INDEX. -"Leva la Leva" car tyre changers "Traditional" car tyre changers Wheel balancers Wheel alignments...

Transcription

1 Catalogue

2

3 INDEX PAGE TYRE CHANGERS -"Leva la Leva" car tyre changers "Traditional" car tyre changers WHEEL BALANCERS -Wheel balancers WHEEL ALIGNMENTS -Wheel alignments LIFTING EQUIPMENTS -Lifting equipment

4 2057 mm. Artiglio UNIFORMITY "Leva la leva" CAR TYRE CHANGERS Universal automatic tyre changer with diagnostic functions Automatic diagnostic tyre changer with leva la leva technology for car, SUV and commercial vehicle wheels up to 32. Apart from the usual tyre demounting and mounting operations, it also carries out a complete diagnosis of the individual wheel (up to 28 ) and/or the entire wheel set of the vehicle, analysing the geometry with and without a load and simulating on-road behaviour. It suggests the best tyre-rim coupling (MATCH-MOUNTING) to improve the driver s comfort and safety. WHEEL DIAGNOSIS Presser roller with variable load, for measuring radial and lateral force variation enables to perform structural analysis of the wheels 22" monitor included powered system 1200 mm (47 ) Multi-function command console fitted with NAVISYSTEM for highspeed, intuitive navigation in the various wheel diagnosis menus Tyre Changers 12" 32 Uniformity 14" 28" The laser triangulator enables geometric measurement of the rim and tyre Dynamic bead-breaking device with dual opposed bead-breaker discs. The radial positioning of the discs is automatic. Kg. 85 Integrated fully articulated lifter with 85 Kg max. load capacity wheel weight Special high-precision centring and clamping kit for every type of wheel Kit WDK Netto Kg. 541 x5 x10 x2 x3 x5 x2 x mm mm. Artiglio UNIFORMITY V / 1Ph / 50-60Hz Cod

5 Artiglio MASTERCODE"Leva la leva" CAR TYRE CHANGERS Universal automatic tyre changer The machine has 4 automated work cycles to make procedures increasingly fast, simple and absolutely safe for integrity of the rim and the tyre. MASTER CODE is compatible with all tyre types, from Run Flat-UHP tyres to both small and large balloon tyres. Wheel data self-acquisition and automatic work. Automatic tool positioning for manual cycle procedure wizards. Interactive multifunctional TFT-LCD TOUCH SCREEN interface with microprocessor control. USB port for software databases update, and for loading files and videos. Playback capability for demonstration videos, scheduled maintenance reminder, self-diagnosis, sensor state check and fault indication. Camera active during automatic work cycle 1200 mm (47 ) SMART CORGHI SYSTEM demounting procedure minimised tyre stress absolutely NO contact with rim!!! automated, synchronised tyre demounting and mounting Integrated fully articulated lifter with 85 Kg max. load capacity 10" 32 Kg. 85 Freely adjustable mobile control console. Simple, quick and intuitive controls wheel weight 595 Kg x3 x2 x3 x1 Kit WDK x mm x mm 2500 mm ARTIGLIO MASTER CODE 230/115V - 1Ph - 50/60Hz Moto-inverter 2V Cod

6 Artiglio MASTER 26 "Leva la leva" CAR TYRE CHANGERS Universal automatic tyre changer Display allowing electronic setting of the rim diameter with positioning of all working tools, reading of the pressure inside the tyre during the inflation cycle, and selection of the PAX system working procedure. 360 mm (14 ) 1100 mm (43 ) Integrated pneumatically operated wheel lift for easy positioning of the wheel on the turntable with absolutely no operator effort Kg. 65 wheel weight Control console subdivided into three separate working areas, for more immediate movement recognition, and easier use by the operator. The integrated pneumatic presse facilitates bead release from the tool by tilting the tyre. Net Kg. 450 Kit WDK x mm mm mm. Standard accessories (Always supplied) Artiglio MASTER V - 3Ph - 50Hz Cod

7 Artiglio MASTER JOLLY "Leva la leva" CAR TYRE CHANGERS Automatic tyre changer Tyre changer with "Leva la Leva" technology for passenger car, SUV and light transport vehicle wheels. Exclusive Smart Corghi system with electronic wheel diameter preselection and automatic demounting/mounting tool and bead breaker disc positioning. Complete with wheel lift, pneumatic bead presser and van wheel kit. 360 mm (14 ) 1100 mm (43 ) Bead depressor with adjustable working height. Depressor shape ideal for RFT tyres. Standard in all versions. 12" 26 Axial mounting turntable allows quick, secure wheel clamping and bead breaking on both sides with no need to turn the wheel over (wheel is clamped on the machine just once). Kg. 85 Integrated pneumatically operated wheel lift for easy positioning of the wheel on the turntable. wheel weight Ergonomic and multifunctional consoles with a display that makes it possible to electronically set the rim diameter and obtain the positioning of the work tools in a quick, practical and safe manner. Divided into three distinct work areas, it makes it easier to immediately recognize movements and makes the system easier to use for the operator. Kit WDK Net Kg. 400 (T.I.=Kg. 415) x3 x3 x mm. x mm mm. Artiglio MASTER JOLLY 230V-1Ph - 50/60Hz Moto-inverter 2V Cod Artiglio M.JOLLY AUTOMATIC 230V-1Ph - 50/60Hz Moto-inverter 2V Cod

8 Artiglio 500 "Leva la leva" CAR TYRE CHANGERS Automatic tyre changer 380 mm (15 ) Automatic tyre changer with 2nd generation Leva la leva (leverless) technology 1200 mm (47 ) 12" 32 The multifunctional control console contains all the operating controls. Ideal for dynamic bead breaking and for rim and tyre match mounting, thanks to the two dual control discs. Kg. 85 wheel weight Dynamic bead breaking device with dual specular bead breaker disc. The radial positioning of the discs is made easier by automation that prevents any manual positioning errors by the operator. Wheel lifter included Kit WDK Net Kg. 380 x5 x10 x mm x mm 1700 mm. Artiglio V - 1Ph - 50H Cod

9 Artiglio 50 "Leva la leva" CAR TYRE CHANGERS Automatic tyre changer 380 mm (15 ) Pneumatically operated sideswing to locate the arm on the underside of the tyre mm (47 ) 12 Bead breaking unit with automatic single arm featuring 180 tilting (Patent Pending): quick, accurate, repetitive bead breaking on both sides of tyre. 30 Control unit Kg. 85 wheel weight Adjustable grease ring Axial mounting turntable allows quick, secure wheel clamping and bead breaking on both sides with no need to turn the wheel over (wheel is clamped on the machine just once). Kit WDK Net/Netto Kg. 310 x5 x10 x2??? cm. x mm mm. Artiglio V - 1Ph - 50/60Hz Cod

10 A 2025 LL "Leva la leva" CAR TYRE CHANGERS Automatic tyre changer 360 mm (14 ) Telescopic horizontal arm for rapid positioning of the head in relation to the rim Automatic tyre changer with pneumatic tilting column 1100 mm (43 ) 12 26" Sliding supports with interchangeable clamping zones Outside clamping range New turntable system with two pneumatic cylinders capable of clamping any type of rim securely Bead breaker shoe extension system useful for working on large diameter wheels installed on the machine as standard Inside clamping range Net Kg. 259 x5 x10 x2 x4 x mm. x mm mm. A 2025 LL 230V - 1Ph - 50Hz Cod

11 A 2030 MI "Traditional" CAR TYRE CHANGERS Automatic tyre changer 360 mm (14 ) Automatic tyre changer with pneumatic tilting column 1100 mm (43 ) Telescopic horizontal arm for rapid positioning of the head in relation to the rim 12 26" Outside clamping range New turntable system with two pneumatic cylinders capable of clamping any type of rim securely Dual-position telescopic bead breaker support for breaking the beads of wheels up to a maximum width of 14" Inside clamping range x5 x10 Net Kg. 259 x6 x4 x mm mm mm. A 2030 MI 2V TI other models A V - 1Ph - 50Hz Cod

12 A 224 "Traditional" CAR TYRE CHANGERS Automatic tyre changer 360 mm (14 ) 1100 mm (43 ) Automatic tyre changer with pneumatic tilting column Telescopic horizontal arm for rapid positioning of the head in relation to the rim 12 Simultaneous pneumatic locking of the horizontal arm and head carrier vertical arm with automatic positioning of the latter to ideal working position Outside clamping range Turntable with two pneumatic cylinders capable of clamping any types of rim securely Dual-position telescopic bead breaker support for breaking the beads of wheels up to a maximum width of 14 Inside clamping range x5 x10 x4 x4 Net Kg.250 x mm mm. Max overall dim 1050 mm. A 224 TI_SP V - 1Ph - 50Hz Cod

13 Eye Light Plus WHEEL BALANCERS Diagnostic wheel balancer for cars and light weight trucks Space-saving wheel casing (patent pending) with automatic opening at end of spin. Designed to allow positioning of the wheel balancer against the wall and to accommodate wheels with diameter of up to 44 (1118 mm). Standard 22" Monitor TOUCH 600 mm (23,6") mm (44") Contactless system for dimensions measurement Hight precision laser sensors automatically measure all dimensions of the wheel in a few seconds during the measurement cycle Rear splash guard with slots for additional accessories. 32 Kg. 75 wheel weight WM-Weight management Special programme collection including LESS WEIGHT which reduces work times (20%) and the amount of counterweights used (30%) Automatic wheel clamping. New electromechanical system which reduces working times and increases centring precision. Ipos (intelligent positioning). Special diagnostic tool for the vehicle wheel set monitoring: -Tread wear-drift angles-run-out unbalance. Once all the wheels have been stored, eyelight proposes their optimal placement on the vehicle for maximum comfort and safety. Net Kg TOUCHSCREEN Ø ,5 mm x3 for WiNut version 1860 mm mm. 894 mm. EyeLight Plus DiagnosticLine 110/230V - 1Ph - 50/60Hz Cod

14 EM 9980C Plus WHEEL BALANCERS Wheel balancer with touchscreen monitor, for cars and light weight trucks Space-saving wheel casing (patent pending). Designed to allow positioning of the wheel balancer against the wall and to accommodate wheels with diameter of up to 44 (1118 mm). Standard 22" Monitor Touch Touchscreen interface. The graphical interface and touchscreen technology simplify and speed up operations and work programme selection. 600 mm (23,6") 1118 mm (44") Contactless system for dimensions measurement Hight precision laser sensors automatically measure all dimensions of the wheel in a few seconds during the measurement cycle WM-Weight management Special programme collection including LESS WEIGHT which reduces work times and the amount of counterweights used (standard) Kg. 75 wheel weight Automatic wheel clamping. New electromechanical system which reduces working times and increases centring precision. Rear splash guard with slots for additional accessories. Net Kg Ø ,5 mm x mm. for WiNut version EM 9980C Plus DiagnosticLine 110/230V - 1Ph - 50/60Hz Cod mm. 894 mm.

15 EM 9580C Plus WHEEL BALANCERS Electronic wheel balancer with 22" Wide monitor Space saving wheel guard (patent pending) designed to allow the positioning along the wall, it also permits to hold wheels up to 44 (1.118 mm) maximum diameter 600 mm (23,6") 22" Wide Monitor mm (44") Weight tray ergonomic and functional, it features many large trays to house all different types of counterweights and the various tools. NaviSystem AWD automatic sensor (Auto width Device) for contactless measurement of wheel width 28 Controls and menu navigation are quick and easy. Just a click to directly access each programme Kg. 75 wheel weight EM9580 Manual wheel clamping Automatic wheel clamping. New electromechanical system which reduces working times and increases centring precision. New digital gauge for acquisition of diameter and distance. Maximum precision and smoothness with integrated FSP (Fast Selection Program) function which automatically activates the balancing programmes, avoiding keypad selection Ø ,5 mm EM9580C / EM9580 EM9580C for WiNut version Net Kg. 140 x3 EM mm mm. 894 mm. EM 9580C Plus Laser Line 110/230V - 1Ph - 50/60Hz Cod

16 EM 9550C Plus WHEEL BALANCERS Electronic wheel balancer with display Space saving wheel guard (patent pending) designed to allow the positioning along the wall, it also permits to hold wheels up to 44 (1.118 mm) maximum diameter Display Panel - Control unit including backlit display with high-definition graphics and touch-sensitive keypad with tactile dome keys. 600 mm (23,6") mm (44") Weight tray ergonomic and functional, it features many large trays to house all different types of counterweights and the various tools. NaviSystem AWD automatic sensor (Auto Width Device) for contactless measurement of wheel width 28 Kg. 75 Inclined front part to improve operator access to the inside of the rim wheel weight EM9550 Manual wheel clamping Automatic wheel clamping. New electromechanical system which reduces working times and increases centring precision. New digital gauge for acquisition of diameter and distance. Maximum precision and smoothness with integrated FSP (Fast Selection Program) function which automatically activates the balancing programmes, avoiding keypad selection Ø ,5 mm EM9550C / EM9550 EM9550C Net Kg. 145 x3 EM mm mm. 894 mm. EM 9550C Plus Laser Line 110/230V - 1Ph - 50/60Hz Cod

17 EM 9280 WHEEL BALANCERS Electronic wheel balancer with monitor 23,6" (600 mm) 19" Monitor AWD automatic sensor (Auto width Device) for contactless measurement of wheel width (optional) 44" (1118 mm) New digital gauge for acquisition of diameter and distance. Maximum precision and smoothness with integrated FSP (Fast Selection Program) function which automatically activates the balancing programmes, avoiding keypad selection Kg. 75 wheel weight PL50 Monitor and PL50 not included! FSP OPT OPT RPA AUTOMATIC POSITIONING ELECTRICAL BRAKE SMART ARM WHEEL DIMENSION DETECTION AWC Auto Width Calculation WM WEIGHT MANAGEMENT PROGRAMME AWD - Auto width device LED ILLUMINATOR and laser STANDARD OPTIONAL Net Kg. 75 Ø ,5 mm x mm mm. 583 mm. EM 9280 CompactLine 200/230V - 1Ph - 50/60Hz Cod

18 EM 9250 WHEEL BALANCERS Electronic wheel balancer with display 23,6" (600 mm) A double display control panel enables a quick and intuitive selection of the balancing mode and immediate access to the most common operating functions. 44" (1118 mm) The spin unit was originally used on superior models and provides precision and functionality characteristics typical of the higher range of wheel balancers. The innovative drive and zero maintenance ensure maximum reliability. Kg. 75 wheel weight Plus Version Model MODELL RPA! FSP SMART ARM OPT OPT OPT OPT AUTOMATIC POSITIONING ELECTRICAL BRAKE WHEEL DIMENSION DETECTION AWC Auto Width Calculation ELECTRONIC WIDTH SENSOR BRAKE AWD - Auto width device LED ILLUMINATOR and laser pedal brake PlUS VERSION TOP VERSION STANDARD OPTIONAL Net Kg. 75 Ø ,5 mm x mm mm. 583 mm. EM 9250 CompactLine 200/230V - 1Ph - 50/60Hz Cod

19 Exact Black Tech X Plus WHEEL ALIGNMENTS Camera wheel aligner with automatic camera rotation 8 high resolution digital cameras Automatic camera rotation Comprehensive screen with live graphics for reading parameters in real time Exact wheel alignment software Professional wheel alignment programme that includes all functions required by wheel aligning professionals. Customisable procedure, adjustment help animations, Asa Network. Always updated and full vehicle specs. Database selection with models Blacktag. Built with high resistant materials. Additional sun filters. Net Kg. 189 L x P x H 1250x810x1730 EXACT BLACK TECH X PLUS 110/230V - 1Ph - 50/60Hz Cod

20 Exact 7000 WHEEL ALIGNMENTS Computerised wheel aligner with 8-CCD Professional lcd monitor stan d: reliable, ergonomic, universal. Large worksurface,easy navigation thanks to 102-key keyboard, optic mouse and remote control as standard equipment. PROFESSIONAL CLAMP/SENSOR HEAD supports, removable for mounting on a wall or lift. Roomy internal storage space Maximum measurement accuracy and stability. Professional PC. High-strength wheels keep their shape for smooth running. CCD4- MODEL SENSOR HEADS: CCD sensor heads in wireless version on 2,4GHz industrial radio frequency. Net Kg. 186 L x P x H 1350x1320x1710 EXACT 7000 Plus II 110/230V - 1Ph - 50/60Hz Cod

21 ERCO 3222N N LIFTING EQUIPMENTS Electro-mechanical two post lifts Nut in nylon for a better durability. 2 motors (one for each column), controlled by an electronic card for controlling the drive synchronism of the two columns. Electric safety device which arrests the lift in case of excessive supporting lead nut wear. Ergonomic, compact electrical board. Telescopic arms. TECHNICAL DATA Erco 3222 Erco 4022 load capacity 3200 kg 4000 kg Long arm: min.-max mm mm Short arm: min.-max mm mm Adjustable pads mm Motor power 2 x 3.6 kw ERCO 3222N CEL 400V - 3Ph - 50/60Hz Cod ERCO 4022N CEL 400V - 3Ph - 50/60Hz Cod

22 ERCO H H5002 Series LIFTING EQUIPMENTS Two-column electro-hydraulic lifts Column with an asymmetric structure designed to make easier the opening of the doors Lift operated by a master/ slave type hydraulic circuit with automatic realignment of the two trolleys at each lifting cycle. 3 times telescopic arms TECHNICAL DATA Erco 4004 Erco 5004 load capacity 4000 kg 5000 kg useful height 1880/1940 mm 1895/1950/2050 mm Adjustable pads 80/140 mm 95/150/250 mm Distance between columns 2680 mm 3100 mm height 3870/4470/5070 Motor power 2.6 kw ERCO H4002 N 230/400V - 3Ph - 50/60Hz Cod ERCO H5002 N 230/400V - 3Ph - 50/60Hz Cod

23 ERCO Series LIFTING EQUIPMENTS Four-column electro-hydraulic lifts 4 electromagnets ensure security Distance of 2950 mm between the post: compatible with 3D wheel aligners. Front recesses for turntable (optional) Runways adjustable from 840 to 940 mm. Rear slip plates (optional) TECHNICAL DATA Erco H4002 Erco H5002 load capacity 4000 kg 5000 kg Min. useful height useful height Runway max. size 5060x x630 Motor power 2.6 kw ERCO 4004 W 230/400-3Ph - 50/60Hz Cod ERCO 5004 CT / CT LT 230/400-3Ph - 50/60Hz Cod

24 ERCO X X4300 Series LIFTING EQUIPMENTS Scissor type electro-hidraulic lifts Rear slip plates (optional) Front recesses for turntable (optional) The control electronics fearure an ALPHANUMERIC DISPLAY allowing access to a number of user functions, including viewing lift height fron ground and setting the desired arrest height for the lift. Plastic sliding pads To enable the wheel alignment cycle, the lift parking racks are adjustable; the electronics control whether the runways lift parking racks are enganged on the same teeth. TECHNICAL DATA Erco X4300 Erco X5000 load capacity 4300 kg 5000 kg Runway length 4650 mm 5200 mm Runway width 630 mm Distance between runways mm Pneumatic power supply 4-10 bar Motor power 3 kw capacity LT 3500 kg ERCO X4300 CT / CT LT V - 3Ph - 50/60Hz Cod ERCO X5000 CT / CT LT V - 3Ph - 50/60Hz Cod

25 ERCO Series LIFTING EQUIPMENTS Low profile dual scissor lifts Alternative: hydraulic master/slave circuit (two cylinders per runway) for total safety without the need for mechanical lock. Runway with slide-out extension for precise length adjustment or pending extensions Hydraulic lift equipped with a pneumatic locking system High strength pins with maintenance-free bearings Plastic sliding pads TECHNICAL DATA Erco 630 Erco 635 Erco 640 load capacity 3000 kg 3500 kg 4000 kg lifting height on floor 2000 mm lifting height in ground 1900 mm Minimum height of lift 105 mm 115 mm 115 mm1 Lenght of the lift 1590 mm 1590 mm 1580 mm Width of the lift 2060 mm Width of platforms 630 mm ERCO 630 / 635 / V - 1Ph - 50/60Hz / 400V - 3Ph - 50/60Hz Cod

26 NOTES

27 NOTES

28 NEXION SPA - ITALY - Società unipersonale soggetta a direzione e Description coordinamento Electrical supply di Minio srl - A sole shareholder Minio company Reference Volvo cars - info@corghi.com 28 by Marketing Div. - Cod. DPCG000852A_02_2018