keyless White 602* screw terminals 1.81" (46.0mm) " (54.6mm) Cleat Sockets Thermoset For use with stage lighting and similar applications. Cleat Sockets Thermoset W V Description Base Switch Color Catalog No Front wire Medium Keyless White S752W* screw terminals Front wire Candelabra Keyless White 304 screw terminals Front wire Miniature Keyless White 303 screw terminals *UL Listed, file E7430; CSA file 1739 ( ) UL file E26358; CSA file ( ) 2.44" (62.0 mm) 1.44" (36.6mm) 1.60" (40.6mm) " (26.4mm) (50.0 mm) 1.31" (33.3 mm) 0.73" (18.5mm) 1.09" (27.7mm) UL Listed, file E7430 or 26358, UL 496 CSA Certified, Meet CSA C22.2 no. 43 Temperature :
11 1.27" (32.3mm) Bottom Turn Knob Bottom Turn Knob Molded of high-temperature thermoset plastic. Screw terminals are backed out ready for wiring. Medium Base Phenolic Body R " (17.8mm) 0.31" (7.9mm) " (82.0mm) Nipple Bracket Finish W V Description Length Length Nipple & Nuts Catalog No " (9.53mm) 0.375" 0.69" Nickel /8-27 Nipple (9.53mm) (17.46mm) with Removable Knob Panel Cutout Bottom Turn Knob 0.406" (10.31mm) Diam " (8.51mm) Panel Thickness 0.125" (3.17mm) Maximum 1.38" (35.1mm) 1.25" (31.8mm) 0.44 (11.2mm) " (48.3mm) Incandescent Incandescent Screw terminals are backed out ready for wiring. Interiors have removable turn knobs. Incandescent Medium Base Fixture Sockets 250W 250V Hickeys and nipples are threaded for mounting on standard fixture, lamp stems or brackets. Bracket Overall W V Description Switch Height Height Catalog No Porcelain Keyless 0.44" 1.88" 969* Screw Terminals (11.11mm) (47.8mm) Phenolic Keyless 0.44" 1.88" 968* Screw Terminals (11.11mm) (47.8mm) UL Listed, file E7430, UL 496 requirements CSA Certified, file 1739 ( ), Meet CSA C22.2 no. 43 Temperature : - 40 C to 65 C " (27.7mm) " (48.3mm) 2.22" (56.4mm) Electrolier Medium Base Sockets 0.13" (3.18mm) IPS Bracket Screw Terminals Bracket Overall W V Description Switch Height Height Catalog No One Circuit Turn Knob 0.50" 2.062" 918* (12.7mm) (52.4mm) Two Circuit (3-Way) Turn Knob 0.50" 2.25" 926 (12.7mm) (57.2mm) *Not NOM certified Not UL
12 Portable Lighting Trouble Lamps 13A 125V Yellow Trouble Lamps Heavy duty thermoplastic jacketed cord for rough surface. Plugs and handles with built-in finger grips for easy installing. Plastic guard rated to 75W. 18 ga. with Plastic Guard and 15A 125V 2P3W Single Receptacle Lampholder Cord Type/ Size Plug NEMA Switch Length Catalog No. 13A 125V/AC SJT W-A 15A 125V/AC 5-15P Push 25' (7.62m) * 18/2 50' (15.24m) * R-12 Trouble Lamp Kit without Cord Lampholder A V/AC Switch Outlet Color Catalog No Push Yellow Push 15A 125V/AC Yellow Temperature : -20 C to 60 C
13 Trouble Lamp Accessories Handles, Interiors Reflector Guards Lamp Guards 1.69" (42.9mm) Replacement Trouble Lamp Handle R " (60.2mm) " (27.7mm) 1.05" (26.7mm) " (165.1mm) 1.72" (43.7mm) Replacement Trouble Lamp Handle with Interior A V/AC Switch Outlet Catalog No Push Two 15A 125V 2P2W 1071 Interiors One piece side outlet contacts permanently fastened. Push Switch and Outlets A V/AC Switch Outlet Fits Catalog No Push Two 15A 125V 2P2W Push Two 15A 125V 2P2W * *NOM certified 8.0" (203.2mm) 6.25" (158.8mm) Reflector Guards Fits all trouble lamp handles is high-strength, impact-resistant thermoplastic. 4.34" (110.2mm) 1467 Reflector Guards Bulb Description Catalog No. 75W Max. Yellow Vinyl W Max. Steel " (93.0mm) " (98.3mm) 8.25" (209.6mm) 6.25" (158.8mm) 5.63" (143.0mm) Lamp Guards 1.25" (31.8mm) clamp fits metal shell lampholders. 1.50" (38.1mm) clamp fits ceiling lampholders, pigtail lampholders, sign and scoreboard Attachon lampholders. Lamp Guards 1465 is high strength, impact-resistant thermoplastic. Easy-open guard permits relamping without removing guard. Bulb Description Collar Catalog No. 100W Max. Metal 1.25" (31.8mm) 469A 100W Max. Metal 1.50" (38.1mm) 469B 200W Max. Yellow Plastic Adjustable 1465Y 469
14 Utility Clamp Lamps Utility Sets Closet Light Utility Clamp Lamp and Accessories Removable threaded reflector. adjustable, rotate 360 and will adjust up to 180 angle. 7.5" (190.5mm) Utility Sets Medium Base Description Cord Type/Size Color Length Lampholder Catalog No. Clamp On SPT-2 18/2 Brown 6' (1.83m) Phenolic 660W 484 Push-Thru Clamp On with 8.5" SPT-2 18/2 Brown 6' (1.83m) Phenolic 660W 4484 (215.9mm) Reflector Push-Thru 7.37" (187.2mm) " (215.9mm) 3.18" (80.8mm) R-14 Automatic Closet Light Automatic switch activates by opening and closing of hinged or sliding door. Automatic Closet Light Description Cord Type Size Color Length Catalog No. Automatic Closet Light SPT-1 18/2 Ivory 9' (2.74m) C " (72.9mm) 2.03" (50.8mm) 1.30" (33.0mm) C " (36.1mm) Temperature :
15 Lampholder Adapters 660W 125V Polarized Medium Base Socket Adapters Outlets on adapters are 2-wire polarized. Pull chain for 718 controls lampholder. Side outlets are always on. R Polarized Medium Base Socket Adapters W V Socket to Switch Color Catalog No One Socket Pull Chain Brown 718B Max. & Two Outlets Ivory 718V Total Lampholder (Outlets) One Socket Keyless Brown 715B Max. & Two Outlets Ivory 715V Total Lampholder (Outlets) Outlet Keyless Brown 758B Outlet Keyless Brown Two Sockets Keyless Brown 700B Ivory 700V 758 Polarized Medium Base Outlet Adapters W V/AC Outlet to Switch Color Catalog No Socket Keyless Brown 738B Ivory 738V White 738W UL Listed, (file no ). Meet all UL 496 & 498 CSA certified, (file no ( )), for 700: (file no ( )). Meet CSA C22.2 no. 42 & 43 Temperature : Polarized Medium Base Adapters W V/AC Description Switch Color Catalog No Medium Base Keyless Brown 362* to Mogul *Not UL Listed Not CSA Not NOM
16 Lampholder Adapters Socket Reducers Socket Extensions 75W 125V Socket Reducers Mogul reducer has porcelain body, balance of reducer bodies are molded of heat and impact-resistant material. Socket Reducers W V Description Switch Color Catalog No Mogul to Medium Keyless Ivory Medium to Candelabra Keyless Brown Medium to Intermediate Keyless Brown 322* 332 R Socket Extensions One piece screwshells with porcelain bases. Socket Extensions W V/AC Description Base Extends Catalog No Phenolic Medium 1.375" (34.9mm) 1054 *Not UL Listed, Not CSA certified Not NOM Listed 1.50" (38.1mm) " (59.9mm) UL Listed, file E15055, CSA certified, file 1739 ( ), Meet all UL 496 Meet CSA C22.2 no. 43 NOM certified Temperature :
17 Lampholder Accessories Socket Buttons Ball and Chain Accessories R T-125 Socket Buttons Flasher buttons are medium-based and offer choices of flash frequencies. Socket Buttons W V Description Base Flashes / Minute Catalog No Superior Flashers Medium 65 to Gacor Twinkle Medium 50 to T Gacor Beacon Medium 28 to B Ball and Chain Accessories Description Finish Catalog No. #6, 0.125" (3.18mm) diameter Ball Chain 3' (0.91m) Brass 331BB with End Bell and Connector #6, 0.125" (3.18mm) diameter Ball Chain 3' (0.91m) Nickel 331NP with End Bell and Connector Ball Chain 100' (30.48m) Spool Brass Connector Brass 307 End Bell Nickel 366 Pull Cord 3' (0.91m) with End Bell and Connector Nickel
Metal Shell Lampholders. FEATURES Molded of heat and impact-resistant urea.
Metal Shell Lampholders Socket Interiors Electrolier Medium Base Lampholders R-3 (27.7mm) 962 1.40" (35.6mm) 940 1.40" (35.6mm) 975 1.87" (47.5mm) 2.35" (59.7mm) 2.0" (50.8mm) Interiors for Medium Base
More informationElectrical Accessories
288 282 272 Looking for the classic porcelain lampholder? A hard-to-find household adapter? Or a wide range of replacement appliance switches? You ll find them in our accessory line along with quality
More informationL1 FLUORESCENT LAMPHOLDERS INCANDESCENT LAMPHOLDERS
Lampholders Leviton offers a complete selection of outlet box, incandescent, fluorescent and specialty lampholders, in various ratings and materials. The following pages offer a variety of types and styles.
More informationOther Wiring Products
Section Z Other Wiring Products Index Product Page Adapters, Starters and Receptacle Circuit Tester Adapters and Fluorescent Starters............................. Z-2 Lockout Devices and Circuit Tester.............................
More informationLinear Fluorescent Lampholders. Compact Fluorescent Lampholders (CFL s)
CATALOG LINE CARD Linear Fluorescent Lampholders Miniature Bi-Pin Low and tall profile, snap-in/slide-on for T-5, shunted and non-shunted T-8 to T-5 adapter Butt-on for T-5 Medium Bi-Pin Internal shunt
More informationtable of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
More informationCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800)
A Century of Quality iring Devices for Original Equipment Manufacturers Leviton has been a leader in the electrical industry since 1906. Behind our success is a consistent commitment to customers, innovative
More informationINCANDESCENT LAMPHOLDERS SECTION H INCANDESCENT LAMPHOLDERS
SETION H LMPHOLDERS andelabra ase Lampholders IS05, IS05-751 IS104, IS104-PS IS101 IS105, IS106, IS107 NLS Intermediate ase Lampholders IS115 Medium ase Lampholders IS201, IS275 IS211, IS211T, IS2209,
More informationWeather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
More informationInnovation. Quality. Service
Lampholder Catalog About us For over 25 years, McWong International, Inc. has been bridging the best of East and West in order to achieve for our valued customers an unparalleled mix of innovation, quality,
More informationStraight Blade Plugs and Connectors
Straight Blade I Hospital rade I-1 I-4 Industrial Specification rade I-5 I-9 Industrial Specification rade Flanged Inlets and Outlets I-10 Insulated Straight Blade I-11 atertight Straight Blade I-12 atertight
More informationtable of contents Lampholders for Innovative Light Sources SECTION C CS ECTION
table of contents Lampholders for Innovative Light Sources Advances in lighting technology provide lamps with exceptional brightness, color rendition, energy efficiency and compact size. Leviton meets
More informationHALOGEN LAMPHOLDERS SECTION G HALOGEN LAMPHOLDERS G2 - G8. Multi-base Bi-Pin Halogen Lampholders. BA15d/E11 Lampholders G9 - G10
SETION G LAMPHOLDERS Multi-base Bi-Pin Halogen Lampholders BA15d/E11 Lampholders Double Ended R7s Halogen Lampholders GU-10, GZ-10 Base Lampholders Halogen Socket Accessories G2 - G8 G8 G9 - G10 G11 G11
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationNon-illuminated Push Buttons
Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More informationSUPER DUTY THE AFFORDABLE SOLUTION 8685 Station Street, P.O. Box 90, Mentor, OH 44061-0090 USA P: +1-440-255-9333 F: +1-440-255-6427 E: solutions@lintern.com www.lintern.com SUPER DUTY CONDENSER TOTAL
More informationWallplates & Weather Protective Covers
SECTION C Wallplates & Weather Protective Covers Our broad offering of wallplates are the final touch for any application and are available in standard size, mid-size and oversize. Choose from a variety
More informationCompact Fluorescent Lampholders
table of contents Compact Fluorescent Lampholders Introduction................................................... B2 Smart CFL Color-Coding Chart.................................... B3 G24q/GX24q Base.................................
More informationFIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)
FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set
More information1400 Architura RGB Outdoor Linear LED
1400 Architura RGB Outdoor Linear LED Features LEDs deliver even diffused light without LED images DMX input color control Life >50,000 hours (LM79) Construction Extruded aluminum housing. Diecast endcaps.
More informationWOODS WIRE WOODS WIRE
INTERIOR HOUSEHOLD EXTENSION Power Tap Extension Cords 3-Outlet solid molded power taps 3-outlet compact design grounded 3-conductor molded plug wire gauge: 16-3 wire type: SPT-3 rated: 13A/125V CSA approved
More informationCovers for Cast Iron or Aluminum Device Boxes
Single Gang Blank cover for enclosing splices and taps where device not used. Sheet DS100 Flush Sheet steel DSS100 For GFI receptacles. Sheet steel DS23 GFI For square handle general use snap or toggle
More informationCat Description Finish. 1 Hole Plug Gray /4 Hole Plug White /4 Hole Plug Bronze /4 Hole Plug Gray 10 30
Lampholder & Bar Coded For 75 Thru 150 Watt PAR 38 Lamps Extra Long Wire Leads for Easy Hook-Up Locking Swivel Knuckle Assures Positive Lamp Positioning and Provides Pinpoint Directional Aiming Lampholder
More informationCLAMP LAMPS. Spring Clamp. Anodized Aluminum Reflectors. Anodized Aluminum Reflectors. Power ON/OFF Switch in the Socket
CLAMP LAMPS Anodized Aluminum Reflectors Power ON/OFF Switch in the Socket Uses Type A Bulb (Bulb Not Included) Works with CFL, LED & Incandescent Bulbs 6ft 18/2 SPT-2 Cord Anodized Aluminum Reflectors
More informationElectrical Accessories
INDEX Taps and Adapters... 101 Night/Guide Lights... 103 Utility and Battery-Operated Lights... 104 Accessories... 104 99 Electrical Accessories Leviton Electrical Accessories for the home include taps
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationOne Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
More informationcircuit protection & wiring accessories
circuit protection & wiring accessories J J1 circuit breakers Circuit breakers and fuses are a cost-effective solution to protecting wiring, equipment and subsystems. While fuses are a one-time, disposable
More informationSwitches & Motor Controls
Toggle Switches... A-2 Traditional Switches... A-2 CO/ALR Switches... A-14 Lev-Lok Modular Switches... A-15 Decora Switches... A-16 Appliance Switches... A-23 Anywhere RF Remote Switches... A-25 Manual
More informationPLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
DBR 30, 60, 100 and 150 Amp Series Receptacles Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More informationCode Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
More information100ft Temporary Construction String Light - Ten LED Work Lamps Watt LED Stringer - 12/3 SJTW
100ft Temporary Construction String Light - Ten LED Work Lamps - 100 Watt LED Stringer - 12/3 SJTW Part #: WAL-SL-10-LED-12.3 Page: 1 The Larson Electronics WAL-SL-10-LED-12.3 Work Area Lighting LED String
More informationI With Reflector 104-R 118-R. With Switch with Receptacle
Industrial Duty Handlamps Lamp Guards for 7 and 9 Series Handlamps Closed End Wire Guards No Reflector 104 118 104-I With Reflector 104-R 118-R 118-I Open End Wire Guards No Reflector 107 107-I 119 With
More informationStraight Blade Receptacles
Straight Blade A Hospital rade Straight Blade A-1, A-2 Hospital rade A-3 Hospital rade Tamper Resistant Duplex Safety A-4 Industrial Specification rade Straight Blade A-5 A-11 Commercial Specification
More informationApplications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
More informationAreamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
More informationPortable Lighting.
A Portable Lighting www.woodhead.com Handlamps Haztex Hazardous Location Fluorescent 26W Lights are designed to stringent specifications of NEC Article 500 and are agency listed for safety in classified
More informationCOMPACT BUSWAY 40 & 60 AMP HOUSING
40 & 60 AMP HOUSING B40 & HOUSING Each Track Busway housing section consists of an extruded aluminum housing with an insulated strip containing copper conductors mounted on the top interior wall. The aluminum
More informationINSULGRIP Plugs and Connectors
INSULRIP Plugs and Connectors INSULRIP Plugs and Connectors Technical Information HBL5266C HBL5269C INSULRIP Plugs and Connectors Specifications Plug Part Description Typical Specification Catalog No.
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationPlugs and Receptacles: Hazardous Location
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable
More informationStraight Blade Plugs and Connectors
SECTION Straight Blade Plugs and Connectors INDE Industrial rade Plugs & Connectors Overview................................2 15A 125V & 250V Hospital rade..........................3 Industrial rade.........................3
More informationJuno Trac-Master Trac Lighting Systems. Comprehensive line and low voltage track systems
Juno Trac-Master Trac Lighting Systems Comprehensive line and low voltage track systems Juno Trac-Master System Safe and simple installation is what you can expect from Juno one-circuit and two-circuit
More informationArrow Hart. environment devices. Watertight, severe duty and corrosion resistant devices for harsh industrial environments
Eaton's Arrow Hart Complex environment devices Complex environment devices, severe duty and corrosion resistant devices for harsh industrial environments Arrow Hart NEMA and Non-NEMA quick reference guide
More informationPLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations where receptacles are used with stationary or portable
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More information50ft Temporary Construction String Light - 5 LED Work Lamps - 50 Watt LED Stringer - 12/3 STJW
50ft Temporary Construction String Light - 5 LED Work Lamps - 50 Watt LED Stringer - 12/3 STJW Part #: WAL-SL-5-LED-12.3 Page: 1 The Larson Electronics WAL-SL-5-LED-12.3 Work Area Lighting LED String Light
More informationMipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
More informationOne Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
More informationStandard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
More information500 Ocean Electrical Device Submittals
500 Ocean Electrical Device Submittals X 02/24/16 JDF Submittal #095 - DIV 16 - IMC - Electrical Devices RESUBMITTAL - #16410 Straight Blade Receptacles Project Name: Project Number: Catalog Number: Prepared
More informationSPECIFICATION HIGH IMPACT RESISTANT THERMOPLASTIC/NYLON
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 2094 Gfci Rec 20a120v20a Pass & Seymour/Legrand Catalog Number 2094 Manufacturer Pass & Seymour/Legrand Description Receptacle,
More informationTemporary Jobsite LED Light Fixture - 60 Watt LED - 14/3 SJT - Daisy Chain - Hook Mount
Temporary Jobsite LED Light Fixture - 60 Watt LED - 14/3 SJT - Daisy Chain - Hook Mount Part #: WAL-TJL-150W-LED-CPR-E2E-14.3-50.2C Page: 1 Made in the USA The Larson Electronics WAL-TJL-150W-LED-CPR-E2E-14.3-50.2C
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationCONTENTS. This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark:
This Product is Listed by UNDERWRITERS LABORATORIES INC. and Bears the Mark: This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark: SLATER SCD Installation Instructions For Self-Contained
More informationHeight Finish Pole Options. Mounting Lamping Finish Voltage. Metal Halide. Single. H w H070 70w H w H w 15 1 /4" (387mm) 15 3 /4"
Vektor Project: Series Reflector Mounting Lamping Finish Voltage VE Vektor R Type II Aluminum Reflector Single R5 Type V Aluminum Reflector Double M Single ' Arm M Double ' Arm W Wall T Single Fitter Type:
More informationDBR Receptacle Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. EBR Receptacle Class
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationAreamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
More informationStraight Blade Plugs and Connectors
Plugs and Connectors Industrial, Commercial and Residential rade Leviton offers a complete line of 2-, 3-, and 4-wire straight blade plugs ands connectors that resist impact, corrosion and chemicals. The
More informationP hoenix Products introduced loading dock lighting to the
INDEX PAGE Standard Modular docklite 2-5 Accessories 6 Operating Cost Comparison 7 Impact-Resistant docklite 8 Wet-Location docklite 9 Explosion-Proof docklite 10 Dimensions 11-12 Overhead Pull-down docklite
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
More informationDuraPro Hazardous Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
More informationPowertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
More informationExplosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm
Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm Part #: EPL-DL-70LED-24 Page: 1 Made in the USA The EPL-DL-70LED-24 Explosion Proof Dock Light is U.L. approved
More informationARL2042 Receptacle. Long Description. Manufacturer Information PLUGS & RECEPTACLES GTIN Manufacturers Part Number UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 ARL2042 Receptacle Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More information1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens Part #: HALPRM-1000WMH Made in the USA The extremely durable Larson Electronics HALPRM-1000WMH metal halide
More informationPredator Medium Floodlight Wet Location
Predator Medium Floodlight Wet Location Installation and Maintenance Manual AFTER INSTALLATION DELIVER THIS MANUAL TO OWNER IMPORTANT SAFETY INSTRUCTIONS -READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING
More informationArktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
More informationHALO H7T. 6" RECESSED DOWNLIGHTING Incandescent
6" RECESSED DOWNLIGHTING Incandescent 6" Aperture Non-IC Ceiling 120V Line Voltage RECESSED DOWNLIGHTING Thermally Protected Housing Insulation must be kept 3" from all sides of the housing For use with
More informationLighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
More informationPRODUCT/SERVICE CLASSIFICATION CLASS 285 ELECTRICAL EQUIPMENT AND SUPPLIES (EXCEPT CABLE AND WIRE)
Please indicate which products and services your company can supply by checking the appropriate box(es). Check only the first box if your company can supply all of the products and services shown for this
More informationCam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
More informationASSEMBLY INSTRUCTIONS
A Canopy Assembly and wired by Licensed Electrician 1. Fixture Stud must be affixed to Electrical Box 2. Insert Nipple into Hickey 3. Slide Glass Canopy onto Nipple and secure with Hanger Loop with Washer.
More informationSpring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
More informationCam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
More informationMcGill Electrical Product Group puts safety first, producing electrical products and systems to comply with many NEC provisions.
PRODUCT CATALOG 001 While some manufacturers talk about quality and others talk about price, McGill EGS Electrical Product Group's McGill branded products have been upholding a reputation of excellence
More informationcircuit protection & wiring accessories
circuit protection & wiring accessories CIRCUIT BREAKERS P1 P BLOCKS & BUSBARS TERMINAL BLOCKS P2 P3 CONNECTORS, TERMINALS & FUSES P4 CLAMPS, CLEATS, CLIPS & TIES P5 P1 circuit protection & wiring accessories
More informationApplications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
More informationSWITCHES & ELECTRICAL ASSEMBLIES
07 96 Battery Disconnect Switches 97 Ignition & Starter Switches 98 Toggle Switches 101 Rocker Switches 102 Push/Pull Switches SWITCHES & ELECTRICAL ASSEMBLIES 103 Solenoids 104 Miscellaneous Switches
More informationSURFACE/CEILING & SUSPENDED MOUNT INSTALLATION
SURFE/CEILING & SUSPENDED MOUNT INSTALLATION E477827 E477827 APPLICATION NL luminaires are designed for use indoors, outdoors, wet locations, areas containing moisture, dirt, corrosion, vibration and rough
More informationTRAILBLAZER LIGHTING TRAILBLAZER LIGHTING
Emergency Wind-Up Flashlight 1 minute wind-up generates 30 minutes of continuous bright illumination 3 ultra bright L.E. D. for super bright light two brightness setting at the click of a button Flatlight
More informationNEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. NEC EBR Receptacle:
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
More informationTwist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
More informationReceptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
More informationPremium industrial grade straight blade receptacles
Technical Data Description 2-Pole, 3-Wire Grounding 15A 125V; 15A 250V 20A 125V; 20A 250V NEMA 5-15, 5-20, 6-15, 6-20 AH5262 AH5362 Design features Exclusive screw terminal guards provide fast, easy insulation
More informationFeatures. Emergency Stop Switch A22E. Install in 22-dia. or 25-dia. Panel Cutout. Safety Lock Mechanism to Prevent Misuse.
Switch A22E Install in 22-dia. or 25-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating errors. Easy mounting and removal of
More informationWP Plugs and DS Receptacles For FS and FD Cast Device Boxes
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes Weatherproof 3F Application: WP plugs and DS receptacles are used: wherever dust, dirt, moisture and corrosion are a problem outdoors or in locations
More informationTaxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
More informationInstallation Instructions
Roller & Roman Shades Lifting Systems Cassette and Sure-Lift EZ Lift Cordless EZ Pull Standard and Cassette R-Series Clutch SL-Series Clutch Spring Roller Fascias and Valances 3, 4 Flat and 4 Curved Fascia
More information7S Series. Standard Finishes Gray hammer epoxy/polyester pow-der coat. Compliances UL Listed. NEC OSHA
-2 7S Continuous Swivel and 7P Portable Series Extension Cord Reelites Furnished with 18-3 (2 wire plus safety ground) yellow SJOOW-A cord. Available with or without handlamps. Applications A safe and
More informationCompact Fluorescent Hard-Nox Outdoor Ceiling or Wall Mount
Compact Fluorescent Hard-Nox Outdoor Ceiling or Wall Mount Type -60-68 P5694 Diffuser White Clear Dimensions (Inches) Catalog No. Ribbed Prismatic Lamping A B C P5694-60 -68 1-9w CF 8-1/4 5-3/4 4-3/8 A
More informationR49 SERIES TABLE OF CONTENTS
PRODUCT GUIDE R49 SERIES TABLE OF CONTENTS 3 Product Overview 4 Features Spotlight 5 Code Logic 6 Panel Mount Receptacle Female 7 Panel Mount Receptacle Male 8 Cable Mount Receptacle 9 Bulkhead Mount Receptacle
More informationReceptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
More information