WB produces >>> 1. TANK FITTING PRODUCTS 2. ALUMINUM DOME COVERS 3. INTERNAL FLOATING ROOF SYSTEMS 4. EXTERNAL FLOATING ROOF SEAL SYSTEMS

COVER EQUIPMENT. VAREC BIOGAS 400W Series EMERGENCY RELIEF MANHOLE COVERS

COVER EQUIPMENT VAREC BIOGAS 400W Series EMERGENCY RELIEF MANHOLE COVERS The 400W Series is designed to provide emergency pressure and/or vacuum relief in storage tanks and vessels. Introduction The Varec

Model ES-660-HF High Flow Spring-Loaded Hatch

Instruction Manual Model ES-660-HF February 2015 Model ES-660-HF High Flow Spring-Loaded Hatch Table of Contents Introduction...1 Specifications...2 Principle of Operation...2 Tagging Information...2 Installation

ES-660 Series Spring-Loaded Hatch

Instruction Manual ES-660 Series March 2015 ES-660 Series Spring-Loaded Hatch Table of Contents Introduction...2 Specifications...2 Principle of Operation...2 Tagging Information...2 Installation...3 Maintenance...4

ES-665 Series Spring-Loaded Thief Hatch

Instruction Manual D10416X01 ES-66 Series December 017 ES-66 Series Spring-Loaded Thief Hatch Table of Contents Introduction...1 Specifications... Principle of Operation... Tagging Information... Installation...

VAREC 5810B AND 5820B SERIES RELIEF VALVE WITH FLAME ARRESTER

These units combine the high flow capacity of a pressure and vacuum relief valve with an extensible bank flame arrester to provide maximum protection and reliable operation FEATURES 5820B Oversized pressure

VAREC 5910B AND 5920B SERIES RELIEF VALVE WITH FLAME ARRESTER

These units combine the high flow capacity of a pressure and vacuum relief valve with an easy-to-maintain flame arrester for maximum protection and reliable operation FEATURES 5920B Oversized pressure

FRP VENTS. Fiberglass Reinforced Plastic Vents... No Exposed Metal Components. Distributed by Relevant Solutions relevantsolutions.

FRP VENTS Fiberglass Reinforced Plastic Vents...... No Exposed Metal Components PROTECTOSEAL SERIES STYLE SIZES1 P8540 H End-of-Line Pressure / Vacuum 12" - 12" P18540 H Pipe-Away Pressure / Vacuum 12"

VAREC 5810B/5820B Series. Relief Valve and Flame Arrester

VAREC 0B/0B Series The 0B/0B Series is a combination of the 00B/00B Series and Relief Valve and the 000 Series Flame Arrester. INTRODUCTION The VAREC 0B/0B Series Relief Valve and Flame Arrester is a combination

For high temperature and chemical applications, Varec recommends the extended service option which features Teflon or Viton O-ring and gasket.

GAS CONTROL VAREC 7100B Series PRESSURE RELIEF VALVES The 7100B Series is designed to protect low pressure storage tanks and systems from being over pressured. Introduction The Varec 7100B Series is a

The 7100B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction

VALVES & CONTROLS VAREC 00B SERIES The 00B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction The Varec 00B Series is a pressure relief valve designed

Crosby Style JQ Pressure Relief Device. Flow Control

Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed

Index. Butterfly Valves

Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft

Eco-Saf System. Type ECR Reverse Buckling Compression Loaded Disk

Catalog # 77-4012 Catalog # 77-4012 Eco-Saf System Type ECR Reverse Buckling Compression Loaded Disk ECR reverse buckling disk EC-7RS safety head BSBsystems.com BSB.ie Visit our website for the most complete,

Crosby Style JQ pressure relief device

A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides

STANDARDS and SPECIFICATIONS

ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)

PISTON DIVERTER VALVES

DP Series DIVERTER VALVES PISTON DIVERTER VALVES PROCESS VALVES STRAHMAN DEAD SPACE FREE DIVERTER VALVES Piston Diverter Valves Code: DPS4 Standard branch angles: 45 o and 90 o 60 o and specific angles

SECTION VALVES PART 1 - GENERAL

1.01 RELATED DOCUMENTS SECTION 15100 VALVES PART 1 - GENERAL A. The work in this section includes the furnishing and installation of all control valves and accessories shown on the construction plans and

94406 Vertical Inline Deflagration Flame Arrester. Features

94406 The Shand & Jurs 94406 Vertical Inline Deflagration Flame Arresters are designed to provide a positive flame stop on low pressure tanks or piping systems containing flammable liquids or solvents

STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES

STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES STANDARD SPECIFICATION BALL VALVE STRAIGHT- THROUGH TYPE 301K SERIES GENERAL The 301K series provides ball valves with a special inner

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends

SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)

Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future

Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge

ID & IP SERIES IN-LINE DISC AND PISTON VALVES

ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing

SPRING LOADED VENTS. Set Points of 3 PSIG and Above PROTECTOSEAL

SPRING LOADED VENTS Set Points of 3 PSIG and Above PROTECTOSEAL SERIES STYLE 9540 End-of-Line Pressure/Vacuum Breather Vent 19540 Pipe-Away Pressure/Vacuum Breather Vent 9240 End-of-Line Vacuum Relief

Tank Fittings, Flame Arresters, Valves, Gauges, & Accessories

Tank Fittings, Flame Arresters, Valves, Gauges, & Accessories Tank Fittings & Flame Arresters by Shand & Jurs Today s growing markets call for keeping an increasingly larger supply of your products close

BUTTERFLY VALVE 17 SERIES Gearbox

DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application

OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.

IN-LINE DISC & PISTON VALVES

ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded

Installation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T

Installation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T IOM-L61T Ref. I.D.: 101942 Page 2 of 6 TABLE OF CONTENTS INTRODUCTION 3 DESIGN AND FUNCTION 3 a. FIGURE 1 TYPICAL

Crosby Style JQ pressure relief device

A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides

Floating Ball Valve - Design Features

408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting

Cast Iron Liquid Relief Valves

Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze

Rupture Disk Selection Guide

Rupture Disk Selection Guide Safety through knowledge and performance. RA4 Reverse Acting (Compression-Loaded) Metal Rupture Disks Seat Configuration / / 2 40 0.14 2.76 Mating Holder RAH Solid metal, non-fragmenting

Installation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T

Installation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T IOM-L61T Rev. B 103705 Ref. I.D.: 101942 Page 2 of 7 TABLE OF CONTENTS INTRODUCTION 3 DESIGN AND FUNCTION 3 a.

REPAIR PARTS LIST 31

LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"

ANDERSON GREENWOOD TYPE 4410 SIDE ENTRY ATMOSPHERIC VACUUM RELIEF VALVES

Weight or spring loaded valves with a side inlet capable of high capacity vacuum relief. Designed to work closer to a tank's MAWV, increasing productivity, reducing emissions and product evaporation FEATURES

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from

Table of Contents. 1900/P3 Series Exposed spring design - The spring in this design is exposed for atmospheric cooling. D through T orifice sizes.

Scope of Design Table of Contents Scope of Design...............................................................1900P.1 Materials 1900/P1 (Conventional)......................................................1900P.3

manhole products catalog

manhole products catalog 6401 East 40th Street Kansas City, MO 64129 1-816-924-3900 1-800-821-6583 Fax: 816-924-3903 www.claybailey.com E-mail: CandBMfg@claybailey.com 1/13 Manholes Elliptical manhole

Stainless Steel / Iron Valve ISO 9001

CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:

MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY

9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in

SECTION SWING CHECK VALVES

PART 1 GENERAL 1.1 DESCRIPTION This section includes materials, testing, and installation of swing check valves as shown in the Drawings and specified herein, in accordance with the requirements of the

289 Series Relief Valves

Instruction Manual Form 174 89 Series May 013 89 Series Relief Valves! WARNING Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or

Circular Manways. There is an array of different lid designs, hinge positions and sealing arrangements, to suit your application.

ircular Manways lchem Process offers a comprehensive range of circular manways, hatches and doors. vailable for both atmospheric and pressurised applications, the manways are available in 316 and 304 stainless

CASH VALVE SERIES FR BACK PRESSURE VALVES

Diaphragm actuated valves designed for either continuous or intermittent operation which provide accurate, repetitive pressure control FEATURES GENERAL APPLICATION For use on practically all fluids and

Engineered Solutions For Your Tank Equipment Needs

Engineered Solutions For Your Tank Equipment Needs Product Brochure World Leader in Tank Protection Flame & Deflagration Arresters Detonation Arresters Level Gauges Emissions Monitoring Conservation Vents

94407 Horizontal Inline Deflagration Flame Arrester

94407 The Shand & Jurs 94407 Horizontal Inline Deflagration Flame Arrester is designed to provide a positive flame stop in horizontal gas piping systems containing flammable vapors having a low flash point.

WEDGE & SLAB GATE VALVES

GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have

Non-Pressure Applications

Non-Pressure Applications Jan 7 - Screen Inserts Available LH " Non-pressure fill cover / quick access inspection door 88 79 SS / Plated SS / Plated SSL / Plated SS / SS (plated wing nut) " x." Steel "

Forged 3 Piece Trunnion Mounted Ball Valves Series PL

Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece

Biogas safety control equipment

Biogas safety control equipment As environmental concerns and energy efficiency are increasing, efficient economical and safe gas control systems become an increasingly important part of operating the

CHARACTERISTICS ACCESSORIES. High Efficiency Pilot Operated Safety Valves

Technical High Efficiency Pilot Operated Safety Valves are derived from the conventional valves of the same series, and retain the same orifices. They are designed and manufactured in according to the

VELAN TRUNNION-MOUNTED

VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,

Installation & Parts Manual K-7, K-15, & K-30 Air Actuated & Differential Check Valves

Installation & Parts Manual K-7, K-15, & K-30 Air Actuated & Differential Check Valves Installation: M400-30 www.lcmeter.com Table of Contents Description Page Number General Information... 2 Specifications...

A. This Section includes general duty valves common to several HVAC piping systems.

SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

D I S T R I B U T E D V A L V E S. TECHNO Short Form Wafer Style Check Valves TECHNO

TECHNO Short Form Wafer Style Check Valves SHORT FORM WAFER STYLE CHECK VALVES Technocheck Short Form (SF), Cost Efficient, Reliable, Wafer Style Check Valve CLAMP PLATE SUPPORT Non-Slam Quick Closure

PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured

PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,

CUSTOM COMBINATION AIR VALVE

INSTALLATION / OPERATION / MAINTENANCE CUSTOM COMBINATION AIR VALVE INTRODUCTION This manual will provide you with the information to properly install and maintain this valve to ensure a long service life.

PBV s Engineering Excellence At Work

PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves

VD SERIES VESSEL & REACTOR VALVES DISC VALVES

VD SERIES VESSEL & REACTOR VALVES DISC VALVES FULL FLOW BOTTOM OUTLET VALVES TANK BOTTOM DISC VALVE CODE: VD4R-VD6R M Ring for high temperature and vacuum. Other sealing systems are available Optional

TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type

TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF

9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST

9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving

The Solution For The Valve Problems Plug Valves

www.3zvalve.com The Solution For The Valve Problems Plug Valves CONTENTS The Solution For The Valve Problems Plug Valves DBB Group Double Block & Bleed Valves 5 Soft Seated Group Sleeved Valves 23 Lined

P630 High Flow Gas Regulator

High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments

Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,

KUNKLE Safety and Relief ValVe PRoductS overview

KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and

Specialty Valves SPECIAL SERVICE

Specialty Valves SPECIAL SERVICE SPECIAL SERVICE FLUOROSEAL PLUG VALVES Whether you are looking for a valve to suit a specific application, or want to customize a standard FluoroSeal Plug Valve, you have

EXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE.

API 6D Expanding/ Slab Gate Valves ANSI 150-300-600-900-1500 SERIES 2-36 EXPG SBG > Control > Flow Quality > lit API 6D EXPANDING/ SLAB GATE VALVES Providing Hundreds of Products. Supporting Thousands

Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.

DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com

Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet

Instruction Manual Form 5410 November 1998 Design CP/ENVIRO-SEAL Bellows Seal Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Contents Introduction.............................. 1 Scope of

Dual Plate Check Valve

Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For

Safety and Relief Valves Product Overview

Safety and Relief Valves Product Overview Kunkle Valve is a leading supplier of Safety and Relief Valve Products for industrial and commercial applications, such as steam boilers, air, or non-hazardous

Engine Construction and Principles of Operation

Ch. 4 Engine Construction and Principles of Operation Gasoline Engine A gasoline fueled engine is a mechanism designed to transform chemical energy into mechanical energy It is an internal combustion engine.

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

DOUBLE ISOLATION SET SINGLE ISOLATION SET

FLANGE ISOLATING GASKET KITS Introduction With the economic and environmental climate of today, it is more important than ever to prevent leakage in your carrier system. Flanges, the most common trouble

Anderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves

ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under

SERIES 670E End-of-Line Deflagration Flame Arrester

SERIES 670E PROTECTOSEAL CAUTION: If any questions arise concerning the proper installation or maintenance of our products, please contact Protectoseal or one of our Authorized Representatives. When installing

IFC Series DR Retainerless Dual Disc Check Valves

IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak

HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES

FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double

*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having

Evans SN Series. Evans. Sanitary & Vacuum Ball Valves

SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN

CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS

CECK VAVE APPICATION SPECIFICATION Sometimes referre to as non-return valve, check valves prevents back-flow, constantly keeping flow in one irection. Check valve are esigne to close quickly an automatically

NJ USA. PO Box 226 Monmouth Junction, NJ USA. Fax:

Catalog No. 408 Loading Arm Catalog 2008 Loading Assembly Catalog PO Box 226 Monmouth Junction, NJ 08852 USA PO Phone: Box 226 732-329-4666 Monmouth Junction, Fax: 732-329-9422 NJ 08852 USA Phone: Email:

Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW

Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'

BALL valve FLOATING BALL VALVE

BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

ABOVEGROUND STORAGE TANK PRODUCTS CATALOG

NEW PRODUCTS! ABOVEGROUND STORAGE TANK PRODUCTS CATALOG NEW UL Listing! High Flow Emergency Vents Emergency Valves Overfill Prevention Valves Audible Alarms Spill Containment Box Overfill Prevention Valves

Consolidated* Series

Technical Specifications Rev. C - 10/2018 Consolidated* 2900-40 Series Pilot-Operated Safety Relief Valve BHGE Data Classification : Public Table of Contents Conversion Table...2 Scope of Design...3 Main

FUEL DISPENSING SYSTEMS SE-27. Component Details. 12V DC - 15 GPM Metered Tank-top Dispensing System

FUEL DISPENSING SYSTEMS Component Details SE-27 12V DC - 15 GPM Metered Tank-top Dispensing System 12V DC Electric Pump - 1 Inlet - 3/4 Outlet 3-Wheel Mechanical Meter 1 Automatic Nozzle, Swivel & Hose

WKM 320F. Flanged floating ball valves

WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5

Crispin Valves Operating Guide. Crispin

Crispin Valves Operating Guide Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA 18603 1-800-AIR-VALV T: (570) 752-4524 F: (570) 752-4962 www.crispinvalve.com sales@crispinvalve.com

20 DREXEL DRIVE, BAY SHORE, NY 11706, USA Phone: (631) / Fax: (631)

20 DREXEL DRIVE, BAY SHORE, NY 11706, USA Phone: (631) 273 4940 / Fax: (631) 273 5018 Email: gnyequip@gnyequipment.com www.gnyequipment.com 3/16 uncoated Stainless Steel (Grounded to Arm) ..up to 36 GNY

Products for the Oil & Gas Industry

Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing

Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.

VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60

Style 46A Manhole Covers

Product Manual Style 46A Manhole Covers Installation and Maintenance Manual (Technical Manual No SDM24) Product Manual INDEX Page Section 1.0 Important Notes 2 1.1 Regarding silos 2 1.2 Regarding manlids

SECTION VALVES

PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:

TOSACA. Catalogue

Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.

WYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S

Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless

Flame arresters 4301A/4319A ATEX Approved

Flame arresters 4301A/4319A ATEX Approved The Whessoe Vapour Control range of flame arresters are designed and certified for use in conjunction with Whessoe pressure and vacuum valves, as well as for use

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)

General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer