80 Watt Multi-Purpose LED Area Light

Transcription

1 JGMPAL Watt Multi-Purpose LED Area Light STANDARD Project: Type: Catalog #: WET kv Surge Protection IP65 The JGMPAL series is a group of architectural LED area luminaires designed to illuminate parking areas, pathways, building facades, loading docks, and a wide variety of other large, general site lighting applications. Multiple ing options make the JGMPAL a versatile luminaire for flood lighting, pole-, ground- and wall-ed area lighting, and other outdoor lighting requirements. FEATURES Available in (warm white), 4000K (neutral white) and 5000K (cool white). * Long-life LEDs provide hours of operation with at least 70% of initial lumen output (L 70 ). ** Standard optic provides an IES roadway type V distribution, or a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution. Type III models deliver 9,57 lumens & 6 lumens per watt (LPW) at ; 0,307 lumens & 9 LPW at ; and 0,54 lumens and 3 LPW at. * models deliver 9,75 lumens & LPW at ; 0,033 lumens & LPW at ; and 0,34 lumens and 9 LPW at. * Universal AC voltage (50-60Hz) is standard. Power factor > Total harmonic distortion. rendering index. Optional glare shields (full & half) & wire guards are available. Die cast aluminum housing with durable, dark bronze powder coat finish, and a heat-resistant polycarbonate lens. Wireway enclosure is sealed with a water-tight, silicon rubber gasket. Effective projected areas (EPA's) are: Front = 0.38 square feet Side = 0.30 square feet Face =.04 square feet Threaded receptacle (½ NPS) for photocell. Optional arms and slip-fitters provide additional photocell ing options. Easy installation in new construction or retrofit applications. WARRANTY & LISTINGS standard trunnion optional yoke culus listed for wet locations (-30 C to 40 C / - F to 04 F) IP65 rated. DLC standard approved Complies with FCC Part 5, Class B. Complies with EN60-4-5, surge immunity (kv). 5-year warranty on all electronics and housing. MOUNTING OPTIONS Trunnion is standard. Slip-fitter provides attachment to poles ( ⅜ O.D. tenon). Steel arm provides secure attachment to flat surfaces. Yoke models are available by special order. Steel Arm DIMENSIONS ⅝ Slip-Fitter 9 ⅞ Yoke Mount Option 3 ⅜ * Contact factory for other color temperatures and lumen packages. ** L 70 hours are IES TM-- calculated hours. Weight: 9.6 lb. ORDERING INFORMATION JGMPAL Mounting Type T = Trunnion * Y = Yoke Temp. 3K = 5K = 3K = 5K = Examples: (Slip-Fitter, Type III): JGMPAL-T-4K-T3 + JGMPAL-SF-/300 (Yoke, ): JGMPAL-Y-4K (no options available) (Arm, NEMA 7H x 7V) JGMPAL-T-4K + JGMPAL-A-/300 Distribution Type ** T3 = Type II I 9,57 0,307 0,54 9,75 0,033 0,34 / Watt Options * (Order Separately) JGMPAL-SF-/300 = Slip-Fitter Mount JGMPAL-A-/300 = Steel Arm Mount MPAL//50-FGS = Full Glare Shield MPAL//50-HGS = Half Glare Shield MPAL//50-WG = Wire Guard * Note: For Slip-Fitter or Steel Arm ing, order a luminaire with the standard Trunnion installed (LEDMPAL-T), and either the Slip-Fitter (LEDMPAL-SF-/300) or Steel Arm (LEDMPAL-A-/300). The Slip-Fitter and Steel Arm s are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion. ** Note: distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the option.

2 JGMPAL Watt Multi-Purpose LED Area Light ELECTRICAL DATA CRI Per Watt Input Input Current (A) Power Voltage Factor THD 3 L 70 Hours 4 V 40V 77V JGMPAL-3K-T3 JGMPAL-4K-T3 JGMPAL-5K-T3 JGMPAL-3K JGMPAL-4K JGMPAL-5K 9,57 0,307 0,54 9,75 0,033 0, rendering index. All 50-60Hz. 3 Total harmonic distortion. 4 L 70 refers to the number of hours at which lumen output declines to 70% of the initial level. L 70 hours are IES TM-- calculated hours. PHOTOMETRIC DATA JGMPAL-5K (0,54, Type III [T3] Distribution) Foot Candles Notes: Isofootcandle plots depict initial footcandles at grade. Gridlines represent units of ing height of 5 feet. Zone % FL - Front - Low (0-30),303 % FM - Front - Medium (30-60) 3,686 35% FH - Front - High (60-),585 5% FVH - Front - Very High (-90) 8 % Total Forward Light 6,655 63% BL - Back - Low (0-30),55 % BM - Back - Medium (30-60), 0% BH - Back - High (60-) 464 4% BVH - Back - Very High (-90) 0% Total Back Light 3,866 37% UL - Up Light - Low (90-) 0% UH - Up Light - High (-) 0% Total Up Light 0% Total 0,54 % JGMPAL-5K (0,34, Distribution) Zone % FL - Front - Low (0-30),69 % FM - Front - Medium (30-60),860 8% FH - Front - High (60-) 947 9% FVH - Front - Very High (-90) 7 % Total Forward Light 5,93 50% BL - Back - Low (0-30),73 % BM - Back - Medium (30-60),80 7% BH - Back - High (60-) 93 9% BVH - Back - Very High (-90) % Total Back Light 5,6 50% UL - Up Light - Low (90-) 0% UH - Up Light - High (-) 0% Total Up Light 3 0% Total 0,34 %

3 JGMPAL Watt Multi-Purpose LED Area Light 863,75,588 3, Maximum Candela = 3,45 Horizontal Vertical NEMA Floodlight Type Data Field Angles: Horizontal 7 Vertical 6 NEMA Type: Horizontal Vertical 7H 7V Shields Full Half Wire Guards

4 JGMPAL Project: Type: Catalog #: Watt Multi-Purpose LED Area Light standard trunnion STANDARD WET -4kV Surge Protection IP65 The JGMPAL series is a group of architectural LED area luminaires designed to illuminate parking areas, pathways, building facades, loading docks, and a variety of other general site lighting applications. Multiple ing options make the JGMPAL a versatile luminaire for flood lighting, pole-, ground- and walled area lighting, and other outdoor lighting requirements. FEATURES V models available in (warm white), 4000K (neutral white) and 5000K (cool white) V models available in &. * Long-life LEDs provide a minimum of 65,000 hours of operation with at least 70% of initial lumen output (L 70 ). ** Standard optic provides an IES roadway type V distribution, or a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution. Type III models (V) deliver,43 lumens & 4 lumens per watt (LPW) at ;,64 lumens & 6 LPW at ; and,543 lumens & LPW at. * Type III models (347-4V) deliver,354 lumens & LPW at and,507 lumens & LPW at. * models deliver (V),58 lumens & LPW at ;,05 lumens & LPW at ; and,353 lumens & LPW at. * models (347-4V) deliver,368 lumens & LPW at both &. * Universal or AC voltage (50-60Hz) is standard. 0-0vdc dimming capability is standard. Power factor > Total harmonic distortion. rendering index. Optional glare shields (full & half) & wire guards are available. Die cast aluminum housing with durable, dark bronze powder coat finish, and a heat-resistant polycarbonate lens. Wireway enclosure is sealed with a water-tight, silicon rubber gasket. Effective projected areas (EPA's) are 0.38 square feet (sf, front); 0.30 sf (side) &.04 sf (front). Threaded receptacle (½ NPS) for photocell. Optional arms and slip-fitters provide additional photocell ing options. Easy installation in new construction or retrofit applications. * Contact factory for other color temperatures and lumen packages. ** L 70 hours are IES TM-- calculated hours. WARRANTY & LISTINGS culus listed for wet locations (-30 C to 40 C / - F to 04 F). IP65 rated. DLC standard approved (except as noted below). *** Complies with FCC Part 5, Class B. Complies with EN60-4-5, surge immunity (V models protected to 4kV & 347-4V models protected to kv). 5-year warranty on all electronics and housing. MOUNTING OPTIONS Trunnion is standard. Slip-fitter provides attachment to poles ( ⅜ O.D. tenon). Steel arm provides secure attachment to flat surfaces. Yoke models are available by special order. Steel Arm DIMENSIONS ⅝ optional yoke Slip-Fitter 9 ⅞ Weight: 9.6 lb. Yoke Mount Option 3 ⅜ ORDERING INFORMATION Examples: (Slip-Fitter, Type III): JGMPAL-T-4K-T3 + JGMPAL-SF-/300 (Yoke, ): JGMPAL-Y-4K (no options available) (Arm, NEMA 7H x 7V) JGMPAL-T-4K + JGMPAL-A-/300 JGMPAL Mounting Type T = Trunnion Y = Yoke Input Voltage 3K = 5K = 3K = 5K = 5K = 5K = Distribution Type ***,43,64,543,58,05,353,354,507,368,368 / Watt Note: For Slip-Fitter or Steel Arm ing, order a luminaire with the standard Trunnion installed (LEDMPAL-T), and either the Slip-Fitter (LEDMPAL-SF-/300) or Steel Arm (LEDMPAL-A- /300). The Slip-Fitter and Steel Arm s are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion. Note: distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the option. 4 6 JGMPAL-SF-/300 Options * (Order Separately) = Slip-Fitter Mount JGMPAL-A-/300 = Steel Arm Mount MPAL//50-FGS = Full Glare Shield MPAL//50-HGS = Half Glare Shield MPAL//50-WG = Wire Guard

5 JGMPAL ELECTRICAL DATA Watt Multi-Purpose LED Area Light JGMPAL-3K-T3 JGMPAL-4K-T3 JGMPAL-5K-T3 JGMPAL-3K JGMPAL-4K JGMPAL-5K JGMPAL-T-4K-T3-4V JGMPAL-T-5K-T3-4V JGMPAL-T-4K-4V JGMPAL-T-5K-4V CRI,43,64,543,58,05,353,354,507,368,368 Per Watt Input Input Current (A) Voltage Power Factor THD 3 L 70 Hours 4 V 40V 77V rendering index. All 50-60Hz. 3 Total harmonic distortion. 4 L 70 refers to the number of hours at which lumen output declines to 70% of the initial level. L 70 hours are IES TM-- calculated hours ,000 65,000 68,000 68,000 PHOTOMETRIC DATA JGMPAL-5K (,543, Type III [T3] Distribution) Foot Candles Notes: Isofootcandle plots depict initial footcandles at grade. Gridlines represent units of ing height of 5 feet. Zone % FL - Front - Low (0-30),430 % FM - Front - Medium (30-60) 4,56 33% FH - Front - High (60-),064 6% FVH - Front - Very High (-90) % Total Forward Light 7,77 6% BL - Back - Low (0-30),356 % BM - Back - Medium (30-60),666 % BH - Back - High (60-) 694 6% BVH - Back - Very High (-90) 8 0% Total Back Light 4,744 38% UL - Up Light - Low (90-) 0% UH - Up Light - High (-) 5 0% Total Up Light 7 0% Total,543 % LEDMPAL-5K (,353, Distribution) Zone % FL - Front - Low (0-30),65 3% FM - Front - Medium (30-60) 3,439 8% FH - Front - High (60-),6 9% FVH - Front - Very High (-90) 35 % Total Forward Light 6,36 5% BL - Back - Low (0-30),564 3% BM - Back - Medium (30-60) 3,4 6% BH - Back - High (60-),08 8% BVH - Back - Very High (-90) 7 % Total Back Light 5,96 48% UL - Up Light - Low (90-) 0% UH - Up Light - High (-) 8 0% Total Up Light 9 0% Total,353 %

6 JGMPAL Watt Multi-Purpose LED Area Light,073,45 3,8 4,9 0 Shields Maximum Candela = 4,9 Horizontal Vertical NEMA Floodlight Type Data Field Angles: Horizontal 68 Vertical 60 NEMA Type: Horizontal Vertical 7H 7V Full Half Wire Guards

7 JGMPAL50 Project: Type: Catalog #: 50 Watt Multi-Purpose LED Area Light standard trunnion STANDARD WET -6kV Surge Protection IP65 TheJGMPAL series is a group of architectural LED area luminaires designed to illuminate parking areas, pathways, building facades, loading docks, and a variety of other general site lighting applications. Multiple ing options make the JGMPAL a versatile luminaire for flood lighting, pole-, ground- and walled area lighting, and other outdoor lighting requirements. FEATURES V models available in (warm white), 4000K (neutral white) and 5000K (cool white) V models available in &. * Long-life LEDs provide hours of operation with at least 70% of initial lumen output (L 70 ). ** Standard optic provides an IES roadway type V distribution, or a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution. Type III models (V) deliver 6,695 lumens & 09 lumens per watt (LPW) at ; and 8,303 lumens & LPW at both and. * Type III models (347-4V) deliver 7,97 lumens & LPW at and 8,67 lumens & LPW at. * models deliver (V) 9,887 lumens & 30 LPW at ; 8,486 lumens & LPW at ; and 8,75 lumens & LPW at. * models (347-4V) deliver 7,57 lumens & LPW ; and 7,99 lumens & LPW at. * Universal or AC voltage (50-60Hz) is standard. 0-0vdc dimming capability is standard. Power factor > Total harmonic distortion. rendering index. Optional glare shields (full & half) & wire guards are available. Die cast aluminum housing with durable, dark bronze powder coat finish, and a heat-resistant polycarbonate lens. Wireway enclosure is sealed with a water-tight, silicon rubber gasket. Effective projected areas (EPA's) are 0.38 square feet (sf, front); 0.30 sf (side) &.04 sf (front). Threaded receptacle (½ NPS) for photocell. Optional arms and slip-fitters provide additional photocell ing options. Easy installation in new construction or retrofit applications. * Contact factory for other color temperatures and lumen packages. ** L 70 hours are IES TM-- calculated hours. WARRANTY & LISTINGS culus listed for wet locations (-30 C to 40 C / - F to 04 F). IP65 rated. DLC standard approved. Complies with FCC Part 5, Class B. Complies with EN60-4-5, surge immunity (V models protected to 6kV & 347-4V models protected to kv). 5-year warranty on all electronics and housing. MOUNTING OPTIONS Trunnion is standard. Slip-fitter provides attachment to poles ( ⅜ O.D. tenon). Steel arm provides secure attachment to flat surfaces. Yoke models are available by special order. Steel Arm DIMENSIONS ⅝ optional yoke Slip-Fitter 9 ⅞ Weight: 9.6 lb. Yoke Mount Option 3 ⅜ ORDERING INFORMATION Examples: (Slip-Fitter, Type III): JGMPAL50-T-4K-T3 + LEDMPAL-SF-/300 (Yoke, ): JGMPAL50-Y-4K (no options available) (Arm, NEMA 7H x 7V) JGMPAL50-T-4K + LEDMPAL-A-/300 JGMPAL50 Mounting Type T = Trunnion Y = Yoke Input Voltage 3K = 5K = 3K = 5K = 5K = 5K = Distribution Type *** 6,695 8,303 8,303 9,887 8,486 8,75 7,97 8,67 7,57 7,99 / Watt Note: For Slip-Fitter or Steel Arm ing, order a luminaire with the standard Trunnion installed (LEDMPAL50-T), and either the Slip-Fitter (LEDMPAL-SF-/300) or Steel Arm (LEDMPAL-A- /300). The Slip-Fitter and Steel Arm s are shipped in separate cartons than the luminaire, and are field-installed after removing the standard Trunnion. Note: distribution is standard, and requires no order suffix (see example above). For NEMA flood 7H x 7V distributions, order the option JGMPAL-SF-/300 Options * (Order Separately) = Slip-Fitter Mount JGMPAL-A-/300 = Steel Arm Mount MPAL//50-FGS = Full Glare Shield MPAL//50-HGS = Half Glare Shield MPAL//50-WG = Wire Guard

8 JGMPAL50 ELECTRICAL DATA 50 Watt Multi-Purpose LED Area Light JGMPAL50-3K-T3 JGMPAL50-4K-T3 JGMPAL50-5K-T3 JGMPAL50-3K JGMPAL50-4K JGMPAL50-5K JGMPAL50-T-4K-T3-4V JGMPAL50-T-5K-T3-4V JGMPAL50-T-4K-4V JGMPAL50-T-5K-4V CRI 6,695 8,303 8,303 9,887 8,486 8,75 7,97 8,67 7,57 7,99 Per Watt Input Input Current (A) Voltage Power Factor THD 3 L 70 Hours 4 V 40V 77V rendering index. All 50-60Hz. 3 Total harmonic distortion. 4 L 70 refers to the number of hours at which lumen output declines to 70% of the initial level. L 70 hours are IES TM-- calculated hours PHOTOMETRIC DATA JGMPAL50-5K (8,303, Type III [T3] Distribution) Foot Candles Notes: Isofootcandle plots depict initial footcandles at grade. Gridlines represent units of ing height of 5 feet. Zone % FL - Front - Low (0-30), % FM - Front - Medium (30-60) 6,330 35% FH - Front - High (60-),860 6% FVH - Front - Very High (-90) 7 % Total Forward Light,48 6% BL - Back - Low (0-30),07 % BM - Back - Medium (30-60) 3,97 % BH - Back - High (60-) 4% BVH - Back - Very High (-90) 3 0% Total Back Light 6,833 37% UL - Up Light - Low (90-) 0% UH - Up Light - High (-) 40 0% Total Up Light 4 0% Total 8,303 % JGMPAL50-5K (8,75, Distribution) Zone % FL - Front - Low (0-30),47 3% FM - Front - Medium (30-60) 5,077 7% FH - Front - High (60-),83 0% FVH - Front - Very High (-90) 86 % Total Forward Light 9,5 5% BL - Back - Low (0-30),338 % BM - Back - Medium (30-60) 4,98 7% BH - Back - High (60-),693 9% BVH - Back - Very High (-90) 70 % Total Back Light 9,8 49% UL - Up Light - Low (90-) 3 0% UH - Up Light - High (-) 45 0% Total Up Light 48 0% Total 8,75 %

9 JGMPAL50 50 Watt Multi-Purpose LED Area Light,56 3, 4,684 6,45 0 Shields Maximum Candela = 6,45 Horizontal Vertical NEMA Floodlight Type Data Field Angles: Horizontal 60 Vertical 63 NEMA Type: Horizontal Vertical 7H 7V Full Half Wire Guards