SERFILCO INTERNATIONAL PRODUCT BROCHURE PUMPS

Transcription

1 SERFILCO INTERNATIONAL PRODUCT BROCHURE PUMPS

2 Introduction SERFILCO: Pump industry leader worldwide for over 50 years. It has been said that the success of any business comes from finding a need and fulfilling it. In 1961, our founder, Jack Berg, saw a need in the surface finishing industry for better filtration to improve plating quality and reduce rejects. Armed with only the experience gained as a manufacturer s representative selling filters to platers and a desire to be in business for himself, he took the plunge and opened a small storefront business selling pumps, filter chambers and filter cartridges. From that humble beginning, SERFILCO has grown to become a multi-national manufacturer of a wide range of filtration and liquid handling products serving many industries. With five plants in North America as well as operations in England, France and Germany, plus a worldwide network of sales representatives, we are strategically positioned to supply the needs of our customers. Over the past four decades, we ve seen many changes in the field of metal finishing and process industries. As these changes were taking place, equipment was also changing. Newer and better designs, along with a broader array of chemically resistant materials are being used to provide the tools needed to operate more effectively and efficiently, as well as with greater safety for workers and the environment. SERFILCO Pumps, Filters, Chambers and Filtration Systems takes pride in its role in bringing many of these advances to the marketplace. Magnetically coupled pumps, vertical pumps, externally mounted single and double mechanical seal pumps, all-plastic filtration systems, and pumped agitation systems using eductors to agitate process and cleaning solutions all can be tracked back to the foresight, ingenuity and perseverance of SERFILCO people. For us, the end of the last millennium was a learning period during which time we accumulated a generation of experience in meeting needs and solving problems with products that are the benchmark of the industry. Today, at the start of the new millennium, we are looking forward to the future with the expectation that we will continue to be a technical resource, contributing to the growth and satisfaction of our customers and their needs including our Serfilco Pumps, Filter Chambers, Filtration Systems, Filtration Media, Pump Accessories and Replacement Parts for Pumps.

3 Contents 01 Magnetic Coupled Pumps 01-1 Introduction to Magnetic Coupled Pumps 01-2 Series 'A & B' Magnetic Coupled Pumps 01-4 Series 'DSS' Stainless Steel Magnetic Drive Pumps 01-6 Series 'ST' Magnetic Coupled Pumps 02 Horizontal Sealed Pumps 02-1 Introduction to Horizontal Sealed Pumps 02-2 Series 'HA' Horizontal Centrifugal Pumps 02-4 Series 'HE' Horizontal Pumps 02-6 Series 'HF' Horizontal Centrifugal Pumps 02-8 Series 'HH' Horizontal Centrifugal Pumps 03 Self-Priming Pumps 03-1 Introduction to Self-Priming Pumps 03-2 Series 'G' Self-Priming Centrifugal Pumps 03-4 Series 'I' Self-Priming Centrifugal Pumps 03-6 Series 'S' Self-Priming Centrifugal Pumps 03-8 Series 'T' Self-Priming Centrifugal Pumps 04 Vertical Pumps 04-1 Introduction to Vertical Pumps 04-2 Series 'E' Stainless Steel Vertical Pumps 04-4 Series 'EF' Vertical Pumps 04-6 Series 'EO' Vertical Pumps 04-8 Series 'EO¾' Vertical Sump Pumps Series 'HB' Vertical Sump Pumps 05 OTHER Pumps 05-1 Introduction to Other Pumps 05-2 Series 'AOD' Air Operated Diaphragm Pumps

4

5 Magnetic Coupled Pumps

6

7 01-1 Introduction to Horizontal Sealed Pumps Serfilco Magnetic Drive Pumps eliminate the need for a drive seal and so the risk of leakage is completely eradicated. Using Serfilco magnetic drive pumps means that hazardous liquids can be pumped without spillages.

8 01-2 SERIES A & B MAGNETIC COUPLED PUMPS LEAK PROOF NON METALLIC DESIGN FOR PUMPING AQUEOUS CAUSTIC ACID RINSE CLEANING PLATING ETCH ELECTRONICS Refer to Serfilco bulletin P-503 for full technical details Contact Serfilco sales for more information, quoting AB series Flows to 45lpm or 5m head at 50Hz Non-metallic solution contact: Polypropylene CPVC PVDF ECTFE EPDM or Viton Low Maintenance: No spindles No bearings No thrust washers Continuous duty design Quiet Economical Centrifugal Suitable for SG up to 1.2 Trimmed impellers available for SG s above SERIES A & B HEAD (m) A Pump 69mm Impeller B Pump 73mm Impeller LPM

9 01-3 Dimensions, Motor Power and Specifications SERIES A' mm HOLES 2 OFF SERIES B' mm SLOT 4 PLACES Series A 1/12 115/1/ /15 240/1/ Hose Connection CPVC with ECTFE encapsulated impeller and EPDM O-ring PP with, PP impeller and EPDM O-ring ECTFE with ECTFE encapsulated impeller and EPDM O-ring PVDF with ECTFE encapsulated impeller and Viton O-ring Series A 1/6 Hp /1/50-60, /3/ Hose Connection CPVC with ECTFE encapsulated impeller and EPDM O-ring PP with, PP impeller and EPDM O-ring ECTFE with ECTFE encapsulated impeller and EPDM O-ring PVDF with ECTFE encapsulated impeller and Viton O-ring

10 01-4 SERIES DSS STAINLESS STEEL MAGNETIC DRIVE PUMP Reliable and Trouble Free sealless and leakproof pumping for total solution containment for use on corrosive liquids Refer to Serfilco bulletin P-507 for full technical details Contact Serfilco sales for more information, quoting DSS series Flows to 350lp or 19m head Corrosion Resistant Materials: 316ss EPDM or Viton Carbon PTFE Hastelloy C Shaft Other materials available on request Max. Temperature 120ºC Threaded connections as standard, with Flanged options on request ATEX and Explosion proof available Powerful rare-earth magnet coupling Ex-stock availability 25 SERIES DSS 20 1 HEAD (m) LPM 3

11 01-5 Dimensions, Motor Power and Specifications A C E D B H G I F Pump model A B C D E F G H I " FBSP 3 4" MBSP " FBSP 1" MBSP A 2" MBSP 1-1 2" MBSP Motor dimensions may alter with manufacturer. Flow Curve Model Number HP (kw) Motor (2850 RPM) Voltage 1 2 DSS1x 3 4-MSSK-CM.5 DSS1x 3 4-MSSK-DM.5 DSS1 1 2x1-MSSK-CM1 DSS1 1 2x1-MSSK-DM1.5 (.37) 1 (.75) /1/ /3/ /1/ /3/50 3 DSS1 1 2x1 1 4-MSSK-DM2 2 ( /3/50 Typical applications include; waste treatment, filter systems, mixing and transfer pumping and recirculation filtering, circulation, processing and transfer Seal-less providing maintenance free and leak proof operation The broad range of construction materials allows for a variety of applications and service with most corrosive solutions The impeller is designed to deliver the maximum flow and pressure utilizing the available strength of the synchronized magnets

12 01-6 SERIES ST MAGNETIC COUPLED PUMPS Reliable and Trouble Free sealless and "leak-proof" pumping for total solution containment for use on aqueous acids alkali plating electronics etching waste rinses Refer to Serfilco bulletin P-517 for full technical details Contact Serfilco sales for more information, quoting ST series Flows to 850lpm 32m head Non-metallic solution contact: Polypropylene PVDF EPDM or Vition elastomers Graflon bearings Ceramic Spindle Chemical Duty Motor with oversize bearings, 2-part epoxy finish and a powerful rare earth magnet coupling allow pumping of solutions up to 1.2SG Ex-Stock availability Limited run-dry capability HEAD (m) SERIES ST1-ST LPM SERIES ST3-5H SERIES ST6-ST9 HEAD (m) HEAD (m) H H LPM LPM

13 01-7 Dimensions, Motor Power and Specifications K E D G C B I K A J L F DIMENSIONS MODEL A B C D E F G H I J K L Power (Kw) ST1 1 4" BSP 1 4" BSP ST2 1 2" BSP 3 8" BSP ST3 1 2" BSP 1 2" BSP ST4 1 2" BSP 1 2" BSP ST " BSP 3 4" BSP ST5H 1-1 4" BSP 3 4" BSP ST " BSP 1" BSP ST6H 2" BSP 1-1 4" BSP ST7 2" BSP 1-1 4" BSP ST8 2" BSP 1-1 4" BSP ST " FLANGE 2" FLANGE PP Models Pump Casing & Impeller PP/PPS Spindle - Ceramic O-Ring - EPDM Bearing - Graflon PVDF Models Pump Casing & Impeller - PVDF/PPS Spindle - Ceramic O-Ring - Viton Bearing - Graflon

14

15 Horizontal Sealed Pumps

16

17 02-1 Introduction to Horizontal Sealed Pumps Serfilco is a leading manufacturer of high performance centrifugal pumps molded from tough modern thermoplastics for handling corrosive liquids. Our range of horizontal, close or long-coupled, single or double seal pumps have been designed for a wide range of chemical duty applications and offer unrivalled scope of performance.

18 02-2 SERIES HA HORIZONTAL CENRTIFUGAL PUMP ANSI DIMENSIONAL, HEAVY DUTY CONSTRUCTION Refer to Serfilco bulletin P-207 for full technical details Contact Serfilco sales for more information, quoting HE series Flows to3784l/min or 24m head at 50Hz Excellent chemical resistance: Pumps are machined from solid CPVC Single or Double Mechanical seal options: SiC/SiC Carbon Ceramic EPDM or Viton Elastomers Titanium or Hastelloy C shafts ANSI Flanged Conections Close Coupled or Long Coupled Chemical Duty Motor with oversize bearings, liquid vapour seal, 2-part epoxy finish Seal Flush kits available 30 SERIES HA MODEL 4 x 3 x SERIES HA MODEL 6 x 4 x HEAD (m) HEAD (m) LPM LPM

19 02-3 Dimensions, Motor Power and Specifications Model 4 x 3 x 8 4 x 3 x 10 6 x 4 x 10 Motor Frame 213TC 215TC 254TC 215TC 254TC 256TC 254TC 256TC 284TC 286TC HP A (294) (254) (297) B 4 (102) 4 (102) 4 (102) C (210) (210) 10 (254) D 11 (279) 11 (279) (343) E 7.3 (185) 9.6 (244) 7.3 (185) 9.6 (244) 9.6 (244) 13.1 (333) F&N 15.5 (394) 15.5 (394) 17.0 (432) G* 15.5 (394) 16.6 (422) 17.8 (452) 16.6 (422) 17.8 (452) 20.0 (508) 17.8 (452) 20.0 (508) 21.6 (549) H* 10.3 (262) 12.0 (305) 10.3 (262) 12.0 (305) 12.0 (305) 14.0 (356) J 8.5 (216) 10.0 (254) 8.5 (216) 10.0 (254) 10.0 (254) 11.0 (279) K 5.5 (140) 7.0 (178) 8.3 (211) 7.0 (178) 8.3 (211) 10.0 (254) 8.3 (211) 10.0 (254) 9.5 (241) 11.0 (279) L 3.5 (89) 4.3 (109) 3.5 (89) 4.3 (109) 4.3 (109) 4.8 (121) M 5.3 (135) 6.3 (160) 5.3 (135) 6.3 (160) 6.3 (160) 7.0 (178) Single or double mechanical seals Long coupled and close coupled available CPVC pump body, titanium shafts (Hastelloy C shafts available) with viton or EPDM elastomers and stainless steel external hardware Enclosed impeller Typical applications include: petrochemical, fume scrubbing cooling tower, waste treatment and filter systems High flow rates, chemical resistance and durability make it the ideal work horse

20 02-4 SERIES HE HORIZONTAL PUMP ENERGY SAVING CENTRIFUGAL PUMPS FOR ACID AQUEOUS CAUSTIC CHEMICAL ETCHING PLATING SCRUBBING EFFLUENT WATER APPLICATIONS Refer to Serfilco bulletin P-201S for full technical details Contact Serfilco sales for more information, quoting HE series 500LPM or 30m head Non-metallic solution contact PPP, CPVC, PVDF, ECTFT-T Single or Double Mechanical Seal (carbon/ceramic or sic/sic w/viton or EPDM) Centrifugal - quiet, vibration free Metric Connections or NPT available Pump casing indexes to six directions of discharge Chemical Duty Motor with oversize bearings, liquid vapour seal, 2-part epoxy finish and x1.15 service factor Dry Stop Protection available 60hz operation possible HEAD (m) SERIES HE LPM

21 02-5 Dimensions, Motor Power and Specifications /2" NPT OR BSP " NPT OR BSP A B G D E 251 H F C DIMENSIONS (mm) MOTOR KW A B C D E F G H Motor dimensions may alter with manufacturer. Pump Body CPVC, Polypropylene, PVDF or ECTFE Elastomers EPDM or Viton Enclosed Impellers Option of Single or Double Mechanical Seal Both available in either EPDM or Viton Optional Flange connections (ANSI or ASA) CPVC, PVDF, PP Optional Stainless Steel Shaft Both 50Hz and 60Hz motors available

22 02-6 SERIES HF HORIZONTAL CENTRIFUGAL PUMP HIGH FLOW, HIGH TDH ANSI DIMENSIONAL HIGH EFFICIENCY LOW ENERGY USAGE Refer to Serfilco bulletin P-208 for full technical details Contact Serfilco sales for more information, quoting HF series Flows to 1200lpm or 40m head at 50hz Non-metallic solution contact: High-temperature polypropylene CPVC Single or Double mechanical seals: Carbon / Ceramic Silicon Carbide EPDM or Viton elastomers Long-Coupling kits available ANSI Dimensional, BSP or NPT with optional flanged connections Chemical Duty Motor with 2 part epoxy finish and stainless steel shaft SERIES HF 45 HEAD (m) LPM (1450rpm)

23 02-7 Dimensions, Motor Power and Specifications A 234 2" MNPT DIA 210 3" FNPT B E F C D KW Frame size DIMENSIONS (mm) A B C D E F Motor dimensions may alter with manufacturer. Pump body CPVC or Polypropylene Single or double mechanical seal available in either EPDM or Viton Silicon Carbide Optional ANSI Flange connections available Trimmed impeller to meet specified flow available Typical Applications include; - Petrochemical, Fume Scrubbing/Cooling Tower, Waste Treatment/Process Water and Filter Systems

24 02-8 SERIES HH HORIZONTAL CENTRIFUGAL PUMP HIGH DISCHARGE HEAD PERFORMANCE FOR TRANSFER PUMPING AND RECIRCULATION OF D.I. WATER PLATING ETCHING ELECTRONICS WATER TREATMENT ACIDS Refer to Serfilco bulletin P-206 for full technical details Contact your local Serfilco sales office and quote HH series Flows to 220lp or 33m head at 50hz Non-metallic solution contact: CPVC - 60ºC PVDF - 93ºC Sleeved Impelleer Non-metallic Single Mechanical Seal: Carbon / Ceramic with EPDM or Viton elastomers Connections 1" MNPT inlet x 3 4" MNPT outlet Maximum solids handling capability 3.8mm Optional pedestal mounting for long coupling Standard NEMA 56C TEFC motors, for explosion proof or other motor options please consult the sales office SERIES HH 1 HEAD (m) LPM 5

25 02-9 Dimensions, Motor Power and Specifications A 78 DISCHARGE, 3/4" NPT 111 SUCTION, 1" NPT DIMENSION A HORSE-POWER A Typical Applications: Fume scrubbing Cleaning and de-scaling Water treatment Solution transfer with priming chamber Pump body CPVC or PVDF Choice of EPDM or Viton elastomers A choice of five impeller diameters provides a full range of flow and head performance with efficient use of motor horsepower DRI-STOP pump protector is available to prevent damage to pump due to dry operation Motors are standard NEMA, TEFC (Explosion proof motors available)

26

27 S e l f - P r i m i n g Pumps

28

29 03-1 Introduction to Horizontal Self Priming Pumps Serfilco's self-prime pumps are able to handle low and negative suction conditions and pump dirty and aggressive solutions. Successful adaptation of these products for industrial, agricultural, oilfield, marine and construction applications has resulted in worldwide market acceptance.

30 03-2 SERIES G SELF-PRIMING CENTRIFUGAL PUMP SELF-PRIMING CENTRIFUGAL PUMPS FOR TRANSFER AND RECIRCULATION Flows to 315lpm or 15m head at 50Hz Chemical resistant materials of construction as standard: Noryl Ryton 316ss internal hardware Non-metallic solution contact available on request Will reprime to 4m (based on water at 21 C) 2 x Threaded Connections TEFC Chemical duty motors fitted as standard Refer to Serfilco bulletin P-613 for full technical details Contact your local Serfilco sales office and quote G series HEAD (m) SERIES G A B C D E LPM

31 03-3 Dimensions, Motor Power and Specifications KW, KW, KW, DISCHARGE, 2" MALE & 1-1/2" FEMALE SUCTION, 2" MALE &1-1/2" FEMALE 220 Typical Applications: Recirculation of cooling towers and mixing vats Filtration Lifting from ponds, tanks, sumps and pits Emergency standby Pump is constructed of either Noryl or Ryton It is available with either 316 Stainless steel internal hardware or completely non-metallic solution contact Either single phase motors ( v/1/50-60) or three phase motors ( v/3/50-60) are available Features an open non-clogging impeller Basket type strainer available in either ECTFE or PP protects the pump The large cover makes initial priming and strainer removal quick and easy A PP base plate is included wit close-coupled electric drive pumps

32 03-4 SERIES I SELF-PRIMING CENTRIFUGAL PUMP EFFICIENT, LIGHTWEIGHT AND CHEMICALLY RESISTANT FOR USE ON CHEMICALS WASTES ACIDS INDUSTRIAL LIQUIDS AGRICULTURE AQUACULTURE Refer to Serfilco bulletin P-631 for full technical details Contact your local Serfilco sales office and quote I series Flows to 650lpm or 23m TDH with engine drive Corrosion resistant materials of construction: Stainless Steel casing and fasteners Fibreglass reinforced PE, PP or Ryton internals EPDM or Viton elastomers Suction lift to 6m (based on water and after initial priming) 1 1 2" & 2" connections BSP / NPT Close coupled, long coupled or pedestal mounted Petrol Engine, Electric Motor, hydraulic or pneumatic drive Built in check-valve 25 SERIES I HEAD (m) Electric 2850 Petrol LPM

33 03-5 Dimensions, Motor Power and Specifications CLOSE COUPLED PUMP with ELECTRIC, HYDRALIC OR PNEUMATIC DRIVE: Port Size Max. Flow Rate MAX. TDH IN GPM LPM FT. m HP/RPM TEFC 1 1 2/ /3450 Hydraulic 1 1 2/ /3450 Pneumatic 1 1 2/ / Stainless steel housing, PP internal parts and fasteners, 316 SS housing clamp Optional Viton elastomers Includes PP base plate on electric models/ Steel base plate on hydraulic and pneumatic models Pedestal mounted available Built in check valve and double flush volute PUMP with GASOLINE ENGINE DRIVE Port Size Max. Flow Rate MAX. TDH IN GPM LPM FT. m 1 1 2/ stainless steel housing, polypropylene internal parts 316 stainless steel housing clamp, stainless steel internal fasteners and EPDM elastomers Pump mounted on base rails with carrying handle Engine shaft shielded with heat shrink polyethylene tubing Built in check valve and double flush volute

34 03-6 SERIES S SELF-PRIMING CENTRIFUGAL PUMP SELF-PRIMING CENTRIFUGAL PUMPS FOR TRANSFER AND RECIRCULATION Refer to Serfilco bulletin P-630 for full technical details Contact your local Serfilco sales office and quote S series Flows to 845lpm or 25m head at 50hz operation Choice of corrosion resistant materials: Glass Reinforced Polyester (GRP) Polypropylene Ryton 316ss Internal hardware Non-metallic solution contact models are available Will re-prime to 7m Close coupled with various options: Electric Motor Petrol Engine Hydraulic Drive Pneumatic Drive Also available as long-coupled pedestal mounted pump Built in check-valve BSP and NPT threads available SERIES S A H HEAD (m) C E I J F L LPM

35 03-7 Dimensions, Motor Power and Specifications & 2 Pumps to 3.0 HP (3 Phase) 48 DISCHARGE, 2" FEMALE BSP KW KW SUCTION, 2" FEMALE BSP 299 3KW KW & 3 Pumps 5.0 HP (3 Phase) Glass reinforced polyester with 316 stainless steel internal fasteners and 304 SS external fasteners Viton, Buna or EPDM elastomers available Polypropylene base plate Choice of port size and impeller Typical applications include waste treatment, chemical/solution transfer and emergency/ back-up pump All pumps include a built in check valve and a self cleaning volute

36 03-8 SERIES T SELF-PRIMING CENTRIFUGAL PUMP HORIZONTAL LONG OR CLOSE COUPLED FOR WATER AND SALT WATER APPLICATIONS Refer to Serfilco bulletin P-632 for full technical details Contact your local Serfilco sales office and quote T series Flows to 1198lpm or head 8.6mTDH (electric driven at 50Hz) Flows to 1360lpm or head 25.3m TDH (petrol engine driven) Corrosion resistant materials of construction: Rugged Glass Re-enforced Polyester casing Buna-N elastomers Stainless Steel fasteners Suction lift 7m 2" & 3" threaded connections Close coupled (Petrol engine) Long coupled (electric motor) Pedestal mounted for flexible coupling Built in check-valve SERIES T HEAD (m) LPM B D K M

37 03-9 Dimensions, Motor Power and Specifications FLOW CURVE PORT SIZE MAX. FLOW 3800 RPM MAX. TDH 3800 RPM SHIP. WT IN. GPM LPM FT. m LBS MODEL Number GASOLINE ENGINE HORSEPOWER REQUIRED / RPM PEDESTAL (CAST IRON) MODEL PCN B TE2BBB.61 / CSS P D TE3DBB.9 / CTSS P3 K TE2KBB 4.0 / CSS P M TE3MBB 6.0 / CTSS P3 Dimensions Suction Discharge A B C D E F G H K L M N O P TE2 2"NPT 2"NPT TE3 3"NPT 3"NPT Ideal for general service on water, salt water and mildly corrosive liquids containing solids Will pass a solid 1/3 of the diameter of the suction port Tough non-metallic impeller, 316 stainless steel internal fasteners and 304 stainless steel quick release housing clamp Glass reinforced polyester housing Buna-N O-Rings and Gasket Built in check valve and self clearing volute Engine driven pumps include heavy duty engine with dual element air cleaner, threaded pipe fittings, suction strainer, carrying handle and spring mounted base rails

38

39 V e r t i c a l Pumps

40

41 04-1 Introduction to Veritcal Pumps Serfilco's range of vertical sealess and bearingless pumps provide outstanding flow and head characteristics along with excellent chemical compatibility giving rugged, reliable and cost effective performance.

42 04-2 SERIES E STAINLESS STEEL VERTICAL PUMP HIGH EFFICIENCY AND LOW ENERGY USAGE FOR HOT CORROSIVE CHEMICALS, ARDROX FORMULATIONS, CLEANERS, CAUSTICS AND PERMANGANATES Refer to Serfilco bulletin P-630 for full technical details Contact your local Serfilco sales office and quote E series Flow rates to 550 l/min at 50Hz Pressures to 3 bar / 28m Constructed from wrought and cast 316L Stainless Steel Shaft vapour seal protects motor bearing and atmosphere Run dry continuously with out failure as there are no bearings or seals Install in or out of tank 50Hz Metric IP55 Cast Iron Motors with oversized front bearings Flange connections PTFE encapsulated EPDM gaskets SERIES E 35 HEAD (m) E03/ 4SS E01SS E01SS LPM

43 04-3 Dimensions, Motor Power and Specifications MODEL ESS1 ESS1 1/2 HP suc. DISCH. DIMENSIONS Inches WEIGHT NPT (ln.) A B C D E F Lbs.(kg.) (27) 63 (28) 69 (31) 85 (39) 63 (28) 80 (36) 85 (38) 88 (40) High efficiency semi-open impeller Optional heavy duty mounting plate Must be used inside the tank Available in 50hz or 60hz (230/460/3/50-60) Typical applications include fume scrubbing sump draining, chemical pumps, transferring printed circuit board wet processing or for cleaning solutions Available in 316 Stainless Steel or Cast Iron

44 04-4 SERIES EF VERTICAL PUMP HIGH FLOW & HIGH TDH WITH HIGH EFFICIENCY AND LOW ENERGY USAGE Refer to Serfilco bulletin P-316B for full technical details Contact your local Serfilco sales office and quote EF series Flows to 1200lpm or 41m head at 50hz Non-metallic solution contact: CPVC PPP Viton or EPDM Elastomers Pump has no bearings and can run dry indefinitely Chemical Duty Motor with 2 part epoxy finish and stainless steel shaft Heavy duty PTFE Shaft Vapour seal protects motor bearings Centrifugal - quiet and vibration free In or out of solution installation Will replace most OEM pumps Choice of 355mm or 432mm column BSP or NPT Connections available Optional Discharge Pipework SERIES EF HEAD (m) LPM EF1 EF2 EF3 EF4 EF5

45 04-5 Dimensions, Motor Power and Specifications 4KW = KW = KW = KW = " NPT OR BSP OR 429 3/4" FNPT 283 BOTTOM VIEW 330 DIA 3" FNPT OPTIONAL DISCHARGE PIPE ASSEMBLY Pump Body CPVC or PP Pump Column CPVC or PP Impeller and Sleeve assembly - CPVC or PP Elastomers EPDM or Viton Mounting Plate CPVC or PP Optional Titanium Shaft Optional Discharge Pipework CPVC or PP Optional Strainer PP Optional Suction Extension CPVC or PP 300mm to 900mm Optional Motors 4kw to 11kw rpm 1450rpm 60Hz optional (see bulletin for 60hz curve) 3450rpm 1725rpm

46 04-6 SERIES EO VERTICAL PUMP EFFICIENT AND DEPENDABLE PERFORMANCE FOR ACIDS CAUSTICS CLEANERS PCB PLATING WATER EFFLUENT Refer to Serfilco bulletin P-312J for full technical details Contact your local Serfilco sales office and quote EO series Flows to 300lpm or 15m head at 50hz Non-metallic solution contact: CPVC PPP 100% PVDF Viton or EPDM Elastomers Runs-Dry - no seals no bearings Chemical Duty Motor with 2 part epoxy finish and stainless steel shaft Shaft Vapour seal protects motor bearings Centrifugal - quiet and vibration free In or out of solution installation Will replace most OEM pumps SERIES EO HEAD (m) EO1 EO2 EO3 EO4 LPM

47 04-7 Dimensions, Motor Power and Specifications H I DISCHARGE L D C MAX LEVEL B WEEP HOLE A E J MIN LEVEL K F G SUCTION BOTTOM VIEW SERIES EO DIMENSIONS EO1 EO1.25 CPVC PP PVDF CPVC PP PVDF A B C D E F G HP 124 N/A H 0.75HP N/A HP N/A HP 210 N/A I 0.75HP N/A HP N/A 245 J K L MIN LEVEL MAX LEVEL SUCTION 1-1 4" FEMALE NPT 1-1 2" FEMALE NPT DISCHARGE 1" FEMALE NPT 1-1 4" FEMALE NPT WEEP HOLE 1 2" FEMALE NPT 1 2" FEMALE NPT THE PUMP SHOWN IS FITTED WITH THE OPTIONAL DISCHARGE PIPE ASSEMBLY, TERMINATING IN A MALE NPT THREAD The semi-enclosed bottom impeller provides efficient flow performance at low horsepower Titanium shaft and fasteners available Optional discharge pipe assembly and 18 suction extension (PP, CPVC and PVDF) PP, CPVC, ECTFE or PVDF suction strainer available Typical Applications: Fume scrubbing, PCB wet processing, out-of-tank pumping and filtration, and sump draining and waste treatment

48 04-8 SERIES EO 3 4 VERTICAL PUMP PLATING WET PROCESSING ACIDS CHEMICALS FUME SCRUBBERS and CLEANING SOLUTIONS Flows to 70 LPM or 5m 50 Hz, 22 U.S GPM or 24 FT. 60 Hz Non-metallic solution contact -PP high temperature polypropylene construction, CPVC or PVDF Shaft vapour seal protects motor bearing Runs dry no bearings Chemical duty motor (0.09 kw) Centrifugal quiet, vibrationfree In or Out-of-tank installation NPT connections Refer to Serfilco bulletin P I for full technical details Contact your local Serfilco sales office and quote EO 3 4 series 6 5 SERIES EO 3 4 HEAD (m) LPM

49 04-9 Dimensions, Motor Power and Specifications MATERIAL MODEL 1/8 HP MOTOR VOLTAGE PP, EPDM EO 3 4PPL2-C1/ /1/50-60 CPVC, EPDM EO 3 4CL2-C1/8 TEFC,MOTOR WITH 8FT. CORD PVDF, Viton EO 3 4KV2-C1/8 AND 3 PRONG PLUG CONNECTIONS SUCTION DISCHARGE 1 F NPT 3 4 M NPT Typical applications include; fume scrubbing, PCB wet processing, out-of-tank pumping and filtration, sump draining and waste treatment, skimming in tank and mixing, agitating or transfer pumping. The cantilevered shaft eliminates bearings and pump seals A compound impeller prevents liquid from rising into the column The pump will self prime when liquid is at impeller level Features a cantilevered, sleeved stainless steel shaft Optional suction strainer assembly, 18 suction extension and discharge pipe assembly are available

50 04-10 SERIES HB VERTICAL SUMP PUMP HIGH EFFICIENCY AND LOW ENERGY USAGE FOR WASTES ACIDS PLATING CHEMICALS Refer to Serfilco bulletin P-302 for full technical details Contact your local Serfilco sales office and quote HB series Flows to 450lpm and heads to 28m at 50hz Corrosion resistant CPVC construction with graphite or Roulon bearings and ceramic liners. Viton or EPDM elastomers Hastelloy and Titanium fasteners available Pump lengths 610mm / 915mm / 1220mm / 1524mm Chemical Duty Motor with 2 part epoxy finish and stainless steel shaft Shaft Vapour seal protects motor bearings Centrifugal - quiet and vibration free BSP or NPT connections Water or Product lubricated bearings HEAD (m) SERIES HB LPM

51 Dimensions, Motor Power and Specifications HORSE POWER RPM NEMA A 60 Hz FRAME mm mm TCZ TCZ TCZ TCZ Typical applications include: Chemical transfer, storage tanks, deep standby pumping (when priming not possible) and sump draining and water treatment. Standard CPVC construction (high temperature models are available) EPDM and Viton elastomers Stainless steel shaft sleeved in CPVC offers unmatched strength and chemical resistance The bearing liner is made of a special fluoride-resistant ceramic Optional 2 suction extension available Available with option of Viton O-Rings and Hastelloy bearing fasteners

52

53 OTHER PUMPS

54

55 05-1 Other Pumps Serfilco's XXXXXXX.

56 05-2 SERIES AOD AIR OPERATED DIAPHRAGM PUMPS 1 4" up to 2" Sizes Wide Selection of Materials: 316ss, PP, Aluminium, PDVF, Conductive Nylon, Nylon Teflon, Nitrile, EPDM, Viton Patented Lube free air system Will not stall at low speeds Self priming Runs Dry PUMP ANYTHING THAT CAN POUR SAFELY AND RELIABLY HANDLE SOLIDS UP TO 6.4M BAND CLAMP AND BOLTED DESIGN 1 4" pumps flows to 15lpm and 70m head 3 8" pumps flows to 35lpm and 83m head 1 2" pumps flows to 50lpm and 83m head 1" pumps flows to 145lpm and 70m head 1 1 2" pumps flows to 340lpm and 83m head 2" pumps flows to 550lpm and 83m head SIZES FROM 1 4" UP TO 2" METAL AND PLASTIC OPTIONS Refer to Serfilco bulletin P-605 for full technical details Contact your local Serfilco sales office and quote AOD series

57 05-3 Dimensions, Motor Power and Specifications Bolted Models Wetted Housings Material of Construction Diphragm Elastomers / Valve Seats 1 4" 1 2" 1" 1 1 2" 2" 0-16 l/m (4 GPM) 0-65 l/m (14 GPM) l/m (41 GPM) l/m (130 GPM) l/m (180 GPM) Geolast / Nitrile YES YES YES YES YES Polypropylene PTFE YES YES YES YES YES Santoprene/EPDM YES YES YES YES YES Vitron - YES YES - - Nylon PTFE YES YES Conductive Nylon PTFE YES YES PTFE YES YES YES YES YES PVDF Santoprene/EPDM YES YES YES YES YES Vitron - YES YES YES YES Geolast / Nitrile - YES YES YES YES Aluminium PTFE/Nylon - YES YES YES YES Santoprene/EPDM - YES YES YES YES PTFE - YES YES YES YES Stainless Steel Santoprene/EPDM - YES YES YES YES Geolast / Nitrile - YES YES YES YES Band Clamp Models Wetted Housings Material of Construction Diphragm Elastomers / Valve Seats 1 4" 1 2" 1" 0-34 l/m (9 GPM) 0-65 l/m (14 GPM) l/m (41 GPM) Geolast / Nitrile YES YES YES Polypropylene PTFE YES YES YES Santoprene/EPDM YES YES YES Conductive Nylon PTFE YES - - PVDF PTFE YES YES YES Santoprene/EPDM YES - - Geolast is a nitrile blend and is a replacement for Buna-N or Neoprene Santoprene is an EPDM blend Aluminium pumps have PP valve seats, except aluminium w/tfe models which have nylon valve seats All pumps built with TFE contain a backup Santoprene diaphragm All pumps are lube-free and non-stalling Optional Air pressure regulator available Ground bond cabling kit available Available with Accessory Kit for drum transfer applications

58

59 Contacts SERFILCO INTERNATIONAL Siemens Road, Northbank Industrial Estate, Irlam, Manchester, M44 5AH England PHONE: +44 (0) FAX: +44 (0) WEB: SERFILCO HEADQUARTERS 2900 MacArthur Boulevard, Northbrook, Illinois PHONE: TOLL FREE: FAX: WEB: SERFILCO (Shanghai) Chemical Equipment Co., Ltd Unit 4, No 288, Changhe Road, Putuo District, Shanghai, China PHONE: FAX: WEB: SERFILCO GmbH Am Handwerkerzentrum 1, D Monschau, Germany PHONE: FAX: S.A.R.L. Serfilco France 34 Avenue des Champs Elysees, Paris, France PHONE: +33 (0) FAX: +33 (0) SERVICE FILTRATION of CANADA, Ltd Sladeview Crescent, Units 12 & 13 Mississauga, Ontario, Canada L5L 5T1 PHONE: or (Canada only) FAX: sales@service-filtration.com WEB:

60 G l o b a l P r o d u c t s, Local Service & Advice You Can Rely On SERFILCO INTERNATIONAL LTD Siemens Road, Northbank Industrial Estate, Irlam, Manchester, M44 5AH England PHONE: +44 (0) FAX: +44 (0) sales@serfilco-international.com WEB: