Limit, micro and foot switches K series

Transcription

1 imit, micro and foot switches K series

2 Prewired limit switches limit switches with high degree of protection, IP67. 2m long wire Axial rotation of operating heads Adjustable and capsizable levers Fixing compatible to EN Direct opening operation Micro switches Micro switches for general use, with reinforced resin housing. Changeover contact switch rated 15A 250VAC 3 types of termination available Foot switches The new VAT Electric K series foot switches are used to control machinery and other equipment, leaving the operator s hands free to do other functions. The sturdiness of the metal and plastic body and the wide range of the available versions provide the proper solution for each control need. pen and with cover types and plastic body types

3 imit switches It is easier and quicker to detect the position of moving parts and safely install machinery due to the new concepts represented by the ovato Electric K series limit switches. Dimensions to EN standards (KB-KM types) Dimensions compatible to EN standards (KC-KN types) KB-KC plastic and KM-KN metal types Bayonet fixing mechanism Modularity of common parts Quick installation Adjustment ease Bi-directional types available All metal self-contained interchangeable heads. The operating heads are extremely robust metal parts. Mounting both on metal or plastic bodies for all cable entry types. Separate component supply for flexible stock management. Maximum installation speed. The bayonet fixing mechanism provides quick positioning of the operating head on the body with no special tools. 45 axial rotation of operating head. The heads have axial rotation of 45 angles. 360 lever adjustment. The rotating lever position is fully adjustable at 15 angles. Removable auxiliary contacts. The switch body can contain all the types of auxiliary contacts. Combinations of two (all series) or three (for KB and KM types only) contacts are possible with snap action or slow break function. Maximum cabling ease. The complete removal of the body cover and of the auxiliary contacts, supplied with open terminal screws, simplify electric cabling and reduce installation time.

4 imit switches - Bottom entry - KB type - KM type Dimensions to EN M CABE ENTRY. For types with PG13.5 cable entry, add the letter P at the end of the order code. E.g. KB A1 S11P Bottom entry Top push plunger Top roller push plunger Roller centre push lever Body plunger 1N+1NC Snap action ➊ KB A1 S11 KB B1 S11 KB B2 S11 KB C1 S11 KM A1 S11 KM B1 S11 KM B2 S11 KM C1 S11 2NC Snap action ➊ KB A1 S02 KB B1 S02 KB B2 S02 KB C1 S02 KM A1 S02 KM B1 S02 KM B2 S02 KM C1 S02 Slow break-make 1N+1NC before break ➊ KB A1 A11 KM A1 A11 KB B1 A11 KM B1 A11 KB B2 A11 KM B2 A11 KB C1 A11 KM C1 A11 1N+1NC Slow break ➊ KB A1 11 KB B1 11 KB B2 11 KB C1 11 KM A1 11 KM B1 11 KM B2 11 KM C1 11 KB A1 02 KB B1 02 KB B2 02 KB C1 02 KM A1 02 KM B1 02 KM B2 02 KM C1 02 2N Slow break ➊ KB A1 KB B1 KB B2 KB C1 KM A1 KM B1 KM B2 KM C1 1N+ KB A1 12 KB B1 12 KB B2 12 KB C1 12 KM A1 12 KM B1 12 KM B2 12 KM C1 12 2N+1NC Slow break ➊ KB A1 21 KB B1 21 KB B2 21 KB C1 21 KM A1 21 KM B1 21 KM B2 21 KM C1 21 3NC Slow break ➊ KB A1 03 KB B1 03 KB B2 03 KB C1 03 KM A1 03 KM B1 03 KM B2 03 KM C1 03 2NC Independent ➊ BI-DIRECTINA ➊ Direct opening operation ; safety function according to IEC/EN Ø19x5mm. ➌ Ø50x10mm. ➍ Ø50x10mm, offset alignment. KB C2 S11 KM C2 S11 KB C2 S02 KM C2 S02 KB C2 A11 KM C2 A11 KB C2 11 KM C2 11 KB C2 02 KM C2 02 KB C2 KM C2 KB C2 12 KM C2 12 KB C2 21 KM C2 21 KB C2 03 KM C2 03 Safety switches - Bottom and side entry - and metal types Dimensions to EN standards (KB and KM) Dimensions compatible to EN (KC and KN) Ø14x5mm KB D1 S11 KM D1 S11 KB D1 S02 KM D1 S02 KB D1 A11 KM D1 A11 KB D1 11 KM D1 11 KB D1 02 KM D1 02 KB D1 KM D1 KB D1 12 KM D1 12 KB D1 21 KM D1 21 KB D1 03 KM D1 03 Roller side push lever KB D2 S11 KM D2 S11 KB D2 S02 KM D2 S02 KB D2 A11 KM D2 A11 KB D2 11 KM D2 11 KB D2 02 KM D2 02 KB D2 KM D2 KB D2 12 KM D2 12 KB D2 21 KM D2 21 KB D2 03 KM D2 03 M CABE ENTRY. For types with PG13.5 cable entry, add the letter P at the end of the order code. E.g. KB P1 11P (bottom entry) KC P1 11P (side entry) Bottom and side entry Body 1N+1NC Slow break ➊ 1N+ 2N+1NC Slow break ➊ 3NC Slow break ➊ Short cylinder KB P1 11 KM P1 11 KB P1 02 KM P1 02 KB P1 12 KM P1 12 KB P1 21 KM P1 21 KB P1 03 KM P1 03 ong solid shaft KB P2 11 KM P2 11 KB P2 02 KM P2 02 KB P2 12 KM P2 12 KB P2 21 KM P2 21 KB P2 03 KM P2 03 ➊ Direct opening operation ; safety function according to IEC/EN Hinge operating bottom entry Slotted lever bottom entry Hinge operating side entry Slotted lever bottom entry ong solid shaft with reduction KB P3 11 KM P3 11 KB P3 02 KM P3 02 KB P3 12 KM P3 12 KB P3 21 KM P3 21 KB P3 03 KM P3 03 Prewired metal limit switches - KP type IP67 protection degree, 2m cable (both switch and cable cuus) Dimensions compatible to EN Slotted lever KB Q1 11 KM Q1 11 KB Q1 02 KM Q1 02 KB Q1 12 KM Q1 12 KB Q1 21 KM Q1 21 KB Q1 03 KM Q1 03 Short cylinder KC P1 11 KN P1 11 KC P1 02 KN P1 02 ong solid shaft KC P2 11 KN P2 11 KC P2 02 KN P2 02 ong solid shaft with reduction KC P3 11 KN P3 11 KC P3 02 KN P3 02 Slotted lever KC Q1 11 KN Q1 11 KC Q1 02 KN Q1 02 Bottom entry Quantity per package: 1 Wire : 2m (5x0.75mm 2 /5xAWG18) 1N+1NC Snap action ➊ 1N+1NC Slow break ➊ plunger KP A1 S11 KP A1 11 Top push plunger M12 fixing head, metal plunger KP A2 S11 KP A2 11 roller KP B1 S11 KP B1 11 Top roller push plunger roller 90 KP B2 S11 KP B3 S11 KP B2 11 KP B KP B4 S11 KP B4 11 ➊ Direct opening operation ; safety function according to IEC/EN Cable: 5 cores, each 0.75mm 2 /5xAWG18. For prewired switches with 1m long wire only, add suffix 010 at the end of the order code; supplied on specific request only.

5 roller KB E1 S11 KM E1 S11 KB E1 S02 KM E1 S02 KB E1 A11 KM E1 A11 KB E1 11 KM E1 11 KB E1 02 KM E1 02 KB E1 KM E1 KB E1 12 KM E1 12 KB E1 21 KM E1 21 KB E1 03 KM E1 03 KB E1 D02 KM E1 D02 Roller lever plunger roller KB E2 S11 KM E2 S11 KB E2 S02 KM E2 S02 KB E2 A11 KM E2 A11 KB E2 11 KM E2 11 KB E2 02 KM E2 02 KB E2 KM E2 KB E2 12 KM E2 12 KB E2 21 KM E2 21 KB E2 03 KM E2 03 ➌ KB E3 S11 KM E3 S11 KB E3 S02 KM E3 S02 KB E3 A11 KM E3 A11 KB E3 11 KM E3 11 KB E3 02 KM E3 02 KB E3 KM E3 KB E3 12 KM E3 12 KB E3 21 KM E3 21 KB E3 03 KM E3 03 roller KB F1 S11 KM F1 S11 KB F1 S02 KM F1 S02 KB F1 A11 KM F1 A11 KB F1 11 KM F1 11 KB F1 02 KM F1 02 KB F1 KM F1 KB F1 12 KM F1 12 KB F1 21 KM F1 21 KB F1 03 KM F1 03 KB F1 D02 KM F1 D02 Adjustable roller lever roller KB F2 S11 KM F2 S11 KB F2 S02 KM F2 S02 KB F2 A11 KM F2 A11 KB F2 11 KM F2 11 KB F2 02 KM F2 02 KB F2 KM F2 KB F2 12 KM F2 12 KB F2 21 KM F2 21 KB F2 03 KM F2 03 ➌ KB F3 S11 KM F3 S11 KB F3 S02 KM F3 S02 KB F3 A11 KM F3 A11 KB F3 11 KM F3 11 KB F3 02 KM F3 02 KB F3 KM F3 KB F3 12 KM F3 12 KB F3 21 KM F3 21 KB F3 03 KM F3 03 ➍ KB F4 S11 KM F4 S11 KB F4 S02 KM F4 S02 KB F4 A11 KM F4 A11 KB F4 11 KM F4 11 KB F4 02 KM F4 02 KB F4 KM F4 KB F4 12 KM F4 12 KB F4 21 KM F4 21 KB F4 03 KM F4 03 Ceramic lever Ceramic KB H1 S11 KM H1 S11 KB H1 S02 KM H1 S02 KB H1 A11 KM H1 A11 KB H1 11 KM H1 11 KB H1 02 KM H1 02 KB H1 KM H1 KB H1 12 KM H1 12 KB H1 21 KM H1 21 KB H1 03 KM H1 03 Adjustable lever KB 1 S11 KM 1 S11 KB 1 S02 KM 1 S02 KB 1 A11 KM 1 A11 KB 1 11 KM 1 11 KB 1 02 KM 1 02 KB 1 KM 1 KB 1 12 KM 1 12 KB 1 21 KM 1 21 KB 1 03 KM 1 03 KB 1 D02 KM 1 D02 KB 2 S11 KM 2 S11 KB 2 S02 KM 2 S02 KB 2 A11 KM 2 A11 KB 2 11 KM 2 11 KB 2 02 KM 2 02 KB 2 KM 2 KB 2 12 KM 2 12 KB 2 21 KM 2 21 KB 2 03 KM 2 03 KB 2 D02 KM 2 D02 mnidirectional wobble stick Flexible KB M1 S11 KM M1 S11 KB M1 S02 KM M1 S02 KB M1 A11 KM M1 A11 KB M1 11 KM M1 11 KB M1 02 KM M1 02 KB M1 KM M1 KB M1 12 KM M1 12 KB M1 21 KM M1 21 KB M1 03 KM M1 03 Semi-rigid KB M2 S11 KM M2 S11 KB M2 S02 KM M2 S02 KB M2 A11 KM M2 A11 KB M2 11 KM M2 11 KB M2 02 KM M2 02 KB M2 KM M2 KB M2 12 KM M2 12 KB M2 21 KM M2 21 KB M2 03 KM M2 03 Accessories and spare parts M CABE ENTRY. For types with PG13.5 cable entry, add the letter P at the end of the order code. E.g. KB N1 11P (bottom entry) KC N1 11P (side entry) Bottom and side entry body only Entry 1N+1NC Slow break ➊ Bottom Side Bottom Side 1N+ Bottom Straight key KB N1 11 KC N1 11 KB N1 02 KC N1 02 KB N1 12 Angled key KB N2 11 KC N2 11 KB N2 02 KC N2 02 KB N2 12 Key operated Straight T key KB N3 11 KC N3 11 KB N3 02 KC N3 02 KB N3 12 Angled T key KB N4 11 KC N4 11 KB N4 02 KC N4 02 KB N4 12 Extra keys KX N1 KX N2 rder Description code KX N3 Straight key KX N1 Angled key KX N2 KX N4 Straight T key KX N3 2N+1NC Slow break ➊ Bottom 3NC Slow break ➊ Bottom KB N1 21 KB N1 03 KB N2 21 KB N2 03 KB N3 21 KB N3 03 KB N4 21 KB N4 03 Angled T key Toggle key KX N4 KX N5 KX N5 ➊ Direct opening operation ; safety function according to IEC/EN The key is standard supplied. roller KP B5 S11 KP B5 11 M12 head top roller push plunger roller KP B6 S11 KP B KP B7 S11 KP B KP B8 S11 KP B8 11 Roller lever plunger Ø14x4.5mm KP E1 S11 KP E1 11 Ø14x4.5mm KP E2 S11 KP E2 11 Adjustable roller lever Ø18x5.5mm KP F1 S11 KP F1 11 Adjustable lever KP 2 S11 KP 2 11 mnidirectional wobble stick KP M2 S11

6 imit switches - Side entry - KC type - KN type Dimensions compatible to EN M CABE ENTRY. For types with PG13.5 cable entry, add the letter P at the end of the order code. E.g. KC A1 S11P Side entry Body 1N+1NC Snap action ➊ 2NC Snap action ➊ Slow break-make 1N+1NC before break ➊ 1N+1NC Slow break ➊ 2N Slow break ➊ 2NC Independent ➊ BI-DIRECTINA Top push plunger plunger KC A1 S11 KN A1 S11 KC A1 S02 KN A1 S02 KC A1 A11 KN A1 A11 KC A1 11 KN A1 11 KC A1 02 KN A1 02 KC A1 KN A1 Top roller push plunger KC B1 S11 KN B1 S11 KC B1 S02 KN B1 S02 KC B1 A11 KN B1 A11 KC B1 11 KN B1 11 KC B1 02 KN B1 02 KC B1 KN B1 KC B2 S11 KN B2 S11 KC B2 S02 KN B2 S02 KC B2 A11 KN B2 A11 KC B2 11 KN B2 11 KC B2 02 KN B2 02 KC B2 KN B2 ➊ Direct opening operation ; safety function according to IEC/EN Ø19x5mm. ➌ Ø50x10mm. ➍ Ø50x10mm, offset alignment. Roller centre push lever KC C1 S11 KN C1 S11 KC C1 S02 KN C1 S02 KC C1 A11 KN C1 A11 KC C1 11 KN C1 11 KC C1 02 KN C1 02 KC C1 KN C1 KC C2 S11 KN C2 S11 KC C2 S02 KN C2 S02 KC C2 A11 KN C2 A11 KC C2 11 KN C2 11 KC C2 02 KN C2 02 KC C2 KN C2 Ø14x5mm KC D1 S11 KN D1 S11 KC D1 S02 KN D1 S02 KC D1 A11 KN D1 A11 KC D1 11 KN D1 11 KC D1 02 KN D1 02 KC D1 KN D1 Roller side push lever KC D2 S11 KN D2 S11 KC D2 S02 KN D2 S02 KC D2 A11 KN D2 A11 KC D2 11 KN D2 11 KC D2 02 KN D2 02 KC D2 KN D2 Bottom and side entry Body 1N+1NC Snap action ➊ 2NC Snap action ➊ Slow break-make 1N+1NC before break ➊ 1N+1NC Slow break ➊ 2N Slow break ➊ 1N+ 2N+1NC Slow break ➊ 3NC Slow break ➊ Bottom entry Side entry KX CB S11 KX CM S11 KX CB S02 KX CM S02 KX CB A11 KX CM A11 KX CB 11 KX CM 11 KX CB 02 KX CM 02 KX CB KX CM KX CB 12 KX CM 12 KX CB 21 KX CM 21 KX CB 03 KX CM 03 KX CC S11 KX CN S11 KX CC S02 KX CN S02 KX CC A11 KX CN A11 KX CC 11 KX CN 11 KX CC 02 KX CN 02 KX CC KX CN ➊ Direct opening operation ; safety function according to IEC/EN Not suitable for key operated KBN / KCN, hinge operating KBP / KMP / KCP / KNP and slotted lever KBQ / KMQ / KCQ / KNQ types. ➌ nly for KB and KM types. Micro switches - KS type Auxiliary contact blocks 1N+1NC Snap action ➊ 2NC Snap action ➊ Slow break, make 1N+1NC before break ➊ 1N+1NC Slow break ➊ 2N Slow break 1N+ ➌ 2N+1NC Slow break ➊ ➌ 3NC Slow break ➊ ➌ Accessories 0 Description M cable gland PG13.5 cable gland M rubber grommet KX B S11 KX B S02 KX B A11 KX B 11 KX B 02 KX B KX B 12 KX B 21 KX B 03 KX P01 KX P02 KX P03 nly for KB and KM types perating heads Description Top push plunger top roller push plunger top roller push plunger roller centre push lever roller centre push lever roller side push lever roller side push lever roller lever plunger roller lever plunger Rubber Ø50x10mm roller lever plunger Adjustable lever Ø19x5mm Adjustable lever Ø19x5mm Adjustable rubber Ø50x10mm roller lever Adj. offset rubber Ø50x10mm roller lever Ceramic lever Adjustable plastic lever Adjustable metal lever Flexible wobble stick Semirigid wobble stick KX A A1 KX A B1 KX A B2 KX A C1 KX A C2 KX A D1 KX A D2 KX A E1 KX A E2 KX A E3 KX A F1 KX A F2 KX A F3 KX A F4 KX A H1 KX A 1 KX A 2 KX A M1 KX A M2 Bottom entry Quantity per package: 10 body only Changeover contact switch; N, NC, CMMN Terminals Solder Screw Faston Pin KS A1 S KS A1 V KS A1 F Top push - plunger High plunger KS A2 S KS A2 V KS A2 F ow plunger KS A3 S KS A3 V KS A3 F M12 fixing head KS A4 S KS A4 V KS A4 F Push button Hand operation KS A9 S KS A9 V KS A9 F Top roller push plunger M12 fixing head KS B1 S KS B1 V KS B1 F M12 fixing head, 90 roller KS B2 S KS B2 V KS B2 F

7 roller KC E1 S11 KN E1 S11 KC E1 S02 KN E1 S02 KC E1 A11 KN E1 A11 KC E1 11 KN E1 11 KC E1 02 KN E1 02 KC E1 KN E1 KC E1 D02 KN E1 D02 Roller lever plunger roller KC E2 S11 KN E2 S11 KC E2 S02 KN E2 S02 KC E2 A11 KN E2 A11 KC E2 11 KN E2 11 KC E2 02 KN E2 02 KC E2 KN E2 ➌ KC E3 S11 KN E3 S11 KC E3 S02 KN E3 S02 KC E3 A11 KN E3 A11 KC E3 11 KN E3 11 KC E3 02 KN E3 02 KC E3 KN E3 roller KC F1 S11 KN F1 S11 KC F1 S02 KN F1 S02 KC F1 A11 KN F1 A11 KC F1 11 KN F1 11 KC F1 02 KN F1 02 KC F1 KN F1 Adjustable roller lever roller KC F2 S11 KN F2 S11 KC F2 S02 KN F2 S02 KC F2 A11 KN F2 A11 KC F2 11 KN F2 11 KC F2 02 KN F2 02 KC F2 KN F2 ➌ KC F3 S11 KN F3 S11 KC F3 S02 KN F3 S02 KC F3 A11 KN F3 A11 KC F3 11 KN F3 11 KC F3 02 KN F3 02 KC F3 KN F3 ➍ KC F4 S11 KN F4 S11 KC F4 S02 KN F4 S02 KC F4 A11 KN F4 A11 KC F4 11 KN F4 11 KC F4 02 KN F4 02 KC F4 KN F4 Ceramic lever Ceramic KC H1 S11 KN H1 S11 KC H1 S02 KN H1 S02 KC H1 A11 KN H1 A11 KC H1 11 KN H1 11 KC H1 02 KN H1 02 KC H1 KN H1 Adjustable lever KC 1 S11 KN 1 S11 KC 1 S02 KN 1 S02 KC 1 A11 KN 1 A11 KC 1 11 KN 1 11 KC 1 02 KN 1 02 KC 1 KN 1 KC 2 S11 KN 2 S11 KC 2 S02 KN 2 S02 KC 2 A11 KN 2 A11 KC 2 11 KN 2 11 KC 2 02 KN 2 02 KC 2 KN 2 mnidirectional wobble stick Flexible KC M1 S11 KN M1 S11 KC M1 S02 KN M1 S02 KC M1 A11 KN M1 A11 KC M1 11 KN M1 11 KC M1 02 KN M1 02 KC M1 KN M1 Semi-rigid KC M2 S11 KN M2 S11 KC M2 S02 KN M2 S02 KC M2 A11 KN M2 A11 KC M2 11 KN M2 11 KC M2 02 KN M2 02 KC M2 KN M2 Technical characteristics KB, KC, KM and KN types PERATINA CHARACTERISTICS Maximum operating rate: 3600 cycles/h Mechanical life: >10 million cycles perating temperature: C Storage temperature: C Pollution degree: 3 (suitable for dirty ambient). : Conventional thermal current Ith: 10A IEC/EN designation: - A600 Q600 for KB and KC types - A0 Q0 for KM and KN types Rated insulation voltage Ui: - 690VAC for KB and KC types - 440VAC for KM and KN types Rated impulse withstand voltage Uimp: - 6kV for KB and KC types - 4kV for KM and KN types Contact resistance: <10m. Body housing: Degree of protection: IP65 KB and KC types: self-extinguishing double insulation polymer thermoplastic KM and KN types: aluminium-zinc alloy (zama) Body fixing tightening torque: 2.5 Nm Cable entry: M standard supply; PG 13.5 available (add the letter P at the end of the order code). CERTIFICATINS AND CMPIANCE Certifications obtained: cuus, GST. Compliant with standards: EN 50047, IEC/EN , IEC/EN , IEC/EN 604-1, EN KP type PERATINA CHARACTERISTICS Maximum operating rate: 3600 cycles/h Switching time: m/s Mechanical life: >10 million cycles perating temperature: C Storage temperature: C Pollution degree: 3 (suitable for dirty ambient). : Convetional thermal current Ith: 5A IEC/EN designation: B0 R0 Rated insulation voltage Ui: 400VAC Rated impulse withstand voltage Uimp: 4kV Contact resistance: <28m. Body housing: Class I insulation Degree of protection: IP67 Aluminium-zinc alloy (zama). CERTIFICATINS AND CMPIANCE Certifications obtained: cuus. Compliant with standards: IEC/EN , IEC/EN KS type PERATINA CHARACTERISTICS Maximum operating rate: 240 cycles/min Switching time: m/s Mechanical life: million cycles perating temperature: C. Storage temperature: C : Conventional thermal current Ith: 15A IEC/EN designation: A600-P0 Rating: AC15 240VAC 6,3A Rated insulation voltage Ui: 250VAC Contact resistance: <15m. Heads: perators of aluminium-zinc alloy (zama). Body housing: Polymer thermoplastic. Degree of protection terminals: IP00 or IP with terminal shroud CERTIFICATINS AND CMPIANCE Certifications obtained: c us. Compliant with standards: IEC/EN , IEC/EN mm, KS C1 S KS C1 V KS C1 F Roller centre push lever 48.5mm, KS C2 S KS C2 V KS C2 F 38mm, KS C3 S KS C3 V KS C3 F ne-way roller lever KS C9 S KS C9 V KS C9 F 63mm, KS 1 S KS 1 V KS 1 F Flat lever 54mm, KS 2 S KS 2 V KS 2 F 168.3mm, KS 3 S KS 3 V KS 3 F Accessories Terminal shroud Terminal shroud with grommet KSS C1 KSS CB2

8 Foot switches - KR KG type - KG KR type KG1 - KR1 KG2 - KR2 ne pedal foot switches Quantity per package: 1 1N+1NC Snap action ➊ 1N+1NC Slow break ➊ 2N+2NC Snap action ➊ 2-stage 2N+2NC snap action ➊ Body With free actuation KG1 00 S11 KR1 00 S11 KG KR PEN MDE With safety lever KG1 10 S11 KR1 10 S11 KG KR ➊ Direct operating operation ; safety function according to IEC/EN With pedal actuator lock KG1 S11 KR1 S11 KG1 11 KR1 11 With free actuation KG2 00 S11 KR2 00 S11 KG KR WITH CVER MDE With safety lever KG2 10 S11 KR2 10 S11 KG KR KG2 10 S KR2 10 S With pedal actuator lock KG2 S11 KR2 S11 KG2 11 KR2 11 With two-stage safety lever KG2 11 S KR2 11 S KGD KGD 002 KRD KRD 002 KGD KRG 004 KRD KRD 004 Two pedal foot switches Quantity per package: 1 WITH CVER MDE EFT PEN - RIGHT WITH CVER MDE With safety lever on both pedals Body 1N+1NC Snap action ➊ KGD 001 KRD 001 2N+2NC Snap action ➊ KGD 002 KRD 002 1N+1NC Snap action ➊ (left) 2N+2NC Snap action ➊ (right) ➊ Direct opening operation ; safety function according to IEC/EN eft pedal with free actuation and right pedal with safety lever KGD 003 KRD 003 KGD 004 KRD 004 Foot switches - Dimensions [mm] G M 86 KG1 34 KGD KG M KGR KG M Accessories 0 Description M cable gland PG13.5 cable gland M rubber grommet KX P... KX P01 KX P02 KX P03 KR1 KR M M Technical characteristics GENERA CHARACTERISTICS Thermoplastic or metal version are available. The plastic or metal body gives adequate robustness to the foot switch, for installation in all ambient and application conditions. Versions complete with or without pedal protection cover. The cover assures protection against accidental foot switch operation, due to sudden tool or heavy material dropping or other shock or vibration. Versions with safety lever. The safety mechanism prevents unintentional foot switch activation and excludes the pedal to be pressed if the operator s foot is not completely in place. Stable pedal base. The foot switch is equipped with rubber feet and metal-reinforced base for a firm and non-sliding position and a more reliable and safe activation. PERATINA CHARACTERISTICS Mechanical life: >10 million cycles Conventional thermal current Ith: 10A IEC/EN designation: - A600 Q600 for KG types - A0 Q0 for KR types Rated insulation voltage Ui: - 690VAC for KG types - 440VAC for KR types Rated impulse withstand voltage Uimp: - 6kV for KG types - 4kV for KR types Class II insulation (KG types only) Contact resistance: <10m Degree of protection: - IP for terminals - IP54 for body housing - IP65 available on request (add the letter S at the end of the order code. E.g. KG1 00 S11S) Housing: - KG types: self-extinguishing double insulation polymer thermoplastic - KR types: aluminium-zinc alloy perating temperature: C Storage temperature: C Cable entry: M standard supplied; PG13.5 available. See the note below for details. M CABE ENTRY. For types with PG13.5 cable entry, add the letter P at the end of the order code. E.g. KG1 00 S11P. CERTIFICATINS AND CMPIANCE Certifications obtained: c us(contacts only). Compliant with standards: IEC/EN , IEC/EN , IEC/EN 604-1, EN292, EN

9 imit switches - Dimensions [mm] Bottom entry Side entry () () Ø11 (40) M 50 M 60 KX CB KX CM KX CC KX CN K A1 K B1 - K B Ø Ø Ø19 54 Ø50x K C1 - K C2 K D1 - K D2 K E1 - K E2 K E Ø50x Ø50x Ø10 K F1 - K F2 K F3 K F4 KB H1 KM H1 imit switches - Dimensions [mm] Ø12 External Ø8 Internal Ø3.3.6 K P Ø K P Ø8 Ø6 Ø8 121 K 1 - K 2 K M1 - K M2 K N1 - K N2 K P3 K Q1 Prewired metal limit switches - Dimensions [mm] M12x M12x1 16 KP KP A1 KP A2 KP B1 - B2 KP B3 - B4 KP B5 - B M12x max KP B7 - B8 KP E1 - E2 KP F1 KP 2 KP M2.2 Micro switches - Dimensions [mm] Ø2.3 KS A1 KS A2 KS A3 KS A4 KS A KS B1 R Ø9.5x4 M12xT1 Ø12.5x KS B R63.5 M12 29 Ø12.5x3.8 Ø5.2 Ø R26.6 KS C1.7 R Ø7.15 Ø9.5x KS C2 R Ø9.5x M12xT1 Ø R38 KS C3 17 max Ø9.5x KS C9 KS 1 KS 2 KS 3

10 EARTH EAKAGE REA 1 1, 0, 2 0,2 2, autorese man rese tx1 tx I nx I nx0, I nx1 F AT INE AUTMATICTRANSFER TCH SWI CNTRE I nscaesetin autorese tx1 I nx I nx1 FUNCTI autorese man rese tx1 tx I nx I nx0, I nx1 I nx0, man rese tx 0, 0, 0, 0, 0,0 0,0 0, autorese man rese tx1 tx I nx I nx0, I nx1 R1 WI THDRAW WI THDRAW TRI TRI A A01W BATERY VTAG A04INE 2SWI TCH FAU A02HI GH BATERY VTAG A05INE PHASE SEQ 1WRNG A03INE 1SWI TCH FAU A06INE PHASE SEQ 2WRNG INE A07ADNT PWERED ṪU A08GENERATR NT READ A09EMERGENCY ST 2 F CN V 50/60Hz F RESE MA AU TES AAR TES GA H F INE SWI TCH CNTRE BC 12V= -3 24V= I CHARGE PWER 2-240V~ 50-60Hz AARM UT N H FF 0 PWER N CHARGE WI THDRAW WI THDRAW TRI TRI A A01W BATERY VTAG A04INE 2SWI TCH FAU A02HI GH BATERY VTAG A05INE PHASE SEQ 1WRNG A03INE 1SWI TCH FAU A06INE 2WRNG PHASE SEQ A07ADNT PWERED ṪU A08GENERATR NT READ A09EMERGENCY ST BATTERY F + ENT MN BATERY VTAG BATERY BW FUSE BATERY CNECTE NT BATERY PARI TY INVERTE N BATTERY I STP FUSE 6,3A F RESE MA AU TES AAR TES RUN 09 PANET Switch Motor protection circuit breakers Switch disconnectors Contactors Motor protection relays Electromechanical starters Switch disconnectors from 16 to 1250A Control and signalling units imit, micro and foot switches Rotary cam switches Contactors Signal towers and beacons T7 and B6 types Digital metering mulrimeter DMG series PANET PANET Din TRI I n(a t (sec (7) TEST RESET I nx0, I nx I nx1 Modular contactor A (7) A (8) ogic H H AUTMATIC BATTERY CHARGED AARM W Modular contactors Time relays Protection relays evel control relays Earth leakage relays Metering instruments and current transformers Soft starters AC motor drives Automatic power factor controllers Automatic battery chargers Automatic transfer switch controllers The pucts described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value. In addition, pucts should be installed and used by qualified personnel and in compliance with the regulations in force for electrical systems in order to avoid damages and safety hazards. Programmable logic relays Automatic transfer switch controller AT 10 type R M AUTMATICTRANSFER Switching power supplies Engine and generator controllers Switching power supplies PS series 100% electricity VAT EECTRIC S.P.A. CNTR SUTINS FR INDUSTRY VIA DN E. MAZZA, GRE (BERGAM) ITAY Tel Fax info@ovatoelectric.com Sales Department: Tel Fax VAT Electric offices in the world United Kingdom VAT (UK) TD Tel atvia VAT-REZ TD Tel Germany DETEC VAT GmbH Tel USA VAT EECTRIC INC Tel Spain VAT EECTRIC S.. Tel Canada VAT EECTRIC CRPRATIN Tel Poland VAT EECTRIC SP. Z.. Tel Mexico VAT EECTRIC DE MEXIC, S.A. DE C.V. Tel Czech Republic VAT S.R.. Tel Hong Kong - China VAT ASIA (HK) Tel PD42 GB 12 08