1400 Architura RGB Outdoor Linear LED

Transcription

1 1400 Architura RGB Outdoor Linear LED Features LEDs deliver even diffused light without LED images DMX input color control Life >50,000 hours (LM79) Construction Extruded aluminum housing. Diecast endcaps. Wire through connections optional. Slide-in polycarbonate lens. Cast swivels. Cantilever arms. All hardware is stainless steel. All internal components are Conformel coated, and electrical contacts are protected with a dielectric solution to ensure that moisture cannot affect contacts or other electrical parts of the fixture. Lengths All length dimensions are nominal and actual lengths may vary. LED 5 year / 50,000 hour warranty. LM-79 and LM-80. Driver / Electrical Integral Universal Voltage ( V), Class II Constant Current low voltage electronic driver with DMX controller. Voltage controlled - DMX Programmable in 4 ft. sections. Custom DMX control to specification. Optics Choice of asymmetric, flood or grazing distribution Mounting Wall, ceiling or ground post mount. Sliding swivels; or space saving sliding bracket; Hub brackets for toolless push fit wirethru row mounting. Finish Polyester powder coat applied over a 5 stage pretreatment. Silver, bronze, black or white. Custom colors at added cost. Options Glare Shields and external blade louvers. Certifications Listed ETL IP65 UL 1598, CSA sprinkler location within 4 feet off the ground. IES photometric files online at orgatech.com Asymmetric optic Actual Fixture size 2' 26" 3' 38" 4' 50" 6' 74" 8' 98" ORDERING LUMINAIRE SERIES Architura 1400 Luminaire Length 2' nominal - 2 3' nominal - 3 4' nominal - 4 6' nominal - 6 8' nominal - 8 Rows: 12' nominal - 12 Rows: 16' nominal - 16 Rows: 20' nominal - 20 Rows: 24' nominal - 24 LED Output System 10W/ft (RGB only) - RG Voltage 120V - 277V - Universal - U 347V - 3 Driver Constant Voltage Driver - VC Constant Current - CC Optics Asymmetric - A (Symmetric) Flood - F Mounting (Individual or Row Mount) Sliding Bracket - SB (Individual or Row Mount) Swivel Mount - SW 4" Extended Arm - A4 up to 24" Extended Arm - A24 Permapost - P Hub Bracket Row Mount 4" Bracket - HB4 8" Bracket - HB8 10" Bracket - HB10 12" Bracket - HB12 18" Bracket - HB18 24" Bracket - HB24 Custom - CU Finish Silver - SO Black - BL Bronze - BZ White - WH Finish Color Code: Custom - CU Natatorium Finish (add to end of Finish) - 2 Options None - N Glare Shield - G 1400 RG Factory specified 1 Maximum Candela = Located At Horizontal Angle = 0, Vertical Angle = 35 # 1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.) # 2 - Horizontal Cone Through Vertical Angle (35) (Through Max. Cd.)

2 1400 Architura RGBW Linear LED 2.75 Features LEDs deliver even diffused light without LED images DMX input color control Life >50,000 hours (LM79) Construction Extruded aluminum housing. Diecast endcaps. Wire through connections optional. Slide-in polycarbonate lens. Cast swivels. Cantilever arms. All hardware is stainless steel. All internal components are Conformel coated, and electrical contacts are protected with a dielectric solution to ensure that moisture cannot affect contacts or other electrical parts of the fixture. Lengths All length dimensions are nominal and actual lengths may vary. LED 5 year / 50,000 hour warranty. LM-79 and LM-80. Driver / Electrical Integral Universal Voltage ( V), Class II Constant Current low voltage electronic driver with DMX controller. Voltage controlled - DMX Programmable in 4 ft. sections. Custom DMX control to specification. Optics Choice of asymmetric, flood or grazing distribution. 3 Mounting Wall, ceiling or ground post mount. Sliding swivels; or space saving sliding bracket; Hub brackets for toolless push fit wirethru row mounting. Finish Polyester powder coat applied over a 5 stage pretreatment. Silver, bronze, black or white. Custom colors at added cost. Options Glare Shields and external blade louvers. Certifications Listed ETL IP65 UL 1598, CSA sprinkler location within 4 feet off the ground. IES photometric files online at orgatech.com Asymmetric optic Actual Fixture size 2' 26" 3' 38" 4' 50" 6' 74" 8' 98" ORDERING LUMINAIRE SERIES Architura 1400 Luminaire Length 2' nominal - 2 3' nominal - 3 4' nominal - 4 6' nominal - 6 8' nominal - 8 Rows: 12' nominal - 12 Rows: 16' nominal - 16 Rows: 20' nominal - 20 Rows: 24' nominal - 24 LED Output System 15W/ft (RGBW only) -RW Voltage 120V - 277V - Universal - U 347V - 3 Driver Constant Voltage Driver - VC Constant Current - CC Optics Asymmetric - A (Symmetric) Flood - F Mounting (Individual or Row Mount) Sliding Bracket - SB (Individual or Row Mount) Swivel Mount - SW 4" Extended Arm - A4 up to 24" Extended Arm - A24 Permapost - P Hub Bracket Row Mount 4" Bracket - HB4 8" Bracket - HB8 10" Bracket - HB10 12" Bracket - HB12 18" Bracket - HB18 24" Bracket - HB24 Custom - CU Finish Silver - SO Black - BL Bronze - BZ White - WH Finish Color Code: Custom - CU Natatorium Finish (add to end of Finish) - 2 Options None - N Glare Shield - G 1400 RW Factory specified 1 Maximum Candela = Located At Horizontal Angle = 0, Vertical Angle = 35 # 1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.) # 2 - Horizontal Cone Through Vertical Angle (35) (Through Max. Cd.)

3 Surface or recess mounting SB Sliding Bracket (adjustable; enables close mounting) Fixture mounts to the adjustable sliding bracket at any position along the length of the fixture. Mount bracket with ¼" screws or bolts (not supplied). Use for individual fixture or for multiple fixtures mounted in a row. Individual fixtures up to 2' long can be supported by a single sliding bracket attached to the center of the fixture. Note: Add 1/2" to each fixture length when using sliding brackets with interconnected fixture rows. Extended Arm Fixture Center 2' Center 3' 24" 4' 32" 6' 48" 8' 64" Add 1/2" to each fixture length when using hub brackets with interconnected fixtures. SW Swivel Mount (½" NPT Nipple) Heavy duty adjustable mounting arm bracket with 1/2" NPT. Fixture mounts to swivel mount arm bracket, field adjustable along the length of the fixture. Use for individual fixture or for multiple fixtures mounted in a row. The Standard Swivel Mount bracket (SW) arm extends approximately 3". Extended arms are available from 4" (A4) up to 24" (A24), see next page. 16" weatherproof cord exits 6" from the back right end of individual fixtures with the lens in the up position. All brackets can be installed at rough-in, allowing the fixture to be attached and connected to power later. Note: Add 1/2" to each fixture length when using Swivel Mount Brackets with interconnected fixture rows Wall mounting, bracket down Wall bracket angled up or down mounting plate Wall mounting, bracket up Swivel mount up or down aiming 30 ¼" 1" (4) threaded hole ½" NPT x ⅞" threaded nipple 1¼" ⅞" ½" NPT Nipple ¼" ¾" 2.75" 1½" 2.835" 5.75" adjustable along the length of the fixture

4 ion 1400 Architura RGB/RGBW Section View: A4 to A24 4" to 24" Extended Arm Power cords can be routed through arms, exiting close to the wall to connect to an adjacent J-Box or other power outlet, providing a tidy installation. 5" x 6" aluminum mounting plate 2½" Accepts 1 /2" I.P. threaded nipple 5" 51/8"± wire access/ power cord entry 2" 1¾" square arm with swivel #2 Wire access hole and cover with (2) 6-32 screws (4) slotted mounting holes for screws for ¼" Ø (screws not provided) 4¾" 6" 4" to 36" extended arm(s) (48" with cantilever support) Line 5 /8" 3¾" 5 /8" P Permapost Perma posts provide easy at-grade installation. Includes standard 3" (SW) swivel mount bracket. PermaPost Installation Elevation Side View: Scale: N.T.S. Section View: Scale: N.T.S. Swivel Assembly Cup Accepts 155/8"± 1 /2" I.P. threaded nipple Architura-S LED assembly Swivel Mount (Swivel fastens to PermaPost via 1 /2 i.p. nipple) Cap 51/8"± PermaPost assembly (Finish: Black) Ground line Line Ground Neutral Post with fins Post Installation 155/8"± Elevation Side View: Scale: N.T.S. Omegalux LED assembly PermaPost assembly (Finish: Black) Ground line Section View: Scale: N.T.S. Swivel Mount (Swivel fastens to PermaPost via 1 /2 i.p. nipple) 14 1 / /8 Swivel Assembly Cup Accepts 1/2" I.P. Permapost threaded nipple Conduit by others 14 1 / /8 Conduit by others Cap 5 1/8"± t with fins Elevation Side View: Scale: N.T.S. Swivel Mount Omegalux via LED assembly 1 /2 i.p. nipple) but may 155/8"± be modified or improved in accordance with current electrical, safety PermaPost or assembly manufacturing (Finish: Black) Ground line Line (Swivel fastens to PermaPost Ground Neutral /8 14 1/2 ermapost Conduit by others

5 Row Mounting SB, SW, A4-A24, PP (Sliding Bracket, Swivel Mount, A4-A24 Extended Arm, Permapost) Specifying Interconnecting fixtures Tool-less, wire-thru, push fit hub connections allow individual fixture rotation during installation, solving the problem of aiming connected rows. Note: Add 1/2" to each fixture length when using Hub Brackets with interconnected fixture rows. Row mounting 18" weatherproof cord exits 6" from the back left end of fixtures with the lens in the up position. When fixtures are inverted down aiming, the cord will be on the right. All fixtures are provided with capped liquid tight connectors allowing field modification. Optional locking bracket: Secures fixtures at connecting points. 2.75" long slides into the channel and secures with two screws at the base. For swivel mounting, locking bracket will be on the cord grip side of the fixture. Unit powered Row mounting Supplied with 18" weatherproof cord 6" from the back right with the lens facing up. For down aiming, the power cord will be on the right. Field modifiable. Starter connector End connector Row mounting: Architura shown as uplight Maximum row length: 150 ft. Row mounting: Architura shown as downlight Maximum row length: 150 ft.

6 HB Hub Bracket Heavy duty mounting arm with a choice of a 4" (HB3) arm extension up to a 24" (HB24) extended arm bracket used for row mounting of multiple Architura fixtures. Consult factory for custom arm extension lengths. Brackets include locking set screws and fixture alignment brackets to secure fixtures after aiming. Row mounted fixtures include patented tool-less, push-fit wire-through connection system. Row starter fixtures include 18" of weatherproof wire leads. Installation of Hub Bracket on interconnected rows Mounting brackets require structural support at bracket mounting centers. We recommend that this should be at least 4"H x 4'W. Refer to table below for mounting centers. 1. Set the first bracket where you want the row to begin with the mounting screw side of the bracket outwards for access to mounting screws after installation. 2. Add ½" to the fixture length (not including the connecting hubs.) This will be the center of the next mounting arm (see length table to right). 3. Using a bracket as a template, mark the position of the mounting holes at the center of the slots. Mount the next bracket with the mounting slots outward. Repeat for each fixture length in the row. 4. Do not fully tighten the bracket mounting screws after the second bracket to enable sliding adjustment to insert the next fixture. 5. Slide the locking bracket onto each fixture before installing. Then, slide into place to connect fixtures after aiming and secure with screws. 6. Support fixtures and connect the push on power connection plugs through the Hub Bracket hole, then connect fixtures with a slight rotating motion and the tool-less precision push-fit hub system seals against moisture while enabling free rotation and aiming. The long male connector allows for open connection of up to ¼" without compromising structural strength or the wet seal. 7. Lamp install. Remove any plastic protection on the reflectors. Back off the captive screws to remove the lens retainer. Slide out the lens. Insert the lamp until it locks. Replace the lens and retainer. Hub bracket slotted for wall mounting adjustment Aiming lock, set screw Hub bracket with locking set-screw to secure fixtures after aiming. Optional locking bracket: Secures fixtures at connecting points. 2.75" long slides into the channel and secures with two screws at the base. For swivel mounting, locking bracket will be on the cord grip side of the fixture.

7 Row Mounting HB (Hub Bracket) Specifying Interconnecting fixtures Tool-less, wire-thru, push fit hub connections allow individual fixture rotation during installation, solving the problem of aiming connected rows. Note: Add 1/2" to each fixture length when using Hub Brackets with interconnected fixture rows. Row mounting 18" weatherproof cord exits 6" from the back left end of fixtures with the lens in the up position. When fixtures are inverted down aiming, the cord will be on the right. All fixtures are provided with capped liquid tight connectors allowing field modification. Optional locking bracket: Secures fixtures at connecting points. 2.75" long slides into the channel and secures with two screws at the base. Unit powered Row mounting Supplied with 18" weatherproof cord 6" from the back right with the lens facing up. For down aiming, the power cord will be on the right. Field modifiable. Starter connector End connector Row mounting: Architura shown as uplight Maximum row length: 150 ft. Row mounting: Architura shown as downlight Maximum row length: 150 ft.

8 External Louver Glare Shield glare shield hooks into this groove Architura LED Asymmetric Architura LED Flood