Series Mounting Accessory Distribution Source Color Temperature Voltage 10DEG 20DEG 40DEG 60DEG 60X15DEG

Transcription

1 705M - ase Mount dditional mounts shown on page /2 8-3/8 (213mm) 6-3/4 (171mm) 8 onstruction Rugged die cast aluminum housing with clear tempered glass lens & 100% silicone rubber gaskets. ll hardware is corrosion resistant stainless steel. Knuckle fitting is highly adjustable to allow for precise aiming. Source Powerful 36 LED light engine is available in 4 color temperature options. The light engine combined with a highly effective heat sink produces excellent efficacy up to 75.8 lumens per watt. Lumen output is up to 3,212 lumens based on 3000K T. L70 > 60, Optics Highly efficient reflector system combined with various holographic films, produce one of five distributions for a wide variety of applications. Environment ETL / cetl listed wet location and IP66 rated. mbient operating temperature is -20 to stage pre-treated polyester powder coat painted finish is available in four standard colors. ustom colors are also available by modification. Warranty 5-year limited warranty. omplete warranty terms located at ustomerresources/terms_and_conditions.aspx ctual performance may differ as a result of end-user environment and application. ll values are design or typical values, measured under laboratory conditions at 25. ssembled in merica (uy merican ct ompliant) 12-5/8 (321mm) TLOG NUMER Example: 705M 20DEG LSF2 30K MVOLT KT Electrical Integral electronic driver consumes 42.5W. Driver input is universal V and is equipped with 0-10V dimming to 10% standard. F lass Part 15 Subpart compliant. Mounting ccessory Distribution Source olor Temperature Voltage ianca White LED Full Flood 705M djustable ase Mount (705 ) 705RM djustable Remote Mount Driver (705 ) 705SF djustable Surface Feed Mount (705 ) 705W djustable Wall/eiling Mount (705 ) 10DEG 20DEG 40DEG 60DEG 60X15DEG 10 Degrees 20 Degrees 40 Degrees 60 Degrees 60 Degrees x 15 Degrees LSF2 LED Flood 2 27K 2700K T 30K 3000K T 35K 3500K T 40K 4000K T MVOLT Multi Volt 120V thru 277V Internal Shielding External Shielding Special (lank) F2 No Internal Shielding affle (lank) GV2 TH2 No External Shielding Glare Visor Top Hat KT WHT DT SIT PF* lack Textured White Textured Dark ronze Textured Silver Textured ustom Paint MOD* Modification / onsult Factory Describe Modification: Notes Weight 20 ft. max. distance for remote power supply Performance data for 27K, 35K and 40K based on 30K LM79 test results and multiplier. See page 4 for accessory details. *vailable by modification only. onsult factory. : 11 lbs. (4.5 kg) LED 1

2 PERFORMNE DT LUMEN OUTPUT Lumen values are from photometric tests performed in accordance with IESN LM Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. ctual performance may differ as a result of end-user environment and application. ontact factory for performance data on any configurations not shown here. ELETRIL LOD LEDs System Watts Nominal Distribution eam ngle Field ngle 2700K 3000K 3500K 4000K Max d Lumens LPW Max d Lumens LPW Max d Lumens LPW Max d Lumens LPW x urrent () System Model Load (W) - Full Flood PHOTOMETRI DIGRMS 10 DISTRIUTION Test Report: LTL DEG 30K Lumens: 3212 Wattage: 42.4W Efficacy: 75.8 Max. andela: 56, DISTRIUTION 40 DISTRIUTION 60 x 15 DISTRIUTION Test Report: LTL DEG 30K Lumens: 3069 Efficacy: 72.2 Max. andela: 13, Test Report: LTL DEG 30K Lumens: 3057 Efficacy: 71.9 Max. andela: 4, DISTRIUTION Test Report: LTL DEG 30K Lumens: 3010 Efficacy: 70.8 Max. andela: 2, Test Report: LTL X15DEG 30K Lumens: 3032 Wattage: 42.4W Efficacy: 71.5 Max. andela: 6, fc 1' 4" fc 3' 47.9 fc 5' 4" 26.6 fc 9' 3" 64.9 fc 60 11' 15 2' fc 2' 9" 33.1 fc 7' 0" 12.2 fc 6.7 fc 18' 7" 16.7 fc 23' 1" 5' 3" 64.6 fc 4' 2" 15.1 fc 5.5 fc 16' 1" 3.1 fc 27' 11" 7.6 fc 34' 7" 7' 11" 37.3 fc 5' 7" 8.7 fc 14' 1" 3.2 fc 21' 5" 1.8 fc 37' 3" 4.4 fc 46' 2" 23.6 fc 7' 0" 5.5 fc 17' 7" 2.0 fc 26' 9" 1.1 fc 46' 7" 2.8 fc 57' 13' 2" Photometric data based on test results from an independent NIST traceable testing lab. IES data is available at lways refer to our website for the latest IES file updates. LED 2

3 SI SYSTEM WIRING INFORMTION This very basic system wiring diagram provides an overview of components and materials required for a simple installation of luminaires controlled by 0-10v dimmer control. These diagrams should not be used in place of actual installation instructions or submittal drawings prepared for a specific project. may be dimmed using common 0-10v fluorescent-style current-sink or current-source dimming controls. These controls can range from simple wall box units to elaborate rack mounted systems, but all must conform to the IE 0-10v dimming standard. elden 9829 cable is the preferred communication/ data cable used to carry the 0-10v signal to the luminaires V 1000' max. w/remote ase 120V-277v input is required at each luminaire. No proprietary cables or fittings are required to bring power to the luminaire. Metallic conduit and standard fittings are compatible as are multi-conductor cords provided they are appropriate to the mounting location. Proper separation of lass I (line voltage) and lass II (0-10v) wiring must be provided per NE. D max. D Remote distances of up to 20 away from the mount box are allowable when the 701RM Remote mounting option is selected. Use elden 9829 to carry the data and #16 standard to carry the lass II power to the luminaire head. ecause the power is low voltage lass II, no separation is required V 1000' max. E The die cast aluminum mounting base can be specified with up to four threaded 1/2 NPT holes on the sides and bottom for conduit and/or cord entry and exit. Proper sealing of the fittings is required at installation time when used outdoors. Power & 0-10V onnection ONNET YELLOW TO VIOLET ON ONE FIXTURE ONLY 0-10v DIMMER (optional) E F F The dimming driver in can be configured for current-sink or current-source dimming. urrent-sink is the most common and is configured by tying the Yellow wire to the Purple wire on one fixture only, leaving the Yellow wire capped on the other fixtures. For current-source applications, leave all the Yellow wires capped. TO OTHER FIXTURES LED 3

4 ESSORY OPTIONS GLRE VISOR GV2 Glare Visor KT textured black paint DT textured dark bronze paint PF custom paint finish Glare control: Optional attachments shield direct view into fixture aperture. *Glare control options cannot be combined. 9 1/4" (235mm) (152mm) 3/4" (19mm) 6 13/1 (173mm) 3/4" (19mm) 7 1/2" (191mm) 6 13/32" (163mm) 8 1/2" (216mm) TOP HT 5 7/ (149mm) (152mm) TH2 Top Hat KT textured black paint DT textured dark bronze paint PF custom paint finish 9 27/32" (250mm) 3 5/64" (78mm) 2 7/1 (62mm) 8 1/2" (216mm) 3 5/32 (80mm) 9 1/4" (235mm) FFLE 13/1 (21mm) (152mm) 1 15/32" (37mm) 1 15/32" 5 7/ (37mm) (149mm) 13/1 (21mm) F2 affle KT textured black paint DT textured dark bronze paint PF custom paint finish 7 9/1 (192mm) 8 3/1 (208mm) 6 7/ (175mm) LIQUID-TIGHT ORD GRIP able Diameter Range diameter ORDGP1 Liquid-tight cord grip 1 3/4" (44mm) LED 4

5 DIMENSIONS & MOUNTING INTEGRL POWER SUPPLY DIMENSIONS - Full Flood 705SF & 705W Mounts - Full Flood 705M Mount 1 Surface feed 705SF mount (shown) is equipped with (4) 1/2" NPT side holes for in/thru feed of conduit or cable. Proper sealing of fittings is required at installation when used outdoors. The 705W mounts over a recessed j-box and has no side entries / (194mm) Water-tight fitting accessory sold separately 6 3/4" (171mm) 2" (51mm) Set Screw for locking in rotational aiming 9 3/4" (248mm) Data In Power In 7 5/ (194mm) 8 3/ (213mm) 3 5/ (92mm) 12 5/ (321mm) REMOTE POWER SUPPLY DIMENSIONS - Full Flood 705RM Mount rotation /32" (131mm) 5" (127mm) djustability LED 5