Kämmer Series Split Body Valves

Transcription

1 flowserve.com Kämmer Series Split Body s

2 Description Kämmer Series are split body style valves manufactured from forged material. This engineering design easily adapts to meet application requirements. Furthermore this design makes the valves easy to clean and maintain. Series globe valve Series way valve Series angle valve

3 flowserve.com Technical Data body style Characteristics Globe, angle, 3-way Equal%, Linear, On - Off Rangeability See table on page 5 Seat leakage Material for plug / seat See table on page 5 PTFE soft seat T = max. 150 C (+300 F) seat with PTFE insert C vs Packing Body gasket Extensions C vs values See table on page 5 Body material Connections* ANSI sizes: Class Class *Tube fittings, weld ends and other connections on request. 0.01% of rated C vs value, Class IV acc. to DIN IEC higher requirements on request PTFE for temperatures up to +200 C (+392 F) Grafoil for temperatures over +200 C(+392 F) PTFE packing for oxygen service Packing according to German Clean Air Act (TA-Luft) PTFE for temperatures up to +200 C(+392 F) 316Ti/Grafoil and Grafoil for temperatures over +200 C(+392 F) Standard, normalizing fins, bellows seal, cryogenic ½ ¾ 1 X X X X Threaded ISO G ½ or NPT ½, Class

4 Designs with cryogenic extension with bellows seal 4 Standard trim Low noise cage trim Ceramics or tungsten carbide plug tip and seat Trim with PTFE soft seat, T = max. 150 C (300 F)

5 Turbulent? Reynolds entfernen? flowserve.com Standard C vs Values Cvs values (turbulent) Stroke mm (in.) Stem diameter mm (in.) Seat diameter mm (in.) Rangeability* Plug material, standard Seat material, standard Characteristics, lin Characteristics, equal% Tungsten carbide; Hastelloy C; Ceramics Alternative materials for seat/plug Nickel; Monel; Titanium; Alloy X :1 Alloy X - - (0.39) (0.24) (0.08) X X X X :1 Alloy X - - (0.39) (0.24) (0.08) X X X X X X :1 Alloy X X - (0.39) (0.24) (0.08) X X X X X X X X :1 Alloy X X - (0.39) (0.24) (0.08) X X X X * For calibrating conditions - X :1 Alloy (0.39) (0.24) (0.12) (0.12) : (0.39) (0.24) (0.18) (0.28) 50: (0.39) (0.24) (0.39) 5

6 Dimensions mm (in.) Bonnets / extensions Body designs F F B B F A C A Standard Normalising fins Bellows seal Globe valve Angle valve 3-way valve Dimension F Connection Standard Fins Dimensions for valves with cryogenic extensions on request. Dimension A size Bellows PN Bellows PN All valves 45 (1.77) 85 (3.35) 230 (9.0) 305 (12.0) ANSI Flange (RF)* Class 150 Class 300 Class 600 Cl. 900/1500 Class 2500 ½ 178 (7.00) 190 (7.48) 203 (7.99) 216 (8.50) 264 (10.39) ¾ 181 (7.13) 194 (7.64) 206 (8.11) (7.24) 197 (7.76) 210 (8.27) - - Dimension B size ANSI Flange (RF)* Class 150 Class 300 Class 600 Cl. 900/1500 Class 2500 ½ 89 (3.50) 95 (3.74) 102 (4.00) 108 (4.25) 132 (45.20) ¾ 90 (3.54) 97 (3.82) 103 (4.05) (3.62) 98 (3.85) 105 (4.13) - - Dimension C ANSI Flange (RF)* size Class 150 Class 300 Class 600 Cl. 900/1500 Class 2500 ½ 89 (3.50) 95 (3.74) (4.00) 108 (4.25) 132 (5.20) ¾ 90.5 (3.56) 97 (3.82) 103 (4.10) (3.62) 98.5 (3.88) 105 (4.13) * Face-to-face dimensions of valves with other flange facings on request.

7 flowserve.com Weights kg (lb.) series size ANSI Flange Class Standard Fins Bellows Standard Fins ½ 3.3 (7.3) 3.8 (8.4) 4.0 (8.8) 8.0 (17.6) ¾ 3.7 (8.2) 4.8 (10.6) (9,7) 5.5 (12.1) - - ½ 3.5 (7.7) 4.0 (8.8) 4.2 (9.3) 8.2 (18.0) ¾ 3.9 (8.6) 5.0 (11.0) (9.9) 5.7 (12.6) - - ½ 4.4 (9,7) 4.9 (10.8) 5.1 (12.2) 9.1 (20.1) ¼ 4.8 (10.6) 5.9 (13.0) (11.9) 6.6 (13.4) - - ½ 3.9 (8.6) 4.6 (10.1) 5.0 (11.0) 9.0 (19.8) ¾ 4.5 (9.9) 6.2 (13.6) (11.9) 6.9 (15.2) - - ½ 4.1 (9.0) 4.8 (10.6) 5.2 (11.5) 9.2 (20.3) ¾ 4.7 (10.4) 6.4 (14.1) (12.3) 7.1 (15.7) - - Weights for valves with cryogenic extensions on request. Code P Body design Bonnets / extensions Actuator Series 0 Standard Globe valve Normalising fins Angle valve Bellows seal 3-way valve Cryogenic extension H2, H3 Manual handwheel P2, P3 Pneumatic, Series 2 37, 38 Pneumatic, Series 4 E2, E3 Electric 7

8 Worldwide Regional Headquarters Flowserve Corporation Flow Control 1350 N. Mt. Springs Parkway Springville, UT USA Phone: Fax: Flowserve (Austria) GmbH Control s - Villach Operation Kasernengasse Villach Austria Phone: +43 (0) Fax: +43 (0) Your contact: Flowserve India Controls Pvt. Ltd Plot # 4, 1A, E.P.I.P, Whitefield Bangalore Kamataka India Phone: Fax: Kämmer Products Europe, Middle East, Africa, Asia, Pacific FCD KMENBR /08 Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in caonnection with the specific application. While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation. Flowserve Essen GmbH Manderscheidtstr Essen Germany Phone: +49 (0) Fax: +49 (0) Kämmer Products Americas Flowserve (FCD) Kämmer s INC Parkway View Drive Pittsburgh, Pa USA Tel.: Fax: