Air Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan

Transcription

1 Air Powered Double Diaphragm Pumps Polypropylene Pumps Made In Japan

2 Presenting YTS Double Diaphragm Pumps Made In Japan Fully Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast to Service Bolted Construction & Torqued New Coil Spring Air Motor Extremely Reliable Operation Common Footprint & Dimensions Compact & Robust Patent Pending D500AS (Pictured) 2 Aluminium Pump 730 L/min Max Flow Rate AODD Pump Characteristics Powered by Compressed Air Can Dry Run. Can pump against a Closed Discharge Line. Have Variable Flow Rates Have Variable Discharge Pressures. Can Pump Liquid Slurries. Are Self Priming. Can handle a Wide Variety of Liquids. Are considered Explosion Proof. Are Shear Sensitive. Very Simple to Install & Operate Air Powered Double Diaphragm Pumps Manufactured in Japan with Superior Quality & Finish. Designed for High Performance Operation & Long Life Expectancy. Fully Engineered with Design Features not often found in other brands.

3 Material Line-up. The YTS Polypropylene pump line-up is available in 3 types of Polypropylene: pure Polypropylene, glass filled Polypropylene, and carbon filled Polypropylene. Pure Polypropylene. Pure PP is a low cost thermoplastic polymer with a moderate level of tensile and flex strength. PP resists strong acids and alkalis however can be attacked by some strong chemicals such as chlorine, fuming nitric acid and other strong oxidizing agents. PP can creep over time due to pressure and temperature variations. PP is often used for applications where there is a need to resist moderately harsh chemicals and is used especially for the production, storage and transfer of moderately corrosive fluids. Pure PP is not electrically conductive. *Refer to MSDS and chemical compatibility charts or for more information about PP chemical compatibility. YTS Pure PP Pump Design Features Manufactured from High Grade Pure Homogenous Type Polypropylene. Has higher chemical resistance compared to PPG and other types of cheaper PP material. YTS PP pumps are specifically designed to resist creep with special leak resistance features built in. Glass Filled Polypropylene. PPG has a lower level of chemical resistance compared to Pure PP however has increased tensile strength offering increased creep resistance for improved leak free operation. PPG can be better at handling pressure and temperature variations and is better suited to handling abrasive particle laden fluids. PPG is not electrically conductive. Carbon Filled Polypropylene. Electrically Conductive Polypropylene Plastic is recommended for transferring flammable corrosive liquids or for operation in explosive environments. As above it has moderately high chemical resistance. Conductive PP can be ATEX certified in some cases. *Refer to ATEX certification for more information. Pump Model Nomenclature. The Looped C Spool YTS has developed the new Looped C Spool offering improved switching reliability and longer parts life expectancy. The Looped C Spool also has fully replaceable Seal Rings and a new lightweight Shaft. The Sleeve has also been redesigned offering increased wear resistance and increased surface smoothness. This Spool & Sleeve are outside accessible and completely Non-lubricated.

4 D050PT-PP ¼ Air Powered Double Diaphragm Pumps Maximum flow rate: 11.5 L/min Material Options: Pure PP & PPG Optional PPG Model. D050 Polypropylene Pump Series 11.5 L/min. (3.1 GPM) Maximum Solids Size: Flat Valve = 0 mm. Ball Valve = 0.5mm Description: Wetted Body Material Options: MPa ( PSI) Ryton Air Motor (PPS), Looped C Spring Air Spool, Flat (Standard) or Ball Check Valves, Multi Port Liquid Connections. Internal Silencer. Fully Bolted Body. ¼" (6mm) Threaded Connections PT PP, PPG. PTFE for all Models CE. Filter Regulator. Filter Regulator Lubricator. Bolt Caps. Z. O. or NPT connection options Etc. Notes: Compact size. New footprint. Grease or oil Lubrication is not necessary during normal operation. Looped C for improved reliability. Multi Ports standard on PP model. Model PP PPG Air Motor PPS PPS Wetted Parts PP PPG DIAPHRAGMS PTFE PTFE FLAT VALVES PTFE PTFE O-RINGS PTFE PTFE VALVE SEATS PP PPG VALVE GUIDES PP PPG CENTRE DISKS PP PPG Note: D050 series pumps are also available in a range of other materials including SUS, PVDF & Aluminium.

5 D100P -PP ⅜ Air Powered Double Diaphragm Pumps Maximum flow rate: 18 L/min Material Options: Pure PP & PPG Optional PPG Model. D100 Polypropylene Pump Series Maximum Solids Size: 18 L/min. (4.8 GPM) Ball Valve = 1mm MPa ( PSI) Aluminium Air Motor (Al), Spring-less Air Spool, Ball Check Valves, Multi Port Liquid Connections. External Silencer. Fully Bolted Body. ⅜" (10mm) Threaded Connections PT. PP, PPG. PTFE, TPO, TPEE, NBR, CR. CE. Filter Regulator, Filter Regulator with Auto Drain, Filter Regulator Lubricator. ½ C, NPT, Z connection options. Notes: Compact size. suitable for frequent start stop, dead head & high back pressure type applications. Available in PPG and new PP body materials. Lubrication not necessary during normal operation. Multi ports standard on PP model. Model PP (PTFE) PPG (PTFE) Air Motor ADC 12 ADC 12 Wetted Parts PP PPG DIAPHRAGMS PTFE PTFE BALL VALVES PTFE PTFE O-RINGS PTFE PTFE VALVE SEATS PP PPG VALVE GUIDES PP PPG CENTRE DISKS PP PPG

6 D102P ⅜ Air Powered Double Diaphragm Pumps Maximum flow rate: 24 L/min Material Options: PPG only. D102 Polypropylene Pump Series Maximum Solids Size: 24 L/min. (6.3 GPM) Ball Valve = 1mm MPa ( PSI) Ryton Air Motor (PPS), C-Spring Air Spool, Ball Check Valves, Side Port Liquid Connections. External Silencer. Fully Bolted Body. ⅜" (10mm) Threaded Connections PT. PPG. PTFE, TPO, TPEE, NBR, CR. CE. Filter Regulator, Filter Regulator with Auto Drain, Filter Regulator Lubricator, PTFE Balls. NPT, etc. Notes: Old model only in PPG. Chemically resistant air section (PPS). Compact size. Lubrication not necessary during normal operation. Old model however still available. Model PPG (PTFE) PPG (TPO) Air Motor PPS PPS Wetted Parts PPG PPG DIAPHRAGMS PTFE TPO BALL VALVES PTFE EDPM O-RINGS PTFE EDPM VALVE SEATS PPG PPG VALVE GUIDES PPG PPG CENTRE DISKS PPG PPG

7 D150P ½ Air Powered Double Diaphragm Pumps Maximum flow rate: 28 L/min Material Options: PPG D150 Polypropylene Pump Series 28 L/min. (7.39 GPM) Maximum Solids Size: Flat Valve = 0 mm. Ball Valve = 1mm MPa ( PSI) Aluminium Air Motor (Al), Spring-Less Air Spool, Flat or Ball Check Valves, Side Port Liquid Connections. External Silencer. Fully Bolted Body. ½" (15mm) Threaded Connections PT. PPG. PTFE, TPO, TPEE, NBR, CR. CE. Filter Regulator, Filter Regulator with Auto Drain, Filter Regulator Lubricator. Z, NPT connections etc. Notes: suitable for frequent start stop, dead head & high backpressure type applications. Lubrication not necessary during normal operation. Both ball and flat check valve pumps are available. Old design however still available. Model PPG (PTFE) PPG (TPO) Air Motor ADC 12 ADC 12 Wetted Parts PPG PPG DIAPHRAGMS PTFE TPO FLAT / BALL VALVES PTFE O-RINGS PTFE EDPM VALVE SEATS PPG PPG VALVE GUIDES PPG PPG CENTRE DISKS PPG PPG PTFE (FLAT) EDPM (BALL) Note: D150 series pumps are also available in POM.

8 D151P ½ Air Powered Double Diaphragm Pumps Maximum flow rate: 50 L/min Material Options: PPG D151 Polypropylene Pump Series 50 L/min. ( 13.2 GPM) Maximum Solids Size: Flat Valve = 0mm Ball Valve = 1 mm MPa ( PSI) Ryton Air Motor (PPS), C-Spring Air Spool, Flat or Ball Check Valves, Side Port Connections. Internal Silencer. Fully Bolted Body. ½ (15mm) Threaded Connections. PT PPG. PTFE, TPO, TPEE, NBR, CR. CE. Filter Regulator, Filter Regulator with Auto Drain, Filter Regulator Lubricator, Z, NPT connections Etc. Notes: Old model superseded by the new D152 Series however still available and in various materials. Lubrication not necessary during normal operation. Model PPG (PTFE) PPG (TPO) Air Motor PPS PPS Wetted Parts PPG PPG DIAPHRAGMS PTFE TPO FLAT / BALL VALVES PTFE O-RINGS PTFE EDPM VALVE SEATS PPG PPG VALVE GUIDES PPG PPG CENTRE DISKS PPG PPG PTFE (FLAT) EDPM (BALL) Note: D151 series pumps are also available in a range of other materials including SUS, PVDF & Aluminium.

9 D152P -PP ½ Air Powered Double Diaphragm Pumps Maximum flow rate: 56 L/min Material Options: Pure PP. Carbon Filled PP D152 Polypropylene Pump Series 56 L/min. (14.8 GPM) Maximum Solids Size: Flat Valve = 0mm. Ball Valve = 2mm MPa ( PSI) Polypropylene Air Motor (PPG), Looped C Spring Air Spool, Flat or Ball Check Valves, Multi Port Liquid Connections (as standard). Internal Silencer. Fully Bolted Body. Multi Footprint options. ½ (15mm) Threaded Connections PT Multi-Ports. PP. Carbon filled PP. PTFE, TPO, TPEE, NBR, CR, EDPM. CE. ATEX (Carbon filled PP version). Filter Regulator, Filter Regulator Lubricator, Santoprene Backup Diaphragms. NPT, Drum pumps Etc. Notes: New model available in all materials. Very high flow rates. Large solids size. Low air consumption. Multiport liquid connections. Standardized body dimensions, multi footprint and common dimensions. Lubrication not necessary during normal operation. PPG air motor for increased chemical resistance. Looped C for increased reliability. Model PP (PTFE) PP (TPO) Air Motor PPG PPG Wetted Parts PP PP DIAPHRAGMS PTFE TPO FLAT / BALL VALVES PTFE O-RINGS PTFE EDPM VALVE SEATS PP PP VALVE GUIDES PP PP CENTRE DISKS PP PP PTFE (FLAT) EDPM (BALL) Note: D152 series pumps are also available in a range of other materials including SUS, PVDF & Aluminium. This model is also available in electrically Conductive Carbon filled PP.

10 D202P -FL 3/4 Air Powered Double Diaphragm Pumps Maximum flow rate: 120 L/min Material Options: PPG. Optional Threaded Connections D202 Polypropylene Pump Series 120L/min (31.7 GPM) (Rubber Version) Maximum Solids Size: 2 mm MPa ( PSI) Model PPG (PTFE) PPG (TPO) Air Motor PPG PPG Wetted Parts PPG PPG Polypropylene Air Motor (PPG), Looped C Spring Air Spool, Ball Check Valves, Side Port Liquid Connections. External Silencer. Fully Bolted Body. 3/4 (20mm) Flange or Threaded Connections. DIN/PT PPG. PTFE, NBR, TPEE, FKM, TPO, EDPM, CR. CE. Filter Regulator, Filter Regulator with Auto Drain, Filter Regulator Lubricator, NPT, ANSI connections Etc. DIAPHRAGMS PTFE TPO BALL VALVES PTFE TPO O-RINGS PTFE EDPM VALVE SEATS PPG PPG VALVE GUIDES PPG PPG CENTRE DISKS PPG PPG Notes: 3/4 Pumps available in PPG with a PPG air motor section for high chemical resistance. Available with both threaded or flange connections. Lubrication not necessary during normal operation. Also available with NPT threaded & ANSI Flange connections.

11 D252P -FL 1 Air Powered Double Diaphragm Pumps Maximum flow rate: 165 L/min Material Options: PPG, Carbon Filled PP. Optional Threaded Connections D252 Polypropylene Pump Series Maximum Solids Size: 165L/min (43.6 GPM) 3 mm MPa ( PSI) Polypropylene Air Motor (PPG), Looped C Spring Air Spool, Ball Check Valves, Side Port Liquid Connections. External Silencer. Fully Bolted Body. New Multi Footprint Design. 1 (25mm) Flange or Threaded Connections. DIN/PT PPG. Carbon Filled PP PTFE, EDPM, TPEE, FKM, TPO, NBR, CR. CE. ATEX. (For Carbon filled PP model) Filter Regulator. Filter Regulator Lubricator. Santoprene Backup Diaphragms Etc. Notes: 1 Pumps available in PPG, Carbon PP and with a PPG air motor section for high chemical resistance. Available with both threaded or flange connections. Lubrication not necessary during normal operation. Also available with NPT threaded & ANSI Flange connections. Model PPG (PTFE) PPG (TPO) Air Motor PPG PPG Wetted Parts PPG PPG DIAPHRAGMS PTFE TPO BALL VALVES PTFE EDPM O-RINGS PTFE EDPM VALVE SEATS GFRPP GFRPP VALVE GUIDES PPG PPG CENTRE DISKS PPG PPG Note: D252 series pumps are also available in PVDF.

12 D500P -FL 2 Air Powered Double Diaphragm Pumps Maximum flow rate: 620 L/min Material Options: PPG D500 Polypropylene Pump Series Maximum Solids Size: 620 L/min (163.8 GPM) (Rubber Diaphragm Version) 8 mm MPa ( PSI) Aluminium Air Motor Section, New Coil-Spring Air Motor, Ball Check Valves, External Silencers (2). Fully Bolted Body. Multi Footprint options. 2 (50mm) Flange Connections. PPG. PTFE, CR, EDPM, NBR. TPEE, FKM, TPO. CE. Filter Regulator, Filter Regulator Lubricator, High Performance Muffler, Destroke Cushions, Carry Handles, Santoprene Backup Diaphragms, NPT Etc. Notes: High Flow Rates. Completely Non-lubricated Shuttle Valve. Pumps can operate from Very Low up to Very High Air Pressures and have up to 25% Better Air Consumption compared to previous models. Multi Footprint design. Suited to Both Start Stop & Fully Continuous pumping applications. Can easily handle High Heads and Very Long Discharge Lines. Good for Filter Press & other Dead Head type processes. Also available with NPT threaded connections. Flange models matches both DIN and ANSI. Model PPG (PTFE) PPG (TPO) Air Motor ADC12 ADC12 Wetted Parts PPG PPG DIAPHRAGMS PTFE TPO BALL VALVES PTFE EDPM O-RINGS PTFE EDPM VALVE SEATS PP PP CENTRE DISKS PPG PPG Note: D500 series pumps are also available in a range of other materials including SUS, PVDF, Aluminium and Cast Iron.

13 General Pump Maintenance. Ball Guides (4) Ball Guides are fully independent & modular and protect the Pump body from unnecessary damage. If worn out they can be easily & cheaply replaced without having to replace an entire set of pump Chambers or Manifolds. Ball Valves (4) Pumps are fitted with either Ball or Flat Valves. Ball Valves are available in a number of different materials including PTFE. D152PS-PP (Pictured) 1/2 PP Pump 56 L/min Max Flow Rate Ball Seats (4) Ball Seats are also modular & can be easily replaced if worn out. Ball Guides & Seats can also be interchanged to another material such as 316 SUS for better abrasion resistance. Spool Valve The Spool Valve is outside accessible and can be removed by hand within a few seconds. Also instead of replacing the entire valve it is possible to just change the Seal Rings (5). The Spool Valve is 100% lubrication free so no grease or oil is required under normal operating conditions. Spool Sleeve The Spool Sleeve is Modular, replaceable and is 100% outside accessible. The Sleeve is manufactured from an extremely hard wearing and extremely smooth material allowing it to have an extended life expectancy. The Sleeve is designed to protect the Air Motor Assembly from unnecessary abrasion damage. Pilot Valves (2) Although considered a non wearing component from time to time the Pilots may need to be changed. When changing the Pilots note that they are fully modular and operate independently. Each valve is also contained within a hard wearing and replaceable plastic Seat which protects the Air Motor Assembly from unnecessary wear and tear. Throat Bearings (2) The removable Throat Bearings contain & stabilize the Center Rod and are made from hard wearing plastic. This component is used to protect the Center Rod & also protect the pumps Air Motor Assembly from unnecessary wear & tear. Maintenance Features Built into every YTS Pump Diaphragms (2) Diaphragms are usually the hardest wearing component and are also available in a range of different materials. Bolted construction and can be easily and quickly disassembled and reassembled. All wearing surfaces are modular and are replaceable. Extensive use of High tech abrasion resistant plastics and metals. No special tools required for service. Pumps are non-lubricated. Air motor is outside accessible. Pumps are fitted with an external air motor reset switch. No form fit or matched components. Pumps can be easily torqued and re torqued over time. Many common parts used on different model pumps. For more information contact YTS Co Ltd: sales@yts-pump.com

14 Notes: Products & specifications contained within this catalogue may be changed without notice. Pumps listed are available in various sizes and materials. For each application please take extreme care with pump choice and always consider factors such as chemical compatibility, solids size, abrasion resistance, temperature of the liquid, temperature of the surrounding atmosphere, airline or liquid line pressure etc. Always refer to MSDS and chemical compatibility charts or for more information about chemical compatibility. For more information on choosing the correct pump, please consult with your distributor or contact YTS directly. Note that products contained may be subject to international trade restrictions or embargoes and may require an export permit from the Japan Ministry of Economy and Industry (METI) prior to dispatch. For more information regarding international export control regulations please contact your distributor or YTS directly. For information regarding re-export please contact your local authorities directly. For information regarding CE & ATEX refer to the CE and ATEX certification available separately. Countries where YTS patents were applied: Japan, China, Korea, USA, Italy, Denmark, France, Germany, Netherlands, Sweden, and England. Contact: YTS Co Ltd. Address: , Monoi, Yotsukaido City, Chiba, Japan Phone: +81 (0) Mail: Web: yts-pump.com YTS Patent History 12 Patents (Now Expired). 6 Design Patents (Current). 4 Patents Pending. Copyright YTS Co., Ltd. All rights reserved.