Bavaria Downs. Chaska, MN. Lighting
|
|
- Maryann Jackson
- 6 years ago
- Views:
Transcription
1 Bavaria Downs Chaska, MN Lighting Jason Kinsella City View Electric, Inc Lake Drive NE Columbus, MN Phone Fax cityviewelectric.com
2 DESCRIPTION Lumark The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard mounting arm, square straight steel pole, anchor bolts, base cover, template and hardware. Stock configurations are available in single and dual fixture combinations. The Prevail luminaire delivers a new level of versatility and value in patent pending, architectural design that delivers energy savings greater than 62% and replaces W metal halide fixtures. The Prevail fixture and pole combo is ideal for general area/site lighting applications. Catalog # Project Comments Prepared by Type Date SPECIFICATION FEATURES Construction Construction is comprised of a heavy-duty, single-piece die-cast aluminum housing in dark bronze polyester powder paint. The diecast aluminum door is tethered to provide easy access to the driver if replacement is required. The optics is mounted on a versatile, aluminum plate that dissipates heat from the LEDs resulting in longer life of the fixture. The fixture is IP66 and 3G vibration rated (ANSI C136.31). Optics Available in Type III and IV distributions with lumen packages ranging from 6,173 to 18,992 nominal lumens. Light engine configurations consist of 1 or 2 high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L92/60,000 hours at 25 C) per IESNA TM-21. For the ultimate level of spill light control, an optional house side shield accessory can be field or factory installed. Electrical Available in V 50/60Hz. 10kV/10kA surge protection standard. 0-10V dimming driver is standard with leads external to the fixture to accommodate controls capability such as dimming and occupancy. Suitable for ambient temperatures from -40 C to 40 C. Controls An integrated dimming and occupancy sensor is available in bi-level dimming (MSP/DIM) operation. Mounting The versatile, patent pending, standard mount arm accommodates multiple drill patterns ranging from 1-1/2 to 4-7/8. Removal of the door on the standard mounting arm enables wiring of the fixture without having to access the driver compartment. A knock-out on the standard mounting arm enables round pole mounting. Pole Shaft is one-piece construction ASTM A500 grade B steel, shot blasted and finished in dark bronze polyester powder coat. Anchor base is fabricated from ASTM grade steel. ASTM A366 steel full base cover is provided to enclose base plate and anchor bolts. Anchor bolts are per ASTM A576 with two nuts, two flat washers, and one lock washer. Hardware and threaded portion of bolt are hot dip galvanized. 3 hook for 3/4 bolt. 4 hook for 1 bolt. Finish Housing and cast parts finished in five-stage super TGIC polyester bronze powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. Warranty Five-year warranty. PFPRV PREVAIL POLE AND FIXTURE COMBO LED POLE AND FIXTURE COMBO DIMENSIONS 2-3/4" [70mm] 13-15/16" [354mm] 26-13/16" [681mm] CERTIFICATION DATA UL and cul Wet Location Listed IP66-Rated 3G Vibration Rated ISO 9001 DesignLights Consortium TM Qualified* POLE MOUNT ARM 6-15/16" [177mm] 1-1/4" [32mm] 4" [102mm] 4-7/8" [124mm] Base View ENERGY DATA Electronic LED Driver 0.9 Power Factor <20% Total Harmonic Distortion V/50 and 60Hz, 347V/60Hz, 480V/60Hz -40 C Minimum Temperature Rating +40 C Ambient Temperature Rating 4-15/16" [125mm] 3-3/4" [96mm] 9/16" [15mm] Dia. Hole 4-5 EPA Effective Projected Area (Sq. Ft.): 0.75 (1 fixture) SHIPPING DATA Approximate Net Weight: 20lbs. [9.09 kgs.] (1 fixture) SYSTEMS * C E R T I F I E D TD500029EN :12:50
3 PFPRV PREVAIL POLE AND FIXTURE COMBO ORDERING INFORMATION Sample Number: PFPRV-1-A25-T3-15-N/AB 1, 2, 3 Number Series of Fixtures Light Engine Distribution Pole Height Maximum Wind Zone (MPH) Options (Add as Suffix) Accessories (Order Separately) PFPRV=Prevail Prevail Pole and Fixture Combo 1=1 2=2 3=3 4=4 A15=(1 LED) 6,100 Nominal Lumens A25=(2 LED) 10,200 Nominal Lumens A40=(2 LED) 15,100 Nominal Lumens A60=(2 LED) 18,900 Nominal Lumens T3=Type III T4=Type T e IV 15=15' 20=20' 25=25' 30=30' Blank=80 9=90 0=100 N/AB= No Anchor Bolts (Used when ordered separately) HSS= House Side Shield MSP/DIM-L12= Integrated Sensor for Dimming Operation, 8' - 12' Mounting Height MSP/DIM-L30= Integrated Sensor for Dimming Operation, 12' - 30' Mounting Height PER= NEMA 3PIN Twistlock Photocontrol Receptacle 4 PER7= NEMA 7PIN Twistlock Photocontrol Receptacle 4 HS/VERD= House Side Shield NOTES: K CCT, standard bronze, V, 0-10V dimming. 2 Standard mount arm included with fixture. Supplied with straight steel shaft, anchor bolts, template, base cover and hardware. 3 DesignLights ConsortiumTM Qualified and classified for DLC standard, refer to for details. 4 Not available with MSP options. POWER AND LUMENS LUMEN MAINTENANCE Light Engine A15 A25 A40 A60 Nominal Power (Watts) 57W 87W 143W 163W Input 120V (A) Input 277V (A) Input 347V (A) Input 480V (A) Lumens 6,139 10,204 15,073 18,830 Type II BUG Rating B1-U0-G1 B2-U0-G2 B3-U0-G3 B3-U0-G3 Lumens 6,192 10,292 15,203 18,992 Type III BUG Rating B1-U0-G2 B2-U0-G3 B2-U0-G3 B3-U0-G4 Lumens 6,173 10,261 15,157 18,935 Type IV BUG Rating B1-U0-G3 B2-U0-G3 B2-U0-G4 B2-U0-G5 Lumens 6,393 10,627 15,697 19,610 Type V BUG Rating B3-U0-G3 B4-U0-G3 B4-U0-G4 B5-U0-G4 Ambient Temperature 25,000 Hours* 50,000 Hours* 60,000 Hours* Theoretical 100,000 Hours Theoretical L70 (Hours)* 25ºC > 96% > 93% > 92% > 87% > 260,000 40ºC > 96% > 93% > 92% > 87% > 255,000 50ºC > 95% > 92% > 91% > 86% > 250,000 * Per IESNA TM-21 data. LUMEN MULTIPLIER Ambient Temperature Lumen Multiplier 10ºC ºC ºC ºC 0.99 NOTE: Lumen output for standard bronze fixture color. Different housing colors impact lumen output. IES files for the non-standard colors are available upon request. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
4 PFPRV PREVAIL POLE AND FIXTURE COMBO ONE FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90 AND 100MPH WIND ZONES USE A 5" POLE) EPA=0.75 T3=18,992 T4=18,935 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) HID Equivalent (Wattage) 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for stocked configurations and availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
5 PFPRV PREVAIL POLE AND FIXTURE COMBO TWO FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 100MPH WIND ZONE USE 5" POLES) EPA=1.50 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) HID Equivalent (Wattage) 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for stocked configurations and availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
6 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) PFPRV PREVAIL POLE AND FIXTURE COMBO THREE FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 90, 100MPH WIND ZONE USE 5" POLES) EPA=2.25 HID Equivalent (Wattage) 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
7 PFPRV PREVAIL POLE AND FIXTURE COMBO FOUR FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 100MPH WIND ZONE USE 5" POLES) EPA=3.00 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) HID Equivalent (Wattage) 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
8 DESCRIPTION Lumark The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard mounting arm, square straight steel pole, anchor bolts, base cover, template and hardware. Stock configurations are available in single and dual fixture combinations. The Prevail luminaire delivers a new level of versatility and value in patent pending, architectural design that delivers energy savings greater than 62% and replaces W metal halide fixtures. The Prevail fixture and pole combo is ideal for general area/site lighting applications. Catalog # Project Comments Prepared by Type Date SPECIFICATION FEATURES Construction Construction is comprised of a heavy-duty, single-piece die-cast aluminum housing in dark bronze polyester powder paint. The diecast aluminum door is tethered to provide easy access to the driver if replacement is required. The optics is mounted on a versatile, aluminum plate that dissipates heat from the LEDs resulting in longer life of the fixture. The fixture is IP66 and 3G vibration rated (ANSI C136.31). Optics Available in Type III and IV distributions with lumen packages ranging from 6,173 to 18,992 nominal lumens. Light engine configurations consist of 1 or 2 high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L92/60,000 hours at 25 C) per IESNA TM-21. For the ultimate level of spill light control, an optional house side shield accessory can be field or factory installed. Electrical Available in V 50/60Hz. 10kV/10kA surge protection standard. 0-10V dimming driver is standard with leads external to the fixture to accommodate controls capability such as dimming and occupancy. Suitable for ambient temperatures from -40 C to 40 C. Controls An integrated dimming and occupancy sensor is available in bi-level dimming (MSP/DIM) operation. Mounting The versatile, patent pending, standard mount arm accommodates multiple drill patterns ranging from 1-1/2 to 4-7/8. Removal of the door on the standard mounting arm enables wiring of the fixture without having to access the driver compartment. A knock-out on the standard mounting arm enables round pole mounting. Pole Shaft is one-piece construction ASTM A500 grade B steel, shot blasted and finished in dark bronze polyester powder coat. Anchor base is fabricated from ASTM grade steel. ASTM A366 steel full base cover is provided to enclose base plate and anchor bolts. Anchor bolts are per ASTM A576 with two nuts, two flat washers, and one lock washer. Hardware and threaded portion of bolt are hot dip galvanized. 3 hook for 3/4 bolt. 4 hook for 1 bolt. Finish Housing and cast parts finished in five-stage super TGIC polyester bronze powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. Warranty Five-year warranty. PFPRV PREVAIL POLE AND FIXTURE COMBO LED POLE AND FIXTURE COMBO DIMENSIONS 2-3/4" [70mm] 13-15/16" [354mm] 26-13/16" [681mm] CERTIFICATION DATA UL and cul Wet Location Listed IP66-Rated 3G Vibration Rated ISO 9001 DesignLights Consortium TM Qualified* POLE MOUNT ARM 6-15/16" [177mm] 1-1/4" [32mm] 4" [102mm] 4-7/8" [124mm] Base View ENERGY DATA Electronic LED Driver 0.9 Power Factor <20% Total Harmonic Distortion V/50 and 60Hz, 347V/60Hz, 480V/60Hz -40 C Minimum Temperature Rating +40 C Ambient Temperature Rating 4-15/16" [125mm] 3-3/4" [96mm] 9/16" [15mm] Dia. Hole 4-5 EPA Effective Projected Area (Sq. Ft.): 0.75 (1 fixture) SHIPPING DATA Approximate Net Weight: 20lbs. [9.09 kgs.] (1 fixture) SYSTEMS * C E R T I F I E D TD500029EN :12:50
9 PFPRV PREVAIL POLE AND FIXTURE COMBO ORDERING INFORMATION Sample Number: PFPRV-1-A25-T3-15-N/AB 1, 2, 3 Number Series of Fixtures Light Engine Distribution Pole Height Maximum Wind Zone (MPH) Options (Add as Suffix) Accessories (Order Separately) PFPRV=Prevail Prevail Pole and Fixture Combo 1=1 2=2 3=3 4=4 A15=(1 LED) 6,100 Nominal Lumens A25=(2 LED) 10,200 Nominal Lumens A40=(2 LED) 15,100 Nominal Lumens A60=(2 LED) 18,900 Nominal Lumens T3=Type III T4=Type T e IV 15=15' 20=20' 25=25' 30=30' Blank=80 9=90 0=100 N/AB= No Anchor Bolts (Used when ordered separately) HSS= House Side Shield MSP/DIM-L12= Integrated Sensor for Dimming Operation, 8' - 12' Mounting Height MSP/DIM-L30= Integrated Sensor for Dimming Operation, 12' - 30' Mounting Height PER= NEMA 3PIN Twistlock Photocontrol Receptacle 4 PER7= NEMA 7PIN Twistlock Photocontrol Receptacle 4 HS/VERD= House Side Shield NOTES: K CCT, standard bronze, V, 0-10V dimming. 2 Standard mount arm included with fixture. Supplied with straight steel shaft, anchor bolts, template, base cover and hardware. 3 DesignLights ConsortiumTM Qualified and classified for DLC standard, refer to for details. 4 Not available with MSP options. POWER AND LUMENS LUMEN MAINTENANCE Light Engine A15 A25 A40 A60 Nominal Power (Watts) 57W 87W 143W 163W Input 120V (A) Input 277V (A) Input 347V (A) Input 480V (A) Lumens 6,139 10,204 15,073 18,830 Type II BUG Rating B1-U0-G1 B2-U0-G2 B3-U0-G3 B3-U0-G3 Lumens 6,192 10,292 15,203 18,992 Type III BUG Rating B1-U0-G2 B2-U0-G3 B2-U0-G3 B3-U0-G4 Lumens 6,173 10,261 15,157 18,935 Type IV BUG Rating B1-U0-G3 B2-U0-G3 B2-U0-G4 B2-U0-G5 Lumens 6,393 10,627 15,697 19,610 Type V BUG Rating B3-U0-G3 B4-U0-G3 B4-U0-G4 B5-U0-G4 Ambient Temperature 25,000 Hours* 50,000 Hours* 60,000 Hours* Theoretical 100,000 Hours Theoretical L70 (Hours)* 25ºC > 96% > 93% > 92% > 87% > 260,000 40ºC > 96% > 93% > 92% > 87% > 255,000 50ºC > 95% > 92% > 91% > 86% > 250,000 * Per IESNA TM-21 data. LUMEN MULTIPLIER Ambient Temperature Lumen Multiplier 10ºC ºC ºC ºC 0.99 NOTE: Lumen output for standard bronze fixture color. Different housing colors impact lumen output. IES files for the non-standard colors are available upon request. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
10 PFPRV PREVAIL POLE AND FIXTURE COMBO ONE FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90 AND 100MPH WIND ZONES USE A 5" POLE) EPA=0.75 T3=18,992 T4=18,935 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) HID Equivalent (Wattage) 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 6,192 Type III PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 6,173 Type IV PFPRV-1-A15-T PFPRV-1-A15-T PFPRV-1-A15-T W 10,292 Type III PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 10,261 Type IV PFPRV-1-A25-T PFPRV-1-A25-T PFPRV-1-A25-T W 15,203 Type III PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 15,157 Type IV PFPRV-1-A40-T PFPRV-1-A40-T PFPRV-1-A40-T W 18,992 Type III PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W 18,935 Type IV PFPRV-1-A60-T PFPRV-1-A60-T PFPRV-1-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for stocked configurations and availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
11 PFPRV PREVAIL POLE AND FIXTURE COMBO TWO FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 100MPH WIND ZONE USE 5" POLES) EPA=1.50 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) HID Equivalent (Wattage) 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 6,192 Type III PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 6,173 Type IV PFPRV-2-A15-T PFPRV-2-A15-T PFPRV-2-A15-T W 10,292 Type III PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 10,261 Type IV PFPRV-2-A25-T PFPRV-2-A25-T PFPRV-2-A25-T W 15,203 Type III PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 15,157 Type IV PFPRV-2-A40-T PFPRV-2-A40-T PFPRV-2-A40-T W 18,992 Type III PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W 18,935 Type IV PFPRV-2-A60-T PFPRV-2-A60-T PFPRV-2-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for stocked configurations and availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
12 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) PFPRV PREVAIL POLE AND FIXTURE COMBO THREE FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 90, 100MPH WIND ZONE USE 5" POLES) EPA=2.25 HID Equivalent (Wattage) 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 6,192 Type III PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 6,173 Type IV PFPRV-3-A15-T PFPRV-3-A15-T PFPRV-3-A15-T W 10,292 Type III PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 10,261 Type IV PFPRV-3-A25-T PFPRV-3-A25-T PFPRV-3-A25-T W 15,203 Type III PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 15,157 Type IV PFPRV-3-A40-T PFPRV-3-A40-T PFPRV-3-A40-T W 18,992 Type III PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W 18,935 Type IV PFPRV-3-A60-T PFPRV-3-A60-T PFPRV-3-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
13 PFPRV PREVAIL POLE AND FIXTURE COMBO FOUR FIXTURE CONFIGURATION (30FT CONFIGURATIONS WITH 80, 90, 100MPH WIND ZONES AND 25FT CONFIGURATIONS WITH 100MPH WIND ZONE USE 5" POLES) EPA=3.00 Mounting Height (Feet) 15' 20' 25' 30' Lumens (Nominal) Distribution Maximum Wind Zone (MPH) HID Equivalent (Wattage) 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 6,192 Type III PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 6,173 Type IV PFPRV-4-A15-T PFPRV-4-A15-T PFPRV-4-A15-T W 10,292 Type III PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 10,261 Type IV PFPRV-4-A25-T PFPRV-4-A25-T PFPRV-4-A25-T W 15,203 Type III PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 15,157 Type IV PFPRV-4-A40-T PFPRV-4-A40-T PFPRV-4-A40-T W 18,992 Type III PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W 18,935 Type IV PFPRV-4-A60-T PFPRV-4-A60-T PFPRV-4-A60-T W NOTES: 1. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional support information. 2. Supplied with 4A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 15' combo SS4A15SFM4, 20' combo SS4A20SFM4, and 25' combo SS4A25SFM4. 3. Supplied with 5A Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 25' combo SS5A25SFM4 and 30' combo SS5A30SFM4. 4. Supplied with 5M Square Straight Steel Shaft (SSS), Anchor Bolts (AB1), Template (TMP1), hardware and base cover. 30' combo SS5M30SFM4. 5. Refer to In Stock Guide for availability. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD500029EN :12:50
14 DESCRIPTION Lumark The patented Lumark Crosstour MAXX LED wall pack series of luminaries provides low-profile architectural style with super bright, energy-efficient LEDs. The rugged die-cast aluminum construction, back box with secure lock hinges, stainless steel hardware along with a sealed and gasketed optical compartment make Crosstour impervious to contaminants. The Crosstour MAXX wall luminaire is ideal for wall/ surface, inverted mount for facade/canopy illumination, perimeter and site lighting. Typical applications include pedestrian walkways, building entrances, multi-use facilities, industrial facilities, perimeter parking areas, storage facilities, institutions, schools and loading docks. Catalog # Project Comments Prepared by Type Date SPECIFICATION FEATURES Construction Low-profile LED design with rugged one-piece, die-cast aluminum back box and hinged removable door. Matching housing styles incorporate both a full cutoff and refractive lens design. Full cutoff and refractive lens models are available in 58W, 81W and 102W. Patent pending secure lock hinge feature allows for safe and easy tool-less electrical connections with the supplied push-in connectors. Back box includes four 1/2 NPT threaded conduit entry points. The back box is secured by four lag bolts (supplied by others). External fin design extracts heat from the fixture surface. One-piece silicone gasket seals door and back box. Not recommended for car wash applications. Optical Silicone sealed optical LED chamber incorporates a custom engineered reflector providing high-efficiency illumination. Full cutoff models integrate an impactresistant molded refractive prism optical lens assembly meeting requirements for Dark Sky compliance. Refractive lens models incorporate a molded lens DIMENSIONS assembly designed for maximum forward throw. Solid state LED Crosstour MAXX luminaries are thermally optimized with eight lumen packages in cool 5000K, neutral 4000K, or warm 3000K LED color temperature (CCT). Electrical LED driver is mounted to the die-cast aluminum housing for optimal heat sinking. LED thermal management system incorporates both conduction and natural convection to transfer heat rapidly away from the LED source. 58W, 81W and 102W models operate in -40 C to 40 C [-40 F to 104 F]. High ambient 50 C [122 F] models available in 58W and 81W models only. Crosstour MAXX luminaires maintain greater than 89% of initial light output after 72,000 hours of operation. Four half-inch NPT threaded conduit entry points allow for thru-branch wiring. Back box is an authorized electrical wiring compartment. Integral LED electronic driver incorporates surge protection V 50/60Hz, 480V 60Hz, or 347V 60Hz electrical operation. 480V is compatible for use with 480V Wye systems only. Emergency Egress Optional integral cold weather battery emergency egress includes emergency operation test switch (available in 58W and 81W models only), an AC-ON indicator light and a premium extended rated sealed maintenance-free nickel-metal hydride battery pack. The separate emergency lighting LEDs are wired to provide redundant emergency lighting. Listed to UL Standard 924, Emergency Lighting. Area and Site Pole Mounting Optional extruded aluminum 6-1/2 arm features internal bolt guides for supplied twin support rods, allowing for easy positioning of the fixture during installation to pole. Supplied with round plate adapter plate. Optional tenon adapter fits 2-3/8 or 3-1/2 O.D. Tenon. Finish Crosstour MAXX is protected with a super TGIC carbon bronze or summit white polyester powder coat paint. Super TGIC powder coat paint finishes withstand extreme climate conditions while providing optimal color and gloss retention of the installed life. Warranty Five-year warranty. XTOR CROSSTOUR MAXX LED APPLICATIONS: WALL / SURFACE INVERTED SITE LIGHTING FULL CUTOFF DEEP BACK BOX REFRACTIVE LENS DEEP BACK BOX 11" [279mm] 11" [279mm] 8-3/4" [222mm] 6-1/4" [159mm] OPTIONAL POLE MOUNT ARM 7" [178mm] ARM DRILLING 8-3/4" [222mm] 6" [152mm] ESCUTCHEON PLATES 7" [178mm] CERTIFICATION DATA UL/cUL Wet Location Listed LM79 / LM80 Compliant ROHS Compliant NOM Compliant Models 3G Vibration Tested UL924 Listed (CBP Models) IP66 Rated DesignLights Consortium Qualified* 13-1/2" [343mm] 6-1/2" [165mm] 4-1/2" [114mm] TYPE "C" 2-5/8" [67mm] 3/4" [19mm] Dia. Hole 3" [77mm] 1-1/2" [39mm] (2) 9/16" [15mm] Dia. Holes 19-1/4" [489mm] 19-1/4" [489mm] TECHNICAL DATA 40 C Ambient Temperature External Supply Wiring 90 C Minimum EPA Effective Projected Area (Sq. Ft.): XTOR6B, XTOR8B, XTOR12B=0.54 With Pole Mount Arm=0.98 SHIPPING DATA: Approximate Net Weight: lbs. [ kgs.] * TD514005EN :46:15
15 POWER AND LUMENS BY FIXTURE MODEL XTOR CROSSTOUR MAXX LED 58W Series LED Information XTOR6B XTOR6BRL XTOR6B-W XTOR6BRL-W XTOR6B-Y XTOR6BRL-Y Delivered Lumens 6,129 6,225 6,038 6,133 5,611 5,826 B.U.G. Rating B1-U0-G1 B2-U4-G3 B1-U0-G1 B2-U4-G3 B1-U0-G1 B2-U4-G3 CCT (Kelvin) 5000K 5000K 4000K 4000K 3000K 3000K CRI (Color Rendering Index) Power Consumption (Watts) 58W 58W 58W 58W 58W 58W 81W Series LED Information XTOR8B XTOR8BRL XTOR8B-W XTOR8BRL-W XTOR8B-Y XTOR8BRL-Y Delivered Lumens 8,502 8,635 8,373 8,504 7,748 8,079 B.U.G. Rating B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 CCT (Kelvin) 5000K 5000K 4000K 4000K 3000K 3000K CRI (Color Rendering Index) Power Consumption (Watts) 81W 81W 81W 81W 81W 81W 102W Series LED Information XTOR12B XTOR12BRL XTOR12B-W XTOR12BRL-W XTOR12B-Y XTOR12BRL-Y Delivered Lumens 12,728 13,458 12,539 13,258 11,861 12,595 B.U.G. Rating B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 B2-U0-G1 B2-U4-G3 CCT (Kelvin) 5000K 5000K 4000K 4000K 3000K 3000K CRI (Color Rendering Index) Power Consumption (Watts) 102W 102W 102W 102W 102W 102W EGRESS Information XTOR6B, XTOR8B and XTOR12B Full Cutoff CBP Egress LED XTOR6B, XTOR8B and XTOR12B Refractive Lens CBP Egress LED Delivered Lumens B.U.G. Rating N.A. N.A. CCT (Kelvin) 4000K 4000K CRI (Color Rendering Index) Power Consumption (Watts) 1.8W 1.8W LUMEN MAINTENANCE Ambient Temperature TM-21 Lumen Maintenance (72,000 Hours) Theoretical L70 (Hours) XTOR6B Model 25 C > 90% 246, C > 88% 217, C > 88% 201,000 XTOR8B Model 25 C > 89% 219, C > 87% 195, C > 86% 181,000 XTOR12B Model 25 C > 89% 222, C > 87% 198,000 Lumen Maintenance (Percent) Hours (Thousands) 40 C 25 C CURRENT DRAW Voltage XTOR6B XTOR8B XTOR12B Model Series XTOR6B-CBP (Fixture/Battery) XTOR8B-CBP (Fixture/Battery) 120V / / V V V / / V V Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD514005EN :46:15
16 ORDERING INFORMATION XTOR CROSSTOUR MAXX LED Sample Number: XTOR6B-W-WT-PC1 Series 1 LED Kelvin Color Housing Color Options (Add as Suffix) Full Cutoff XTOR6B=58W XTOR8B=81W XTOR12B=102W Refractive Lens XTOR6BRL=58W XTOR8BRL=81W XTOR12BRL=102W [Blank]= Bright White (Standard) 5000K W=Neutral, 4000K Y=Warm, 3000K [Blank]=Carbon Bronze (Standard) WT=Summit White BK=Black BZ=Bronze AP=Grey GM=Graphite Metallic DP=Dark Platinum 2, 3, 4, 5 347V=347V 2, 3, 4, 5, 6 480V=480V PC1=Photocontrol 120V 7 PC2=Photocontrol V 7, 8 PMA=Pole Mount Arm (C Drilling) with Round Adapter 3, 9 2, 3, 10, 11 MS-L20=Motion Sensor for ON/OFF Operation MS/DIM-L20=Motion Sensor for Dimming Operation 2, 3, 11, 15, 17 CBP=Cold Weather Battery Pack HA=50ºC High Ambient 17 2, 3, 10, 11, 12, 13, 14 Accessories (Order Separately) WG-XTORMX=Crosstour MAXX Wire Guard PB120V=Field Installed 120V Photocontrol PB277V BUTTON PC=Field Installed V Photocontrol 8 VA1040-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1041-XX=2@180 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1042-XX=3@120 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1043-XX=4@90 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1044-XX=2@90 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1045-XX=3@90 Tenon Adapter for 3-1/2" O.D. Tenon 16 VA1046-XX=2@120 Tenon Adapter for 3-1/2 O.D. Tenon 16 VA1033-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1034-XX=2@180 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1035-XX=3@120 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1036-XX=4@90 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1037-XX=2@90 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1038-XX=3@90 Tenon Adapter for 2-3/8" O.D. Tenon 16 VA1039-XX=2@120 Tenon Adapter for 2-3/8" O.D. Tenon 16 EWP/XTORMX=Escutcheon Wall Plate, Carbon Bronze EWP/XTORMX-WT=Escutcheon Wall Plate, Summit White FSIR-100=Wireless Configuration Tool for Occupancy Sensor 14 NOTES: 1. DesignLights Consortium Qualified and classified for both DLC Standard and DLC Premium, refer to for details. 2. Not available with HA option. 3. Deep back box is standard for 347V, 480V, CBP, PMA, MS-L20 and MS/DIM-L Not available with CBP option. 5. Thru-branch wiring not available with HA option or with 347V. 6. Only for use with 480V Wye systems. Per NEC, not for use with ungrounded systems, impedance grounded systems or corner grounded systems (commonly known as Three Phase Three Wire Delta, Three Phase High Leg Delta and Three Phase Corner Grounded Delta systems). 7. Not available with MS-L20 and MS/DIM-L20 options. 8. Use PC2 with 347V or 480V option for photocontrol. Factory wired to V lead. 9. Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to our white paper WP513001EN for additional support information. 10. For use in downlight orientation only. Optimal coverage at mounting heights of 9'-20' V thru 277V only. 12. Factory set to 50% power reduction after 15-minutes of inactivity. Dimming driver included. 13. Includes integral photo sensor. 14. The FSIR-100 configuration tool is required to adjust parameters including high and low modes, sensitivity, time delay, cutoff, and more. Consult your lighting representative at Eaton for more information. 15. Operating temperatures -20 C to 25 C. 16. Replace XX with housing color. 17. Not available in XTOR12B or XTOR12BRL models. STOCK ORDERING INFORMATION 58W Series 81W Series 102W Series Full Cutoff XTOR6B=58W, 5000K, Carbon Bronze XTOR8B=81W, 5000K, Carbon Bronze XTOR12B=102W, 5000K, Carbon Bronze XTOR6B-PC1=58W, 5000K, 120V PC, Carbon Bronze XTOR8B-PC1=81W, 5000K, 120V PC, Carbon Bronze XTOR12B-PC1=102W, 5000K, 120V PC, Carbon Bronze XTOR6B-WT= 58W, 5000K, Summit White XTOR8B-WT=81W, 5000K, Summit White XTOR12B-WT=102W, 5000K, Summit White XTOR6B-W=58W, 4000K, Carbon Bronze XTOR8B-PC2=81W, 5000K, V PC, Carbon Bronze XTOR12B-PC2=102W, 5000K, V PC, Carbon Bronze XTOR6B-PMA= 58W, 5000K, Pole Mount Arm, Carbon Bronze XTOR6B-W-PMA= 58W, 4000K, Pole Mount Arm, Carbon Bronze XTOR8B-PMA= 81W, 5000K, Pole Mount Arm, Carbon Bronze XTOR8B-W= 81W, 4000K, Carbon Bronze XTOR12B-PMA= 102W, 5000K, Pole Mount Arm, Carbon Bronze XTOR12B-W=102W, 4000K, Carbon Bronze XTOR6B-PC2= 58W, 5000K, V PC, Carbon Bronze XTOR8B-W-PC1= 81W, 4000K, 120V PC, Carbon Bronze XTOR12B-W-PC1=102W, 4000K, 120V PC, Carbon Bronze XTOR6B-W-PC2=58W, 4000K, V PC, Carbon Bronze XTOR6B-W-PC1=58W, 4000K, 120V PC, Carbon Bronze XTOR8B-W-PC2= 81W, 4000K, V PC, Carbon Bronze XTOR8B-W-PMA= 81W,4000K, Pole Mount Arm, Carbon Bronze XTOR12B-W-PC2= 102W, 4000K, V PC, Carbon Bronze XTOR12B-W-PMA= 102W,4000K, Pole Mount Arm, Carbon Bronze Refractive Lens XTOR6BRL=58W, 5000K, Refractive Lens, Carbon Bronze XTOR8BRL= 81W, 5000K, Refractive Lens, Carbon Bronze XTOR12BRL=102W, 5000K, Refractive Lens, Carbon Bronze XTOR6BRL-PC1= 58W, 5000K, Refractive Lens, 120V PC, Carbon Bronze XTOR6BRL-WT= 58W, 5000K, Refractive Lens, Summit White XTOR6BRL-W= 58W, 4000K, Refractive Lens, Carbon Bronze XTOR8BRL-PC1= 81W, 5000K, Refractive Lens, 120V PC, Carbon Bronze XTOR8BRL-WT= 81W, 5000K, Refractive Lens, Summit White XTOR8BRL-PC2= 81W, 5000K, Refractive Lens, V PC, Carbon Bronze XTOR12BRL-PC1= 102W, 5000K, Refractive Lens, 120V PC, Carbon Bronze XTOR2BRL-WT= 102W, 5000K, Refractive Lens, Summit White XTOR12BRL-PC2= 102W, 5000K, Refractive Lens, V PC, Carbon Bronze XTOR6BRL-PMA= 58W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR6BRL-W-PMA= 58W,4000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR6BRL-PC2= 58W, 5000K, Refractive Lens, V PC, Carbon Bronze XTOR6BRL-W-PC2= 58W, 4000K, Refractive Lens, V PC, Carbon Bronze XTOR6BRL-W-PC1= 58W, 4000K, Refractive Lens, 120V PC, Carbon Bronze XTOR8BRL-PMA= 81W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR8BRL-W= 81W, 4000K, Refractive Lens, Carbon Bronze XTOR8BRL-W-PC1= 81W, 4000K, Refractive Lens, 120V PC, Carbon Bronze XTOR8BRL-W-PC2= 81W, 4000K, Refractive Lens, V PC, Carbon Bronze XTOR8BRL-W-PMA= 81W,4000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR12BRL-PMA= 102W, 5000K, Refractive Lens, Pole Mount Arm, Carbon Bronze XTOR12BRL-W= 102W, 4000K, Refractive Lens, Carbon Bronze XTOR12BRL-W-PC1= 102W, 4000K, Refractive Lens, 120V PC, Carbon Bronze XTOR12BRL-W-PC2= 102W, 4000K, Refractive Lens, V PC, Carbon Bronze XTOR12BRL-W-PMA= 102W,4000K, Refractive Lens, Pole Mount Arm, Carbon Bronze Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice. TD514005EN :46:15
17 American Revolution Full Cutoff LED Series 247CL P R O D U C T O V E R V I E W SERIES 247CL Applications: Streetscapes Walkways Pathways Parks Features: Die-cast aluminum housing and hood for long-life performance Die-cast trigger latch (TL) and captive thumb screws option available for easy access to internal components Optical assembly designed for maximum performance, available in Type II, Type III and Type V Hinged hood and captive thumb screws provision afford quick, easy access to electrical and optical area for servicing Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or 3" O.D. Surge protection device (standard) exceeds ANSI C62.41 Category C1 criteria (surge tested at 10kV/5kA) Complies with ANSI: C136.2, C136.10, C CSA listed and suitable for up to 30 C ambient Rated L70, LED life greater than 100,000 hours at 25 C Replaces up to 150W HPS light source incumbant models LED electronic 0V-10V dimmable driver DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. DIMENSIONS 16.8 (427) 3.73 Cupola height P3 without ROAM Shown in line diagram 23.6 (600) Cupola height P5/P7 without ROAM Cupola height P5/P7 with ROAM Effective Projected Area (EPA) The EPA for the American Revolution Series 247CL is 1.0 sq. ft. P5 or P7 option total height is 24.9 (633). Approx. Wt. = 36 lbs. All dimensions are inches (millimeters) unless otherwise noted. Note: Specifications subject to change without notice. American Revolution Full Cutoff Series 247CL LED
18 O R D E R I N G I N F O R M A T I O N American Revolution Full Cutoff LED Series 247CL Example: 247CL 20LEDE70 MVOLT 4K R3 Series Performance Package Voltage Color Temperature (CCT) 247CL American Revolution Full Cutoff LED 20LEDE10 20 Chips, 1050 ma Driver, 73 input watts MVOLT Multi-volt, V 3K 3000K 20LEDE70 20 Chips, 700 ma Driver, 46 input watts V 4K 4000K 10LEDE10 10 Chips, 1050 ma Driver, 39 input watts V 5K 5000K 10LEDE70 10 Chips, 700 ma Driver, 26 input watts 10LEDE53 10 Chips, 525 ma Driver, 19 input watts 10LEDE35 10 Chips, 350 ma Driver, 14 input watts Distribution Options R2 R3 R5 Type II Type III Type V Paint 1 (blank) GY DDB WH BZ Black (standard) Gray Dark Bronze White Bronze Photocontrol (blank) 3 pin NEMA Photocontrol Receptacle (standard) NR 2 No Photocontrol Receptacle P5 3 5 pin NEMA Photocontrol Receptacle (dimmable driver included) P7 3 7 pin NEMA Photocontrol Receptacle (dimmable driver included) PCLL 4,5 Solid State Long Life Photocontrol PCSS 4,5,6 Not CSA Listed Solid State Long Life Photocontrol ( V) P3 Receptacle Selection Non-ROAM Control Blank Cupola size based on type of control and receptacle P5/P7 Receptacle Selection Non-ROAM Control P5 or P P5/P7 Receptacle Selection ROAM Control RNC is required with: P5 + RCC or P7 + RCC Miscellaneous SS Stainless steel hardware NL NEMA Label XL Not CSA Listed TL Tool-less Entry LDR 7 Ladder Rest SH Shorting Cap SHX 6 Not CSA Listed Shorting Cap HSS House Side Shield CR Enhanced Corrosion Resistant Finish RCC 8 ROAM Dimming Node Cupola Cover Accessories RNC57 3 ROAM Dimming Node Cupola Cover Notes: 1. Other colors available, please contact factory 2. PC and SH not available with NR option 3. Taller cupola cover (RCC) is required when used with ROAM or other similar wireless monitoring control systems 4. Standard failure mode= Fail On 5. Photocontrols supplied with ANSI Standard Turn-On levels 6. XL option is required 7. Ships with unit, field installed 8. Required when using ROAM or other similar wireless monitoring control systems AEL Headquarters, 3825 Columbus Road, Granville, OH Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.
19 O P E R A T I N G C H A R A C T E R I S T I C S DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. TOTAL LUMENS LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 6, , , LEDE10 4K 73 6, , , LEDE10 5K 73 6, , , LEDE70 3K 46 4, , , LEDE70 4K 46 5, , , LEDE70 5K 46 5, , , LEDE10 3K 39 3, , , LEDE10 4K 39 3, , , LEDE10 5K 39 3, , , LEDE70 3K 26 2, , , LEDE70 4K 26 2, , , LEDE70 5K 26 2, , , LEDE53 3K 19 1, , , LEDE53 4K 19 2, , , LEDE53 5K 19 2, , , LEDE35 3K 14 1, , , LEDE35 4K 14 1, , , LEDE35 5K 14 1, , , American Revolution Full Cutoff LED Series 247CL DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. TOTAL LUMENS w/hss (HOUSE SIDE SHIELD) LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 5, , , LEDE10 4K 73 5, , , LEDE10 5K 73 5, , , LEDE70 3K 46 3, , , LEDE70 4K 46 4, , , LEDE70 5K 46 4, , , LEDE10 3K 39 2, , , LEDE10 4K 39 3, , , LEDE10 5K 39 3, , , LEDE70 3K 26 2, , , LEDE70 4K 26 2, , , LEDE70 5K 26 2, , , LEDE53 3K 19 1, , , LEDE53 4K 19 1, , , LEDE53 5K 19 1, , , LEDE35 3K 14 1, , , LEDE35 4K 14 1, , , LEDE35 5K 14 1, , , AEL Headquarters, 3825 Columbus Road, Granville, OH Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.
20
21 -- _
22 1 American Revolution Full Cutoff LED Series 247CL P R O D U C T O V E R V I E W SERIES 247CL Applications: Streetscapes Walkways Pathways Parks Features: Die-cast aluminum housing and hood for long-life performance Die-cast trigger latch (TL) and captive thumb screws option available for easy access to internal components Optical assembly designed for maximum performance, available in Type II, Type III and Type V Hinged hood and captive thumb screws provision afford quick, easy access to electrical and optical area for servicing Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or 3" O.D. Surge protection device (standard) exceeds ANSI C62.41 Category C1 criteria (surge tested at 10kV/5kA) Complies with ANSI: C136.2, C136.10, C CSA listed and suitable for up to 30 C ambient Rated L70, LED life greater than 100,000 hours at 25 C Replaces up to 150W HPS light source incumbant models LED electronic 0V-10V dimmable driver DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. DIMENSIONS 16.8 (427) 3.73 Cupola height P3 without ROAM Shown in line diagram 23.6 (600) Cupola height P5/P7 without ROAM Cupola height P5/P7 with ROAM Effective Projected Area (EPA) The EPA for the American Revolution Series 247CL is 1.0 sq. ft. P5 or P7 option total height is 24.9 (633). Approx. Wt. = 36 lbs. All dimensions are inches (millimeters) unless otherwise noted. Note: Specifications subject to change without notice. American Revolution Full Cutoff Series 247CL LED
23 O R D E R I N G I N F O R M A T I O N American Revolution Full Cutoff LED Series 247CL Example: 247CL 20LEDE70 MVOLT 4K R3 Series Performance Package Voltage Color Temperature (CCT) 247CL American Revolution Full Cutoff LED 20LEDE10 20 Chips, 1050 ma Driver, 73 input watts MVOLT Multi-volt, V 3K 3000K 20LEDE70 20 Chips, 700 ma Driver, 46 input watts V 4K 4000K 10LEDE10 10 Chips, 1050 ma Driver, 39 input watts V 5K 5000K 10LEDE70 10 Chips, 700 ma Driver, 26 input watts 10LEDE53 10 Chips, 525 ma Driver, 19 input watts 10LEDE35 10 Chips, 350 ma Driver, 14 input watts Distribution Options R2 R3 R5 Type II Type III Type V Paint 1 (blank) GY DDB WH BZ Black (standard) Gray Dark Bronze White Bronze Photocontrol (blank) 3 pin NEMA Photocontrol Receptacle (standard) NR 2 No Photocontrol Receptacle P5 3 5 pin NEMA Photocontrol Receptacle (dimmable driver included) P7 3 7 pin NEMA Photocontrol Receptacle (dimmable driver included) PCLL 4,5 Solid State Long Life Photocontrol PCSS 4,5,6 Not CSA Listed Solid State Long Life Photocontrol ( V) P3 Receptacle Selection Non-ROAM Control Blank Cupola size based on type of control and receptacle P5/P7 Receptacle Selection Non-ROAM Control P5 or P P5/P7 Receptacle Selection ROAM Control RNC is required with: P5 + RCC or P7 + RCC Miscellaneous SS Stainless steel hardware NL NEMA Label XL Not CSA Listed TL Tool-less Entry LDR 7 Ladder Rest SH Shorting Cap SHX 6 Not CSA Listed Shorting Cap HSS House Side Shield CR Enhanced Corrosion Resistant Finish RCC 8 ROAM Dimming Node Cupola Cover Accessories RNC57 3 ROAM Dimming Node Cupola Cover Notes: 1. Other colors available, please contact factory 2. PC and SH not available with NR option 3. Taller cupola cover (RCC) is required when used with ROAM or other similar wireless monitoring control systems 4. Standard failure mode= Fail On 5. Photocontrols supplied with ANSI Standard Turn-On levels 6. XL option is required 7. Ships with unit, field installed 8. Required when using ROAM or other similar wireless monitoring control systems AEL Headquarters, 3825 Columbus Road, Granville, OH Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.
24 O P E R A T I N G C H A R A C T E R I S T I C S DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. TOTAL LUMENS LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 6, , , LEDE10 4K 73 6, , , LEDE10 5K 73 6, , , LEDE70 3K 46 4, , , LEDE70 4K 46 5, , , LEDE70 5K 46 5, , , LEDE10 3K 39 3, , , LEDE10 4K 39 3, , , LEDE10 5K 39 3, , , LEDE70 3K 26 2, , , LEDE70 4K 26 2, , , LEDE70 5K 26 2, , , LEDE53 3K 19 1, , , LEDE53 4K 19 2, , , LEDE53 5K 19 2, , , LEDE35 3K 14 1, , , LEDE35 4K 14 1, , , LEDE35 5K 14 1, , , American Revolution Full Cutoff LED Series 247CL DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. TOTAL LUMENS w/hss (HOUSE SIDE SHIELD) LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 5, , , LEDE10 4K 73 5, , , LEDE10 5K 73 5, , , LEDE70 3K 46 3, , , LEDE70 4K 46 4, , , LEDE70 5K 46 4, , , LEDE10 3K 39 2, , , LEDE10 4K 39 3, , , LEDE10 5K 39 3, , , LEDE70 3K 26 2, , , LEDE70 4K 26 2, , , LEDE70 5K 26 2, , , LEDE53 3K 19 1, , , LEDE53 4K 19 1, , , LEDE53 5K 19 1, , , LEDE35 3K 14 1, , , LEDE35 4K 14 1, , , LEDE35 5K 14 1, , , AEL Headquarters, 3825 Columbus Road, Granville, OH Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.
25
26 -- _
27 2 American Revolution Full Cutoff LED Series 247CL P R O D U C T O V E R V I E W SERIES 247CL Applications: Streetscapes Walkways Pathways Parks Features: Die-cast aluminum housing and hood for long-life performance Die-cast trigger latch (TL) and captive thumb screws option available for easy access to internal components Optical assembly designed for maximum performance, available in Type II, Type III and Type V Hinged hood and captive thumb screws provision afford quick, easy access to electrical and optical area for servicing Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or 3" O.D. Surge protection device (standard) exceeds ANSI C62.41 Category C1 criteria (surge tested at 10kV/5kA) Complies with ANSI: C136.2, C136.10, C CSA listed and suitable for up to 30 C ambient Rated L70, LED life greater than 100,000 hours at 25 C Replaces up to 150W HPS light source incumbant models LED electronic 0V-10V dimmable driver DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. DIMENSIONS 16.8 (427) 3.73 Cupola height P3 without ROAM Shown in line diagram 23.6 (600) Cupola height P5/P7 without ROAM Cupola height P5/P7 with ROAM Effective Projected Area (EPA) The EPA for the American Revolution Series 247CL is 1.0 sq. ft. P5 or P7 option total height is 24.9 (633). Approx. Wt. = 36 lbs. All dimensions are inches (millimeters) unless otherwise noted. Note: Specifications subject to change without notice. American Revolution Full Cutoff Series 247CL LED
28 O R D E R I N G I N F O R M A T I O N American Revolution Full Cutoff LED Series 247CL Example: 247CL 20LEDE70 MVOLT 4K R3 Series Performance Package Voltage Color Temperature (CCT) 247CL American Revolution Full Cutoff LED 20LEDE10 20 Chips, 1050 ma Driver, 73 input watts MVOLT Multi-volt, V 3K 3000K 20LEDE70 20 Chips, 700 ma Driver, 46 input watts V 4K 4000K 10LEDE10 10 Chips, 1050 ma Driver, 39 input watts V 5K 5000K 10LEDE70 10 Chips, 700 ma Driver, 26 input watts 10LEDE53 10 Chips, 525 ma Driver, 19 input watts 10LEDE35 10 Chips, 350 ma Driver, 14 input watts Distribution Options R2 R3 R5 Type II Type III Type V Paint 1 (blank) GY DDB WH BZ Black (standard) Gray Dark Bronze White Bronze Photocontrol (blank) 3 pin NEMA Photocontrol Receptacle (standard) NR 2 No Photocontrol Receptacle P5 3 5 pin NEMA Photocontrol Receptacle (dimmable driver included) P7 3 7 pin NEMA Photocontrol Receptacle (dimmable driver included) PCLL 4,5 Solid State Long Life Photocontrol PCSS 4,5,6 Not CSA Listed Solid State Long Life Photocontrol ( V) P3 Receptacle Selection Non-ROAM Control Blank Cupola size based on type of control and receptacle P5/P7 Receptacle Selection Non-ROAM Control P5 or P P5/P7 Receptacle Selection ROAM Control RNC is required with: P5 + RCC or P7 + RCC Miscellaneous SS Stainless steel hardware NL NEMA Label XL Not CSA Listed TL Tool-less Entry LDR 7 Ladder Rest SH Shorting Cap SHX 6 Not CSA Listed Shorting Cap HSS House Side Shield CR Enhanced Corrosion Resistant Finish RCC 8 ROAM Dimming Node Cupola Cover Accessories RNC57 3 ROAM Dimming Node Cupola Cover Notes: 1. Other colors available, please contact factory 2. PC and SH not available with NR option 3. Taller cupola cover (RCC) is required when used with ROAM or other similar wireless monitoring control systems 4. Standard failure mode= Fail On 5. Photocontrols supplied with ANSI Standard Turn-On levels 6. XL option is required 7. Ships with unit, field installed 8. Required when using ROAM or other similar wireless monitoring control systems AEL Headquarters, 3825 Columbus Road, Granville, OH Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.
29 O P E R A T I N G C H A R A C T E R I S T I C S DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. TOTAL LUMENS LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 6, , , LEDE10 4K 73 6, , , LEDE10 5K 73 6, , , LEDE70 3K 46 4, , , LEDE70 4K 46 5, , , LEDE70 5K 46 5, , , LEDE10 3K 39 3, , , LEDE10 4K 39 3, , , LEDE10 5K 39 3, , , LEDE70 3K 26 2, , , LEDE70 4K 26 2, , , LEDE70 5K 26 2, , , LEDE53 3K 19 1, , , LEDE53 4K 19 2, , , LEDE53 5K 19 2, , , LEDE35 3K 14 1, , , LEDE35 4K 14 1, , , LEDE35 5K 14 1, , , American Revolution Full Cutoff LED Series 247CL DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. TOTAL LUMENS w/hss (HOUSE SIDE SHIELD) LED Quantity, ma, CCT Input Watts R2 LPW R3 LPW R5 LPW 20LEDE10 3K 73 5, , , LEDE10 4K 73 5, , , LEDE10 5K 73 5, , , LEDE70 3K 46 3, , , LEDE70 4K 46 4, , , LEDE70 5K 46 4, , , LEDE10 3K 39 2, , , LEDE10 4K 39 3, , , LEDE10 5K 39 3, , , LEDE70 3K 26 2, , , LEDE70 4K 26 2, , , LEDE70 5K 26 2, , , LEDE53 3K 19 1, , , LEDE53 4K 19 1, , , LEDE53 5K 19 1, , , LEDE35 3K 14 1, , , LEDE35 4K 14 1, , , LEDE35 5K 14 1, , , AEL Headquarters, 3825 Columbus Road, Granville, OH Acuity Brands Lighting, Inc. All Rights Reserved. 07/28/17 Warranty Five-year limited warranty. Complete warranty terms located at: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Please contact your sales representative for the latest product information.
30
31 -- _
32 LIGHT BRACKETS HERITAGE SERIES DECORATIVE POLES A L U M I N U M 2-7/8 O.D. bracket and pole tenons - additional sizes available. SPECIFICATIONS HERITAGE series light brackets are constructed out of seamless aluminum tubing. These products include: factory installed rubber grommets for wireways, press-on end caps and hub/set screw shaft mounting connection for easy orientation adjustment in the field. 2 - TENON 180º VERTICAL MOUNT 3 - TENON 180º VERTICAL MOUNT 18" 18" Model Number: 2VTH180 EPA of Bracket: 1.15 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: " 24" Model Number: 3VTH180 EPA of Bracket: 1.64 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: TENON 120º VERTICAL MOUNT 4 - TENON 90º VERTICAL MOUNT 18" 31-1/4" Model Number: 3VTH120 EPA of Bracket: 1.34 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: " 25-1/2" Model Number: 4VTH90 EPA of Bracket: 1.89 Typical Wt. Load Per Tenon: 50 Lbs. Max. EPA Load Per Tenon: 6.0 Tenon loading has been calculated for weights based on a 100 M.P.H constant wind with a 1.3 gust factor. When loading requirements exceed these limits contact your Valmont representative or Valmont Industries. Variations from sizes listed above are available upon inquiry at the factory. CATALOG LOGIC NUMBER OF ARMS NUMBER OF ARMS TYPE OF ARMS 2 = Double VT= = 3 = Triple Vertical Tenon 4 = Quad TYPE OF SERIES H = Heritage TYPE OF ARMS VT TYPE OF SERIES H ORIENTATION OF ARMS FINISHES ORIENTATION OF ARMS STANDARD FINISHES POLYESTER POWDER 90 = 90 º DBL = Black DMB = Med Bronze DSS = Sandstone 120 = 120 º 180 = 180 º or 180 º DBR = Bright Red DCG = Charcoal Gray DDB = Dark Bronze DNA = Natural Alum DSB = Steel Blue DTG = Dark Green DWH = White OPTIONS OPTIONS Different Size Slipfitters Consult Factory Valmont Industries, Inc. ~ Eaton Avenue ~ Farmington, Minnesota (800) ~ 3-HT-3 SPC /05 - This spec supercedes all previous publications.
33 D-Series LED Bollard Catalog Number Notes Type Hit the Tab key or mouse over the page to see all interactive elements. Introduction Specifications Diameter: 8 Round (20.3 cm) Height: 42 (106.7 cm) Weight (max): 27 lbs (12.25 kg) H The D-Series LED Bollard is a stylish, energysaving, long-life solution designed to perform the way a bollard should with zero uplight. An optical leap forward, this full cut-off luminaire will meet the most stringent of lighting codes. The D-Series LED Bollard s rugged construction, durable finish and long-lasting LEDs will provide years of maintenance-free service. D Ordering Information EXAMPLE: DSXB LED 16C K SYM MVOLT DDBXD DSXB LED Series LEDs Drive current Color temperature Distribution Voltage Control options Other options Finish (required) DSXB LED Asymmetric ma 12C 12 LEDs ma 3, ma Symmetric ma 16C 16 LEDs 2 30K 40K 50K AMBPC AMBLW 3000 K 4000 K 5000 K Amber phosphor converted Amber limited wavelength 3,4 ASY Asymmetric 1 MVOLT 5 SYM Symmetric Shipped installed PE Photoelectric cell, button type DMG 0-10V dimming driver (no controls) ELCW Emergency battery backup 6 Shipped installed SF Single fuse (120, 277, 347V) 4,7 DF Double fuse (208, 240V) 4,7 H24 24 overall height H30 30 overall height H36 36 overall height FG Ground-fault festoon outlet L/AB Without anchor bolts L/AB4 4-bolt retrofit base without anchor bolts 8 DWHXD White DNAXD Natural aluminum DDBXD Dark bronze DBLXD Black DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white Accessories Ordered and shipped separately. MRAB U Anchor bolts for DSXB 8 NOTES 1 Only available in the 12C, ASY version. 2 Only available in the 16C, SYM version. 3 Only available with 450 AMBLW version. 4 Not available with ELCW. 5 MVOLT driver operates on any line voltage from V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options), or photocontrol (PE option). 6 Not available with 347V. Not available with fusing. Not available with 450 AMBLW. 7 Single fuse (SF) requires 120, 277, or 347 voltage option. Double fuse (DF) requires 208 or 240 voltage option. 8 MRAB U not available with L/AB4 option. One Lithonia Way Conyers, Georgia Phone: Acuity Brands Lighting, Inc. All rights reserved.
Lumark PFPRV PREVAIL POLE AND FIXTURE COMBO
DESCRIPTION The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard
More informationLumark PFPRV PREVAIL POLE AND FIXTURE COMBO
DESCRIPTION The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard
More informationTaxonomies, Classifications, and Categories LED FLOODLIGHTS, WALLPACKS, BOLLARDS & LANDSCAPE LIGHTING
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 XT0R5A 50W Led Wallpack Catalog Number Manufacturer Description Weight per unit Product Category Features amperage rating
More informationCatalog # Project. Comments. Prepared by. 11" [279mm] 8-3/4" [222mm] ESCUTCHEON PLATES. 2-5/8" [67mm] 3/4" [19mm] Dia. Hole. 3" [77mm] 1-1/2" [39mm]
DESPTION SPECIFICATION FEATURES at The patented Lumark Crosstour MAXX LED Wall Pack Series of luminaries provides low-profile architectural style with super bright, energy-efficient LEDs. The rugged die-cast
More informationWPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl Catalog Number Manufacturer Description Weight per unit Product
More informationStreetworks CEM/MEM EPIC MEDIUM LED. 1-4 LightBARs
DESCRIPTION The Epic Collection delivers custom luminaire flexibility with high quality, yet availability expectations of standard specification grade product. The Epic Collection can be dressed to suit
More informationGLEON GALLEON LED Light Squares
DESCRIPTION The Galleon LED luminaire delivers exceptional performance in a highly scalable, low-profile design. Patented, high-efficiency AccuLED system provides uniform and energy conscious illumination
More informationLumark NAV NAVION. 1-6 Light Squares
DESCRIPTION The Navion area, site and roadway LED luminaire combines world class optical performance, energy efficiency, and outstanding versatility to meet the requirements of any area, site or roadway
More informationCrosstour LED Wall Mount Luminaire
Crosstour LED Wall Mount Luminaire TM LED WALL PACK Wall or Surface Mount Post or Bollard Mount Pathway or Stairs Inverted Mount 1 Universal Low-Profile Design A New Revolution in Outdoor Lighting Pioneered
More informationVisor Compact Architectural LED Wallpack. Technical Specifications VISOR TM. Visor Configuration Information. Project Catalog Number Type Date
VISOR TM led wallpack Visor compact architectural LED wallpacks replace up to 250W pulse start metal halide wall-mounted fixtures in perimeter, security, and entrance way applications while consuming up
More informationStreetworks NVN NAVION. 1-6 Light Squares
DESCRIPTION The Navion roadway LED luminaire combines world class optical performance, energy efficiency, and outstanding versatility to meet the requirements of any roadway application. Patented AccuLED
More informationVINCI-LED Wall/Area/Flood Lighting
Job Information Type: VINCI-LED Catalog #: Project: Comments: Prepared by: YEAR WARRANTY WARRANTY TEN INCLUDES LABOR ALLOWANCE Vinci Vinci Large 7⅞ ¼ ⅝ 9¾ ½ ⅛ Applications Wall/Surface Post/Bollard Low
More informationInvue MSA MESA LED. 1-6 LightBARs
DESCRIPTION The geometric form of MESA LED luminaire allows it to adapt to either contemporary or traditional architectural settings. Available in single or twin pole mount configurations with optional
More informationInvue ECM/EMM EPIC MEDIUM LED. 1-4 LightBARs
DESCRIPTION The EPIC Collection delivers custom luminaire flexibility with high quality, yet availability expectations of standard specification grade product. The EPIC Collection can be dressed to suit
More informationARIETA 18 Architectural LED Area Luminaire AR18 M2 Series Specification Data Sheet
Project Type Catalog No. Luminaire Data Weight 24 lbs [10.9 kg] EPA 0.55 ft 2 Ordering Information Sample Catalog No. AR18 MV NW 3 DB 700 HSS Product LED Code Voltage Nominal Color Temperature Distribution
More informationARIETA 13 Architectural LED Area Luminaire AR13 M2 Series Specification Data Sheet
Luminaire Data Weight 15.4 lbs [7 kg] EPA 0.47 ft 2 Project Type Catalog No. 8.0 in [203 mm] 8.7 in [220 mm] 8.0 in [203 mm] 8.7 in [220 mm] Ordering Information Sample Catalog No. AR13 MV NW 5 BK 700
More informationCatalog # Project. Comments. Prepared by. 21-3/4" [553mm] "B" TYPE "N" Weight with Arm (lbs.) EPA with Arm 2 (Sq. Ft.) 33 (15.0 kgs.) 0.
DESCRIPTION The Galleon LED luminaire delivers exceptional performance in a highly scalable, low-profile design. Patented, high-efficiency AccuLED system provides uniform and energy conscious illumination
More informationLumark NAV NAVION. 1-6 Light Squares
DESCRIPTION The Navion area, site and roadway LED luminaire combines world class optical performance, energy efficiency, and outstanding versatility to meet the requirements of any area, site or roadway
More informationGreenCobra LED Street Light GCL G-Series Specification Data Sheet
GreenCobra Street Light Project Type Catalog No. Luminaire Data Weight 18 lbs [8.17 kg] EPA 0.8 ft. 2 5.7 in [145 mm] 5 in [127 mm] 5.7 in [145 mm] 15.2 in [386 mm] 15.2 in [386 mm] Ordering Information
More informationCatalog # Project. Comments. Prepared by. 21-3/4" [553mm] "B" Weight with Arm (lbs.) EPA with Arm 2 TYPE "N" (Sq. Ft.) 33 (15.0 kgs.) 0.
DESCRIPTION The Galleon LED luminaire delivers exceptional performance in a highly scalable, low-profile design. Patented, high-efficiency AccuLED system provides uniform and energy conscious illumination
More informationEvolve LED Area Lighting EALS
Evolve LED Area Lighting EALS Product Features The EAL Area Light luminaires are the newest members of the GE Evolve LED Area Light family. They offer a wide range of optical patterns, color temperatures,
More informationE-Cobra LED Street and Area Light EC M2 Series Specification Data Sheet
Project Type Catalog No. Luminaire Data L Weight EPA EC1 16.1 in [409 mm] 10.8 lb [4.9 kg] 0.40 ft 2 EC3 20.8 in [528 mm] 12.7 lb [5.8 kg] 0.45 ft 2 EC4 23.5 in [597 mm] 14.0 lb [6.3kg] 0.48 ft 2 30.6
More informationHAZARDOUS LOCATION CLASSIFIED AREAS LW1 AND LW2 SERIES DOWN OR UP OPTICS
H6..H Project: Fixture Type: Location: Contact/Phone: FINIA LED WALL MOUNTED HAZARDOUS LOCATION CLASSIFIED AREAS LW AND LW SERIES DOWN OR UP OPTICS LED W, W, AND 8W PRODUCT DESCRIPTION The Finia LED LW
More informationDriver Info. Construction Thermal Management: Superior thermal management with die-cast aluminum heatsink. Ambient Temperature:
WP3LED55 Project: Type: Prepared By: Date: 82W, 65W and 55W LED wallpacks. Available with up to 9,000 lumens and 121 LPW. Up to 100,000 hour L70 lifespan. 5-Year Warranty. Color: Bronze Weight: 16.8 lbs
More informationEvolve LED Area Lighting EALP
Evolve LED Area Lighting EALP Product Features The GE Evolve LED Area Light, EALP, is optimized for customers needing an energy saving LED solution while adding flexibility, style and scalability at at
More informationCatalog # Project. Comments. Prepared by
DESCRIPTION The Galleon wall LED luminaire's appearance is complementary with the Galleon area and site luminaire bringing a modern architectural style to lighting applications. Flexible mounting options
More informationGE Evolve LED Post Top Contemporary Twin Support Post Top (EPTC)
GE Evolve LED Post Top Contemporary Twin Support Post Top (EPTC) GE Evolve LED Post Top Lighting Contemporary Twin Support Post Top (EPTC) The GE Evolve LED Contemporary Twin Support Post Top (EPTC) offers
More informationDESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive
More informationMcGraw-Edison GLEON GALLEON LED FLOOD Light Squares
DESCRIPTION The Galleon LED Flood luminaire combines the low-profile design of the Galleon with the mounting angle flexibility of a pole or wallmounted floodlight. With a maximum tilt angle of 60 from
More informationMcGraw-Edison TT TOPTIER LED
DESCRIPTION The TopTier parking garage, canopy and low-bay luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream optical
More informationLEDMPAL15 15 Watt Multi-Purpose LED Area Light
LEDMPAL15 15 Watt Multi-Purpose LED Area Light Project: Type: Catalog #: STANDARD FEATURES WET 1kV Surge Protection Available in 3000k (warm white), 4000K (neutral white) and 5000K (cool white). * Long-life
More informationQty: R4 Type IV Distribution. B4 Two 12V 146 Ah. B5 One 12V 176 Ah. P4 150W Double. 4 XXX 4 hours PM 0 hours AM. 5 XXX 6 hours PM 0 hours AM PM4 45
Date: Customer: Project: Type: Qty: SonneLITER LED Solar Order Code: SDSLS SDSLS Series - - - - - - - - - - SDSLS SonneLITER LED Solar Optics R Type I Distribution R Type II Distribution R Type III Distribution
More informationInvue ECM/EMM EPIC MEDIUM LED. 1-4 LightBARs
DESCRIPTION The EPIC Collection delivers custom luminaire flexibility with high quality, yet availability expectations of standard specification grade product. The EPIC Collection can be dressed to suit
More informationAutobahn Series ATB0 Roadway Lighting
Autobahn Series ATB0 Roadway Lighting PRODUCT OVERVIEW Features: OPTICAL Same Light: Performance is comparable to 70-250W HPS roadway luminaires. White Light: Correlated color temperature - 4000K, 70 CRI
More information80 Watt Multi-Purpose LED Area Light
JGMPAL Watt Multi-Purpose LED Area Light STANDARD Project: Type: Catalog #: WET kv Surge Protection IP65 The JGMPAL series is a group of architectural LED area luminaires designed to illuminate parking
More informationGE Evolve LED Area Lighting Scalable EASC High Lumen
GE Evolve LED Area Lighting Scalable EASC High Lumen Product Features The next evolution of the GE Evolve EASC LED Area Light continues to deliver outstanding features, while adding greater lumen output,
More informationEvolve LED Area Lighting
GE Lighting Evolve LED Area Lighting EALS imagination at work Product Features The GE Evolve LED Area Light, EALS, is optimized for customers requesting an energy saving LED solution while adding greater
More informationQty: L50 50W. B4 Two 12V 146 Ah. B5 One 12V 176 Ah. P4 150W Double. 4 XXX 4 hours PM 0 hours AM. 5 XXX 6 hours PM 0 hours AM PM4 45 PM6 60.
Date: Customer: Project: Type: Qty: Avanza 450 LED Solar Order Code: AV4LS - - - - - - - - - - AV4LS Series AV4LS Avanza 450 LED Solar Optics RW Type III Distribution (Wide) RN Type III Distribution (Narrow)
More informationARIETA 13 Architectural LED Area Luminaire AR13 N-Series Specification Data Sheet
Luminaire Data Weight 15.4 lbs [7 kg] EPA 0.47 ft 2 Project Type Catalog No. 25.6 in [650 mm] 8.0 in [203 mm] 13.5 in [343 mm] 3.78 in [96 mm] Ordering Information Sample Catalog No. AR13 48N MV NW 5 BK
More informationARIETA 13 Architectural LED Area Luminaire AR13 N-Series Specification Data Sheet
Luminaire Data Weight 15.4 lbs [7 kg] EPA 0.47 ft 2 Project Type Catalog No. 25.6 in [650 mm] 8.0 in [203 mm] 13.5 in [343 mm] 3.78 in [96 mm] Ordering Information Sample Catalog No. AR13 48N MV NW 5 BK
More informationMVOLT
High Lumen LED Flood Luminaire Notes Type Hit the Tab key or mouse over the page to see all interactive elements. Introduction Specifications EPA: 5.4 ft 2 (0.50 m 2 ) Depth: 10 (25.4 cm) Width: 25 (62.5
More informationStreetworks GAN GALLEON LED Light Squares
DESCRIPTION The Galleon LED luminaire delivers exceptional performance in a highly scalable, low-profile design. Patented, high-efficiency AccuLED system provides uniform and energy conscious illumination
More informationHeavy industrial LED lighting Champ Pro PFM LED luminaires. Champ PFM. LED floodlights for heavy industrial areas. Authorized Distributor
Heavy industrial LED lighting Champ Pro PFM LED luminaires Champ PFM LED floodlights for heavy industrial areas Authorized Distributor Champ Pro PFM LED floodlights Safe. Reliable. Efficient. Featuring
More informationLUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT
EXPEDITED AVAILABILITY LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT PROJECT NAME: FIXTURE TYPE: FIXTURE HOUSING Heavy cast low copper aluminum assembly (A360 alloy,
More informationBOW SX - LED Luminaire
BOW SX - LED Luminaire The new BOW SX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced
More informationProject: Type: Qty: QH2L. Options QH2L 27 3 /8" 23 3 /16" 3 1 /2" O.D. Pole. Options
Quadro H LED Project: Type: Qty: QHL _ Series Mounting Optics Light Engine CCT Finish Voltage Option _ Pole Series Height Finish Options Series Mounting Optics Light Engine CCT Finish Voltage QHL Quadro
More information304 Series LED Recessed Canopy Luminaires
CAN-304-PS-RS " 6.6" [ 155mm ] [ 169mm ] Notes: 14.0" SQ [ 356mm ] Cut Out Luminaire Clearance Product Family Optic Mounting # of LEDs LED Voltage Color Drive Factory-Installed Options ( x 10 ) Series
More informationV-Bollard Architectural LED Luminaire / Bollard
V-Bollard Architectural LED Luminaire / Bollard The new V-Bollard LED Luminaire from Visionaire combines unique contemporary design with new LED technology and provides optimum lighting and energy savings
More informationThe PREMIER TM. II Series
The PREMIER TM II Series Contemporary architectural design meets the new generation of LED technology in the new Premier II Series by Visionaire Lighting. It is the perfect complement to any university
More informationBDT Product Sales & Support (951) (800)
BDT Product Sales & Support (951)530-3360 (800)325-0380 support@bdtenergygroup.com BDT Product Sales & Support (951)530-3360 BOW LX LED Dimensional Drawings A C B The new BOW LX LED Series continues the
More informationK601D COACH LANTERN - LED PRODUCT SPECIFICATIONS
The K601D is a cost effective coach lantern with a historical appearance that offers high performance Advanced LED Technology with our signature P4 optical system. It has excellent spacing and low glare
More informationLEDMPALPRO LED Area Luminaire
CATALOG NUMBER: NOTES: FIXTURE TYPE: PROJECT: FEATURES DIMENSIONS 2 ¾ 12 ⅝ 1 ⅝ Weight: 8.2 lbs. (8W), 1.8 lbs. (1W) & 11 lbs. (14W) PRODUCT DESCRIPTION The LEDMPALPRO series is a group of premium architectural
More informationPG Series. Our PG Series has now been expanded to complete your entire site needs. With added housing shapes of round and square we offer
PG Series At Visionaire Lighting we are always looking to advance and engineer the latest in LED technology and lighting. In our efforts of advancement, we have taken our highly rated PGA LED Luminaire
More informationV-Bollard Architectural LED Luminaire / Bollard
V-Bollard Architectural LED Luminaire / Bollard The new V-Bollard LED Luminaire from Visionaire combines unique contemporary design with new LED technology and provides optimum lighting and energy savings
More informationOSQ Series OSQ LED Area/Flood Luminaire Large
OSQ Series OSQ LED Area/Flood Luminaire Large Product Description DA Mount The OSQ Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to
More informationMetalux SS LED. Type. Project. Date. Comments. Prepared by
Metalux DESCRIPTION Catalog # Type The Steeler LED is designed for a wide variety of applications and mounting heights. Precision designed optics, multiple distributions, lumen outputs and color temperatures
More informationLumark NAV NAVION. 1-6 Light Squares
DESCRIPTION The Navion area, site and roadway LED luminaire combines world class optical performance, energy efficiency, and outstanding versatility to meet the requirements of any area, site or roadway
More informationAutobahn Series ATBO Roadway Lighting
Autobahn Series ATBO Roadway Lighting P R O D U C T O V E R V I E W Applications: Roadways Off ramps Residential streets Parking lots DIMENSIONS Effective Projected Area (EPA): The EPA for the ATB0 is
More informationLED Parking Garage. Optional motion sensor
LED Parking Garage The Element II LED luminaire is the ideal choice for efficient, worry-free parking garage lighting applications. The features and benefits of the Element II solve the lighting challenges
More informationEvolve LED Wall Pack. N Series (EWNB)
Evolve LED Wall Pack N Series (EWNB) Product Features The next generation of the GE Evolve LED Wall Pack is designed to efficiently illuminate walkways, area, and general lighting applications. The EWNB
More informationRSW Series RSW LED Street Luminaire Small
RSW Series RSW LED Street Luminaire Small Product Description The Cree RSW Series, utilizing WaveMax Technology, will transform the way utilities and municipalities light their residential streets. With
More informationMA20/MA21 SERIES MAYA - LED Post Top
TYPE: QUANTITY: PROJECT: / SERIES Post Top CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION 7 1 2 3 4 1- Cast aluminum LED heat sink. 2- Optical system assembly. 3- Set of two
More informationK199 CALIFORNIA - LED ACORN PRODUCT SPECIFICATIONS 39 1/8"
The K99 California luminaire was one of the original acorn styles that graced the streets of North American towns and cities, particularly in Southern California. Teamed with King Luminaire s high performance
More informationBetaLED Recessed Canopy Luminaires
CAN-227-5M-RM "A" 8.8in [225mm] Driver Housing 350 ma HL option, 525mA, 700mA DIM A 12.8" [325mm] 23.8" [605mm] Fixture DIM B DIM C 90 LED 21.6" [549mm] 20.6" [523mm] 120 LED 26.2" [665mm] 25.125" [638mm]
More informationLevanto DETAILS. IP67 EPA: 0.96 FT 2 Weight: 35 lbs - 16 kg
Levanto CLE17T4A Levanto DETAILS LEVANTO s sleek arms and slim heat sink highlights its contemporary style. The Utility Fitter and superior thermal management achieves remarkable efficacy. Its refined
More informationALG LED Area Light K lm 21000lm 33000lm 100W 150W 300W. Type III Type V
ALG LED Area Light Description Innovative universal mounting Slim design DLC Premium Type III and V standard 10KV surge protection standard Intended Applications Parking lots, walkways, auto dealerships,
More informationRitorno Square Asymmetrical LED
Date: Customer: Project: Type: Qty: Ritorno Square Asymmetrical LED Order Code: RSAL RSAL Series - - - - - - - Pole Order Code: - - - Series Height Finish Options RSAL Ritorno Square Asymmetrical LED Mounting
More information19.0" (482mm) Performance Summary 3.1" (79mm) NanoOptic Precision Delivery Grid optic Receptacle location (ordered as an option)
(69mm) 19.0" (48mm) OSQ Series 3" (79mm) OSQ LED Area/Flood Luminaire Medium Product Description NEMA Photocell Receptacle location (ordered as an option) DA Mount The OSQ Area/Flood luminaire blends extreme
More informationXSP High Output Series XSP2 High Output LED Street/Area Luminaire Double Module
XSP High Output Series XSP High Output LED Street/Area Luminaire Double Module Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP High Output
More informationAPPENDIX B: LISTS OF APPROVED MATERIALS
APPENDIX B: LISTS OF APPROVED MATERIALS APPENDIX B: LISTS OF APPROVED MATERIALS B1 Street Lighting MAY 2016 APPENDIX B1 STREETLIGHTING MATERIAL LIST 1.0 LIGHTING 1.1 Electrical Handholes CSA Precast concrete
More informationPaseo. Luminaire CE21T4UF Pole PA40 base cover BD11
Paseo Luminaire CE21T4UF Pole PA40 base cover BD11 CE21T4B Paseo DETAILS With a flat lens design, the PASEO is ideal for modern design applications with light control in mind. The optional Utility Fitter
More informationAerolumeTM. Collection. Area Luminaires 3 Fixture Sizes W HID 64/80/120
Aerolume Collection Area Luminaires Fixture Sizes 70-00W HID 64/80/ Overview Mini-Aerolume Aerolume Aerolume-G 1." (4.9mm) 18" (47.mm) " (84.mm) 6." (16.1mm) 19" (48.6mm) 4" (1.4mm) 8" (0.mm) " (84.mm)
More informationAutobahn Series ATB2 Roadway Lighting
P R O D U C T O V E R V I E W Applications: Roadways Off ramps Residential streets Parking lots 355.6 mm (14 ) DIMENSIONS 101.6 mm (4 ) 787.4 mm (31 ) Effective Projected Area (EPA) The EPA for the ATB2
More informationScottsdale Vertex - SCV Petroleum Canopy LED Luminaire
Catalog # : Project : Prepared By : Date : Scottsdale Vertex - SCV The Scottsdale Vertex is the most feature-rich canopy fixture in the marketplace. Innovations such as combined optical distributions,
More informationMeridian DETAILS CA10T4A CA10T4D CA13T4A. IP66 EPA: 2.2 FT 2 Weight: 27 lbs - 12 kg
Meridian Meridian DETAILS The elegant modular design of the MERIDIAN series allows adaptability to all surroundings and perfect integration with many different environments. Composed of cast and extruded
More informationProject: Type: Qty: SA1L. Optics Mounting Light Engine CCT Finish Voltage Options. Series SA1L-XX-1-NH SA1L-XX /2" O.D.
Saturn LED Project: Type: Qty: SAL Series Optics Mounting Light Engine CCT Finish Voltage Pole Series Height Finish Pole Options Option Series SAL Saturn LED Optics Mounting Light Engine CCT Finish Voltage
More informationPGA Parking Garage Luminaire
PGA Parking Garage Luminaire The new PGA LED Luminaire from Visionaire combines unique contemporary design with new LED technology and provides optimum lighting and energy savings over traditional lighting
More informationEXPEDITED AVAILABILITY
EXPEDITED AVAILABILITY Q S R - P L E D PROJET NAME: PROJET TYPE: OPTIAL HOUSING Heavy cast low copper aluminum (A356 alloy;
More informationSaturn Cutoff. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: SAC Saturn Cutoff SAC
Date: Customer: Project: Type: Qty: Saturn Cutoff Order Code: SAC - - - - - - - - SAC Series SAC Saturn Cutoff Pole Order Code: - - - Series Height Finish Options Optics R Type II Distribution R Type V
More informationLED CONVERSION KITS. Optical Systems KCK118 WASHINGTON LIGHTING THE WAY
CONVERSION KITS KCK118 WASHINGTON The King Luminaire KCK118 Washington Conversion Kit offers a simple way to convert to high efficiency. With tested optical control and dynamic thermal management, King
More informationLED lighting system. We Brighten Your Brands.
LED lighting system We Brighten Your Brands. Brilliance by design. PDL3 MODUS is a universal 1 for 1 upgrade of existing 400 W HID downlights, featuring application-based high (200 W), medium (150 W),
More informationSuper-high output LED high bay. Affordable replacement for up to 400W HID. RAIL RCLIGHTING.CA
Super-high output LED high bay. Affordable replacement for up to 4W HID. RAIL RCLIGHTING.CA 888 7- High Bay RAIL Affordable LED replacement with up to 4W HID equivalency Ideal for large spaces at mounting
More informationBDT Product Sales & Support (951) (800)
Roadway : The Evolution Of Design And Efficiency The evolution of LED roadway lighting really brings our Roadway lighting products into the 21st Century with an exciting array of options for cities and
More informationXSP Series XSP2 LED Street/Area Luminaire Double Module Version C
XSP Series XSP LED Street/Area Luminaire Double Module Version C Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible
More informationwww.greenelectricalsupply.com Page 1 of 4 The HLR SERIES hazardous location family of fixtures is suitable for use in a wide range of indoor and outdoor Class I Division 2 applications. Available in eight
More informationPLED LED CONVERSION KITS
The King Luminaire LED Conversion Kits offer a simple way to convert to high efficiency LED. With tested optical control and dynamic thermal management, King Luminaire s P4 Flat Array LED Conversion kit
More informationXSP Series XSPR LED Street/Area Luminaire Version A
XSP Series Product Description In addition to a low initial cost, the XSPR LED Street luminaire maintains the familiar look of the traditional cobrahead design and delivers substantial energy savings while
More informationFVT / LED Vapor Tight
The LED vapor tight fixtures are a preferred upgrade to replacing HID fixtures and existing vapor tight fixtures in varying climate conditions. This weatherproof fixture is suitable for use in parking
More informationLytePro. A Family of Architectural LED Luminaires. Solid State, Solid Solutions. Stonco is a Philips company
LytePro A Family of Architectural LED Luminaires Solid State, Solid Solutions. Stonco is a Philips company Complements the simplest to the most complex of architectural landscapes LED area and site lighting
More informationOP2 CosmoPolis Series
Catalog Number: Approvals: - - - - - Series/Source-Wattage Optics E ballast Voltage Mounting Options Finish (Factory Installed) Accessories (Field Installed) Date: Page of 6 Overall Dimensions OP2 arm
More informationLSA TM series. BBE LED Roadway, Area & Parking Lighting Luminaire V9: LSA-04/06/16. Performance Data:
V9: LSA-04/06/16 BBE LED Roadway, Area & Parking Lighting Luminaire LSA TM series Performance Data: Input Voltage: 120-277Vac / 347-480Vac 50/60Hz Power: 30-250W Luminous flux: 3400-25500lm Up to 118LPW@700mA
More informationCatalog Number. Notes
Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The is constructed to withstand moisture, dust, and chemical contact. Common applications for include demanding environments such as manufacturing,
More informationCapella 3. Project Name. Construction. Optical System. Product Applications
Product # Type Date Project Name Project Location Capella 3 Construction Housing and lens frame are constructed from heavy-duty low copper die-cast aluminum. Material is structurally rigid and uniformly
More informationCONVECT RADIATE CONDUCT
The King Luminaire KCK445R Sol-Lux LED Conversion Kit offers a simple way to convert to high efficiency LED. Through Tri-Thermal Management, the KCK445R Sol-Lux reduces heat via convection, radiation and
More informationGE Lighting. Heavy Industrial High Bay & Low Bay Lighting. (ABR1 - Series) imagination at work
GE Lighting Albeo LED Luminaire Heavy Industrial High Bay & Low Bay Lighting (ABR1 - Series) imagination at work Product Features The Albeo ABR1-Series is an IP66 rated fixture for demanding industrial
More informationGE Evolve LED Roadway Lighting ERL1-ERLH-ERL2
The Evolve LED Roadway Luminaire is optimized for customers requiring a LED solution for local, collector and major roadways. GE s unique reflective optics are designed to optimize application efficiency
More informationLED CONVERSION KITS. Optical Systems KCK124 PARAGON LIGHTING THE WAY
CONVERSION KITS KCK124 PARAGON The King Luminaire KCK124 Paragon Conversion Kit offers a simple way to convert to high efficiency. With tested optical control and dynamic thermal management, King Luminaire
More informationLevanto. details CLE17T4A
Augusta Levanto Levanto details 2 LEVANTO s sleek arm design and slim heat sink highlights its contemporary style. The Utility Fitter and superior thermal management achieves remarkable efficacy. Its refined
More informationLED Vapor Tight For Tough Environments
VAPOR TIGHT DURABLE LED Vapor Tight For Tough Environments Universal s EVERLINE Vapor Tight is ideal for unforgiving lighting environments. These durable LED fixtures have a fiber-glass reinforced housing
More informationOSQ High Output LED Area/Flood Luminaire featuring Cree TrueWhite Technology. Product Specifications. Electrical Data*
OSQ Series Product Description DA Mount The OSQ High Output Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to last, the housing is
More information