SETHCO SEALLESS, SELF-PRIMING, MAGNETIC DRIVE CENTRIFUGAL PUMPS

Transcription

1 SETHCO SEALLESS, SELF-PRIMING, MAGNETIC DRIVE CENTRIFUGAL PUMPS For Corrosive Liquids and Chemical Transfer PVDF Version Polypropylene Version

2 SETHCO SEALLESS, SELF-PRIMING MAGNETIC DRIVE CENTRIFUGAL PUMPS FOR CORROSIVE LIQUIDS AND CHEMICAL TRANSFER Polypropylene Model 14 PMSP DESIGN FEATURES APPLICATIONS TYPICAL PMSP SERIES ASSEMBLY DRAWING

3 5 SERIES FOR FLOWS TO 7 GPM (1 LPM), HEADS TO 36 FT. (11 M) Composite Curves M 1.1 FT (6 hz) HEAD FLOW GPM (6 hz) LPM Dimensions A 1'' MNPT DISCHARGE 1 3/8'' 1 3/16'' 1 7/8'' B 4'' M 1'' MNPT INLET 6 1/'' 5/16'' 4 7/8'' 1 1/'' 3 3/4'' 9/16'' 1 1/4'' 7/16'' 1 1/'' DETAIL OF MOTOR FOOT Ø 1/4'' MOTOR/PUMP DETAILS MOTOR HP VOLTS/PHASE A B M 1/4 115V, 1 PH [58] 7 5/8 [194] 8 5/8 [19] 1/3 115V, 1 PH [58] 7 5/8 [194] 8 5/8 [19] 1/ 3/4 5 5/8'' 115V, 1 PH 8-3/46 3PH 115V, 1 PH 8-3/46 3PH 3 1/4'' NOTES: Motor dimensions may vary by manufacturer. 3 1/4'' 1 1/8 [537] 5/8 [54] 1/8 [56] 1/8 [56] 1/16'' 3 1/'' 9 1/4'' 11 7/8'' 8 3/8 [13] 7 5/8 [194] 9 1/8 [3] 8 3/8 [13] 8 7/8 [5] 8 7/8 [5] All dimensions in inches. Dimensions in [ ] are millimeters. Pump Specifications: 6 Models Available Model Number Polypropylene PVDF Max Flow Max Head Max Operating Temperature Motor Characteristics* Weight (Lbs./Kg.) GPM LPM Ft. M HP* Volts Hz Phase Type Lbs. Kg. PMSP-51 KMSP Polypropylene: 18 F / 8 C 1/4 1 PH PMSP-55 KMSP /3 3/ PH TEFC PMSP-55 KMSP PVDF: 1 F / 99 C 1/ 1 & 3 PH * Customer supplied overload protection is required on 3 phase motors. Consult Factory for the following options: 5 Hz. motors, explosion proof motors, and alternate motor HPs. Add approximately 3 lbs./1.4 kg. for PVDF. Add approximately % extra for shipping weight.

4 1 SERIES FOR FLOWS TO 76 GPM (88 LPM), HEADS TO 66 FT. ( M) Composite Curves M FT (6 hz) W/14HG 15 HEAD N GPM (6 hz) FLOW LPM Dimensions A 14'' 1/4'' 5'' M 1 1/4'' ''* 5/16'' *Use only on HP and up. 3'' 3 3/4'' 6 1/'' 9/16'' 4 7/8'' 6 1/'' 13 3/4'' MOTOR/PUMP DETAILS MOTOR HP VOLTS/PHASE A B M 1/ 3/ /'' B 13 5/8'' 1 1/'' 115V, 1 PH 3/8 [568] 8 3/8 [13] 8-3/46V, 3 PH 1 5/8 [549] 7 5/8 [194] 115V, 1 PH 3 1/8 [587] 9 1/8 [3] 8-3/46V, 3 PH 3/8 [568] 4 7/8 [14] 8 3/8 [13] 115V, 1 PH 3 5/8 [6] 9 5/8 [44] 8-3/46V, 3 PH 3 3/8 [594] 9 3/8 [38] 8-3/46V, 3 PH 4 1/4 [616] 1 1/4 [6] 3 8-3/46V, 3 PH 5 3/4 [654] 5 1/4 [133] 11 3/4 [98] NOTES: Motor dimensions may vary by manufacturer. INLET/DISCHARGE DIAMETER INLET DISCHARGE MODEL DIA. DIA /4'' FNPT 1 1/4'' FNPT /'' FNPT 1 1/'' FNPT All dimensions in inches. Dimensions in [ ] are millimeters. Pump Specifications: 1 Models Available Model Number Polypropylene PVDF Max Max Flow Max Head Motor Characteristics* Weight (Lbs./Kg.) Operating GPM LPM Ft. M Temperature HP* Volts Hz Phase Type Lbs. Kg. PMSP-135 KMSP / PMSP-14N KMSP-14N Polypropylene: 18 F / 8 C PMSP-14W KMSP-14W /3 6 1 & 3 PH TEFC PVDF: PMSP-14HG KMSP-14HG F / 99 C PMSP-15 KMSP PH(3/46V) * Customer supplied overload protection is required on 3 phase motors. Consult Factory for the following options: 5 Hz. motors, explosion proof motors, and alternate motor HPs. Add approximately 3 lbs./1.4 kg. for PVDF. Add approximately % extra for shipping weight.

5 5 SERIES FOR FLOWS TO 3 GPM (87 LPM), HEADS TO 93 FT. (8 M) Composite Curves M FT (6 hz) HEAD GPM (6 hz) LPM FLOW Dimensions '' MNPT DISCHARGE A 3/8'' 6 1/16'' 3/4'' D M 1/'' MNPT INLET C B G H F P Ø 7/16'' 6 HOLES 18 5/8'' E DETAIL OF MOTOR FOOT MOTOR/PUMP DETAILS MOTOR HP VOLTS/PHASE A B C D E F G H M P 3 8-3/46V, 3 PH 3 1/ [86] 14 3/8 [365] 17 3/8 [441] 7 13/16 [198] 4 1/ [114] 1 [5] 7 1/ [191] 13 7/8 [353] 4 1/ [114] 5 8-3/46V, 3 PH 3 1/ [86] 14 3/8 [365] 17 3/8 [441] 7 13/16 [198] 4 1/ [114] 1 [5] 7 1/ [191] 13 7/8 [353] /46V, 3 PH 34 1/4 [87] 15 1/8 [384] 18 1/8 [46] 8 11/16 [1] 5 1/ [14] 1 1/ [38] 8 1/ [16] 15 5/8 [397] 5 1/4 [133] 1 8-3/46V, 3 PH 35 5/8 [95] 15 1/8 [384] 18 1/8 [46] 8 11/16 [1] 5 1/ [14] 1 1/ [38] 8 1/ [16] 17 [43] NOTES: Motor dimensions may vary by manufacturer. All dimensions in inches. Dimensions in [ ] are millimeters. 3 3/8 [86] 4 1/4 [18] Pump Specifications: 8 Models Available Model Number Polypropylene PVDF Max Flow Max Head Max Motor Characteristics* Weight (Lbs./Kg.) Operating GPM LPM Ft. M Temperature HP* Volts Hz Phase Type Lbs. Kg. PMSP-55 KMSP Polypropylene: PMSP-51 KMSP F / 8 C / PH TEFC PMSP-55 KMSP PVDF: PMSP-55 KMSP F / 99 C 7 1/ * Customer supplied overload protection is required on 3 phase motors. Consult Factory for the following options: 5 Hz. motors, explosion proof motors, and alternate motor HPs. Add approximately 3 lbs./1.4 kg. for PVDF. Add approximately % extra for shipping weight.

6 PRIMING TIME 5 SERIES SELF-PRIMING MAGNETIC DRIVE PUMPS METERS.3 FEET MINUTES NOTE: The above priming times are based on water (SG = 1.) using a 1'' inlet hose connected to the pump suction. Consult Factory for priming times with other fluids or different suction tubing. PRIMING TIME 1 SERIES SELF-PRIMING MAGNETIC DRIVE PUMPS METERS FEET W/14HG 14N 135N MINUTES NOTE: The above priming times are based on water (SG = 1.) using a 1-1/4'' inlet hose connected to the pump suction for all pumps except the PMSP-15. The PMSP-15 has a 1-1/'' inlet hose. Consult Factory for priming times with other fluids or different suction tubing.

7 PRIMING TIME 5 SERIES SELF-PRIMING MAGNETIC DRIVE PUMPS METERS 3. FEET MINUTES NOTE: The above priming times are based on water (SG = 1.) using a '' inlet hose connected to the pump suction. Consult Factory for priming times with other fluids or different suction tubing. METHOD OF PRIMING Priming the pump is easy. Simply fill the priming chamber with liquid through the wide opening at the top. Secure the cover and turn on the pump. When the pump is started, the impeller discharges a mixture of liquid and air into the discharge chamber. The air is separated and vented through the discharge while the liquid is returned to the impeller. This priming liquid continues to draw in more air from the suction line. The cycle continues until all air is evacuated from the suction line and replaced by the liquid to be pumped, at which time the pump is "primed".

8 Bulletin 35A ABOUT MET-PRO GLOBAL PUMP SOLUTIONS Met-Pro Global Pump Solutions, which combines the resources of the Company s internationally recognized Dean, Fybroc and Sethco brands, is a leading niche-oriented global provider of solutions and products for the pumping of corrosive, abrasive and high temperature liquids. Its broad range of high quality centrifugal pumps provide excellent performance for tough applications including pumping of acids, brines, caustics, bleaches, seawater, high temperature liquids and a wide variety of waste liquids for a broad range of applications including the chemical, petrochemical, metal finishing, wastewater treatment, desalination and aquarium/aquaculture markets. ABOUT MET-PRO Met-Pro Corporation is a global provider of solutions and products for product recovery, pollution control and fluid handling applications. The Company s products include filtration and purification equipment for air, water and harsh, corrosive applications; fluid handling equipment for water, corrosive, abrasive, and high temperature liquids; and proprietary water treatment chemicals. For more information, visit 8 E m l e n W a y, Te l f o r d, PA P : F : info@mp-gps.com 11 MET-PRO CORPORATION SETHCO IS A REGISTERED TRADEMARK OF MET-PRO CORPORATION 911