LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw

Transcription

1 4176 en / a Permanent Magnet Solutions LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw Selection guide

2 A modular offer LS SOFT Software + cables RS485 or USB/RS22 Afficheur LCD Multilingual console Operator interfaces Extension and integrated functions SM Application SMART CARD Save and copies all the parameters SM I/O Plus Speed position feedback SM Resolver Communication SM Universal encoder SM-DeviceNet SM-CAN Open SM-Profibus SM-Ethernet SM-Interbus UT 02 15V 1 Single Ended Extension function Choke EMC filter dv / dt filter Braking resistance Speed sensor return connecting cables s LSRPM Speed position feedback Fixation Hall effect sensor, absolute and incremental encoders, resolvers IM IM IM 9101 Mechanical extension Protections Thermal protections Drip cover Insulated bearings Axial forced - ventilation 2nd shaft end The option characteristics are described in the technical documents for the relevant products. 1 : UT02 required to manage the Hall effect sensor.

3 LSRPM: PERMANENT MAGNET ROTOR TECHNOLOGY IN A MECHANICALLY PROVEN IP55 INDUCTION MOTOR At the peak of efficiency Weight kg Compactness Power - Weight ratio A.C. induction motor η % LSRPM Energy savings Efficiency Power kw LSRPM EFF1 A.C. induction motor Speed min -1 Characteristics: IP55, IK08, acc. to IEC Power rating 0.75 to 400 kw Torque 1 to 1400 Nm - Speed 1 to 5500 min-1 - Frame size 90 to 15 mm Gain in compactness up to frame sizes - Reduction in the weight and dimensions of the motor - Simplification through removal of transmission devices: pulleys, belts, gearboxes Exceptional gains in efficiency over the entire speed LSRPM Synchronous permanent magnet motors Aluminium alloy frame - 0,75 to 400 kw Technical catalogue - Reduction in energy bills - Increase in service life and simplification of maintenance Variable speed operation - Constant torque over the entire speed - Optimized with centrifugal torque applications LSRPM 225 SR2 : 4500 min -1 / 170 kw / 1 A LSRPM 0 LU2 : 4500 min -1 / 150 kw / 288 A LSRPM 0 L1 : 4500 min -1 / 1 kw / A LSRPM 0 L1 : 4500 min -1 / kw / 186 A LSRPM 0 L : 4500 min -1 / 80 kw / 157 A LSRPM 0 L : 4500 min -1 / 65 kw / 128 A

4 UNIDRIVE SP: A NEW-GENERATION DRIVE WHICH MEETS ALL USER EXPECTATIONS Unlimited options! Performance - Manipulate, position, synchronize, cut, print rapidly, with repeat accuracy, in complete safety Simplicity - Install and start using your system quickly and easily without any special training Flexibility - Adapt your system to the various production constraints in a responsive yet inexpensive way Reduced costs - Integrate the control system functions relating to the application - Réduire le nombre de composants et le câblage associé

5 Introduction DYNEO offers innovative, high-performance solutions consisting of synchronous motors with permanent magnets in the rotor circuit and LEROY-SOMER variable speed drives. Combined with the UNIDRIVE SP drive, the innovative LSRPM permanent magnet synchronous motor technology is revolutionizing the electric motor by offering solutions adapted to the industrial environment and by providing optimal electrical mechanical thermal performance: Extended speed High torque over the entire operating speed Very high efficiency Compact design The LSRPM - UNIDRIVE SP combinations described in this manual are suitable for most applications: ventilation, pumping, compression, materials handling, conveying, centrifuging, extrusion, etc. Appropriate add-ons or options for drives and motors can be included to satisfy the demands of the various processes. For further information about the products described in this manual, please consult the corresponding technical documentation. NB: LEROY-SOMER reserves the right to modify the design, technical specifications and dimensions of the products and solutions shown in this document. The descriptions cannot in any way be considered contractual.

6 Contents PAGE Selection method... 1 Selection charts to 5500 min to 4500 min to 600 min to 000 min to 2400 min to 1800 min to 1500 min to 900 min to 750 min to 75 min General drive characteristics... 2 Weights & dimensions Adapting the drive and motor when installing Designation... 28

7 Selection method Example A machine requires torque of 0 N.m over a speed from 800 to 40 min -1 in continuous duty. The maximum torque is 240 N.m. Step 1: Choice of a) Select the according to the speed Selection charts to 5500 min to 4500 min to 600 min Example: Selection of the 4500 for operation from 800 to 40 min -1 b) Select the torque c) Select the motor: choose the curve with a torque rating immediately above that required by the application (pages 2 to ) Torque from 0 to 60 N.m 2 LSRPM 225 SR1 : 4500 min -1 / 170 kw / 1 A LSRPM 0 LU1 : 4500 min -1 / 150 kw / 288 A LSRPM 0 L1 : 4500 min -1 / 1 kw / A 5 LSRPM 0 L : 4500 min -1 / kw / 186 A 6 LSRPM 0 L : 4500 min -1 / 80 kw / 157 A LSRPM 0 L1 : 4500 min -1 / 1 kw / A 5 LSRPM 0 L : 4500 min -1 / kw / 186 A 6 LSRPM 0 L : 4500 min -1 / 80 kw / 157 A Example: Selection of curve 5 for an application requirement of 0 N.m. 5 LSRPM 0 L : 4500 min -1 / kw / 186 A Example: Selection of the torque 0 to 60 N.m for a torque requirement of 0 N.m Rated Rated output Rated type speed current Step 2: Choice of drive (pages to 21) Designation 4500 Rated LSRPM90SL 6,8 LSRPM90L 8,5 LSRPML 10,2 LSRPML 12 Drive designation Available To rque Current 1 Minimum To tal switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D η T J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 5,5T SP ,9 1,1 14, ,10 SP 8T SP , ,5 12,6 18,90 SP 8T SP , 17,5 19, 15, 16,8 SP 11T SP , ,0 15,7 2,55 SP 11T SP , ,0 18,8 2,10 SP 16T SP ,2 22,0 18,8 28, SP 11T SP , ,4 21 2,10 SP 16T SP ,5 22,00 To rque curve no. 4 91,6 0, ,1 0, ,1 0, ,6 0, LSRPML 1,7 SP 16T SP 240 1,7 29 1, 25 1, ,6 0, LSRPM12M 18,6 SP 16T SP ,5 0,5 5,8 27,2 1,90 SP 22T SP ,6 9 42,9 5 8, ,6 0, LSRPM12M 2 SP 27T SP ,9 4 47,0 4 92,6 0, LSRPM12M 27 SP T SP , ,60 4 9,1 0, LSRPM160MP 5 LSRPM160MP 44 LSRPM160LR 52 LSRPM0L 65 LSRPM0L 80 SP T SP 40 27, ,2 5,4 61,60 SP 40T SP , ,80 SP 50T SP , ,50 SP 50T SP , ,0 SP 60T SP , ,50 SP 50T SP , ,5 8 91,0 SP 60T SP , ,40 SP 75T SP , ,50 SP 75T SP ,80 SP T SP ,00 SP 75T SP , ,80 SP T SP ,80 SP 1T SP ,1 0, ,6 0, ,6 0, ,1 0, ,8 0, LSRPM0L SP 1T SP , 0, LSRPM0L1 1 SP 1T SP SP 150T SP SPMA S ,5 0, LSRPM0LU1 150 SPMA S ,1 0, LSRPM0LU1 170 LSRPM250SE SPMA S SPMA S SPMA S SPMA 1401-S ,2 0, ,4 0, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. η T = efficiency X drive efficiency. a) Select the curve no. in the table b) Select the drive rating according to the rated and maximum torque required by the application Example: Selection of drive for an application requiring rated torque of 0 N.m and maximum torque of 240 N.m. Choice of drive: where Mn = 212 N.m and Mmax = 247 N.m SP 1T Drive type Drive rating 1

8 Torque-speed characteristics 5500 Torque from 0 to 24 N.m Torque from 24 to 90 N.m 90 5 LSRPM 160 LR : 5500 min -1 / 52 kw / 97 A LSRPM L : 5500 min -1 / 1,8 kw / 25 A 80 6 LSRPM 160 MP : 5500 min -1 / 44 kw / 82 A 12 LSRPM L : 5500 min -1 / 12,1 kw / 22 A 1 LSRPM L : 5500 min -1 / 10,4 kw / 19 A LSRPM 160 MP : 5500 min -1 / 5 kw / 67 A LSRPM 90 L : 5500 min -1 / 8,6 kw / 15,8 A LSRPM 90 SL : 5500 min -1 / 6,9 kw / 12,7 A Torque from 90 to 240 N.m LSRPM 0 L1 : 5500 min -1 / 140 kw / 267 A LSRPM 0 L : 5500 min -1 / kw / 195 A LSRPM 0 L : 5500 min -1 / 85 kw / 169 A 4 LSRPM 0 L : 5500 min -1 / 70 kw / 18 A For operation at very low speeds, refer to the technical motor catalogue reference

9 Selection charts 5500 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL 6,9 LSRPM90L 8,6 LSRPML 10,4 LSRPML 12,1 LSRPML 1,8 Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 5,5T SP ,0 10,4 11, ,1 SP 8T SP , ,0 12,7 19,1 SP 8T SP , 14,5 16,0 15, 16,8 SP 11T SP , ,9 15,8 2,1 SP 11T SP , ,9 19 2,1 SP 16T SP , , ,5 SP 11T SP ,7 18,5 21,9 19,5 2,1 SP 16T SP ,1 21 0,5 22 1,9 SP 16T SP ,8 22 0, 2,2 1,9 SP 22T SP 401 1,8 24 6,0 25 7,5 Torque curve no. 6 91,6 0, ,1 0, ,1 0, ,6 0, ,6 0, LSRPM12M 18,6 SP 22T SP ,6 2 5,2 5 8,5 6 92,1 0, LSRPM12M 2 SP 27T SP ,0 4 47, 6 92,1 0, LSRPM12M 27 SP 40T SP , ,0 6 92,6 0, LSRPM160MP 5 LSRPM160MP 44 LSRPM160LR 52 LSRPM0L 70 SP 40T SP , ,8 SP 50T SP , , SP 60T SP ,0 67,5 SP 50T SP , , , SP 60T SP , ,4 SP 75T SP , ,0 SP 60T SP , ,9 95,1 114,4 SP 75T SP , ,5 SP 75T SP , ,8 SP T SP ,8 SP 1T SP ,0 6 92,6 0, ,1 0, ,1 0, , 0, LSRPM0L 85 SP 1T SP ,1 246,0 6 9,7 0, LSRPM0L SPMA S ,0 0, LSRPM0L1 140 SPMA S ,7 0, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency.

10 Torque-speed characteristics 4500 Torque from 0 to 29 N.m Torque from 29 to 110 N.m 8 LSRPM 160 LR : 4500 min -1 / 52 kw / 97 A 0 14 LSRPM L : 4500 min -1 / 1,7 kw / 25 A 9 LSRPM 160 MP : 4500 min -1 / 44 kw / 81 A LSRPM L : 4500 min -1 / 12 kw / 22 A 16 LSRPM L : 4500 min -1 / 10,2 kw / 18,8 A LSRPM 160 MP : 4500 min-1 / 5 kw / 67 A 17 LSRPM 90 L : 4500 min -1 / 8,5 kw / 15,7 A LSRPM 12 M : 4500 min-1 / 27 kw / 51 A 12 LSRPM 12 M : 4500 min -1 / 2 kw / 45 A LSRPM 90 SL : 4500 min -1 / 6,8 kw / 12,6 A 40 1 LSRPM 12 M : 4500 min -1 / 18,6 kw / 5 A Torque from 110 to 60 N.m Torque from 60 to 490 N.m 50 2 LSRPM 225 SR1 : 4500 min -1 / 170 kw / 1 A LSRPM 0 LU1 : 4500 min -1 / 150 kw / 288 A LSRPM 0 L1 : 4500 min -1 / 1 kw / A 5 LSRPM 0 L : 4500 min -1 / kw / 186 A 6 LSRPM 0 L : 4500 min -1 / 80 kw / 157 A LSRPM 250 SE : 4500 min -1 / kw / 415 A LSRPM 0 L : 4500 min -1 / 65 kw / 128 A For operation at very low speeds, refer to the technical motor catalogue reference

11 Selection charts 4500 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL 6,8 LSRPM90L 8,5 LSRPML 10,2 LSRPML 12 Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 5,5T SP ,9 1,1 14, ,10 SP 8T SP , ,5 12,6 18,90 SP 8T SP , 17,5 19, 15, 16,8 SP 11T SP , ,0 15,7 2,55 SP 11T SP , ,0 18,8 2,10 SP 16T SP ,2 22,0 18,8 28, SP 11T SP , ,4 21 2,10 SP 16T SP ,5 22,00 Torque curve no. 4 91,6 0, ,1 0, ,1 0, ,6 0, LSRPML 1,7 SP 16T SP 240 1,7 29 1, 25 1, ,6 0, LSRPM12M 18,6 SP 16T SP ,5 0,5 5,8 27,2 1,90 SP 22T SP ,6 9 42,9 5 8, ,6 0, LSRPM12M 2 SP 27T SP ,9 4 47,0 4 92,6 0, LSRPM12M 27 SP T SP , ,60 4 9,1 0, LSRPM160MP 5 LSRPM160MP 44 LSRPM160LR 52 LSRPM0L 65 LSRPM0L 80 SP T SP 40 27, ,2 5,4 61,60 SP 40T SP , ,80 SP 50T SP , ,50 SP 50T SP , ,0 SP 60T SP , ,50 SP 50T SP , ,5 8 91,0 SP 60T SP , ,40 SP 75T SP , ,50 SP 75T SP ,80 SP T SP ,00 SP 75T SP , ,80 SP T SP ,80 SP 1T SP ,1 0, ,6 0, ,6 0, ,1 0, ,8 0, LSRPM0L SP 1T SP , 0, LSRPM0L1 1 SP 1T SP SP 150T SP SPMA S ,5 0, LSRPM0LU1 150 SPMA S ,1 0, LSRPM225SR1 170 LSRPM250SE SPMA S SPMA S SPMA S SPMA 1401-S ,2 0, ,4 0, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 5

12 Torque-speed characteristics 600 Torque from 0 to 4 N.m Torque from 4 to 10 N.m 12 LSRPM 160 LR : 600 min -1 / 49 kw / 91 A LSRPM L : 600 min -1 / 12,8 kw / 2 A 19 LSRPM L : 600 min -1 / 11,2 kw / 21 A LSRPM L : 600 min -1 / 9,6 kw / 17,6 A 21 LSRPM 90 L : 600 min -1 / 8 kw / 14,8 A 22 LSRPM 90 SL : 600 min -1 / 6,4 kw / 11,9 A LSRPM 160 MP : 600 min -1 / 41 kw / 77 A 14 LSRPM 160 MP : 600 min-1 / 4 kw / 6 A 15 LSRPM 12 M : 600 min-1 / 26 kw / 48 A 16 LSRPM 12 M : 600 min -1 / 22 kw / 41 A 17 LSRPM 12 M : 600 min -1 / 17,6 kw / A Torque from 10 to 0 N.m Torque from 0 to 770 N.m 7 LSRPM 0 LU1 : 600 min -1 / 125 kw / 241 A 750 LSRPM 280 SD : 600 min -1 / 290 kw / 540 A LSRPM 0 L1 : 600 min -1 / 105 kw / 1 A LSRPM 280 SC : 600 min -1 / 240 kw / 450 A 0 9 LSRPM 0 L : 600 min -1 / 85 kw / 16 A 10 LSRPM 0 L : 600 min -1 / 70 kw / 140 A LSRPM 250 SE : 600 min -1 / 190 kw / 6 A LSRPM 0 L : 600 min -1 / 50 kw / 105 A LSRPM 250 SE : 600 min -1 / 165 kw / 11 A Torque from 770 to 105 N.m LSRPM 15 SP : 600 min -1 / 90 kw / 765 A LSRPM 280 MK : 600 min -1 / 25 kw / 65 A For operation at very low speeds, refer to the technical motor catalogue reference

13 Selection charts 600 Power supply upstream from the 400 V drive Designation Rated Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg LSRPM90SL 6,4 SP 5,5T SP ,9 15,7 17, 11 12,1 SP 8T SP , ,5 11,9 17,9 4 91,1 0, LSRPM90L 8 SP 8T SP ,9 14,8 16,8 SP 11T SP ,5 14,8 22,2 4 91,6 0, SP 8T SP , 22,6 24,9 15, 16,8 LSRPML 9,6 SP 11T SP ,6 26 6,6 17,6 24,8 4 92,1 0, SP 16T SP 240 9,6 26 9,0 17,6 26,4 LSRPML 11,2 SP 11T SP ,2 0,0 21 2,1 SP 16T SP ,2 0 45,0 21 1,5 4 92,1 0, LSRPML 12,8 SP 16T SP ,8 4 51,0 2 4,5 4 92,6 0, SP 16T SP ,5 41, 48,4 27,2 1,9 LSRPM12M 17,6 SP 22T SP , ,4 48,0 4 92,6 0, SP 27T SP , ,5 49,5 LSRPM12M 22 SP 22T SP ,8 49,5 54,5 5 8,5 SP 27T SP , ,0 4 92,6 0, SP 27T SP 402 2, 61,8 68,0 4 47, LSRPM12M 26 SP T SP , ,6 4 9,1 0, SP 40T SP , ,0 SP T SP 40 28,8 79,1 91,2 5,4 61,6 LSRPM160MP 4 SP 40T SP ,7 6 74,8 4 9,1 0, SP 50T SP ,5 6 94,5 SP 40T SP ,2 97,1 106, ,8 LSRPM160MP 41 SP 50T SP , , 4 9,6 0, SP 60T SP , ,5 LSRPM160LR 49 SP 50T SP ,7 118,6 10,5 8 91, SP 60T SP , ,4 4 9,6 0, LSRPM0L 50 SP 60T SP ,4 SP 75T SP , 4 9,1 0, LSRPM0L 70 SP 75T SP ,8 SP T SP ,0 4 9,9 0, LSRPM0L 85 SP T SP , ,8 SP 1T SP ,1 0, LSRPM0L1 105 SP 1T SP SP 150T SP ,8 0, LSRPM0LU1 125 SP 150T SP ,4 260 SPMA S ,9 0, LSRPM250SE 165 SPMA S ,1 0, LSRPM250SE 190 SPMA S SPMA S ,5 0, SPMA S LSRPM280SC 240 SPMA S ,5 0, SPMA 1401-S LSRPM280SD 290 SPMA 1401-S SPMA 1402-S , LSRPM280MK 25 SPMA 1402-S SPMA S , 2, SPMA S LSRPM15SP 90 SPMA S ,5 2, SPMA S The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. Torque curve no. 7

14 Torque-speed characteristics 000 Torque from 0 to 7 N.m Torque from 7 to 140 N.m 18 LSRPM L : 000 min -1 / 11,6 kw / 21 A LSRPM L : 000 min -1 / 10,2 kw / 18,8 A LSRPM L : 000 min -1 / 8,7 kw / 16,2 A LSRPM 160 LR : 000 min -1 / 44 kw / 82 A 1 LSRPM 160 MP : 000 min -1 / 7 kw / 69 A LSRPM 90 L : 000 min -1 / 7, kw / 1,5 A 22 LSRPM 90 SL : 000 min -1 / 5,8 kw / 11 A LSRPM 160 MP : 000 min -1 / 0 kw / 57 A 15 LSRPM 12 M : 000 min-1 / 2 kw / 44 A 16 LSRPM 12 M : 000 min -1 / 19,7 kw / 8 A 17 LSRPM 12 M : 000 min -1 / 15,8 kw / 0 A Torque from 140 to 65 N.m Torque from 65 to 700 N.m 7 LSRPM 225 ST1 : 000 min -1 / 115 kw / A 8 LSRPM 0 L1 : 000 min -1 / 105 kw / 9 A LSRPM 280 SC : 000 min -1 / 2 kw / 428 A 00 9 LSRPM 0 L : 000 min -1 / 85 kw / 166 A LSRPM 0 L : 000 min -1 / 65 kw / 129 A LSRPM 250ME : 000 min -1 / 170 kw / 8 A 11 LSRPM 0 L : 000 min -1 / 50 kw / 102 A 6 LSRPM 250SE : 000 min -1 / 145 kw / 279 A Torque from 700 to 1080 N.m 1 1 LSRPM 15 SP : 000 min -1 / 40 kw / 656 A LSRPM 280 MK : 000 min -1 / 290 kw / 579 A 800 LSRPM 280 MD : 000 min -1 / 260 kw / 495 A For operation at very low speeds, refer to the technical motor catalogue reference

15 Selection charts 000 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL 5,8 Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 5,5T SP ,8 19, ,1 SP 8T SP , , ,5 Torque curve no. 89,7 0, LSRPM90L 7, SP 8T SP , 2,2 1,5 19,5 91,1 0, LSRPML 8,7 LSRPML 10,2 LSRPML 11,6 LSRPM12M 15,8 LSRPM12M 19,7 LSRPM12M 2 LSRPM160MP 0 LSRPM160MP 7 LSRPM160LR 44 LSRPM0L 50 LSRPM0L 65 LSRPM0L 85 LSRPM0L1 105 LSRPM225ST1 115 SP 8T SP ,2 26,4 29,1 15, 16,8 SP 11T SP , ,0 16,2 24, SP 11T SP ,2 2 9, 18,8 2,1 SP 16T SP ,2 2 48,0 18,8 28,2 SP 11T SP ,6 7 40,7 21 2,1 SP 16T SP ,6 7 55,5 21 1,5 SP 16T SP , 48 52,8 29 1,9 SP 22T SP , ,0 0 45,0 SP 22T SP ,1 58 6,8 5 8,5 SP 27T SP ,7 6 94,5 8 57,0 SP 27T SP , ,2 4 47, SP T SP , ,0 SP T SP 40 29, , ,6 SP 40T SP , ,5 SP 40T SP , , ,8 SP 50T SP , ,5 SP 50T SP , , SP 60T SP , ,0 SP 60T SP ,4 SP75T SP ,9 SP 75T SP ,8 SP T SP ,0 SP T SP ,8 SP 1T SP SP 1T SP , SP150T SP SP 150T SP SPMA S ,1 0, ,6 0, ,6 0, ,1 0, ,6 0, ,1 0, ,6 0, ,1 0, ,1 0, ,2 0, ,9 0, , 0, ,7 0, ,8 0, LSRPM250SE 145 SPMA S , 0, LSRPM250ME 170 LSRPM280SC 2 LSRPM280MD 260 LSRPM280MK 290 LSRPM15SP 40 SPMA S SPMA S SPMA S SPMA 1401-S SPMA S SPMA 1401-S SPMA 1402-S SPMA 1401-S SPMA 1402-S SPMA S SPMA 1402-S SPMA S SPMA S ,4 0, ,6 0, , ,5 2, ,6 2, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 9

16 Torque-speed characteristics 2400 Torque from 0 to 8 N.m Torque from 8 to 145 N.m LSRPM L : 2400 min -1 / 9,5 kw / 17,7 A 19 LSRPM L : 2400 min -1 / 8,4 kw / 15,6 A LSRPM L : 2400 min -1 / 7,2 kw / 1,4 A 21 LSRPM 90 L : 2400 min -1 / 6 kw / 11,2 A LSRPM 160 LR : 2400 min -1 / 6 kw / 69 A 1 LSRPM 160 MP : 2400 min -1 / 1 kw / 58 A 14 LSRPM 160 MP : 2400 min -1 / 25 kw / 47 A 15 LSRPM 12 M : 2400 min-1 / 19,2 kw / 7 A LSRPM 90 SL : 2400 min -1 / 4,8 kw / 9,1 A LSRPM 12 M : 2400 min -1 / 16, kw / 1 A 17 LSRPM 12 M : 2400 min -1 / 1,1 kw / 25 A Torque from 145 to 400 N.m Torque from 400 to 755 N.m LSRPM 225 MR : 2400 min -1 / kw / 19 A 4 LSRPM 280 SD : 2400 min -1 / 190 kw / 5 A LSRPM 0 L : 2400 min -1 / 80 kw / 168 A 9 LSRPM 0 L : 2400 min -1 / 65 kw / 17 A LSRPM 250 ME : 2400 min -1 / 150 kw / 00 A 0 10 LSRPM 0 L : 2400 min -1 / 50 kw / 101 A LSRPM 250 SE : 2400 min -1 / 125kW / 24 A 11 LSRPM 0 L : 2400 min -1 / 7.5 kw / 75 A Torque from 755 to 1400 N.m LSRPM 15 SR : 2400 min -1 / 10 kw / 607 A 2 LSRPM 15 SP : 2400 min -1 / 285 kw / 567 A LSRPM 280 MK : 2400 min -1 / kw / 462 A For operation at very low speeds, refer to the technical motor catalogue reference

17 Selection charts 2400 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL 4,8 LSRPM90L 6 Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 4,5T SP ,6 18,4,2 8,8 9,68 SP 5,5T SP , ,5 9,1 1,65 SP 5,5T SP , ,10 SP 8T SP ,0 11,2 16,80 Torque curve no. 88,7 0, ,7 0, LSRPML 7,2 SP 8T SP ,2 29,0 4,5 1 19,50 90,2 0, LSRPML 8,4 LSRPML 9,5 LSRPM12M 1,1 LSRPM12M 16, LSRPM12M 19,2 LSRPM160MP 24,5 LSRPM160MP 1 LSRPM160LR 6 SP 8T SP ,2 2 5,2 15, 16,8 SP 11T SP ,4 49,5 15,6 2,40 SP 11T SP ,5 8 49,6 17,7 2,10 SP 16T SP 240 9,5 8 56,9 17,7 26,50 SP 11T SP ,0 4 47, 21 2,10 SP 16T SP 240 1, ,0 25 7,50 SP 16T SP , ,1 29 1,9 SP 22T SP , 65 97,5 1 46,5 SP 22T SP ,2 71,9 79,1 5 8,5 SP 27T SP , ,0 7 55,5 SP 27T SP ,9 90,6 99,7 4 47, SP T SP 40 24, , SP T SP 40 29, , ,60 SP 40T SP , , ,00 SP 40T SP , , 68 74,80 SP 50T SP , ,50 90,7 0, ,1 0, ,2 0, ,7 0, ,6 0, ,1 0, ,6 0, ,6 0, LSRPM0L 7,5 SP 50T SP , ,75 9,1 0, LSRPM0L 50 LSRPM0L 65 LSRPM0L 80 LSRPM225MR LSRPM250SE 125 SP 60T SP ,40 SP 75T SP ,45 SP 75T SP ,80 SP T SP ,65 SP T SP ,8 SP 1T SP SP 1T SP SP 150T SP SP 150T SP SPMA S ,7 0, ,0 0, ,4 0, ,6 0, ,1 0, LSRPM250ME 150 SPMA S , 0, LSRPM280SD 190 LSRPM280MK LSRPM15SP 285 LSRPM15SR 10 SPMA S SPMA S SPMA S SPMA 1401-S SPMA 1401-S SPMA 1402-S SPMA 1402-S SPMA S , , 1, ,4 2, , The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 11

18 Torque-speed characteristics 1800 Torque from 0 to 8 N.m Torque from 8 to 145 N.m LSRPM L : 1800 min -1 / 7,2 kw / 1,4 A 19 LSRPM L : 1800 min -1 / 6, kw / 11,8 A LSRPM L : 1800 min -1 / 5,4 kw / 10,2 A 21 LSRPM 90 L : 1800 min -1 / 4,5 kw / 8,5 A 22 LSRPM 90 SL : 1800 min -1 /,6 kw / 6,9 A LSRPM 160 LR : 1800 min -1 / 27, kw / 52 A 1 LSRPM 160 MP : 1800 min -1 / 2 kw / 44 A 14 LSRPM 160 MP : 1800 min -1 / 18,7 kw / 6 A 15 LSRPM 12 M : 1800 min-1 / 14,4 kw / 28 A 16 LSRPM 12 M : 1800 min -1 / 12, kw / 24 A 17 LSRPM 12 M : 1800 min -1 / 9,8 kw / 19 A Torque from 145 to 70 N.m Torque from 70 to 800 N.m 8 LSRPM 225 ST : 1800 min -1 / 70 kw / 142 A LSRPM 280 SD : 1800 min -1 / 150 kw / 295 A 00 9 LSRPM 0 L : 1800 min -1 / 55 kw / 111,5 A LSRPM 280 SC : 1800 min -1 / 125 kw / 248 A 0 10 LSRPM 0 L : 1800 min -1 / 40 kw / 82,5 A 11 LSRPM 0 L : 1800 min -1 / kw / 70,5 A LSRPM 250 ME : 1800 min -1 / kw / 4 A 7 LSRPM 225 MR : 1800 min -1 / 85 kw / 172 A Torque from 800 to 12 N.m LSRPM 15 SR : 1800 min -1 / kw / 457 A LSRPM 15 SP : 1800 min -1 / 195 kw / 87 A 900 LSRPM 280 MK : 1800 min -1 / 175 kw / 6 A For operation at very low speeds, refer to the technical motor catalogue reference

19 Selection charts 1800 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL,6 LSRPM90L 4,5 LSRPML 5,4 LSRPML 6, Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP,5T SP 1404,6 19,9 6,9 7,59 SP 4,5T SP 1405, ,5 6,9 10,5 SP 4,5T SP , , 8,5 9,68 SP 5,5T SP ,5 24 6,0 8,5 12,75 SP 4,5T SP , ,5 8,8 9,68 SP 5,5T SP ,4 29,0 4,4 10,2 12,10 SP 8T SP ,4 29,0 4,5 10,2 15,0 SP 5,5T SP ,9 1 4, ,10 SP 8T SP , 49,5 11,8 17,70 Torque curve no. 87,2 0, ,7 0, ,2 0, ,7 0, LSRPML 7,2 SP 8T SP ,2 8 55, 1,4 19,50 90,2 0, LSRPM12M 9,8 LSRPM12M 12, LSRPM12M 14,4 LSRPM160MP 18,7 LSRPM160MP 2 LSRPM160LR 27, LSRPM0L LSRPM0L 40 LSRPM0L 55 SP 8T SP , ,2 15, 16,8 SP 11T SP ,8 52 6,2 19 2,10 SP 16T SP 240 9, , ,50 SP 11T SP , ,5 21 2,10 SP 16T SP , 65 97,5 24 6,00 SP 16T SP , ,6 28 1,9 SP 22T SP , , SP 16T SP , ,0 29 1,90 SP 22T SP , ,6 5 8,50 SP 27T SP , ,5 6 54,00 SP 27T SP , ,9 4 47,0 SPT SP 40 2, , ,00 SP T SP 40 27, , ,60 SP 40T SP , , ,00 SP 40T SP , ,80 SP 50T SP 4402, ,5 102, SP 50T SP , ,5 91,0 SP 60T SP , ,5 119,60 SP 60T SP , ,40 SP 75T SP , ,5 161,6 90,2 0, ,7 0, ,1 0, ,6 0, ,1 0, ,1 0, ,5 0, ,2 0, ,5 0, LSRPM225ST 70 SP 75T SP , ,8 SP T SP , ,9 9,9 0, LSRPM225- SP T SP , ,80 85 MR SP 1T SP , ,4 94,1 0,2 2 7 LSRPM250ME SP 1T SP SP 150T SP ,4 0, LSRPM280SC 125 SP 150T SP SPMA S ,6 0, LSRPM280SD 150 SPMA S , LSRPM280MK 175 SPMA S SPMA S ,4 1,8 56 LSRPM15SP 195 SPMA S ,5 2, LSRPM15SR SPMA S SPMA 1401-S ,8 2, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 1

20 Torque-speed characteristics 1500 Torque from 0 to 8 N.m Torque from 8 to 145 N.m LSRPM L : 1500 min -1 / 6 kw / 11,2 A 19 LSRPM L : 1500 min -1 / 5,2 kw / 9,9 A LSRPM L : 1500 min -1 / 4,5 kw / 8,6 A 21 LSRPM 90 L : 1500 min -1 /,7 kw / 7,2 A 22 LSRPM 90 SL : 1500 min -1 / kw / 5,9 A LSRPM 160 LR : 1500 min -1 / 22,8 kw / 4 A 1 LSRPM 160 MP : 1500 min -1 / 19,2 kw / 0 A 14 LSRPM 160 MP : 1500 min -1 / 15,6 kw / 0 A 15 LSRPM 12 M : 1500 min-1 / 12 kw / 2 A 16 LSRPM 12 M : 1500 min -1 / 10,2 kw / 19,9 A 17 LSRPM 12 M : 1500 min -1 / 8,2 kw / 16 A Torque from 145 to 50 N.m Torque from 50 to 800 N.m 8 LSRPM 0 LU : 1500 min -1 / 55 kw / 105 A LSRPM 280 SD : 1500 min -1 / 125 kw / 26 A 00 9 LSRPM 0 L : 1500 min -1 / 40 kw / 78,5 A LSRPM 280 SC : 1500 min -1 / 105 kw / 216 A 0 10 LSRPM 0 L : 1500 min -1 / kw / 67 A 11 LSRPM 0 L : 1500 min -1 / 25 kw / 51,5 A LSRPM 250 ME : 1500 min -1 / 85 kw / 169 A 7 LSRPM 225 MR : 1500 min -1 / 70 kw / 142 A Torque from 800 to 1400 N.m LSRPM 15 MR : 1500 min -1 / 2 kw / 48 A LSRPM 15 SP : 1500 min -1 / 175 kw / 55 A LSRPM 280 MK : 1500 min -1 / 145 kw / 294 A For operation at very low speeds, refer to the technical motor catalogue reference

21 Selection charts 1500 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL LSRPM90L,7 LSRPML 4,5 LSRPML 5,2 LSRPML 6 LSRPM12M 8,2 LSRPM12M 10,2 LSRPM12M 12 LSRPM160MP 15,6 LSRPM160MP 19,2 LSRPM160LR 22,8 LSRPM0L 25 LSRPM0L LSRPM0L 40 LSRPM0LU 55 LSRPM225MR 70 LSRPM250ME 85 LSRPM280SC 105 LSRPM280SD 125 Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 2,5T SP 140 2, ,6 5 5,50 SP,5T SP ,5 5,8 8,70 SP,5T SP 1404,5 2 25, 6,9 7,59 SP 4,5T SP 1405,7 24 6,0 7,2 10,80 SP 4,5T SP ,5 29 2,6 8,6 9,68 SP 5,5T SP ,5 29 4,5 8,6 12,90 SP 5,5T SP ,2 40, 9,9 12,10 SP 8T SP ,2 49,5 9,9 14,85 SP 5,5T SP ,0 8 41, ,10 SP 8T SP , ,50 SP 8T SP ,8 49,5 54,5 15, 16,8 SP 11T SP , , ,00 SP 11T SP , ,5 19,9 2,10 SP 16T SP , ,5 19,9 29,85 SP 11T SP , ,9 21 2,1 SP 16T SP ,0 2 4,5 SP 16T SP , ,5 29 1,9 SP 22T SP , ,5 0 45,00 SP 22T SP , ,5 5 8,50 SP 27T SP , ,0 7 55,50 SP 27T SP , ,5 4 47,0 SP T SP 40 22, ,5 4 64,50 SP T SP 40 25, ,5 61,60 SP 40T SP ,5 74,60 SP 40T SP 4401, ,80 SP 50T SP ,10 SP 50T SP ,5 91,0 SP 60T SP ,5 11,8 SP 60T SP , ,4 SP 75T SP SP 75T SP , ,80 SP T SP ,9 SP T SP , ,80 SP 1T SP SP 1T SP , SP 150T SP SP 150T SP SPMA S Torque curve no. 85, 0, ,2 0, ,2 0, ,2 0, ,7 0, ,2 0, ,7 0, ,2 0, ,7 0, ,1 0, ,7 0, ,1 0, ,9 0, , 0, ,6 0, ,5 0, ,6 0, , LSRPM280MK 145 SPMA S , 1,8 56 LSRPM15SP 175 LSRPM15MR 2 SPMA S SPMA S SPMA S SPMA 1401-S ,6 2, ,0 2, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 15

22 Torque-speed characteristics 900 Torque from 0 to 8 N.m Torque from 8 to 145 N.m LSRPM L : 900 min -1 /,6 kw / 7 A LSRPM L : 900 min -1 /,1 kw / 6,2 A LSRPM L : 900 min -1 / 2,7 kw / 5,4 A LSRPM 90 L : 900 min -1 / 2,2 kw / 4,6 A LSRPM 90 SL : 900 min -1 / 1,8 kw /,8 A LSRPM 160 LR : 900 min -1 / 1,7 kw / 27 A LSRPM 160 MP : 900 min -1 / 11,5 kw / 22 A LSRPM 160 MP : 900 min -1 / 9,4 kw / 18, A LSRPM 12 M : 900 min -1 / 7,2 kw / 14, A LSRPM 12 M : 900 min -1 / 6,1 kw / 12, A LSRPM 12 M : 900 min -1 / 4,9 kw / 9,9 A Torque from 145 to 50 N.m Torque from 50 to 800 N.m 8 LSRPM 0 LU : 900 min -1 / kw / 65 A LSRPM 280 SD : 900 min -1 / 75 kw / 145 A 00 9 LSRPM 0 L : 900 min -1 / 25 kw / 50,2 A LSRPM 280 SD : 900 min -1 / 60 kw / 112 A 0 10 LSRPM 0 L : 900 min -1 / kw / 42,5 A 11 LSRPM 0 L : 900 min -1 / 15 kw /,5 A LSRPM 250 ME : 900 min -1 / 50 kw / 98 A Torque from 800 to 180 N.m LSRPM 250 SE : 900 min -1 / 40 kw / 76 A LSRPM 15 MR : 900 min -1 / 10 kw / 265 A LSRPM 15 SP : 900 min -1 / kw / 7 A LSRPM 280 MK : 900 min -1 / 85 kw / 175 A For operation at very low speeds, refer to the technical motor catalogue reference

23 Selection charts 900 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL 1,8 LSRPM90L 2,2 LSRPML 2,7 LSRPML,1 LSRPML,6 LSRPM12M 4,9 LSRPM12M 6,1 LSRPM12M 7,2 LSRPM160MP 9,4 LSRPM160MP 11,5 LSRPM160LR 1,7 LSRPM0L 15 LSRPM0L LSRPM0L 25 LSRPM0LU LSRPM250SE 40 LSRPM250ME 50 LSRPM280SD 60 LSRPM280SD 75 LSRPM280MK 85 LSRPM15SP LSRPM15MR 10 Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 2T SP ,8 19,9,8 4,18 SP 2,5T SP 140 1, ,5,8 5,70 SP 2,5T SP 140 2, ,7 4,6 5,50 SP,5T SP , ,6 6,90 SP 2,5T SP 140 2,5 26, ,50 SP,5T SP , ,4 8,10 SP,5T SP 1404,1 40 6,2 7,59 SP 4,5T SP 1405,1 50 6,2 9,0 SP,5T SP 1404,5 7,5 41 6,9 7,59 SP 4,5T SP 1405, ,50 SP 4,5T SP , ,8 9,68 SP 5,5T SP , ,9 12,10 SP 8T SP , ,9 14,85 SP 5,5T SP , ,10 SP 8T SP , , 18,45 SP 8T SP2401 7, , 16,8 SP 11T SP , , 21,5 SP 8T SP , , 16,8 SP 11T SP , , 2,1 SP 16T SP 240 9, , 27,5 SP 11T SP , ,1 SP 16T SP , ,0 SP 16T SP 240 1, ,9 SP 22T SP 401 1, ,5 SP 22T SP ,5 8,5 SP 27T SP ,5 48,5 SP 27T SP ,5 47, SP T SP ,5 61,6 SP T SP ,2 61,6 SP 40T SP ,2 72,8 SP T SP 40 28, ,6 SP 40T SP ,8 SP 50T SP , SP 50T SP , SP 60T SP SP 50T SP , , SP 60T SP ,4 SP 75T SP SP 60T SP ,4 SP 75T SP SP 75T SP ,8 SP T SP SP T SP , ,8 SP 1T SP SP 1T SP SP 150T SP SP 150T SP SPMA S Torque curve no. 80,4 0, , 0, , 0, , 0, ,2 0, ,2 0, ,2 0, ,2 0, ,2 0, ,7 0, ,7 0, ,8 0, ,8 0, ,5 0, , ,6 0, ,9 0, , 0, , , , 2, ,7 2, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 17

24 Torque-speed characteristics 750 Torque from 0 to 7 N.m Torque from 7 to 145 N.m LSRPM 160 LR : 750 min -1 / 11,4 kw / 22 A LSRPM 160 MP : 750 min -1 / 9,6 kw / 19 A LSRPM 160 MP : 750 min -1 / 7,8 kw / 15,6 A LSRPM 160 LR : 750 min -1 / 11,4 kw / 22 A LSRPM 160 MP : 750 min -1 / 9,6 kw / 19 A LSRPM 160 MP : 750 min -1 / 7,8 kw / 15,6 A LSRPM 12 M : 750 min -1 / 6 kw / 12,2 A LSRPM 12 M : 750 min -1 / 5,1 kw / 10,5 A LSRPM 12 M : 750 min -1 / 4,1 kw / 8,5 A LSRPM 12 M : 750 min -1 / 6 kw / 12,2 A LSRPM 12 M : 750 min -1 / 5,1 kw / 10,5 A LSRPM 12 M : 750 min -1 / 4,1 kw / 8,5 A Torque from 145 to 45 N.m Torque from 45 to 890 N.m LSRPM 0 LU : 750 min -1 / 27 kw / 5 A 8 LSRPM 0 L : 750 min -1 / 21 kw / 42,5 A 9 LSRPM 0 L : 750 min -1 / 16,5 kw / 4,5 A 10 LSRPM 0 L : 750 min -1 / 12,5 kw / 29 A LSRPM 280 MD : 750 min -1 / 70 kw / 1 A LSRPM 280 SD : 750 min -1 / 55 kw / 107 A LSRPM 250 SE : 750 min -1 / 40 kw / 80 A 6 LSRPM 250 SE : 750 min -1 / kw / 65 A Torque from 890 to 1400 N.m LSRPM 15 MR : 750 min -1 / 110 kw / 225,5 A LSRPM 15 SP : 750 min -1 / 85 kw / 170,5 A For operation at very low speeds, refer to the technical motor catalogue reference

25 Selection charts 750 Power supply upstream from the 400 V drive Designation Rated LSRPM90SL 1,4 LSRPM90L 1,8 LSRPML 2,1 Drive designation Available Torque Current 1 Minimum Total switching rated maximum rated maximum efficiency frequency 2 Moment of inertia weight M n M max I n I max/ 60sec F D J IM B kw LS CT kw N.m N.m A A khz % kg.m 2 kg SP 1,5T SP ,2 16,8 18,5 2,8,08 SP 2T SP , ,50 SP 2T SP ,8 2 26,0,7 4,18 SP 2,5T SP 140 1,8 2 5,7 5,6 SP 2,5T SP 140 2, ,4 5,5 SP,5T SP , ,4 6,6 Torque curve no. 78,4 0, , 0, , 0, LSRPML 2,5 SP 2,5T SP 140 2,5 2, ,5 SP,5T SP , ,5 8, 0, LSRPML 2,8 SP,5T SP , ,7 8,5 84, 0, SP,5T SP 1404, ,9 7,59 LSRPM12M 4,1 SP 4,5T SP , ,5 9,68 84, 0, SP 5,5T SP , ,5 14, LSRPM12M 5,1 LSRPM12M 6 LSRPM160MP 7,8 LSRPM160MP 9,6 LSRPM160LR 11,4 LSRPM0L 12,5 LSRPM0L 16,5 LSRPM0L 21 LSRPM0LU 27 LSRPM250SE LSRPM250SE 40 LSRPM280SD 55 LSRPM280MD 70 LSRPM15SP 85 LSRPM15MR 110 SP 4,5T SP , ,8 9,68 SP 5,5T SP , ,5 12,1 SP 8T SP , ,5 15,8 SP 5,5T SP , ,1 SP 8T SP ,2 18, SP 8T SP , ,7 15, 16,8 SP 11T SP , ,6 2 SP 11T SP , , 19 2,1 SP 16T SP 240 9, ,5 SP 11T SP , ,1 SP 16T SP , ,0 SP 16T SP , ,9 SP 22T SP , ,1 SP 22T SP , ,5 8,5 SP 27T SP , ,5 50,0 SP 22T SP , ,5 SP 27T SP ,5 47, SP T SP ,5 61,6 SP 27T SP , SP T SP ,6 SP 40T SP ,8 SP T SP 40 28, ,6 SP 40T SP ,8 SP 50T SP SP 40T SP ,8 SP 50T SP , SP 60T SP SP 50T SP , , SP 60T SP 440 5, ,4 SP 75T SP SP 75T SP ,8 SP T SP SP T SP , ,8 SP 1T SP ,5 247 SP 1T SP SP 150T SP , , 0, ,2 0, ,2 0, ,2 0, ,7 0, ,7 0, , , , 0, ,2 0, ,6 0, , , , ,4 2, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 19

26 Torque-speed characteristics 75 Torque from 0 to 4 N.m LSRPM L : 75 min -1 / 1, kw / A LSRPM L : 75 min -1 / 1,2 kw / 2,6 A LSRPM L : 75 min -1 / 1 kw / 2, A LSRPM 90 L : 75 min -1 / 0,8 kw / 1,9 A 11 LSRPM 90 SL : 75 min-1 / 0,7 kw / 1,6 A Torque from 4 to 10 N.m LSRPM 12 M : 75 min -1 / 2, kw / 5,1 A 6 LSRPM 160 LR : 75 min -1 / 5,1 kw / 10,6 A LSRPM 160 MP : 75 min -1 / 4, kw / 9 A LSRPM 160 MP : 75 min -1 /,5 kw / 7,4 A LSRPM 12 M : 75 min -1 / 2,7 kw / 5,8 A LSRPM 12 M : 75 min -1 / 1,8 kw / 4,2 A For operation at very low speeds, refer to the technical motor catalogue reference 4122.

27 Selection charts 75 Power supply upstream from the 400 V drive Designation Rated Drive designation Available rated Torque Current 1 Minimum maximum rated maximum Total switching efficiency frequency 2 weight M n M max I n I max/ 60sec F D IM B kw LS CT kw N.m N.m A A khz % kg LSRPM90SL 0,7 SP 1,5T SP , ,5 1,6 2,4 68, LSRPM90L 0,8 SP 1,5T SP , ,9,08 72,5 17 LSRPML 1,0 LSRPML 1,2 LSRPML 1, LSRPM12M 1,8 LSRPM12M 2, SP 1,5T SP , ,,08 SP 2T SP , ,,45 SP 1,5T SP , ,6,08 SP 2T SP , ,6,90 SP 1,5T SP ,25 1,7 5 2,8,08 SP 2T SP , ,50 SP 2T SP ,66 42,5 47,8 4,18 SP 2,5T SP 140 1, ,2 6,0 SP 2,5T SP 140 2,25 56, ,50 SP,5T SP , ,1 7,60 Torque curve no. 7, , , , , LSRPM12M 2,7 SP,5T SP , ,8 8,70 80, LSRPM160MP,5 SP 4,5T SP 1405, ,4 11,1 82, 60 1 LSRPM160MP 4, SP 4,5T SP , ,8 9,68 SP 5,5T SP , ,5 8, LSRPM160LR 5,1 SP 5,5T SP , ,6 12,1 84, The drive parameters must comply with the rated current values to ensure thermal control is maintained, as must the maximum current values to avoid the risk of demagnetisation. 2 In case of a usage with a switching frequency above the minimum switching frequency F D, please refer to the table on page 2 to determine the current values. = efficiency X drive efficiency. 21

28 22 LSRPM - UNIDRIVE SP

29 General drive characteristics Power supply characteristics Environment Characteristics Level Power supply voltage -phase supply: 80V -10% to 480V +10% Input frequency Number of -ups Output frequency 48 to 65 Hz maximum / hr 0 to 000Hz Main electrical characteristics Characteristics Protection Operating temperature Altitude Level IP with cable glands installed 0C to +40 C, up to 50 C with derating 0 m without derating > 0 m: operating temperature derating of 0,6 C per m Drive designation Accepted current value I co (A) at switching frequency of LS CT khz 4 khz 6 khz 8 khz 12 khz 16 khz SP 1,5 T SP ,8 2,8 SP 2 T SP 1402,8,8 SP 2,5 T SP SP,5T SP ,9 6,9 5,9 SP 4,5 T SP ,8 8,8 7,4 5,7 SP 5,5 T SP ,4 5,7 SP 8 T SP , 15, 12,7 10,1 SP 11 T SP ,5 16,7 12,7 10 SP 16 T SP ,2 2, ,8 SP 22 T SP ,5 26, 21 SP 27 T SP ,9 28,6 22,5 SP T SP ,4 44,6 7,9 28,6 - SP 40T SP SP 50T SP SP 60T SP ,1 78,8 - SP 75T SP ,1 - SP T SP SP 1T SP ,1 - SP 150T SP ,4 157,7 - SPMA S SPMA S SPMA 1401-S SPMA 1402-S SPMA S SPMA S SPMA S I co : continuous output current. 2

30 Drive dimensions and weight Drive designation Dimensions (mm) L H P Weight 1.5T to 5.5T T to 16T T to T T to 60T T to T T to 150T SPMA S SPMA S SPMA 1401-S SPMA 1402-S SPMA S SPMA S SPMA S Please consult Leroy-Somer 24

31 dimensions Forced ventilation B and B5 Incremental encoder B and B5 Type Shaft end dimensions D E DA EA LSRPM 90SL/L 28j6 60 Please consult LSRPM L 2k6 80 Leroy-Somer LSRPM 12M 8k j6 60 LSRPM 160MP/LR 48k k6 80 LSRPM 0 L//L1/LU/LU1 55m m6 110 LSRPM 225 ST/ST1/SR/SR1/MR 60m m6 140 LSRPM 250 SE/ME 65m m6 140 LSRPM 280 SC/SD 70m m6 140 LSRPM 280 MD 75m m6 140 LSRPM 280 MK 75m m6 140 LSRPM 15 SP/SR 80m m6 170 LSRPM 15 MR 85m m6 170 Main dimension Type AB AC HD LB LB1 LB2 IEC flange LSRPM 90SL/ L FF165 LSRPM L FF215 LSRPM 12 M FF265 LSRPM 160 MP/LR FF00 LSRPM 0L FF50 LSRPM 0 L FF50 LSRPM 0 LU FF50 LSRPM 225 ST FF400 LSRPM 225 ST FF400 LSRPM 225 SR FF400 LSRPM 225 SR FF400 LSRPM 225 MR FF400 LSRPM 250 SE/ME FF500 LSRPM 280 SC FF500 LSRPM 280 SD/MD FF500 LSRPM 280 MK FF500 LSRPM 15 SP FF600 LSRPM 15 SR/MR FF600 25

32 Adapting the drive and motor when installing Supplies network and equipment incorporating electronics may generate disturbance affecting each element: motor, drive and network. This chapter Adapting the drive and motor when installing is a rough guide to choosing the eventual options required to suit the use and installation. General conditions The selection guide is used: To conform the installation conform to the wiring instructions, To the following specifications with a standard LSRPM motor - Mains imbalance 2%, - Mains voltage 400 to 480 V ± 10 %, - Drive switching frequency: indicated in the selection charts, - insulation Class F, - Voltage peaks generated at the motor terminals blocks 1500 V, - motor dv / dt < 500 V/ms. Special conditions To satisfy the demands of specific applications and harsher operating conditions, LEROY-SOMER offers additional options (ask for estimate): dv / dt filter, Reinforced insulation (motor), Insulated bearings for motors frame size 0 mm. Risk assessment: OI drive emergency shutdown, Damage to the motor insulation, Reduced motor bearing life, according to the three parameters DC bus voltage U, motor cable length l and motor rating P. Very low risk High risk NB: In special cases our technicians can conduct an in-depth study of the installation to guarantee that it works correctly (ask for estimate). 26

33 Option selection guide Adapting the drive and motor to the installation dv /dt filter: High frequency repetitive peak voltage and resulting circulating current in the cables can cause an «OI» emergency shutdown indicated on the drive. Use of the filter is recommended in the following cases: - Application with braking and when the cable length is more than 0 meters. - In applications where the cable length is more than the maximum value indicated in the chart below (this maximum length depends on the drive rating and the switching frequency F D ). UNIDRIVE SP rating 1,5 T 2,8 2 T,8 2,5 T 5,5T 6,9 4,5 T 8,8 5,5 T 11 8 T 15, 11 T T T 5 27 T 4 T 56 40T 68 50T 8 60T T 18 T 168 1T 5 150T 26 SPMA S 90 SPMA S 449 SPMA 1401-S 585 SPMA 1402-S 674 SPMA S 780 SPMA S 899 SPMA S 976 Max. cumulative* length of cables (* : for motors or cables in parallel) Ico FD 2 & khz FD,5 & 4 khz FD 4,5 & 5 khz FD 5,5 & 6 khz (A) m m m m to be advised Reinforced insulation Voltage peaks generated at the terminals on each pulse in the signal can have a destructive effect on the winding. These peaks, which are related to the value of the supply voltage upstream of the drive, can cause the turns of the winding to short-circuit. For peak values greater than 1500 V, the SIR (reinforced winding insulation) option is available over the entire. The permitted value of the voltage peak at the motor terminals would then be 00 V. Use of this option is recommended in the case of an application involving braking and when the cable length is more than 0 meters. UT 02 15V Modul Single Ended Can be incorporated on the driver encoder input, and used to manage the motor speed/ position feedback. It manages the Hall effect sensors (as standard for the LSRPM). 27

34 Designation Drive SP 1 T Option(s) 2 Type Rating (kva) 1.5 to 150 T: 400 to 480V TM: 500 to 575V TH: 500 to 690V 2 described in this document (add UT 02 for the speed return Modular drive SPMA S Option(s) 2 2 Type SPMA: modular drive to 480V to 575V to 690V Current rating S: 6 pulses T: 12 pulses R: Regen 1: simple rectifier With braking transistor Number of modules in parallel 2 described in this document (add UT 02 for the speed return 5500 LSRPM 280 L 140 kw IM 1 (IM B) 400 V IP 55 Range Shaft height Rated output Power supply Protection Series designation Mounting arments IEC 4-7 Housing designation and manufacturers index 28

35 29

36 0 LSRPM - UNIDRIVE SP

37 1

38 MOTEURS LEROY-SOMER ANGOULEME CEDEX-FRANCE RCS ANGOULÊME S.A. au capital de