PO Box 847 Greensburg, PA Phone (724) Fax (724) /0

Transcription

1 PO Box 847 Greensburg, PA Phone (724) Fax (724) All Stainless Steel All In Stock Price List 114 7/01/08 1/1/16 PRICE LIST 118

2 Contents Item...Page Made in USA Piece Pipe Clamps º Angles...19 Beam Clamps, 2100 Series...15 Beam Clamps, 2000 Series...15 Channel Nuts...18 Conduit...4 Conduit Bodies...6,7 Conduit Elbows...5 Conduit Hangers...14 Conduit Nipples...4 Couplings...5 Device Boxes...8 Device Box Covers...9 EYS Sealing Fittings...9 Fender Washers...21 Flat Washers...21 GUA Series Conduit Bodies...10 Ground Rod Clamps...22 Grounding Hubs...11 Grounding Liquidtight Connectors...12 Grounding Locknuts...11 Grounding Rods...22 Hex Head Cap Screws...20 Hex Nuts...20 Hubs...11 Junior Top Beam Clamps...15 Liquidtight Connectors...12 Lock Washers...20 Locknuts...11 One Hole Straps...14 Parallel Clamps...15 Plates...19 Plugs...13 Post Bases...18 Reducing Bushings...13 Right Angle Beam Clamps for Strut...18 Right Angle Clamps...15 Rod Couplings...19 Slotted Machine Screws...20 Spring Nuts...18 Square Washers...19 Strut...18 Threaded Rod...19 Three Piece Couplings...4 Two Hole Straps...14 U-bolts...16,17 U-bolt Plates...16,17 Wedge Anchors Terms & Conditions All orders must be placed through a distributor authorized by Gibson Stainless & Specialty, Inc. PAYMENT TERMS: 2/10, NET 30 MINIMUM ORDER: $50 LIST ORDERS: All orders are subject to acceptance by Gibson Stainless & Specialty, Inc. GUARANTEE: All Gibson Stainless & Specialty, Inc. products are guaranteed to be free of defects in material and workmanship for a period of one year from shipment date. Guarantee shall be for replacement of parts only. No further warranties exist, expressed or implied. FREIGHT POLICY: Conduit: Consult Factory Fittings: $175 LIST UPS Ground or common carrier, within the 48 contiguous states. Combined Conduit and Fittings: Consult Factory RETURN POLICY: Returns may not be made without prior factory approval and issuance of a RGA. Restocking charges will apply.

3 Gibson Stainless & Specialty, Inc. Made in USA Policy Gibson Stainless & Specialty, Inc. is an American company, 100% American owned. From the very beginning, Gibson Stainless has used castings from only American foundries. All of our original products, from beam clamps to right angle clamps to conduit bodies, have always been cast in the USA. Machining, finishing, assembly and packaging are done at Gibson Stainless by Gibson Stainless employees. With the loss of manufacturing jobs in the United States, it has been very difficult at times to find American made component parts such as the small screws that hold the lid onto a conduit body; very difficult but not impossible. Gibson Stainless is now making a concerted effort to produce 100% Made in USA parts; not just the casting, but also all component parts such as nuts and screws. We have made great strides and many of our products are now 100% Made in USA. This new price sheet shows the 100% Made in USA products by Gibson Stainless. It also shows the products which have some foreign component and those that are direct imports. We will continue our efforts to either manufacture or source from domestic manufacturers those smaller component items which, in the past, have been foreign products. Body Please refer to the following key or contact the factory for specific country of origin details: 100% Made in USA Product is manufactured in the United States from American-Made material. Gasket Manufactured in USA Product is manufactured in the United States; however, raw material may or may not be of U.S. origin. May Contain Imported Component Product is manufactured in the United States but may contain a component that is an import. The product s manufacturing costs in the United States are greater than 50% of the cost of all of its components. Cover Screws Please note: any changes in a product s country of origin will be updated immediately on our website 3

4 Conduit Inside Outside Wall Length w/o Weight/ Number Size Threads Diameter Diameter Thickness Coupling Stick (lbs.) Material Price ($) CND in SS * CND in SS * CND100-1 in SS * CND in SS * CND in SS * CND200-2 in SS * CND in SS * CND300-3 in SS * CND400-4 in SS * Inside Outside Wall Length w/o Weight/ Number Size Threads Diameter Diameter Thickness Coupling Stick (lbs.) Material Price ($) CND50-304SS in SS * CND75-304SS in SS * CND SS -1 in SS * CND SS in SS * CND SS in SS * CND SS -2 in SS * CND SS in SS * CND SS -3 in SS * CND SS -4 in SS * *Consult rep. or factory for pricing. Custom lengths available; consult factory. Sold as 10 lengths with coupling Sold as 10 lengths with coupling Conduit Nipple Three Piece Coupling Length Conduit Number Size Close NIP50x in NIP75x in Consult rep. or factory for pricing. NIP100x -1 in Custom lengths available; consult factory. NIP125x in NIP150x in x close nipples are 2 long. NIP200x -2 in N/A* Length Conduit Number Size Close NIP50x -304SS in NIP75x -304SS in Consult rep. or factory for pricing. NIP100x -304SS -1 in Custom lengths available; consult factory. NIP125x -304SS in NIP150x -304SS in x close nipples are 2 long. NIP200x -304SS -2 in N/A* NOTE: Format of full part number is part number x length. Example: NIP75x 2-304SS Weight/ Price/ Number Size 100 (lbs.) Material Each ($) TPC in SS TPC100 1 in SS

5 90º Standard Radius Elbow Weight/ Centerline Number Size Each (lbs.) Offset A Straight End B Radius C Material Price ($) ELB in SS * ELB in SS * ELB100-1 in SS * ELB in SS * ELB in SS * ELB200-2 in SS * ELB in SS * ELB300-3 in SS * ELB400-4 in SS * Weight/ Centerline Number Size Each (lbs.) Offset A Straight End B Radius C Material Price ($) ELB50-304SS in SS * ELB75-304SS in SS * ELB SS -1 in SS * ELB SS in SS * ELB SS in SS * ELB SS -2 in SS * ELB SS in SS * ELB SS -3 in SS * ELB SS -4 in SS * *Consult rep. or factory for pricing. Coupling Weight/ Price/ Number Size 100 (lbs.) Material Each ($) CPL50 1 / 2 in SS CPL75 3 / 4 in SS CPL100 1 in SS CPL / 4 in SS CPL / 2 in SS CPL200 2 in SS CPL / 2 in SS CPL300 3 in SS CPL400 4 in SS Weight/ Price/ Number Size 100 (lbs.) Material Each ($) CPL50-304SS 1 / 2 in SS CPL75-304SS 3 / 4 in SS CPL SS 1 in SS CPL SS 1-1 / 4 in SS CPL SS 1-1 / 2 in SS CPL SS 2 in SS CPL SS 2-1 / 2 in SS CPL SS 3 in SS CPL SS 4 in SS

6 Conduit Bodies LB Conduit Body T Conduit Body Number Size Each (lbs.) Style Material Each ($) 7050LB 1 2 in. 1 Form 8 CF8M/316 SS LB 3 4 in. 2 Form 8 CF8M/316 SS LB 1 in. 3 Form 8 CF8M/316 SS LB in. 5 Form 8 CF8M/316 SS LB in. 5 Form 8 CF8M/316 SS LB 2 in. 9 Form 8 CF8M/316 SS LB 3 in. 18 Form 8 CF8M/316 SS LB 4 in. 28 Form 8 CF8M/316 SS NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. Number Size Each (lbs.) Style Material Each ($) 7050T 1 2 in. 2 Form 8 CF8M/316 SS T 3 4 in. 3 Form 8 CF8M/316 SS T 1 in. 4 Form 8 CF8M/316 SS T in. 5 Form 8 CF8M/316 SS T in. 6 Form 8 CF8M/316 SS T 2 in. 9 Form 8 CF8M/316 SS T 3 in. 19 Form 8 CF8M/316 SS T 4 in. 29 Form 8 CF8M/316 SS NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. TB Conduit Body X Conduit Body NEW PRODUCT Number Size Each (lbs.) Style Material Each ($) 7075TB 3 4 in. 3 Form 8 CF8M/316 SS TB 1 in. 3 Form 8 CF8M/316 SS TB in. 5 Form 8 CF8M/316 SS TB in. 6 Form 8 CF8M/316 SS TB 2 in. 9 Form 8 CF8M/316 SS NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. Number Size Each (lbs.) Style Material Each ($) 7075X 3 4 in. 3 Form 8 CF8M/316 SS X 1 in. 4 Form 8 CF8M/316 SS NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. 6

7 Conduit Bodies C Conduit Body Number Size Each (lbs.) Style Material Each ($) 7050C 1 2 in. 1 Form 8 CF8M/316 SS C 3 4 in. 2 Form 8 CF8M/316 SS C 1 in. 3 Form 8 CF8M/316 SS NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. LR Conduit Body Number Size Each (lbs.) Style Material Each ($) 7075LR 3 4 in. 2 Form 8 CF8M/316 SS LR 1 in. 3 Form 8 CF8M/316 SS NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. LL Conduit Body Number Size Each (lbs.) Style Material Each ($) 7075LL 3 4 in. 2 Form 8 CF8M/316 SS LL 1 in. 3 Form 8 CF8M/316 SS NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. 7

8 Device Boxes FD FDC Number Size Each (lbs.) Material Each($) FD75 3 / 4 in. 3 CF8M/316 SS NOTE: Internal grounding screw, mounting feet standard. FDA Number Size Each (lbs.) Material Each($) FDC75 3 / 4 in. 3 CF8M/316 SS NOTE: Internal grounding screw, mounting feet standard. FDS Number Size Each (lbs.) Material Each($) FDA75 3 / 4 in. 3 CF8M/316 SS NOTE: Internal grounding screw standard. Number Size Each (lbs.) Material Each($) FDS75 3 / 4 in. 3 CF8M/316 SS NOTE: Internal grounding screw standard. FDX FDDX Number Size Each (lbs.) Material Each($) FDX75 3 / 4 in. 4 CF8M/316 SS NOTE: Internal grounding screw standard. 8 Number Size Each (lbs.) Material Each($) FDDX75 3 / 4 in. 5 CF8M/316 SS NOTE: Internal grounding screw, mounting feet standard.

9 Device Box Covers BLANK SWITCH RECEPTACLE DOUBLE-GANG BLANK GIBSON STAINLESS F S F D NOTE: Wet locations when used with gasket and Gibson Stainless device box. NOTE: Dry locations only. NOTE: Dry locations only. NOTE: Wet locations when used with gasket and Gibson Stainless device box. Price/ Number Description Material Each ($) 7000-BF Blank Formed Cover 316 SS BC Blank Cast Cover CF8M/316 SS SF Switch Cover 316 SS RF Receptacle Cover 316 SS BF2 Double-Gang Blank Formed Cover 316 SS BC2 Double-Gang Blank Cast Cover CF8M/316 SS NOTE: Supplied complete with gasket and 316 SS screws. Product may contain imported component. Body 100% Made in USA; screws, gasket may or may not be of U.S. origin. EYS Sealing Fitting Conduit Price/ Number Size Material Each($) EYS in. CF8M/316 SS EYS100 1 in. CF8M/316 SS

10 GUA Series Conduit Bodies GUAC GUAT Number Size Each (lbs.) Material Each($) GUAC in. 4 CF8M/316 SS GUAC100 1 in. 4 CF8M/316 SS NOTE: Supplied complete with a cover and neoprene o-ring. Number Size Each (lbs.) Material Each($) GUAT in. 4 CF8M/316 SS GUAT100 1 in. 5 CF8M/316 SS NOTE: Supplied complete with a cover and neoprene o-ring. GUAX GUAB Number Size Each (lbs.) Material Each($) GUAX in. 4 CF8M/316 SS GUAX100 1 in. 5 CF8M/316 SS NOTE: Supplied complete with a cover and neoprene o-ring. Number Size Each (lbs.) Material Each($) GUAB in. 4 CF8M/316 SS GUAB100 1 in. 4 CF8M/316 SS NOTE: Supplied complete with a cover and neoprene o-ring. GUAL Designed for Hazardous Locations CL I, DIV 1, Groups C, D CL II, DIV 1, Groups E, F, G CL III, NEMA 4X Rated Number Size Each (lbs.) Material Each($) GUAL in. 4 CF8M/316 SS GUAL100 1 in. 4 CF8M/316 SS NOTE: Supplied complete with a cover and neoprene o-ring. 10

11 Hub Number Size 100 (lbs.) Material Each ($) 7050-HUB 1 2 in. 20 CF8M/316 SS HUB 3 4 in. 31 CF8M/316 SS HUB 1 in. 45 CF8M/316 SS HUB in. 71 CF8M (316 SS) HUB in. 85 CF8M (316 SS) HUB 2 in. 112 CF8M (316 SS) HUB in. 190 CF8M (316 SS) HUB 3 in. 331 CF8M (316 SS) HUB 4 in. 453 CF8M (316 SS) Grounding Hub Number Size 100 (lbs.) Material Each ($) 7050-G-HUB 1 2 in. 22 CF8M/316 SS G-HUB 3 4 in. 34 CF8M/316 SS G-HUB 1 in. 49 CF8M/316 SS G-HUB in. 73 CF8M/316 SS G-HUB in. 87 CF8M/316 SS G-HUB 2 in. 114 CF8M/316 SS G-HUB in. 192 CF8M/316 SS G-HUB 3 in. 334 CF8M/316 SS G-HUB 4 in. 459 CF8M/316 SS Locknut Conduit Weight/ Number Size 100 (lbs.) Material Price/100 ($) in SS in SS in SS in. 10 CF8M (316 SS) 1, in. 14 CF8M (316 SS) 1, in. 19 CF8M (316 SS) 1, in. 24 CF8M (316 SS) 4, in. 41 CF8M (316 SS) 5, in. 60 CF8M (316 SS) 7, Grounding Locknut Conduit Weight/ Number Size 100 (lbs.) Material Price/100 ($) 8050-G 1 2 in. 3 CF8M/316 SS 1, G 3 4 in. 7 CF8M/316 SS 1, G 1 in. 8 CF8M/316 SS 1, G in. 13 CF8M/316 SS 2, G in. 16 CF8M/316 SS 2, G 2 in. 21 CF8M/316 SS 2, G in. 26 CF8M/316 SS 4, G 3 in. 45 CF8M/316 SS 6, G 4 in. 67 CF8M/316 SS 8,

12 Liquidtight Connectors Straight Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT in. 25 CF8M/316 SS LT in. 35 CF8M/316 SS LT100 1 in. 51 CF8M/316 SS o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT in. 40 CF8M/316 SS LT in. 55 CF8M/316 SS LT in. 77 CF8M/316 SS o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT in. 45 CF8M/316 SS LT in. 61 CF8M/316 SS LT in. 86 CF8M/316 SS Grounding Liquidtight Connectors Grounding Straight Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-G 1 2 in. 27 CF8M/316 SS LT75-G 3 4 in. 38 CF8M/316 SS LT100-G 1 in. 55 CF8M/316 SS Grounding 45 o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-45-G 1 2 in. 42 CF8M/316 SS LT75-45-G 3 4 in. 58 CF8M/316 SS LT G 1 in. 81 CF8M/316 SS Grounding 90 o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-90-G 1 2 in. 47 CF8M/316 SS LT75-90-G 3 4 in. 64 CF8M/316 SS LT G 1 in. 90 CF8M/316 SS NOTE: All liquidtight connectors contain Type 316 SS inside ferrule. This helps provide extra corrosion resistance on inside of fitting.

13 Hex Head Reducing Bushing Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500RB 1 2 x SS RB 1 2 x SS RB 3 4 x SS RB 3 4 x SS RB 3 4 x SS 1, RB 1 x SS 1, RB 1 x SS 1, RB 1 x SS 1, RB x SS 2, RB x SS 2, RB x SS 2, RB x SS 2, RB x SS 2, RB x SS 2, RB x SS 2, RB 2 x SS 4, RB 2 x SS 4, RB 2 x SS 4, Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500RB 2 x SS 4, RB 2 x SS 4, RB x SS 5, RB x SS 5, RB x SS 6, RB x SS 6, RB x SS 6, RB x SS 6, RB 3 x SS 7, RB 3 x SS 8, RB 3 x SS 8, RB 3 x SS 8, RB 3 x SS 8, RB 4 x SS 10, RB 4 x SS 10, RB 4 x SS 10, RB 4 x SS 10, RB 4 x SS 10, Face Reducing Bushing Import NOTE: Full part number is 7500RB followed by the size. Example: 7500RB x 1 2 Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500FB 3 4 x SS 2, FB 1 x SS 3, FB 1 x SS 3, FB x SS 5, FB x SS 5, FB x SS 5, Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500FB x SS 5, FB 2 x SS 7, FB 2 x SS 7, FB 2 x SS 7, FB 2 x SS 7, FB 2 x SS 7, NOTE: Full part number is 7500FB followed by the size. Example: 7500FB x 1 2 NEW PRODUCT Hex Head Plug Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7038P 3 8 in SS P 1 2 in SS P 3 4 in SS P 1 in SS P in SS 1, P in SS 1, P 2 in SS 3, P in SS 6, P 3 in SS 8, P 4 in SS 12, Socket Plug Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7075SP 3 4 in SS 2, SP 1 in SS 2, Import 13

14 One Hole Strap Pipe / Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) in SS in SS in SS in SS in SS in SS in SS 1, in SS 1, in SS 1, in SS 1, Clamp back spacers available; consult factory. Two Hole Strap Pipe / Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) in SS in SS in SS in SS in SS in SS in SS in SS in SS in SS in SS 1, Conduit Hanger Number Size 100 (lbs.) Material 100 ($) in SS in SS in SS in SS in SS in SS in SS in SS in SS 1, NOTES: sizes are supplied complete with Type 316 SS slotted machine screw and nut , 3 and 4 sizes are supplied complete with Type 316 SS carriage bolt and nut. Product may contain imported component. Body 100% Made in USA; bolt and hex nut may or may not be of U.S. origin. 14

15 Right Angle Clamp Parallel Clamp Pipe/ Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) in. 34 CF8M/316 SS 1, in. 35 CF8M/316 SS 1, in. 43 CF8M/316 SS 1, in. 51 CF8M/316 SS 2, in. 61 CF8M/316 SS 2, in. 96 CF8M/316 SS 3, in. 125 CF8M/316 SS 3, in. 146 CF8M/316 SS 4, in. 166 CF8M/316 SS 4, in. 177 CF8M/316 SS 5, in. 351 CF8M/316 SS 12, NOTE: Design allows for pipe diameter variations; will fit PVC-coated conduit. Product may contain imported component. Saddle 100% Made in USA; hex nuts, raw material for U-bolt may or may not be of U.S. origin. Pipe/ Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) in. 58 CF8M/316 SS 3, in. 60 CF8M/316 SS 3, NOTE: Design allows for pipe diameter variations; will fit PVC-coated conduit. Product may contain imported component. Body 100% Made in USA; hex nut and bolt may or may not be of U.S. origin Series Beam Clamp Load Weight/ Price/ Number Size Rating (lbs.)* 100 (lbs.) Material 100 ($) in CF8M/316 SS 1, in CF8M/316 SS 2, in. 1, CF8M/316 SS 3, *Based on upright installation, as shown from bottom attachment hole. PART #2001 Numbers 2003, 2004: Product may contain imported component. Body 100% Made in USA; bolt may or may not be of U.S. origin Series Beam Clamp Load Weight/ Price/ Number Size Rating (lbs.)* 100 (lbs.) Material 100 ($) in SS 1, in SS 1, *Based on upright installation, as shown from bottom attachment hole. Product may contain imported component. Body 100% Made in USA; bolt may or may not be of U.S. origin. Junior Top Beam Clamp Load Weight/ Price/ Number Size Rating (lbs.) 100 (lbs.) Material 100 ($) JTB in CF8M/316 SS 1, JTB in CF8M/316 SS 1, Product may contain imported component. Body 100% Made in USA; set screw, jam nut may or may not be of U.S. origin. 15

16 U-Bolt Pipe/ Load Weight/ Price/ Number Rigid Conduit Size Rating (lbs.) 100 (lbs.) Material 100 ($) in SS in SS in SS in SS in SS in SS in SS in SS in SS in SS in SS 1, in SS 3, in SS 5, in SS 8, in SS 13, in SS 20, in SS 28, in SS 41, in SS 58, Dimensions (In.) Number A B C Size & Pitch NOTES: Sizes supplied complete with one nut on each leg. Sizes 5-20 supplied complete with two nuts on each leg. Product may contain imported component. U-Bolt manufactured in USA; hex nuts and raw material for U-bolt may or may not be of U.S. origin. U-Bolt Plate 16 Nominal Use w/ Gibson Weight/ Price/ Number Size Number 100 (lbs.) Material 100 ($) UBP / 2 in SS UBP / 4 in SS UBP in SS UBP / 4 in SS UBP / 2 in SS UBP in SS UBP / 2 in SS UBP in SS UBP / 2 in SS UBP in SS UBP in SS 1, UBP in SS 2, UBP in SS 2, UBP in SS 3, UBP in SS 5, UBP in SS 7, UBP in SS 7, UBP in SS 9, UBP in SS 9,804.00

17 U-Bolt (Figure 137 Style) Pipe/ Load Weight/ Price/ Number Rigid Conduit Rating (lbs.) 100 (lbs.) Material 100 ($) in SS in SS in SS in SS in SS in SS in SS 1, in SS 1, in SS 1, in SS 1, NOTE: Sizes are supplied complete with one nut on each leg. Product may contain imported component. U-Bolt manufactured in USA; hex nuts and raw material for U-bolt may or may not be of U.S. origin. Dimensions (In.) Number A B C Size & Pitch U-Bolt Plate (Figure 137 Style) Nominal Use w/ Gibson Weight/ Price/ Number Size Number 100 (lbs.) Material 100 ($) P in SS P in SS P in SS P in SS P in SS P in SS P in SS P in SS P in SS P in SS

18 Strut Number Size Gauge Description Weight/Each (lbs.) Material Price ($) 5000SH-316SS x in. 12 Slotted Holes SS * 5000SH-304SS x in. 12 Slotted Holes SS * *Consult rep. or factory for pricing. Custom lengths available; consult factory. Spring Nut (316 SS with 302 SS Spring) Spring Nut: with spring Weight/ Number Size 100 (lbs.) Price/100 ($) in in in in in in. 13 1, Piece Pipe / Conduit Clamp Sold as 10 lengths Channel Nut: without spring Weight/ Number Size 100 (lbs.) Price/100 ($) in in in in in in Pipe/Rigid Weight/ Number Conduit Size 100 (lbs.) Material Price/100 ($) in SS in SS in SS in SS in SS in SS in SS in SS in SS 1, Pipe/Rigid Weight/ Number Conduit Size 100 (lbs.) Material Price/100 ($) in SS 1, in SS 1, in SS 1, in SS 2, Product may contain imported component. Body 100% Made in USA; hex nut and bolt may or may not be of U.S. origin. NOTES: Sizes 1 / 2-2 supplied complete with 1 / 4 X 1 hex head bolt and nut. Sizes 2-1 / 2-4 supplied complete with 5 / 16 X 1 hex head bolt and nut. Sizes 5-8 supplied complete with 5 / 16 X 1-1 / 4 hex head bolt and nut. Right Angle Beam Clamp Load Weight/ Number Strut Size Rating (lbs.) 100 (lbs.) Material Price/Each ($) x in SS L x in SS Product may contain imported component. Saddle 100% Made in USA; hex nuts and raw material for square U-bolt may or may not be of U.S. origin. Post Bases Standard 45 o Offset Wall Mount Double Standard Narrow Weight/ Price/ Number Description Each (lbs.) Material Each ($) 5990PB1 Standard SS PB2 45º Offset SS PB3 Wall Mount SS PB4 Double SS PB5 Standard Narrow SS

19 Threaded Rod Thread Threads Design Length Weight/ Price/. Number Size Per Inch Load (lbs.) (ft.) Each (lbs.) Material Each ($) / 4 in SS / 8 in SS / 8 in SS / 2 in. 13 1, SS / 2 in. 13 1, SS NOTE: Orders of less than 10 pieces will incur a $10.00 packaging charge. Rod Coupling Thread Threads Design Weight/ Price/ Number Size Per Inch Load (lbs.) 100 (lbs.) Material Each ($) / 4 in SS / 8 in SS / 2 in. 13 1, SS 9.00 Import Square Washer Rod Hole Weight/ Price/ Number Size Diameter 100 (lbs.) Material 100 ($) / 4 1 / 4 in. 11 / 32 in SS / 8 3 / 8 in. 7 / 16 in SS / 2 1 / 2 in. 9 / 16 in SS / 8 5 / 8 in. 11 / 16 in SS / 4 3 / 4 in. 13 / 16 in SS Angles Hole Weight/ Price/ Number Description Diameter 100 (lbs.) Material 100 ($) Hole 9 / 16 in SS 1, Hole 9 / 16 in SS 1, Hole 9 / 16 in SS 1, Plates 3-Hole Flat Angle 4-Hole Flat Angle Cross Plate Tee Plate 4-Hole Splice Plate Hole Weight/ Price/ Number Description Diameter 100 (lbs.) Material 100 ($) Hole Flat Angle 9 / 16 in SS 2, Hole Flat Angle 9 / 16 in SS 2, Cross Plate 9 / 16 in SS 4, Hole Splice Plate 9 / 16 in SS 2, Tee Plate 9 / 16 in SS 2,

20 Hardware Hex Head Cap Screw Diameter x Price/ Number Length (In.) Material 100 ($) x x SS x x SS x x SS x x SS x x SS x x SS x x SS x x SS x x SS x x SS x x SS x x SS Import Diameter x Price/ Number Length (In.) Material 100 ($) x x SS x x SS x x SS x x SS Hex Nut Price/ Number Size Pitch Material 100 ($) in SS / 16 5 / 16 in SS in SS in SS / 8 5 / 8 in SS / 4 3 / 4 in SS / 8 7 / 8 in SS in SS Import Lock Washer Price/ Number Size Material 100 ($) in. 316 SS / 16 5 / 16 in. 316 SS in. 316 SS in. 316 SS / 8 5 / 8 in. 316 SS Import Slotted Machine Screw Diameter x Price/ Number Length (In.) Material 100 ($) 9905M- 1 4 x x SS M- 1 4 x x SS M- 1 4 x x SS M- 1 4 x x SS Import 20

21 Hardware Flat Washer Price/ Number Size Material 100 ($) in. 316 SS / 16 5 / 16 in. 316 SS in. 316 SS in. 316 SS / 8 5 / 8 in. 316 SS Import Fender Washer Price/ Number Size Material 100 ($) 9920F- 1 / 4 x 1 1 / 4 x 1 in. 316 SS F- 1 / 4 x 1-1 / 4 1 / 4 x 1-1 / 4 in. 316 SS F- 3 / 8 x 1 3 / 8 x 1 in. 316 SS F- 3 / 8 x 1-1 / 4 3 / 8 x 1-1 / 4 in. 316 SS F- 1 / 2 x 1-1 / 2 1 / 2 x 1-1 / 2 in. 316 SS Import Wedge Anchor Diameter x Price/ Number Length (In.) Material 100 ($) 9400WA- 1 / 4 x 1-3 / 4 1 / 4 x 1-3 / SS WA- 1 / 4 x 2-1 / 4 1 / 4 x 2-1 / SS WA- 1 / 4 x 3-1 / 4 1 / 4 x 3-1 / SS WA- 3 / 8 x 2-1 / 4 3 / 8 x 2-1 / SS WA- 3 / 8 x 3-3 / 4 3 / 8 x 3-3 / SS WA- 3 / 8 x 5 3 / 8 x SS WA- 1 / 2 x 2-3 / 4 1 / 2 x 2-3 / SS WA- 1 / 2 x 3-3 / 4 1 / 2 x 3-3 / SS WA- 1 / 2 x 5-1 / 2 1 / 2 x 5-1 / SS 1, Import 21

22 Grounding Rod Rod Weight/ Length Number Size Each (lbs.) (ft.) Material Price ($) GR588 5 / 8 in SS * GR / 8 in SS * GR348 3 / 4 in SS * GR / 4 in SS * GR18 1 in SS * GR110 1 in SS * Rod Weight/ Length Number Size Each (lbs.) (ft.) Material Price ($) GR SS 5 / 8 in SS * GR SS 5 / 8 in SS * GR SS 3 / 4 in SS * GR SS 3 / 4 in SS * GR18-304SS 1 in SS * GR SS 1 in SS * *Consult rep. or factory for pricing. NOTE: 304 SS Ground Rods are Ground Rod Clamp Rod Weight/ Number Size 100 (lbs.) Material Price/Each ($) GRC625 5 / 8 in. 13 CF8M/316 SS GRC75 3 / 4 in. 14 CF8M/316 SS GRC100 1 in. 45 CF8M/316 SS Product may contain imported component. Body 100% Made in USA; bolt may or may not be of U.S. origin. 22

23 Notes 23

24 High Strength Fast Delivery Reliability Low Maintenance Cost-Effective Corrosion Resistant Customer Service PO Box 847 Greensburg, PA Phone (724) Fax (724)