Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions

Transcription

1 Model CDU, Contents CDU, Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions CDU70/1-3/4HP CDU70/3-1 1 /2HP CDU70/5-2HP CDU120/1-1HP CDU120/3-1 1 /2HP 3 5, CDU120/5-3HP CDU200/1-1 /2HP CDU200/3-3HP CDU200/5-3HP 70/ HP 70/106-1HP 70/ HP 120/106-1HP 120/ HP /206-2HP 200/ HP 200/206-2HP 200/6-3HP *Note: Model CDU NSF/ANSI 61 Annex G listed Certified to NSF/ANSI 61, ANNEX G 0 ((803) (803) (fax) rev. 08/15

2 Model CDU Model Designation CDU CDU 70/1 7 D 1 C Model Type CDU Stainless Steel Centrifugal Speed (none) 3500 RPM RPM Casing and Impeller Size 70/1 120/1 200/1 70/3 120/3 200/3 70/5 120/5 200/5 Motor HP 7 ¾ HP 10 1 HP 15 1 ½ HP 20 2 HP 3 HP Motor Enclosure D ODP T TEFC X Explosion Proof Phase 1 Single Phase 3 Three Phase Mechanical Seal Type C Carbon/Ceramic/Viton (Cup Seat) G Carbon/Ceramic/Buna (Cup Seat) H Carbon/Ni-resist/Viton (Cup Seat) GO Carbon/Ceramic/Buna (O-Ring Seat) CO Carbon/Ceramic/Viton (O-Ring Seat) HO Carbon/Ni-resist/Viton (O-Ring Seat) EPDM Carbon/Ceramic/EPDM (Cup Seat) SCSCV Si-Carbide/Si-Carbide/Viton (O-Ring Seat) 1 (803) (803) (fax) rev. 08/14

3 Model /M Model Designation /M M 70/ 20 6 S2 MoDEl TyPE Single stage pump PhASE DESIGNATIoN M Single Phase (none) Three Phase housing AND IMPEllER NUMBER 70/ 120/ 200/ RATED hp 07 3/4 hp 10 1 hp 20 2hP 3hP hertz 6 60hz PhASE/VolT S1 single phase, 115 Volt S2 single phase, 2 Volt T2 three phase, 2/460 Volt 2 (803) (803) (fax) rev. 08/15

4 Model CDU Specifications CDU Standard Optional Size Suction Discharge Range of HP Range of Performance Capacity Head Liquid handled Type of liquid CDU /4'' NPT thread CDU /4'' NPT thread CDU /2'' NPT thread 1'' NPT thread 3 /4 HP to 3 HP 5.5 to 95 GPM at 3450 RPM 26 to 144 feet at 3450 RPM Water Temperature 212 F (100 C) Max. 250 F (121 C) with optional high temperature seal Max. working pressure 125 PSI (9 Bar) Materials Casing 4L Stainless Steel Impeller (closed type) 4L Stainless Steel Shaft Stainless Steel Bracket Aluminum Shaft Seal Mechanical Seal Type 21 High temperature version Mild chemical version Bearing Ball Bearing Direction of Rotation Clockwise when viewed from motor end Motor Type NEMA 56J Frame Speed 60 Hz, 3450 RPM (2 poles) Single Phase TEFC 3 /4 HP to 3 HP ODP 3 /4 HP to 3 HP, 115/2V Explosion proof consult factory Three Phase TEFC 3 /4 HP to 3 HP Washdown duty consult factory ODP 3 /4 HP to 3 HP, 208-2/460V Motor Protection Built-in overload protection (single phase) 3 (803) (803) (fax) rev. 05/03

5 Model Specifications Standard Optional Size Suction 1 1 /4'' NPT Thread 1 1 /2'' NPT Thread Discharge 1'' NPT Thread Range of HP 3 /4 HP to 3 HP Range of Performance Capacity 5.5 to 68 GPM at 3600 RPM Head 40 to 1 feet at 3600 RPM Liquid handled Type of liquid Clean water Temperature Maximum: 140 F (60 C) Working pressure Maximum: 8 PSI Materials Casing 4 Stainless Steel Impeller (closed type) 4 Stainless Steel Shaft 3 Stainless Steel Bracket Aluminum Shaft Seal Mechanical Seal Consult factory for additional Carbon/Ceramic/NBR seal options Direction of Rotation Clockwise when viewed from motor end Motor Type TEFC/IP55 Speed 60 Hz, 3600 RPM (2 poles) Single Phase 2V Three Phase 2/460V Motor Protection Built-in overload protection (single phase) Bearing Sealed Ball Bearing 4 ((803) (803) (fax) rev. 08/15

6 Model CDU Selection Chart Synchronous Speed 3450 RPM CDU l/min 200 Ft M /5-2HP 120/5-3HP TOTAL HEAD /3-1½HP 70/1-¾HP 120/3-1½HP 200/5-3HP 200/3-3HP /1-1HP 200/1-1½HP CAPACITY IN GPM 5 (803) (803) (fax) rev. 08/01

7 Model CDU Performance Curves CDU CDU70/1-3 /4 hp Synchronous Speed: 3450 RPM Size: 1 x 1 1 /4 x 4 1 / NPSH REQ. CURVE NO.: CD-C " NPT DISCH. x 1-1/4" NPT SUC. IMP. DIA. 4-1/2" (115mm) 1.00 SPEC. GRAVITY Ft NPSH REQ M NPSH REQ T.D.H. PUMP EFF EFFICIENCY % 10 TOTAL HEAD M TOTAL HEAD FT CAPACITY USGPM CAPACITY M 3 /MIN SHAFT POWER HP SHAFT POWER KW SHAFT POWER CDU70/3-1 1 /2 hp Synchronous Speed: 3450 RPM Size: 1 x 1 1 /4 x 5 3 / T.D.H. NPSH REQ. CUR VE NO.: CD-C " NPT DISCH. x 1-1/4" NPT SUC. IMP. DIA. 5-3/16" (132mm) 1.00 SPEC. GRA VITY Ft NPSH REQ. 4 M NPSH REQ PUMP EFF. EFFICIENCY % 1 M FT USGPM M 3 /MIN SHAFT POWER HP SHAFT POWER 0.5 KW SHAFT POWER 6 (803) (803) (fax) rev. 08/01

8 Model CDU Performance Curves CDU CDU70/5-2hP Synchronous Speed: 3450 RPM Size: 1 x 1 1 /4 x 6 3 /16 CUR VE NO.: CD-C " NPT DISCH. x 1-1/4" NPT SUC. IMP. DIA. 6-3/16" (157mm) 1.00 SPEC. GRA VITY 5 1 NPSH REQ. 1 Ft NPSH REQ. 6 4 M NPSH REQ. 1 1 T.D.H. 5 EFFICIENCY % M FT USGPM M 3 /MIN 10 8 PUMP EFF. SHAFT POWER HP SHAFT POWER KW SHAFT POWER CDU120/1-1hP Synchronous Speed: 3450 RPM Size: 1 x 1 1 /4 x 4 1 / NPSH REQ. CUR VE NO.: CD-C " NPT DISCH. x 1-1/4" NPT SUC. IMP. DIA. 4-1/2" (15mm) 1.00 SPEC. GRA VITY Ft NPSH REQ. 4 M NPSH REQ. 7 5 EFFICIENCY % 15 1 M FT USGPM M 3 /MIN 7 5 T.D.H. PUMP EFF. SHAFT POWER HP SHAFT POWER KW SHAFT POWER 7 (803) (803) (fax) rev. 08/01

9 Model CDU Performance Curves CDU CDU120/3-1 1 /2 hp Synchronous Speed: 3450 RPM Size: 1 x 1 1 /4 x 5 3 / T.D.H. NPSH REQ. CUR VE NO.: CD-C " NPT DISCH. x 1-1/4" NPT SUC. IMP. DIA. 5-3/16" (132mm) 1.00 SPEC. GRA VITY Ft NPSH REQ. 4 M NPSH REQ PUMP EFF. EFFICIENCY % 1 M FT USGPM M 3 /MIN SHAFT POWER HP SHAFT POWER 0.5 KW SHAFT POWER CDU120/5-3hP Synchronous Speed: 3450 RPM Size: 1 x 1 1 /4 x 6 3 /16 CUR VE NO.: CD-C " NPT DISCH. x 1-1/4" NPT SUC. IMP. DIA. 6-3/16" (157mm) 1.00 SPEC. GRA VITY 5 1 NPSH REQ. 1 Ft NPSH REQ. 6 4 M NPSH REQ T.D.H. 5 EFFICIENCY % M FT USGPM M 3 /MIN 10 8 PUMP EFF. SHAFT POWER HP SHAFT POWER KW SHAFT POWER 8 (803) (803) (fax) rev. 08/01

10 Model CDU Performance Curves CDU CDU200/1-1 1 /2 hp Synchronous Speed: 3450 RPM Size: 1 x 1 1 /2 x 4 1 / NPSH REQ. CUR VE NO.: CD-C " NPT DISCH. x 1-1/2" NPT SUC. IMP. DIA. 4-1/2" (15mm) 1.00 SPEC. GRA VITY Ft NPSH REQ. 4 M NPSH REQ PUMP EFF. T.D.H. EFFICIENCY % 1 M FT USGPM M 3 /MIN SHAFT POWER HP SHAFT POWER KW SHAFT POWER CDU200/3-3hP Synchronous Speed: 3450 RPM Size: 1 x 1 1 /2 x 5 3 / CUR VE NO.: CD-C " NPT DISCH. x 1-1/2" NPT SUC. IMP. DIA. 5-3/16" (132mm) 1.00 SPEC. GRA VITY T.D.H. NPSH REQ. 1 Ft NPSH REQ. 6 4 M NPSH REQ. 7 5 EFFICIENCY % 15 1 M FT USGPM M 3 /MIN 7 5 PUMP EFF. SHAFT POWER HP SHAFT POWER 0.5 KW SHAFT POWER 9 (803) (803) (fax) rev. 08/01

11 Model CDU Performance Curves CDU CDU200/5-3hP Synchronous Speed: 3450 RPM Size: 1 x 1 1 /2 x 5 11 /16 CUR VE NO.: CD-C " NPT DISCH. x 1-1/2" NPT SUC. IMP. DIA. 5-1/16" (144mm) 1.00 SPEC. GRA VITY NPSH REQ. 1 Ft NPSH REQ. 6 4 M NPSH REQ T.D.H. 5 EFFICIENCY % M FT USGPM M 3 /MIN 10 8 PUMP EFF. SHAFT POWER HP SHAFT POWER 3 KW SHAFT POWER (803) (803) (fax) rev. 08/01

12 Model CDU Selection chart Synchronous Speed 1725 RPM CDU Ft.MM l/min 15M TOTAL HEAD /5-1/3HP 200/5-1/2HP CAPACITY IN GPM (803) (803) (fax) rev. 08/01

13 Model CDU Performance Curves CDU CDU4 120/5-1 /3 hp Synchronous Speed: 1725 RPM Size: 1 x 1 1 /4 x 6 3 /16 60 Curve No: CD-C "NPT DISCH. x 1-1/4"NPT SUCTION IMP. DIA. 6-3/16" (157mm) 1.0 SPECIFIC GRAVITY NPSHR NPSHR (Ft) NPSHR (m) Efficiency (%) Total Head (m) Total Head (Ft) EFFICIENCY HEAD / CAPACITY SHAFT POWER Capacity USGPM Shaft Power (BHP) Shaft Power (kw) Capacity m 3 pm CDU4 200/5-1 /2 hp Synchronous Speed: 1725 RPM Size: 1 x 1 1 /2 x 5 11 /16 60 Curve No: CD-C "NPT DISCH. x 1-1/2"NPT SUCTION IMP. DIA. 5-11/16" (144mm) 1.0 SPECIFIC GRAVITY NPSHR NPSHR (Ft) NPSHR (m) Efficiency (%) Total Head (m) Total Head (Ft) EFFICIENCY HEAD / CAPACITY SHAFT POWER Shaft Power (BHP) Shaft Power (kw) Capacity USGPM Capacity m 3 pm (803) (803) (fax) rev. 11/01

14 Model Selection Chart TOTAL HEAD CAPACITY ((803) (803) (fax) rev. 08/15

15 Model /M Performance Curves ((803) (803) (fax) rev. 08/15

16 Model /M Performance Curves ((803) (803) (fax) rev. 08/15

17 Model /M Performance Curves ((803) (803) (fax) rev. 08/15

18 Model CDU Pump Dimensions CDU Model CDU, 2-Pole Motor Model Size Pump Size NPT (Inch) Unit Weight (lbs.) Single Phase Three Phase Suction Discharge A B ODP TEFC ODP TEFC CDU70/1-3/4HP 1 x 1 1/4 x 4 1/2 1 1/ /8 9 1/ CDU70/3-1 1/2HP 1 x 1 1/4 x 5 3/16 1 1/ /16 5/8 9 5/ CDU70/5-2HP 1 x 1 1/4 x 6 3/16 1 1/ /8 1/8 9 5/ CDU120/1-1HP 1 x 1 1/4 x 4 1/2 1 1/ /16 5/8 9 5/ CDU120/3-1 1/2HP 1 x 1 1/4 x 5 3/16 1 1/ /16 5/8 9 5/ CDU120/5-3HP 1 x 1 1/4 x 6 3/16 1 1/ /16 1/2 9 5/ CDU200/1-1 1/2HP 1 x 1 1/2 x 4 1/2 1 1/ /16 5/8 9 5/ CDU200/3-3HP 1 x 1 1/2 x 5 3/16 1 1/ /16 1/2 9 5/ CDU200/5-3HP 1 x 1 1/2 x 5 11/16 1 1/ /16 1/2 9 5/ Model CDU, 4-Pole Motor Max. Dimension (Inch) Model Size Pump Size NPT (Inch) Max. Dimension (Inch) Unit Weight (lbs.) Single Phase Three Phase Suction Discharge A B ODP TEFC ODP TEFC CDU4120/5-1/3HP 1 x 1 1/4 x 6 3/16 1 1/ /16 9 1/ CDU4200/5-1/2HP 1 x 1 1/2 x 5 11/16 1 1/ /16 9 1/ (803) (803) (fax) rev.

19 Model CDU Sectional View CDU * Part No. Part Name Material No. for 1 Unit * Casing Casing cover Bracket Impeller Impeller nut Casing ring (*CDU 70 series only) Mechanical seal O-Ring Bolt Bolt Bolt Bolt Nut Washer Washer Base Plug Motor 4L Stainless 4L Stainless Aluminum 4L Stainless 4L Stainless Viton Viton 4L Stainless 4L Stainless 4L Stainless 4L Stainless 4L Stainless 4L Stainless 4L Stainless Steel 4L Stainless (803) (803) (fax) rev. 08/14

20 Model /M Pump Dimensions Dimensions: inch Phase Model HP A B C H H1 H2 H3 (1) M M1 N N1 R V (1) W DNA Weight (lbs) 70/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 19 70/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 21 70/ /4 13 3/16 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " / /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 21 Three 120/ /4 13 3/16 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " / /4 14 1/4 7 7/8 9 1/8 4 3/ /16 2 3/16 1 9/16 5 9/16 7 3/16 4 3/16 PG11 3 3/4 1.25" / /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 7 3/16 4 1/4 PG /16 1.5" / /4 14 1/4 7 7/8 9 1/8 4 3/ / /16 5 9/16 7 3/16 4 3/16 PG11 3 3/4 1.5" / /4 14 1/4 7 7/ /16 5 1/4 9 3/8 2 3/16 1 9/16 5 9/16 7 3/16 4 3/16 PG11 3 3/4 1.5" 37 Dimensions: mm Phase Model HP A B C H H1 H2 H3 (1) M M1 N N1 R V (1) W DNA Weight (kg) 70/ PG " / PG " / PG " / PG " 9.5 Three 120/ PG " / PG " / PG " / PG " / PG " 16.9 Dimensions: inch Phase Model HP A B C H H1 H2 H4 (2) M M1 N N1 R T (2) W DNA Weight (lbs) M 70/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 19 M 70/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 21 M 70/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 26 One M 120/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 21 M 120/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG / " 26 M 120/ /4 13 3/4 7 7/8 9 1/8 4 3/ /16 2 3/16 1 9/16 5 9/16 7 1/8 4 3/16 PG /4 1.25" 34 M 200/ /4 12 3/4 7 3/16 9 1/8 4 3/ / /2 4 3/4 6 3/8 4 1/4 PG /16 1.5" 24 M 200/ /4 13 3/4 7 7/8 9 1/8 4 3/ / /16 5 5/8 7 1/8 4 3/16 PG /4 1.5" 33 Dimensions: mm Phase Model HP A B C H H1 H2 H4 (2) M M1 N N1 R T (2) W DNA Weight (kg) M 70/ PG " 8.5 M 70/ PG " 9.5 M 70/ PG " 11.7 One M 120/ PG " 9.5 M 120/ PG " 11.7 M 120/ PG " 15.3 M 200/ PG " 11 M 200/ PG " ((803) (803) (fax) rev. 08/15

21 Model /M Sectional View Parts Breakdown /M Parts Ref. Name Material QTY. Ref. Name Material QTY. 1 Casing 4 Stainless 1 25 Drain plug 3 Stainless 1 3 Motor Bracket Alum O-ring Viton 1 4 Casing cover 4 Stainless 1 32 Key 316 Stainless 1 6 Shaft with rotor 3 Stainless 1 34 Impeller nut 4 Stainless 1 7 Impeller 4 Stainless 1 42 Motor support Alum Mechanical seal Carbon/Ceramic 1 52 Terminal box (Single phase only) ABS 1 12 Motor frame 1 53 Terminal box cover ABS 1 13 Motor cover Alum Box gasket Viton 1 14 Fan PA 1 73 Casing ring 4 Stainless 1 15 Fan cover Steel 1 75 Washer 4 Stainless 1 16 Terminal board 1 76 Washer 4 Stainless 1 17 Terminal box cover (Three phase only) Alum O-ring Viton 1 18 Splash ring Viton 1 78 O-ring Viton 1 19 Pump side ball bearing 1 90 Terminal box cover gasket (Single phase) Viton 1 20 Fan side ball bearing 1 92 Lip seal 1 21 Adjusting ring Steel 1 93 Lip seal 1 22 Tie rod Steel Protector (Single phase only) 1 23 Capacitor (Single phase only) Screw 8 24 Priming plug 3 Stainless ((803) (803) (fax) rev. 08/15

22 Model /M Electrical Data 3/4 to 1 hp, Single Phase, 115V Hz Poles Phase Output (HP) Voltage (V) 60 2 Single Applicable Model M70 MOTOR MODEL 70/076 70/ /106 Output HP kw Phase Name-Plate Poles Rating Volts Amperes Speed Insulation Class F F F Capacity of Capacitor Start µf Run No Load Amperes Test Watts Resistance at 20 C Ohms Current Amp % Load Efficiency % Power Factor % Speed RPM Locked Rotor Torque LB-FT Start Current Amp Number Starts per Hour Voltage Tolerance % ± ((803) (803) (fax) rev. 08/15

23 Model /M Electrical Data 3/4 to 2 hp, Single Phase, 2V Hz Poles Phase Output (HP) Voltage (V) 60 2 Single Applicable Model M MOTOR MODEL 70/076 70/106 70/ / / / / /206 Output HP kw Phase Name-Plate Poles Rating Volts Amperes Speed Insulation Class F F F F F F F F Capacity of Capacitor Start µf Run No Load Amperes Test Watts Resistance at Ohms 20 C Current Amp % Load Efficiency % Power Factor % Speed RPM Locked Rotor Torque LB-FT Start Current Amp Number Starts per Hour Voltage Tolerance % ± ((803) (803) (fax) rev. 08/15

24 Model Electrical Data 3/4 to 3 hp, Three Phase, 2V Hz Poles Phase Output (HP) Voltage (V) 60 2 Three Applicable Model Name-Plate Rating No Load Test Resistance at 20 C MOTOR MODEL 70/076 70/106 70/ / / / / / /6 Output HP kw Phase Poles Volts Amperes Speed Insulation Class F F F F F F F F F Amperes Watts Ohms Current Amp % Load Efficiency % Power Factor % Speed RPM Locked Rotor Torque LB-FT Start Current Amp Number Starts per Hour Voltage Tolerance % -6 to ((803) (803) (fax) rev. 08/15

25 Model Electrical Data 3/4 to 3 hp, Three Phase, 460V Hz Poles Phase Output (HP) Voltage (V) 60 2 Three Applicable Model Name-Plate Rating No Load Test Resistance at 20 C MOTOR MODEL 70/076 70/106 70/ / / / / / /6 Output HP kw Phase Poles Volts Amperes Speed Insulation Class F F F F F F F F F Amperes Watts Ohms Current Amp % Load Efficiency % Power Factor % Speed RPM Locked Rotor Torque LB-FT Start Current Amp Number Starts per Hour Voltage Tolerance % -6 to ((803) (803) (fax) rev. 08/15