OSQ Series LED Area/Flood Luminaire Medium

Transcription

1 10.6" (69mm) 19.0" (48mm) OSQ Series LED rea/flood Luminaire Medium Product Description 3" (79mm) NEM Photocell (R Option Only) D Mount The OSQ rea/flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to last, the housing is rugged cast aluminum with an integral, weathertight LED driver compartment. Versatile mounting configurations offer simple installation. Its slim, low-profile design minimizes wind load requirements and blends seamlessly into the site providing even, quality illumination. power designator is a suitable upgrade for HID applications up to 50 Watt. power designator is a suitable upgrade for HID applications up to 400 Watt. pplications: Parking lots, walkways, campuses, car dealerships, office complexes, and internal roadways 3.8" (97mm) 5.0" (635mm) 8" (06mm) Performance Summary 19.0" (48mm) Utilizes BetaLED Technology 3" (79mm) NanoOptic Precision Delivery Grid optic Made in the U.S.. of U.S. and imported parts NEM Photocell (R Option Only) CRI: Minimum 70 CRI (4000K & 5700K); 80 CRI (3000K) CCT: 3000K (+/- 300K), 4000K (+/- 300K), 5700K (+/- 500K) 3.8" (97mm) Limited Warranty : 10 years on luminaire/10 years on Colorfast DeltaGuard finish 4.8" (1mm) ccessories Mount Field-Installed Backlight Shield OSQ-BLSMF Front facing optics OSQ-BLSMR Rotated optics 7.6" (701mm) 10.6" (69mm) 19.0" (48mm) 3" (79mm) NEM Photocell (R Option Only) Ordering Information Fully assembled luminaire is composed of two components that must be ordered separately: Example: Mount: OSQ- SV + Luminaire: OSQ NM ME 40K-UL SV Mount (Luminaire must be ordered separately) 3.8" (97mm) OSQOSQ- djustable rm OSQ-D Direct rm Color Options: SV Silver BK Black BZ Bronze PB Platinum Bronze WH White 5.0" (635mm) 8" (06mm) Luminaire (Mount must be ordered separately) OSQ NM Product Version Mounting Optic OSQ NM No Mount ME* Type II Medium 3ME* Type III Medium 4ME* Type IV Medium 5ME Type V Medium 5SH Type V Short 15D 15 Flood 5D 5 Flood 40D 40 Flood 60D Flood 11W 168W CCT Voltage 30K 3000K 40K 4000K 57K 5700K US * Canada UL Universal 10-77V UH Universal V Color Options SV Silver BK Black BZ Bronze PB Platinum Bronze WH White Options 19.0" (48mm) DIM 0-10V Dimming -- Control by others -- Refer to Dimming spec sheet for details -- Can't exceed wattage of specified input power designator F Fuse 3.8" -- When code dictates fusing, use (97mm) time delay fuse ML Multi-Level -- Refer to ML spec sheet for details -- High: 100%, Low: 30% -- Intended for downlight applications at 0 tilt Q9 R RL RR 3" Field djustable(79mm) Output -- Refer to Field djustable Photocell OutputNEM spec sheet for details NEM Photocell Option Only) -- Intended(Rfor downlight applications with maximum 45 tilt -- Photocell by others 4.8" Rotate Left (1mm) -- LED and optic are rotated to the left Rotate Right -- LED and optic are rotated to the right See for warranty terms * vailable with Backlight Shield when ordered with field-installed accessory (see table above) Rev. Date: V4 08//014 US: T (800) F (6) Canada: T (800) F (800)

2 Product Specifications CONSTRUCTION & MTERILS Slim, low profile design minimizes wind load requirements Luminaire housing is rugged die cast aluminum with an integral, weathertight LED driver compartment and high performance heat sink Convenient interlocking mounting method on direct arm mount. Mounting adapter is rugged die cast aluminum and mounts to 3-6" (76-15mm) square or round pole, secured by two 5/16-18 UNC bolts spaced on " (51mm) centers Mounting for the adjustable arm mount adapter is rugged die cast aluminum and mounts to " (51mm) IP,.375" (6m) O.D. tenon djustable arm mount can be adjusted 180 in increments Designed for uplight and downlight applications Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Silver, bronze, black, white, and platinum bronze are available Weight: 6 lbs. (1kg) ELECTRICL SYSTEM Voltage: 10-77V or V, 50/60Hz, Class 1 drivers Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Integral 10kV surge suppression protection standard To address inrush current, slow blow fuse or type C/D breaker should be used REGULTORY & VOLUNTRY QULIFICTIONS culus Listed Suitable for wet locations Enclosure rated IP66 per IEC 6059 when ordered without R option Consult factory for CE Certified products Pending certification to NSI C , 3G bridge and overpass vibration standards 10kV surge suppression protection tested in accordance with IEEE/NSI C6.41 Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in STM Standard B 117 Meets Buy merican requirements within RR DLC qualified when ordered with 30K (5ME, 5SH optics), 40K (ME, 3ME, 4ME, 5ME, 5SH optics), or 57K (ME, 3ME, 4ME, 5ME, 5SH optics). Please refer to for most current information Electrical Data* Recommended Cree Outdoor Luminaire Lumen Maintenance Factors () 1 mbient 5 C (41 F) 10 C (50 F) 15 C (59 F) 0 C (68 F) 5 C (77 F) System Watts V Total Current 10V 08V 40V 77V 347V 480V * Electrical data at 5 C (77 F) 5K hr Projected 50K hr Projected 75K hr Calculated K hr Calculated 3 1 Lumen maintence values at 5 C (77 F) are calculated per TM-1 based on LM-80 data and in-situ luminaire testing In accordance with IESN TM-1-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESN LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESN TM-1-11, Calculated Values represent time durations that exceed six times (6X) the IESN LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)

3 Photometry ll published luminaire photometric testing performed to IESN LM standards by a NVLP certified laboratory. To obtain an IES file specific to your project consult: ME Type II Medium Distribution ,136 B-U0-G1 10,904 B-U0-G 11,649 B-U0-G 13,703 B-U0-G 16,356 B3-U0-G 17,474 B3-U0-G RESTL Test Report #: PL OSQ ** ME 40K-UL Lumens: 10,988 OSQ ** ME 40K-UL Lumens: 16,356 FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt Type II Medium w/bls Distribution ,831 B1-U0-G1 9,346 B-U0-G 9,985 B-U0-G RESTL Test Report #: PL OSQ ** ME 40K-UL w/osq-blsmf Lumens: 14,643 OSQ ** ME 40K-UL w/osq-blsmf Lumens: 14,00 FC at grade 11,746 B-U0-G 14,00 B-U0-G 14,978 B-U0-G * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt 3ME Type III Medium Distribution ,04 B-U0-G 10,793 B-U0-G 11,530 B-U0-G 13,564 B3-U0-G3 16,189 B3-U0-G3 17,96 B3-U0-G3 RESTL Test Report #: PL OSQ ** 3ME 40K-UL Lumens: 16,57 OSQ ** 3ME 40K-UL Lumens: 16,189 FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt Type III Medium w/bls Distribution ,737 B1-U0-G 9,35 B1-U0-G 9,866 B1-U0-G 11,606 B1-U0-G 13,853 B-U0-G3 14,799 B-U0-G3 RESTL Test Report #: PL OSQ ** 3ME 40K-UL w/osq-blsmf Lumens: 14,9 OSQ ** 3ME 40K-UL w/osq-blsmf Lumens: 13,853 FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt

4 Photometry ll published luminaire photometric testing performed to IESN LM standards by a NVLP certified laboratory. To obtain an IES file specific to your project consult: 4ME Type IV Medium Distribution ,949 B-U0-G 10,68 B-U0-G 11,41 B-U0-G3 13,44 B3-U0-G3 16,0 B3-U0-G3 17,117 B3-U0-G3 RESTL Test Report #: PL OSQ ** 4ME 40K-UL Lumens: 16,93 OSQ ** 4ME 40K-UL Lumens: 16,0 FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt Type IV Medium w/bls Distribution ,644 B1-U0-G 9,14 B1-U0-G 9,747 B1-U0-G RESTL Test Report #: PL OSQ ** 4ME 40K-UL w/osq-blsmf Lumens: 13,647 OSQ ** 4ME 40K-UL w/osq-blsmf Lumens: 14,00 FC at grade 11,466 B-U0-G3 13,686 B-U0-G3 14,61 B-U0-G3 * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt 5ME Type V Medium Distribution ,716 B3-U0-G3 10,30 B4-U0-G3 10,473 B4-U0-G3 13,075 B4-U0-G4 15,480 B4-U0-G4 15,710 B4-U0-G4 RESTL Test Report #: PL OSQ ** 5ME S 40K-UL Lumens: 0,709 OSQ ** 5ME 40K-UL Lumens: 15,480 FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt 5SH Type V Short Distribution ,906 B3-U0-G3 10,544 B4-U0-G3 10,701 B4-U0-G3 13,359 B4-U0-G3 15,817 B4-U0-G4 16,05 B4-U0-G4 RESTL Test Report #: PL OSQ ** 5SH S 40K-UL Lumens: 1,066 OSQ ** 5SH 40K-UL Lumens: 15,817 FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: Valid with no tilt

5 Photometry ll published luminaire photometric testing performed to IESN LM standards by a NVLP certified laboratory. To obtain an IES file specific to your project consult: 15D Flood Distribution ,095 10,769 10, ,643 16,153 16,393 RESTL Test Report #: PL OSQ ** 15D S 40K-UL Lumens:,600 OSQ ** 15D 40K-UL Lumens: 16,153 Tilt FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens 5D Flood Distribution ,095 10,769 10, ,643 16,153 16,393 RESTL Test Report #: PL OSQ ** 5D S 40K-UL Lumens:,633 OSQ ** 5D 40K-UL Lumens: 16,153 Tilt FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens 40D Flood Distribution 9,001 10,657 10, ,501 15,985 16, RESTL Test Report #: PL OSQ ** 40D S 40K-UL Lumens:,404 OSQ ** 40D 40K-UL Lumens: 15,985 Tilt FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens

6 Photometry ll published luminaire photometric testing performed to IESN LM standards by a NVLP certified laboratory. To obtain an IES file specific to your project consult: 60D Flood Distribution Lumens* Lumens* Lumens* 9,095 10,769 10, ,643 16,153 16,393 RESTL Test Report #: PL OSQ ** 60D S 40K-UL Lumens:,301 OSQ ** 60D 40K-UL Lumens: 16,153 Tilt FC at grade * delivered lumens at 5 C (77 F). ctual production yield may vary between -4 and +10% of initial delivered lumens

7 Luminaire EP Fixed rm Mount OSQ-D Weight: 6 lbs. (1kg) djustable rm Mount OSQ- Weight: 6 lbs. (1kg) Tenon Configuration (0-80 Tilt); If used with Cree tenons, please add tenon EP with Luminaire EP PB-1*; PT-1; PW-13** 0 Tilt PB-*; PB-R.375; PD-4(180); PT-(180); PW-3** PB-*; PD-4(90); PT-(90) PB-3*; PD-34(90); PT-3(90) PB-3*; PT-3(10) PB-3*; PB-3R.375 PB-4*(180) Tilt Tilt Tilt Tilt Tilt Tilt Tilt Tenon Configuration ( Tilt); If used with Cree tenons, please add tenon EP with Luminaire EP PB-4*(90); PB-4R.375; PD-44(90); PT-4(90) PB-1*; PT-1; PW-13** PB-*; PB-R.375; PD-4(180); PT-(180); PW-3** PB-* PB-3* PB-3*; PT-3(10) PB-3*; PB-3R.375 PB-4*(180) PB-4*(90); PB-4R.375 Tilt * Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), 5 (5"), or 6 (6") for quad luminaire orientation ** Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6")

8 Tenon EP Tenon EP PB-1* None PB-* 0.8 PB-3* 1 PB-4*(180) PB-4*(90) 11 PB-R PB-3R PB-4R PD Series Tenons 0.09 PT Series Tenons 00 PW-13** 0.47 PW-3** 0.94 WM WM-4 05 Tenons and Brackets (must specify color) Square Internal Mount Vertical Tenons (Steel) - Mounts to 3-6" (76-15mm) square aluminum or steel poles PB-1* Single PB-4*(90) Quad PB-* 180 Twin PB-4*(180) 180 Quad PB-3* 180 Triple Square Internal Mount Horizontal Tenons (luminum) - Mounts to 4" (10mm) square aluminum or steel poles PD-4(90) Twin PD-34(90) Triple PD-4(180) 180 Twin PD-44(90) Quad Wall Mount Brackets - Mounts to wall, roof or side of wood pole WM- Horizontal WM-4 L-Shape Round Internal Mount Vertical Tenons (Steel) - Mounts to.375" (6m) O.D. round aluminum or steel poles or tenons PB-R.375 Twin PB-4R.375 Quad PB-3R.375 Triple Round External Mount Horizontal Tenons (luminum) - Mounts to.375" (6m) O.D. round aluminum or steel poles or tenons - Mounts to square pole with PB-1* tenon PT-1 Single PT-3(90) Triple PT-(90) Twin PT-4(90) Quad PT-(180) 180 Twin Mid-Pole Bracket - Mounts to square pole PW-13** Single PW-3** Double * Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), 5 (5"), or 6 (6") for quad luminaire orientation ** These EP values must be multiplied by the following ratio: Fixture Mounting Height/Total Pole Height. Specify pole size: 3 (3"), 4 (4"), 5 (5"), or 6 (6") 014 Cree, Inc. and/or one of its subsidiaries. ll rights reserved. For informational purposes only. Content is subject to change. See for patents that cover these products. Cree, the Cree logo, BetaLED, the BetaLED Technology logo, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and Precision Delivery Grid and OSQ are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. NEM is a registered trademark of the National Electrical Manufacturers ssociation. The DesignLights Consortium logo and the DLC QPL Listed logo are registered trademarks of Northeast Energy Efficiency Partnerships, Inc.