AQC source capture equipment. Fume Arms. Superior technology generating substantial operating savings

Transcription

1 Q source capture equipment Fume rms uperior technology generating substantial operating savings

2 Leading-dge, High-Performance ompany he Q Dust ollecting ystems division manufactures a full range of safe, industrial dust collectors, as well as dust and smoke capture equipment at the leading edge of air pollution control technologies based on more than 30 years experience in the field. ypical acquisition and operating dust collection equipment costs Q s strength lies in its innovative products designed and developed to generate substantial savings throughout their entire operating life. Q is renowned for its technological innovation, safe and sophisticated equipment design, as well as its robust and precise product manufacturing. For example, the unique design of the baffles inside Q dust collectors makes filter cleaning easy. he Q cartridge holder design provides maximum filter surface and enhanced filter performance. he ultra-smooth concept inside Q fume arms makes them maintenance-free. n short, Q equipment is designed and built to generate substantial operating savings in terms of time, money and energy. his translates to major reductions in operating costs from 10 to 20% throughout the equipment s service life. his scale of savings can represent a significant portion of the equipment s total purchase price. ompanies looking to maximize their profitability should factor in these savings when purchasing equipment. he unique design and manufacturing of Q equipment generates significant savings for various reasons: ubstantial increase in the duration of filters. Lower energy consumption during years of use. ignificantly less maintenance (easy to clean, robust manufacturing, a minimum number of more reliable and durable parts). educed operating costs (less frequent overhauls, lack of or minimum down time, etc.). Lower administrative costs (coordination, follow-ups, supervision) due to much less frequent breakdowns. afe design can prevent serious or even fatal accidents. ncreased comfort and productivity of personnel. quipment acquisition cost quipment operating cost*: energy, filters, maintenance, overhauls, repairs, breakdowns quipment total cost he acquisition cost is just one part of the equation. t s the total cost including the operating cost *throughout the life cycle of the equipment that must be kept low. his is what Q delivers. he advanced technology, design, robustness, durability and safety of Q products generate major savings during the equipment s entire life cycle. High-Productivity nnovative Products MX rticulated fume extractor arm Overhead canopies are a thing of the past. Workers were actually breathing the dust and smoke-filled air as it was travelling upward toward the canopy. ource capture is the safe and the right way to eliminate the harmful pollutants that are the primary cause of lung diseases. Maxair fume arms are built to reduce to a minimum the presence of industrial indoor air particles. From laboratories right up to the large welding shops, Maxair fume arms will get the job done. 2

3 Fume rms full line of articulated fume extractor arms fficient, robust and easy to handle Most of our competitors do not include these standard features: Highly functional design facilitates fume arm handling and ease of movement. ll supports and articulation joints are outside of the fume arm. he inside is smooth, without any obstacles that could reduce airflow, accumulate deposits and increase internal friction, which consume energy unnecessarily. xternal supports and articulation joints are readily accessible, easy to adjust and require no maintenance. ir diverter in hood significantly increases dust and smoke capture velocity. he unique design of the robust and durable central pivot made of steel makes 360 rotation easy. he Maxair steel tube fume arm is far more spark-resistant than constructions with a flexible hose. ll Maxair arms are delivered preassembled and adjusted, ready for rapid installation and operation. he Maxair fume extractor arm has arrived... 6 [160mm] and 8 [200mm] arms Multi-application equipment Welding Gouging Dusts utting Grinding Fumes xtrusion lines Gases ypical applications for the Maxair fume arms 3 [75mm] and 4 [100mm] Laboratories esearch facilities Beauty parlors mall dust applications Museums oldering Light welding 3 arms available in 3 (1 m) and 5 (1.5 m) models 4 arms available in 5 (1.5 m), 7 (2 m) and 8 (2.5 m) models 6 [160mm] and 8 [200mm] Medium to heavy welding Heavy smoke Plasma cutting Grinding and sanding Foundries Large dusts applications Gouging hese arms are available in 7 (2m), 10 (3m) and 14 (4m) tainless steel arms (all diameters and all lengths) specially designed for: Pharmaceutical Food processing austics orrosive gases olvent fumes Laboratories High temperature High humidity ggressive applications elescopic 6 [160mm] fume arms Fume arm tubes are made of stainless steel and steel with cast aluminum joints, which include friction discs and are fully adjustable. he arms have a handle that completely surrounds the hood to facilitate easy repositioning from all sides. he hood diameter is 12. ll joints include a 300 o F hose which is gear clamped to the tube. ll hoods are equipped to receive an optional light kit. deal for: estricted space (cubicles) eaching facilities Low-ceiling applications Models atalog Minimum Maximum rm Hood Weight number working working diameter diameter lb / [kg] range range inches / inches / inches / inches / [mm] [mm] [mm] [mm] 1. PG / / / /315 56/ PG / / / /315 60/27.5 3

4 Fume rms Outstanding Maxair features Direct mount fan (option) ncapsulated recoil spring xternal joints mooth tube design Heavy-duty support bracket ube grab handle ir diverter (standard) and light kit mounting (optional) Vacuum damper 4 HNL D Model rm diameter [inches] / [mm] 3 / 75 3 / 75 4 / / / 100 rm reach maximum [feet] / [m] 3 / / / / / / / / / / / 4.0 H 1 vailable hood diameter [inches] / [mm] 12 (14) / 315 (350) 12 (14) / 315 (350) 12 (14) / 315 (350) 14 (20) / 350 (500) 14 (20) / 350 (500) 14 (20) / 350 (500) dd the letter before the model number to order or specify stainless steel arms. dd the letter P after the model number to order or specify standing flange-mounted arms. Hood grab handle rm diameter ource capture has never been so easy and efficient H 2 H 3 Bracket model 3 (75mm) WB (100mm) WB (160mm) WB (200mm) WB-008 For stainlees steel brackets: dd the letter after the model number. ecommended airflow 3 arm FM 4 arm FM 6 arm FM 8 arm FM

5 Fume rms Leading-edge construction Hood grab handle Outside hood joint elements made of aluminum powder painted. ube 2 made from rolled sheet steel and powder painted. t also includes a manual damper near the hood and additional handle on the tube for easier movement. ube grab handle Hood made of aluminum and powder painted. eady to be fitted with the optional light kit. Handle surrounds the hood. MDDL JON Outside adjustment in both versions models Flexible hose with gear clamps. OK JON n standing model: upport spring is placed inside. n hanging model: it s outside (part 12). Outside adjustment on both models. Flexible hose with gear clamps. HOOD JON outside adjustment in both models. Hood can be moved forward, backward and sideways. ounter-flange connection (galvanized or stainless steel) Flexible hose with gear clamps. Outside middle joint elements made of cast aluminum (6 and 8 ) or steel (3 & 4 and powder painted. ube 1 made from rolled sheet steel, and powder painted. Outside socket joint elements made of powder-painted aluminum. nner sleeve made of steel and powder painted; both elements (1, 2) allows for arm rotation of 350º with stop or 360º without stop. Outer sleeve made of cast aluminum and powder painted, with mounting flange. ncapsulated spring spanning between shoulder and elbow sections 5

6 60 o Fume rms MX self-locking arm in 3, 4, 6 and 8 models MX air self-locking arms provide the most economical and effective methods for capturing fumes and dusts. ontaminants are removed at the source. he self-supporting joints, flexible hoses and smooth bore tubing enable easy placement of the arm s hood near the source. MX HNGNG MODL Maximum reach MX NDNG MODL Maximum reach 60 o 90 o pecifications Fume arm tubes are made of steel with cast aluminum joints, which include friction discs and are fully adjustable. he arms have a handle that completely surrounds the hood to facilitate easy repositioning from all sides. Hood diameters vary from 6" on the 3" arms, to 14" on the 8" arms. Please refer to the chart on page 4. ll joints include a 300 o F hose, which is gear clamped to the tube. ll hoods are equipped to receive an optional light kit. he hood diverter increases capture velocity. MX self-locking arms can be combined with several accessories to provide the best solution to specific problems: Pivoting extension booms can increase reach from 3 to 19.5 feet rms with a standing bench-mountable flange vailability of fans or filtering systems large variety of hoods can be manufactured to suit particular requirements. Different diameters and various types of metal tubes are available. Horizontal maximum reaches indicated are calculated with installation of arm at the recommanded height and use of work surface at 30" high [0.85m]. MXMM H HNGNG MODL 3 ft [1m] arm: 2.5 [0.85m] 5 ft [1.5m] arm: 4.5 [1.4m] 7 ft [2m] arm: 6 [1.8m] 10 ft [3m] arm: 8.5 [2.6m] 14 ft [4m] arm: 11.8 [3.5m] tanding models have full reach of their length. pplications ll welding processes: Glue fumes, grinding dust and most airborne dust oldering fumes hemical applications, such as laboratories (stainless steel fume arms) 6

7 Fume rms tatic pressure & air flow MX 3" (75 mm) Fume rm MX 6" (160 mm) Fume rm P P FM FM m 3 /hr m 3 /hr Folded rm nfolded rm FLOW Folded rm nfolded rm FLOW MX 4" (100 mm) Fume rm MX LOPNG 6" (160 mm) Fume rm P FM m 3 /hr Folded rm nfolded rm FLOW P FM m 3 /hr FLOW MX 5" (125 mm) Fume rm MX 8" (200 mm) Fume rm P FM m 3 /hr Folded rm nfolded rm FLOW P FM m 3 /hr Folded rm nfolded rm FLOW uperior technology generating substantial operating savings 7

8 Fume rms HNL D Minimum recommended mounting height: H= 7.1 ft (2.1 m) for the 7 (2 m) arms. H= 9.8 ft (2.9 m) for the 10 (3 m) arms. H= 10.5ft (3.3 m) for the 14 (4 m) arms. Bracket below must be ordered separately. Both models (hanging and standing ) can be mounted on the bracket. For bracket dimensions, see technical data on this page. Maxair fume arms mounting flanges: rm n d D1 D2 D3 h diameter [in.] / [in.] / [in.] / [in.] / [in.] / [inches] [mm] [mm] [mm] [mm] [mm] / / / / / / / / / / / / / / / / / / / / 9 rm wall mounting bracket H h D1 D2 b.c.d. B b L D3 n # of holes l L D4 Bracket type Dimensions [inches] /[mm] ød1 ød2 n ød3 ød4 L l H h B b i weight lb / [kg] WB / / /7 0.32/ / / / / / /108 1/.45 WB / / /7 0.32/ / / / / / /130 1/.45 WB / / /7 0.43/ / / / / / / /35 8/3.6 WB / / /9 0.43/ / / / / / / /40 14/6.3 Options PND N ND Light kits Fan and light control on the hood High temperature or F.D.. hose at joints Fan mounted above arm bracket Larger or custom inlet hoods ustom colors (minimum quantities required) 8 o obtain a free copy of our full-colour corporate brochure, please call : P.O. Box 72031, Bois-des-Filion, Qc, anada J6Z 47 el.: / Fax: (450) Web site: / info@aqcdust.com pecifications may change without notice. Maxair- [0705]