Page 12 shows the wide range of accessories available to make installation easier. Series VR fans can be supplied with the following variations:
|
|
- Alvin Lamb
- 5 years ago
- Views:
Transcription
1 cat.vreng2013r03- IMP R03 VR V E N T I L A T I O N P R O D U C T S
2 2 General Description The VR series centrifugal fans directly coupled to the electric motor are the result of our experience in the design and construction of fluid-carrying systems. Versatility and reliability are the main characteristics of this series, which is suitable for many areas such as steam intake, drying systems, plastic moulding machines and all applications requiring a small amount of flow with limited pressure. VR Series The housing is in sand-blasted die cast aluminium. The impeller in galvanised plate is the forward curved type. The series is produced in 5 sizes with 108 mm to 180 mm diameter impeller. Available on request with inlet drilling or tapping The fans can have clockwise rotation (RD) or counter clockwise rotation (LG). All of the discharge positions shown on page 12 are possible both using the electrical motor in the B3/B5 form and using a special die-cast base as shown on page 15. In standard execution, the VR fan can convey fluids up to a temperature of 80 C with a relative humidity of less than 80%. When produced in execution (T ), it can convey fluids up to 150 C. Page 12 shows the wide range of accessories available to make installation easier. Electric The electric motors in the VR series are compliant with Unel-Mec standards. They are enclosed with external ventilation and can be flanged (B5), or with feet and flange (B3/B5) upon request. They can be single phase with voltage V 230 / 50 Hz and three-phase with voltage V 230/400 / 50Hz - V 265/460 / 60 Hz. All have IP55 protection and insulating class F. From kw 0.75, IE2 efficiency class. Special voltages in the Eex-d or IE3 efficiency class (NEMA Premium) can also be supplied upon request. Special executions Series VR fans can be supplied with the following variations: - Aisi 304 impeller - all parts in contact with the fluid in Aisi Ral 5009 powder coated housing - Ral painted housing upon request. - Atex group 3, category 2 The performance of the VR fans was measured with outlet ducting according to UNI P fig. 1 and AMCA fig. 7. The impellers are statically and dynamically balanced with electronic equipment according to ISO 1940 grade G=2.5. The selection curves are valid for fluid with a density of 1.2 kg/m3 which is equivalent to air conditions at 20 C at sea level. The sound pressure values LP(A) are expressed in db(a) and are measured in free field at a distance of 1.5 m with a free inlet and ducted discharge. - The information indicated is subject to change without notice -
3 3 Arrangement 5 Standard Execution Execution -T- Arrangement 5S Standard Execution Execution -T-
4 4 VR 92 Impeller Diametro diameter: girante = 108 mm J = 0,01 kg m² Lp(A) Hz60 Giri kw 0,12 0, e Lp(A) VR 134 Hz50 Giri kw 0,09 0, e Impeller Diametro diameter: girante = 133 mm J = 0,015 kg m² Hz50 Giri kw 0,18 0, e Lp(A) Hz60 Giri kw 0,18 0, e Temperature Density Total pressure Temperature Density Total pressure Velocity pressure Volume Outlet velocity Velocity pressure Lp(A) Volume Outlet velocity
5 5 VR 164 Impeller Diametro diameter: girante = 160 mm J = 0,025 kg m² Lp(A) Hz60 Giri kw 0,25 0, e Lp(A) VR 184 Hz50 Giri kw 0,18 0, e Impeller Diametro diameter: girante = 180 mm J = 0,03 kg m² Hz50 Giri kw 0,18 0, e Lp(A) Hz60 Giri kw 0,25 0, e Temperature Density Total pressure Temperature Density Total pressure Velocity pressure Volume Outlet velocity Velocity pressure Lp(A) Volume Outlet velocity
6 6 VR 190 Impeller Diametro diameter: girante = 180 mm J = 0,035 kg m² Hz50 Giri kw 0,37 0, e Lp(A) Density Total pressure Velocity pressure Hz60 Giri kw 0,55 1,1 - - e Temperature Lp(A) Volume Outlet velocity
7 7 Overall dimensions Arrangement 5 Standard Execution Execution -T- Overall dimensions Arrangement 5S Standard Execution Execution -T- VR Mot/Pol. B C D E* F G* I M N P Q R S* T 92 56/ / / / / / / / / / * Maximum size
8 8 Housing dimensions VR A B C D E F G H , , , , , , , , , , ,5
9 9 Inlet flange Outlet flange VR L M N P Q R S T U V Z
10 10 Discharge positions Arrangement 5 with support bracket side view RD 0 LG 0 RD 45 LG 45 RD 90 LG 90 RD 135 LG 135 RD 180 LG 180 RD 225 LG 225 RD 270 LG 270 RD 315 LG 315 *Not applicable at VR 92. Special bracket execution for VR 134.
11 11 Discharge positions Arrangement 5S side view RD 0 LG 0 RD 45 LG 45 RD 90 LG 90 RD 135 LG 135 RD 180 LG 180 RD 225 LG 225 RD 270 LG 270 RD 315 LG 315
12 12 Terminal connection box position Upon request, the terminal connection box on the electric motor can have 4 different positions related to the outlet. If not expressly requested, the fan is supplied with the terminal connection box in the position opposite the outlet (MS0). MS 0 MS 90 MS 180 MS 270
13 13 Accessories 1. Outlet screen 2. Outlet counterflange 3. Smooth outlet spigot 4. Inlet screen 5. Inlet counterflange 6. Smooth inlet spigot 7. Flanged inlet spigot 8. Diaphragm damper 9. Inlet filter 10. Support bracket* *Not applicable at VR 92. Special bracket execution for VR 134.
14 14 Dimensions of accessories 1. Outlet screen 2. Outlet counterflange 3. Smooth outlet spigot 4. Inlet screen 5. Inlet counterflange 6. Smooth inlet spigot 7. Flanged inlet spigot 8. Diaphragm damper 9. Inlet filter 10. Support bracket* *Not applicable at VR 92. Special bracket execution for VR 134. VR A B C D E T U V Z
15 15 15 CBI Group Products Range Axial Fans GAV/GAX m 3 /h Pa EFA m 3 /h Pa AP m 3 /h 100 Pa CBJET m 3 /h 8000 N GAT m 3 /h 600 Pa AXL m 3 /h Pa Centrifugal Fans Ch m 3 /h Pa K m 3 /h Pa ChT m 3 /h Pa SB/MB/XB m 3 /h Pa H m 3 /h Pa Ventilation Products VR m 3 /h Pa VRP m 3 /h Pa APS/APF m 3 /h Pa DT 400 m 3 /h Pa N m 3 /h Pa CBS m 3 /h Pa Light Ventilation ARIES m 3 /h 650 Pa PULSAR m3/h 250 Pa Multistage BCN 600 m 3 /h Pa TBS m 3 /h Pa HG m 3 /h Pa SSM/SSB 650 m 3 /h Pa Heavy Duty Fans Iskenderun Steel Plant Turkey Heidelberg Cement Plant Sweden CMC Steel Plant USA Tokyo Steel Plant Japan Maurice Lemaire Tunnel France Edison Power Plant Italy Unisteel Steel Plant Kuwait
16 CBI Group Industrie CBI (CBI Group Headquarters) Monza plant: Via della Taccona, Monza (MB) ITALY Tel. +39 (039) Fax +39 (039) Cambiago plant: Viale delle Industrie, Cambiago (MI) ITALY Tel. +39 (02) Fax +39 (02) Gissi plant: Zona Industriale, 62/A Gissi (Chieti) ITALY Tel. +39 (0873) Fax +39 (0873) CBI Service Viale delle Industrie, Cambiago (MI) ITALY Tel. +39 (02) Fax +39 (02) CBI Asia Pacific 26 Sin Ming Lane, # Midview City SINGAPORE Tel. +65 (6559) 4634 Fax +65 (6554) 7189 CBI China Shuangkou Industrial Zone Bei chen District Tianjin CHINA Tel. +86 (22) Mob. +86 (138) CBI Russia Pervomaiskaya str. dom 44/20, of Moskova RUSSIA Tel. +7 (499) Mob. +7 (985) CBI France Lyon office: 71, Rue Jean Zay Saint Priest FRANCE Tel (4) Fax + 33 (4) info@cbifrance.com Paris office: 1, Rue Du Roi Canly FRANCE Tel (3) Fax + 33 (3) info@cbifrance.com CBI España Av. Corts Catalanes St. Cugat del Vallés Barcelona ESPAÑA Tel (93) Fax + 34 (93) info@cbiespana.com CBI Deutschland Ratinger Strasse, Düsseldorf GERMANY Tel. +49 (221) Fax +49 (221) info@cbifans.de CBDoctor 3607/3608 GIDC Estate Phase IV- Vatva Ahmedabad (Gujarat) INDIA Tel. +91 (79) Faks +91 (79) marketing@cbdoctor.co.in CBI Türkiye Serifali Mah. Bayraktar Bulv. No: 48 Kat: 1 Ümraniye Istanbul TURKEY Tel. +90 (543) Fax +90 (216) info@cbiturkey.net CBV / De Raedt Parc Industriel du Monceau Allée des Artisans, Esneux (Tilff) BELGIUM Tel (4) Fax + 32 (4) info@cbvfans.com info@deraedt.be TheGroupR00.indd
2 DT Table of Contents
cat.dteng2013r02- IMP R02 DT V E N T I L A T I O N P R O D U C T S 2 DT Table of Contents General Description... 3 Arrangement... 5 Performance curves... 7 DT1 - Overall dimensions... 8 DT1 - Discharge
More informationAXICIAT VA. Axial fans. Smoke extraction F200/120 and F400/120. High available pressure
Smoke extraction F200/120 and F400/120 A complete range from 1250 to 95000 m 3 /s High available pressure Blade with variable pitch on stop APPLICATION Extraction or introduction of non-loaded air in the
More informationVIRTUO. Comfort ventilation boxes Self-supporting casing with lacquered
Comfort ventilation Self-supporting casing with lacquered finish as standard Air intake or exhaust operation Simplified access to internal components ErP READY Air flow: 500 to 35 000 m 3 /h Use ventilation
More informationThe Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries certifies that the KAT series : version S and - model 9-7 to
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationSpecifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).
Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and
More informationCONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
More informationSeries VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h
SOUND-INSULATED KITCHEN FAN Series device. The impeller is mounted on the motor shaft and is balanced statically and dynamically. The motor has F class motor winding insulation and ingress protection rating.
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationCONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7
CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound
More informationV.I.R.T.U.O. Ventilation boxes. Comfort ventilation boxes. Use. Range. Design
Comfort ventilation Very wide flow rate range: 0.11 to 9.72 m 3 /s Standard version with lacquered finish casing Use ventilation are designed for the ventilation of tertiary or industrial buildings, for
More informationCBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
More informationITEC High Efficiency EC Twin Fan for convenient fitting and full control. Casing constructed from 1.6mm Galvanised sheet steel
ITEC High Efficiency EC Twin Fan for convenient fitting and full control Casing constructed from 1.6mm Galvanised sheet steel Circular spigot connection Inline for ease of fitting into duct system Single
More informationPowerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
More informationMAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
More informationAXIAL FANS Catalogue CN0050C01 May 2008
ADTA AXIAL FANS Catalogue CN0050C01 May 2008 ADTA AXIAL FANS Catalogue CN0050C01 May 2008 Construction Specifications Impellers: Breezax aerfoil blades are available in four types of material: Glass Reinforced
More informationCentrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
More informationMedium Pressure Centrifugal Fans
Medium Pressure Centrifugal Fans 2012 Edition ...About Axair Fans UK Application Knowledge: Over 20 years experience in general air movement; including corrosive, explosive and hot fume handling. Stock
More informationUnobox units with backward curved centrifugal impellers
Unobox Fans Unobox units with backward curved centrifugal impellers Type Code UNO 67-450 -4 E W Unobox Box size 50=500mm ; 67=670mm 80=800mm ; 102=1020mm Impeller diameter Number of poles D - Three Phase
More informationNovenco axial flow fans. ZerAx - Standard January 2010
Novenco axial flow fans ZerAx - Standard January 2010 Product facts Product The Novenco ZerAx series of axial flow fans uses innovative design to reduce power consumption by improving efficiency. As an
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationBIFLOW SB CON Product Brochure
BIFLOW SB CON Brochure Available for next day delivery with ELTA SELECT Bifurcated Conical Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationV.I.R.T.U.O. Ventilation boxes. Comfort ventilation boxes
Comfort ventilation Very wide flow rate range : 0.11 to 9.72 m 3 /s Standard version with lacquered finish casing APPLICATION ventilation are designed for the ventilation of tertiary or industrial buildings,
More informationJM Aerofoil Multi-Stage 50 Hz
JM Aerofoil Multi-Stage 5 Hz JM AEROFOIL - MULTI-STAGE CONTENTS Page: JM Aerofoil Multi-Stage - Introduction -5 Multi-Staging Motor Frame Size Schedules - Three Phase 7-8 Performance Curves SK1- SK135
More informationACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans
Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and
More informationBifurcated Case Axial Fans (BIFA)
Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient
More informationCBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
More informationPowerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
More informationLiquid cooled Diesel engines kw
Liquid cooled Diesel engines 8.6-26.0 kw Water cooled Diesel engines 8.6-26.0 kw STANDARD EQUIPMENT External oil filter Exhaust manifold Intake manifold Intake fan Accelerator control Electric starter
More informationSquare Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710.
Square Duct Fans - ESTOC Range Features Sizes from 355 to 71 mm diameter Air flow 1,9 m 3 /h (5.2 m 3 /s) Static pressures up to 115 Pa Maximum temperature from +4 C to +7` C (depending on the model) Adjustable
More informationSection 4. Axial Fans - Section 4
Axial Flow Fans Section 4 Fläkt Woods offers a wide range of axial flow fans for general air movement and special applications such as emergency high temperature smoke extract and pressurisation. ATEX
More informationMegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
More informationExplanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More informationHIGH TEMPERATURE TWIN SQUIF FANS
HIGH TEMPERATURE FANS HIGH TEMPERATURE FOR SMOKE EXTRACT CERTIFIED TO EN12101-3-2002. 374 029 2085 8200 BENEFITS QUIET AND POWERFUL SOLUTIONS High performance centrifugal motor/impeller combination providing
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More informationLPS IN-LINE CENTRIFUGAL ELECTRIC PUMPS. Your Life, our Quality. Worldwide. 118 Heating & Conditioning
In-Line centrifugal electric pumps with stainless steel hydraulic parts AISI 304. APPLICATIONS Civil/industrial heating plants Systems for moving domestic hot water Cooling and air conditioning plants
More informationGV In Line Circular Duct Fan Circular Ducting High/Low Speed Performance
GV In Line Circular Duct Fan Circular Ducting High/Low Speed Performance GENERAL VENTILATOR A quality product suitable for general residential application. proprietary made and compact design fan is designed
More informationHORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS
Horizontal multistage centrifugal electric pumps in AISI 304. stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and
More informationCONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,
RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from
More informationhore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
More informationAC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
More informationHison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
More informationAir cooled Diesel engines kw
Air cooled Diesel engines 2.7-8.8 kw KD15 / 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 models in the power range 2.7 to 8.8 kw. Particularly suited to small agricultur
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationBDB DIDW CENTRIFUGAL FAN with Backward Wheel TYPE X TYPE T
DIDW CENTRIFUGAL FAN with Backward Wheel BDB 0 BDB 0 is DIDW centrifugal fan with high efficiency nonoverloading backward curved impeller. The wheel of BDB 0 is made of cold rolled sheet steel with polyester
More informationHison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
More informationNCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped
More informationDuct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
More informationLowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz
Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6
More informationDUCT-M HT F400/2h. Smoke exhaust ducted axial fan APPLICATIONS TECHNICAL SPECIFICATIONS VERSIONS ACCESSORIES ON REQUEST. May 2018 Catalog N 000 Rev.
DUCT-M HT F/h Smoke exhaust ducted axial fan APPLICATIONS The fans of the DUCT-M HT line have been designed to be employed in all the plants where it is prescribed the necessity to guarantee the smoke
More informationREVOLUTION SLCX Product Brochure
REVOLUTION SLCX Brochure Available for next day delivery with ELTA SELECT ATEX Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
More informationQUBE SQU-HT(S) Product Brochure
QUBE SQU-HT(S) Product Brochure Available for next day delivery with ELTA SELECT Centrifugal Box Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy
More informationTSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.
TSA TSAT CJTSA TSA: Single inlet, belt-driven centrifugal fans with shaft outlet and forward-curved impeller. TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors, a set of pulleys
More informationSquare Duct Fans - ESTOC TARGE Range. Estoc Targe Features. Electrical Supply. Sizes 355, 400, 450, 500, 560 and 630.
Square Duct Fans - ESTOC TARGE Range Features Sizes from 55 to 6 mm diameter Air flow 21, m /h (5.8 m /s) Static pressures up to 145 Pa Maximum temperature up to 11 C Controllable external rotor motors
More informationCM5-5 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686818 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686818/cm5-5-a-r-a-e-avbe.html
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
More informationTCDH F400-TCDV F400. Smoke extract - Fire protection SMOKE EXTRACT FANS CENTRIFUGAL BACKWARD ROOF FANS F Application. Range.
N OU VE A U Approved F400 10 (400 C 10 mn) CE marked Special range for speed variation VAR Easy installation and maintenance Low sound level Electrical accessories and relay box mounted wired New vertical
More informationDVAX-ARS. Roof-mounted unit for mechanical smoke extract
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans DVAX- Roof-mounted unit for mechanical smoke extract 2 DVAX DVAX- Roof-mounted axial fan unit
More informationsupplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
More informationCJBX CJBX/AL. Options. Order code CJBX 15/15 4. Technical characteristics
CJBX CJBX/AL CJBX: Belt-driven acoustically-insulated ventilation units. CJBX/AL: Belt-driven ventilation units with aluminium profiles and prefinished sheet steel and acoustic insulation. CJBX Options
More informationCYLINDRICAL CASED AXIAL FLOW FANS
- Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate
More informationIn-Line Dry Rotor Circulating Pumps. EIL R Series EIL- FK Series
EIL R Series EIL- FK Series ETNA Experience Environment Friendly Engineering Exact Answer to Your Need With our R&D, production and installation experience of more than 3 years in the pump technologies
More informationHDW-200 T5. Generating Rates SERVICE PRP STANDBY. INDUSTRIAL RANGE Soundproof Powered by DOOSAN
E10 WATER-COOLED THREE PHASE 50 HZ STAGE 2 DIESEL Generating Rates SERVICE PRP STANDBY Power kva 200 220 Power kw 160 176 Rated Speed r.p.m. 1.500 Standard Voltage V 400/230 Available Voltages V 230-230/132
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 122 m 3 /h for wall mounting Low pressure axial fans in the steel casing
More informationCabinet Fans & Smoke Spill Cabinet Fans
1 Cabinet s & Smoke Spill Cabinet s Direct Drive Cabinet Single Skin - CD Series Cabinet manufactured in galvanized steel complete with inlet & outlet spigots. Squirrel cage induction motors with sealed
More informationACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationFEATURES & BENEFITS UPON REQUEST
ErP 27 IDUSTRIAL CETRIFUGAL FAS WITH VERY HIGH PRESSURE APPLICATIO High pressure industrial centrifugal fans with backward curved impeller, suitable for exhausting clean or slightly dusty air. They can
More informationIn-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
More informationSeries TDA DIRECT DRIVEN MODEL: TDA- 450/9AA/8-8/ / Construction. Airflow Direction
DIRECT DRIVEN Series TDA Construction Double flanged casing is produced in mild steel or galvanised steel, available in short and long cased. The impeller having manually adjustable pitch blades is made
More informationMMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More informationA Smarter Breed. of Centrifugal Fans
A Smarter Breed of Centrifugal Fans The new range of Blue Rhino backward-curved centrifugal fans can save on-site installation and commissioning time, reduce service costs and provide greater reliability.
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationSmall centrifugal fans made of plastic
Small centrifugal fans made of plastic durable application-optimised wide range of variants 2 Small centrifugal fans made of plastic Index Small centrifugal fans made of plastic HF R 75-16 D and HF R 110-18
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationVent-Axia Sabre Sickle Roof Fans (VSR)
Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,
More informationBSB. SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
BSB SINGE INET ENTRIFUGA FAN with Backward heels BSB Series SINGE INET ENTRIFUGA FAN with Backward heels Kruger Ventilation Industries certifies that the BSB series shown herein is licensed to bear the
More informationF a n t y p e s J K K - J K K
F a n t y p e s J K - 3 K - J K - 7 5 K Section: 2 Page: 1/6 Revised: 1..25 The indirect drive centrifugal fan types JK-3K - JK-75K are designed for material handling. M N Equipped with self-cleaning impellers
More informationMMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
More informationCentrifugal medium-pressure fans fitted with multi-blade
CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in
More informationVORTICENT C E RANGE Centrifugal fans
NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,
More informationDefining Innovation. backward curved FANs
Defining Innovation. high efficiency industrial backward curved FANs TYPE HIB BULLETIN 00-B May 20 HIB High-Efficiency Industrial Backward-Curved Fans Model HIB fans from Twin City Fan & Blower employ
More informationNALSRF BELT DRIVE ACOUSTIC SINGLE EXTERNAL ROOF FANS
NALSRF BELT DRIVE ACOUSTIC SINGLE EXTERNAL ROOF FANS External roof mounted single fan unit manufactured from aluzinc. 7.111 +44 (0) 29 2085 8515 BENEFITS Hard wearing on site External single fan unit manufactured
More informationCentrifugal Fans RZR belt driven. Issue 2.5 EN August 2013
Centrifugal Fans RZR belt driven Issue 2.5 EN August 2013 1 AMCA Nicotra Gebhardt S.p.A. (Italy) certifies that ADH-E fans of the E0, E2, E4, E6 and E7 versions, from sizes 01 to 05, RDH-E fans of the
More informationNEW WINDER. Impellers with higher efficiency and less sound level
NEW Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationCM10-3 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-3 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686946 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686946/cm1-3-a-r-a-e-avbe.html
More informationCVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
More informationPumps Motors ISO 9001 Company
SERIES DATA BOOKLET EndSuction Centrifugal Monoblock Pumps 6 Hz Pumps Motors ISO 91 Company Pumping Solution Contents Endsuction centrifugal monoblock pumps Product data Introduction Applications Features
More informationAND AXIAL FLOW FANS ECOFIT
AND AXIAL FLOW FANS with adjustable blades as standard fans, explosion proof design and smoke fans ECOFIT Rosenberg East Asia Pte Ltd 71 Ubi Crescent #08-04 Excalibur Centre Singapore 408571 Tel: +65 6846
More informationCSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller
CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys
More informationMTB /183 A-F-A-BQQV 400D-2 11kW
GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html
More information