AUTOMOTIVE GARAGE EQUIPMENT

Transcription

1 AUTOMOTIVE GARAGE EQUIPMENT KWA-300 3D technology wheel aligner for car LAUNCH The 3D Wheel Aligner with 4 digital cameras, targets without on-board electronic and premium PC with Windows XP operation system. Features: - Durable target - Passive target demanding no periodic calibration - Easy operation and maintenance due to no request for cable connection and battery charging - Convenient run out compensation procedure Precise Measurement - Stable light source - Dynamic compensation measurement - Real-time display of data makes the adjustment easier - Flexible measuring modes to give easy access for users of traditional wheel aligners User Friendly - Advanced 3D processing, mode identification and computer visual technology Perfect 3D model on the base of kinesiology, optical measurement and automotive technology. Technical specification Item Measurement Precision Measurement Precision Total toe-in ± ~±20 0 Camber ± ~±20 0 Caster ± ~±25 0 Kingpin inclination ± ~±25 0 Maximal wheelbase it can measure 4000mm 4*

2 To learn more about the HK Automotive Products line, visit GEOLINER 680 3D technology wheel aligner for car HOFMANN The 3D wheel aligners of the geoliner series use the latest camera and computer technologies for high accuracy and impressive speed. Features: - Windows XP operating system, custom vehicle specifications, regional specifications, splash screen selection, calibration history, backup / restore of calibration & setup data. Aligner system diagnostics & changeable readings in demo mode Vehicle specifications: years Multiple languages: - 26 total Operator efficiency: - Integrated help system (PDF format), 3D animations, tools, parts & adjustment instructions. Customer data entry advanced customer database, customer database backup / restore. Multiple clamp support, multiple print formats, multiple units of measure & multiple alignment wizards (including custom). User login, inspections & report; custom inspections, driver compliant diagnostics, A/I alignment diagnostics, roll forward & split positioning sequence. Equalize toe warning &adjust front before rear warning. Front caster -28 to +28 Front & rear camber -15 to +15 Wheel size Tire diameter Unlimited Tread width Wheel base Power requirement 240v/50Hz/1Ph Data transmission method CCD imaging technology *Prices and specifications are subject to change without prior notice. 5

3 AUTOMOTIVE GARAGE EQUIPMENT C1000 Imaging technology wheel aligner for car & truck HPA Wheel aligner with 8 digital cameras, targets without on-board electronic and premium PC with Windows XP operation system. Main and functional features: - Wheel aligner with 8 digital cameras, targets without on-board electronic and premium PC with Windows XP O/S. Measurement technology with two cameras for each target: the system recognizes targets of every dimension with highest accuracy. Targets manufactured with very high-resistance materials and that no need of maintenance and calibration. No need to adjust cameras height while using lifts: time saving to get more alignments per day. Two types of installation: on floor, with modular column, or wall-mounted. Wheeled cabinet for PC, printer and monitor storage and with wide working surface. After operations, targets can be easily hanged on both sides of the cabinet. Angle adjustment displayed in comprehensive coloured fields. Animations: adjustment procedures run with a step-by-step sequence, supported by animated video pages. Push-mode ROC and ROC skip possibility. Smart card technology for software and databank updating. Databank: about 20,000 vehicles to cover every market-area worldwide. Total toe ± 20 Thrust angle ± 10 Camber ± 10 Caster ± 30 King pin angle ± 30 Toe-out on turn at 20 ± 10 Front included angle ± 40 Power requirement 240v/50Hz/1Ph Work ambient temperature 0 15 C Noise level <70 db(a) 6*

4 To learn more about the HK Automotive Products line, visit C400 8-CCD wireless Four-Wheel Aligner for car & truck HPA Computerized Four-Wheel Alignment System with 8-Sensor CCD Technology Under Windows 4 wheel alignment machine. Main and functional features: - Data transmission method: radio & cable Protected compartment for PC and printer Wireless measuring heads equipped with a 2.4GHz FHSS multichannel radio system Built-in charges in the measuring heads, with battery in charge-position while hanged on the cabinet and during the cables are in use Computerised wheel aligner with 8x4 infrared CCD sensors Electronic leveling device displayed both on the control panel and on the screen during adjustment Quick control keyboard on the panel of measuring head LEDs to show the angle tolerance( traffic lights ) positioned at the end of each sensor arm, so visible once adjustment are performed from the pit or under the lifts User friendly software: intuitive and innovative, meeting the increasingly professional needs including customized requirements of car manufacturers Program for trucks and trailer available C400T Adjustments: Full data information displayed in friendly coloured fields Animations (optional): Step-by-step adjustment procedures with animated video Spoiler program for sport cars without using adapters Toe curve adjustment (optional): special dedicated procedures for VW, Mercedes, trucks and heavy duty vehicle Databank: About 20,000 vehicle to cover every market-area worldwide Run-Out-Compensation available in 3 versions: push-mode, 3-point and single wheel ROC assisted by encoder Smart-Card technology for software and data bank updating. Front & rear toe ± 48 Thrust angle ± 24 Rear steering angle ± 24 Front steering angle ± 60 Front & rear king pin angle ± 10 Front king pin angle and caster ± 30 Front included angle ± 40 Front axle deflection ± 24 Power requirement Weight 230V/50Hz/ 1Ph 125kg *Prices and specifications are subject to change without prior notice. 7

5 AUTOMOTIVE GARAGE EQUIPMENT UWA388 8-CCD sensors wireless Four-Wheel Aligner for car & light truck HKUNICO Computerized Four-Wheel Alignment System with 8-Sensor CCD Technology Under Windows 4 wheel alignment machine. Main and functional features: - Computerised wheel aligner with 8x4 wireless CCD sensors, which with high precision, strong resistance for environmental interference and good repetition; Built-in chargers in the measuring heads with battery; PC-Free measurement mode, which shows measurement results directly on the LCD and with the function even without power; Electronic leveling device displayed both on the LCD and on the screen during adjustment; Strength Bluetooth communication is stable and credible and also with long distance communication; User friendly software: Intuitive and innovative, meeting the increasingly professional needs including customized requirements of car manufacturers. LEDs to show the angle tolerances positioned at the end of each sensor arm, so visible once adjustment are performed from the pit or under the lifts. Animations (optional): Step-step adjustment procedures with animated video. Total toe ± 12 Thrust angle ± 10 Camber ± 10 Caster ± 20 King pin angle ± 20 Clamping capacity Power requirement 240V/50Hz/ 1Ph 8*

6 To learn more about the HK Automotive Products line, visit UWA-G88 8-CCD sensors wireless Four-Wheel Aligner for car & light truck HKUNICO Computerized Four-Wheel Alignment System with 8-Sensor CCD Technology Under Windows 4 wheel alignment machine. Main features: - Eight camera CCD technology provides instantaneous 360 degree measuring of toe-in, camber, caster, steering axle inclination (SAI),setback, thrust angle, wheelbase difference and track width difference, etc. Geometric centre-line and thrust measuring principle ensures perfect measuring and adjustment results. 2.4GHz high-frequency wireless Zigbee communication mode with merits of low energy consumption, great transmission capacity and reliable transmission stability. Dedicated wireless network under Window platform, free networking. Extendable ports for devices such as remote measuring system, PDA and simulator, etc. Periodically updated database containing over 20,000 latest domestic and overseas vehicle data with easy fuzzy query function. Environment adaptive designed optical measuring system adapts to maximum working environment even in sun-exposed alignment bay. Multi-language audio play, 3D animation navigation and built-in professional training course combining with simulator guides even less experienced technicians quickly and easily through the measuring process. Spoiler mode allows technicians to tilt the sensor head up or down to measure small rim vehicle or super-low chassis vehicle (No spoiler adapter needed). Total toe ± 12 Thrust angle ± 10 Camber ± 10 Caster ± 20 King pin angle ± 20 Clamping capacity Power requirement 240V/50Hz/ 1Ph Standard accessories: - *Prices and specifications are subject to change without prior notice. 9