Carlon Flexible Raceway Systems. Plenum-Gard Riser-Gard Hal-Free Riser-Gard Flex-Plus Blue TM ENT
|
|
- Francine Shaw
- 6 years ago
- Views:
Transcription
1 Carlon Flexible Raceway Systems Plenum-Gard Riser-Gard Hal-Free Riser-Gard Flex-Plus Blue TM ENT
2 Carlon Innerduct Guide W HERE IS I NNERDUCT BEING USED? I NSIDE THE B UILDING O UTSIDE THE B UILDING Plenum Must be UL Listed Plenum cable must be installed Color: Industry standard=orange Pull tape pre-installed in 1" through 2" Plenum-Gard product numbers: 3/4" CE4X1C 1" CF4X1C 11/4" CG4X1C 11/2" CH4X1C 2" CJ4X1C General Purpose & Riser Must be UL Listed Riser rated cable must be used in riser applications Color: Industry standard=orange HDPE innerduct will not meet code Riser-Gard product numbers: 3/4" DE4X1C 1" DF4X1C 11/4" DG4X1C 11/4" DH4X1C 2" DJ4X1C Pulled into a Conduit True sized duct recommended 1.00" ID or 1.25" ID Corrugated duct for newer conduit runs & shorter distance pulls Solidwall for older conduit runs & longer distance pulls Options Plowed or Trenched SDR sized duct recommended (11/4" or larger) SDR 13 wall thickness for non-rocky soil conditions SDR 11 wall thickness for rocky conditions Color Striping Factory installed pull lines Segmented or paralleled reels Pre-lubricated duct Specifying and installing UL Listed innerducts with the anticipation of future upgrades provides the building owner with a low cost solution for the removal of abandoned cables.
3 Carlon Contents Plenum-Gard Plenum-Gard...2 Standard Stock - Reels...2 Standard Stock - Coils...3 Custom Orders...3 Riser-Gard Riser-Gard...4 Standard Stock - Reels...4 Standard Stock - Coils...5 Carlon is the leading manufacturer of premise raceway systems for cable protection and management. This brochure contains Flexible Raceway Systems and accessories including FLex-Plus Blue ENT, Riser-Gard (flexible raceway for riser and general purpose applications), Hal-Free Riser- Gard, and Plenum-Gard (flexible raceway for plenum applications). Our total system approach covers all desired needs for the protection and management of cabling systems. Carlon also offers a variety of other cable management systems for outside plant and inside premises applications. Consult your Carlon representative for information on our other GARD family of products. Look for the following products from Carlon: Multi-Gard (multi-celled conduit system), Intra-Gard (multi-duct conduit system), PV-Mold (nonmetallic telephone/ utility pole riser system for protecting cable), Bore-Gard (boreable conduit system designed for use with directional boring and pipe piercing technology), Split Duct (split conduit system used to repair existing conduit systems), Surface Raceway (for power and datacom cabling in retrofit applications), and Tel-Gard (pre-lubricated PVC conduits.) Custom Orders...5 Hal-Free Riser-Gard Hal-Free Riser-Gard...6 Custom Orders...6 Flex-Plus Blue ENT Flex-Plus Blue ENT...7 Standard Stock - Reels...7 Standard Stock - Coils...7 Accessories Adapters & Couplings Washers /2" & 4" Mud Boxes with Covers...10 Quick Connect Outlet & Switch Boxes...10 ENT Box with Adapters...11 ENT Box Extenders...11 Round Covers for Octagon Ceiling Boxes...11 Quick Connect Octagon Ceiling Boxes...12 PVC Conduit Cutters...12 Rope...13 Tape...13 Cement
4 Plenum-Gard E Plenum-Gard is a UL Listed nonmetallic corrugated flexible conduit for use in Plenum, Riser and General Purpose applications. Plenum-Gard is manufactured from KYNAR Flex PVDF Resin*, a fluoropolymer compound, which exceeds the requirements of UL Standard Test Method No for plenum optical fiber/communication raceways. Plenum-Gard is supplied with a factory installed 1/4" wide, 900 lb. tensile prelubricated pull tape. Plenum-Gard is listed to the National Electrical Code for Plenum, Riser, and General Purpose optical fiber/telecommunication applications as defined in Article 770 and 800 (cables installed must be of suitable rating for the application.) UL Standard 2024 Value Maximum Flame Propagation 1.50 ft. Peak Optical Smoke Density 0.03 Average Optical Smoke Density 0.01 Max. flame rating: UL 2024 Storage -4 F 158 F Handling -4 F 104 F *Kynar Flex is a registered trademark of Atofina Chemicals, Inc. Standard Stock Reels Min. Reel Reel Wt. per Nom. Nom. Pull Bend Size Reel Reel Wt. 100 ft. Color Part No. I.D. O.D. Tape Radius (F x W) Type Length (lbs.) (lbs.) 3 /4" Orange CE4X Empty 2" 36" x 24" W Orange CE4X1-1000S Empty 2" 36" x 24" W Orange CF4X1C lb. 3" 36" x 24" W " Orange CF4X1C lb. 3" 48" x 30" W Orange CF4X1C lb. 3" 48" x 30" W Orange CF4X1C lb. 3" 65" x 48" W Orange CF4X1-1500S Empty 3" 48" x 30" W Orange CG4X1C lb. 3" 36" x 24" W /4" Orange CG4X1C lb. 3" 48" x 30" W Orange CG4X1C lb. 3" 48" x 48" W Orange CG4X1C lb. 3" 65" x 48" W Orange CG4X1-900S Empty 3" 48" x 30" W /2" 2" Orange CH4X1C lb. 4" 36" x 24" W Orange CH4X1C lb. 4" 48" x 48" W Orange CJ4X1C lb. 4" 36" x 24" W Orange CJ4X1C lb. 4" 48" x 48" W W = Wood 2
5 Plenum-Gard Features: For use in Plenum areas per Articles 770 and /4" through 2" Pull tape pre-installed in 1" through 2" Outside Diameters meet IPS Dimensions UL Listed raceway meeting UL 2024 Footage sequentially marked Custom Orders: Custom Orders are not returnable Custom lengths are available in minimum order quantities of 1000 ft. Custom color runs are available in minimum order quantities of 10,000 ft. Options: Color: Black, Blue, Grey, Green, Red, White and Yellow Two, three, or four way parallel Split Duct Custom print line Standard Stock Coils Min. Coil Wt. per Nom. Nom. Pull Bend Length 100 ft. Color Part No. I.D. O.D. Tape Radius (ft.) (lbs.) 3 /4" 1" Orange CE4X1-350* Empty 2" Orange CE4X1-350S* Empty 2" Orange CF4X1C lb. 3" Orange CF4X1C-250* lb. 3" Orange CF4X1-250S* Empty 3" /4" 1 1 /2" 2" Orange CG4X1C-200* lb. 3" Orange CG4X1-200S* Empty 3" Orange CH4X1C-150* lb. 4" Orange CH4X1-150S* Empty 4" Orange CJ4X1C-100* lb. 4" Orange CJ4X1-100S* Empty 4" * Overnight Shippable Custom Orders How to Build a Part Number Position 1 Product Position 2 Size Position 3 Configuration Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length C = Plenum-Gard E = 3 /4" 4 = Corrugated X = Standard 1 = Orange C = 900 lb. Tape Example F = 1" 2 = Black = Feet G = 1 1 /4" 3 = Gray -1000S = 1000 Feet Split H = 1 1 /2" J = 2" 4 = White 5 = Blue 6 = Green 7 = Yellow 8 = Red 3
6 Riser-Gard E Riser-Gard is a nonmetallic flexible raceway for use in Riser and General Purpose applications. Riser-Gard is UL Listed and is available with tape pre-installed. Riser-Gard complies with the UL 2024 Standard for Riser Applications for optical fiber/ communications raceways. Riser-Gard is listed to the National Electrical Code per Articles 770 and 800 for Riser and General Purpose optical fiber/telecommunication applications. Riser-Gard is suitable for use in vertical runs in a shaft or between floors, as well as areas other than the plenum (cables installed must be of suitable rating for the application.) UL Listed to 2024 Test Method Maximum Value Maximum Flame Propagation UL ft. Maximum Air Temperature at 12 ft. UL F Storage -4 F 158 F Handling -4 F 104 F Standard Stock Reels 3 /4" 1" 1 1 /4" 1 1 /2" 2" Min. Reel Reel Wt. per Nom. Nom. Pull Bend Size Reel Reel Wt. 100 ft. Color Part No. I.D. O.D. Tape Radius (F x W) Type Length (lbs.) (lbs.) Orange DE4X Empty 6" 36" x 24" W Orange DE4X1-1000S Empty 6" 36" x 24" W Orange DF4X1C-500R lb. 6" 48" x 32" W Orange DF4X1C lb. 6" 48" x 32" W Orange DF4X Empty 6" 48" x 32" W Orange DF4X1C lb. 6" 48" x 32" W Orange DF4X1C lb. 6" 48" x 48" W Orange DF4X1C lb. 6" 65" x 46" W Orange DF4X1C lb. 6" 72" x 44" S Orange DF4X1C lb. 6" 84" x 44" S Orange DF4X1-1500S Empty 6" 48" x 30" W Orange DG4X lb. 7" 48" x 30" W Orange DG4X1C lb. 7" 48" x 30" W Orange DG4X1-900S Empty 7" 48" x 30" W Orange DG4X1C-500R lb. 7" 48" x 32" W Orange DG4X1C lb. 7" 48" x 48" W Orange DG4X1C lb. 7" 65" x 48" W Orange DG4X1C lb. 7" 72" x 44" S Orange DH4X1C lb. 8 1 /4" 48" x 48" W Orange DH4X1C lb. 8 1 /4" 84" x 44" S Orange DH4X1-750S Empty 8 1 /4" 48" x 30" W Orange DJ4X1C lb. 9 1 /2" 48" x 48" W Orange DJ4X1C lb. 9 1 /2" 96" x 44" S Orange DJ4X1-500S Empty 9 1 /2" 48" x 30" W W=Wood S=Steel 4
7 Features: For use in Riser and General Purpose areas per Articles 770 and 800 of the NEC. Riser-Gard is also suitable for direct burial. NOTE: UL has not evaluated Riser-Gard for this application. UL Listed Raceway meeting UL 2024 Available in sizes 3/4" through 2" Pull tape can be factory pre-installed in 1" through 2" Outside Diameters meet IPS Dimensions Footage sequentially marked Sizes 3 /4" 1" are acceptable for FT4 applications. Custom Orders: Riser-Gard Custom Orders are not returnable Custom lengths are available in minimum order quantities of 1000 ft. Custom color runs are available in minimum order quantities of 10,000 ft. Options: Color: Black, Blue, Grey, Green, Red, White and Yellow Two, three, or four way parallel Split Duct Custom print line Standard Stock Coils Min. Coil Wt. per Nom. Nom. Pull Bend Length 100 ft. Color Part No. I.D. O.D. Tape Radius (ft.) (lbs.) 3 /4" 1" Orange DE4X1-350* Empty 6" Orange DE4X1-350S* Empty 6" Orange DF4X1-250* Empty 6" Orange DF4X1C-250* lb. 6" Orange DF4X1C lb. 6" Orange DF4X1-250S* Empty 6" Orange DG4X Empty 7" /4" Orange DG4X1C-200* lb. 7" Orange DG4X1C lb. 7" Orange DG4X1-200S* Empty 7" /2" 2" Orange DH4X1C-150* lb. 8 1 /4" Orange DH4X1-150S* Empty 8 1 /4" Orange DJ4X1C-100* lb. 9 1 /2" Orange DJ4X1-100S* Empty 9 1 /2" * Overnight Shippable Custom Orders How to Build a Part Number Position 1 Product Position 2 Size Position 3 Configuration Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length D = Riser-Gard E = 3 /4" 4 = Corrugated X = Standard 1 = Orange C = 900 lb. Tape Example F = 1" 2 = Black = Feet G = 1 1 /4" 3 = Gray -1000S = 1000 Feet Split H = 1 1 /2" J = 2" 4 = White 5 = Blue 6 = Green 7 = Yellow 8 = Red 5
8 Hal-Free Riser-Gard NEW! E Hal-Free Riser-Gard is a halogen free nonmetallic flexible raceway for use in riser and general purpose applications. In the event of a fire, this product will not release halogen elements into the air, which makes it ideal for applications in tunnels, laboratories and high-tech environments. Hal-Free Riser-Gard is in compliance with NEC Articles 770 and 800, and meets all the requirements of UL Custom lengths and split ducts are available upon request. Hal-Free Riser-Gard is available in white only. Features: Free from halogen elements For use in riser and general purpose applications Compliant with NEC Articles 770 and 800 Meets all requirements of UL 2024 Custom lengths available in minimum order quantities of 2000 ft. Available in white only UL Listed Test Method Maximum Value Maximum Flame Propagation UL '6" Maximum Air Temperature UL F Specifications 1" 1 1 /4" 1 1 /2" 2" Wt. per Standard Nom. Nom. 100 ft. Reel Reel I.D. O.D. (lbs.) Length Size " " " " Custom Orders How to Build a Part Number Position 1 Product Position 2 Size Position 3 Configuration Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length H = Hal-Free F = 1" 4 = Corrugated X = Standard 4 = White C = 900 lb. Tape Example Riser-Gard G = 1 1 /4" = Feet H = 1 1 /2" -1000S = 1000 Feet Split J = 2" 6
9 Flex-Plus Blue ENT E73317 Flex-Plus Blue ENT is a nonmetallic flexible raceway for use in walls, floors, and non-plenum ceilings. It s lightweight, hand bendable, and free from sharp edges, which reduces installation time and saves money. Flex-Plus Blue ENT is UL Listed and CSA certified and is recognized by Article 362 of the 2002 NEC. It is also recognized by ICC, BOCA, SBCCI, and ICBO for having a one and two hour fire rated wall assembly and up to a three hour rated floor/ceiling assembly. Features: For use in buildings in accordance with Article 362 of the 2002 NEC 1/2" through 2" sizes Available in three colors: Red, Yellow, and Blue Outside Diameters meet IPS Dimensions Storage -4 F 158 F Handling -4 F 104 F Standard Stock Reels 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" Min. Reel Reel Wt. per Nom. Nom. Pull Bend Size Reel Reel Wt. 100 ft. Color Part No. I.D. O.D. Tape Radius (F x W) Type Length (lbs.) (lbs.) Blue 12005AK Empty 6" 36" x 24" W Yellow 1205AKY Empty 6" 36" x 24" W Red 1205AKR Empty 6" 36" x 24" W Blue 12007AA Empty 6" 36" x 24" W Yellow 1207AAY Empty. 6" 36" x 24" W Red 1207AAR Empty 6" 36" x 24" W Blue Empty 6" 36" x 24" W Yellow 12008Y Empty 6" 36" x 24" W Red 12008R Empty 6" 36" x 24" W Blue Empty 7" 48" x 32" W Blue Empty 8 1 /4" 48" x 32" W Blue Empty 9 1 /2" 48" x 32" W Red 12011R Empty 9 1 /2" 48" x 32" W W=Wood Standard Stock Coils 1 /2" 3 /4" 1" Min. Coil Wt. per Nom. Nom. Pull Bend Length 100 ft. Color Part No. I.D. O.D. Tape Radius (ft.) (lbs.) Blue Empty 6" Yellow 12005Y Empty 6" Red 12005R Empty 6" Blue Empty 6" Yellow 12007Y Empty 6" Red 12007R Empty 6" Blue Empty 6" Yellow 12008Y Empty 6" Red 12008R Empty 6"
10 Accessories Quick Connect Adapters & Couplings For use with Riser-Gard and Flex-Plus Blue ENT Couplings Part. No. Size Quantity Weight (lbs.) A240D 1/2" A240E 3/4" A240F 1" Threaded Adapters Part. No. Size Quantity Weight (lbs.) A243D 1/2" A243E 3/4" A243F 1" Snap-In Adapters LR92248 E86720 Part. No. Size Quantity Weight (lbs.) A253D 1/2" A253E 3/4" A253F 1" Quick Connect Adapters & Couplings For use with Plenum-Gard Couplings Part. No. Size Quantity Weight (lbs.) A340F 1" Threaded Adapters Part. No. Size Quantity Weight (lbs.) A343F 1" Snap-In Adapters LR92248 Except where noted by Part. No. Size Quantity Weight (lbs.) A353F 1"
11 Accessories Schedule 40 Adapters and Couplings For use with Riser-Gard and Flex-Plus Blue ENT Male Terminal Adapters For adapting nonmetallic conduits to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on other. Standard Couplings All socket fittings should be attached Using Carlon solvent cement. Using Carlon fittings with Carlon nonmetallic conduit insures system integrity. Socket type for joining nonmetallic conduit. E32447 Part Ctn. A B Min. Max. C S L Ctn. Wt. No. Size Qty. Typical D OD Typical (lbs.) E943D 1/ /8 5/8 9/ / E943E 3/ /32 3/4 9/ /8 3.5 E943F /8 1 11/ /32 3 E943G 1 1 / /32 1 3/ /16 4 E943H 1 1 / / /16 3/4 2 1 / E943J / /16 3/4 2 1 /8 7 Part Ctn. A B Min. Max. C L Ctn. No. Size Qty. Typical D OD Typical Wt. (lbs.) E940D 1/ /64 11/ /2 4.1 E940E 3/ /16 3/4 1 5 /8 4.4 E940F /8 15/ E940G 1 1 / / /8 3.5 E940H 1 1 / / /8 2 3 /8 3.9 E940J / / / Metallic Adapters and Couplings Universal Aluminum Couplings For use with Plenum-Gard and Riser-Gard Self-threading, which draws each end of the conduit into the center of the coupler. Duct O.D. Ctn. Part. No. Size Range Ctn. Qty. Wt. (lbs.) P75 3/4" P100 1" P /4" P150CPLR 1 1 /2" P200 2" Terminating Connector For use with Plenum-Gard Part Nom. O.D. Ctn. Ctn. No. Size Range Qty. Wt. TC100 1" TC /4" TC /2" TC200 2" Washers Flat Sealing Washer Where a waterproof termination is required into any enclosure (metallic or nonmetallic), install the neoprene washer over the threads of a terminal adapter before inserting into the enclosure. Use a standard locknut or threaded bushing to secure the assembly. Part No. Size Ctn. Qty. Ctn. Wt. (lbs.) E943DW 1/ E943EW 3/ E943FW E943GW 1 1 / E943HW 1 1 / E943JW
12 Accessories 2 1 /2" &4" Mud Boxes and Covers For use with Flex-Plus Blue ENT and Riser-Gard Base Rings Listed for use with ceiling fans up to 35 lbs. and for fixture support up to 50 lbs. A861 Without ground lug CA861G With ground lug Covers Quick Connect Outlet and Switch Boxes For use with Flex-Plus Blue ENT and Riser-Gard Suitable for masonry walls Single Gang 16 cu. in. E42728 A862D 2 1 /2" Deep ( 1 /2" KO s) A862E 2 1 /2" Deep ( 3 /4" KO s) A864D 4" Deep ( 1 /2" KO s) A864E 4" Deep ( 3 /4" KO s) A864F 4" Deep (1" KO s) E42728 A58381D 3 x 2 1 /4 x 3 ( 1 /2" KO s) A58381E 3 x 2 1 /4 x 3 ( 3 /4" KO s) LR Inch Square 20 cu. in. A52151D 4 x 4 x 1 1 /2 ( 1 /2" KO s) A52151E 4 x 4 x 1 1 /2 ( 3 /4" KO s) A521DE 4 x 4 x 1 1 /2 ( 1 /2" & 3 /4" KO s) Inch Square 30.3 cu. in. A52171D 4 x 4 x 2 3 /8 ( 1 /2" KO s) A52171E 4 x 4 x 2 3 /8 ( 3 /4" KO s) A5217DE 4 x 4 x 2 3 /8 ( 1 /2" & 3 /4" KO s)
13 Accessories ENT Box with Adapters For use with Flex-Plus Blue ENT and Riser-Gard 4 Inch Square cu. in. ENT Box with Adapters A5329DE 4 x 4 x1 3 /4 ( 1 /2" & 3 /4" KO s) Box Back Wall Support A540DS For use with 1 /2" Knockout ENT Box Extenders For use with Flex-Plus Blue ENT and Riser-Gard Single Gang Part. No. Rise Cu. in. Quantity Weight (lbs.) A410 1/2" A411 5/8" A412 3/4" A413 1" A /4" Two Gang E42728 E42728 Part. No. Rise Cu. in. Quantity Weight (lbs.) A400 Blank A420 1/2" A421 5/8" A422 3/4" Round Covers for Octagon Ceiling Boxes For use with Flex-Plus Blue ENT and Riser-Gard Round Plaster Rings Suitable for fixture support E42728 Except where noted by Part. No. Rise Cu. in. Quantity Weight (lbs.) A471 1/2" A472 3/4" Round Blank Covers Part. No. Rise Cu. in. Quantity Weight (lbs.) E460R-CAR Blank A470D Blank with 1 /2" KO
14 Accessories Quick Connect 4" Octagon Ceiling Boxes For use with Flex-Plus Blue ENT and Riser-Gard Carlon ceiling boxes and round plaster rings are produced from a special high heat resistant engineered plastic material developed specifically for fixture support. Listed for fixture support up to 50 lbs. Ceiling Box 20.5 cu. in. A615D /8" Deep ( 1 /2" KO s) A615E /8" Deep ( 3 /4" KO s) A615DE /8" Deep ( 1 /2" & 3 /4" KO s) Ceiling Box with J Mount 20.5 cu. in. A615DJ /8" Deep ( 1 /2" KO s) Ceiling Box with L Bracket 20.5 cu. in. E42728 A615DL /8" Deep ( 1 /2" KO s) Ceiling Box with Adjustable Hanger Bar 20.5 cu. in. Adjust from 14 1 /4" to 23 1 /4" A615DH /8" Deep ( 1 /2" KO s) Except where noted by PVC Conduit Cutters Kwikcut Cutter Medium Cutter Large Cutter For fast, smooth field cuts of 1/2" through 1" Flex-Plus Blue ENT, Riser-Gard and Plenum-Gard Part No. Size Ctn. Qty. CC120B 8" 10 Hand held cutter makes fast square, smooth field cuts on conduit from 1/2" through 11/4". Produces burr-free cut with no shavings. Fits into pocket or pouch. Part No. Size Ctn. Qty. CC125 9" 12 For clean cuts of conduit 1/2" through 2". Part No. Size Ctn. Qty. CC /2"
15 Accessories Prelubricated, woven polyester tape made from low friction, high abrasion resistant yarns providing a low coefficient of friction. Tape Tape is printed with sequential footage markings for accurate measurements. Part. No. Size Tensile Strength Reel Lengths TL /2" 1250 lbs. 5,000 ft. TL /2" 1250 lbs. 10,000 ft. TL /8" 1800 lbs. 3,000 ft. TL /8" 1800 lbs. 6,500 ft. TL /8" 1800 lbs. 10,000 ft. Other tapes are available. Consult your sales service location for additional information. Carlon Cement (MSDS sheets available at *Meets ASTM D2564 Standard Grade Clear Solvent Cement with dauber* Part No. Size Ctn. Qty. VC9964 1/2 Pint 10 VC9963 Pint 24 VC9962 Quart 12 VC9961P Gallon 6 Recommended pipe application and sizes Recommended for all grades and types of Carlon PVC conduit, duct, wireway and fittings, except Flex-Plus Blue ENT (Electrical Nonmetallic Tubing.) Up through 6" diameter. Set-up time (Evaporation Rate) F Not recommended F 5-6 minutes F 3-4 minutes F 1-2 minutes Recommended installation temperature 40 to 100 F Lap 73 F 2 hrs. 350 psi 16 hrs. 800 psi 72 hrs. 1,500 psi Viscosity at 75 as manufactured cps All-Weather Quick-Set Clear Solvent Cement with dauber* Part No. Size Ctn. Qty. VC9984 1/2 Pint 10 VC9983 Pint 24 VC9982 Quart 12 VC9981P Gallon 6 Recommended for all grades and types of Carlon PVC conduit, duct, wireway and fittings, except Flex- Plus Blue ENT (Electrical Nonmetallic Tubing.) Up through 6" diameter F F F F 4-5 minutes 3-4 minutes 1-2 minutes 1 /2-1 1 /2 minutes 5 to 100 F 2 hrs. 350 psi 16 hrs. 800 psi 72 hrs. 1,500 psi cps All-Weather ENT Blue Quick-Set Solvent Cement with brush* Part No. Size Ctn. Qty. VC9992 Quart 12 VC9993 Pint 24 ENT cement required for use with ENT Recommended for use with Flex-Plus Blue ENT (Electrical Nonmetallic Tubing), Riser-Gard & PVC Optic-Gard, P&C Flex, and Carlon PVC fittings. Up through 4" diameter F F F F 4-5 minutes 3-4 minutes 1-2 minutes 1 /2-1 1 /2 minutes 4 to 100 F 2 hrs. 350 psi 16 hrs. 800 psi 72 hrs. 1,500 psi cps Low VOC Solvent Cement with dauber* Part No. Size Ctn. Qty. VC9LV4 1/2 Pint 10 VC9LV3 Pint 24 VC9LV2 Quart 12 Recommended for all grades and types of Carlon PVC conduit, duct, wireway and fittings, except Flex- Plus Blue ENT (Electrical Nonmetallic Tubing.) Up through 6" diameter. VOC emission of 490 grams/liter per the Bay and South Coast test method F F F F Not recommended 5-6 minutes 3-4 minutes 1-2 minutes 40 to 100 F 2 hrs. 350 psi 16 hrs. 800 psi 72 hrs. 1,500 psi cps 13
16 In USA, contact: Science Park Drive Cleveland, Ohio CARLON ( ) In Ohio, (216) Fax: (216) TDD/Hearing Impaired Access (216) In Canada, contact: c/o Multimodal Logistics 415 Traders Boulevard East Mississauga, Ontario Canada L4Z 1P2 (905) (888) Fax: (905) (888) F50 10M 5/03 SP Lamson & Sessions 2003
In This Section. Flexible Raceway Systems N-1
tnb09_gm102_n_00_01:tnb09_gm102_n_00_01 10/26/09 12:03 PM Page N-1 In This Section Plenum-Gard...N-2 N-3 Riser-Gard...N-4 N-5 Hal-Free Riser-Gard...N-6 Carlon Duct...N-7 N-8 Micro-Gard Plenum and Riser...N-9
More informationElectrical Non-metallic
Electrical Non-metallic Tubing System Carlon ENT System Electrical Non-Metallic Tubing (ENT) is an electrical raceway that has been used since 1980, when it was added to the National Electrical Code. Electrical
More informationPRODUCT CATALOG. Low-voltage structured cable management and ENT systems
PRODUCT CATALOG Low-voltage structured cable management and ENT systems 2 3 Carlon low-voltage structured cable management system 4 5 Overview 6 9 Low-voltage adjustable brackets 10 15 Recessed dual-voltage
More informationApplications. Innovative Solutions For Wire and Cable Management
Carlon P&C Flex Corrugated Flexible Conduit Carlon P&C Flex Nonmetallic Corrugated Conduit makes power and communication installations faster and easier by providing maximum installation flexibility. The
More informationCarlon ecommerce Capabilities
Carlon ecommerce Capabilities Carlon econnect (www.carloneconnect.com) An on-line order tracking website designed exclusively for Carlon distributor partners. Carlon econnect provides easy, secured access
More informationP&C Flex. Non-Metallic Rigid Conduit, Fittings and Accessories. Corrugated Flexible Conduit. Applications
Carlon P&C Flex Corrugated Flexible Conduit Carlon P&C Flex Non-Metallic Corrugated Conduit makes power and communication installations faster and easier by providing maximum installation flexibility.
More informationinnerduct Innerduct INNERDUCT tidbit
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
More informationINNERDUCT. tidbit. Most common innerduct colors are orange and black. Other options are blue, grey, green, yellow, white, red, and striped.
innerduct Innerduct Innerduct is manufactured from High Density Polyethylene in accordance with the specifications of ASTM F-2160 and/or NEMA TC 7. Other dimensional requirements may be acceptable upon
More informationCable management systems that make installation faster and better.
Carlon Orange Structured Cable Management System Carlon structured cable management system (SCMS) is designed for general purpose low voltage residential wire and cable management. This series of boxes
More informationIn This Section. Structured Cable Management Systems. Carlon Orange Low-Voltage Structured Cable Management Systems J-1
In This Section Carlon Orange Low-Voltage Structured Cable Management Systems Overview...J-2 J-5 Boxes and Brackets...J-6 J-11 Raceway and Fittings...J-12 J-13 Accessories...J-14 J-1 tnb09_gm102_j_02_03:tnb09_gm102_j_02_03
More informationYOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationSiphon Tubes, Poly Pipe, Fittings and PVC Cement
Siphon Tubes, Poly Pipe, Fittings and PVC Cement Siphon Tubes Fittings Poly Pipe PVC Solvent Cements and Primer Siphon Tubes Double Bend Aluminum 75 DBA 60 3/4 x 60 50 16 6.45 322.50 75 DBA 72 3/4 x 72
More informationRigid PVC Conduit Fittings & Accessories. For Use in Above Ground, Underground and Encased Installations
Rigid PVC Conduit Fittings & Accessories For Use in Above Ground, Underground and Encased Installations RIGID PVC CONDUIT FITTINGS AND ACCESSORIES A rigid, non-metallic integrated system of couplings,
More informationConduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
More informationBetaflex flexible conduit solutions
Protect Betaflex flexible conduit solutions The highly regarded Betaflex range includes polypropylene, halogen-free, rail approved and galvanised steel conduit. A matched range of accessories and tooling
More informationTwin Wall Ducting. System s. Cable Protection Systems. Pioneers in PE Pipe Technologies. Systems
2011 Twin Wall Ducting Systems Cable Protection Systems System s Pioneers in PE Pipe Technologies Index Electricity and Power Twin Wall p.4 General Utilities Twin Wall p.8 Motorway Communications Twin
More informationReference:!! PRODUCT STANDARDIZATION BULLETIN!! for HDPE Duct, Conduit & MicroDucts!
Customer Service 800-847-7661 Reference: PRODUCT STANDARDIZATION BULLETIN for HDPE Duct, Conduit & MicroDucts AT&T (issue 4.3.1) QUALITY Customer Service 800-847-7661 COMMITMENT TO QUALITY Dura-Line is
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationManufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
More informationPentahead bolts See note 2. Conduit run as specified. Company facility. Refer to drawing SS8.6-2 or SS8.6-3 STANDARD SERVICE INSTALLATION
PULL BOX F SECONDARY SYSTEM Typical grade Pentahead bolts See note 2 Conduit run as specified Plastic or fiberglass for grass areas or Polymer concrete for light duty areas (see notes 2, 3, & 4) Company
More informationCable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
More informationFiberGuide Fibre Management Systems
FiberGuide Fibre Management Systems Table of Contents Introduction...................................................................... 1 Features and Benefits..............................................................
More informationSwitch & Outlet Boxes Technical Data
Switch & Outlet Boxes Technical Data General Information: A box, with or without a bracket or bar hanger, intended for support of a fixture/luminaire weighing 50 lbs. or less is marked FOR FIXTURE/ LUMINAIRE
More informationThe selection of lengths and fittings in a variety of
Plugmold Systems Steel Plugmold Raceway & Multioutlet Assemblies The selection of lengths and fittings in a variety of finishes provides a versatile solution for many applications. Plugmold sections offer
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationProduct Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
More informationDetailed Specifications & Technical Data
Description: 20 AWG stranded (7x28).038" tinned copper conductors, polyethylene insulation, Beldfoil (100% coverage) plus a tinned copper braid shield (55% coverage), sunlight-resistant PVC jacket. Physical
More informationProduct Specifications PIPE SUPPORT PRODUCTS
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43
More informationAnother NEW and EXCITING solution from Metallics! Tired of searching for the right Air Handling Cable Ties? Here they are!
Metallics! Standard Mounting Hole Low Profile Air Handling Cable Ties (Plenum Rated) [ ] CONTRACTOR APPROVED Ideal Application: Air Handling Spaces, above drop ceilings and below raised flooring Meets
More informationInstallation Instructions: HYPERION R-Lite SYSTEM
Installation Instructions: HYPERION R-Lite SYSTEM READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS WILL VOID YOUR WARRANTY! INSTALLATION TIPS Read
More informationVolition. Fiber Optic Cable. 3Innovation
Volition Fiber Optic Cable Tough enough to take it. Easy to handle. Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm
More informationP&C Duct. Type EB-20. Type EB-35. Type DB-60. Type DB-120. Special CA Type DB-100. DB Sweeps
P&C Duct Type EB-20 Type EB-35 Type DB-60 Type DB-120 Special CA Type DB-100 DB Sweeps 23240 Chagrin Blvd Suite 405 Cleveland, OH 44122 216-464-3400 www.primeconduit.com P&C Duct Prime Conduit P&C (Power
More informationChampion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets.
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Flame Shield and bridge hangers for electrical and mechanical markets. Champion Fiberglass began production of epoxy fiberglass
More informationLow Voltage & Communication Fasteners
Eaton offers a wide variety of B-Line series cable management solutions that are ideal for data centers and light-duty commercial, low voltage telecommunication and network cable organization. Com Dangle
More informationFM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
More informationCaledonian Fire Resistant Optic Fiber Cables
Fire Resistant Optic Cables Fire resistant Central Loose Optic cables Application These cables are characterized by light weight and small diameter, suitable for both aerial and duct installation. They
More informationNEC 2011 Code Changes
NEC 2011 Code Changes Articles 280.21-300.50 CHANGES FROM 2008 TO 2011 CODE ARE IN RED Chapter 2 - Wiring and Protection ARTICLE 280 Surge Arresters, Over 1kV III. Connecting Surge Arresters 280.21 Connection
More informationInterconnect Cable Simplex and Duplex
10.3 Interconnect Cable Simplex and Duplex Tight Buffer & Plenum Rated Patch panels Workstation equipment connections Horizontal distribution in open office environments Interconnect Cables are designed
More informationChampion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Haz Duct and bridge hangers for electrical and mechanical markets.
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, Haz Duct and bridge hangers for electrical and mechanical markets. Champion Fiberglass began production of epoxy fiberglass
More informationFM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
More informationGeneral Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
More informationB Polyethylene Tape. B Splicing Covering. Holster
Splicing Materials B Polyethylene Tape Translucent 8-mil polyethylene tape made from electrical grade base material. Intended for use in restoring the dielectric strength between the core and sheath at
More informationSHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
More informationCommunication & Low Voltage. Communication & Low Voltage
145 Communication & low Voltage Cable Supports cable ties up to 9 /32" wide from flanges 1 /16" to 3 /4" thick. 8" cable tie included. Simply installed with a hammer. BE Series BF Series 78101119970 BE-2-4-CT2
More informationSHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
More informationANAMET Electrical, Inc. Worldwide Leader in Flexible Conduit Technology
ANAMET Electrical, Inc. Worldwide Leader in Flexible Conduit Technology ANACONDA SEALTITE 2018 ANAMET Electrical, Inc. AN ANAMET COMPANY When you say SEALTITE, there is only one: ANACONDA. Type MTC Type
More informationSpring Steel Fasteners
BB15 BB10-3 BB423-208 BB10L BCH32 BCH32X BCH32-F3 KIT BCH32-U-5-8 BCH32-A28 BW2-CT2 BCH32-3S BCH32-F4 BCH32-C2 BCH32-W2 BRS-32A BCH32-SC4 BCH-32-4T-C1 BCH-32-4T-A6 BR-32-4T-U-5-8 BR-32-4T-W2 233 Cooper
More information5. Underground Requirements
Un d e rg ro u n d Re q u ire me n ts Section 5 2016 Electric Service Requirements, 3rd Edition Section 5 Underground Requirements Directory Page 5.1 General 34 5.2 Conduit Requirements 34 5.3 Trench and
More informationWall thickness Class 1 Class 2 Class 3 Class kgf/cm² 9.19 kgf/cm² kgf/cm² kgf/cm² Nominal outside diameter.
PVC-U PRESSURE PIPE SYSTEMS For drinking Water- Omani Standard OS 85/1985 Wall thickness Class 1 Class 2 Class 3 Class 4 6.12 kgf/cm² 9.19 kgf/cm² 12.25 kgf/cm² 15.30 kgf/cm² Nominal outside diameter Tolerance
More informationMA-LINE TOOLS AND ACCESSORIES
INDEX BRUSHES BOILER... 14-4 CLEANING... 14-4 COPPER TUBE... 14-3 NYLON TUBE... 14-3 WHISK CONDENSER FIN... 14-4 BUSHINGS ANTI-SHORT... 14-6 CAULKING GUN... 14-2 CHUCKS MAGNETIC... 14-3 COPPER TUBE EXTENSIONS
More informationUNDERGROUND SERVICES - SECONDARY
UNDERGROUND SERVICES - SECONDARY Contents - Underground Services... U-1 General Requirements for Underground Service...U-2 Names of Parts for Underground Service... U-3 Service Termination in a Service
More informationUNSHIELDED MULTI CONDUCTOR
PLTC 300 VOLT PVC Insulation 105 C, 300 Volts UNSHIELDED MULTI CONDUCTOR For use as instrumentation cable inside or outside in control applications. Suitable for installation in trays, troughs, channels,
More informationE R C. R E R C ; ; W T E C
WTEC and its affiliates is an engineering, manufacturing, procurement and construction company dedicated to the alternative energy market. It designs and produces products to move energy from the generation
More informationMipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
More informationCable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
More informationInstallation Instructions: ACCENT SYSTEM
Installation Instructions: ACCENT SYSTEM READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS WILL VOID YOUR WARRANTY! INSTALLATION TIPS Read this entire
More informationForm 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
More informationOmni Cable is a master distributor of specialty wire and cable selling
Omni Cable is a master distributor of specialty wire and cable selling company our mission is to Be the Best Vendor to our customers, to be the Best Customer to our vendors, and to be the Best Employer
More informationFast and Flexible Protection for Electrical Cables! Shureflex Nylon Liquidtight Conduit System
Fast and Flexible Protection for Electrical Cables! Shureflex Nylon Liquidtight System Shureflex Nylon Liquidtight System Quick and Secure One- Piece Fitting Installation with No Tools Required! The best
More informationFlexible Conduit & Fitting (US) - UL Standard Applicable - Kaiphone Technology Co., Ltd.
Flexible Conduit & Fitting (US) - UL Standard Applicable - Kaiphone Technology Co., Ltd. Flexible Conduit & Fitting-US New Brand with Mature Technics Company Profile Chairman Mr. Amigo Hsu General Manager
More informationAMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
More informationCall GUS! FTTx G I O R G E U N D E R G N D O U. Order Online Today!
FTTx Fiber Optic Cable HDPE HDPE Roll Pipe, Couplings, Split Couplings, and Duct Plugs Handholes Pedestals PVC and Duct Banks Fiberglass Duct Bridge Hangers Trenchless Raceway Steel Conduit Multi-Cell
More informationfiber optic cable Outdoor Cables
fiber optic cable Outdoor Outdoor Cables CST Armored cables for direct-buried applications Product specifications Outdoor Cables OC 1 CST & FRP Armor Applications Ideal for installation where direct-burial
More informationLiquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
More informationPipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
More informationHITRONIC HQN Single-mode & Multi-mode Glass Optical Fiber Cable for Outdoor Applications
HQN Single-mode & Multi-mode Glass Optical Fiber Cable for Outdoor Applications HQN is an outdoor glass fiber optic cable available with up to 24 fibers. The cable design includes a loose central tube,
More informationCommercial Pressure and Float Switches for Power Circuits Catalog 9034CT9701R01/11 Class 9013, 9036, 9037, 9038
Commercial Pressure and Float Switches for Power Circuits Catalog 9034CT9701R01/11 Class 9013, 9036, 9037, 9038 TM Table of Contents Table of Contents SELECTION GUIDE PUMPTROL COMMERCIAL PRESSURE SWITCHES...
More informationCable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
More informationELECTRICAL SOLUTIONS
Dome-Top Barb Ty Clamp Ties Nylon 6.6 Ties For indoor use Used to secure a cable bundle to another surface such as a control panel, communication rack, wall or ceiling Design allows for bundling before
More informationSuper Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
More informationSection 4 ASTM Ecoflex Thermal Single Submittal Information Revision H: Dec. 20, 2010 Project Information Job Name: Location: Engineer: Contractor: Manufacturer s Representative: Technical Data Part No.
More informationBetter By Design. Pull Tape Guide
Better By Design Pull Tape Guide Bull-Knot Joining Procedure The following joining procedures for Bull-Line Pull Tape were developed for tying two lengths of Bull- Line together or tying one length of
More informationTube Axial Fan Page Specifications & Dimension Data Performance Data
Tube Axial Fan Page Introduction........................................... 2 Construction Features................................... 3 Information........................................... 4 Specifications
More informationEasier! Faster! Safer!
Gexol CIR Crush and Impact Resistant Without External Armoring Passes the same stringent crush and impact testing required by UL 2225 for Type MC-HL Index CIR Power Cables Three & Four Conductor + Ground...
More informationMax. Operating Pressure. Inside Diameter. ft m in mm psi bar in mm
4, PSI HOSES Product Description. General purpose hoses are used to distribute high pressure water throughout the system.. Safety whips are six foot hoses that are connected between a waterblast control
More informationVACUUM CUPS 2 SECTION 2 VACUUM CUPS 2: EDCO USA.
VACUUM S SECTION VACUUM S 01 EDCO USA. www.edcousa.net :1 VACUUM S CONTENTS BELLOWS S (B) DOUBLE BELLOWS S (B) BELLOWS TRACTION FOOT S (BF) MULTI-BELLOWS S (BL) DEEP S (D) FLAT S (F) FLAT CONCAVE S (FC)
More informationChampion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, strut and bridge hangers for electrical and mechanical markets.
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, strut and bridge hangers for electrical and mechanical markets. Champion Fiberglass, began production of epoxy fiberglass conduit
More informationPRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings
Electrical Metallic Tubing Fittings MC & C Cable & Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable Fittings Liquid-Tight Conduit Fittings Rigid & Intermediate Metallic Conduit Fittings Service
More informationSPLIT-SYSTEM EVAPORATOR BLOWER DESCRIPTION ACCESSORIES EER 8.5 ARI RATINGS* K2ES120A25 10 NOMINAL TONS WITH TWO 5 TON CIRCUITS
550.13-TG11Y (0500) SPLIT-SYSTEM EVAPORATOR BLOWER K2ES120A25 10 NOMINAL TONS WITH TWO 5 TON CIRCUITS EER 8.5 DESCRIPTION This completely assembled dual circuit evaporator blower includes a well-insulated
More informationFlame-retardant PVC offers the protection you need.
Solid wall wiring duct Flame-retardant PVC offers the protection you need. Solid wall duct PVC Engineered to restrict wire access Constructed of flame-retardant PVC Improved flush sidewall and cover style
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationSection One. Steel Underground. PVC Accessories Bolt-on Dresser Fittings Solvent PVC Pipe Fittings Gasketed PVC Pipe Fittings
Page Steel Underground Section One Powder Coated Steel Fittings Galvanized Steel Fittings PVC Fittings Riser Valves Clampon Saddles, Couplers, Male Ends Repair Couplers PVC Accessories Bolton Dresser Fittings
More informationMore space for efficient electrical panel building
More space for efficient electrical panel building Cable management solutions made by HellermannTyton Speed up your projects. With our cable management solutions. Development and production expertise Time
More informationELECTRICAL CONDUIT. EMT IMC Rigid Aluminum
ELECTRICAL CONDUIT EMT IMC Rigid Aluminum QUALITY CONDUIT. FRIENDLY SERVICE. FAST DELIVERY. We know you have a lot of options for electrical conduit. That s why we work hard to be your first choice. Why
More informationTechnical Data Sheet Unshielded (YY) PVC Control Cable
MachineTuff Cables Applications Designed for applications which are installed in occasional flexing and fixed locations. Cable applications include precision control sensors, multi axis control machines,
More informationD9-3. No. WIRING DIAGRAM CONNECTIONS FOR UNDERGROUND SELF CONTAINED METERS JRH JED krich95 LINE LINE ABCN SOURCE SOURCE GROUND GROUND STUD STUD SOURCE
SOURCE 20V 240V STUD (PER NEC) A customer supplied and installed teaser wire is required from the neutral lug to a 5th terminal mounted on the left side of the meter block between the line and load terminals.
More informationTable of contents. 1. Overview Product ordering and information Appendix Wiring duct styles 4. 1.
Ty-Duct Wiring Duct 1 Table of contents 1. Overview 2 1.1 Wiring duct styles 4 1.2 How to order 5 2. Product ordering and information 7 2.1 Solid wall wiring duct 8 2.2 Wide slot wiring duct 10 2.3 Narrow
More informationTC-RHH/RHW-2 USE-2 Copper
TC-RHH/RHW-2 USE-2 Copper XLPE Insulated, PVC Jacketed, ER; 600 V Features Standards UL Listed as TC-ER - exposed run tray cable. Jacket is rated Sunlight Resistance, Oil Resistance I and Direct Burial.
More informationfor over 55 years Distribution and Representative Partners
electrical conduit for over 55 years The Liquatite Line The Liquatite line includes nearly 40 types of flexible electrical conduit for contractors, OEMs, industrial maintenance and repair (MRO), government,
More information4 Installation Guidelines
4 Installation Guidelines 4.1 Code Reference The authority having jurisdiction should be referenced to determine what law, ordinance or code shall apply in the use of flexible duct. 4.3 Installation and
More informationÖLFLEX VFD 2XL - screened VFD cable for fixed installation or occasional flexing with UL TC-ER.
Multi-listed, flexible VFD cable - screened VFD cable for fixed installation or occasional flexing with UL TC-ER. Info VFD drive and motor connections Wide application range (NFPA 70/NEC)/ compliance with
More informationIdeal for surface mounting
One-Piece Surface Steel Raceway V500 /V700 /700H Steel Raceway Ideal for surface mounting small amounts of electrical wiring or communication cables. These rugged raceways offer a low profile appearance
More informationUL Listed TP408. KNOCKOUTS Cat. # Bracket Description Sides Bottom Unit Qty. Wt. Lbs. Per 100 TP408 Drawn 12 1 /2" 5 1 /2" 50 61
4" SQUARE OUTLET BOXES AND COVERS Features: Applications: For use with conduit Can be ceiling mounted to be used as a junction box or to mount lighting fixtures Available in red for fire alarm applications
More informationForm 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationUnitedPolySystems.com
HIGH DENSITY POLYETHYLENE PIPE from ¾ to 16 in both IPS (iron pipe size) and DIPS (ductile iron pipe size) UnitedPolySystems.com Conduit Material Specifications Applications include: Telecom, Energy, DOT,
More informationCOMPACT BUSWAY 40 & 60 AMP HOUSING
40 & 60 AMP HOUSING B40 & HOUSING Each Track Busway housing section consists of an extruded aluminum housing with an insulated strip containing copper conductors mounted on the top interior wall. The aluminum
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationMICRODUCTS FUTUREPATH
FUTUREPATH FEATURES s factory bundled with a polyethylene oversheath: Configurations: 7-way, 4-way, 3-way or 2-way Cost-Effective multiple pathways for one installation cost Ships on a Standard Reel FuturePath
More informationPVC Electrical Fittings & Accessories
PVC Electrical Fittings & Accessories August 2008 Did You Know? CANTEX CAN SUPPLY YOUR FULL LINE OF PVC ELECTRICAL NEEDS 301 Commerce Ste. 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 www.cantexinc.com
More informationGexol. Gexol. World Class Oil & Gas Cables. The Global Cable Solutions Company
Gexol Gexol World Class World Class Mission-critical designed for safe, reliable performance in extremely hazardous operating environments Power Control Instrumentation VFD MMV Assembly Solutions The Global
More information