EXPEDITED AVAILABILITY

Size: px

Start display at page:

Download "EXPEDITED AVAILABILITY"

Shavonne Parks
5 years ago
Views:

EXPEDITED AVAILABILITY Q S R - P L E D PROJET NAME: PROJET TYPE: OPTIAL HOUSING Heavy cast low copper aluminum (A356 alloy; <0.2% copper) assembly with integral cooling fins.

Solid barrier wall separates optical and electrical compartments. The optical and electrical compartments are integrated to create one assembly. Minimum wall thickness is.188".

1 EXPEDITED AVAILABILITY Q S R - P L E D PROJET NAME: PROJET TYPE: OPTIAL HOUSING Heavy cast low copper aluminum (A356 alloy; <0.2% copper) assembly with integral cooling fins. The Optical Panel mounting surface is milled flat (surface variance <±.003") to facilitate thermal transfer of heat to housing and cooling fins. Solid barrier wall separates optical and electrical compartments. The optical and electrical compartments are integrated to create one assembly. Minimum wall thickness is.188". ELETRIAL HOUSING w/ INTEGRATED ARM Heavy cast low copper aluminum (A356 alloy; <0.2% copper) assembly with integral cooling ribs surrounding the electrical compartment and a flat surface on the top of the arm to accommodate a photocell receptacle. Solid barrier wall separates optical and electrical compartments. The optical compartment and electrical compartment with the integrated support arm combine to create one assembly. Minimum wall thickness is.188". ast and hinged driver assembly cover is integrated with wiring compartment cover. * *UNIVERSAL MOUNTING BRAKET INLUDED PATENT PENDING OPTIS Emitters (LED s) are arrayed on a metal core PB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. A micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce Type III and Type IV site/area distributions. Panels are field replaceable and field rotatable in 90 increments. LED's are 4000K T. 15" (381mm) 11.5" 292mm TOP VIEW 22" 559mm LED DRIVER(S) onstant current electronic with a power factor of >.90 and a minimum operating temperature of -40 F. Driver(s) is/are UL and cul recognized and mounted directly against the Electrical Housing to facilitate thermal transfer, held down by universal clamps to facilitate easy removal. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of V, 50/60Hz or 347V-0V, 50,60Hz. (0-10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. FRONT VIEW 5.25" 133mm SIDE VIEW FINISH Electrostatically applied TGI Polyester Powder oat on substrate prepared with 20 PSI power wash at 140 F. Four step media blast and iron phosphate pretreatment for protection and paint adhesion. 400 F bake for maximum hardness and durability. LISTED US

2 QSR - PLED DRILLING TEMPLATE MODULES PROMOTION.L. 2" (51mm) 1.25" (32mm) WIREWAY.563 DIA. (14mm) 4" (102mm) LED Array.406 DIA. (10mm) (3) HOLES E.P.A.= 0.45 Available in: & LED Module UNIVERSAL MOUNTING BRAKET (INLUDED) LED Array 3.625" 92mm 2.5" 64mm 7.5" 191mm FITS ROUND OR SQUARE S. S P E / O R D E R I N G I N F O R M A T I O N ATALOG # LED OUNT VOLTAGE WATTS LUMENS REPLAES HID OPTIONS QSR/20/PLED-III/*/RAL-8019/DBZ QSR/20/PLED-IV/*/RAL-8019/DBZ QSR/50/PLED-III/*/RAL-8019/DBZ QSR/50/PLED-IV/*/RAL-8019/DBZ SURGE PROTETOR.... SP HOUSE SIDE SHIELD....HS-PLED QSR/10/PLED-III/*/RAL-8019/DBZ QSR/10/PLED-IV/*/RAL-8019/DBZ 180 QSR/20/PLED-III/*/RAL-8019/DBZ QSR/20/PLED-IV/*/RAL-8019/DBZ QSR/50/PLED-III/*/RAL-8019/DBZ QSR/50/PLED-IV/*/RAL-8019/DBZ QSR/10/PLED-III/*/RAL-8019/DBZ QSR/10/PLED-IV/*/RAL-8019/DBZ 180

EXPEDITED AVAILABILITY Q S R - P L E D w/ RATED* FOR 140MPH (*AASHTO 2000) FIXTURE HOUSING assembly with integral cooling fins. The Optical Panel mounting surface is milled flat (surface variance <±.

The optical and electrical compartments are integrated to create one assembly. Minimum wall thickness is.188".

3 EXPEDITED AVAILABILITY Q S R - P L E D w/ RATED* FOR 140MPH (*AASHTO 2000) FIXTURE HOUSING assembly with integral cooling fins. The Optical Panel mounting surface is milled flat (surface variance <±.003") to facilitate thermal transfer of heat to housing and cooling fins. Solid barrier wall separates optical and electrical compartments. The optical and electrical compartments are integrated to create one assembly. Minimum wall thickness is.188". PROJET NAME: FIXTURE TYPE: ARM MOUNTING assembly with integral cooling ribs surrounding the electrical compartment and a flat surface on the top of the arm to accommodate a photocell receptacle. Solid barrier wall separates optical and electrical compartments. The optical compartment and electrical compartment with the integrated support arm combine to create one assembly. Minimum wall thickness is.188". ast and hinged driver assembly cover is integrated with wiring compartment cover. OPTIS Emitters (LED s) are arrayed on a metal core PB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. A micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce Type III and Type IV site/area distributions. Panels are field replaceable and field rotatable in 90 increments. LED's are 4000K T. PATENT PENDING LED DRIVERS onstant current electronic with a power factor of >.90 and a minimum operating temperature of -40 F. Driver(s) is/are UL and cul recognized and mounted directly against the Electrical Housing to facilitate thermal transfer, held down by universal clamps to facilitate easy removal. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of V, 50/60Hz or 347V-0V, 50,60Hz. SHAFT 4" square, fabricated from high grade structural steel tube. Shaft conforms to AS-A specifications. Meets or exceeds minimum yield strength of 46,000 p.s.i. Wall thickness for 15'0" is 11Ga. (.120"). Wall thickness for 20'0" and 25'0" is 7Ga. (.180"). Reinforced hand hole is furnished with cover, shaft is furnished with ground lug located inside pole on wall opposite hand hole. BASE PLATE Fabricated from structural quality hot rolled steel. Meets or exceeds minimum yield strength of 36,000 p.s.i. base telescopes and is circumferentially welded to pole shaft. Slotted bolt holes provide 1 " flexibility on either side of bolt circle centerline. 15" (381mm) FRONT VIEW 11.5" 292mm 5.25" 133mm TOP VIEW 22" 559mm SIDE VIEW ANHORAGE (4) anchor bolts fabricated from hot rolled steel bar, minimum yield strength of 50,000 p.s.i. bolts have "L" bend on one end and are threaded on the other end. Bolts are fully galvanized and are furnished with two nuts and two washers. BASE OVER Fabricated from heavy gauge quality carbon steel. Two piece cover conceals base. FINISH (Applies to Luminaire and Pole) Electrostatically applied TGI Polyester Powder oat on substrate prepared with 20 PSI power wash at 140 F. Four step sand blast and iron phosphate pretreatment for protection and paint adhesion. 400 F bake for maximum hardness and durability. Smooth finish is standard. LISTED US

4 QSR - PLED 140 MPH PROMOTION MODULES 4" Hand Hole 18" LED Array Bolt ircle E.P.A.= 0.45 Available in: & LED Module Height 8" - 11" Dia. LED Array Bolt Projection Two Piece Base over Assembly Bolt Projection Above Grade: Minimum 3¼" Maximum 3¾" S P E / O R D E R I N G I N F O R M A T I O N ATALOG # VOLTAGE WATTS LUMENS REPLAES HID LED OUNT OPTIONS SNTS /QSR/20/PLED-III/*/RAL-8019/DBZ SNTS /QSR/20/PLED-IV/*/RAL-8019/DBZ SNTS-204-7/QSR/50/PLED-III/*/RAL-8019/DBZ SNTS-204-7/QSR/50/PLED-IV/*/RAL-8019/DBZ SURGE PROTETOR SP HOUSE SIDE SHIELD HS-PLED SNTS-254-7/QSR/10/PLED-III/*/RAL-8019/DBZ SNTS-254-7/QSR/10/PLED-IV/*/RAL-8019/DBZ 180 SNTS /QSR/20/PLED-III/*/RAL-8019/DBZ SNTS /QSR/20/PLED-IV/*/RAL-8019/DBZ SNTS-204-7/QSR/50/PLED-III/*/RAL-8019/DBZ SNTS-204-7/QSR/50/PLED-IV/*/RAL-8019/DBZ SNTS-254-7/QSR/10/PLED-III/*/RAL-8019/DBZ SNTS-254-7/QSR/10/PLED-IV/*/RAL-8019/DBZ 180

EXPEDITED AVAILABILITY PROJET NAME: QSR-PLED TWIN ASSEMBLY FIXTURE TYPE: w/ RATED* FOR 140MPH S P E I F I A T (*AASHTO 2000) I O N S FIXTURE HOUSING assembly with integral cooling fins.

5 EXPEDITED AVAILABILITY PROJET NAME: QSR-PLED TWIN ASSEMBLY FIXTURE TYPE: w/ RATED* FOR 140MPH S P E I F I A T (*AASHTO 2000) I O N S FIXTURE HOUSING assembly with integral cooling fins. The Optical Panel mounting surface is milled flat (surface variance <±.003") to facilitate thermal transfer of heat to housing and cooling fins. Solid barrier wall separates optical and electrical compartments. The optical and electrical compartments are integrated to create one assembly. Minimum wall thickness is.188". ARM MOUNTING assembly with integral cooling ribs surrounding the electrical compar tment and a flat surface on the top of the arm to accommodate a photocell receptacle. Solid barrier wall separates optical and electrical compartments. The optical compartment and electrical compartment with the integrated support arm combine to create one assembly. Minimum wall thickness is.188". ast and hinged driver assembly cover is integrated with wiring compartment cover. OPTIS Emitters (LED s) are arrayed on a metal core PB panel with each emitter located on a copper thermal transfer pad and enclosed by an LED refractor. A micro-reflector inside the refractor re-directs the house side emitter output towards the street side and functions as a house side shielding element. Refractors are injection molded H12 acrylic. Each LED refractor is sealed to the PB over an emitter and all refractors are retained by an aluminum frame. Any one Panel, or group of Panels in a luminaire, have the same optical pattern. LED refractors produce Type III and Type IV site/area distributions. Panels are field replaceable and field rotatable in 90 increments. LED's are 4000K T. PATENT PENDING TOP VIEW 11.5" LED DRIVERS onstant current electronic with a power factor of >.90 and a minimum operating temperature of -40 F. Driver(s) is/are UL and cul recognized and mounted directly against the Electrical Housing to facilitate thermal transfer, held down by universal clamps to facilitate easy removal. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of V, 50/60Hz or 347V-0V, 50,60Hz. 292mm 22" 15" 559mm (381mm) 5.25" 133mm SHAFT 4" square, fabricated from high grade structural steel tube. Shaft conforms to AS-A specifications. Meets or exceeds minimum yield strength of 46,000 p.s.i. Wall thickness for 15'0" is 11Ga. (.120"). Wall thickness for 20'0" and 25'0" is 7Ga. (.180"). Reinforced hand hole is furnished with cover, shaft is furnished with ground lug located inside pole on wall opposite hand hole. FRONT VIEW SIDE VIEW BASE PLATE Fabricated from structural quality hot rolled steel. Meets or exceeds minimum yield strength of 36,000 p.s.i. base telescopes and is circumferentially welded to pole shaft. Slotted bolt holes provide 1 " flexibility on either side of bolt circle centerline. ANHORAGE (4) anchor bolts fabricated from hot rolled steel bar, minimum yield strength of 50,000 p.s.i. bolts have "L" bend on one end and are threaded on the other end. Bolts are fully galvanized and are furnished with two nuts and two washers. BASE OVER Fabricated from heavy gauge quality carbon steel. Two piece cover conceals base. FINISH (Applies to Luminaire and Pole) Electrostatically applied TGI Polyester Powder oat on substrate prepared with 20 PSI power wash at 140 F. Four step sand blast and iron phosphate pretreatment for protection and paint adhesion. 400 F bake for maximum hardness and durability. Smooth finish is standard. U.S. Architectural L i ght i ng US LISTED

LUMENS REPLAES HID LED OUNT OPTIONS Lumens Per Fixture SNTS-154-11-2180/QSR/20/PLED-III/*/RAL-8019/DBZ SNTS-154-11-2180/QSR/20/PLED-IV/*/RAL-8019/DBZ SNTS-204-7-2180/QSR/50/PLED-III/*/RAL-8019/DBZ

6 QSR - PLED TWIN ASSEMBLY 140 MPH PROMOTION MODULES 4" Hand Hole 18" Bolt ircle E.P.A.= 0.45 Available in: & LED Module 8" - 11" Dia. Height Bolt Projection LED Array LED Array Two Piece Base over Assembly Bolt Projection Above Grade: Minimum 3¼" Maximum 3¾" S P E / O R D E R I N G I N F O R M A T I O N ATALOG # VOLTAGE WATTS LUMENS REPLAES HID LED OUNT OPTIONS Lumens Per Fixture SNTS /QSR/20/PLED-III/*/RAL-8019/DBZ SNTS /QSR/20/PLED-IV/*/RAL-8019/DBZ SNTS /QSR/50/PLED-III/*/RAL-8019/DBZ SNTS /QSR/50/PLED-IV/*/RAL-8019/DBZ SURGE PROTETOR SP HOUSE SIDE SHIELD HS-PLED SNTS /QSR/10/PLED-III/*/RAL-8019/DBZ SNTS /QSR/10/PLED-IV/*/RAL-8019/DBZ 180 SNTS /QSR/20/PLED-III/*/RAL-8019/DBZ SNTS /QSR/20/PLED-IV/*/RAL-8019/DBZ SNTS /QSR/50/PLED-III/*/RAL-8019/DBZ SNTS /QSR/50/PLED-IV/*/RAL-8019/DBZ SNTS /QSR/10/PLED-III/*/RAL-8019/DBZ SNTS /QSR/10/PLED-IV/*/RAL-8019/DBZ 180

LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT

EXPEDITED AVAILABILITY LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT PROJECT NAME: FIXTURE TYPE: FIXTURE HOUSING Heavy cast low copper aluminum assembly (A360 alloy,