SPLIT SYSTEMS. Air Handling Unit. Condensing Section

Transcription

1 SPLIT SYSTEMS Air Handling Unit Condensing Section

2 EC Series Split Systems Condensing Sections Dimensions ISO Certified Performance MODEL L W H Water WLHP Cooling WLHP Heating GWHP Cooling GWHP Heating GLHP Ratings Length Width Height Conn. Capacity EER Capacity COP Capacity EER Capacity COP See Note GPM EC /4" FPT 18, , , , EC /4" FPT 24, , , , EC /4" FPT 28, , , , EC /4" FPT 35, , , , EC /4" FPT 37, , , , EC /4" FPT 41, , , , EC " FPT 47, , , , EC " FPT 61, , , , EC " FPT 66, , , , EC -_CS_-FXX EC-Series Split System Model Nomenclature EC - _- _ ECDGIP ISO.P65 REV: GLHP performance certified with extended range package. See extended range performance for ratings. Performance certified with corresponding EC-Series air handling unit. Split systems not available with hot gas reheat or bypass. Series: Supply Air Location: EC-Aquarius T-Top S-Straight Through Nominal Capacity: E-End Blow B-Bottom Voltage: 1-208/ Return Air Location: L-Left 3-208/ R-Right Water Connections: F-Front Cabinet Type: CS-Condensing Section Condenser Material: AH-Horizontal Air Handler C-Copper AV-Vertical Air Handler N-Cupro-Nickel

3 EC Series Split Systems Vertical Air Handlers L W H C D E A B G F F J K M N N Recommended MODEL R/A Duct R/A Duct Filter Rack Top Blow Units (XLT & XRT) Bottom Blow Units (XLB & XRB) Replacement Length Width Height Flg Width Flg Height Height S/A Duct Collar XLT XRT Blower Opening XLB XRB Nominal Filter Size EC X 20 X 1 EC X 20 X 1 EC X 20 X 1 EC X 24 X 1 EC X 20 X 1 EC X 24 X 1 EC X 30 X 1 EC X 30 X 1 EC X 30 X 1 (2) Top Blow EC -_AVX-XLT Top Blow EC -_AVX-XRT Bottom Blow EC -_AVX-XLB ECAVDGIP ISO.P65 REV: Bottom Blow EC -_AVX-XRB Not available with hot gas reheat or bypass options. Consult factory for available options. Specifications subject to change without notice.

4 EC Series Split Systems Horizontal Air Handlers L W H A B C D E F G F G F G F G Recommended MODEL S/A Duct S/A Duct R/A Duct R/A Duct Filter Rack Left Rtn, End Blow Right Rtn, End Blow Left Rtn, Str Through Right Rtn, Str Through Replacement Length Width Height Height Width Flg Width Flg Height Height (XLE) (XRE) (XLS) (XRS) Nominal Filter Size EC X 20 X 1 EC X 20 X 1 EC X 20 X 1 EC X 30 X 1 EC X 20 X 1 EC X 30 X 1 EC X 20 X 1 (2) EC X 20 X 1 (2) EC X 24 X 1 (2) Straight Through EC -_AHX-XRS Straight Through EC -_AHX-XLS End Blow EC -_AHX-XRE End Blow EC -_AHX-XLE ECAHDGIP ISO.P65 REV:9-06 Not available with hot gas reheat or bypass options. Consult factory for available options.

5 ES Series Split Systems Condensing Sections Dimensions ISO Certified Performance MODEL L W H Water WLHP Cooling WLHP Heating GWHP Cooling GWHP Heating GLHP Cooling GLHP Heating GPM Length Width Height Conn. Capacity EER Capacity COP Capacity EER Capacity COP Capacity EER Capacity COP ES /4" FPT ES /4" FPT ES /4" FPT ES /4" FPT ES /4" FPT ES " FPT ES " FPT ES " FPT ES -_CS_-FXX ESCSDGIP ISO.P65 REV: Performance certified with corresponding ES-Series air handling unit. Split systems not available with hot gas reheat or bypass. Consult factory for available options. ES-Series Split System Model Nomenclature ES - _- _ Series: Supply Air Location: ES-Enviro-Saver T-Top S-Straight Through Nominal Capacity: E-End Blow B-Bottom Voltage: 1-208/ Return Air Location: L-Left 3-208/ R-Right Water Connections: F-Front Cabinet Type: CS-Condensing Section Condenser Material: AH-Horizontal Air Handler C-Copper AV-Vertical Air Handler N-Cupro-Nickel

6 EV/ES Series Split Systems Vertical Air Handlers MODEL L W H C D E A B G F F J K M N N Recommended R/A Duct R/A Duct Filter Rack Top Blow Units (XLT & XRT) Bottom Blow Units (XLB & XRB) Replacement Length Width Height Flg Width Flg Height Height S/A Duct Collar XLT XRT Blower Opening XLB XRB Nominal Filter Size EV/ES X 20 X 1 EV/ES030, X 24 X 1 EV/ES X 30 X 1 EV/ES X 30 X 1 EV/ES X 30 X 1 EV/ES X 30 X 1 (2) Top Blow EV/ES -_AVX-XLT Top Blow EV/ES -_AVX-XRT Bottom Blow EV/ES -_AVX-XLB EV/ESAVDGIP.P65 REV: Bottom Blow EV/ES -_AVX-XRB Not available with hot gas reheat or bypass. Consult factory for available options. Internal electric heat available on 208/ units. GS Air Handlers have ECM motors

7 EV/ES Series Split Systems Horizontal Air Handlers L W H A B C D E F G F G F G F G Recommended MODEL S/A Duct S/A Duct R/A Duct R/A Duct Filter Rack Left Rtn, End Blow Right Rtn, End Blow Left Rtn, Str Through Right Rtn, Str Through Replacement Length Width Height Height Width Flg Width Flg Height Height (XLE) (XRE) (XLS) (XRS) Nominal Filter Size EV/ES X 20 X 1 EV/ES030, X 30 X 1 EV/ES X 20 X 1 (2) EV/ES X 20 X 1 (2) EV/ES X 20 X 1 (2) EV/ES X 24 X 1 (2) Straight Through EV/ES -_AHX-XRS Straight Through EV/ES -_AHX-XLS End Blow EV/ES -_AHX-XRE EV/ESAHDGIP.P65 REV: End Blow EV/ES -_AHX-XLE Not available with hot gas reheat or bypass. Consult factory for available options. Internal electric heat available on 208/ units. ESUnits have ECM motors

8 AU/ES Series Two Stage Split Systems Condensing Sections Dimensions ISO Certified Performance MODEL L W H Water WLHP Cooling WLHP Heating GWHP Cooling GWHP Heating GLHP Cooling GLHP Heating GPM Length Width Height Conn. Capacity EER Capacity COP Capacity EER Capacity COP Capacity EER Capacity COP AU/ES025 Full /4" FPT 25, AU/ES025 Part /4" FPT AU/ES035 Full /4" FPT AU/ES035 Part /4" FPT AU/ES049 Full " FPT AU/ES049 Part " FPT AU/ES061 Full " FPT AU/ES061 Part " FPT AU/ES071 Full " FPT AU/ES071 Part " FPT AU/ES -_CS_-FXX ES/AUCSDGIP ISO.P65 REV: Performance certified with corresponding ES-Series air handling unit. Split systems not available with hot gas reheat or bypass. Consult factory for available options. AU/ES-Series Split System Model Nomenclature ES - _- _ Series: Supply Air Location: ES-Enviro-Saver T-Top AU-Aquarius S-Straight Through Nominal Capacity: E-End Blow B-Bottom Voltage: 1-208/ Return Air Location: L-Left 3-208/ R-Right Water Connections: F-Front Cabinet Type: CS-Condensing Section Condenser Material: AH-Horizontal Air Handler C-Copper AV-Vertical Air Handler N-Cupro-Nickel

9 AU/ES Series Two Stage Split Systems Vertical Air Handlers L W H C D E A B G F F J K M N N Recommended MODEL R/A Duct R/A Duct Filter Rack Top Blow Units (XLT & XRT) Bottom Blow Units (XLB & XRB) Replacement Length Width Height Flg Width Flg Height Height S/A Duct Collar XLT XRT Blower Opening XLB XRB Nominal Filter Size AU/ES025, X 24 X 1 AU/ES X 30 X 1 AU/ES X 30 X 1 AU/ES X 30 X 1 (2) Top Blow AU/ES -_AVX-XLT Top Blow AU/ES -_AVX-XRT Bottom Blow AU/ES -_AVX-XLB AU/ESAVDGIP.P65 REV: Bottom Blow AU/ES -_AVX-XRB Not available with hot gas reheat or bypass. Consult factory for available options. Internal electric heat available on 208/ units. AU/ES Air Handlers have ECM motors

10 AU/ES Series Two Stage Split Systems Horizontal Air Handlers L W H A B C D E F G F G F G F G Recommended MODEL S/A Duct S/A Duct R/A Duct R/A Duct Filter Rack Left Rtn, End Blow Right Rtn, End Blow Left Rtn, Str Through Right Rtn, Str Through Replacement Length Width Height Height Width Flg Width Flg Height Height (XLE) (XRE) (XLS) (XRS) Nominal Filter Size AU/ES025, X 30 X 1 AU/ES X 20 X 1 (2) AU/ES X 20 X 1 (2) AU/ES X 24 X 1 (2) Straight Through AU/ES -_AHX-XRS Straight Through AU/ES -_AHX-XLS End Blow AU/ES -_AHX-XRE AU/ESAHDGIP.P65 REV: End Blow AU/ES -_AHX-XLE Not available with hot gas reheat or bypass. Consult factory for available options. Internal electric heat available on 208/ units. AU/ES Units have ECM motors

11 EC Series Split Systems Condensing Sections Dimensions ISO Performance MODEL "A" (2) Suct. (2) Liquid WLHP Cooling WLHP Heating GWHP Cooling GWHP Heating GLHP Ratings GPM Height Cond Out Line Dia Line Dia Capacity EER Capacity COP Capacity EER Capacity COP See Note EC /8" 1/2" 70, , , , EC /8" 1/2" 94, , , , EC /8" 1/2" 121, , , , EC /8" 5/8" 154, , , , EC /8" 5/8" 178, , , , EC /8" 5/8" 215, , , , EC /8" 7/8" 243, , , , EC /8" 7/8" 289, , , , EC /8" 7/8" 378, , , , Panel 1 Accesses Compressors, Electrical and Refrigeration Components Panel 2 Accesses Compressors and Refrigeration Components EC -_CS_-FXX EC EC EC are certified at ISO EC are beyond the scope of the ISO program but are rated in accordance with the standard. GLHP performance certified with extended range package installed. See extended range performance table for GLHP ratings. Units have independent dual refrigerant circuits. Performance certified with corresponding EC-Series air handling unit. Split systems are not available with hot gas reheat or bypass options. LECCSDGIP ISO.P65 REV: 06-05

12 EC Series Split Systems Vertical Air Handler Dimensions Dimensions All Dimensions +/ " A B C Suction Liquid Model Unit Fltr Rack R/A Duct Line Line Height Height Flg Height Diameter Diameter /8" 1/2" /8" 1/2" /8" 1/2" /8" 5/8" /8" 5/8" /8" 7/8" /8" 7/8" /8" 7/8" /8" 7/8" Front Return Rear Supply EC - AVX-XFR EC Standard Blower Orientation Optional Blower Orientation ( ) Front Return Top Supply EC - AVX-XFT Recommended Replacement Filter Size (Nominal) 20 x 34-1/2 x 1 (2 per unit, ) 20 x 34-1/2 x 1 (4 per unit, ) 30 x 34-1/2 x 1 (4 per unit, 360) Front Return Rear Supply EC - AVX-XFR Standard Blower Orientation Optional Blower Orientation ( ) Front Return Top Supply EC - AVX-XFT Service Access Panel # Access To: 1 Controls, Blower 2 Blower & Motor EC Not available with hot gas reheat or bypass options. Consult factory for available options. Due to continuing research and development, specifications are subject to change with out notice. LCAVDGIP.P65 Rev:12-05

13 EC Series Split Systems Horizontal Air Handler Dimensions Dimensions All Dimensions +/ " Dimension Model Height Width Depth Return Air Dimensions A B C Connection Size (2 each) Liquid 1/2" 1/2" 1/2" 5/8" Suction 7/8" 7/8" 7/8" 7/8" Supply Air Dimensions (Blower Outlet) J K L Replacement Filter Size x 34-1/2 x 1 (2 per unit) x 34 x 1 (2 per unit) EC - AHX-SLS Service Access Panel# Access To: 1 Control Box 2 Blower & Motor EC072, 096 & 150 (-SLS Only) EC120 (-SLS Only) Notes: All condensate connections are 0.75" FPT. Not available with hot gas reheat or bypass options. Consult factory for available options. Due to continuing research and development, specifications are subject to change without notice. LECAHDGIP ISO.P65 Rev:06-05

14 EC-SERIES SPLIT SYSTEMS EXTENDED RANGE RATINGS FHP MANUFACTURING HIGH-EFFICIENCY WATER SOURCE HEAT PUMPS, ENERGY-MISER LINE Model Number Rated CFM Rated GPM Cooling Capacity EER Heating Capacity COP EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , EC , , ISO Ground Loop Heat Pump Rating Conditions Entering Air Temp Entering Dry Bulb Wet Bulb Fluid Temp Cooling 80.6 o F (27 o C) 66.2 o F (19 o C) 77 o F (25 o C) Heating 68 o F (20 o C) 32 o F (0 o C) EC018 through EC120 are certified to ARI / ISO Standard for Ground Loop Heat Pump applications. EC150-EM360 are beyond the scope of ARI / ISO Standard but are rated in accordance with the rating conditions of the Ground Loop Heat Pump application point. All ratings reflect a matched condensing section/air handler set. All EC-Series units must have the optional extended range performance option installed to run at conditions outside of those shown in the performance tables of the individual unit specification data sheets. The ratings shown above reflect the use of the extended range performance option. Minimum entering fluid temperature with fresh water is 45 o F (7.2 o C). The above ratings are based on the use of a solution of 15% methanol and 85% water by weight. FHP recommends antifreeze protection to at least 20 o F (11 o C) below the lowest entering fluid temperature. Note: Published fluid side pressure drop tables are based on 70 o (21 o C) fresh water. When designing the system, pressure drop should be modified for antifreeze content and fluid temperature. FHP recommends adding 0.2% to the system pressure drop for every 1 o F (0.36% / 1 o C) below 70 o F (21 o C) in addition to any antifreeze correction factors. As a result of continuing research and development, specifications are subject to change without notice. SECEXRRIP6.P65 Rev: 01-09