QUALIFICATION CODE QUALIFICATION TITLE TLI Certificate IV in Driving Operations
|
|
- Laura Stanley
- 5 years ago
- Views:
Transcription
1 CODE TITLE MODIFICATION HISTORY TLI42116 Certificate IV in Driving Operations Release 2.0. The following units have been added to the general elective units: TLIF0005 Apply a fatigue risk management system TLIF0006 Administer a fatigue risk management system. Imported units have been updated. Release 1.0 first release of this qualification. DESCRIPTION ENTRY REQUIREMENTS PACKAGING RULES This is a qualification for those engaged in driving operation job roles in the Transport and Logistics industry. It involves a broad range of skilled applications including requirements to evaluate and analyse current practices, to develop new criteria and procedures for performing current practices, and to provide leadership and guidance to others in applying skills and planning skill development. Job roles Job roles and titles vary across different sectors. Possible job titles relevant to this qualification include: Chemical tanker driver Fuel tanker driver Heavy recovery driver LP gas tanker driver. Successful achievement of the licensing unit in the qualification must align with licensing and regulatory requirements applicable to driving and state or territory regulatory requirements. There are no entry requirements for this qualification. A total of 12 units of competency comprising: 4 core units listed below plus 1 licensing/industry elective unit relevant to the type applicable to the job role from the licensing/industry elective units listed below plus Copyright Here Australian Industry Standards Page 1 of 6
2 All units within one of the specialist elective groups (job roles) from Group A, Group B, Group C or Group D listed below plus 5 general elective units from the general elective units listed below if selecting Group A, Group B or Group C or 6 general elective units from the general elective units listed below if selecting Group D. Up to 3 of the general elective units may be selected from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification. Where imported units are selected, care must be taken to ensure that all prerequisite units specified are complied with. The following units have prerequisite units: Core units CPCCSF2003A Cut and bend materials using oxy- LPG equipment TLIC0002 Operate fuel tanker TLIC0003 Operate LP gas tanker TLID4048 Top load a dangerous goods tanker TLID4049 Bottom load a dangerous goods tanker TLIF0001 TLIF2010 TLIF4066 TLIF4095 Apply chain of responsibility legislation, regulations and workplace procedures Apply fatigue management strategies Implement and supervise transport regulations compliance systems Apply work health and safety requirements for driving operations Licensing/Industry elective units TLIC1051 TLIC2002 TLIC3003 Operate commercial Drive light rigid Drive medium rigid Page 2 of 6 Australian Industry Standards Copyright Here
3 TLIC3004 TLIC3005 TLIC4006 TLILIC2014 TLILIC2015 TLILIC2016 TLILIC3017 TLILIC3018 Drive heavy rigid Drive heavy combination Drive multi-combination Licence to drive a light rigid Licence to drive a medium rigid Licence to drive a heavy rigid Licence to drive a heavy combination Licence to drive a multicombination Specialist elective units Select one group (job role) from the following options: Group A: Fuel Tanker Group B: LP Gas Tanker Group C: Chemical Tanker Group D: Heavy Recovery. Group A: Fuel Tanker TLIC0002 TLILIC0001 Operate fuel tanker Licence to transport dangerous goods by road Group B: LP Gas Tanker TLIC0003 TLILIC0001 Operate LP gas tanker Licence to transport dangerous goods by road Group C: Chemical Tanker TLIC0001 TLILIC0001 Operate chemical tanker Licence to transport dangerous goods by road Copyright Here Australian Industry Standards Page 3 of 6
4 Group D: Heavy Recovery TLIC4069 Operate heavy recovery General elective units AHCMOM213 AURVGA3002 CPCCOHS2001A CPCCSF2003A HLTWHS006 PUADEFVH001A PUADEFVH002A RIICBS312D TLIB2004 TLIC0001 TLIC0002 TLIC0003 TLIC4068 TLIC4070 TLID4048 TLID4049 TLID4050 TLIE1005 Operate and maintain chainsaws Recover s Apply OHS requirements, policies and procedures in the construction industry Cut and bend materials using oxy- LPG equipment Manage personal stressors in the work environment Conduct recovery operations in a field environment Extract disabled equipment using winching techniques in a field environment Conduct bitumen tanker operations Carry out inspection Operate chemical tanker Operate fuel tanker Operate LP gas tanker Operate heavy recovery ancillary equipment Tow a disabled heavy Top load a dangerous goods tanker Bottom load a dangerous goods tanker Discharge a dangerous goods tanker Carry out basic workplace calculations Page 4 of 6 Australian Industry Standards Copyright Here
5 TLIE3026 TLIE4025 TLIF0002 TLIF0005 TLIF0006 TLIF2018 TLIF3091 TLIF3096 TLIF4007 TLIF4065 TLIH2001 TLIH3002 TLIJ4010 TLIL4010 TLIL4079 TLILIC0012 Carry out advanced calculations in the transport and logistics industry Prepare and process transport documentation for dangerous goods Administer chain of responsibility policies and procedures Apply a fatigue risk management system Administer a fatigue risk management system Operate firefighting equipment Apply awareness of dangerous goods and hazardous materials requirements Carry out emergency response to a dangerous goods incident Implement and coordinate accident-emergency procedures Ensure compliance with Australian Dangerous Goods Code Interpret road maps and navigate pre-determined routes Plan and navigate routes Implement quality systems and procedures in a dangerous goods workplace Assess and confirm customer transport requirements Manage the recovery process Licence to operate a loading crane (capacity 10 metre tonnes and above) Copyright Here Australian Industry Standards Page 5 of 6
6 TLIU1009 Monitor plant and equipment in an environmentally sustainable manner MAPPING INFORMATION LINKS This qualification replaces but is not equivalent to TLI42111 Certificate IV in Driving Operations. TLI Transport and Logistics Training Package Companion Volume Implementation Guide at: Page 6 of 6 Australian Industry Standards Copyright Here
AUR32416 Certificate III in Automotive Refinishing Technology
AUR32416 Certificate III in Automotive Refinishing Technology Release 1 AUR32416 Certificate III in Automotive Refinishing Technology Modification History Release Release 1 Comment New qualification. Qualification
More informationAURTGA001 Drive and manoeuvre trailers
AURTGA001 Drive and manoeuvre trailers Release: 1 AURTGA001 Drive and manoeuvre trailers Modification History Release Release 1 Comment New unit of competency. Application This unit describes the performance
More informationLevel 5. Credits 85. Purpose. Special Notes
NZQF NQ Ref 0793 Version 4 Page 1 of 11 National Certificate in Driving (Education and Assessment) with optional strands in Light Motor Vehicle, Heavy Motor Vehicle, Motorcycle, and Off-road Vehicle Level
More informationNZQA registered unit standard version 1 Page 1 of 6
Page 1 of 6 Title Demonstrate knowledge of theory and legislation for registration of electrical appliance servicepersons Level 3 Credits 3 Purpose This unit standard covers the theory assessment required
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Drive a Taxi or Private Hire Vehicle in a Professional Manner K/602/6055 SQA Unit code FF97 66 History of changes Publication date: Version:
More informationA briefing for APSE Members. DRIVER CERTIFICATE OF COMPETENCE (DCPC) 2009 EU Directive 2003/59.
A briefing for APSE Members DRIVER CERTIFICATE OF COMPETENCE (DCPC) 2009 EU Directive 2003/59. The sector skills council for the Freight Logistics Industries Objectives of the Directive Improve Road Safety
More informationTLI Transport and Logistics Training Package. Companion Volume Implementation Guide - Range of Conditions Tables
TLI Transport and Logistics Training Package Release 1.0 Companion Volume Implementation Guide - Range of Conditions Tables Contents TLIC1013 Ride courier/delivery bicycle... 1 TLIC3003 Drive medium rigid
More informationGuidelines for Safety Training of Overhead Crane Operators and Supervisors
Guidelines for Safety Training of Overhead Crane Operators and Supervisors Purpose These guidelines present minimum recommended safety requirements for ensuring the safe and efficient operation of overhead
More informationConduct on-road training for motorcycle riders
Page 1 of 5 Conduct on-road training for motorcycle riders Level 5 Credits 10 Purpose This unit standard is for licensed motorcycle riding instructors who wish to conduct on-road motorcycle training. People
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate and apply knowledge of theory and practice for registration of electrical workers (stage 3) Level 4 Credits 3 Purpose This unit standard is for people who are completing an
More informationTraining & Licensing
Training & Licensing Short Course List - 2018 About Foresite Training Foresite Training is a nationally registered training organisation, delivering qualifications and accredited courses in Melbourne and
More informationNational Certificate in Passenger Service (Taxi Driver) Level 3. Credits 61. Purpose. Replacement Information. Special Notes
NZQF NQ Ref 1695 Version 1 Page 1 of 7 National Certificate in Passenger Service (Taxi Driver) Level 3 Credits 61 Purpose This qualification is for people who drive or intend to drive a taxi. The compulsory
More informationDriver CPC 4U National Transport Training
Our training modules are made up of 14 individual 3.5-hour courses which can be delivered with each other to make up a complete 7-hour session enabling training programmes to be tailored to the specific
More informationCredit gained for a standard may be used only once to meet the requirements of this qualification.
NZQF NQ Ref 0796 Version 4 Page 1 of 5 National Certificate in Driving (Light Motor Vehicle) Level 2 Credits 41 Purpose The National Certificate in Driving (Light Motor Vehicle) [Ref: 0796] is designed
More informationNGINEERING. Level 3 NVQ Diploma in. Mechanical Manufacturing Engineering. Qualification Specification. Issue 1.1
1 www.eal.org.uk Level 3 NVQ Diploma in NGINEERING Mechanical Manufacturing Engineering Qualification Specification Overview A qualification designed to cover the skills and knowledge of a wide variety
More informationService and operate a diesel-electric main line locomotive
Page 1 of 5 Service and operate a diesel-electric main line locomotive Level 3 Credits 5 Purpose People credited with this unit standard are able to: ensure diesel-electric main line locomotive is fit
More informationRSPO Principles and Criteria Lead Auditor Course.
RSPO Principles and Criteria Lead Auditor Course. INTRODUCTION. Held over a contiguous 5-day period, this course is intended for delegates who have the intention to become an RSPO P&C Lead Auditor (LA).
More informationDiagnose and rectify faults in a motorcycle electronic ignition system
Page 1 of 5 Diagnose and rectify faults in a motorcycle electronic ignition system Level 4 Credits 4 Purpose This unit standard is for people in the motorcycle and automotive electrical repair industries.
More informationService and operate an electric main line locomotive
Page 1 of 5 Service and operate an electric main line locomotive Level 3 Credits 5 Purpose People credited with this unit standard are able to: ensure electric main line locomotive is fit for purpose and
More informationThe Learning Outcomes are grouped into the following units:
Component Specification NFQ Level 4 Digital Tachograph Operation Skills 4N2326 1. Component Details Title Teideal as Gaeilge Award Type Code Digital Tachograph Operation Skills Scileanna Oibrithe Tacagraif
More informationRSPO Supply Chain Certification. OCTOBER 17-18, 2016
RSPO Supply Chain Certification. OCTOBER 17-18, 2016 Bidakara Hotel Jakarta Jl. Jend. Gatot Subroto Kav. 71-73, Pancoran, Daerah Khusus Ibukota Jakarta RSPO-endorsed RSPO Supply Chain Certification Lead
More informationRecover Light Vehicles Using Advanced Winching Techniques
IMIRR05 Recover Light Vehicles Using Advanced Winching Techniques Overview This standard is about recovering vehicles using advanced winching techniques. For the purpose of this standard light vehicles
More informationRHA The HGV Driver Road Haulage Association 30 November 2017
RHA The HGV Driver Road Haulage Association 30 November 2017 Heavy Goods Vehicle (HGV) Driver Is it the Job for YOU Lorry drivers are the glue that holds supply chains together. No container or truck or
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NQF Ref 1389 Version 3 Page 1 of 12 National Certificate in Electricity Supply (Line Mechanic Transmission) (Level 4) with optional strands in Optional Work Skills (E1 (O)), and Optional De-energised Work
More informationAutomotive Internship
Western Technical College 32404369 Automotive Internship Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 Total Hours 162 Student will be responsible
More informationLearning Exchange: Prospectus
Learning Exchange: Prospectus Table of Contents Learnerships... Short Courses... 4 Short Courses Professional Drivers... 10 1 Learnerships 5085 National Certificate: Professional Driving The purpose of
More informationNZQA Expiring unit standard 893 version 5 Page 1 of 5. Diagnose and rectify vehicle emission control system faults
Page 1 of 5 Title Diagnose and rectify vehicle emission control system faults Level 4 Credits 3 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationPeriodic Training. Maintaining high driving standards and improving road safety
Periodic Training All enquiries please call FTT Training Head Office Telephone: 08454 303 388 www.fttonline.com Maintaining high driving standards and improving road safety All About Periodic Training
More informationTHE ISSUE AND USE OF SECTION 10B PERMITS FOR ROAD PASSENGER TRANSPORT AND MINIBUS DRIVING IN NORTHERN IRELAND
This letter is for the attention of: (i) Section 10B permit issuers; (ii) Holders of Section 10B Permits; and (iii) Minibus drivers Tom Reid Director for Transport Strategy Room 301 Clarence Court 10-18
More informationCONTENTS ABOUT TPP TAI POUTINI POLYTECHNIC
DRIVER EDUCATION 2 CONTENTS About Tai Poutini Polytechnic Programmes Street Talk Defensive Driving Forklift OSH F Endorsement Dangerous Goods Endorsement Heavy Vehicles Fatigue & Logbook Management Class
More informationMINIBUS SAFETY POLICY STANDARD & PROCEDURES
MINIBUS SAFETY POLICY STANDARD & PROCEDURES This Policy Standard details the requirements placed on Colleges and Departments to ensure owned, leased and hired minibuses that are driven by staff, students
More informationALIGNING SKILLING AND LICENSING THE DISCONNECT BETWEEN A LICENCE AND COMPETENCE. Jillian Dielesen
ALIGNING SKILLING AND LICENSING THE DISCONNECT BETWEEN A LICENCE AND COMPETENCE Jillian Dielesen Licence, which includes both a theory test and a practical assessment. Passing a practical driving
More informationTransport by road overweight and overdimension loads that do not require a pilot or overdimension permit
Page 1 of 7 Transport by road overweight and overdimension loads that do not require a pilot or overdimension permit Level 4 Credits 9 Purpose This unit standard is for drivers who transport overweight
More informationLIFT TRUCK POLICY AND PROGRAM
LIFT TRUCK POLICY AND PROGRAM Table of Contents 1.0 Policy Statement and Program Overview... 4 2.0 Lift Truck Applicable Legislation, Guidelines and Standards... 4 3.0 Forklift Program Requirements...
More informationCICA HOIST SECTOR FAQs - RELEVANT STANDARDS / REGULATIONS. A. How do I find Australian Standards for cranes?
CICA HOIST SECTOR FAQs - RELEVANT STANDARDS / REGULATIONS A. How do I find Australian Standards for cranes? Summary: SAI Global is the publisher for Australian Standards, http://infostore.saiglobal.com/store/.
More informationCarry out a pre-delivery check, rectify defects, and complete the service on a light vehicle
Page 1 of 5 Carry out a pre-delivery check, rectify defects, and complete the service on a light vehicle Level 3 Credits 3 Purpose This unit standard is for people in the automotive service industries.
More informationNZQA Expiring unit standard 5441 version 5 Page 1 of 5
Page 1 of 5 Title Describe, diagnose, and rectify faults in tractor and agricultural machine final drive assemblies Level 4 Credits 6 Purpose This unit standard is for people in the automotive repair industry.
More informationNZQA Expiring unit standard version 2 Page 1 of 7. Check, remove, and refit wheels and tyres from heavy machines or equipment
Page 1 of 7 Title Check, remove, and refit wheels and tyres from heavy machines or equipment Level 4 Credits 10 Purpose This unit standard is for people in the heavy equipment and tyre repair industry.
More informationSUMMARY AND ANALYSIS: FMCSA Notice of Proposed Rule-Making (NPRM)
SUMMARY AND ANALYSIS: FMCSA Notice of Proposed Rule-Making (NPRM) Minimum Training Requirements for Entry-Level Commercial Motor Vehicle Operators Issued: March 7, 2016 PURPOSE To provide members of NYAPT
More informationModel Curriculum. Light Motor Vehicle Driver Level 3 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum Light Motor Vehicle Driver Level 3 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE ROAD TRANSPORTATION DRIVING ASC/Q9702 3 Light Motor Vehicle Driver Level -3 TABLE OF CONTENTS
More informationIMI ACCREDITATION ELECTRIC VEHICLE
ELECTRIC VEHICLE What is IMI Accreditation? IMI Accreditation is a practical, non-academic way to demonstrate individual capability, providing independent proof of current competence, knowledge and skills.
More informationNational Certificate in Motor Industry (Automotive Machining)
NZQF NQ Ref 0371 Version 6 Page 1 of 11 National Certificate in Motor Industry (Automotive Machining) Level 4 Credits 167 This qualification has been reviewed. The last date to meet the requirements is
More informationPSSPO103 Drive shore based vehicles
Overview This standard covers the competence required to drive shore based vehicles. It includes the operating of tractor units, light vehicles such as cars or vans and also heavy vehicles including excavators,
More informationProgram of Instruction Course Syllabus
Program of Instruction Course Syllabus Course Title: S-130 Basic Wildland Firefighter Training Course : 35 hours Program: Wildland Firefighting Course Prerequisites: S-190 Introduction to Wildland Fire
More informationPROCEDURE. Operative Date: 22/12/2016 Department: HSEC. Revision: Author: D Steel CONTENTS
Title: Cranes - Inspection and Maintenance PROCEDURE Procedure No: P314.422 Issue: 1 Revision: 0 Operative Date: 22/12/2016 Department: HSEC Sect./Classification: Safety / Gear & Equipment Author: D Steel
More informationSEMPEO SQA Unit Code H Carrying out routine servicing of mechanical equipment
Carrying out routine servicing of mechanical equipment Overview This standard covers a range of basic mechanical equipment servicing/scheduled maintenance competences, that will prepare you for entry into
More informationStripping and rebuilding motorsport engines (pre-competition)
Unit 060 Stripping and rebuilding motorsport engines Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to re-build
More informationPermit Type: Extended Drivers Hours of Service (Provincial)
Permit Type: Extended Drivers Hours of Service (Provincial) Under the provisions of Section 62 of the Alberta Traffic Safety Act, the Holder of this Permit is exempted from the requirements of sections
More informationMOTOR VEHICLE OPERATOR
MICHIGAN CIVIL SERVICE COMMISSION JOB SPECIFICATION MOTOR VEHICLE OPERATOR JOB DESCRIPTION Employees in this job operate or oversee the operation of vehicles such as automobiles, trucks, buses, ambulances,
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR -Module Number- 0074458 -Session-1987-88 -Superclass- XR -Title- COMPRESSION
More informationPOWERED INDUSTRIAL TRUCK PROGRAM September 2015
A. SCOPE AND APPLICATION POWERED INDUSTRIAL TRUCK PROGRAM September 2015 The Powered Industrial Truck Program is established in accordance with 29 CFR 1910.178, Powered Industrial Trucks, and describes
More informationNZQA registered unit standard 9076 version 4 Page 1 of 5
Page 1 of 5 Title Repair vehicle chassis damage Level 4 Credits 10 Purpose This unit standard is for people who work in the collision repair industry. People credited with this unit standard are able to
More informationNZQA Expiring unit standard 960 version 5 Page 1 of 5. Diagnose and rectify brake system faults on light vehicles
Page 1 of 5 Title Diagnose and rectify brake system faults on light vehicles Level 4 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationTLI Transport and Logistics Training Package. Companion Volume Implementation Guide - Range of Conditions Tables
TLI Transport and Logistics Training Package Release 2.0 Companion Volume Implementation Guide - Range of Conditions Tables Contents TLIC0001 Operate a chemical tanker... 3 TLIC0002 Operate a fuel tanker...
More informationNational Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair
NZQF NQ Ref 1252 Version 3 Page 1 of 12 National Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair Level 2 Credits 80 This
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2020.
NZQF NQ Ref 1117 Version 5 Page 1 of 7 National Certificate in Electricity Supply (Field Switcher) (Level 4) with optional strands in Distribution Networks, Transmission Networks, and Operational and Co-ordination
More informationNZQA registered unit standard version 1 Page 1 of 5. Apply and remove portable earths in an electricity supply system
Page 1 of 5 Title Apply and remove portable earths in an electricity supply system Level 4 Credits 7 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing and bonding
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1445 Version 2 Page 1 of 33 National Certificate in Motor Industry (Automotive Heavy Engineering) (Level 3) with strands in Agricultural Equipment, Materials Handling Equipment, Plant and Equipment,
More informationNational Certificate in Motor Industry (Automotive Servicing)
NZQF NQ Ref 0138 Version 4 Page 1 of 8 National Certificate in Motor Industry (Automotive Servicing) Level 2 Credits 67-68 This qualification has been reviewed. The last date to meet the requirements is
More informationVehicle Operation Procedure HSE
1 Purpose and Scope The Purpose of this Procedure is to prevent injury to personnel and damage to property through the safe operation of vehicles. This Vehicle Operation Procedure provides mandatory requirements
More informationVehicle Management Policy and Procedure Document No: VMPol 001
Vehicle Management Policy and Procedure Document No: VMPol 001 SHE Unit/March 2017 1 Safety, Health and Environment Unit Title Reference Number Vehicle Management Policy and Procedure VMPol 001 DOCUMENT
More informationUWA Electrical Safety Procedure
UWA Electrical Safety Procedure Who it applies to The requirements of WA legislation are applicable to academic personnel (e.g. lecturers and researchers), students of various levels, personnel that support
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines
Page 1 of 5 Title Demonstrate and apply knowledge of electrical machines Level 5 Credits 15 Purpose This unit standard covers knowledge and the application of d.c. and a.c. electrical machines for engineers.
More informationCollect and analyze data on motorcycle crashes, injuries, and fatalities;
November 2006 Highway Safety Program Guideline No. 3 Motorcycle Safety Each State, in cooperation with its political subdivisions and tribal governments and other parties as appropriate, should develop
More informationModel Curriculum. Solar Lighting Technician (Options: Home Lighting System/ Street Lights)
Model Curriculum Solar Lighting Technician (Options: Home Lighting System/ Street Lights) SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GREEN JOBS RENEWABLE ENERGY ASSEMBLY AND REPAIR SGJ/Q0201,
More informationUNIVERSITY OF ROCHESTER ENVIRONMENTAL HEALTH & SAFETY
Revision No.: New Page 1 of 11 I. PURPOSE Personal transportation via small and agile electric or gas powered vehicles is a convenience but also presents a unique set of hazards. This policy addresses
More informationLIST OF OPEN TRAINING TRAINING PLANNER 2016/2017 Course location: Lagos, Abuja, Port Harcourt.
JANUARY 2016 Credit Management and Collection of 4-6 11-15 14-27 Abuja/Lagos/PH 150,000 220,000 320,000 Receivables Developing Executive Management 4-6 11-15 14-27 Abuja/Lagos/PH 150,000 220,000 320,000
More informationYouth Guarantee Courses 2019 National Certificates at levels 2 and 3
EDUCATIONAL SERVICES LTD Driving your career forward Youth Guarantee Courses 019 National Certificates at levels and 3 Zero fees apply for all Youth Guarantee learners Open to learners 16-19 years Travel
More informationTHE PETROLEUM REGULATION ACTS (NI) 1929 & 1937
THE PETROLEUM REGULATION ACTS (NI) 1929 & 1937 APPLICATION FOR GRANT/RENEWAL/TRANSFER OF A PETROLEUM LICENCE Completed Applications to be sent to: Oifig an Iúir Newry Office Licensing Section Regulatory
More informationNational Certificate in Electricity Supply (Line Mechanic Distribution) (Level 4)
NZQF NQ Ref 0874 Version 6 Page 1 of 6 National Certificate in Electricity Supply (Line Mechanic Distribution) (Level 4) Level 4 Credits 118 This qualification is expiring. The last date to meet the requirements
More informationLand Transport Rule Traction Engines [2008]
Land Transport Rule Traction Engines [2008] Rule 63001 Overview Land Transport Rules are law produced by Land Transport New Zealand for the Minister of Transport. Land Transport NZ drafts Rules in plain
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Drive and manoeuvre a steam driven rail vehicle Level 4 Credits 10 Purpose This unit standard covers the knowledge and skills required to drive and manoeuvre steam driven rail vehicles,
More informationMedical Fitness to Drive assessment and the role of the Driving Mobility Centres in UK
Medical Fitness to Drive assessment and the role of the Driving Mobility Centres in UK Anu Varshney Consultant Practitioner/Head of Service Chairman Driving Mobility, UK South East DriveAbility, Kent Community
More informationecognition of Prior Learning (RPL)
ecognition of Prior Learning (RPL) EVIDENCE GUIDE FOR INSPECT AND LUBRICATE AN AUTOMOTIVE SYSTEM Evidence Guide inspect and lubricate an automotive system Page 1 of 15 National Certificate in Professional
More informationAUTOMOTIVE ELECTRICAL AND ELECTRONICS Service an automotive battery
1 of 5 level: 2 credit: 2 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry This unit standard is for people who wish to
More informationPolice Operations: Tachograph Equipment Inspection
Higher National Unit Specification General information for centres Unit code: F0N9 35 Unit purpose: This Unit is designed to enable candidates to analyse tachograph recording equipment and use the information
More informationFacts about DOT Audits
Are You Prepared for adot Audit? Today s Presenters Miranda Gervais DMO Client Services Manager J. J. Keller & Associates, Inc. Tory Much Sr. DMO Client Service Specialist J. J. Keller & Associates, Inc.
More informationUnit title: Tractor Operations and Attachments (SCQF level 5)
National Unit specification: general information Unit code: H28R 11 Superclass: SK Publication date: August 2012 Source: Scottish Qualifications Authority Version: 01 Summary This Unit develops the knowledge
More informationAerodrome Operating Procedures
Airside Driving Permit Scheme 1 Policy 1.1 Jersey Airport has a responsibility to regulate the management and control of surface vehicles operating on, or in the vicinity of the airside area of Jersey
More informationLevel 4. Credits 61. Purpose. Replacement Information
NQF Ref 1314 Version 1 Page 1 of 6 National Certificate in Electricity Supply (Metering Technician) (Level 4) with optional strands in Low Voltage Time of Use, and High Voltage Time of Use Level 4 Credits
More informationWAYNE COUNTY COMMUNITY COLLEGE DISTRICT MOTOR VEHICLE SAFETY POLICY
WAYNE COUNTY COMMUNITY COLLEGE DISTRICT MOTOR VEHICLE SAFETY POLICY 1. Policy Many employees operate company owned, leased, rental or personal vehicles as part of their jobs. Employees are expected to
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2020.
NZQF NQ Ref 1416 Version 3 Page 1 of 20 National Certificate in Motor Industry (Automotive Specialist Engineering) (Level 4) with strands in Automotive Heating, Ventilation, and Air Conditioning; Automotive
More informationSchool bus safety behaviours and responsibilities
4 School bus safety behaviours and responsibilities New Zealand has a very good school transport safety record. To maintain this record and minimise risks and hazards, everyone using school buses should
More informationPS 127 Abnormal / Indivisible Loads Policy
PS 127 Abnormal / Indivisible Loads Policy June 2017 Version 1.5 Statement of legislative compliance This document has been drafted to comply with the general and specific duties in the Equality Act 2010;
More informationAerial Operations. Name: Frank Ennist
DEPARTMENT OF FINANCIAL SERVICES Division of State Fire Marshal Bureau of Fire Standards & Training Title: Master Syllabus Date: October 3, 2017 Aerial Operations Course Title Aerial Apparatus Operations
More informationVehicle Systems and Technology
Unit 75: Vehicle Systems and Technology Unit code: D/601/1374 QCF level: 5 Credit value: 15 Aim This unit will develop learners understanding of the operating principles associated with advanced vehicle
More informationPROGRAM OUTLINE HEAVY EQUIPMENT TECHNICIAN PRE-EMPLOYMENT PROGRAM 504 HOURS 16 CREDITS
HEAVY EQUIPMENT TECHNICIAN PRE-EMPLOYMENT School of Trades Applied Science & Management Division 2011-2012 PROGRAM OUTLINE HEAVY EQUIPMENT TECHNICIAN PRE-EMPLOYMENT PROGRAM 504 HOURS 16 CREDITS PREPARED
More informationNortheast Autonomous and Connected Vehicle Summit
Northeast Autonomous and Connected Vehicle Summit June 12, 2018 Cathie Curtis, Director, Vehicle Programs AAMVA 1 1 Founded in 1933, the American Association of Motor Vehicle Administrators (AAMVA) represents
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Perform minor servicing tasks on a petrol fuel system
Page 1 of 5 Title Perform minor servicing tasks on a petrol fuel system Level 2 Credits 2 Purpose This unit standard is for people who wish to enter or are employed in the automotive repair industry. People
More informationNational Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans
NZQF NQ Ref 0413 Version 6 Page 1 of 13 National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans Level 4 Credits
More informationEnergy Regulation : Australian Experience. Engr.Khondkar Abdus Saleque
Energy Regulation : Australian Experience Engr.Khondkar Abdus Saleque 14/11/2014 Australian Energy Regulator Australia is a federal Country with Six Sates and two territories Victoria, NSW, Queensland,
More informationTerms of Reference (ToR) Trade & Traceability Standing Committee (T&T SC)
Terms of Reference (ToR) Trade & Traceability Standing Committee (T&T SC) Table of Contents 1 Introduction... 2 2 Mission, Mandate & Scope... 2 2.1 Working Group... 2 3 Structure... 3 3.1 Criteria for
More informationTechnical Test Theory Dump Truck - Articulated Chassis A56
1 a) Give ONE advantage and b) TWO disadvantages of rear-mounted cameras. 2 What is the purpose of a ROPS cab? 3 Give TWO reasons why the dump truck operator should have an understanding of the type of
More informationDRIVING & CITY VEHICLES January To identify some rules relevant to use of vehicles; and,
A. PURPOSE The purpose of Section is to: 1. Set Authorized Driver standards; 2. To identify some rules relevant to use of vehicles; and, 3. To comply with IRS laws regarding taxation of commuter use of
More information2015 IPWEA Queensland Conference Mackay. 14 th October 2015
2015 IPWEA Queensland Conference Mackay 14 th October 2015 Session 6c Driver Safety Safer Driving Can You afford not to be proactive? THINK Differently ACT Differently DRIVE Differently Presenter Stephen
More informationCAL STATE LA ELECTRIC CART SAFETY. Richard Brennan, Health & Safety Coordinator Risk Management & EHS Office
CAL STATE LA ELECTRIC CART SAFETY Richard Brennan, Health & Safety Coordinator Risk Management & EHS Office The Main Points Electric Carts: departmental authorization and training traffic laws restrictions
More informationInternational and European Shipping Policies and the Protection of the Marine Environment
International and European Shipping Policies and the Protection of the Marine Environment Actors and Regimes: an Overview Dr. Cornelia Ziehm 1 1. Shipping-Related Pressures and Risks shipping accidents
More informationMotor Vehicle Safety and Journey Management Document Number OHS-PROC-31. Rockhampton Office Brisbane Office Tarong Site
Business Procedure Motor Vehicle Safety and Journey Management Document Number OHS-PROC-31 This document applies to the following sites: All Sites Rockhampton Office Brisbane Office Tarong Site Barron
More informationNational Truck & Bus Driver Trainers Conference
National Truck & Bus Driver Trainers Conference ---- Neil Rowe Managing Director ProDrive -The Driver Trainers Ltd Angie Davies Consultant ProDrive The Driver Trainers Ltd Neil Rowe, Managing Director
More informationVehicle Parking, Isolation and Maintenance. Rockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS
Business Procedure Vehicle Parking, Isolation and Maintenance Document Number OHS-PROC-140 This document applies to the following site(s): Rockhampton Office Brisbane Office Tarong Site Barron Gorge Hydro
More information