Superstrut. Metal Framing. Fittings and Brackets. Material. Nuts and Bolts Required. Dimensions. Design Load. Finishes and Special Materials

Transcription

1 Material Superstrut fittings and brackets are man u fac tured from hot rolled carbon steel. The following standard dimensions apply to all fittings except as indicated on the individual drawings. Hole spacing Hole spacing Hole size Material Material 3/ in. from end of fittings in. centers 9/ in. diameter in. wide /4 in. thick Application Instructions Parts drawings illustrate a typical use for the fitting, and in many cases other uses for the part are appropriate. Nuts and Bolts Required Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately. The standard bolt for the 9/ in. hole is a / in. hex head cap screw in. long. The in. length may be used with all Series channel. Design Load For more information on design load, see page A57 Engineering Data and Specifications. Finishes and Special finishes are Hot Dipped Galvanized (HDGC) and GoldGalv (no suffix). Fittings are also available in Electrogalvanized (EG) and Stainless Steel 3 (SSC). Contact your Regional Sales Office for availability and minimum quantities. Aluminum channel For Aluminum channel, we suggest fittings in HDG (C) or SS (C). Design Data Load ratings vary depending fittings and brackets are used with, *4 or gauge channel. Ratings are shown for each channel material. (See page A57 for Engineering Data and Specifications). A3

2 AB0 AB0HDGC AB0EG AB0 AB0SSC Wt./C 35 lb. Flat Fittings AB07 AB07HDGC AB07EG AB07 AB07SSC Wt./C 5 lb. X07 X07HDG X07EG X07 X07SS Wt./C 78 lb. X08 X08HDG X08EG X08 X08SSC Wt./C 88 lb. AB9 AB9HDGC AB9EG AB9 AB9SSC Wt./C 53 lb. AB0 AB0HDGC AB0EG AB0 AB0SSC Wt./C 78 lb. AB40 AB40HDG AB40EG AB40 Wt./C 9 lb. AB53 AB53HDGC AB53EG AB53 AB53SSC Wt./C 97 lb. AB4 Cat. No. Bolt Size Wt./ (in.) C lb. AB4-/4* /4 8 AB4-5/* 5/ 8 AB4-3/8* 3/8 8 AB4-/* / 7 AB4* 5/8 5 AB4-3/4* 3/4 4 AB55 AB55HDGC AB55EG AB55 Wt./C 70 lb. C GoldGalv EG SSC AB4 AB4HDGC AB4EG AB4 Wt./C 9 lb. For use with either 3/8 in. or / in. hanger rod. AB57 AB57HDGC AB57EG AB57 Wt./C 05 lb. AB ABHDGC ABEG AB Wt./C 48 lb. AB3 AB3HDGC AB3EG AB3 AB3SS Wt./C 50 lb. AB5 AB5HDGC AB5EG AB5 Wt./C 05 lb. Hole Spacing 3/ in. From End Hole Spacing in. Centers Hole Size 9/ in. Diam. Material in. Width Material /4 in. Thick HDG(C) Hot-Dipped Galvanized EG(C) Electrogalvanized (No suffix) GoldGalv SS(C) Stainless Steel 3 A4

3 90º Fittings AB0 AB0HDGC AB0EG AB0 AB0SSC Wt./C 35 lb. -/4 AB0 AB0HDGC AB0EG AB0 AB0SSC Wt./C 35 lb. AB03 AB03HDGC AB03EG AB03 AB03SSC AB04 AB04HDGC AB04EG AB04 AB04SS -/4 AB05 AB05HDGC AB05EG AB05 AB05SSC Wt./C 78 lb. -7/ AB3 AB3HDGC AB3EG AB3 Wt./C 5 lb. -7/ AB4 AB4HDGC AB4EG AB4 AB4SS Wt./C 5 lb. -7/ AB ABHDGC ABEG ABSSC Wt./C 35 lb. AB5 Cat. No. A (in.) Wt./C lb. AB5-* 3-7/8 AB5-* 5-7/8 84 AB5-3* 7-7/8 07 AB5-4* 9-7/8 30 C EG GoldGalv A AB54R AB54RHDGC AB54REG AB54R Wt./C 05 lb. -7/ AB54L AB54LHDGC AB54LEG AB54L Wt./C 05 lb. -7/ AB0R AB0RHDGC AB0REG AB0R AB0L AB0LHDGC AB0LEG AB0L AB74 AB74HDG AB74EG AB74 Wt./C 70 lb. -/4 AB75 AB75HDGC AB75EG AB75SSC Wt./C 77 lb. 5-3/8 Hole Spacing g 3/ in. From End Hole Spacing g in. Centers Hole Size g 9/ in. Diam. Material g in. Width Material g /4 in. Thick HDG(C) g Hot-Dipped Galvanized EG(C) g Electrogalvanized (No suffix) g GoldGalv SS(C) g Stainless Steel 3 A5

4 90º Fittings AB84R AB84RHDG AB84REG AB84R Wt./C 30 lb. 5-3/8 AB84L AB84LHDG AB84LEG AB84L Wt./C 30 lb. 5-3/8 AB99 AB99HDG AB99EG AB99 Wt./C 40 lb. X0 X0HDG X0EG X0 Wt./C 5 lb. -/ -/ X04 X04HDG X04EG X04 Wt./C -90 lb. X89 3-3/4 X89HDGC X89EG X89 Wt./C 05 lb. 4-5/8 -/ X99 X99HDGC X99EG X99 Wt./C 38 lb. -5/8 -/ -5/ N05 N05HDGC N05EG N05 N05SSC Wt./C 74 lb. 3-7/8 -/ 3-3/4 N9 N9HDG N9EG N9 N9SS Wt./C 7 lb. 5-3/8 NEW! SuperMag Magnetic fittings for Superstrut metal framing Powerful, nickel-plated magnets embedded in the most popular Superstrut steel fittings, including square washers, L-brackets, T-brackets and 90 angle brackets, secure the fitting to the strut during assembly. Acting as a third hand, SuperMag fittings allow the installer to work more efficiently and safely with tools and hardware. Magnetic 90 angle fitting, SilverGalv Magnetic flat bracket, SilverGalv AB0M EG -hole, -7 8 H x L (pkg. qty 50) AB9M EG L-bracket (pkg. qty 5) AB05M EG 4-hole 4-hole, 4-8 H x 3- L (pkg. qty 5) AB0M EG T-bracket (pkg. qty 5) Magnetic square washer SilverGalv AB4M /4 EG For 4 bolt (pkg. qty 00) AB4M 3/8 EG For 3 8 bolt (pkg. qty 00) AB4M / EG For bolt (pkg. qty 00) Note: The magnets are only intended for use as an installer aid, not as a permanent installation method on their own. Magnetic fittings must be bolted in place following the same standard installation procedures as non-magnetic fittings for permanent installation. finish is SilverGalv (EG). Best for use with traditional or spring channel nuts. A

5 Angular Fittings AB5 AB5HDGC AB5EG AB5 AB5SS AB ABHDGC ABSS Wt./C 9 lb. AB7 AB7HDGC AB7EG AB7 AB7SS AB8 AB8HDGC AB8SSC Wt./C 9 lb. Other angles available. Contact your Regional Sales Office. AB3 AB3EG Other angles available. Contact your Regional Sales Office. AB3 AB3EG Other angles available. Contact your Regional Sales Office. AB39 Other angles available. Contact your Regional Sales Office. C EG GoldGalv Cat. No. A (in.) B (in.) Wt./C lb. AB39-* 7-3/ 8-/ 48 AB39-* 3-3/ AB39-3* 9-3/4 5-/ 33 Z Shape Fittings A09 A09HDGC A09EG A09 A09SS Wt./C 55 lb. B09 B09HDG B09EG B09 Wt./C 43 lb. C09 C09 Wt./C 49 lb. For attaching A and AR Series channel. D09 Wt./C 45 lb. For attaching B and BR Series channel. CZ09 For attaching C Series channel. EZ09 EZ09HDGC EZ09EG EZ09 EZ09SS For attaching D Series es channel. For attaching H Series and A back to back. For attaching E Series channel. Hole Spacing 3/ in. From End Hole Spacing in. Centers Hole Size 9/ in. Diam. Material in. Width Material /4 in. Thick HDG(C) Hot-Dipped Galvanized EG(C) Electrogalvanized (No suffix) GoldGalv SS(C) Stainless Steel 3 A7

6 A08 A08HDGC A08EG A08 A08SSC Wt./C 75 lb. U Shape Fittings A3 Inside Joiner Wt./C 40 lb. A0 A0HDGC A0EG A0 A0SSC Wt./C 88 lb. Does not include stud nut or bolts. For A and AR Series channel. A AHDGC AEG A Wt./C 8 lb. For A00 Series. Available only in GoldGalv finish. AN ANHDG ANEG AN Wt./C 8 lb. For attaching A and AR Series channel. A AHDG AEG A ASS Wt./C 3 lb. For attaching A and AR Series double channel, and H Series. B0 B0HDG B0EG B0 B0SS Wt./C 5 lb. C0 C0HDG C0EG C0 Wt./C 77 lb. D0 D0HDG D0EG D0 D0SS Wt./C 7 lb. For attaching B and BR Series. E0 E0HDGC E0EG E0 Wt./C lb. For attaching E Series channel. For attaching C Series channel. AB45 AB45HDG AB45EG AB45 Wt./C 70 lb. For attaching A and AR Series double channel. For attaching D Series channel. AB88 C EG GoldGalv Cat. No. Bolt Size (in.) Wt./C lb. AB88-3/8* 3/8 AB88-/* / 37 AB88-5/8* 5/8 Hole Spacing 3/ in. From End Hole Spacing in. Centers Hole Size 9/ in. Diam. Material in. Width Material /4 in. Thick HDG(C) Hot-Dipped Galvanized EG(C) Electrogalvanized (No suffix) GoldGalv SS(C) Stainless Steel 3 A8

7 Wing Fittings AW04 AW04HDG AW04EG AW04 Wt./C 7 lb. AW4 AW4HDG AW4EG AW4 Wt./C 5 lb. A7 AW7HDG A7EG A7 Wt./C 55 lb. AW05L AW05LHDG AW05LEG AW05L Wt./C 59 lb. AW05R AW05REG AW05R Wt./C 59 lb. AW5L AW5LHDG AW5LEG AW5L Wt./C 98 lb. AW5R AW5RHDG AW5REG AW5R Wt./C 98 lb. 3 7 /8 3 7 /8 AW0 AW0HDGC AW0EG AW0 Wt./C 90 lb. AW4 AW4HDGC AW4EG AW4 Wt./C 47 lb. AW9 AW9HDGC AW9EG AW9 Wt./C 87 lb. AW AWHDG AW Wt./C 3 lb. A8 A8HDG A8EG A8 Wt./C 77 lb. AW8 AW8HDG AW8EG AW8 Wt./C 30 lb. Hole Spacing 3/ in. From End Hole Spacing in. Centers Hole Size 9/ in. Diam. Material in. Width Material /4 in. Thick HDG(C) Hot-Dipped Galvanized EG(C) Electrogalvanized (No suffix) GoldGalv SS(C) Stainless Steel 3 A9

8 S0 Brackets S03 S49 Cat. No. A (in.) B (in.) C (in.) Wt./C lb. S0-* 5 75 S0-9* S0-5* S0-* S0-7* S0-33* S50 Cat. No. A (in.) B (in.) Design Wt./ C lb. S03-8* 8-/ 4-/ 80 S03-4* 4-/ 5-3/8 35 S03-0* 0-/ -/ S03-* -/ 8 75 S03-3* 3-/ S03-38* 38-/ S5 SSC Cat. No. A (in.) B (in.) Design Wt./ C lb. S49-8* 8-/ 8 30 S49-4* 4-/ 9 50 S49-0* 0-/ S49-* -/ -/ 870 S49-3* 3-/ -/ 030 S49-38* 38-/ -/ 30 S5 SSC Cat. No. A (in.) Design Wt./C lb. S50-* S50-8* 8-/ S50-* S50-4* 4-/ S50-8* S50-0* 0-/ S50-4* S50-* -/ May be installed inverted with no change in load ratings. S47 S47HDG S47 S47SS SSC Cat. No. A (in.) Design Wt./ C lb. S5-* S5-4* 4-/ S5-8* S5-0* 0-/ S5-4* S5-* -/ S5-30* S5-3* 3-/ 50 4 S5-3* S5-38* 38-/ Design Moment (channel upright as shown) When Supported By A inch lb. A inch lb. Applies to fitting only, not to the arm. S48 S48HDGC S48 SSC Cat. No. A (in.) Design Wt./ C lb. S5-* S5-8* 8-/ S5-* S5-4* 4-/ S5-8* S5-0* 0-/ S5-4* S5-* -/ When installed in inverted position reduce load rating 40%. Design Moment (channel upright as shown) When Supported By A inch lb. A inch lb. Applies to fitting only, not to the arm. Hole Spacing g 3/ in. From End Hole Spacing g in. Centers Hole Size g 9/ in. Diam. Material g in. Width Material g /4 in. Thick HDG(C) g Hot-Dipped Galvanized EG(C) g Electrogalvanized (No suffix) g GoldGalv SS(C) g Stainless Steel 3 A0

9 Brackets S04 S04HDGC S04 Wt./C 74 lb. A A S05 S05HDGC S05 Wt./C 4 lb. A A S7 S7HDG S7 S7SS Wt./C 4 lb. A A S8 S8HDG S8 Wt./C 95 lb. A A S SHDG S Wt./C 385 lb. A A S SHDG S Wt./C 4 lb. A A A

10 Post Bases AP3 AP3HDGC AP3EG AP3 Wt./C 384 lb. -/ AP35 AP35HDGC AP35EG AP35 Wt./C 400 lb. 3-/4 3 dia. 3/4 dia. AP3SQ AP3SQHDGC AP3SQEG AP3SQSS Wt./C 384 lb. 4 holes 3/4 dia. (9.0) -/ (4.8) (88.9) (5.4) 4-/4 (07.9) 4-/4 (07.9) (5.4) AP35SQ AP35SQHDGC AP35SQEG AP35SQ AP35SQSS Wt./C 400 lb. 4 holes 3/4 dia. (9.0) 3-5/ (84. (5.4) 4-/4 (07.9) (88.9) 4-/4 (07.9) (5.4) AP3FL AP3FLHDG AP3FLEG AP3FL Wt./C 7 lb. 3/4 dia. holes -/ AP35FL AP35FLHDGC AP35FLEG AP35FL Wt./C 30 lb. 3/4 dia. holes 3-3/8 -/ 8 3 -/ 8 3-/8 AN70 EG 3/ Cat. No. A B Wt./C lb. AN70-* -3/8 3 AN70-* 4-3/8 8 5 AN70-3* -3/ AN70-4* 8-3/8 4 AN70-5* 0-3/ A B 3/ TS7 Track Support TS7HDG 7/ dia. holes 3-3/4 Requires 3/8 in. x -/ in. bolt and nut (not included) Design load: 000 lb. Wt./C 04 lb. hole 9/ -/8 TS73 Track Support TS73HDG 7/ dia. holes 3-3/4 For use over channel splice Requires 3/8 in. x -/ in. bolt and nut (not included) Design load: 000 lb. Wt./C 8 lb. hole 9/ -/8 A

11 Special Application TR9 TR94 C78 Pipe Roller (Pair) Can be used for Series A, E and H channels only. finish is Electrogalvanized. Frictionless needle bearings. Design load: 500 lb. Safety factor of 5. Wt./C 59 lb. Can be used for Series A, E and H channels only. finish is Electrogalvanized. Frictionless needle bearings. Design load: 000 lb. Safety factor of 5. Wt./C 0 lb. Adjustable Universal Support Support building services and access equipment on flat roofs and flat surfaces Cast aluminum rollers, steel brackets. Designed for standard saddles. Order separately for each pair of rollers: two / in. x 5/ in. hex head cap screws and two / in. channel nuts. Space to suit O.D. of pipe and wrapping. Design Load: 350 lb. Wt./C : 300 lb. The T&B Adjustable Universal Support (AUS) provides an easy method for supporting pipes, conduit and equipment on flat roofs, below raised floors and even on level ground applications. The AUS reduces installation time compared to other support solutions such as wooden blocks, cement blocks, straps and clips. These labor intensive solutions also increase the danger of roof membrane penetration. The AUS system also allows for tool free adjustment of the pedestal height from to 9 inches with a twist of the wrist. This ensures that the supported objects or pipes are uniformly supported and no high stress supports are carrying a disproportionate load in a single location. Cat. No. Description Qty. AUS4-9 Ajustable Universal Support (Base only) AUS-RISER-KIT A00HS00PG H04-/X0EGC E45-/EGC E47-/EGC E48-/EGC AUS-STRUT-KIT A00HS00PG E4-/X00EGC E45-/EGC E47-/EGC E48-/EGC AUS5PCSS AUS50PCSS AUS00PCSS Riser Kit 4 in. strut in. threaded rod Nut Washer Lock washer Bolt Kit 4 in. strut Bolt Nut Washer Lock washer 4-/ in. stainless steel 3 strap (to restrain -/4 in. pipe) 5 in. strap (to restrain -/ in. pipe) in. strap (to restrain in. pipe) Riser Kit Bolt Kit Straps Pipe Grooves in. Platform Adjustable Height Jackscrew Locking Mechanism Sturdy Jackscrew Base to Distribute Load Flexible PVC Mat to Eliminate Stress Points A3