Specialty Carbon Blacks

Transcription

1 Specialty Carbon Blacks Technical Data Asia Pacific Focused. I nnovative. R esponsive.

2 Analytical Test Methods Test Method ISO DIN ASTM Specialty Carbon Blacks Recommended for Coating Applications Method for Determining the Surface Area International Organization for Standardization German Institute for Standardization BET Surface Area ISO 4652 D 6556 Iodine Adsorption ISO 1304 DIN D 1510 Method for Determining the Structure Oil Absorption Number (OAN) ISO 4656 D 2414 Method for Characterizing the Carbon Black Pigment Surface American Society for Testing and Materials Jetness M Y DIN Relative Tint Strength IRB 3 = 100 % ASTM D 3265 Volatile 950 C DIN OAN ASTM D 2414 ph Value ISO Ash ASTM D 1506 BET ASTM D 6556 Average Primary Particle Size TGZ3 Automotive Coatings Electro Deposition Coatings General Industrail Coating Metallics Decorative Coating Wet PU Coloring Antistatic and Conductive Coating Solvent Borne Waterborne Powder Coating Volatile Matter at 950 C DIN % % ml/100 g % m² / g nm ph Value ISO D 1512 Method for Determining Impurities Ash Content ISO D 1506 COLOUR BLACK FW 255 HCF 307* COLOUR BLACK FW 171 1) HCF COLOUR BLACK FW 285 1) HCG Colorimetric Properties COLOUR BLACK FW 200 HCG Blackness Value M Y of Powder Specialty Carbon Black DIN COLOUR BLACK FW 2 HCG COLOUR BLACK FW 1 HCG Relative Blackness Value MYr & Absolute Contribution of Hue internal method PA 1540 submitted for ISO Standard COLOUR BLACK FW 182 HCG COLOUR BLACK S 170 1) MCG Tint Strength of Carbon Black ISO 5435 D 3265 Methods are not strictly equivalent COLOUR BLACK S 160 MCG HIBLACK 970LB HCF HIBLACK 930L 1) HCF HIBLACK 890 MCF HIBLACK 600L MCF HIBLACK 20L 1) RCF HIBLACK 170 1) LCF LAMPBLACK 101 LB NEROX 605 1) RCF NEROX 600 1) RCF NEROX 505 1) RCF NEROX 510 1) RCF NEROX ) LCF < NEROX ) LCF PRINTEX L6 RCF PRINTEX L RCF PRINTEX U RCG PRINTEX V 1) RCG PRINTEX XE2-B ECB PRINTEX 200 3) LCF PRINTEX G LCF SPECIAL BLACK 6 HCG SPECIAL BLACK 5 MCG SPECIAL BLACK 4 RCG SPECIAL BLACK 4A 1) 7) RCG SPECIAL BLACK 250 1) LCF SPECIAL BLACK 100 1) LCF * In Waterborne system 1) Only available as powder Only available as beaded Specialty Carbon Black 3) Electrical Conductivity of the aqueous Extract 100μS/cm 7) Volatile Matter 105 C approx.7.5% Specific Gravity of Specialty Carbon Black g / cm³ Very high electrical conductivity: PRINTEX XE2-B Very high electrical resistivity: SPECIAL BLACK 4 The data for the beaded blacks may deviate from the given values. HCG High Color Gas HCF High Color Furnace MCG Medium Color Gas MCF Medium Color Furnace RCG Regular Color Gas RCF Regular Color Furnace LCF Low Color Furnace LB Lamp Black ECB Extra Conductive Black 2 3

3 Orion Specialty Carbon Blacks Recommended for Polymer Applications Blackness Value M Y following DIN Relative Tint Strength IRB 3 = 100 % following ASTM D 3265 Volatile Matter at 950 C following DIN Oil Absorption Number following ASTM D 2414 ph Value following ISO Ash Content following ASTM D 1506 BET Surface Area following ASTM D 6556 % % ml / 100 g % m²/g nm Average Primary Particle Size following internal Method TGZ3 Reference Selected Polymers Polyolefines PE, PP, Copo Biopolymers PLA Styrene Polymers PS, SAN, ABS, ASA Polyamides PA6, PA6.6, PA12 Polyesters PET, PBT Polyvinylchlorides PVC-P, PVC-U Engineered Polymers PMMA, PC, Blends Thermosets UP, EP Typical Applications Insulation & Foams EPS, PUR, PP, PE Wire & Cables PE-Copo Pipes PE, PP, PA, PVC Films PE, PP, Copo, PVC Fibres PET, PA, PP Adhesive & Sealants PUR, PIB, Polysulfide, Silicons, MS Polymers Masterbatches & Compounds HCG High Color Gas RCG Regular Color Gas HCF High Color Furnace MCF Medium Color Furnace RCF Regular Color Furnace LCF Low Color Furnace LB Lamp Black TB Thermal Black CF Conductive Furnace ECB Extra Conductive Black AROSPERSE 26 RCF AROSPERSE 138 RCF ) AROSPERSE 11 RCF AROSPERSE 15 TB HIBLACK 970LB HCF HIBLACK 930L HCF ) HIBLACK 890 HCF HIBLACK 600L MCF HIBLACK 50L MCF HIBLACK 49L MCF HIBLACK 45LB RCF HIBLACK 40B2 CF HIBLACK 420B CF HIBLACK 30 RCF HIBLACK SP1 RCF HIBLACK 20 RCF HIBLACK 5L RCF , ) HIBLACK 150B LCF HIBLACK 160B LCF LAMP BLACK 101 LB PRINTEX 90 HCF PRINTEX 85 MCF ) PRINTEX 80 MCF ) PRINTEX L6 RCF ) PRINTEX L RCF PRINTEX HV RCF ) PRINTEX alpha, alpha-a RCF ) 5) 6) PRINTEX Zeta A RCF ) PRINTEX Nature RCF ) PRINTEX XE 2 B ECB AROSPERSE 26 AROSPERSE 138 AROSPERSE 11 AROSPERSE 15 HIBLACK 970LB HIBLACK 930L HIBLACK 890 HIBLACK 600L HIBLACK 50L HIBLACK 49L HIBLACK 45LB HIBLACK 40B2 HIBLACK 420B HIBLACK 30 HIBLACK SP1 HIBLACK 20 HIBLACK 5L HIBLACK 150B HIBLACK 160B LAMP BLACK 101 PRINTEX 90 PRINTEX 85 PRINTEX 80 PRINTEX L6 PRINTEX L PRINTEX HV PRINTEX alpha, alpha-a PRINTEX Zeta A PRINTEX Nature PRINTEX XE 2 B 1) Only avaliable as powder Only available as Beaded Specialty Carbon Black 4) Total Sulfur content 0.1 %, Electrical Conductivity of the aqueous Extract 150 µs / cm 5) Following products, used for food contact application, which complies with 21CFR (FDA) can be found in a separate brochure: PRINTEX F 85 PRINTEX F 80 PRINTEX F alpha PRINTEX F P 6) Following products, used for Spin Fibres, can be found in a separate brochure: PRINTEX L 6 SQ only available as beaded Specialty Carbon Black PRINTEX alpha SQ only available as beaded Specialty Carbon Black 8) Content of renewable material > 85 % calculated Jet Black Coloring Coloring Tinting Conductivity UV-Stabilizing Reinforcement / Rheology Specific gravity of Specialty Carbon Blacks: g/cm 3 The data for beaded blacks may deviate from the given values 4 5

4 Orion Specialty Carbon Blacks Recommended for Printing Inks and Non Impact Printing Applications Blackness Value M Y following DIN Relative Tint Strength IRB 3 = 100 % following ASTM D 3265 Volatile Matter at 950 C following DIN Oil Absorption Number following ASTM D 2414 ph Value following ISO Ash Content following ASTM D 1506 BET Surface Area following ASTM D 6556 % % ml / 100 g % m²/g nm Average Primary Particle Size following internal Method TGZ3 Product Safety Issues for NIP specified additionally Sheetfed / Letterpress Heatset Coldset Publication Gravure Inks Liquid Inks (Flexo / Gravure) Solvent Based Liquid Inks (Flexo / Gravure) Water Based Screen Inks UV Curing Inks UV Curing Inkjet Inks Aqueous Inkjet Inks Non-aquous Inkjet Inks Toner Type Type HIBLACK 890 HCF HIBLACK 890 HIBLACK 41Y 1) RCF HIBLACK 41Y 1) HIBLACK 40L 1) RCF HIBLACK 40L 1) HIBLACK 30 RCF HIBLACK 30 HIBLACK 30L 1) RCF HIBLACK 30L 1) HIBLACK 20 RCF HIBLACK 20 HIBLACK 20L 1) RCF HIBLACK 20L 1) HIBLACK 200L 1) RCF HIBLACK 200L 1) HIBLACK 10 1) RCF HIBLACK 10 1) HIBLACK 170 1) LCF HIBLACK 170 1) LAMP BLACK 101 LB LAMP BLACK 101 NEROX 600 1) RCF NEROX 600 1) NEROX 605 1) RCF NEROX 605 1) NEROX 510 1) RCF NEROX 510 1) NEROX 505 1) RCF NEROX 505 1) NEROX ) RCF NEROX ) NEROX 305 1) RCF NEROX 305 1) NEROX ) LCF NEROX ) NEROX ) LCF NEROX ) HCG High Color Gas MCG Medium Color Gas RCG Regular Color Gas HCF High Color Furnace RCF Regular Color Furnace LCF Low Color Furnace LB Lamp Black NIPex 180IQ 1) HCG NIPex 170IQ 1) MCG NIPex 160IQ 1) MCG NIPex 150 RCG NIPex 90 1) HCF NIPex 60 1) RCF NIPex 35 LCF PRINTEX U RCG PRINTEX 45 RCF PRINTEX 35 LCF PRINTEX 25 LCF PRINTEX Nature 8) RCF SPECIAL BLACK 4 RCG SPECIAL BLACK 4A 1) 7) RCG SPECIAL BLACK 350 1) LCF SPECIAL BLACK 535 LCF NIPex 180IQ 1) NIPex 170IQ 1) NIPex 160IQ 1) NIPex 150 NIPex 90 1) NIPex 60 1) NIPex 35 PRINTEX U PRINTEX 45 PRINTEX 35 PRINTEX 25 PRINTEX Nature 8) SPECIAL BLACK 4 1) 7) SPECIAL BLACK 4A SPECIAL BLACK 350 1) SPECIAL BLACK 535 1) Only available as powder Only available as beaded Specialty Carbon Black 7) Volatile Matter 105 C approx. 7.5 % 8) Content of renewable material > 85 % calculated Especially recommended Well suitable Specific gravity of Specialty Carbon Blacks: g / cm 3 The data for beaded blacks may deviate from the given values. 6 7

5 Focused. I nnovative. R esponsive. The Americas Orion Engineered Carbons LLC 4501 Magnolia Cove Drive, Suite 106 Kingwood, TX USA Phone AMERICAS@orioncarbons.com Europe/ Middle East/ Africa Orion Engineered Carbons GmbH Hahnstraße Frankfurt am Main Germany Phone EMEA@orioncarbons.com Asia Pacif ic Orion Engineered Carbons Trading (Shanghai) Co., Ltd. BM Intercontinental Business Centre, Room Yutong Road Shanghai, China Phone APAC@orioncarbons.com Global Corporate Headquarters Orion Engineered Carbons S.A., 15 Rue Edward Steichen, 2540 Luxembourg, Phone All information and statements contained herein are believed to be accurate, however Orion Engineered Carbons GmbH (as well as all other Orion Engineered Carbons group companies including Orion Engineered Carbons SA), its agents and/or affiliates give no warranty with respect thereto, including but not limited to any results to be obtained or the non-infringement of any proprietary right. Use or application of such information or statements or the material or systems described herein is at user s sole discretion and risk, and consequently user acknowledges that Orion Engineered Carbons GmbH (as well as all other Orion Engineered Carbons group companies including Orion Engineered Carbons SA), its agents and/or affiliates shall bear no responsibility or liability for same. Nothing herein shall be construed as a license of or recommendation for use, especially with concern to the potential infringement of any proprietary right. All sales are subject to the respective Standard Terms & Conditions of Sale issued by Orion Engineered Carbons GmbH or - as the case may be - another Orion Engineered Carbons group company, including but not limited to the Limited Warranty clauses contained therein Orion Engineered Carbons GmbH OEC-TD /2014