Electrical Non-metallic

Transcription

1 Electrical Non-metallic Tubing System

2 Carlon ENT System Electrical Non-Metallic Tubing (ENT) is an electrical raceway that has been used since 1980, when it was added to the National Electrical Code. Electrical Non-Metallic Tubing is a pliable raceway that is used in concealed dry locations; concrete slabs; in walls and ceilings; raised floors for information technology equipment; and in buildings exceeding three floors from grade. Features: UL listed Lightweight Non-conductive Color coded Hand bendable (pliable), no sharp edges Available in long-length coils and reels to reduce scrap At T&B, we re committed to: Convenience of single-order, singleshipment to your site for thousands of stocking items Expert local point of contact for clear, consistent information regarding training, codes and standards Quality brands that have proven themselves over time Inventive design and manufacture of problem-solving products Offering a best-of-class warranty and returns policy Available in 1 2" (16) through 2" (53) sizes Available with a complete line of fittings and accessories that are compatible with Rigid Non-Metallic (PVC) Conduit and fittings Easy to work with no special tools required Speeds installation time Uniform carton labeling with additional bar-coding for convenient inventory management Nationwide network of stocking electrical distributors Outstanding customer service capability Supplying you with the right products, convenient packaging, on-time delivery and competitive pricing Retail Hospitality Office We deliver the solutions that make your job easier and offer the power to bring it all together in one package. Call us today and let us help you profit from sourcing your electrical products from the leader, Thomas & Betts. NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. Data Centers

3 Customer Service Immediate, Knowledgeable Assistance Every Thomas & Betts Customer Service Representative is right where the action is surrounded by all the support and information they need to answer your questions and fill your orders faster than ever. Your calls and faxes are automatically routed to Customer Service Specialists who personally serve your account and can answer questions about products, order status, price and availability, and other service-related inquiries. Phone: Fax: T&B Access tnbaccess.tnb.com Contents T&B Services Electrical Non-Metallic Tubing... 4 Boxes and Accessories Flexible Raceway Systems Flexible Raceway System Accessories Technical Information Catalog Number Index T&B Access is a global sales tool for our distributor partners, offering: Quote Requests Stock Checks Pricing Inquiries Cross Reference Order Entry Order Resolution Shipping Status Document Look-Up Automatic Order Receiving Item History Search Multiple-Location User Search Context- Sensitive Help Shipping Confirmations Tracking Data Expediting Returns Processing Quality Issues Customer Report Cards Web Catalog Look-Up All of these tools and more are available online 24 hours a day 7 days a week, without having to make a single phone call. Multi-lingual options are available in English, French and Spanish. T&B Access now serves over 10,000 satisfied customer users at over 3,500 locations every month.

4 T&B Services Over 170 Years of Industry Experience Meeting and exceeding our customers expectations is a fundamental goal of Thomas & Betts. Call our Department and talk LIVE to an expert who ll answer questions and concerns regarding all aspects of our products and services. Our experienced and knowledgeable staff is second to none in the industry! Tool Services TOOL Quality You Can Trust Trust T&B s dedicated Tool Services Department to answer all questions regarding tool applications, repair, warranties, sales/lease/rental and technical information. Ask about our specialized services, including customer/sales training, demos and calibration/certification of tools. Web Catalog /webcatalog Thousands of Products at Your Fingertips U.S. contractors and specifiers have made our web catalog their number one stop. Users can search for technical information by catalog number, UPC code, competitor number, keyword search, product category and/or brand. Having found the item(s) they are searching for, they can then use our Where To Buy function to locate a T&B local distributor and/or other support services. 2

5 T&B Services Web CAD Library /CADLibrary Over 4,000 2D and 3D CAD Models Available FREE! The T&B CAD Library is an on-line source of 2D and 3D CAD models, available FREE to customers who register. Users can download these files to their desktops for import into their working drawings. Drawings are offered in 90 of the most popular native file formats. This is a valuable tool for CAD designers, OEMs and engineering firms, as it will allow them to quickly locate and download T&B drawings into their projects. Over 4,000 drawings of T&B Fittings, PMA Cable Protection, Kindorf, Red Dot and Superstrut products and Steel City and Carlon Floor Boxes are currently available, and we re continually adding more products to the library. BIM Library Now available to you through Autodesk Seek (seek.autodesk.com), our BIM (Building Information Modeling) objects can easily be imported to your Revit models. These BIM objects are fully standards compliant, Revit Certified and completely configurable. Autodesk and Revit are registered trademarks of Autodesk, Inc. 3

6 4Carlon Electrical Non-Metallic Tubing (ENT) System Electrical Non-Metallic Tubing Flex-Plus ENT Flex-Plus ENT is a non-metallic flexible raceway for use in walls, floors and non-plenum ceilings. It s lightweight, hand-bendable and free from sharp edges, which reduces installation time and saves money. Standard Stock Reels CAT. NO. SIZE (in.) COLOR Options: Sizes 1 2" through 2" Colors can designate different voltages. Examples: Yellow color for communication circuits and signaling cable Red color for fire alarm circuits Blue color for power circuits Packaging: coils or reels NOM. I.D. (in.) NOM. O.D. (in.) PILL TAPE MIN. BEND RADIUS (in.) REEL SIZE (in.) (F x W) REEL TYPE (W=WOOD) REEL LENGTH REEL WT. (LBS.) 12005AK Blue Empty 6 36 x 24 W AKY Yellow Empty 6 36 x 24 W AKR Red Empty 6 36 x 24 W AKC Blue Empty 6 36 x 24 W AA Blue Empty 6 36 x 24 W AAY Yellow Empty 6 36 x 24 W AAR Red Empty 6 36 x 24 W AAC Blue Empty 6 36 x 24 W Blue Empty 6 36 x 24 W Y Yellow Empty 6 36 x 24 W R Red Empty 6 36 x 24 W C Blue Empty 6 36 x 24 W Blue Empty 7 48 x 32 W Blue Empty x 32 W Y Yellow Empty x 32 W Blue Empty x 32 W R Red Empty x 32 W Y Yellow Empty x 32 W * 1 1 4" 2" available in yellow & red, made to order; consult factory. Canada Only Standard Stock Coils CAT. NO. SIZE (in.) COLOR NOM. I.D. (in.) NOM. O.D. (in.) PILL TAPE MIN. BEND RADIUS (in.) Coil Length (Ft.) Blue Empty Y Yellow Empty R Red Empty C Blue Empty Blue Empty Y Yellow Empty R Red Empty C Blue Empty Blue Empty Y Yellow Empty R Red Empty C Blue Empty Canada Only 10-ft. Lengths CAT. NO. SIZE (in.) COLOR NOM. I.D. (in.) NOM. O.D. (in.) STD. CTN. STD. Wt UPC 1 2 Blue ft UPC 3 4 Blue ft Blue ft WT. PER 100 FT. (LBS.) E73317 LR83580 FT-4 Rated where noted by WT. PER 100 FT. (LBS.) Note: The solid blue color of ENT conduit is a registered trademark of Carlon. ENT may show color deterioration in direct sunlight when stored outdoors over an extended period of time. It is suggested that all ENT products not be stored outside. Section (8) of the NEC prohibits ENT to be used in areas exposed to direct sunlight. NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc.

7 Boxes and Accessories Stub Downs Vertical Stub Down Carlon Vertical Stub Downs are designed to provide a quick, easy connection to a wood deck or transition from slab-to-slab using Carlon s Quick Connect snap-in design simply snap the ENT in place. The integral snaps provide a secure mount preventing the ENT from pulling out while enabling easy removal of the fitting once the deck is removed. All in a concrete-tight application. The underside of this fitting provides ample room to attach a Carlon coupling to the ENT to continue the run. Carlon Vertical Stub Downs are manufactured out of a highly engineered thermoplastic material to provide extra strength and durability and are available in sizes 1 2", 3 4" and 1". 45 Stub Down Carlon 45 Stub Downs are designed to provide a smooth transition from crossdeck ENT runs to vertical applications. The integral snaps provide a secure mount preventing the ENT from slipping or pulling out but also enable the stub to easily be removed. The underside of this fitting provides ample room to attach a Carlon coupling to the ENT to continue the run. Carlon 45 Stub Downs are manufactured out of a highly engineered thermoplastic material to provide extra strength and durability. They re concrete tight and available in sizes 1 2", 3 4" and 1". CAT. No. CAT. No. Size Size Std. Ctn. Std. Ctn. Std. Wt. A210D A210E A210F Vertical Stub Down Transition Adapter Carlon Non-Metallic Exclusive Carlon Vertical Stub Down Transition Adapters, like our Vertical Stub Downs, provide a means to transition from ENT to another wire-management product where code requires other wire-management means. The integral snaps provide a secure mount preventing the ENT from slipping or pulling out, while the deck-mount flange has a threaded port, enabling connection to other conduit system using a terminal adapter. Carlon Vertical Stub Down Transition Adapters are manufactured out of polycarbonate material to provide extra strength and durability. They re concrete tight and available in sizes 1 2", 3 4" and 1". E86720 Std. Wt. A200D 1 2" Female ENT to NPSC (Female) A200E 3 4" Female ENT to NPSC (Female) A200F 1" Female ENT to NPSC (Female) CAT. No. CAT. No. Size Size Std. Ctn. Std. Ctn. Std. Wt. A220D A220E A220F A220G A220H A220J Stub Down Transition Adapter Carlon Non-Metallic Exclusive Carlon 90 Stub Downs are designed to provide a smooth transition from cross-deck ENT runs to vertical applications where code requires other wire-management means. The integral snaps provide a secure mount preventing the ENT from slipping or pulling out, while the deck-mount flange has a threaded port, enabling connection to any conduit system using a terminal adapter. Carlon 90 Stub Downs are manufactured out of polycarbonate material to provide extra strength and durability. They re concrete tight and available in sizes 1 2", 3 4" and 1". E86720 Std. Wt. A230D 1 2" Female ENT to NPSC (Female) A230E 3 4" Female ENT to NPSC (Female) A230F 1" Female ENT to NPSC (Female) Carlon Electrical Non-Metallic Tubing (ENT) System

8 Boxes and Accessories 6Carlon Electrical Non-Metallic Tubing (ENT) System Mud Box Assemblies Carlon Mud Box Assemblies are available in five unique styles blank, ceiling ring, one-gang, twogang and 4-inch square. All Mud Box Assemblies are manufactured out of polycarbonate material to provide extra strength and durability, are concrete tight and have twelve integral connectors two 1", six 3 4" and four 1 2". Using our new ENT Reducers, this product will meet ANY jobsite application. Mud Box Base with Blank Cover Cat. No. Size Std. Ctn. Std. Wt. A863BC Mud Box with Ceiling Ring Threaded brass inserts for fan (#10-32 screws) and fixture (#8-32 screws) mountings Cat. No. Size Std. Ctn. Std. Wt. A863CF Mud Box with Blank Cover A863CFG Mud Box with Ceiling Ring & Ground Lug Mud Box with One-Gang Ring Cat. No. Size Std. Ctn. Std. Wt. A863S Mud Box with One-Gang Ring A863SG Mud Box with One-Gang Ring & Ground Lug Mud Box with Blank Cover Cat. No. Size Std. Ctn. Std. Wt. A863-4SQ Listed for fixture support up to 50 lbs. Listed for ceiling fans up to 35 lbs. Mud Box with Two-Gang Ring Cat. No. Size Std. Ctn. Std. Wt. A863D Mud Box with Two-Gang Ring A863DG Mud Box with Two-Gang Ring & Ground Lug Mud Box with 4" Square Ring 4" Square Ring not for luminaire Mud Box with 4-Inch Square Ring Mud Box Assemblies with Mounting Feet Carlon Mud Box Assemblies with Mounting Feet are specifically engineered and designed for use in Tunnel Form applications. The mounting feet are located on all four corners and enable the box to attach directly to the wall of the form using pop rivets. The pop rivets help keep the box in position during the pour and provide a safe, secure and rust-resistant mount. Cat. No. Size Std. Ctn. Std. Wt. A863-4SQF 4-Square Ring A863CFF Ceiling Ring A863CFGF Ceiling Ring and Ground Lug A863DF Double-Gang A863DGF Double-Gang and Ground Lug A863SF Single-Gang A863SGF Single-Gang and Ground Lug Cement Caps Included Except where noted by s

9 Boxes and Accessories Mounting Brackets CARLON EXCLUSIVE The Carlon ENT Mounting Bracket is specifically designed for use with Carlon ENT Mud Box Assemblies in vertical concrete walls where one- or two-gang boxes are needed. The stainless steel spring-loaded mechanism provides a secure outlet box between concrete forms while the soft-steel strap enables the outlet box to be secured to rebar. The bracket combination ensures a straight box opening and a concrete-tight fit. Mud Box not included. Cat. No. Size Std. Ctn. Std. Wt. A863MB Mud Box Mounting Kit 1.98 ENT Bridge Cat. No. Size Std. Ctn. Std. Wt. A293DEF ENT Bridge Front View CARLON EXCLUSIVE The Carlon ENT Bridge is designed to support long ENT runs in concrete pour applications. This makes pulling wire/cable a snap. Installation is easy simply mount the ENT bridge, using nails or screws, to the wood deck mounting and snap the ENT into place. The bridge is designed to hold the conduit in place while minimizing dips in the conduit over long runs. The Carlon ENT Bridge is manufactured out of a highly engineered thermoplastic material to provide extra strength and durability and can accommodate ENT sizes 1 2", 3 4" and 1". (The Carlon ENT bridge can be used with rigid non-metallic conduit too.) Back View 7Carlon Electrical Non-Metallic Tubing (ENT) System

10 Boxes and Accessories 8Carlon Electrical Non-Metallic Tubing (ENT) System Transition Adapters Male ENT to Schedule 40 and 80 PVC Conduit CARLON EXCLUSIVE Carlon Male ENT to Schedule 40 & 80 PVC Conduit Transition Adapters are designed to connect Schedule 40 conduit to Carlon Flex-Plus Blue ENT boxes and fittings. Simply solvent cement the PVC adapter to the Schedule 40 conduit and snap the adapter into Carlon s Quick Connect snap-in connector on the box or fitting. Carlon Male ENT to Schedule 40 & 80 Adapters are concrete tight and available in sizes 1 2", 3 4" and 1". Cat. No. ENT to EMT Carlon ENT to EMT Transition Adapters are designed to easily transition from Carlon Flex-Plus Blue ENT to EMT using Carlon s Quick Connect snap-in design. The EMT is held securely in place using the small screw (provided). This helps prevent the EMT from slipping/shifting out of the adapter. All ENT to EMT adapters are manufactured out of polycarbonate material to provide extra strength and durability. They re concrete tight and available in sizes 1 2", 3 4" and 1". Cat. No. Reducers CARLON EXCLUSIVE Carlon ENT Reducers are designed to provide an easy transition from 1" Carlon ENT to 3 /4" ENT or from 3 4" Carlon ENT to 1 2" ENT. They re concrete tight and manufactured out of polycarbonate material to provide extra strength and durability. Carlon ENT Reducers provide flexibility while on the jobsite by minimizing the need to carry size-specific boxes and fittings. Carlon ENT Reducers provide the versatility to convert Carlon fittings and boxes to many different sizes and configurations. Cat. No. Size Size Size Std. Ctn. Std. Ctn. Std. Ctn. Std. Wt. A263D 1 2" ENT to 1 2" Sch. 40 or Sch A263E 3 4" ENT to 3 4" Sch. 40 or Sch A263F 1" ENT to 1" Sch. 40 or Sch Std. Wt. A245D 1 2" ENT to 1 /2" EMT A245E 3 4" ENT to 3 /4" EMT A245F 1" ENT to 1" EMT Std. Wt. A273DE 3 4" 1 2" A273EF 1" 3 4" E32447 E86720 E86720

11 Boxes and Accessories Outlet and Switch Boxes Eccentric Knockouts CARLON EXCLUSIVE Carlon ENT Outlet and Switch Boxes with Eccentric Knockouts are designed to enable selective ENT openings 1 2", 3 4" and 1" based on application needs. They provide the largest capacity available on the market today 22 cu. in. Single-Gang, and 38 cu. in. Double-Gang and can be mounted to wood or steel studs. Carlon ENT Outlet and Switch Boxes with Eccentric Knockouts are manufactured out of a highly engineered thermoplastic material to provide extra strength and durability and are available in single-gang and double-gang styles. Note: The double-gang version is also a 4-in. square box. E42728 Single-Gang 22 Cu. In. Cat. No. Size Capacity Cu. in. Std. Ctn. Std. Wt. A122 Single-Gang UL Classified for 2-hour-or-less fire-resistant fire wall assemblies Combination Two-Gang/Four-Inch Square Box 38 Cu. In. Cat. No. Size Outlet Box Divider Carlon ENT Outlet Box Divider is specifically designed for applications where a combined high- and low-voltage closed-back box is needed, such as for placement in a fire-rated wall. Just slip the divider into place to get the split box you need. The Carlon ENT Outlet Box Divider is UL Recognized for use with the Carlon A238 Box only. Std. Std. Wt. Cat. No. Size Ctn. A238DIV Capacity Cu. in. Std. Ctn. Std. Wt. A238 Two-Gang UL Classified for 2-hour-or-less fire-resistant fire wall assemblies 9Carlon Electrical Non-Metallic Tubing (ENT) System

12 Carlon Electrical Non-Metallic Tubing (ENT) System Boxes and Accessories Quick-Connect Adapters and Couplings Carlon one-piece ENT Quick-Connect Couplings, Threaded Adapters and Snap-In Terminator Adapters are suitable for damp locations Quick-Connect Couplings and Threaded Adapters are concrete-tight when used with Carlon ENT All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement Couplings Rigid non-metallic conduit fittings are recommended for use with Carlon 1 1 /4" 2" Flex-Plus Blue ENT Use of ENT Blue Quick-Set Cement is required; see page 14 for details Cat. No. Size (in.) Std. Ctn. Std. Wt. A240D A240E A240F Threaded Adapters E86720 Cat. No. Size (in.) Std. Ctn. Std. Wt. A243D A243E A243F LR92248 When One-Piece Quick-Connect Snap-In Terminator Adapters are installed in a concrete application, Carlon flat sealing washers must be used on the box connection ends Snap-In Adapters Cat. No. Size (in.) Std. Ctn. Std. Wt. A253D A253E A253F Rigid Non-Metallic Conduit Adapters and Couplings Male Terminal Adapters For adapting nonmetallic conduits to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on other. L S D B A OD C Standard Couplings All socket fittings should be attached using ENT Blue Quick-Set Cement (page 14). Using Carlon fittings with Carlon non-metallic conduit ensures system integrity. Socket type for joining non-metallic conduit. L E32447 C LR31146 O.D. A B I.D. Cat. Std. Typical Max. Typical Std. Wt. No. Size Ctn. A B Min. D OD C S L E943D E943E E943F E943G E943H E943J *All measurements in inches, unless otherwise noted. Cat. Std. Typical Max. Typical Std. Wt. No. Size Ctn. A B Min. D OD C L E940D E940E E940F E940G E940H E940J *All measurements in inches, unless otherwise noted. 10

13 Boxes and Accessories 2 1 /2" and 4" Mud Boxes and Covers UL Classified for 2-hour-or-less fire-resistant floor/ceiling assemblies Base Rings Listed for use with ceiling fans up to 35 lbs. and for fixture support up to 50 lbs. Cat. No. Size Std. Ctn. Std. Wt. A861 Without Ground Lug C861G With Ground Lug Covers Cat. No. Size (In.) Std. Ctn. Std. Wt. A862D Deep ( 1 2" KOs) A862E Deep ( 3 4" KOs) A864D 4 Deep ( 1 2" KOs) A864E 4 Deep ( 3 4" KOs) A864F 4 Deep (1" KOs) Quick-Connect Outlet and Switch Boxes Suitable for masonry walls Meets NEMA OS-2 UL Classified for 2-hour-or-less fire-resistant wall assemblies E42728 LR31146 Carlon Electrical Non-Metallic Tubing (ENT) System Single-Gang 16 Cu. In. E42728 Cat. No. Size (In.) Std. Ctn. Std. Wt. A58381D 3 x x 3 ( 1 2" KOs) A58381E 3 x x 3 ( 3 4" KOs) " Square 20 Cu. In. Cat. No. Size (In.) Std. Ctn. Std. Wt. A52151D 4 x 4 x ( 1 2" KOs) A52151E 4 x 4 x ( 3 4" KOs) A521DE 4 x 4 x ( 1 2" & 3 4" KOs) " Square 30.3 Cu. In. Cat. No. Size (In.) Std. Ctn. Std. Wt. A52171D 4 x 4 x ( 1 2" KOs) A52171E 4 x 4 x ( 3 4" KOs) A5217DE 4 x 4 x ( 1 2" & 3 4" KOs)

14 Boxes and Accessories Carlon Electrical Non-Metallic Tubing (ENT) System ENT Box with Adapters UL Classified for 2-hour-or-less fire-resistant wall assemblies 4" Square Cu. In. ENT Box with Adapters Cat. No. Size (in.) Std. Ctn. Std. Wt. A5329DE 4 x 4 x ( 1 2" & 3 4" KOs) UL Listed E42728 Box Back Wall Support Cat. No. Size Std. Ctn. Std. Wt. A540DS For use with 1 2" Knockout ENT Box Extenders UL Classified for 2-hour-or-less fire-resistant wall assemblies Single-Gang E42728 Cat. No. Rise (in.) Cu. In. Std. Ctn. Std. Wt. A A A A A Two-Gang Cat. No. Rise (in.) Cu. In. Std. Ctn. Std. Wt. A400 Blank A A A

15 Boxes and Accessories Round Covers for Octagon Ceiling Boxes Round Plaster Rings Listed for fixture support up to 50 lbs. UL Classified for 2-hour-or-less fire-resistant assemblies Cat. No. Rise (in.) Cu. In. Std. Ctn. Std. Wt. A A Round Blank Covers Cat. No. Rise Cu. In. Std. Ctn. Std. Wt. E460R-CAR Blank A470D Blank with 1 2" KO Quick Connect 4" Octagon Ceiling Boxes Carlon ceiling boxes and round plaster rings are produced from a special high heat-resistant engineered plastic material developed specifically for fixture support Listed for fixture support up to 50 lbs. UL Classified for 2-hour-or-less fire resistant floor/ceiling assemblies E42728 Carlon Electrical Non-Metallic Tubing (ENT) System Ceiling Box 20.5 Cu. In. E42728 Cat. No. Size (in.) Std. Ctn. Std. Wt. A615D (4) Deep ( 1 2" KOs) A615E (4) Deep ( 3 4" KOs) A615DE (4) Deep ( 1 2" & 3 4" KOs) Ceiling Box with J Mount 20.5 Cu. In. Cat. No. Size (in.) Std. Ctn. Std. Wt. A615DJ (4) Deep ( 1 2" KOs) Ceiling Box with L Bracket 20.5 Cu. In. Cat. No. Size (in.) Std. Ctn. Std. Wt. A615DL (4) Deep ( 1 2" KOs) Ceiling Box with Adjustable Hanger Bar 20.5 Cu. In. Cat. No. Size (in.) Std. Ctn. Std. Wt. A615DH (4) Deep ( 1 2" KOs) Adjust from " to " 13

16 Carlon Electrical Non-Metallic Tubing (ENT) System Boxes and Accessories PVC Conduit Cutters Small Cutter For fast, smooth field cuts of 1 2" through 1" Flex-Plus Blue ENT. Cat. No. Size (in.) Std. Ctn. CC120B 8 10 Medium Cutter Handheld cutter makes fast, square, smooth field cuts on conduit from 1 2" through 1 1 4". Produces burr-free cut with no shavings. Fits into pocket or pouch. Cat. No. Size (in.) Std. Ctn. CC Large Cutter For clean cuts of conduit 1 2" through 2". Concrete Sleeves Non-metallic concrete sleeve forms are the easy way to form holes in concrete. They install in seconds with nails, screws or staples and are easily removed. Concrete will not adhere to them. Concrete sleeves are adjustable to any slab thickness. Cat. No. Tape Min. O.D. A (in.) B (in.) Prelubricated, woven polyester tape made from low-friction, high abrasion-resistant yarns, providing a low coefficient of friction. Tape is printed with sequential footage markings for accurate measurements. Std. Ctn. Std. Wt. E92CSH E92CSJ E92CSL E92CSN E92CSP E92CSR A B 8 3 4" Cat. No. Size (in.) Std. Ctn. CC cat. No. size (in.) tensile strength (Lbs.) reel lengths (ft.) TL TL TL TL TL Other tapes are available. Consult your sales service location for additional information. Carlon Low VOC Cement (MSDS sheets available at All Weather ENT Blue Recommended pipe application and sizes Required for use with Flex-Plus ENT (Electrical Non-Metallic Tubing), Riser-Gard, P&C Flex and Carlon PVC fittings. Up through 6" diameter. Set-up time (Evaporation Rate) Recommended installation temp. Lap 73 F Viscosity at 75 F as manufactured F 6 8 Minutes -5 to 100 F 2 Hrs. 350 PSI CPS F 4 5 Minutes 16 Hrs. 800 PSI F 3 4 Minutes 72 Hrs PSI F 1 2 Minutes F Minutes ENT cement required for use with ENT and Rigid Non-Metallic Conduit Fittings. cat. No. Size Applicator Description STD. Ctn. STD. Wt. VC9992 Quart Dauber All-Weather Quick-Set Blue Meets ASTM D

17 Flexible Raceway Systems Carlon Plenum-Gard Raceway Plenum-Gard is a UL Listed non-metallic corrugated flexible conduit for use in plenum, riser and general purpose applications. Plenum-Gard is manufactured from PVDF resin, which is extremely durable and resistant to abrasion and mechanical damage before/after cable installation. Plenum-Gard is listed to UL 2024 in accordance with the National Electrical Code for plenum, riser, general purpose and other cabling/ optical fiber/telecommunication applications as defined in Articles 725, 770, 800 and 820. Important: Installed cables must be plenum rated and the UL Listing must be printed on the product. Abandoned cables MUST be removed (reference NEC ). Technical Info UL Standard 2024 Value Maximum Flame Propagation 5 ft. Max. Peak Optical Smoke Density 0.5 Max. Average Optical Smoke Density 0.15 Storage: -4 to 158 F Handling: -4 to 104 F No UV protection (not suitable for outdoor use) Do not store outside Standard Stock Reels CAT. No. Size (IN.) Color Pull Tape Reel Size (F x W) (IN.) Reel type Applications: Plenum, Riser and General Purpose NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. Reel Length (ft.) Reel WT.(LBs.) Reel WT. Per 100 Ft. (LBs.) CD4X1C Orange 200 lb. 34 x 23 Wood 1, CE4X Orange Empty 34 x 23 Wood 1, CE4X1-1000S 3 4 Orange Empty/Split 34 x 23 Wood 1, CE4X1C-1000 Orange 900 lb. 34 x 23 Wood 1, CF4X1C-500 Orange 900 lb. 34 x 23 Wood CF4X1C-1000 Orange 900 lb. 48 x 28 Wood 1, CF4X1C Orange 900 lb. 48 x 28 Wood 1, CF4X1C-5200 Orange 900 lb. 66 x 41 Wood 5, CF4X1C-6500 Orange 900 lb. 72 x 41 Wood 6, CF4X1C-8000 Orange 900 lb. 82 x 41 Wood 8, CG4X1C-500 Orange 900 lb. 48 x 28 Wood CG4X1-500S Orange Empty/Split 48 x 28 Wood CG4X1C-900 Orange 900 lb. 48 x 45 Wood CG4X1C Orange 900 lb. 48 x 45 Wood 1, CG4X1C-3200 Orange 900 lb. 66 x 41 Wood 3, CG4X1C-6500 Orange 900 lb. 96 x 41 Wood 6, CG4X1-900S Orange Empty/Split 48 x 28 Wood CH4X1C-350 Orange 900 lb. 48 x 28 Wood CH4X1C Orange 900 lb. 48 x 45 Wood 1, CH4X1C-4000 Orange 900 lb. 82 x 41 Wood 4, CJ4X1-200S Orange Empty/Split 48 x 28 Wood CJ4X1C-225 Orange 900 lb. 48 x 28 Wood CJ4X1C Orange 900 lb. 48 x 45 Wood CJ4X1C-1400 Orange 900 lb. 82 x 41 Wood 1, CJ4X1C-2000 Orange 900 lb. 82 x 41 Wood 2, CJ4X1C-2800 Orange 900 lb. 82 x 41 Wood 2, CL4X1C Orange 900 lb. 48 x 45 Wood E13938 FT-6 Rated Carlon Electrical Non-Metallic Tubing (ENT) System 15

18 Carlon Electrical Non-Metallic Tubing (ENT) System Flexible Raceway Systems Carlon Plenum-Gard Raceway (continued) Features: For use in plenum areas per NEC Articles 725, 770, 800 and 820 Sizes 1 2" through 3" Pre-installed pull tape available in sizes 1 2" through 3" Standard Stock Coils Outside diameters meet IPS dimensions UL Listed raceway meeting UL 2024 Footage sequentially marked Single-peak design CAT. No. Size (IN.) Color Pull Tape Coil Length (ft.) Product WT. per 100 ft.(lbs.) CD4X1C Orange 900 lb CE4X1-350* 3 4 Orange Empty CE4X1-350S Orange Empty/Split CF4X1C-100* Orange 900 lb CF4X1-100S* Orange Empty/Split CF4X1C-250* 1 Orange 900 lb CF4X1-250 Orange Empty CF4X1-250S* Orange Empty/Split CG4X1C-200* Orange 900 lb CG4X1-200S Orange Empty/Split CH4X1C-150* Orange 900 lb CH4X1-150S Orange Empty/Split CJ4X1C-100* 2 Orange 900 lb CJ4X1-100S Orange Empty/Split * Overnight Shippable Specifications size (IN.) I.D. Min. Ref. (IN.) Min. O.D. (IN.) Max. O.D. (IN.) Min. Bend Radius (IN.) Custom Orders How to Build a Part Number: Position 1 Product Position 2 Size (IN.) Position 3 Type Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length C = Plenum-Gard D = = Corrugated X = Standard 1 = Orange C = 900 LB. Tape Example E = = Black = Feet F = 1 3 = Gray -1000S = 1000 Feet Split G = = White H = = Blue J = 2 7 = Yellow L = 3 8 = Red Custom orders are not returnable Custom lengths are available in minimum order quantities of 1,000 ft. Custom color runs are available in minimum order quantities of 10,000 ft. Options: Color: Black, Blue, Gray, Red, White and Yellow Two-, three- or four-way parallel Split duct Custom print line 16

19 Flexible Raceway Systems Carlon Riser-Gard Raceway Riser-Gard is a non-metallic flexible raceway for use in riser and general purpose applications. Riser-Gard is UL Listed and is available with tape pre-installed. Riser-Gard is listed to UL 2024 Standard for riser applications or optical fiber/communications raceways. Riser-Gard is listed to UL 2024 in accordance with the National Electrical Code per Articles 725, 770, 800 and 820 for riser, general purpose and other cabling/optical fiber/telecommunication applications. Riser-Gard is suitable for use in vertical runs in a shaft or between floors, as well as areas other than the plenum. Important: Installed cables must be of suitable rating for the application. Technical Info UL listed to 2024 test method maximum value Maximum Flame Propagation UL ft. Maximum Air Temperature at 12 ft. UL F Storage: -4 to 158 F Handling: -4 to 104 F No UV protection (not suitable for outdoor use) Do not store outside Standard Stock Reels CAT. No. Size (IN.) Color Pull Tape Applications: Riser and General Purpose NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. Reel Size (F x W) (IN.) Reel type Reel Length (ft.) Reel WT.(LBs.) Reel WT. Per 100 Ft. (LBs.) DE4X Orange Empty 34 x 23 W 1, DF4X1C-500R Orange 900 lb. 43 x 23 W DF4X1C-1000 Orange 900 lb. 48 x 28 W 1, DF4X1C-1500 Orange 900 lb. 48 x 28 W 1, DF4X1C Orange 900 lb. 48 x 45 W 2, DF4X1C-5200 Orange 900 lb. 66 x 41 W 5, DF4X1C-6500 Orange 900 lb. 72 x 41 W 6, DF4X1C-7000 Orange 900 lb. 72 x 45 S 7, DF4X1C-9400 Orange 900 lb. 84 x 45 S 9, DG4X1C-900 Orange 900 lb. 48 x 28 W DG4X1C-500R Orange 900 lb. 48 x 23 W DG4X1C-1500 Orange 900 lb. 48 x 45 W 1, DG4X1C Orange 900 lb. 48 x 45 W 1, DG4X1C-3200 Orange 900 lb. 66 x 41 W 3, DG4X1C-4500 Orange 900 lb. 72 x 45 S 4, DG4X1C-5600 Orange 900 lb. 82 x 41 W 5, DG4X1C-6500 Orange 900 lb. 96 x 41 S 6, DH4X1C-1200 Orange 900 lb. 48 x 45 W 1, DH4X1C Orange 900 lb. 82 x 45 S DH4X1C-4500 Orange 900 lb. 84 x 45 S 4, DJ4X1C-700 Orange 900 lb. 48 x 45 W DJ4X1C Orange 900 lb. 82 x 41 W DJ4X1C-2800 Orange 900 lb. 84 x 45 S 2, DL4X1C Orange 900 lb. 72 x 41 W W = Wood S = Steel E13938 FT-6 Rated Carlon Electrical Non-Metallic Tubing (ENT) System 17

20 Carlon Electrical Non-Metallic Tubing (ENT) System Flexible Raceway Systems Carlon Riser-Gard Raceway (continued) Features: For use in riser and general purpose areas per NEC Articles 725, 770, 800 and 820 Riser-Gard is also suitable for direct burial, not approved for exposed applications Note: UL has not evaluated Riser-Gard for this application. Standard Stock Coils UL Listed raceway meeting UL 2024 Available in sizes 3 4" through 3" Pull tape can be factory pre-installed in 1" through 3" Outside diameters meet IPS dimensions Footage sequentially marked CAT. No. Size (IN.) Color Pull Tape Coil Length (ft.) Product WT. per 100 ft.(lbs.) DE4X1-350* 3 4 Orange Empty DF4X1C-125 Orange 900 lb DF4X1C-250* Orange 900 lb DF4X Orange Empty DF4X1C-500 Orange 900 lb DF4X1-250S* Orange Empty/Split DG4X1-200 Orange Empty DG4X1-200S* Orange Empty/Split DG4X1C-200* Orange 900 lb DG4X1C-500 Orange 900 lb DH4X1-150S Orange Empty/Split DH4X1C-150* Orange 900 lb DJ4X1-100S 2 Orange Empty/Split DJ4X1C-100* Orange 900 lb DL4X1C Orange 900 lb * Overnight Shippable Specifications size (IN.) I.D. Min. Ref. (IN.) Min. O.D. (IN.) Max. O.D. (IN.) Min. Bend Radius (IN.) Custom Orders How to Build a Part Number: Position 1 Product Position 2 Size (IN.) Position 3 Type Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length D = Riser-Gard E = = Corrugated X = Standard 1 = Orange C = 900 lb. Tape Example F = 1 2 = Black = Feet G = = Gray -1000S = 1000 Feet Split H = = White J = 2 5 = Blue L = 3 7 = Yellow 8 = Red Custom orders are not returnable Custom lengths are available in minimum order quantities of 1,000 ft. Custom color runs are available in minimum order quantities of 10,000 ft. Options: Color: Black, Blue, Gray, Red, White and Yellow Two-, three- or four-way parallel Split duct Custom print line 18

21 Flexible Raceway Systems Carlon Hal-Free Riser-Gard Raceway Hal-Free Riser-Gard is a halogen-free non-metallic flexible raceway for use in riser and general purpose applications. In the event of a fire, this product will not release halogen elements into the air, which makes it ideal for applications in tunnels, laboratories and high-tech environments. Hal-Free Riser-Gard is listed to UL 2024 in accordance with NEC Articles 725, 770, 800 and 820. Custom lengths and split ducts are available upon request. Hal-Free Riser-Gard is available in white only. Features: Free from halogen elements Compliant with NEC Articles 725, 770, 800 and 820 Available in sizes 1" through 2" Available in white only Sequentially marked footage Technical Info UL listed to 2024 test method maximum value Maximum Flame Propagation UL ' 6" ft. Maximum Air Temperature UL F Applications: Riser and General Purpose NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. Carlon Electrical Non-Metallic Tubing (ENT) System Storage and Handling: -4 to 150 F No UV protection (not suitable for outdoor use) Do not store outside Standard Stock Reels CAT. No. Size (IN.) Color Nom. i.d (IN.) nom. o.d. (IN.) Pull Tape Reel Size (F x W) (IN.) Reel type Reel length (ft.) Reel Wt. E FT-4 Rated Product Wt. per 100 ft. HF4X4C White lb. 72" x 41" W 5, HG4X4C White lb. 72" x 41" W 4, HH4X4C White lb. 66" x 41" W 2, HJ4X4C White lb. 82" x 41" W 2, Custom Orders How to Build a Part Number: Position 1 Product Position 2 Size (IN.) Position 3 Type Custom orders are not returnable Custom lengths are available in minimum order quantities of 1,000 ft. Position 4 Wall Position 5 Color Position 6 Pull Line Position 7 Length H = Hal-Free F = 1 4 = Corrugated X = Standard 4 = White C = 900 lb. Tape Example G = = Feet H = S = 1000 Feet Split J = 2 19

22 Carlon Electrical Non-Metallic Tubing (ENT) System Flexible Raceway Systems Carlon Plenum Duct Technical Info: Maximum flame propagation distance is less than 5.0 ft. Peak optical density of smoke is less than 0.50 Average optical density of smoke is less than 0.15 UL Listed to UL 2024 Standard FT-6 Rated Standard Stock Reels CAT. No. Size (IN.) Color Pull Tape Reel Size (IN.) Reel length (ft.) Applications: Plenum, Riser and General Purpose Applications per NEC Articles 725, 770, 800 and 820 Reel Wt. Product Wt. per 100 ft. PLM100T-500 White 900 lb. 34 x PLM100T White 900 lb. 48 x 28 1, PLM100T-5000 White 900 lb. 72 x 41 5, PLM100T-8000 White 900 lb. 82 x 41 8, PLM125T-500 White 900 lb. 34 x PLM125T White 900 lb. 48 x 30 1, PLM125T-5000 White 900 lb. 72 x 41 5, PLM125T-6000 White 900 lb. 82 x 41 6, PLM150T White 900 lb. 66 x 41 2, PLM150T-4000 White 900 lb. 82 x 41 4, PLM200T White 900 lb. 82 x 41 2, Standard Stock Coils/Box CAT. No. Size (IN.) Color Pull Tape box size (IN.) coil length (ft.) Product Wt. per 100 ft. PLM100T-250B2 1 White 900 lb. 34 x 14 x PLM125T-250B White 900 lb. 39 x 15 x Specifications size I.D. Min. Ref. Min. O.D. Max. O.D. Min. Bend Radius Custom Orders How to Build a Part Number: Position 1 Product Position 2 Size (IN.) Position 3 Pull Line Position 4 Length PLM = PLENUM 100 = 1 T = 900 lb. Tape Example 125 = = Feet 150 = = 2 NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. 20

23 Flexible Raceway Systems Carlon Riser Duct Applications: Riser and General Purpose Applications per NEC Articles 725, Technical Info: Maximum flame propagation: 6.0 ft. max. value Do not store outside No UV protection UL Listed to UL 2024 FT-4 Rated Standard Stock Reels CAT. No. Size (IN.) Color Pull Tape Reel Size (IN.) Reel length (ft.) 770, 800 and 820. Suitable for vertical runs in a shaft or between floors. Reel Wt. Product Wt. per 100 ft. RIS100T Orange 900 lb. 66 x 41 5, RIS125T Orange 900 lb. 72 x 41 4, RIS150T Orange 900 lb. 66 x 41 2, RIS200T Orange 900 lb. 66 x 41 2, Specifications size (IN.) I.D. Min. Ref. (IN.) Min. O.D. (IN.) Max. O.D. (IN.) Min. Bend Radius (IN.) Custom Orders How to Build a Part Number: Position 1 Product Position 2 Size (IN.) Position 3 pull line Position 4 length RIS = Riser 100 = 1 T = 900 lb. Tape Example 125 = = Feet 150 = = 2 Carlon Electrical Non-Metallic Tubing (ENT) System Carlon Hal-Free Riser Duct Technical Info: Maximum flame propagation: 6.0 ft. max. value Do not store outside No UV protection UL Listed to UL 2024 Standard FT-4 Rated Standard Stock Reels CAT. No. Size (IN.) Color Pull Tape Reel Size (IN.) Reel length (ft.) Reel Wt. Product Wt. per 100 ft. RHF100T White 900 lb. 66 x 41 5, RHF125T White 900 lb. 72 x 41 4, RHF150T White 900 lb. 66 x 41 2, RHF200T White 900 lb. 82 x 41 2, Specifications Custom Orders How to Build a Part Number: size (IN.) I.D. Min. Ref. (IN.) Min. O.D. (IN.) Max. O.D. (IN.) Min. Bend Radius (IN.) Position 1 Product Position 2 Size (IN.) Applications: Riser and General Purpose Applications per NEC Articles 725, 770, 800 and 820. Position 3 pull line Position 4 length RHF = Hal-Free Riser 100 = 1 T = 900 lb. Tape Example 125 = = Feet 150 = = 2 21

24 Carlon Electrical Non-Metallic Tubing (ENT) System Flexible Raceway Systems Small. Slick. Speedy. Ideal for Telecom Installs! Carlon Micro-Gard Plenum and Micro-Gard Riser Duct Carlon Micro-Gard Plenum and Micro-Gard Riser is specifically designed to provide fiber pathways in plenum and riser applications in Multi-Dwelling Units (MDUs) and other premise structures. The 8/6 and 12/10 mm size conduits can be installed individually or used to optimize space in existing duct structures. And the small size significantly reduces the structural damage caused during pass-throughs. Micro-Gard Plenum and Riser is UL Listed for plenum and riser applications. It s easy to handle, easy to install and easy to conceal, making it the ideal MDU cable management system. Features: UL and cul Listed to UL 2024 for plenum and riser applications Compliant with NEC Articles 725, 770, 800 and 820 Two sizes: 8/6mm and 12/10mm. The smaller sizes accommodate the size constraints of multi-dwelling units and make installations faster and easier Smooth interior wall eliminates snag points and provides low coefficient of friction, regardless of whether jetting or pull-tape is used Superior burn-through resistance for longer cable pulls Pre-lubricated, factory installed pull-tape makes installing cable faster and easier (option available for empty duct) Sequentially marked footage to easily identify lengths and reduce waste Reel sizes from 1,000 to 5,000 feet for easy handling on the jobsite Future-proofing raceway system for fast, easy wire/cable upgrades, changes and moves Used in cable bundles Micro-Gard Plenum NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. Micro-Gard Riser E

25 Flexible Raceway Systems Carlon Micro-Gard Plenum and Micro-Gard Riser cat. No. Size Type Color Factory Installed Pre-Lubricated Radius (in.)* Min. Bend Feet/Reel MGP08MT /6 mm Plenum White 50 lb. Cord 2 1, MGP08MT /6 mm Plenum White 50 lb. Cord 2 2, MGP08MT /6 mm Plenum White 50 lb. Cord 2 5, MGP12MT /10 mm Plenum White 50 lb. Cord 4 1, MGP12MT /10 mm Plenum White 50 lb. Cord 4 2, MGP12MT /10 mm Plenum White 50 lb. Cord 4 5, MGR08JT /6 mm Riser Orange 50 lb. Cord 2 1, MGR08JT /6 mm Riser Orange 50 lb. Cord 2 2, MGR08JT /6 mm Riser Orange 50 lb. Cord 2 5, MGR12JT /10 mm Riser Orange 50 lb. Cord 4 1, MGR12JT /10 mm Riser Orange 50 lb. Cord 4 2, MGR12JT /10 mm Riser Orange 50 lb. Cord 4 5, *NOTE: Do not exceed the minimum bend radius during installation of the product. Micro-Gard Plenum Dimensions Smooth O.D./Ribbed I.D. CAT. no. outside diameter wall inside dia. (min.) inch mm inch mm inch mm # Ribs Reel Size (in.) std. wt. (lb./100 ft.) MGP12RMT.472 +/ / / / MGP08RMT.315 +/ / / / Carlon Electrical Non-Metallic Tubing (ENT) System Micro-Gard Riser Dimensions Smooth O.D./Ribbed I.D. CAT. no. outside diameter wall inside dia. (min.) inch mm inch mm inch mm # Ribs std. wt. (lb./100 ft.) MGR12RJT.472 +/ / / / MGR08RJT.315 +/ / / / How to Interpret a Catalog Number Position 1 Product Position 2 Type Position 3 Size Position 4 Color Position 5 Pull Line Position 6 Length MG = Micro-Gard P = Plenum 08 = 8/6mm J = Orange T = 50 lb. Cord Example R = Riser 12 = 12/10mm M = White = Feet 23

26 Carlon Electrical Non-Metallic Tubing (ENT) System Flexible Raceway System Accessories For use with Riser-Gard and General Purpose Non-Metallic Adapters and Couplings Couplings cat. No. Size (IN.) Color std. ctn. std. wt. SCA240E 3 4 Orange SCA240F 1 Orange Threaded Adapters cat. No. Size (IN.) Color std. ctn. Snap-In Adapters cat. No. Size (IN.) Color std. ctn. std. wt. SCA243E 3 4 Orange SCA243F 1 Orange std. wt. SCA253E 3 4 Orange SCA253F 1 Orange LR31146 For use with Plenum-Gard Non-Metallic Adapters and Couplings Couplings cat. No. Size (IN.) Color std. ctn. std. wt. A340F 1 Orange Threaded Adapters cat. No. Size (IN.) Color std. ctn. std. wt. A343F 1 Orange Snap-In Adapters cat. No. Size (IN.) Color std. ctn. std. wt. A353F 1 Orange

27 Flexible Raceway System Accessories For use with Riser-Gard Non-Metallic Male Terminal Adapters For adapting non-metallic conduits to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on other. cat. No. Size (IN.) Std. Ctn. Color Dimensions (IN.) Typical Std. Typical Min. Max. Wt. A B D O.D. C T L E943E Gray E943F 1 50 Gray E943G Gray E943H Gray E943J 2 50 Gray SCE943G Orange SCE943H Orange SCE943J 2 50 Orange L S D and General Purpose B A O.D. C Non-Metallic Standard Couplings All socket fittings should be attached Using Carlon solvent cement. Using Carlon fittings with Carlon non-metallic conduit ensures system integrity. cat. No. Size (IN.) Std. Ctn. Socket type for joining non-metallic conduit. Color L C E32447 Except where noted by O.D. A B I.D. Dimensions (IN.) Typical Typical Std. Max. Wt. A B Min. D O.D. C l E940E Gray E940F 1 50 Gray E940G Gray E940H Gray E940J 2 30 Gray SCE940G Orange SCE940H Orange SCE940J 2 30 Orange Carlon Electrical Non-Metallic Tubing (ENT) System For use with Plenum-Gard Metallic Terminal Adapter Flat Sealing Washer Where a waterproof termination is required into any enclosure (metallic or non-metallic), install the neoprene washer over the threads of a terminal adapter before inserting into the enclosure. Use a standard locknut or threaded bushing to secure the assembly. cat. No. Size (IN.) std. ctn. std. wt cat. No. Size (IN.) std. ctn. std. wt. E943EW E943FW E943GW E943HW E943JW

28 Flexible Raceway System Accessories Carlon Electrical Non-Metallic Tubing (ENT) System Low-Voltage Boxes and Brackets Dual-Voltage Box/Bracket* cat. No. cover volume std. ctn. std. wt. SC200DV 1-Gang 20.5 cu. in *U.S. Patent D463,376. Low-Voltage Add-On Bracket* cat. No. Size std. ctn. std. wt. SC100SC 1-Gang * U.S. Patent D459,312. U.S. Patent 6,710,245. U.S. Patent 6,872,884. E11461 E SC100SC SC200DV Low-Voltage Adjustable Brackets* E cat. No. Size std. ctn. std. wt. SC100ADJC SC100ADJC 1-Gang SC200ADJC 2-Gang *U.S. Patent 5,289,934. Low-Voltage Brackets* E cat. No. size resi-rings std. ctn. std. wt. SC100A 1-Gang 3 4, 1, SC200A 2-Gang 3 4, 1, SC300A 3-Gang * U.S. Patent D457,140. U.S. Patent D462,664. U.S. Patent 6,812,405. SC100A For other Carlon Flexible Raceway System Accessories, refer to the following pages: Mud Box Assemblies p. 6 Mud Boxes and Covers p. 11 Quick-Connect Outlet and Switch Boxes p. 11 ENT Box and Extenders p. 12 Octagon Ceiling Boxes and Covers p. 13 Cutting Tools p. 14 SC300A SC200A 26

29 Flexible Raceway System Accessories Carlon *Meets ASTM D2564 Medium Clear Recommended pipe application and sizes Recommended for all grades and types of Carlon wireway and fittings, except Flex-Plus Blue ENT (Electrical Non- Metallic Tubing.) Up through 6" diameter. Low-VOC Cements Set-up time (Evaporation Rate) Recommended installation temp. Lap 73 F Viscosity at 75 as manufactured F Not recommended 40 to 100 F 2 Hrs. 350 psi cps F 5 6 minutes 16 Hrs. 800 psi F 3 4 minutes 72 Hrs. 1,500 psi F 1 2 minutes cat. No. Size Applicator Description STD. Ctn. STD. Wt. VC9963 Pint Dauber PVC Medium Clear VC9962 Quart Dauber PVC Medium Clear VC9961P Gallon PVC Medium Clear Meets ASTM D Carlon Electrical Non-Metallic Tubing (ENT) System Regular Clear Recommended pipe application and sizes Recommended for all grades and types of Carlon wireway and fittings, except Flex-Plus Blue ENT (Electrical Non- Metallic Tubing.) Up through 6" diameter. Set-up time (Evaporation Rate) Recommended installation temp. Lap 73 F Viscosity at 75 as manufactured F Not recommended 40 to 100 F 2 Hrs. 350 psi cps F 5 6 minutes 16 Hrs. 800 psi F 3 4 minutes 72 Hrs. 1,500 psi F 1 2 minutes cat. No. Size Applicator Description VC Pint Dauber PVC Regular Clear Meets ASTM D STD. Ctn. STD. Wt. 27

30 Carlon Electrical Non-Metallic Tubing (ENT) System Flexible Raceway System Accessories Carlon Low-VOC Cements (continued) All Weather Clear Recommended pipe application and sizes Recommended for all grades and types of Carlon wireway and fittings, except Flex-Plus Blue ENT (Electrical Non-Metallic Tubing.) Up through 6" diameter. Set-up time (Evaporation Rate) cat. No. Size Applicator Description Recommended installation temp. Lap 73 F Viscosity at 75 as manufactured F 6 8 Minutes -5 to 100 F 2 Hrs. 350 PSI CPS F 4 5 Minutes 16 Hrs. 800 PSI F 3 4 Minutes 72 Hrs. 1,500 PSI F 1 2 Minutes F Minutes STD. Ctn. STD. Wt. VC Pint Dauber All Weather Quick-Set Cement VC9983 Pint Dauber All Weather Quick-Set Cement VC9982 Quart Dauber All Weather Quick-Set Cement VC9981P Gallon All Weather Quick-Set Cement Meets ASTM D Gray Recommended pipe application and sizes Recommended for all grades and types of Carlon wireway and fittings, except Flex-Plus Blue ENT (Electrical Non-Metallic Tubing.) Up through 6" diameter. VOC emission of 490 grams/liter per the Bay and South Coast test method. Set-up time (Evaporation Rate) Recommended installation temp. Lap 73 F Viscosity at 75 as manufactured F Not recommended 40 to 100 F 2 Hrs. 350 psi cps F 5 6 minutes 16 Hrs. 800 psi F 3 4 minutes 72 Hrs. 1,500 psi F 1 2 minutes cat. No. Size Applicator Description STD. Ctn. STD. Wt. VC9LV Pint Dauber Low VOC Gray VC9LV3 Pint Dauber Low VOC Gray VC9LV2 Quart Dauber Low VOC Gray Meets ASTM D

31 Technical Information Concrete Encasement Guidelines for Carlon 1. Cut ENT square and clean. 2. Insert end into fitting, making sure two (2) full corrugations are snapped into fitting beyond flexible tabs (2 clicks). 3. ENT should be tied to rebar at 2 3 foot intervals to prevent flotation. Keep ENT straight. Small deflections over a long run may accumulate significant degrees of bend that will affect conductor installation. Suitable materials include wire, tie wraps and tape. 4. When using rigid non-metallic conduit fittings for concrete tight performance: ENT Specifications: 1.1 Electrical Non-Metallic Tubing (ENT) is designed to replace EMT, flexible metal conduit or other raceway or cable systems, for installation in accordance with Article 362 of the National Electrical Code Section of the CEC, other applicable sections of the Code and local codes. 1.2 Any ENT used shall be listed to the requirements of UL Standard UL 1653 in accordance with Article 362 of the NEC and Section of the CEC. 1.3 Any ENT used shall meet the requirements of BI National Standard CAN/CSA-C22.2 No UL1653 and shall be Listed/Certified in accordance to the Electrical Codes. 1.4 Carlon s ENT shall be installed per the technical assessment prepared by fire cause analysis for use in 1-hour and 2-hour rated construction. 1.5 Penetration of fire-rated walls, floors or ceilings shall use Classified Through-Penetration Firestop Systems described in the current Underwriters Laboratories Fire Resistance Directory. 1.6 Fittings and outlet boxes designed for use with ENT shall be listed. All fittings, boxes and accessories shall be from one manufacturer. 1.7 Only Carlon ENT Blue cement recommended specifically for use with ENT and rigid non-metallic fittings shall be used. 1.8 Unless indicated differently on drawings, ENT systems shall be color coded: BLUE for branch and feeder circuit wiring, YELLOW for communications and RED for fire alarm and emergency systems, or colors can designate different voltages. 1.9 ENT, fittings and accessories shall be manufactured by Carlon. Carlon Electrical Non-Metallic Tubing (ENT) System A. Do not use chemical primer or cleaner. B. Use a brush to apply a light, uniform coat of cement labeled for use with ENT on the coupling and ENT. C. Do not use a dauber. D. Brush excess cement out of ENT grooves. E. Promptly insert ENT into fitting while cement is wet, until the stop is reached, and give a quarter turn. F. Do not disturb until joint is set. NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. Features: Recognized for use with PVC rigid non-metallic conduit fittings with all sizes of ENT ENT rated for 90 C conductors U.S., and 75 C Canada One-piece ENT Coupling, Threaded Terminator and RNC Transition Fitting are rated concrete tight without tape Recognized for use in 2-hour fire-resistive nonload-bearing and load-bearing wall assemblies Recognized for use in 1-hour fire-resistive nonload-bearing wall assemblies Recognized for use in a fire-resistive ceiling assembly (up to three hours) Recognized for Through-Penetration Firestop systems as classified by UL to meet ICC building codes. Conductors easily push through the raceway (up to approximately 50 feet)* For use in buildings in accordance with NEC Article 362/CEC Section Outside Diameters meet IPS Dimensions Storage -4 F to 158 F Handling -4 F to 104 F Continued on next page 29

32 Technical Information Carlon Electrical Non-Metallic Tubing (ENT) System Continued from previous page Approved Uses: Concrete slab NEC Article 362/CEC Section Walls wood stud, masonry and metal stud NEC Article 362/CEC Section Ceilings permanent or dropped (free air only) NEC Article 362/CEC Section Exposed NEC Article 362/CEC Section Public assembly NEC Section 518.4, in non-fire rated and certain fire rated structures Prewired NEC Article 362/CEC Section Classified by UL 1479 for Through Penetration Firestop Systems in UL Guide Category XHEZ and current UL Fire Resistance Directory Three-hour rated floor/ceiling assembly Raised floors NEC Section 645.5(E)(2) Exposed or concealed in building above three floors when a fire sprinkler system is installed in accordance with NFPA 13 NEC Section (2) For use in residential attics up to three feet above the bottom of the ceiling joist Maximum ambient temperature 140 F (60 C) Typical Applications: Residential: low or high rise multi or single family Commercial: low or high rise office, retail, hotel/motel, restaurant, etc. Nursing homes/hospitals in non-patient care areas only. Schools, classrooms, dormitories, offices Fire alarm systems Recreational vehicles and parks Solar photovoltaic systems Marinas and boatyards Other uses per the current NEC and CEC NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc. Carlon Innerduct Guide When Innerduct is being used inside the building Plenum Must be UL Listed Plenum cable must be installed Color: Industry-standard orange Pull tape pre-installed in sizes 1 2" through 3" General Purpose and Riser Must be UL Listed Riser-rated cable must be used in riser applications Color: Industry-standard orange carlon pyramid carlon pyramid CAt. NO. size (IN.) CAt. NO. size (IN.) CD4X1C 1 2 PLM100T 1 CE4X1C 3 4 PLM125T CF4X1C 1 PLM150T CG4X1C PLM200T 2 CH4X1C CJ4X1C 2 CL4X1C 3 CAt. NO. size (IN.) CAt. NO. size (IN.) DE4X1C 3 4 RIS100T 1 DF4X1C 1 RIS125T DG4X1C RIS150T DH4X1C RIS200T 2 DJ4X1C 2 DL4X1C 3 Note: HDPE innerduct will not meet code Specifying and installing UL Listed innerducts with the anticipation of future upgrades provides the building owner with a low-cost solution for the removal of abandoned cables. 30

33 Catalog Number Index Cat. No. PAGE NO. Cat. No. PAGE NO. Cat. No. PAGE NO. Cat. No. PAGE NO UPC AK AKC C R Y UPC AA C R Y C C R R Y Y Y R Y AKR AKY AAC AAR AAY A A200D...5 A200E...5 A200F...5 A210D...5 A210E...5 A210F...5 A220D...5 A220E...5 A220F...5 A220G...5 A220H...5 A220J...5 A230D...5 A230E...5 A230F...5 A A238DIV...9 A240D...10 A240E...10 A240F...10 A243D...10 A243E...10 A243F...10 A245D...8 A245E...8 A245F...8 A253D...10 A253E...10 A253F...10 A263D...8 A263E...8 A263F...8 A273DE...8 A273EF...8 A293DEF...7 A340F...24 A343F...24 A353F...24 A A A A A A A A A A470D...13 A A A52151D...11 A52151E...11 A52171D...11 A52171E...11 A5217DE...11 A521DE...11 A5329DE...12 A540DS...12 A58381D...11 A58381E...11 A615D...13 A615DE...13 A615DH...13 A615DJ...13 A615DL...13 A615E...13 A A862D...11 A862E...11 A863-4SQ...6 A863-4SQF...6 A863BC...6 A863CF...6 A863CFF...6 A863CFG...6 A863CFGF...6 A863D...6 A863DF...6 A863DG...6 A863DGF...6 A863MB...7 A863S...6 A863SF...6 A863SG...6 A863SGF...6 A864D...11 A864E...11 A864F...11 C861G...11 CC120B...14 CC CC CD4X1C...30 CD4X1C CD4X1C CD4X1C CE4X CE4X1-1000S...15 CE4X CE4X CE4X1-350S...16 CE4X1-350S...18 CE4X1C...30 CE4X1C CF4X1-100S...16 CF4X1-100S...18 CF4X CF4X CF4X1-250S...16 CF4X1-250S...18 CF4X1C...30 CF4X1C CF4X1C CF4X1C CF4X1C CF4X1C CF4X1C CF4X1C CF4X1C CF4X1C CF4X1C CG4X1-200S...16 CG4X1-200S...18 CG4X1-500S...15 CG4X1-900S...15 CG4X1C...30 CG4X1C CG4X1C CG4X1C CG4X1C CG4X1C CG4X1C CG4X1C CH4X1-150S...16 CH4X1-150S...18 CH4X1C...30 CH4X1C CH4X1C CH4X1C CH4X1C CH4X1C CJ4X1-100S...16 CJ4X1-100S...18 CJ4X1-200S...15 CJ4X1C...30 CJ4X1C CJ4X1C CJ4X1C CJ4X1C Carlon Electrical Non-Metallic Tubing (ENT) System 31

34 Catalog Number Index Carlon Electrical Non-Metallic Tubing (ENT) System Cat. No. PAGE NO. Cat. No. PAGE NO. Cat. No. PAGE NO. Cat. No. PAGE NO. CJ4X1C CJ4X1C CJ4X1C CL4X1C...30 CL4X1C DE4X DE4X1C...30 DF4X1C...30 DF4X1C DF4X1C DF4X1C DF4X1C-500R...17 DF4X1C DF4X1C DF4X1C DF4X1C DG4X1C...30 DG4X1C DG4X1C DG4X1C DG4X1C DG4X1C-500R...17 DG4X1C DG4X1C DG4X1C DH4X1C...30 DH4X1C DH4X1C DH4X1C DJ4X1C...30 DJ4X1C DJ4X1C DJ4X1C DL4X1C...30 DL4X1C E460R-CAR...13 E92CSH...14 E92CSJ...14 E92CSL...14 E92CSN...14 E92CSP...14 E92CSR...14 E940D...10 E940E...10 E940E...25 E940F...10 E940F...25 E940G...10 E940G...25 E940H...10 E940H...25 E940J...10 E940J...25 E943D...10 E943E...10 E943E...25 E943EW...25 E943F...10 E943F...25 E943FW...25 E943G...10 E943G...25 E943GW...25 E943H...10 E943H...25 E943HW...25 E943J...10 E943J...25 E943JW...25 HF4X4C HG4X4C HH4X4C HJ4X4C MGP08MT MGP08MT MGP08MT MGP08RMT...23 MGP12MT MGP12MT MGP12MT MGP12RMT...23 MGR08JT MGR08JT MGR08JT MGR08RJT...23 MGR12JT MGR12JT MGR12JT MGR12RJT...23 PLM100T...30 PLM100T PLM100T-250B PLM100T PLM100T PLM100T PLM125T...30 PLM125T PLM125T-250B PLM125T PLM125T PLM125T PLM150T...30 PLM150T PLM150T PLM200T...30 PLM200T RHF100T RHF125T RHF150T RHF200T RIS100T...30 RIS100T RIS125T...30 RIS125T RIS150T...30 RIS150T RIS200T...30 RIS200T SC100A...26 SC100ADJC...26 SC100SC...26 SC200A...26 SC200ADJC...26 SC200DV...26 SC300A...26 SCA240E...24 SCA240F...24 SCA243E...24 SCA243F...24 SCA253E...24 SCA253F...24 SCE940G...25 SCE940H...25 SCE940J...25 SCE943G...25 SCE943H...25 SCE943J...25 TL TL TL TL TL VC9961P...27 VC VC VC VC9981P...28 VC VC VC VC VC9LV VC9LV VC9LV

35 A Global Leader in Innovative... Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology