Vol. 2 HY-PRO SHRINK
|
|
- Nathaniel Greene
- 6 years ago
- Views:
Transcription
1 Vol. 2 HY-PRO SHRINK
2 Face-Mill Cutter for Small Machines Tool Insertion Heating: Heat the holder with hot air for about 3 minutes. Attachment: Insert tool into the hole, which has been expanded by the heat. Fixing: The holder fixes the tool in place by cooling and clamping tightly. Tool Removal Detachment: The clamped tool can be removed by re-heating. Features Less Run Out Holding Ability Under 5µm The HY-PRO shrink reduces run out and provides consistent precision. The holder, which is light weight and has good balance, is also suitable for high-speed operations. Compared to other tool holders such as the collet type, this holder has stronger holding ability, and can successfully hold tools during high load operations. 2
3 Face-Mill Cutter for Small Machines Holders Basic Nozzle BT30 BT40 BT50 CT-40 CT-50 HSK-A63 HSK-A100 HSK-F63M BT40 BT50 CT-40 CT-50 HSK-A63 HSK-A100 Shrink Extensions Slim } Regular Flush Ø 3-12 Ø 1/4-1/2 in. Cutting Tools Carbide End Mills Carbide Drills Other Carbide Tools Standard End Mill Chuck Straight Collet Regular Type Shrink Fit Holder Drawing Thread Regular Slim or Flush Collet Shrink Fit Holders Type Specification BT, CT Shanks HSK Shanks Basic Holders Holder for Shrink Extension (without nozzle) BT-30, -40, -50 CT-40, -50 A63, A100 F63M Nozzel Holders Holder for Shrink Extention (Coolant Supply Nozzle is Optional) BT-40, -50 CT-40, -50 A63, A100 Extensions Type Application Dimension/Size Regular Type For General Operations inch/metric Slim Type Use this type when a slim holder is needed to avoid interference between the tool and the work piece inch/metric Flush Type Use this type when coolant is supplied from end face of the extension inch/metric 3
4 HY-PRO Induction Heating, Cooling, Cleaning and Drying in Seconds! Features Capable of shrinking both carbide & high-speed steel cutting tools in seconds. Danger of burns via hot shrink holders is eliminated because the cooling cycle is fully automated and access to the heated holder is not possible. Corrosion protection due to use of cooling emulsion. Machine Specifications Processor controlled 8kW frequency generator Carbide shrinking range from ø3mm~ø20mm HSS shrinking range from ø6mm~ø20mm Maximum shrinking length is inches Maximum cooling length is 9.40 inches For optimal protection between coil and tool shank, 3 quick-change discs are provided Maximum tool change time within 30 seconds Cooling time can be set between 1 and 99 seconds 8 gallon internal cooling tank Power supply with 3 x 400V/16A Compressed air connection 90 psi Working height of 3.41 ft Weight 220 lbs The automated water-cooling method drastically reduces cooling times, especially when compared to conventional methods. A pneumatically actuated cylinder moves the holders in and out of position, allowing for hands-free cooling in record time. Item Name Induction Unit Extension Adapter Base Holder Adapter EDP # Size Specification HY-PRO Shrink Induction Unit & HY-PRO Multistep Transformer All Shrink Extensions HY-PRO Induction adapter & setting pod for 2-pc shrink extensions All Shrink Extensions HY-PRO Induction adapter & adjustable setting pod for 2-pc shrink extensions SK30 Adapter Pod HY-PRO Induction adapter for BT/CT30 base holders SK40 Adapter Pod HY-PRO Induction adapter for BT/CT40 base holders SK50 Adapter Pod HY-PRO Induction adapter for BT/CT50 base holders HSK50 Adapter Pod HY-PRO Induction adapter for HSK50 base holders HSK63 Adapter Pod HY-PRO Induction adapter for HSK63 base holders HSK100 Adapter Pod HY-PRO Induction adapter for HSK100 base holders HSK25E Adapter Pod HY-PRO Induction adapter & adjustable setting pod for HSK-25E holders HSK32E Adapter Pod HY-PRO Induction adapter & adjustable setting pod for HSK-32E holders HSK40E Adapter Pod HY-PRO Induction adapter & adjustable setting pod for HSK-40E holders 4
5 HR-B Handy Unit HY-PRO SHRINK Features Small Foot Print Light Weight 120 V AC Current Easy-adjust slide Benefit Fit on a table top Portable Works with any standard wall outlet Fast and simple height adjustments Machine Specifications EDP Number Name Voltage required Power rating Dimensions Shrink fit capabilities Heating cycle time Included Accessories Weight 68802B HRB-02S-120NA SHRINK UNIT 120V 1200W 362mm x 105mm x 570mm All OSG HY-PRO Shrink holders 120 seconds Heat resistant gloves, timer, tool tweezer 7.5Kg (16.5 Lbs) Safe Use of Shrink Devices 11. DO NOT allow contact between hot air from the system and the body as there is a possibility of burns. 22. DO NOT use this system near flammable gases and substances. 33. DO NOT apply water to the system. 4 Recommended cool-down time is five minutes. 5
6 HR-B Handy Unit Accessories Item Name EDP No. Size Specification Base BAA-01 To hold the appropriate adapter for positioning a shrink fit holder or extension during assembly and disassembly. Adjustable base adapter BAS-02 To position 10-40mm straight type shrink extensions during assembly and disassembly. Can be used in conjunction with the BAA-01 base ADH-HSK25 Used with HSK25 series tool holders. It fits into the top of the BAA-01 Base, and accepts the tool holder. Adapter ADH-HSK32 ADH-HSK40 Used with HSK32 series tool holders. It fits into the top of the BAA-01 Base, and accepts the tool holder. Used with HSK40 series tool holders. It fits into the top of the BAA-01 Base, and accepts the tool holder ADH-HSK50 Used with HSK50 series tool holders. It fits into the top of the BAA-01 Base, and accepts the tool holder. Adapter ADH-BT30 Used with BT30 series tool holders. It fits into the top of the BAA-01 Base, and accepts the tool holder. Adapter ADH-40 ADH-50 Used with BT40 and CT40 series tool holders. It fits into the top of the BA-01 Base, and accepts the tool holder. Used with BT50 and CT50 series tool holders. It fits into the top of the BA-01 Base, and accepts the tool holder. Base Adapter ADH-SLK Used with regular, flush and slim type shrink extensions. It fits into the top of the BAA-01 Base. F Type Nozzle NOZ-M4-12 Optional nozzles for BT and HSK Flush Type Holders 6
7 HR-B Handy Unit Accessories Item Name EDP No. Size Specification HSA-3 3mm shanks, 10 pcs HSA-4 4mm shanks, 10 pcs HSA-5 5mm shanks, 10 pcs HSA-6 6mm shanks, 10 pcs HSA-7 7mm shanks, 10 pcs HSA-8 8mm shanks, 10 pcs HSA-9 9mm shanks, 10 pcs. Coil spring type depth stops HSA-10 HSA-11 10mm shanks, 10 pcs. 11mm shanks, 10 pcs HSA-12 12mm shanks, 10 pcs HSA-1/8 1/8 shanks, 10 pcs HSA-3/16 3/16 shanks, 10 pcs HSA-1/4 1/4 shanks, 10 pcs HSA-5/16 5/16 shanks, 10 pcs HSA-3/8 3/8 shanks, 10 pcs HSA-1/2 1/2 shanks, 10 pcs. Tool Tray SDH-01 Cooling tray for tools removed from heat shrink holders. Shrink Extension Stand SDK-01 Vertical stand holds up to 25 extensions. Wrench W-135 Used for the assembly and disassembly of the HY-PRO Shrink two piece tooling system extensions and base holders. 7
8 Do-It-Yourself Extensions Notes If necessary, the shape of the shrink extension can be easily modified. This design provides the best holder shape for operations that have major interference with work materials. 1. The shape of the flush collet cannot be adjusted. 2. Other adjustments should be based on the ranges described below. (wall thickness should be at least 1.5mm) 3. DO NOT change the overall length. 4. For details, please refer to the instruction manual attached to the product package. Recommended Cutting Conditions for Extension Modification Notes 1. The cutting depth should be kept small. 2. Use water soluble coolant. 3. Use positive-rake inserts for Stainless Steel. Cutting Speed (m/min) Roughing Cutting Speed (m/min) Feed (mm/rev) 0.1 Cutting Depth (min) 0.2 Finishing
9 HSK-E25 Mono Series For General Purpose & Coolant Thru the Tool Operations Metric Sizes Type EDP No. Description D L C D1 L1 L2 C1 C2 H H1 Regular Slim E25-SLRA E25-SLRA E25-SLRA E25-SLSA E25-SLSA E25-SLSA E25-SLSA E25-SLSA E25-SLSA E25-SLSA E25-SLSA E25-SLSA HSK-E32 Mono Series For General Purpose & Coolant Thru the Tool Operations Metric Sizes Type EDP No. Description D L C D1 L1 L2 C1 C2 H H1 Regular Slim E32-SLRA E32-SLRA E32-SLRA E32-SLRA E32-SLRA E32-SLRA E32-SLRA E32-SLRA E32-SLRA E32-SLSA E32-SLSA E32-SLSA E32-SLSA E32-SLSA E32-SLSA E32-SLSA E32-SLSA E32-SLSA mm shank requires H6 tolerance. 6-12mm shank requires H7 torelance. 9
10 HSK-E40 Mono Series For General Purpose & Coolant Thru the Tool Operations Metric Sizes Type EDP No. Description D L C D1 L1 L2 C1 C2 H H1 Regular Slim E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLRA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA E40-SLSA Applicable Machine Tools: HSK-E25 HSK-E32 HSK-E40 SODICK HIGHTECH MC430L ROKU-ROKU MEGA III/NANO-21 MITSUBISHI µ Machining V1 KERN HSPC2525 MAKINO V22/V33 SODICK HIGHTECH MC430L/ MC650L/ HS150L MORI SEIKI NVD1500DCG MITSUI SEIKI VL30 OKK VD300 ROEDERS GMBH RHP600 ROKU-ROKU Cega-542 MIKRON HSM400/ UCP600 HERMLE C Series DIGMA HSC800/5 3-5mm shank requires H6 tolerance. 6-12mm shank requires H7 torelance. 10
11 For General Purpose & Coolant Thru the Tool Operations HY-PRO SHRINK Base Holders: BT, CT and HSK 2PC Series Coolant Tube CAT Holders EDP No. Description L L1 C C CT40-SLK CT50-SLK BT Holders EDP No. Description L L1 L2 C C BT30-SLK Deg BT30-SLK Deg BT40-SLK BT40-SLK BT50-SLK HSK Holders EDP No. Description L L1 L2 C C HSK-E50-SLK HSK-A63-SLK HSK-A63-SLK HSK-F63M-SLK HSK-A100-SLK Note: For extended gage lengths, please contact OSG s technical department for application advice. 3-5mm shank requires H6 tolerance. 6-12mm shank requires H7 torelance. 11
12 Nozzle Type Holders: BT, CT and HSK 2PC Series For Coolant Thru the Holder Operations Coolant Tube CAT Holders EDP No. Description L L1 C C CT40-SLK12-45F CT50-SLK12-75F BT Holders EDP No. Description L L1 L2 C C BT40-SLK12-45F BT40-SLK12-75F BT40-SLK12-135F BT50-SLK12-75F BT50-SLK12-105F BT50-SLK12-135F HSK Holders EDP No. Description L L1 L2 C C HSK-A63-SLK12-75F HSK-A63-SLK12-135F HSK-A100-SLK12-105F HSK-A100-SLK12-135F The nozzles are optional. For lubricating through the oil holes of tools, replace the nozzle with a coolant stop screw. The pressure limit of the coolant stop screw is 3 MPa mm shank requires H6 tolerance. 6-12mm shank requires H7 torelance. 12
13 Regular Type Shrink Extensions For General Purpose & Coolant Thru the Tool Operations Inch Sizes EDP No. Description D D1 D2 D3 L L1 L2 H H1 H2 C C1 θ Insertion Limit CR12-1/8-55 1/ CR12-3/ / CR12-1/4-55 1/ CR12-5/ / CR12-3/8-55 3/ CR12-7/ / CR12-1/2-55 1/ The tool should be inserted deeper than the safety mark. Do not exceed the insertion limit Metric Sizes EDP No. Description D D1 D2 D3 L L1 L2 H H1 H2 C C1 θ Insertion Limit CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR The tool should be inserted deeper than the safety mark. Do not exceed the insertion limit
14 Flush Type Shrink Extensions For Coolant Thru the Collet Operations Inch Sizes EDP No. Description D D1 D2 D3 L L1 L2 H H1 H2 C C1 θ Insertion Limit CF12-1/8-55 1/ CF12-3/ / CF12-1/4-55 1/ CF12-5/ / CF12-3/8-55 3/ CF12-7/ / CF12-1/2-55 1/ The tool should be inserted deeper than the safety mark. The collet cannot be customized. Do not exceed the insertion limit Metric Sizes EDP No. Description D D1 D2 D3 L L1 L2 H H1 H2 C C1 θ Insertion Limit CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF The tool should be inserted deeper than the safety mark. The collet cannot be customized. Do not exceed the insertion limit
15 For Long Reach & Coolant Thru the Tool Operations HY-PRO SHRINK Slim Type Shrink Extensions Inch Sizes EDP No. Description D D1 D2 D3 L L1 L2 H H1 H2 C C1 θ Insertion Limit CS12-1/8-80 1/ CS12-1/ / CS12-3/ / CS12-3/ / CS12-1/4-80 1/ CS12-1/ / CS12-5/ / CS12-5/ / CS12-3/8-80 3/ CS12-3/ / CS12-7/ / CS12-7/ / CS12-1/2-80 1/ CS12-1/ / This slim collet successfully avoids interference with the work material
16 Slim Type Shrink Extensions For Long Reach & Coolant Thru the Tool Operations Metric Sizes EDP No. Description D D1 D2 D3 L L1 L2 H H1 H2 C C1 θ Insertion Limit CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS This slim collet successfully avoids interference with the work material. The tool should be inserted deeper than the safety mark. Do not exceed the insertion limit
17 For Standard Milling/End Mill Chucks HY-PRO SHRINK Straight Regular Type Shrink Extensions Inch Sizes EDP No. Description L L1 L2 L3 L4 D C C1 C2 H Insertion Limit ST19.05-SLR1/ ST19.05-SLR5/ ST19.05-SLR3/ ST25.4-SLR 1/ ST25.4-SLR 5/ ST25.4-SLR 3/ ST25.4-SLR 3/ ST25.4-SLR 1/ ST25.4-SLR 1/ Shrink holder with straight shank for ordinary milling chucks. Provides high performance of shrink fit without holder The tool should be inserted deeper than the safety mark. Do not exceed the insertion limit. Metric Sizes EDP No. Description D D1 D2 L L1 L2 L3 H H1 H2 C C1 C2 Insertion Limit ST16-SLRA M ST16-SLRA M ST20-SLRB M ST20-SLRB M ST25-SLRA M ST25-SLRA M ST25-SLRB M ST25-SLRB M ST25-SLRB M ST25-SLRB M ST25-SLSB M ST25-SLSB M
18 Straight Slim Type Shrink Extensions For Standard Milling/End Mill Chucks Inch Sizes EDP No. Description L L1 L2 L3 L4 D C C1 C2 H Insertion Limit ST9.525-SLS1/ ST9.525-SLS3/ ST12.7-SLS1/ ST SLS1/ ST SLS3/ ST19.05-SLS1/ ST19.05-SLS3/ ST19.05-SLS1/ ST19.05-SLS5/ ST19.05-SLS3/ ST25.4-SLS 1/ ST25.4-SLS 5/ ST25.4-SLS3/ ST25.4-SLS 3/ ST25.4-SLS1/ ST25.4-SLS 1/ This slim collet successfully avoids interference with the work material. The tool should be inserted deeper than the safety mark. Do not exceed the insertion limit. Metric Sizes EDP No. Description D D1 D2 L L1 L2 L3 H H1 H2 C C1 C2 Insertion Limit ST10-SLS ST10-SLS ST10-SLS ST10-SLS ST12-SLS ST16-SLS ST16-SLS ST16-SLS ST20-SLS ST20-SLS ST20-SLS ST20-SLSB M ST25-SLS ST25-SLS ST25-SLSA M ST25-SLS ST25-SLS ST25-SLS ST25-SLSA M ST25-SLS ST25-SLS ST20-SLSA M ST25-SLSA M ST32-SLSA M ST25-SLS ST25-SLS ST20-SLSA M ST25-SLS ST32-SLSA M Shrink holder with straight shank for ordinary milling and end mill chucks. Provides high performance of shrink fit without holder
19 CARBIDE SHRINK EXTENSIONS Straight Type Shrink Extensions For Increased Rigidity and Reach Metric Sizes EDP No. Description L d3 d2 d L1 L ST CS ST CS ST CS ST CS Packed: 1 pc Taper Type Shrink Extensions For Increased Rigidity and Reach Metric Sizes EDP No. Description L d3 d2 d L1 L2 ß L PC CS PC CS PC CS PC CS Packed: 1 pc ,
20 OSG TAP & DIE, INC. 676 E. Fullerton Avenue Glendale Heights IL FAX: Copyright 2008 OSG Tap & Die, Inc. All rights reserved. Printed in USA. EDP# CA/ g-k
Shrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More information12 type ltra-small all lightweight Small lightweight Standard
Freely combine Master Holders and ollets Modular system NEW Easy torage ightweight Affordable 40 000 min-1 40 000 min-1 30 000 min-1 3μ (. 00012 ") mini 6 6type 3μ (. 00012 ") mini 8 8type (. 00020 ")
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationHIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationCOMPANY INTRODUCTION
COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationVARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY.
PM4200 MILLING MACHINE VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY. Quality Machine Design with Power-Packed Performance Precision machined dovetail ways and adjustable gibs
More informationACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationDETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!!
HSK-T ing Systems or Turning Mill M/ ETa-1 OET HOER AGE HEA General Purpose ETa-1 ollet Holder Pull collet type OET HOER 2mm collapsibility with just one collet!! Just 6 collets is all it takes to chuck
More informationpowrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationWINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
More informationHY-PRO AERO-F Inch & Metric Plug (4P-5P)
HY-PRO AERO-F Inch & Metric Vol 7 List 11015 d k Lc Ln L lk 4-40 UNC 4-48 UNF 6-32 UNC 6-40 UNF 8-32 UNC 8-36 UNF 10-24 UNC H4 1101505605 H5 1101500205 H6 1101500305 H7 1101505705 H8 1101515505 1101515605
More informationPOWER CLAMP SHRINK FIT TECHNOLOGY.
POWER CLAMP SHRINK FIT TECHNOLOGY www.haimer-usa.com CONTENTS Power Clamp Page Power Clamp Advantages 3 Coil Technology 4 Contact Cooling 5 Power Clamp System: Basic Line/Profi Line/Premium Line 6 Amortization
More informationANGLE JET (Angle Head Holder)
ANGE JET (Angle Head Holder) BT -AGCT-RSC - D HSA -AGCT-RSC - D With the new mechanism "the coolant unit ", the thru-the-coolant from the spindle can be supplied directly to the cutting edge. FEATURES
More informationCOLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet
OET HOER M/ TOO OET HOER Ultra precision taper collet chuck The best-suited base holder applicable to all the kinds of machining This holder meets all the requirements for high-speed cutting; Accuracy,
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationHPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
More informationBORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
More informationStandard Programme Clamping Technology. The tool specialists for the trade.
Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationMPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationHeimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More informationCenters. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine
BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining
More informationMACHINE TYPE: MATSUURA MC-760V-DC (TWIN-SPINDLE)
MACHINE TYPE: MATSUURA MC-760V-DC (TWIN-SPINDLE) SERIAL #: 84043814 YEAR: 1984 ATC: (2X) 25 TOOLS X-AXIS (LEFT TO RIGHT): 29.92 Y-AXIS (IN & OUT): 16.0 Z-AXIS (UP & DOWN): 19.0 SPINDLE SPEEDS: 25-4000
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationEnergy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
More informationWe do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
More informationPerformance LargeSeries
Performance LargeSeries Vertical Machining Centers jyoti.co.in Performance Large Series Vertical Machining Center OVERVIEW VMC Large Series have versatility and capacity to carryout maximum range of jobs,
More informationDRIVEN TOOLS ASK ABOUT OUR PRICE MATCH GUARANTEE WE INVITE INQUIRIES FOR OKUMA, NAKAMURA, MIYANO, BIGLIA
2018 Winter/Spring Flyer Pricing valid from February 1 to May 31, 2018 PRECISION MILLING MACHINE VISES Vises are Matched An integral key and large fasteners reduce deflection by 50% 4 jaw plate positions
More informationDV Shank Tools DV40...F2 F37 DV50...F38 F71
DV Shank Tools DV40..................................................................................F2 F37 DV50.................................................................................F38 F71
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationCoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant
Cororill elta-c Solid carbide drills BIntroduction Solid carbide drills for small part machining designed for precision holes, IT8-10. Made with a tough fine-grained substrate with a wear resistant PV
More informationCTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet
SK-T ing Systems for Turning Mill M/ OET OER ANGE EA OET OER Taper collet chuck The optimum holder choices for a variety of applications TA General Purpose coolant-through oolant- Through utter SUKIMA
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationWe do Specials! mimatic Special Solutions» Cutting Tools»» Live Tools
» Cutting Tools»» Live Tools We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools»» Live Tools Table of Contents Cutting Tools
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationYear of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number X mm / Y mm / Z mm C - +/- 220 / B - +/- 110
EiMa GAMMA T LINEAR 5 axes portal machining center In excellent conditions Manufacturer Model EiMa GAMMA T LINEAR Year of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number 11615 Travels X 3.700
More informationWe set the standard for the highest precision and most advanced technology in the machine tool accessory market
ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100
More informationHitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.2 Indexable illing Too S The new S/HU ini has 2 kinds of insert shapes and applications: JDT type insert for 90 cutting JDT Schneidplatte für 90 earbeitungen
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More informationVFX for High Efficiency Milling of Titanium Alloys
TOOL NEW 2017.5 Update B182A For Milling VFX eries Insert Expansion VFX for High Efficiency Milling of s Outstanding metal removal rates up to 24 inch 3 /min (with ø2.5" cutter) Unparalleled Chip Ejection
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationBARON-MAX VL Range Vertical Machining Centers
BARON-MAX VL Range Vertical Machining Centers Linear Guide ways VL Range Higher Efficiency, Rigid Structure, Excellent and Stable Accuracy At a Very Affordable Pricing Cost Effective, High Performance
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationLM5200 milling machine
LM5200 milling machine 2013 10 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
More informationCopyright EXTRON All rights reserved E-M-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationBT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.
BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationMSeries. High Rigidity Vertical Machining Centers
MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationLeading the Way... In CNC Tooling Technology in the 21 st Century
Leading the Way... In CNC Tooling Technology in the 21 st Century Leading the Way... In CNC Tooling Technology in the 21 st Century We specialize in CNC tooling and workholding devices for horizontal and
More informationSuper Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationPRODUCT CATALOGUE 2015
PRODUCT CATALOGUE 2015 INTRODUCTION Terms and conditions WE HAVE THE KNOWLEDGE, THE EXPERIENCE AND THE SOLUTIONS! SPV Spintec aims to be your complete supplier and partner when it comes to processing in
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationTIM HIGH FREQUENCY SPINDLES
TIM HIGH FREQUENCY SPINDLES High-frequency spindle has a motor which is designed fit for high spindle speed. Because high-speed machining can be performed in a more stable manner, high-frequency spindle
More informationpowrgrip System The ambitious toolholding system Product catalog
powrgrip System The ambitious toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Product offering 04 Discover powrgrip 06 Automatic clamping unit PGU 07
More informationgrindsmart 529xw english
grindsmart 529xw english smart grinding unlimited grinding solutions The GrindSmart 529XW is a 5-axis precision tool grinder for the manufacturing of standard and high performance cutting tools from Ø
More informationCCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12
AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3
More informationCNC Ultra High Precision. UHP-Turn 450. High precision spindle precision of = <0.8 µm
CNC Ultra High Precision UHP-Turn 45 High precision spindle precision of =
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationCnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationBARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
More informationIrontite Products Inc. Irontite by Kwik-Way & Irontite by Kwik-Way of Canada, Ltd. (319) FAX (319)
Parts & Instruction Manual Irontite Products Inc. Irontite by Kwik-Way & Irontite by Kwik-Way of Canada, Ltd. 1-800-423-3384 PO BOX 9877, (Main) Cedar Rapids, 1-800-821-7520 Iowa 52409 (EST) USA (319)
More information